Beruflich Dokumente
Kultur Dokumente
com
PHYSICS
9646/01, 9745/01
24 September 2010
1 hour 15 minutes
www.erwintuition.com
www.erwintuition.com
Data
speed of light in free space,
4 x 10-7 H m-1
elementary charge,
1.60 x 10-19 C
6.63 x 10-34 J s
1.66 x 10-27 kg
me
9.11 x 10-31 kg
mp
1.67 x 10-27 kg
NA
gravitational constant,
9.81 m s-2
www.erwintuition.com
www.erwintuition.com
Formulae
uniformly accelerated motion,
ut + at2
v2
u2 + 2as
pV
gh
Gm
r
xo sin t
vo cos t
R1 + R2 +
1/R
1/R1 + 1/R2 +
electric potential,
Q / 4or
alternating current/voltage,
xo sin t
transmission coefficient,
exp(-2kd)
where k
resistors in series,
resistors in parallel,
radioactive decay,
decay constant
(x
2
o
x2
8 2 m ( U E )
h2
xo exp (-t)
0.693
t1
2
www.erwintuition.com
www.erwintuition.com
A student measures the dimensions of a cylindrical metal rod with an uncertainty of 2 %. Its
diameter is 14.8 mm and its length is 40.2 mm. The metal rod has a resistivity of
1.5 10 8 m.
The percentage uncertainty in the value of the resistance of the rod is
4%
6%
8%
A ball is projected horizontally from the top of a cliff with a speed of 40 m s-1. Assuming that
there is no air resistance, what is its speed 3.0 s later? Take g as 10 m s2.
2%
30 m s1
40 m s1
50 m s1
60 m s1
A linear accelerator sends a charged particle along the axis of a set of coaxial hollow metal
cylinders as shown in the diagram.
track of particle
metal cylinders
The particle travels at constant speed inside each cylinder. The particle crosses the gap
between the cylinders at equal time intervals, and at each gap its kinetic energy increases
by a fixed amount. Which of the graphs best represents the way in which v, the velocity of
the particle varies with d, the distance along its track?
v
www.erwintuition.com
www.erwintuition.com
A bore hole contains both oil and water as shown. The depth of the water is 730 m. The
pressure difference between the top and the bottom of the bore hole is 17.5 MPa. The
density of the oil is 830 kg m-3 and the density of the water is 1000 kg m-3.
730 m
907 m
1000 m
1090 m
1270 m
The figure below shows a massive column held stationary in position by a group of people
pulling at a rope.
40
The 4.0 m high column has a mass of 180 kg and its centre of gravity X is at a distance of
2.3 m from the base. The rope makes an angle of 35 to the column and the column itself
makes an angle of 40 to the horizontal. The tension T in the rope is
8.76 102 N
9.50 102 N
1.14 103 N
1.36 103 N
Two blocks, X and Y, of masses m and 2m respectively, are accelerated along a smooth
horizontal surface by a force F as shown in the diagram below.
What is the magnitude of the force exerted by block Y on block X during the acceleration?
F
6
F
3
2F
3
www.erwintuition.com
5F
6
www.erwintuition.com
A beaker of fluid resting on a weighing scale gives a reading X. A solid object suspended
from a Newton-metre indicates a reading Y when in air.
Newton-metre
beaker of fluid
weighing scale
The solid object is then fully immersed in the beaker of fluid. If the Newton-metre now
indicates a reading Z, what is the new weighing scale reading?
X+Z
X+Y-Z
X+Y
X+Z-Y
A small steel sphere is held just below the surface of a deep tank of water and released.
Which one of the following best illustrates the relationship between the acceleration a and the
displacement z of the sphere? (Take g = 10 m s-2 and you may neglect upthrust.)
a / m s-2
a / m s-2
10
10
D
a / m s-2
a / m s-2
10
10
www.erwintuition.com
www.erwintuition.com
10
An object of mass 1.5 kg is sliding with a velocity of 3.0 m s-1 on a frictionless surface
towards another object which is stationary and has a mass of 2.0 kg. This head-on collision is
completely inelastic.
