Beruflich Dokumente
Kultur Dokumente
The MA-40 and 550 models come standard with ßat base. two 1/2" x 10" anchor bolts, wall bracket and rotor plate
mounted on top of top section. No guying is required when tower is properly bracketed to the eve of your roof.
MA-Series towers are completely self-supporting only when used with accessory MARB or MAB Series bases. The
MARB Series rotor base allows the entire tower and antenna to be rotated from the base (rotor not included). This
provides for easy rotor maintenance plus emergency hand rotation of the entire tower and antenna.
The MA-550MDP, 770MDP and 850MDP models include a heavy duty motor drive with positive pull down. The
MDP models provide motorized raising and lowering of the tower. A remote control unit (RMC-1000) accessory is
available that allows raising and lowering from your ham shack or other remote location.
All models without motor drives come standard with manual hand winches which have load actuated brakes for
maximum safety. This feature prevents the winch from free-wheeling and causing injury to you or your installation
in the event that you lose your grip during raising or lowering.
All steel used at US Tower conforms to ASTM speciÞcations. All welding is done by certiÞed factory personnel. All
of our towers are factory tested by trained personnel before leaving the plant.
Plywood template*
2" x 4" spacer*
(Tack on to template)
Plywood template*
2" x 4" spacer*
Finish grade
Form*
Anchor Bolts (size Tower base hole size and rebar are for illustration only, current
varies with tower size) UBC engineering calculations should be used to determine
1/2 " reinforcing bars your speciÞc installation.
shall extend to within Rebar is not provided by US Tower. MA-40 & 550 use their
3" of both top and standard base as a template. These standard bases use only
bottom of footing 2 bolts and require no rebar. Wooden template included with
3/8" 0 tie bars @ 12" MAB & MARB bases.
O.C.
Because of wide variations throughout the country in zoning
Undisturbed soil requirements and loading conditions (snow, wind, ice, etc.), it
is the responsibility of the customer to make Certain that his The factory reserves the right to
*To be removed after Tower conforms to all applicable codes. We recommend you make changes or modiÞcations
base is installed. obtain all necessary permits prior to purchase . without notice.
112 Phone Orders West 1-800-854-6046 • Mountain / Central 1-800-444-9476 • Southeast 1-800-444-7927
MA-SERIES ACCESSORIES
The Customer is
Model Description Weight Responsible
for obtaining all local city or
county building and tower
MAF Raising Fixture permits
MAF-Series Raising Fixture accessory for easy raising and AND
for taking the tower off the
antenna servicing. For use with MARB and MAB bases. freight truck when it is de-
MAF-40 Raising Þxture for MA-40 35# livered. Please arrange for
adequate help.
MAF-550 Raising Þxture for MA-550 70#
MAF-770 Raising Þxture for MA-770 75#
MAF-850 Raising Þxture for MA-850 80#
MAF
IV-16 The IV-16 slips over the top of the mast 5# Remote Control Accessories
and rests at the top of the tower to hold
inverted vee antennas. The IV-16 cannot RMC-1000 Relay operated remote control for 18#
be used with the MARB rotator base. raising and lowering your tower from your
ham shack or other remote location.
MCL-100 Limit switch control package includes 7#
limit switches, limit switch brackets,
Call Toll-Free for Discounts on and control box at the base of the tower.
U.S . Towers and Accessories
The TMM Series towers are lightweight, freestanding crank-up towers that The TMM-433SS will accept the MD-75 motor drive accessory. The TMM-
allow up to 18 square feet of antenna in 50 mph winds per EIA speciÞca- 433HD and 541SS will accept the MD-75 and MDP-750 accessory motor
tions. The TMM-433HD handles 24 square feet.These lightweight towers drives. The MDP-750 motor drive accessory is compatible with both of our
should provide many years of trouble free service.All of our towers have MCL-100 and RMC-1000 limit switch packages (see accessories).
a hot dipped galvanized Þnish inside and out.
