Beruflich Dokumente
Kultur Dokumente
Welcome to my
Posterous Web Site
2
I was 72 years old when this picture was taken. My life as amateur telescope
maker had come to an end, and my life as a retired person had started five years
before. The 10 “ telescope (picture) in the middle has got it’s permanent place in
my cottage 40 km away on Norways south
coast. Here we can meet a spectacular
sight of myriades of stars on a clear,
nightly sky in august and september. In
the city Skien where i live , the Milky Way
is a seldom sight, due to the disturbance
from all light and pollutions from
environment. For me is astronomy still
mighty and facinating, and marvellous
pictures from space , thanks to the Hubble
telescope, still keeps my curiosity and
pleasure alive.
1. My private life
7. Antigravity in my basement
8. Grandfathers experiment
3
My private life
I lost my dear Elin in august 1998. I am 83 years old, living alone in my own
house, together with a beatiful cat . My son Kjell Erik and his wife Ingvil has
settled in Molde, a city about 600 km north of Skien. They have both their
physiotherapy education, partly working in their trade, partly in school-and
health department in Molde.
My three grandchildren Silje(28) Åsa (25) and Erlend (23 ) are still going
through their respective studies at NTNU (Norwegian Technical Nature-
scientific University, NTNU) in the city Trondheim.
We keep in good contact with e-mails and phone calls, and I get visits
from them as often their jobs and studies allow. Their vacations in
summer time is often used to visit our woderful cottage , laying only 100
meters from the seaside, with a magnific view out on the ocean. And it’s
only 40 minutes car driving from my home. Take a look :
4
For me this involved a lot of pilot plant investigations, including not only
the chinese magnesite, but a lot of other imaginable qualities from other
places, all around the world.
8
The place for the plant became Becancour, close to the St.Lawrence river.
Due to several unlycky circumstances, such as a duty protection fra USA,
a serious budget overrun occured. Nevertheless, the plant was startet
and produced magnesium metal as anticipated.
Next machine was possibly the turning lathe for metals , giving later a lot
more of applacability when a frequency convertor was installed for precise
control of rotation speed.
I love her !
needed, and from their Mike Bates I got a kindly e-mail , telling me about
the complicated procedures for producing relieable GM-tubes. I
immediately ordered two GM-tubes ( ZP 1210), for a total price of No kr.
2629,-.(about £ 260,-)
Later on, the interest for radio showed up, but without high tensions, and
not practicing as an radio amateur with home built transmitter.
High tensions showed up again when I on Internet in 1997 found quite a
lot about building “Plasma Globes” by using a “flyback transformer” from a
scrapped TV , those who build up the lines on the screen.
Fare more fascinating however was what “tesal-saved nerdes” could tell
and show about their big and sofisticated
tesla generators, produsing high frequent,
with sparks in the hundred-thousand volts
class. People like Kronjaeger, Jochen and
Stefan-Kluge cuntributed with the most of it,
and had a countless suggestions on how to
calculate, build and optimize their tesla
generators. Warnings and cautions for fatal
14
acccidents was often mentioned. Many people believe that due to the high
frequenc the current would only pass the skin of a human beeing, not
giving any harm. The truth is not so. The high frequence produced by
home made tesla generators will always have a low frequent component
due to the use of a so called OBIT-transformer
common bottles (redwine bottles, 700 ml are very fine) with a sodium
chloride solution, putting in a steel rod in the solution and seal the outlet,
and gluing aluminium foil to the outer side of the bottle.
The capacity for such a condenser will be about 0.8 nF. In my case I
coupled 5 bottles in parallell, and measured the total capacity to be 4.2
nF. Prim is primary coil in the diagram.
A calculation of self inductance for the coils I used will be given here :
f = 103 / 2π sqr ( 55.4 x 4200) = 1000 / 6.28 x 464.6 = 0.343 ): 330 KHz
The vertical coil is the secondary in this system. Its self induction iwas
calculated as shown here :
L = h x n2 / 100 ( 10.0 + 0.43) = 7.6 x 9502 / 100 x 10.43 = 6576 μH eller 6.58 mH.