If the duration of the collision is 0.050 s, the average force that is exerted between the objects
during the collision is
A
11
39 N
51 N
90 N
119 N
building
v (Susan)
Susan throws a stone vertically downwards and, at the same time, Peter throws a
stone upwards at an angle of 30 to the horizontal. The speed v with which both stones
are thrown is the same.
Neglecting air resistance, which one of the following statements is true?
A
B
C
D
12
The stone thrown by Susan will hit the ground with a greater speed than the stone
thrown by Peter.
Both stones will hit the sea with the same speed no matter what the height of the
building.
In order to determine which stone will hit the ground with a greater speed, the height of
the building must be known.
In order to determine which stone hits the ground first, the height of the building
must be known.
The graph shows the variation with time of the velocity of a body when it is acted on by a
force.
v / m s-1
10
t/s
10
If mass of the body is 2.0 kg, the work done by the force on the body is
64 J
16 J
64 J
www.erwintuition.com
80 J
www.erwintuition.com
13
A bird is flying in a horizontal circular path at constant speed. Its wings are inclined at an
angle to the horizontal as shown in the diagram below.
centre of circle
What of the following shows the forces acting on the bird in the position shown?
B
Lift
Lift
centripetal
force
weight
weight
D
Lift
Lift
centrifugal
force
centripetal
force
weight
14
weight
Four planets A, B, C and D have masses and radii as given below. M is the mass and R is
the radius of Earth.
On which planet would the acceleration due to gravity at the surface be the same as that on
the surface of Earth?
A
B
C
D
Mass of planet
Radius of planet
2M
2R
1
M
2
1
M
2
1
R
2
1
R
2
1
R
2
www.erwintuition.com
www.erwintuition.com
15
Y
X
P
M
N
P is a planet with centre O. X and M are two points of equal gravitational potential. Y and
N are two other points of equal potential. Which one of the following is NOT correct?
A
B
16
The work needed to move a mass from X to N is equal to the work needed to move a
mass from M to Y.
A particle of mass 0.50 kg moves in simple harmonic motion according to the equation
x = 2.0 sin 25t where x is in metres and t is in seconds.
The maximum energy of the particle is
A
17
50 J
310 J
630 J
1300 J
A conical pendulum undergoes uniform circular motion in a horizontal plane. The radius of
the circular path is 0.700 m and the time taken to complete one revolution is 1.25 s. A lamp
shines on the pendulum bob as shown in the figure below.
lamp
screen
The shadow of the bob on the screen was observed to move back and forth along a
horizontal line with
A
B
C
D
www.erwintuition.com
www.erwintuition.com
10
18
A solar furnace made from a concave mirror of area 0.40 m2 is used to heat water. The
radiant energy from the sun arrives at the mirrors surface at a rate of 1400 W m-2. The
specific heat capacity of water is 4200 J kg-1 K-1.
What is the best estimate of the least time that the furnace takes to heat 2.0 kg of water
from 20 C to 50 C?
A
19
7.5 min
230 min
450 min
An inexpansible vessel initially contains 0.020 kg of gas at 300 K. What is the mass of gas
that has escaped from the vessel if it is heated from 300 K to 400 K under constant
pressure?
A
20
3.8 min
0.0050 kg
0.0075 kg
0.012 kg
0.015 kg
A fixed mass of ideal gas undergoes changes of pressure and volume as shown below.
pressure
S
volume
When the gas is taken from state P to state R by the stages PQ and QR, 8 J of heat are
absorbed by it and 3 J of work are done by it. When the same resultant change is achieved
by stages PS and SR, 1 J of work is done by the gas. In this case,
21
The intensity of a wave depends on the amplitude. It is also proportional to the square of
the frequency. The variation with time t of the displacement x of the particles in a medium
when two progressive waves P and Q pass separately through the medium are shown in
the graphs below.
www.erwintuition.com
16Io
www.erwintuition.com
11
22
Monochromatic light of wavelength 4.0 x 10-7 m passes through two narrow slits and
produces light and dark fringes on a screen.
What is the separation of the slits such that the angular separation between the two first
order bright fringes is 4.00 x10-4 rad?
23
0.5 x 10-3 m
1.0 x 10-3 m
1.50 x 10-3 m
2.0 x 10-3 m
A diffraction grating ruled with 5000 lines per cm is illuminated with white light.