TX SERIES
US Tower’s freestanding TX Series crank-up towers are as strong or towers include Fulton hand winches (except MDP and MDLP models)
stronger than most competitors’ heavy-duty models. The TX Series tow- which feature automatic load actuated brakes for maximum safety. Masts
ers have 21 foot sections with 4 foot overlap to provide extra height and and motor drives are available as accessories (see accessory page).
strength. In addition, the overlap helps prevent binding while lowering
your tower in high wind and conditions. The TX-472MDP comes complete with MDP-750 motor drive and limit
switch brackets. The TX-489MDPL includes the MDPL-1000 motor drive
The TX Series towers have a large enough top section (12 1/2'’) to permit and limit switch brackets. Limit switch assemblies and remote raising
installation of most rotators inside the section for maximum strength while devices are available (MCL-100) (RMC-1000) for all MDP-750 and MDPL-
allowing the section to fully retract. Cross bracing at critical points on the 1000 motor drive units (see accessory page for description).
tower ensures safety and additional strength. All US Towers crank-up
towers have a heavy-duty, hot dipped galvanized Þnish both inside and US Tower’s TX Series requires no guying.The wind loading is calculated
out, which should provide many years of trouble free service. at 18 square feet of antenna in 50 mph winds per EIA speciÞcations.To
assist you in applying for necessary construction permits, Uniform Building
The TX Series towers come complete with rotator plate and base hardware Code calculations are available for most models.
which includes, large steel anchor bolts and heavy-duty steel T-base that
allows the tower to hinge on for easy installation. All T-bases will accept US Tower’s HDX Series heavy-duty crank-up towers have up to 2 1/2
the TRX Series raising Þxtures for easy one man installation. All TX Series times more windloading capacity than others commonly advertised.
HDX SERIES
This superior strength allows for large stacked arrays, while using our and MDPL-1000 motor drives may use the RMC-1000 accessory limit
commercial type bases and anchor bolts that can be easily installed switch package which allows the raising and lowering of your tower from
and vertically adjusted. All HDX Series T-bases are designed to use our the comfort of your ham shack or any remote location. MCL-100 is also
TRX Series raising Þxtures to make installations and antenna servicing available (see accessory page).
a one man job.
All HDX Series towers come complete with rotator plate, anchor bolts
ModiÞed top sections for the HDR-300 rotators are available at a small and heavy-duty T-base (doubles as template). US Tower’s special T-base
additional cost. US Tower carries as accessories many different sizes and design allows the tower to hinge for easy installation. US Tower’s crank
strengths of masts which can be used with the HDX Series towers. The towers do not require guy wires. The HDX Series towers are rated at 30
HDX-572MDPL and 589MDPL motorized towers provide dual level wind, square feet of antenna at 50 mph winds per EIA speciÞcations. To assist
positive pull down and heavy duty gear box features. The HDX-572MDPL you in getting a construction permit, Uniform Building Code calculations
comes only with limit switch brackets. The HDX-589MDPL comes com- are available for most towers.
plete with the MCL-100, limit switch package. All towers using MDP-750
Anchor Bolts
(size varies with tower size)
Undisturbed soil
114 Phone Orders West 1-800-854-6046 • Mountain / Central 1-800-444-9476 • Southeast 1-800-444-7927
SELF-SUPPORTING CRANK-UP TOWERS
Tower SpeciÞcations
The
COMPACT TMM-SERIES CRANK-UP TOWERS Customer
is
Responsible
for obtaining
all local city or
county build-
ing and tower
permits
AND
for taking the
tower off the
freight truck
when it is de-
TX-SERIES FREE-STANDING CRANK-UP TOWERS livered. Please
arrange for
adequate help.
TMM-541SS
TX-455
HDX-555
The factory reserves the right to make changes or modiÞcations without notice.
Remote Control
Model Description Weight
Motor Drives
Model Description Weight
116 Phone Orders West 1-800-854-6046 • Mountain / Central 1-800-444-9476 • Southeast 1-800-444-7927
CRANK-UP ACCESSORIES
Model Description Weight
Service Platform
HDP Large service platform with safety railings to 125#
provide a safe and comfortable surface while
installing or maintaining your antenna and
rotator.
Tower Accessories
CX-2 Set of 2 coax standoff arms 6#
CX-3 Set of 3 coax standoff arms 8#
CX-4 Set of 4 coax standoff arms 10#
CX-5 Set of 5 coax standoff arms 13#
Masts
Reinforced
Galvanized Mast
US Tower offers two different types of masts. The M-5, 10, 15 and 20
masts have .120" wall thickness. The M-15R and 20R have steel pipe
inserts in the lower half of the mast which provides extra strength where
most needed without adding unnecessary weight in the top portion.
The M-15R and 20R have a wall thickness of .250".
