Beruflich Dokumente
Kultur Dokumente
STYLUS-7030 /
-7030
Instruction Manual
Thank you for purchasing an Olympus digital camera. Before you start to
use your new camera, please read these instructions carefully to enjoy
optimum performance and a longer service life. Keep this manual in a
safe place for future reference.
The application software and instruction manual PDF file are stored on
the internal memory of the camera.
We recommend that you take test shots to get accustomed to your
camera before taking important photographs.
In the interest of continually improving products, Olympus reserves the
right to update or modify information contained in this manual.
The screen and camera illustrations shown in this manual were produced
during the development stages and may differ from the actual product.
Step
Strap
USB cable
AV cable
or
Digital camera
USB-AC adapter
(F-2AC)
Other accessories not shown: Warranty card
Contents may vary depending on purchase location.
Step
Step
Step
Step
Printing
Contents
Names of Parts .............................. 6
Settings ........................................ 41
Erasing ......................................... 15
Printing ......................................... 47
Using Shooting Modes................ 22
Usage Tips ................................... 52
Using Shooting Functions .......... 27
Appendix ...................................... 57
Menus for Shooting Functions ... 31
EN
Camera Settings
Using the Direct Buttons
Frequently used functions can be accessed using the direct buttons.
Operation guide
The symbols FGHI displayed for image selections
and settings indicate that the wheel controller is to
be used by pressing, not turning, the wheel controller
sections shown below.
4/30
X
Y
M D
TIME
2010 . 02 . 26 12 : 30
NORM 14M
FILE 100 0004
10/02/26 12:30
Y/M/D
CANCEL MENU
SET OK
PRINT OK
MORE
SINGLE PRINT
Wheel controller
F (up) /
INFO button (changing
information display) (p. 17, 20)
Shutter button (p. 15, 52)
H (left)
I (right)
G (down) /
D button (erase) (p. 19)
Operation guides displayed at the bottom of the screen
indicate that the m button, A button, or zoom
buttons can be used.
1
IMAGE SIZE
COMPRESSION NORMAL
SHADOW ADJUST
AUTO
AF MODE
FACE/iESP
ESP
ESP/
FINE ZOOM
OFF
DIGITAL ZOOM
OFF
1
2
3
EXIT MENU
14M
SEL. IMAGE
SET OK
SET OK
OK
ERASE/CANCEL MENU
Operation guide
EN
Shooting
PROGRAM AUTO
P
0.0
WB
AUTO
ISO
AUTO
Shooting
mode
SLIDESHOW
PHOTO SURFING
EVENT
Function
menu
BEAUTY FIX
EDIT
ERASE
o [SETUP]
menu
4 14M
To select the shooting mode
Use HI to select the shooting mode and
press the A button.
To select the function menu
Use FG to select a menu and use HI to
select a menu option. Press the A button to
set the function menu.
Playback
COMPRESSION NORMAL
SHADOW ADJUST
AUTO
AF MODE
FACE/iESP
ESP
ESP/
FINE ZOOM
OFF
DIGITAL ZOOM
OFF
2
3
WORLD TIME
VIDEO OUT
SET OK
POWER SAVE
WORLD TIME
VIDEO OUT
POWER SAVE
Submenu 1
--.--.-- --:--
OFF
WORLD TIME
POWER SAVE
X
VIDEO OUT
NTSC
--.--.-- --:-x
NTSC
OFF
EXIT MENU
SET OK
EXIT MENU
SET OK
WORLD TIME
VIDEO OUT
POWER SAVE
--.--.-- --:--
OFF
1
--.--.---:-POWER
SAVE
WORLD TIME
HOME
VIDEO OUT
POWER SAVEOFF OFF
ON
EXIT MENU
VIDEO OUT
NTSC
EN
x
NTSC
ON
2
3
EXIT MENU
SET OK
EXIT MENU
SET OK
SET OK
IMAGE SIZE
COMPRESSION NORMAL
SHADOW ADJUST
AUTO
CONFLICTING
SETTINGS
AF
MODE
iESP
ESP/*1
ESP
FINE ZOOM
OFF
DIGITAL ZOOM
OFF
1
2
--.--.-- --:--
Page tab
14M
EXIT MENU
SETUP
Use FG to select a menu and press
the A button.