If the wavelength for yellow light and violet light are 600 nm and 400 nm respectively, which
one of the following statements is NOT correct?
The red end of the first-order spectrum is closer to the central image than the violet
end of the first-order spectrum.
The second-order image of the yellow light coincides with the third-order image of
violet light.
24 A, B, C and D are four points on a straight line as shown. A point charge +Q is fixed at A.
+Q
I
B
I
C
I
D
When another point charge Q is moved from B to C, which one of the following quantities
will increase?
www.erwintuition.com
www.erwintuition.com
12
25
Two charges q1 and q2 are placed at two corners of an equilateral triangle as shown in the
figure. The resultant electric field at point A is directed to the left as indicated.
A
q1
q2
26
q2 = q1
q2 =
2 q1
q2 = - q1
q2 = - 2 q1
Two cells of e.m.f E1 and E2 and negligible resistance are connected with two variable
resistors as shown in the diagram.
When the galvanometer deflection is zero, the resistances of the variable resistors are P
E2
and Q. What is the value of the ratio
?
E1
27
P
Q
P
P +Q
Q
P +Q
P +Q
P
A2
A1
Assuming that both ammeters have negligible resistance, what is the reading on ammeter A2?
4.5 A
6.0 A
13.5 A
www.erwintuition.com
18.0 A
www.erwintuition.com
13
28
In the circuit below, R1, R2 and R3 are fixed resistors and R is a thermistor.
What happens to the currents I1 and I2 when the temperature at the thermistor increases?
29
I1 decreases, I2 increases
I1 increases, I2 decreases
I1 increases, I2 increases
A 20-turn square coil of side 8.0 mm is pivoted at the centre and placed in a magnetic field
of flux density 0.010 T such that two sides of the coil are parallel to the field and two sides
are perpendicular to the field, as shown in the figure. A current of 5.0 mA is passed through
the coil.
magnetic field
8.0 mm
axis of pivot
What is the torque created on the coil?
1.6 x 10-9 N m
3.2 x 10-8 N m
6.4 x 10-8 N m
www.erwintuition.com
3.2 x 10-5 N m
www.erwintuition.com
14
30
An electron is moving in air at right angles to a uniform magnetic field. The diagram below
shows the path of the electron. The electron is slowing down.
Which one of the following correctly gives the direction of motion of the electron and the
direction of the magnetic field?
31
Direction of motion
clockwise
clockwise
anti-clockwise
anti-clockwise
The figure below shows a copper disc rotating steadily about its centre O in a uniform
magnetic field between two bar magnets. The magnetic field is acting perpendicularly to
the disc.
R
Which of the following graphs correctly shows the variation of the induced e.m.f.
between the centre O and a point R on the rim of the disc with time t?
www.erwintuition.com
www.erwintuition.com
15
32
The diagram below shows a wire carrying a current I. The magnetic flux density due to
0 I
the straight wire is given by B =
. A straight conductor PQ is placed in the same
2r
vertical plane as the wire and is moved at constant speed v away from the wire.
v
r
Q
How will the magnitude of the induced e.m.f. in PQ vary and which end will be at a higher
potential?
33
decreases
decreases
increases
increases
A
34
0.024%
0.036%
0.048%
35
0.018%
0.25 Io2R
0.50 Io2R
0.71 Io2R
1.41 Io2R
After the collision, the de Broglie wavelengths of the -particle and the carbon nucleus are
f and c respectively. Which of the following is a true statement related to the de Broglie
wavelengths?
i > f
i < f
f = c
www.erwintuition.com
i = (c
www.erwintuition.com
16
36
The apparatus shown below is used to measure the stopping potential Vs for
photoelectrons emitted from a metal surface. Vs is measured for different frequencies of
light incident on the surface.
incident light
Vs
metal plate
current
detector
fo
The variation with the frequency f of the stopping potential Vs is shown above.
From the graph, it may be deduced that
37
all the photoelectrons have the same kinetic energy for a given value of f.
C
D
The diagram shows two spectra for X-rays from an X-ray tube.