118 Phone Orders West 1-800-854-6046 • Mountain / Central 1-800-444-9476 • Southeast 1-800-444-7927
General Information for Our Valued Customers
Easy Ordering Delivery New Equipment Returns
Six toll-free 800 numbers are available for orders. Free UPS Ground Transportation in the continental Products are not sold for evaluation. Under some
They are located throughout the United States. This US on most items over $100. circumstances (at the discretion of HRO) and with
provides personnel at one location or another to prior approval of the store of purchase, HRO will
answer your questions for extended hours Monday All Alaska and Hawaii shipments via UPS must be accept an item for return. Under most circumstances
through Saturday. You will Þnd the same low prices shipped by Blue Label (2nd Day Air) or Red Label a 15% restocking fee and all freight charges will be
at all locations and, thanks to computers, we have the (Overnight). Please ask for charges. assessed.
stock levels of all locations available to each salesper-
son for estimates of availability and delivery. In a Hurry? If necessary to expedite shipments, UPS Your means of refund for returns will be the same as
has Red Label (overnight), Blue Label (2nd-day) and that used for your original payment except for cash,
24 Hour "On-Line" Ordering is now available on the Orange Label (3 day) services available at an extra which will be refunded by check. HRO will pay from its
INTERNET! URL is http://www.hamradio.com cost. Please request charges for these services. corporate ofÞces. It can take up to two weeks.
Shipments are made from any of our 12 locations that Foreign Deliveries We ship world-wide. Contact our Defective merchandise may be returned within 10
has the particular items you need in stock. In most stores, preferably by fax, with your needs. We can days of the original purchase for exchange. Original
cases, the shipment will be made from the location give you quotes and details for placing your foreign receipt must accompany the return. Items returned
nearest you (if stock is available). HRO is trying to order. Payment methods include wire transfer direct for warranty replacement consideration must also
provide the quickest shipments in the industry using to our bank as well as payment by VISA/ MC charge include a completed, signed, "Warranty Replacement
these methods. cards or check drawn in U.S. Funds from a U.S. Bank. CertiÞcation Form." Customers who return equip-
Shipments are made (depending on size) by UPS, ment for replacement consideration without this form
California customers can now order using a toll-free FED EX, Emery, DHL, or international air mail. Some completed and signed cannot be considered for any
number. The number is 1-800-854-6046. It is no orders to some foreign countries cannot be insured possible warranty replacement, only warranty repair.
longer necessary for California customers to pay for to the full value. No exceptions. Contact your salesman for details.
the phone call.
Truck Delivery On day of delivery, if by truck, please
be sure to have enough help, and / or proper equip- Manufacturer's New
Sales Tax ment on hand for unloading merchandise. Truck
Equipment Warranties
State and local laws require us to collect and remit drivers are NOT required to provide assistance. If
State sales / use tax on orders shipped from any of Ham Radio Outlet supports all manufacturers' war-
you are not experienced at handling large, awkward
our 12 locations INTO Arizona, California, Colorado, ranties. Actual warranty terms are included within the
items such as towers, antennas or ampliÞers, please
Georgia, or Virginia. shipping container of most items. If needed, you may
ask properly trained people to assist you.
request from any of our locations a free copy of the
You will Þnd that this small extra charge will be more manufacturer’s written terms for any warranteed prod-
Canadian Orders can now be shipped via UPS. These
than overcome by the convenience of the largest ham uct. Please request by model number and indicate the
costs will be added to your invoice.
radio inventories in the United States. You will also Þnd page in this catalog that represents the product.
courteous and knowledgeable salespeople to assist
you. We think you will Þnd HRO to be the company Damaged Items Ham Radio Outlet will in many cases provide in-store
repairs; please contact the store of purchase for in-
you want backing you when it comes to dealing with UPS If the item is obviously damaged, note this
any problems you might have with manufacturers or with the driver and refuse shipment. This item will formation. It will be necessary to provide us with the
shipping companies. be returned to HRO and another will be sent at no invoice number and purchase date, as most manu-
additional charge. If hidden damage is noted, contact facturers need this information to process under their
UPS as soon as possible. They will arrange pickup. FREE warranty repair terms.
Phone Orders Once the item is received by HRO, a replacement
To place a phone order using a credit card, please
have the following information available if you are a
will be sent. New Equipment
Þrst-time caller or have not made a recent purchase TRUCK If there is damage or the shipment is short, Warranty Returns
from HRO. We will ask for your callsign (if any), credit it is the customer's responsibility to Þle the claim with When returning equipment for repair, please pack
card number, expiration date, your home telephone the trucking company. At the time of receipt of item, it the item in original packing material or something
number, and possibly the name, address, and tele- is recommended that you have the driver write “dam- similar to provide adequate protection during the
phone number of the bank listed on your charge card aged” or indicate shortage on the bill of lading he gives shipping process. Note on box: “ATTENTION SER-
statement. to you. Be sure to have the same notation as well as VICE.” Include a copy of your purchase invoice, and
drivers signature on his copy also. a complete and detailed description of the problems.