EXIT MENU
14M
SET OK
Menu Index
Menus for Shooting Functions
PROGRAM AUTO
0.0
WB
AUTO
ISO
AUTO
4 14M
1
2
3
4
5
6
7
8
IMAGE SIZE
COMPRESSION 1 NORMAL
R
SHADOW ADJUST
AUTO
2 IMAGE STABILIZER
AF MODE
FACE/iESP
REC VIEW
ESP
ESP/
ICON GUIDE
FINE ZOOM
OFF
1
DIGITAL ZOOM
OFF
1
2
3
14M
1
2
OFF
ON
IMAGE SIZE
ON
FRAME RATE
ON
IS MOVIE MODE
R
6
7
8
9
OFF
ON
EXIT MENU
SET OK
1
2
EXIT MENU
SET OK
EXIT MENU
1 Shooting mode
P (PROGRAM AUTO) .......p. 15
M (iAUTO) ....................p. 22
s (SCENE MODE) ......p. 22
P (MAGIC FILTER) .....p. 23
p (PANORAMA) ...............p. 24
Q(BEAUTY) ................p. 26
A (MOVIE) .......................p. 16
2 Flash..................................p. 27
3 Macro ................................p. 27
4 Self-timer ...........................p. 28
5 Exposure compensation ....p. 28
VGA
30fps
White balance....................p. 28
ISO ....................................p. 29
Drive ..................................p. 30
o (SETUP)
IMAGE SIZE (Still images)
.......................................p. 31
IMAGE SIZE (Movies) .......p. 31
COMPRESSION (Still images)
.......................................p. 31
FRAME RATE (Movies) .....p. 31
SHADOW ADJUST ...........p. 32
AF MODE ..........................p. 32
SET OK
ESP/n ............................p. 32
FINE ZOOM ......................p. 33
DIGITAL ZOOM .................p. 33
R (Still images) ..................p. 33
R (Movies) .........................p. 33
IMAGE STABILIZER
(Still images)/
IS MOVIE MODE
(Movies).............................p. 34
REC VIEW.........................p. 34
ICON GUIDE .....................p. 34
1
2
3
4
5
6
7
1
2
PRINT ORDER
0
y
R
1
2
3
EXIT MENU
SET OK
SETUP
1
2
3
4
5
SLIDESHOW .....................p. 35
PHOTO SURFING.............p. 35
EVENT q ........................p. 36
COLLECTION q .............p. 36
BEAUTY FIX......................p. 37
6 EDIT ..................................p. 37
7 ERASE ..............................p. 39
8 o (SETUP)
PRINT ORDER ..................p. 39
0 (Protect) .....................p. 39
y (Rotate).........................p. 40
R (Add sound to still images)
.......................................p. 40
1
2
3
INTERNAL/SD
MEMORY FORMAT
DATA REPAIR
COPY
AUTO
ENGLISH
1
2
RESET
USB CONNECTION
EXIT MENU
PC
SET OK
1 r (Settings 1)
INTERNAL/SD...................p. 41
MEMORY FORMAT/
FORMAT............................p. 41
DATA REPAIR ...................p. 41
u COPY.....................p. 41
l (Language) ................p. 41
RESET...............................p. 42
USB CONNECTION ..........p. 42
2 s (Settings 2)
q POWER ON ................p. 42
EN
Names of Parts
Camera unit
5
10
1
2
3
4
5
EN
6
7
8
9
10
3
4
7
8
9
5
1
2
3
4
5
6
7
10
Shutter button......................... p. 15, 52
n button........................ p. 13, 15
Zoom buttons ......................... p. 17, 19
Monitor ......................... p. 8, 15, 44, 52
m button .............................. p. 3, 4
Indicator lamp......................... p. 11, 12
q button (switching between shooting
and playback) ................... p. 16, 18, 42
8
9
10
EN
Monitor
Shooting mode display
22
21
20
19
0.0
P
WB
AUTO
ISO
AUTO
4 14M NORM
1
3
4
5
6
7
8
9
11
0.0
21
19
WB
AUTO
00:34 VGA
ON
18 17 16 15 14 13 12
18 1716 15 14 13 12
1/100
F3.0
Movie
24
23
4
5
6
7
10
11
Still image
1
2
3
4
5
6
7
8
9
10
11
12
13
EN
14
15
16
17
18
19
20
21
22
23
24
Metering ....................................... p. 32
Shadow Adjustment Technology
.................................................... p. 32
Compression (still images) ..... p. 31, 60
Frame rate (movies) ............... p. 31, 60
Image size .............................. p. 31, 60
Number of storable still pictures
(still images) ........................... p. 15, 60
Remaining recording time (movies)
.............................................. p. 16, 60
Current memory ........................... p. 59
Histogram ..................................... p. 17
AF target mark ............................. p. 15
Camera shake warning
Aperture value .............................. p. 15
Shutter speed ............................... p. 15
2 3 4
5 6
10
4/30
10/02/26 12:30
00:12/00:34
17
Still image
Movie
Advanced display
2 3 4
5 6
10
4/30
1/1000 F3.0
2.0
ISO WB
AUTO AUTO
NORM 14M
FILE 100 0004
10/02/26 12:30
1
2
3
4
5
6
7
8
9
10
9 10 11
2.0
7 22 1/1000 F3.0
ISO WB
21
P
AUTO AUTO
20
19
NORM 14M
18
FILE 100 0004
12
13
14
15
16
10/02/26 12:30
17
11
12
13
14
15
16
17
18
19
20
21
22
Exposure compensation............... p. 28
White balance .............................. p. 28
Compression (still images) ..... p. 31, 60
Frame rate (movies) ............... p. 31, 60
Image size .............................. p. 31, 60
Drive ............................................. p. 30
File number
Date and time ......................... p. 13, 44
Metering ....................................... p. 32
Shadow Adjustment Technology
................................................... p. 32
Flash ............................................ p. 27
Shooting mode ....................... p. 15, 22
Macro ........................................... p. 27
EN
System requirements
Windows XP (SP2 or later)/Windows Vista/
Windows 7
10
EN
Multi-connector
Indicator lamp
2
Connector
cover
Computer (on
and running)
Camera setup
Set the camera date and time, time zone
and display language automatically; install
the camera instruction manual and PC
software (ib).