A
B
C
D
www.erwintuition.com
www.erwintuition.com
17
38
Which one of the following does not provide evidence for the wave nature of particles?
A
B
C
D
39
Quantum tunneling
Electron diffraction
Photoelectric effect
De Broglie hypothesis
The fusion of two deuterium nuclei produces a nuclide of helium plus a neutron and
liberates 3.27 MeV of energy.
How does the mass of the two deuterium nuclei compare with the combined mass of the
helium nucleus and neutron?
A
B
C
D
40
Given that nuclide Y has a half-life of 1.5 days, what is the half-life of nuclide X?
2.0 days
3.0 days
www.erwintuition.com
4.5 days
6.0 days
www.erwintuition.com
INDEX
NUMBER
PHYSICS
9646/02
13 September 2010
1 hour 45 minutes
www.erwintuition.com
www.erwintuition.com
2
Data
speed of light in free space,
4 x 10-7 H m-1
elementary charge,
1.60 x 10-19 C
6.63 x 10-34 J s
1.66 x 10-27 kg
me
9.11 x 10-31 kg
mp
1.67 x 10-27 kg
NA =
gravitational constant,
9.81 m s-2
www.erwintuition.com
www.erwintuition.com
3
Formulae
uniformly accelerated motion,
ut + at2
v2
u2 + 2as
pV
gh
Gm
r
xo sin t
vo cos t
R 1 + R2 +
1/R
1/R1 + 1/R2 +
electric potential,
Q / 4or
alternating current/voltage,
xo sin t
transmission coefficient,
exp(-2kd)
where k
xo exp (-t)
0.693
t1
resistors in series,
resistors in parallel,
radioactive decay,
decay constant,
(x
2
o
x2
8 2 m ( U E )
h2
www.erwintuition.com
www.erwintuition.com
4
Section A
Answer all the questions.
It is recommended that you spend about 1 hour 15 minutes on this section.
The velocity-time graph in Fig. 1.1 shows the first 1.6 s of the motion of a ball which is
thrown vertically downward at an initial speed of 6.0 m s1.
v / m s1
10
0.8
1.6
t/s
6
12
Fig. 1.1
(a)
How far does the ball travel before hitting the ground?
distance travelled =
(b)
[2]
[1]
m s 2
[1]
What is the maximum height attained by the ball after it hits the ground?
maximum height =
(c)
Calculate the magnitude of the acceleration of the ball when it is in the air.
acceleration =
www.erwintuition.com
www.erwintuition.com
5
(d)
time =
(e)
[1]
t/s
Fig. 1.2
[2]
www.erwintuition.com
www.erwintuition.com
6
2
(a)
[1]
(b)
Fig. 2.1 shows a mass-spring system consisting of an air track vehicle V of mass 0.60
kg. A peg attached to V is connected to two springs that are both fixed at the other
end. When V is displaced along the air track and released, it oscillates about its rest
position. The vehicle V floats on a cushion of air and there is negligible friction
between V and the air track.
Fig. 2.1
Fig. 2.2 shows how the kinetic energy EK of V varies with its displacement s from the
rest position when the initial displacement is 0.16 m.
Ek/J
Fig. 2.2
www.erwintuition.com
www.erwintuition.com
7
(i) Draw, on Fig. 2.2, a graph showing how the potential energy of the mass-spring
system varies with displacement s.
[2]
(ii) Calculate the frequency of the oscillation.
Hz
frequency =
[2]
(iii) Calculate the maximum force acting on the air track vehicle V.
maximum force =
www.erwintuition.com
[2]
www.erwintuition.com
8
3
(a)
[1]
(b)
magnetic field
down into paper
-200
-100
100
200 mm
Fig. 3.1
(i) The electrons are observed to travel in a circle of radius 83 mm. Calculate the
speed of the electrons.
speed =
www.erwintuition.com
m s-1
[3]
www.erwintuition.com
9
(ii) On Fig. 3.1, draw a possible path of the electrons.
[1]
(iii) The initial direction of the electron beam is then changed so that it makes an
angle of 80o to the magnetic field. The electrons then travel in a helical path, as
illustrated in Fig. 3.2.
Fig. 3.2
The helical path appears to be circular when viewed along the direction of the
magnetic field but the electrons have a constant velocity along the field.