In practice only half of the vindings surface is estimate as capacity-giving. The area of a
sphere with the area (5695/2=) 2847 cm2 has a radius of r= sqr ( 2847/ 4π =) 15 cm.
Converted to capacity this will be (15/0.9=) 16.7 pF
Total outher surface was 3234 cm2, which is eqivvalent to a sphere with a radius :
sqr(3234/ 4π =) 16 cm. Converted to capacity this is (16/ 0.9=) 17.8 pF.
f = 103 / 2π sqr ( 6576 x 35.4 ) = 1000 / 6.28 x 482.5 = 0.330 ): 330 KHz
So far was my calculated resonans frequency for prim. and sec. circuits
exactly the same, giving high hopes for optimal results.
Well, I albeit met some trouble. The spark lengt was only 5-6 cm, corresponding
to 50-60 000 volts. I felt there was room for higher potensials, and planned a
more serious investigation. With good advices and support from my good friend
Ottar, the following equipment was acquired :
has a sharp, hissing sound, and the smoke detector is affected, making
additional noise in my basement.
Perhaps it could be funny to enlarge to higher tensions and getting more “show”
out of it, but my basement headrom is only 210 cm. No place for such
adventures for me.
Tesla-nerds in USA use big garages and halls to try out their large vonders, and
find it very amusing taking pictures beeing in the midst of their impressive
sparks . But such pictures are of course double-exposured !
Take a look at the diagram given, the Stirling motor principle is quite
simple ,isn’ it ?
-
-
Antigravity in my basement
“When trying to affect the spinning, the axis of a gyroscope will make a
movement perpendicular to the moment , trying to get it’s own spinning
axis parallell to the moment “ This cleared up everything, didn’t it ?
Give me two such wheels, one for each arm, and let me turn around my
own axis, both arms outstanding. Either I will feeel a lift of my body, or
feel my body beeing pressed down, dependent on the way of rotation.
Standing on a short, motor rotated bench with a steady foothold, and
correct turning direction for wheels and myself, I should feel a lifting force
upon my body ! And what if I let a rack take over my place, and put in
three motors for wheels and rack rotation ?
Could such a system rise from the floor ? Yes. it had to, no question !
This impossible trick, lifting oneself up in the hair was within rich, and the
physical laws for gravity had to be justified. The feeling of this possibility
gave me a feeling of both delight and freight. What to do next ?
Shortly after i read in New Scientist 20. oct. 1990 under the section
Review, with the title : Gyroscopes remain the strangest of attractors, and
a newly published book Beyond 2001, The
law of physics revolutionized,
written by an englishman, Sandy Kidd.
immediately ordered this book, waiting
impatient for the book to come. With
shivering hands i opened it and started
reading.
Kidd describes how he got his idea, building
a machine to develop gravity forces, able to
lift itself up in the air. His book had no
drawings or pictures of his invention. The
only thing to observe was on the cover of
this book, shown here.
Kidds efforts for getting help for explanation and further development is
well described in his book, but no person, even highly qualified in physics
could give him any satisfactory explanation of his adventure.
I startet the wheels, got them spinning with moderate shaking. Lifting
forces were still lying in wait. So motor C was gently started, continiously
viewing my bathroom scales. The machinery began shaking, and the
reading on scales became more and more blurred. The vertical axis
speed increased, and gradually I felt that a formidable crasch might occur
at any moment. The scales was impossible to read off, due to the
vibrations. Of cours I colud let the whole ting go on to the bitter end, and
experienced a horrible and complete crash, but instead I resignated and
stopped the show.
Later on I have done some philosophy around these events. For the first:
Kidd wrote about it : “ the device gave a final, excrutiating howl and
glided upwards until it howered three inches above the worktop”
He writed later the following : “perhaps it had someting with harmonic
resonans in the system to do “.
My own philosophy : Only a spinning giro can show us the right way to
go, regardless to its surroundings. . They never mistakes in their strange
co-operation with the inner structure of the universe, because their forces
are part of it.
Kjell W. Tveten
24