EN
11
Multi-connector
Flashes in red
BATTERY EMPTY
4 14M
Error message
12
EN
Indicator lamp
On: Charging
Off: Charged
----
M D
TIME
. -- . --
-- : --
5
Y/M/D
CANCEL MENU
Seoul
Tokyo
SUMMER
M D
TIME
2010 . -- . --
-- : --
Y/M/D
SET OK
CANCEL MENU
M D
TIME
2010 . 00 . --
-- : --
Y/M/D
CANCEL MENU
EN
13
Write-protect switch
INTERNAL/SD
MEMORY FORMAT
DATA REPAIR
AUTO
COPY
2
3
RESET
USB CONNECTION
EXIT MENU
3
4
5
ENGLISH
PC
SET OK
14
EN
Monitor
Horizontal grip
P
Vertical grip
0.0
WB
AUTO
ISO
AUTO
4 14M
Number of storable still pictures (p. 60)
Monitor
(standby mode screen)
AF target mark
PROGRAM AUTO
P
0.0
Press halfway
WB
AUTO
ISO
AUTO
4 14M
Press the n button again to turn off
the camera.
1/400
Shutter speed
F3.0
Aperture value
EN
15
P
0.0
WB
AUTO
ISO
AUTO
Press fully
1/400
F3.0
00:34 VGA
Press halfway
P
Press fully
00:34
00:12
Recording time
0.0
WB
AUTO
ISO
AUTO
4 14M
REC
16
EN
Zoom bar
0.0
0.0
Press F (INFO).
The displayed shooting information changes in
the order shown below each time the button is
pressed. Shooting mode display (p. 8)
WB
AUTO
ISO
AUTO
4 14M
WB
AUTO
ISO
AUTO
Normal
P
4 14M
Optical zoom: 7x
0.0
WB
AUTO
ISO
AUTO
Digital zoom: 5x
No information
4 14M
Detailed
P
0.0
WB
AUTO
ISO
AUTO
4 14M NORM
Reading a histogram
If the peak fills too much of the frame,
the image will appear mostly white.
When using
digital zoom
Digital zoom
range
EN
17
Viewing images
4/30
Number of frames/
Total number of images
4/30
MOVIE PLAY OK
10/02/26 12:30
Movie
10/02/26 12:30
Playback image
Displays
next image
18
EN
Elapsed time/
Total recording
time
00:12/00:34
During playback
Pausing and
restarting
playback
Fast forward
Rewind
00:14/00:34
During pause
Cueing
Resuming
playback
Single-image view
4/30
10/02/26 12:30
4/30
10/02/26 12:30
T
Index view
10/02/26
To operate with HI
*1
Close-up view
T
10/02/26
ERASE
ALL ERASE
SEL. IMAGE
ERASE
Event index
CANCEL
10/02/26
BACK MENU
SET OK
EN
19
4/30
Press F (INFO).
REPLAY OK
Normal
10
10/02/26 12:30
4/30
No information
10/02/26 12:30
Detailed
10
4/30
1/1000 F3.0
2.0
ISO WB
AUTO AUTO
NORM 14M
100 0004
10/02/26 12:30
FILE
20
EN
EXIT
Submenu 2
SET OK
Application
Search
History
Message
EXIT
SET OK
EN
21
SCENE MODE
0.0
WB
AUTO
4 14M
PORTRAIT
4 14M
4 14M NORM
In some cases, the camera may not select
the desired shooting mode.
When the camera cannot identify the
optimal mode, P mode will be selected.
0.0
WB
AUTO
4 14M
Icon indicating the scene mode
that is set
22
EN
Application
B PORTRAIT/F LANDSCAPE/
G NIGHT SCENE*1/
M NIGHT+PORTRAIT/
C SPORT/N INDOOR/
W CANDLE/
R SELF PORTRAIT/
S SUNSET*1/X FIREWORKS*1/
V CUISINE/d DOCUMENTS/
q BEACH & SNOW/ PET
*1
The camera
takes a picture
using the
optimum settings
for the scene
conditions.
