Beruflich Dokumente
Kultur Dokumente
Release Notes
GE Publication Number: GER-4628
Copyright 2013 GE Multilin
Overview
Summary
GE Multilin releases the F650 Feeder Management Relay & Bay Controller Firmware version 5.68 and
software version 6.24.
Highlights of this release include:
Configuration and PLC project files classified as per model and version.
Note:
Firmware version 5.68 is compatible with Enervista 650 Setup Software version 6.24 and
F650 relays with hardware version 01 or higher and Bootware version 6.00.
Please refer to Chapter 8 of the Instruction manual for detailed directions on Bootcode and
Firmware upgrade. The F650 Instruction Manual is available at the GE Multilin website:
http;//gemultilin.com/
GE Multilin
For upgrade to new Hardware version 04, please contact Multilin Technical Support Team
for the appropriate hardware package.
The hardware version of the F650 relay can be verified from the device identification label.
Alternately, it is also available from the EnerVista 650 Setup software version 3.00 or higher
(while communicating with the relay).
Release details
In the following enhancement descriptions, a revision category letter is placed to the left of the description.
Refer to the Appendix at the end of this document for a description of the categories displayed.
Minimum value for voltage supervision on frequency functions 81O and 81U changed from 20V (as
today) to 10V.
Enhanced the reception of the setpoint values by the I/O boards when the relay boots up.
Enhanced the non-ascii characters of the Turkish, Spanish and French languages to avoid problems
when printing them on the different HMI displays.
Fault Report information for the three phases are now available on the Chinese language HMI.
Improved the response on communication through DNP 3.0 serial, when relays are daisy chain
connected and a high traffic of messages is received.
When using IEC103, the relay now sends MW, Mvar, PF ... information, for both positive and negative
values.
GE Multilin
Configuration and PLC project files classified as per model and version.
The configuration files .650 and PLC projects have been classified, enabling an easier search.
Revised for application and use with firmware version 5.68 and Bootware version 6.00.
GE Multilin
Upgrade paths
In order to take advantage of the enhancements and new features introduced in the latest F650 release, we
recommend that you upgrade to the new F650 Firmware version 5.68.
Firmware upgrades can be easily performed using 650 set up software. This upgrade can be done either via
EnerVista Launchpad or by direct download from the following site:
http://gemultilin.com/software/F650
2.
3.
Click Check Updates. Note: this will check for updates to all of the IED setup software shown.
4.
Please contact your local GE Multilin sales representative or GE MultilinTechnical Support Team for any
questions regarding this upgrade.
GE Multilin
Appendix
Change categories
This document uses the following categories to classify the changes.
Table 1: Revision categories
Code
Category
Comments
New feature
Change
A neutral change that does not bring any new value and is not correcting
any known problem
Enhancement
Changes to, or problems with text messages, LEDs and user pushbuttons
Metering
Unavailability of protection
False trip
Unexpected restart
The revision category letter is placed to the left of the change description.
GE Multilin