Beruflich Dokumente
Kultur Dokumente
A very intuitive and easy to use software. Allows you to quickly enter the data of the heat exchanger that
should be tested and to generate a print report very detailed. It is very customizable relatively to the calculation of geometric data, models of fins and tubes, materials and manifolds. It gives you the possibility to
save and load calculations in individual projects.
Allows you to select the fins and the condenser
tubes from a wide selection of types which can be
updated by the user, to analyze, in addition to the
condensing, even cases of overheating of the inlet
gas and the output subcooling liquid.
UNILAB MICROCHANNEL gives the possibility to
define the number of passes (up to a maximum of
10) and for each of these, the tube distribution so
as to improve the heat transfer coefficient.
Currently, UNILAB MICROCHANNEL, like all software UNILAB, using a wide variety of fluids: it contains a list of more than 300 gases and refrigerants
from the REFPROP NIST (National Institute of
Standards and Technology).
FUNCTIONALITIES
Calculation
modalities
Archive
management
Geometries
In verify
Available in n 3 different calculation modalities:
- Condensation. Analysis of the phases distribution: desuperheating, condensing and subcooling
- Gas-cooler
- Liquid-cooler
Archive of materials, microchannels, fins, manifolds and geometries
Possibility to set, edit and erase the customers data, materials and fluids
Management of the geometrys data (microchannels and fins) and it is possible to add new ones
Corrugated fin type: plain triangular, plain rectangular, offset trip, multilouvered, wavy triangular, wavy
rectangular
Management of the materials data and it is possible to add new ones, specifying and inserting the following information: Thermal Conductivity (W/m*K) and Density (kg/m3)
Materials
Fluids
Printouts
Customization
Drawings
CAD 3D
Graphs
Correction
factors
Logo
Unit of
measurement
Projects
archive
Languages
Technical
support
Activation
modality
Digital download - an internet connection is required for both installation and activation. Further accesses to the internet connection may be required while using the software
Automatic renewal of maintenance contract and it covers a maximum of no. 3 technical licenses
System
requirements
bit.ly/unilabdemo
bit.ly/unilabyoutube
Follow us on:
bit.ly/unilablinkdin