Beruflich Dokumente
Kultur Dokumente
STTC/MLY
CLASS TEST
ANSWER THE FOLLOWING QUESTIONS:
1. Write the applications of following telecom cable.
a. PCQT
b. CAT-5
c. 6 quad
d. FS
e. SB
b. SCR
c. ICs.
b. 3
c. 17
b. quad
c. none
b. 56 ohms
c. 5600 ohms
b. emitter
c. none
5. SCR is having
a. Three terminals
b. Two terminals
c. Four terminals.
6. For extending the control circuit to way station the joint to be made is
a. Transformer joint b. Derivation joint
c. Condenser joint.
b. 2000 mts
c. 500mts
8. Under normal condition of traction power system the longitudinally induced voltage
should not be exceed in telecom cable is
a. 150v RMS
b. 600v RMS
c. 60v RMS.
b. 0.63 dB
c. 0.25 dB
5. The induced voltage in lead sheath cable would be more than alimunimum sheath (
6.OFC cable communication works under the principle of LOS
(
(
)
)
)
)
2. Semiconductor
3. OFC
c. In battery charger
4. Micron
d. Mutual inductance
5. PICO
e . Insulation resistance
6. Inductance
7. SCR
g. Watt
8. FET
h. Silicon
9. Megger
i. Henries
10. Power
)
)
)
)
8. Power cable can be laid in same trench in which telecom cable is laid. . (
9. The cable drum length of 6 quad cable is 500mts. . (
10. Normal joint is done at every 1000 mts in 6 quad cable. . (
)
)
10. Power supply unit in C-DOT exchange is a DC-DC converter and --------------11. Line card is interface between the subscriber and --------------Expand the following:
1. C-DOT
2. DTMF
3.EPBT
4.LCC
5.TIC
6..SN
7. SP
8.SPC
9.PSU.
CLASS TEST
ANSWER THE FOLLOWING QUESTIONS:
1. Write the basic functions of Electronic exchange?
2. Draw the block diagram of C-DOT 128 port exchange and explain the same.
3. Write the names of cards available in C-DOT 128 port exchange.
4. Write the features available in SPC exchange.
5. What is copy 0 and copy 1 in C-DOT 128 port exchange.
6. Write the types of tones available in C-DOT 120 port exchange and their frequencies.
7. Draw the block diagram of Selective calling telephone and explain.
8. Write the basic functions of Auto phone and explain the same.
9. Write the difference between control phone and auto phone .
10. Write short notes on
a. Polarity guard circuit .
b. Advantages of EPBT
c. Control phone
d. Port allocation in C-Dot 128 ports exchange.
21.01.10
Name :
Batch No:
a. C-DOT
b. 56 ohms /Km
c. OFC
d. Portable telephone
5. EC socket
e. 470 ohms
6. RCP card
f. isolation transformers
7. Cable hut
g. 22 db
8. LD devices
h. 10 ohms
I high voltage
j. Once in a month/
21.01.10
Name :
Batch No:
OBJECTIVE
I. FILLIN THE BLANKS:
1. Frequency Range of VHF band is ----------2. Frequency range of UHF band is ----------3. Frequency band allotted to Railways MW communication
from --------- to --------4. FAS 7000 radio equipment is having a capacity of -----channels.
5. Fading is fluctuation in signal strength at --------
end.
)
)
2. Toshiba 7D20
b. Outdoor use
3. Harris
c. Indoor use
d. QPSK
5. Column speakers
e. 3.825 Khz
6. SSB Receiver
f. Yard communication
7. Signaling
8. Digital MW
h. 300 channels
9. Wave guide
i. Product detector.
j. Platform.