0.0
WB
AUTO
0.0
WB
AUTO
Shooting mode
4 14M
Icon indicating P mode that
is set
MAGIC FILTER
Option
[ POP ART
\ PIN HOLE
] FISH EYE
@ DRAWING
0.0
WB
AUTO
4 14M
EN
23
AUTO
AUTO
Target mark
0.0
WB
AUTO
Application
AUTO
MANUAL
PC
EN
SAVE OK
AUTO
CANCEL MENU
SAVE OK
24
Pointer
CANCEL MENU
4 14M
MANUAL
Direction for
combining the
next frame
PC
BACK MENU
BACK MENU
Joint areas
MANUAL
MANUAL
BACK MENU
CANCEL MENU
After first
shot
PC
SAVE OK
1st frame
MANUAL
CANCEL MENU
SAVE OK
EXIT MENU
EN
25
BEAUTY
0.0
WB
AUTO
4 14M
26
EN
P
P
FLASH AUTO
OFF
0.0
WB
AUTO
ISO
AUTO
0.0
WB
AUTO
ISO
AUTO
4 14M
4 14M
Description
FLASH AUTO
REDEYE
FILL IN
FLASH OFF
Description
OFF
MACRO
SUPER MACRO
*1
*2
*3
*3
EN
27
P
OFF
12
0.0
WB
AUTO
ISO
AUTO
0.0
4 14M
0.3 0.0 0.3
WB
AUTO
ISO
AUTO
Description
Y OFF
Y 12 SEC
Y 2 SEC
WB AUTO
0.0
WB
AUTO
28
EN
ISO
AUTO
Description
WB AUTO
0.0
ISO AUTO
1/400
WB
AUTO
ISO ISO ISO
1600 AUTO HIGH
F3.0
ISO AUTO
Description
The camera automatically adjusts
the sensitivity according to the
shooting scene.
EN
29
P
0.0
WB
AUTO
ISO
AUTO
SEQUENTIAL
Option
Description
j*1
*1
30
EN
For information on using the menus, see Using the Menu (p. 4).
IMAGE SIZE
COMPRESSION
Submenu 2
Application
14M (42883216)
8M (32642448)
5M (25601920)
3M (20481536)
2M (16001200)
1M (1280960)
VGA (640480)
16:9F (19201080)
FINE
NORMAL
Number of storable pictures (still images)/Continuous recording length (movies) in the internal
memory and SD/SDHC memory cards (p. 60)
Submenu 2
IMAGE SIZE
VGA (640480)/
QVGA (320240)
FRAME RATE
N 30fps*1/
O 15fps*1
*1
Application
Select the image quality based on the image size and frame rate.
Higher frame rates provide smoother movie images.
Number of storable pictures (still images)/Continuous recording length (movies) in the internal
memory and SD/SDHC memory cards (p. 60)
EN
31
Application
AUTO
OFF
ON
FACE/iESP*1
SPOT
AF TRACKING
*1
*2
32
EN
Application
Application
ESP
5 (spot)
For information on using the menus, see Using the Menu (p. 4).
Submenu 2
Application
OFF
ON
No sound is recorded.
ON
Application
OFF
Application
OFF
No sound is recorded.
ON
Sound is recorded.
Application
OFF
ON
EN
33
Application
OFF
ON
OFF
ON
Application
ON
Application
OFF
PROGRAM AUTO
Icon guide
4 14M
34
EN
For information on using the menus, see Using the Menu (p. 4).
Data must have been created with the PC software (ib) before using some function.
Refer to the PC software (ib) help guide for details on how to use the PC software (ib).
For details on installing the PC software (ib), see Battery charge and camera setup (p. 10).
BGM
TYPE
START
Submenu 2
Application
Single-frame advance/rewind:
During a slideshow, press I to skip ahead
one frame or press H to go back one frame.
2010/
02/26
Related items
35N
139E
EN
35
To start [EVENT q]
To start [COLLECTION q]
Press the A button, and then use FGHI
to select the desired collection. Press the
A button again to start playback of the
selected collection. Use HI to advance or
rewind by one frame.
To stop [COLLECTION q], press the
m button.
COLLECTION
BACK MENU
SET OK
EXIT MENU
PLAY OK
10/02/26 12:30
[PHOTO SURFING]
36
EN
[EVENT q]
Images can be played back by event created
with the PC software (ib).
For information on using the menus, see Using the Menu (p. 4).
BEAUTY FIX
Depending on the picture, the editing may
not be effective.
Submenu 1
Submenu 2
ALL
CLEAR SKIN
SOFT/AVG/
HARD
SPARKLE EYE
DRAMATIC
EYE
Application
[CLEAR SKIN],
[SPARKLE EYE] and
[DRAMATIC EYE] are
applied together.
Makes skin look
smooth and
translucent. Select the
correction effect from
3 levels.
Enhances the contrast
of the eyes.
Enlarges the subjects
eyes.
Submenu 2
C 640 480
E 320 240
Application
This saves a high-resolution image
as a separate image with a smaller
size for use in e-mail attachments
and other applications.
Cropping frame
SET OK
CLEAR SKIN
SOFT
AVG
HARD
BACK MENU
SET OK
EN
37
Application
SEPIA
HIGH
SATURATION
LOW
SATURATION
COLOR EDIT
SEPIA
SET OK
EDIT X CALENDAR
image.
CALENDAR
SET OK
38
EN
For information on using the menus, see Using the Menu (p. 4).
ERASE
Submenu 1
Application
ALL ERASE
SEL. IMAGE
ERASE/
Deletes the image displayed.
ERASE EVENT*1
CANCEL
*1
q (Playback menu) X 0
Protected images cannot be erased by
[ERASE] (p. 19, 39), [ERASE EVENT]
(p. 39), [SEL. IMAGE] (p. 39), or [ALL
ERASE] (p. 39), but all images are erased
by [MEMORY FORMAT]/[FORMAT] (p. 41).
R mark
OK
ERASE/CANCEL MENU
EN
39
Microphone
Recording starts.