Explain why the electrons follow a helical path.
[2]
www.erwintuition.com
www.erwintuition.com
10
4
(a)
State, in words, the relation between the increase in internal energy of a gas, the work
done by the gas, and the heat supplied to the gas.
[1]
(b)
A scuba diver releases an air bubble, of diameter 3.0 cm, from a depth of 14 m below
the sea level. Assume that air behaves as an ideal gas and the temperature of water is
constant at 25 C.
(i) Given that the density of water is 1000 kg m-3 and the atmospheric pressure is
1.0 x 105 Pa, show that the pressure of the water at a depth of 14 m is 2.4 x 105
Pa.
[1]
(ii) Hence calculate the volume of the air bubble when it reaches the surface
of water.
www.erwintuition.com
m3
[3]
www.erwintuition.com
11
(iii)
Sketch a clearly labeled graph in Fig. 4.1 showing the variation of pressure P
with volume V of the air bubble as it rises from the sea.
P/Pa
V/m3
Fig. 4.1
[2]
(iv)
Use the relation stated in (a) to deduce whether heat is added or removed from
the air bubble as the bubble rises.
[2]
www.erwintuition.com
www.erwintuition.com
12
5
(a)
Use the band theory to account for the electrical properties of intrinsic semiconductors.
[3]
(b)
Fig. 5.1 shows a p-type semiconductor placed in contact with another of n-type.
depletion layer
n
Fig. 5.1
Discuss the origin of the depletion region and how it helps the p-n junction to act as a
rectifier.
[3]
www.erwintuition.com
www.erwintuition.com
13
6
(a)
235
92 U present
of 239
94 Pu in sample
mass of
6.0 10-6 kg
activity
[1]
(b)
239
94 Pu
[1]
(c)
239
94 Pu .
decay constant =
www.erwintuition.com
s-1
[2]
www.erwintuition.com
14
(d)
Explorers assume that the material was originally pure plutonium which decayed to
produce the uranium.
(i) Show that the fraction of the original plutonium atoms that remains undecayed is
0.25.
[2]
(ii) Hence calculate, in years, how far into the future the extract is set.
time =
www.erwintuition.com
years
[3]
www.erwintuition.com
15
In an experiment to investigate the light emitted by a filament lamp, the light output for a
lamp rated at 12 V, 20 W was investigated when a range of potential differences was applied
across it.
(a)
current =
[2]
resistance =
[1]
(b)
Draw a circuit diagram showing how you would connect the lamp to a 12 V battery and
a 10 rheostat such that the potential difference across the lamp can be varied
between 0 and 12 V.
Include in your diagram:
- a switch, situated so that the battery supplies no current when the switch is open;
- a voltmeter and an ammeter, which will enable the power supplied to the lamp to
be determined.
[3]
www.erwintuition.com
www.erwintuition.com
16
(c)
The lamp drawn in (b) is now used to illuminate the LDR as shown in Fig. 7.1.
The LDR is then connected to a circuit as shown in Fig. 7.2 where it is used in
investigating the intensity of the light output of the lamp. The battery in the circuit is
assumed to have negligible internal resistance and the milliammeter has a full scale
deflection of 10 mA.
in
Fig. 7.2
LDR
Fig. 7.1
Fig. 7.2
The graph in Fig. 7.3 shows how the resistance R of the LDR varies with the incident
illumination L, which is measured in W m-2. Both resistance and illumination are
plotted using log10 scales.
5
Log10 (R/)
Fig. 7.3
www.erwintuition.com
Log10 (L/Wm-2)
www.erwintuition.com
17
(i) To enable maximum use of the available illumination range, a full scale
deflection of the milliammeter is required when the lamp is operating at
maximum brightness. Explain the steps you would take in order to obtain this
initial condition.
[2]
(ii) Calculate the minimum resistance of the LDR when the milliammeter is at its full
scale deflection.
minimum resistance =
[2]
(iii) Use Fig. 7.3 to show that the maximum illumination which can be measured,
using the circuit shown in Fig. 7.2, is about 1000 W m-2.