Without the invoice or a complete description, delays
Payment MAIL It is the customer’s responsibility to Þle all loss will be experienced in providing the proper service
We accept Visa, MasterCard, American Express, and or damage claims with the postal department. and returning the item to you. Be sure to insure the
Discover Card. Personal checks are also accepted; package for its replacement cost.
however, processing time will delay shipment by
some 10 days. When using a credit card, please Prices HRO will repair or replace the defective item at our op-
have the card in front of you since we will need all Many prices shown are suggested list price. In most
cases we offer large discounts. Equipment manu- tion. If the item is found to be defective under the terms
the information, including the name of the issuing of the manufacturer’s warranty, no charge will be made
bank. If the card holder's BILLING address differs facturers constantly change prices, offer specials or
react to the Dollar / Yen exchange rates. Simply call for service or return shipping within continental USA.
from the shipping address, please be sure to specify It is the customer's responsibility to ship all defective
both addresses and telephone numbers. For your one of our 800 numbers and our staff will be happy
to quote you the current selling price of the item you items to the service center for warranty repair.
protection, we thoroughly investigate the validity of
all credit card purchases. are interested in. Prices are subject to change without
notice or obligation to the customer. Sorry, we cannot
honor typos in this catalog.
Problems
HRO prides itself in its ability to service the customer.
COD Orders Software If there is a problem please contact the manager of the
COD payments must be made in cashiers check or store from which you purchased the merchandise. If
money order at the time of delivery. There is a small Software is sold on a non-returnable basis. Any soft- for some reason, your problem cannot be corrected by
fee for COD shipments. ware problems will be resolved under the terms of the that store manager, please feel free to call Ham Radio
manufacturer's warranty. Outlet Corporate Headquarters at (925) 831-1771 and
explain the situation. At this point our national sales
Commercial Sales Lost Items staff will see that your problem is corrected.
Western Eastern
Canada & US Canada & US
1-800-854-6046 1-800-444-0047
Portland, OR
(503) 598-0555 1-800-854-6046 Salem, NH
(603) 898-3750
Oakland, CA
(510) 534-5757
New Castle, DE
Sunnyvale, CA Denver, CO 1-800-644-4476 (302) 322-7092
(408) 736-9496 (303) 745-7373
Woodbridge, VA
Burbank, CA 1-800-444-4799 (703) 643-1063
(818) 842-1786
1-800-444-9476
Anaheim, CA
(714) 533-7373 Phoenix, AZ Atlanta, GA
San Diego, CA (602) 242-3515 (770) 263-0700
(858) 560-4900 1-800-444-7927
1-800-854-6046
Includes California
st a
San
Fer Vi
W. V nan ena
ic tory do Bu Burbank
Blvd West
5
5 Off Ramp
Burbank Blvd
Chandler
N
Victory Blvd
Buena Vista
Beachwood
5
285
Sparks
Magnolia
Alameda
5
Bob Hope Dr.
85
55
SR 134 Ventura Fwy
Buena Vista Griffith Park
Off Ramp
ANAHEIM, CA 92801 Janet KL7MF Mgr ATLANTA, GA 30340 Mark KJ4VO Mgr BURBANK, CA 91506 Eric K6EJC Mgr
933 N. Euclid St. Bill W1HIJ 6071 Buford Hwy. David KE4VDH 1525 W, Magnolia Christie KØIU
Near Disneyland Ted KB6CUS Doraville, 1 mi. north of I-285 Dale W4GCL (818) 842-1786 Rick K6VE