The camera adds (records) sound for approx.
4 seconds while playing back the image.
40
EN
For information on using the menus, see Using the Menu (p. 4).
Application
AUTO
IN*1
*1
Application
YES*1
NO
Cancels formatting.
*1
Application
The language for the menus and
error messages displayed on the
monitor is selected.
EN
41
r (Settings 1) X RESET
Submenu 2
YES
NO
Application
When the camera is connected
to another device, the settings
selection screen is displayed.
AUTO
STORAGE
PC
System requirements
Windows
42
EN
Application
Application
YES
NO
Application
YES
NO
Application
OFF
ON
For information on using the menus, see Using the Menu (p. 4).
Submenu 3
SILENT MODE*1, 2
Submenu 4
OFF/ON
BEEP
SHUTTER SOUND
Application
Select [ON] to disable camera sounds
(operation sounds, shutter sound, and
warning sounds) and mute sound during
playback.
SOUND TYPE
1/2/3
VOLUME
SOUND TYPE
1/2/3
VOLUME
q VOLUME
*1
*2
Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback.
Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television.
Folder name
100OLYMP
999OLYMP
Submenu 2
RESET
AUTO
File name
Pmdd0001.jpg
Pmdd9999.jpg
*1
Automatic
numbering
Pmdd
Application
This resets the sequential number
for the folder name and file name
whenever a new card is inserted.*1
This is useful when grouping
images on separate cards.
Automatic
numbering
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
EN
43
M D
CANCEL MENU
EN
TIME
Y/M/D
Date order
44
t (Settings 3) X X
2010 . 02 . 26 12 : 30
BACK MENU
SET OK
SET OK
For information on using the menus, see Using the Menu (p. 4).
Submenu 3
Application
The time in the home time zone (the time zone selected for x in
submenu 2).
The time in the travel destination time zone (the time zone selected
for y in submenu 2).
HOME/ALTERNATE
x*1
y*1, 2
*1
*2
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on.
When you select a time zone, the camera automatically calculates the time difference between the selected
zone and the home time zone (x) to display the time in the travel destination time zone (y).
Application
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.
Connecting the camera to a TV in European countries, China, and so on.
The factory default settings differ according to the region where the camera is sold.
AV cable (supplied)
Connect to the TV
video input jack (yellow)
and audio input jack
(white).
EN
45
Application
OFF
ON
46
EN
Printing
Direct printing (PictBridge*1)
By connecting the camera to a PictBridgecompatible printer, you can print images directly
without using a computer.
To find out if your printer supports PictBridge,
refer to the printers instruction manual.
*1
EASYPRINT START
CUSTOM PRINT OK
3
4
EXIT
PRINT OK
EN
47
1
2
3
Submenu 4
OFF/ON*1
(The number of
images per sheet
varies depending
on the printer.)
*1
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
PRINT ORDER
EXIT MENU
Submenu 2
SET OK
ALL PRINT
MULTI PRINT
ALL INDEX
PRINT ORDER*1
BORDERLESS
STANDARD
STANDARD
BACK MENU
48
EN
4/30
Application
Application
The image is printed with a border
around it ([OFF]).
The image is printed to fill the
entire paper ([ON]).
*1
SET OK
NORM 14M
100 0004
10/02/26 12:30
FILE
PRINT OK
MORE
SINGLE PRINT
6
7
1
WITHOUT
WITHOUT
SET OK
Submenu
5
Submenu
6
Application
<
0 to 10
DATE
WITH/
WITHOUT
FILE NAME
WITH/
WITHOUT
(Proceeds
to the
setting
screen.)
PRINT
CANCEL
BACK MENU
SET OK
Printing starts.
When [OPTION SET] is selected in [ALL PRINT]
mode, [PRINT INFO] screen is displayed.
SET OK
Cropping frame
To cancel printing
SET OK
OK
CANCEL
BACK MENU
SET OK
CANCEL MENU
CONTINUE
CANCEL
SET OK
EN
49
4/30
NORM 14M
100 0004
10/02/26 12:30
FILE
SET OK
NO
DATE
TIME
BACK MENU
Submenu 2
Single-frame print
reservations [<]
SET OK
Application
NO
DATE
TIME
PRINT ORDER
1 ( 1)
SET
CANCEL
PRINT ORDER
BACK MENU
<
U
EXIT MENU
50
EN
6
SET OK
SET OK
1
2
3
1
2
3
5
6
RESET
KEEP
BACK MENU
EN
51
Usage Tips
If the camera does not work as intended, or if
an error message is displayed on the screen,
and you are unsure of what to do, refer to the
information below to fix the problem(s).
Troubleshooting
Battery
The camera does not work even when
batteries are installed.
Card/Internal memory
An error message is displayed.
Error message (p. 53)
Shutter button
No picture is taken when the shutter
button is pressed.
52
EN
Monitor
Difficult to see.
Miscellaneous
The camera makes a noise when taking
pictures.
Error message
Error message
NO INK
Corrective action
JAMMED
CARD ERROR
WRITE
PROTECT
Card problem
Insert a new card.
Card problem
The card write-protect switch is
set to the LOCK side. Release
the switch.