[2]
(iv) If the uncertainty of the milliammeter is 0.5 mA, determine whether there is a
detectable current when the illumination is 10 W m-2.
[3]
www.erwintuition.com
www.erwintuition.com
18
Section B
It is recommended that you spend about 30 minutes on this section.
One type of radiation detector known as the Geiger-Muller tube is shown in Fig. 8.1.
Fig. 8.1
In order for the tube to function, a potential difference VAB has to be applied between A and B.
The Geiger-Muller tube can detect , and -radiation. The count rate of the radiation can be
measured by a suitable counter placed across A and B.
Design a laboratory experiment to investigate how the count rate due to -radiation only
depends upon the potential difference VAB. You have access to three different radioactive
sources only. Information relating to each of these sources is given in the table below.
You may assume that the following equipment is available, together with any other apparatus
that may be found in a school or college science laboratory.
Aluminium plates of different thicknesses, Ammeter, Voltmeter, Connecting wires, GeigerMller tube, Lead plates of different thicknesses, Metre rule, Oscilloscope, Datalogger,
Ratemeter, Scalar, Signal generator, Source handling tool, Variable d.c. power supply
You should draw a diagram showing the arrangement of your apparatus. In your account you
should pay particular attention to
(a) which source you would use, giving a reason for your choice,
(b) the procedure to be followed, including how the count rate would be measured,
(c) the control of variables,
(d) any safety precautions you would take.
[12]
www.erwintuition.com
www.erwintuition.com
19
Diagram
www.erwintuition.com
www.erwintuition.com
20
www.erwintuition.com
www.erwintuition.com
21
www.erwintuition.com
www.erwintuition.com
CANDIDATE
NAME
CIVICS
GROUP
INDEX
NUMBER
PHYSICS
9646/03, 9745/03
17 September 2010
2 hours
Section B
Answer any two questions.
5
6
7
Total
www.erwintuition.com
www.erwintuition.com
Data
speed of light in free space,
4 x 10-7 H m-1
elementary charge,
1.60 x 10-19 C
6.63 x 10-34 J s
1.66 x 10-27 kg
me
9.11 x 10-31 kg
mp
1.67 x 10-27 kg
NA =
gravitational constant,
9.81 m s-2
www.erwintuition.com
www.erwintuition.com
Formulae
uniformly accelerated motion,
ut + at2
v2
u2 + 2as
pV
gh
Gm
r
xo sin t
vo cos t
R 1 + R2 +
1/R
1/R1 + 1/R2 +
electric potential,
Q / 4or
alternating current/voltage,
xo sin t
transmission coefficient,
exp(-2kd)
where k
resistors in series,
resistors in parallel,
radioactive decay,
decay constant,
(x
2
o
x2
8 2 m ( U E )
h2
xo exp (-t)
0.693
t1
2
www.erwintuition.com
www.erwintuition.com
4
Section A
Answer all the questions in this section.
In a nuclear reactor, a fast moving neutron with initial speed u1 makes a head-on elastic
collision with a stationary nucleus of carbon-12. The speed of the neutron and the carbon
nucleus after the collision are v1 and v2 respectively as shown in Fig. 1.1.
Before collision
After collision
v2
u1
neutron
v1
carbon nucleus
neutron
carbon nucleus
Fig 1.1
(a)
[2]
(b)
In an elastic collision, the relative speed of separation is equal to the relative speed of
approach. Write an equation in terms of the velocities given to illustrate this fact.
[1]
(c)
By considering your answer to (b), find the ratio of the final speed of the neutron v1 to its
initial speed u1.
www.erwintuition.com
www.erwintuition.com
(d)
[3]
ratio =
Hence determine the fraction of the kinetic energy of the neutron that is transferred to
the carbon nucleus.
fraction =
(e)
[3]
If the head-on elastic collision is with a stationary neutron instead of carbon-12, how
would the answers in part (c) and (d) be different? In your explanation, state the new
ratio of the speeds and the new fraction of the kinetic energy transferred.
[3]
www.erwintuition.com
www.erwintuition.com
(a)
Fig. 2.1 shows some of the electric field lines around a metal needle which is held at a
high positive voltage.
Fig. 2.1
(i) Draw two equipotential lines around the charged metal needle.