(714) 533-7373 Steve K6CZA Bill K8WF, Denise Mark KC6HMO
(770) 263-0700 (800) 854-6046
Phil AD6NH Josh W4JDH, Jim N1ABM Sud AC6VP
(800) 854-6046 Art K6MIV Denis K9ADB (800) 444-7927 John KI4LMA, Bill W5RQR 24 Hour FAX (818) 842-5283 Amy AF6BK
24 Hour FAX (714) 533-9485 Heiko AD6OI 24 Hour FAX (770) 263-9548 Michael K8YOY Email: burbank@hamradio.com Tom K6WAC
Email: anaheim@hamradio.com Email: atlanta@hamradio.com Zach KI4CJF
120 Phone Orders West 1-800-854-6046 • Mountain / Central 1-800-444-9476 • Southeast 1-800-444-7927
All Stores Open 10am - 5:30pm Monday - Saturday STORE LOCATIONS
To San Francisco
TO PHILADELPHIA
I-880
WILMINGTON
5th Ave
95 Embarcadero
3
Exit
Y1
Embarcadero
HW
880
Livingston
TO N
EW JE
RSEY
Oakland
Estuary
295
Cotton
225
3
T.1
TO MARYLAND
it
Ex
YR
HW H
Dennison
NT RT
e
25 DELAWARE
I-880
Av
PO NO
rd
MEMORIAL
23
BRIDGE
DU
To Oakland Airport
DENVER, CO 80231 John N5EHP Mgr NEW CASTLE, DE 19720 Rick K3TL Mgr OAKLAND, CA 94606 Mark WI7YN Mgr
8400 E. ILIFF Ave. #9 Jay KØKRK 1509 North Dupont Hwy, US13 Jim KJ3N 2210 Livingston St. Don W6ER
(303) 745-7373 Russ KAØULN Parkway Plaza Bob N9GG, I-880 at 23rd Ave. Ramp Bob KK6F
(800) 444-9476 Kent KØTKM (302) 322-7092 Andrew N3NZS (510) 534-5757 Vern K6VXY
Mike KCØSM Joe KI3B David AD6ME
24 Hour FAX (303) 745-7394 (800) 644-4476 Joe K3JV
(800) 854-6046 Dave N6SWE
Email: denver@hamradio.com 24 Hour Fax (302) 322-8808 Dale KB3FEI 24 Hour FAX (510) 534-0729 Rick N6DQ
Email: newcastle@hamradio.com Email: oakland@hamradio.com Rob KG6SKA
HWY 126
84
BEAVERTON
PORTLAND
5 205
HWY
217
EXIT 294
17
10
10 HWY OREGON
10 TIGARD CITY
99W
PHOENIX, AZ 85021 Gary N7GJ Mgr PORTLAND, OR 97223 Leon W7AD Mgr SALEM, NH 03079 Chuck N1UC Mgr
Nick K1JYA, Bob N1EUN
1939 W Dunlap Kathy N7AQM 11705 S.W. PaciÞc Hwy (99W) Dan N7UDE 224 N. Broadway D-12 Barry N1DNU
(602) 242-3515 Mike K7DD, Rick N7VAB Suite Z Ron W7ATX 28 mi. N of Boston, Exit 2, I-93 Peter KI1M, Larry W1MW
Steve W7QY Pat K7PWN
(800) 444-9476 (503) 598-0555 (603) 898-3750 Cal WA1WOK, Dave N1EDJ
Paul KD6TAQ Phil W7AR
24 Hour FAX (602) 395-1244 Morgan WW7B (800) 854-6046 Roy W6II (800) 444-0047 Steve W1FSK
Email: phoenix@hamradio.com 24 Hour FAX (503) 684-0469 24 Hour FAX (603) 898-1041 Greg K1GTS, Dave N1IX
Jim KE7EEU Martin W7MSO
Email: portland@hamradio.com Email: salem@hamradio.com Jim W1KQ, Valdo
Ralph W7JU
ol Beltw
pital
ay
ltway
Capit
Ca
495
I-495
1
S
1U
101 95
US
I-95
From I-95
North
805
RT 123
POTOMAC
MILLS OPTIZ BLVD
BUILD AMERICA
BUILD AMERICA 7
Rippon Landing BUSINESS CENTER
From I-95 EXIT 156
South Exit 152
USS
RT 234
11
EXIT 152
SAN DIEGO, CA 92123 Tom KM6K Mgr SUNNYVALE, CA 94085 Howard W6HOC Mgr WOODBRIDGE, VA 22191 Steve W4SHG Mgr
5375 Kearny Villa Rd. Jose XE2SJB 510 Lawrence Expwy, #102 Rob W6KR 14803 Build America Drive Rocky N4SR
Hwy. 163 & Clairemont Mesa Blvd. Jerry N5MCJ (408) 736-9496 George K6SV Exit 161, I-95 South to US 1 Scott KT4ER
Art KG6NIZ Paul W6EQB Joe N4JCS
(858) 560-4900 (800) 854-6046 (703) 643-1063
Wil AC6DC Bill K9ZD
(800) 854-6046 24 Hour FAX (408) 736-9499 Dan K6DN, Don N6MCE (800) 444-4799 Mary KI4KPN
24 Hour FAX (858) 560-1705 Email: Ken KG6PO 24 Hour FAX (703) 494-3679 Mike N4MDK
Email: sandiego@hamradio.com sunnyvale@hamradio.com Jon K6WV Email: woodbridge@hamradio.com Camden N2CLB
122 Phone Orders West 1-800-854-6046 • Mountain / Central 1-800-444-9476 • Southeast 1-800-444-7927