MEMORY FULL
CARD FULL
Card problem
Replace the card.
Erase unwanted images.*1
CARD SETUP
POWER OFF
FORMAT
SET OK
MEMORY SETUP
POWER OFF
MEMORY FORMAT
SET OK
NO PICTURE
PICTURE
ERROR
THE IMAGE
CANNOT
BE EDITED
BATTERY
EMPTY
NO
CONNECTION
NO PAPER
SETTINGS
CHANGED*3
Card problem
Use FG to select [FORMAT],
and press the A button. Next,
use FG to select [YES], and
press the A button.*2
Internal memory problem
Use FG to select [MEMORY
FORMAT], and press the
A button. Next, use FG to
select [YES], and press the
A button.*2
PRINT ERROR
CANNOT PRINT*4
*1
*2
*3
*4
Corrective action
Printer problem
Refill the ink in the printer.
Printer problem
Remove the jammed paper.
Printer problem
Return to the status where the
printer can be used.
Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.
Problem with selected image
Use a computer to print.
Battery problem
Charge the battery.
Connection problem
Connect the camera and
computer or printer correctly.
Printer problem
Load paper into the printer.
EN
53
Shooting tips
When you are unsure of how to take a picture
that you envision, refer to the information below.
Fast-moving object
Focusing
Focusing on the subject
of the screen
After focusing on an object at the same distance
as the subject, compose the shot, and take the
picture.
Pressing the shutter button halfway (p. 15)
Camera shake
Taking pictures without camera shake
(p. 32)
(p. 34)
*1
*1
54
EN
Exposure (brightness)
Taking pictures with the right
brightness
Color hue
Image quality
Taking sharper pictures
Panorama
Taking pictures so that the frames are
stitched smoothly
Batteries
Making batteries last longer
EN
55
Playback/Editing tips
Playback
Playing images in the internal memory
and card
Editing
Erasing the sound recorded to a still
image
56
EN
Appendix
Camera care
Exterior
Wipe gently with a soft cloth. If the camera is
very dirty, soak the cloth in mild soapy water
and wring well. Wipe the camera with the
damp cloth and then dry it with a dry cloth. If
you have used the camera at the beach, use a
cloth soaked in clean water and wrung well.
Monitor
Wipe gently with a soft cloth.
Lens
Blow dust off the lens with a commercial
blower, then wipe gently with a lens cleaner.
Battery/USB-AC adapter
Wipe gently with a soft, dry cloth.
Do not use strong solvents such as benzene
or alcohol, or chemically treated cloth.
Mold may form on the lens surface if the
lens is left dirty.
Storage
When storing the camera for extended
periods, remove the battery, AC adapter and
card, and keep in a cool, dry place that is well
ventilated.
Periodically insert the battery and test the
camera functions.
Avoid leaving the camera in places where
chemical products are handled since this
may result in corrosion.
EN
57
58
EN
LOCK
0.0
WB
AUTO
ISO
AUTO
Current memory
indicator
4 14M
Flashes in red
0.0
WB
AUTO
ISO
AUTO
4 14M
4/30
Shooting mode
10/02/26 12:30
Playback mode
EN
59
Still pictures
IMAGE SIZE
6 42883216
4 32642448
n 25601920
3 20481536
2 16001200
1 1280960
7 640480
0 19201080
COMPRESSION
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
Movies
IMAGE SIZE
8 640480
9 320240
FRAME RATE
N
O
N
O
The maximum file size of a single movie is 2 GB, regardless of the capacity of the card.
60
EN
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS
SERVICE PERSONNEL.
DANGER
WARNING
CAUTION
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO
WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
General Precautions
Read All Instructions Before you use the
product, read all operating instructions. Save all
manuals and documentation for future reference.
Cleaning Always unplug this product from the
wall outlet before cleaning. Use only a damp
cloth for cleaning. Never use any type of liquid or
aerosol cleaner, or any type of organic solvent to
clean this product.
Attachments For your safety, and to avoid
damaging the product, use only accessories
recommended by Olympus.
Water and Moisture For precautions on
products with weatherproof designs, read the
weatherproofing sections.
Location To avoid damage to the product, mount
the product securely on a stable tripod, stand,
or bracket.
Power Source Connect this product only to the
power source described on the product label.
Lightning If a lightning storm occurs while using
an AC adapter, remove it from the wall outlet
immediately.
Foreign Objects To avoid personal injury, never
insert a metal object into the product.
Heat Never use or store this product near any
heat source such as a radiator, heat register,
stove, or any type of equipment or appliance that
generates heat, including stereo amplifiers.
CAUTION
Stop using the camera immediately if you
notice any unusual odors, noise, or smoke
around it.
Never remove the batteries with bare hands,
which may cause a fire or burn your hands.
Never hold or operate the camera with wet
hands.
Do not leave the camera in places where it may
be subject to extremely high temperatures.
Doing so may cause parts to deteriorate and, in
some circumstances, cause the camera to catch
fire. Do not use the charger or AC adapter if it is
covered (such as a blanket). This could cause
overheating, resulting in fire.
