Beruflich Dokumente
Kultur Dokumente
MODEL 64348CF46H
Nozzle with dust cap, 100-mesh screen, 45-psi
HECV, bicycle handle grips &
quick disconnect with 2 NPT inlet
Connects to 3-lug
aircraft adapter.
international
standard
671 W. 17th St., Costa Mesa, CA 92627 (949) 764-2200 Fax (949) 631-2673
Email groundfueling@argo-tech.com www.argo-tech.com ISO9001 Certified
ORDERING DATA
The part number for a complete nozzle consists of four parts as illustrated below.
PART TWO
The following option(s) may be added to part two of the part number to obtain the desired unit configuration.
OPTION
LETTER
*A
*B
*C
D
E
**F1
**F3
**F4
**F5
**F6
G
DESCRIPTION
OPTION
LETTER
DESCRIPTION
Q
Adds Fuel Sample QD (GTP-235-3/8)
***R
Adds Flight Refueling Adapter (41600)
T
Adds Adapter to mate with Whittaker
accessories (44694)
U
Replaces Standard Handle with Circular
Handle (44807-2)
*
Options A, B & C only available when a
male half from Part 3 or Option R is
specified.
**
To obtain a nozzle with a dual HECV setup
specify two options in series, F5F4 results
in 55- and 45-psi units with the former
assembled nearest the nozzle inlet. If two
HECVs are desired specify the highest
pressure setting first.
***
Option R only available with 47013
HECV (F3, F4, or F5)
PART THREE
The configuration of the inlet is defined by adding the appropriate number (s) or letter (s) from the table below to Part 3 in
conjunction with the appropriate option letter from Part 4 below. The nozzle may terminate in an adapter half only. In this
case leave Part 4 blank. To obtain a female half, quick disconnect or dry break, or to complete the specification of the
ball valve outlet, Part 4 must be completed.
OPTION
LETTER DESCRIPTION
*1
*2
OPTION
LETTER
6
7
D
E
J
R
DESCRIPTION
PART FOUR
The following option(s) may be added to part four of the part number to obtain the desired unit configuration.
OPTION
LETTER
H
K
*L
OPTION
LETTER
DESCRIPTION
*M
P
*
DESCRIPTION
EXAMPLES:
64348CD6H - Nozzle with 100-mesh screen, bonding cable and standard quick disconnect with 2 NPT inlet
thread.
64348BF41 - Nozzle with 60-mesh screen, 45-psi HECV with inlet flange to mate 60427 type accessories. (Note
that no inlet QD or other configuration is specified in this case).
64348F514P - Nozzle with 55-psi HECV with flanged adapter half and 61154 Dry Break with 2 NPT inlet. (Note
swivel adapter half can be specified by using 64348F524P).
The curves presented below are typical for the inlet pressures and flow rates shown in a system with appropriate back
pressure.
50
40
45-PSI REGULATOR
35-PSI REGULATOR
1
30
40
3
20
100
300
200
400
FLOW RATE - US GPM
500
600
30
100
300
200
400
FLOW RATE - US GPM
500
600
60
55-PSI REGULATOR
1
50
3
40
100
300
400
200
FLOW RATE - US GPM
500
600
ENVELOPE DIMENSION
OPTIONS
DIMENSION A
3H, K-N, P
14.51
6H, K-N, P
9.46
7H,carter
K-N, P ground fueling
11.72
9.00
A Division
of J.C. Carter Co. Inc.
9H,
K-N,
P
9.59
11.25
J
8.20
F*3H,
K-N,
P
18.06
A
F*26H, K-N, P, F*6H, K-N, P
14.65
F*17H, K-N, P, F*7H, K-N, P
16.41
FBO OPERATIONS
F*F*3H, K-N, P
2.71
MODELS 64049
F*F*26H, K-N, P, F*6H, K-N, P
19,84
Along with
this underwing
nozzle, Carter
Carter now offers an underwing nozzle designed for small
F*F*29K,
N, P, F*F*9K,
N, P, also offers an19.9
interchange fitting to effect easy underwing to overwing or
airfield, FBO, use with a new easy to use quick disconnect
F*F*29L, M, F*F*9L, M
20.49
Closed Circuit Refueling (CCR) Nozzle interchange with a
for strainer checking, with or without an effective dry
*
3,
4
OR
5
HECV
minimum of fuel spillage.
break. The underwing nozzle, a derivation of the 64348,
UNDERWING NOZZLES
12.80
9/99
BACK
SPECIAL TOOLS
The following special tools are recommended for the maintenance of the 64348 Nozzle:
ILLUSTRATED OPTIONS