EN
61
DANGER
The camera uses a lithium ion battery specified
by Olympus. Charge the battery with the specified
AC adapter or charger. Do not use any other AC
adapters or chargers.
Never heat or incinerate batteries.
Take precautions when carrying or storing
batteries to prevent them from coming into contact
with any metal objects such as jewelry, pins,
fasteners, etc.
Never store batteries where they will be
exposed to direct sunlight, or subjected to high
temperatures in a hot vehicle, near a heat source,
etc.
To prevent causing battery leaks or damaging their
terminals, carefully follow all instructions regarding
the use of batteries. Never attempt to disassemble
a battery or modify it in any way, solder, etc.
If battery fluid gets into your eyes, flush your eyes
immediately with clear, cold running water and
seek medical attention immediately.
Always store batteries out of the reach of small
children. If a child accidentally swallows a battery,
seek medical attention immediately.
WARNING
Keep batteries dry at all times.
To prevent batteries from leaking, overheating,
or causing a fire or explosion, use only batteries
recommended for use with this product.
Insert the battery carefully as described in the
operating instructions.
If rechargeable batteries have not been recharged
within the specified time, stop charging them and
do not use them.
62
EN
CAUTION
Before loading, always inspect the battery carefully
for leaks, discoloration, warping, or any other
abnormality.
The battery may become hot during prolonged
use. To avoid minor burns, do not remove it
immediately after using the camera.
Always unload the battery from the camera before
storing the camera for a long period.
LCD Monitor
Do not push the monitor forcibly; otherwise the
image may become vague, resulting in a playback
mode failure or damage to the monitor.
A strip of light may appear on the top/bottom of the
monitor, but this is not a malfunction.
When a subject is viewed diagonally in the
camera, the edges may appear zigzagged on the
monitor. This is not a malfunction; it will be less
noticeable in playback mode.
In places subject to low temperatures, the LCD
monitor may take a long time to turn on or its
color may change temporarily. When using the
camera in extremely cold places, it is a good idea
to occasionally place it in a warm place. An LCD
monitor exhibiting poor performance due to low
temperatures will recover in normal temperatures.
The LCD used for the monitor is made with
high-precision technology. However, black spots
or bright spots of light may appear constantly on
the LCD Monitor. Due to its characteristics or the
angle at which you are viewing the monitor, the
spot may not be uniform in color and brightness.
This is not a malfunction.
Disclaimer of Warranty
Olympus makes no representations or warranties,
either expressed or implied, by or concerning any
content of these written materials or software, and
in no event shall be liable for any implied warranty
of merchantability or fitness for any particular
purpose or for any consequential, incidental or
indirect damages (including but not limited to
damages for loss of business profits, business
interruption and loss of business information)
arising from the use or inability to use these
written materials or software or equipment. Some
countries do not allow the exclusion or limitation
of liability for consequential or incidental damages
or of the implied warranty, so the above limitations
may not apply to you.
Olympus reserves all rights to this manual.
Warning
Unauthorized photographing or use of
copyrighted material may violate applicable
copyright laws. Olympus assumes no
responsibility for unauthorized photographing,
use or other acts that infringe upon the rights of
copyright owners.
Copyright Notice
All rights reserved. No part of these written
materials or this software may be reproduced
or used in any form or by any means, electronic
or mechanical, including photocopying and
recording or the use of any type of information
storage and retrieval system, without the prior
written permission of Olympus. No liability
is assumed with respect to the use of the
information contained in these written materials
or software, or for damages resulting from
the use of the information contained therein.
Olympus reserves the right to alter the features
and contents of this publication or software
without obligation or advance notice.
EN
63
FCC Notice
Radio and Television Interference
Changes or modifications not expressly approved
by the manufacturer may void the users authority
to operate this equipment. This equipment has
been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Adjust or relocate the receiving antenna.
Increase the distance between the camera and
receiver.
Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
Consult your dealer or an experienced radio/TV
technician for help. Only the OLYMPUS-supplied
USB cable should be used to connect the
camera to USB enabled personal computers
(PC).
64
EN
A Type
B Type
(American Type) (British Type)
BF Type
(British Type)
B3 Type
(British Type)
C Type
(CEE Type)
SE Type
(CEE Type)
O Type
(Oceania Type)
The representative supply voltage and plug type are described in this chart.
Depending on the area, different types of plugs and supply voltages are used.
Attention: Power cord meeting demands from each country shall be used.
- For only the United States
Use a UL Listed, 1.5 - 4.5 m (5 - 15 ft), Type SPT-2 or NISPT-2, AWG no. 18 power supply cord, rated for
125 V 7 A, with a non-polarized NEMA 1-15P plug rated for 125 V 15 A.
Europe
Countries/Regions
Austria
Belgium
Czech
Denmark
Finland
France
Germany
Greece
Hungary
Iceland
Ireland
Italy
Luxemburg
Netherlands
Norway
Poland
Portugal
Romania
Russia
Slovak
Spain
Sweden
Switzerland
UK
Voltage
230
230
220
230
230
230
230
220
220
230
230
220
230
230
230
220
230
220
220
220
127/230
230
230
240
Asia
Countries/Regions
China
Hong Kong
India
Indonesia
Japan
Korea (rep)
Malaysia
Philippines
Singapore
Taiwan
Thailand
Vietnam
Voltage
220
200/220
230/240
127/230
100
220
240
220/230
230
110
220
220
Oceania
Countries/Regions
Australia
New Zealand
Voltage
240
230/240
North America
Countries/Regions
Canada
USA
Voltage
120
120
Central America
Countries/Regions
Bahamas
Costa Rica
Cuba
Dominican (rep)
El Salvador
Guatemala
Honduras
Jamaica
Mexico
Nicaragua
Panama
Voltage
120/240
110
110/220
110
110
120
110
110
120/127
120/240
110/220
South America
Countries/Regions
Argentina
Brazil
Chile
Colombia
Peru
Venezuela
Voltage
220
127/220
220
120
220
120
Middle East
Countries/Regions
Iran
Iraq
Israel
Saudi Arabia
Turkey
UAE
Voltage
220
220
230
127/220
220
240
Africa
Countries/Regions
Algeria
Congo (dem)
Egypt
Ethiopia
Kenya
Nigeria
South Africa
Tanzania
Tunisia
Voltage
127/220
220
220
220
240
230
220/230
230
220
EN
65
Telephone Number
: 3500 Corporate
Parkway, P.O. Box
610, Center Valley, PA
18034-0610, U.S.A.
: 484-896-5000
66
EN
EN
67
Provisions of warranty
1 If this product proves to be defective, although it
has been used properly (in accordance with the
written Handling Care and Operating instructions
supplied with it), during the applicable national
warranty period and has been purchased from
an authorized Olympus distributor within the
business area of Olympus Europa Holding GmbH
as stipulated on the website: http://www.olympus.
com this product will be repaired, or at Olympuss
option replaced, free of charge. To claim under
this warranty the customer must take the product
before the end of the applicable national warranty
period to the dealer where the product was
purchased or any other Olympus service station
within the business area of Olympus Europa
Holding GmbH as stipulated on the website:
http://www.olympus.com. During the one year
period of the World Wide Guarantee the customer
may turn the product in at any Olympus service
station. Please notice that not in all countries
such Olympus service station exists.
2 The customer shall transport the product to the
dealer or Olympus authorized service station
at his own risk and shall be responsible for any
costs incurred in transporting the product.
Provisions of Guarantee
1 OLYMPUS IMAGING CORP., Shinjuku
Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku,
Tokyo 163-0914, Japan grants a one year World
Wide Guarantee. This worldwide Guarantee
must be presented at an Olympus authorized
repair service station before any repair can
be made under conditions of this Guarantee.
This Guarantee is valid only if the Guarantee
Certificate and proof of purchase are presented
at the Olympus repair service station. Please note
that this Guarantee is in addition to and does not
68
EN
Notes;
1 This Warranty is in addition to and does not affect
the customers statutory right.
2 lf you have any queries regarding this Warranty,
call any of the Olympus authorized service
stations listed in the instructions.
EN
69
Disclaimer of Warranty
Olympus makes no representations or
warranties, either expressed or implied, by or
concerning any content if these written materials
or software, and in no event shall be liable
for any implied warranty of merchantability or
fitness for any particular purpose or for any
consequential, incidental or indirect damages
(including but not limited to damages for loss
of business profits, business interruption and
loss of business information) arising from the
use of inability to use these written materials or
software. Some states do not allow the exclusion
or limitation of liability for consequential or
incidental damages, so the above limitations
may not apply to you.
Trademarks
IBM is a registered trademark of International
Business Machines Corporation.
Microsoft and Windows are registered trademarks
of Microsoft Corporation.
Macintosh is a trademark of Apple Inc.
The SDHC logo is a trademark.
All other company and product names are
registered trademarks and/or trademarks of their
respective owners.
The standards for camera file systems referred to
in this manual are the Design rule for Camera File
system/DCF standards stipulated by the Japan
Electronics and Information Technology Industries
Association (JEITA).
70
EN
SPECIFICATIONS
Camera
Product type
Recording system
Still pictures
: Digital recording, JPEG (in accordance with Design rule for Camera File
system (DCF))
Applicable standards : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge
Sound with still
pictures
: Wave format
Movie
Memory
: Internal memory
SD memory card
SDHC memory card
: 14,000,000 pixels
Lens
Photometric system
Shutter speed
: 4 to 1/2000 sec.
Shooting range
Monitor
Connector
Automatic calendar
system
: 2000 up to 2099
Operating environment
Temperature
Humidity
: 30 % to 90 % (operation)/10 % to 90 % (storage)
Power supply
Dimensions
Weight
EN
71
Standard voltage
: DC 3.7 V
Standard capacity
: 740 mAh
Battery life
Operating environment
Temperature
Dimensions
: 31.5 mm (W) 39.5 mm (H) 6.0 mm (D) (1.2 1.5 0.2 in.)
Weight
: F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B
Power requirements
Output
: DC 5 V, 500 mA
Operating environment
Temperature
Dimensions
: 50.0 mm (W) 54.0 mm (H) 22.0 mm (D) (2.0 2.1 0.9 in.)
Weight
72
EN
VN684801