[1]
(ii) Suggest the effect of the electric field on a single air molecule near the needle tip
as electrical breakdown of the air occurs.
[2]
(b)
Fig. 2.2 shows a charged conducting sphere of diameter 4.0 mm which is connected
to an insulating rod. The electric field strength at the surface of the conducting sphere
is 1.13 x 107 V m-1.
insulating rod
Fig. 2.2
www.erwintuition.com
www.erwintuition.com
(i)
Calculate
1. the magnitude of the charge on the conducting sphere.
magnitude of charge =
[2]
(ii)
[2]
Fig. 2.3
The balance can record masses to the nearest 0.001 g. The initial reading on
the balance before the second charged sphere is clamped above the first sphere
is 8.205 g.
www.erwintuition.com
www.erwintuition.com
1.
Assuming that the spheres behaves like point charges, determine the final
reading on the balance.
[3]
[2]
www.erwintuition.com
www.erwintuition.com
Fig. 3.1
The small coil is connected to a sensitive voltmeter.
(a)
[1]
(b)
Indicate on Fig. 3.1 the direction of the magnetic field inside the solenoid.
(c)
The resistance of the variable resistor is changed so that the current in the solenoid
increases. Using the laws of electromagnetic induction, explain why a reading is
recorded on the voltmeter.
www.erwintuition.com
[1]
www.erwintuition.com
10
[3]
(d)
The current in the solenoid is now made to vary as shown in Fig. 3.2.
Fig 3.2
Sketch the variation with time of the e.m.f. induced in the small coil in Fig. 3.3.
e.m.f./ V
Fig. 3.3
www.erwintuition.com
[1]
www.erwintuition.com
11
(a)
(i)
[1]
(ii)
Sketch a graph in Fig. 4.1 to show the variation of the binding energy per
nucleon with nucleon number.
[1]
Binding
energy per
nucleon
Fig. 4.1
nucleon number
(iii) By reference to your graph drawn in (a)(ii), explain how fission can be a potential
source of energy.
[2]
www.erwintuition.com
www.erwintuition.com
12
(b)
When a uranium-235 nucleus undergoes fission, two nuclides are produced with
the release of energy as shown in the equation below.
235
92 U
1
0n
139
54 Xe
95
38 Sr
+ 2 01n
Mass
235.043929 u
139
54 Xe
138.918793 u
95
38 Sr
94.919359 u
1
0n
1.008665 u
energy released =
www.erwintuition.com
[3]
www.erwintuition.com
13
time =
days
[3]
Section B
Answer two questions in this section.
(a)
Use Newtons laws of motion to explain why a body moving with uniform speed in a
circle must experience a force towards the centre of the circle.
[2]
(b)
A small mass m and a heavy mass M are connected to the ends of an inextensible
string. The string is threaded through a glass tube as shown in Fig. 5.1. The tube is
then held by a student and is whirled so that the mass m rotates with a constant radius
r at a frequency of 180 revolutions per minute. Given that m = 0.10 kg and M = 1.0 kg.
Fig. 5.1
M
tension =
www.erwintuition.com
[1]
www.erwintuition.com
14
r=
[2]
[2]
(iv) Explain whether it is possible for the small mass m to be whirled in such a
way that the string attached to it becomes horizontal.
[2]
(c)
Write down an equation to represent Newtons Law of Gravitation, stating clearly the
symbols used.
[2]
(d)
Data for a certain planet orbiting about a star are given below:
Mass of planet
Diameter of planet
Diameter of star
= 1.20 x 1024 kg
= 7.50 x 106 m
= 7.00 x 108 m
www.erwintuition.com
www.erwintuition.com
15
Orbital period of planet
Distance from centre
of planet to centre of star
(i)
= 3.45 x 107 s
= 2.00 x 1011 m
mass of star =
(ii)
kg
[3]
In the absence of other celestial bodies, the only force acting on the star and the
planet is the gravitational force of attraction they exert on each other. Explain
why the planet does not accelerate and crash into the star.
[2]
(iii)
Use the data given to calculate the escape velocity of a mass on the planet.
Ignore the gravitational effects of the star on the mass.
escape velocity =
(iv)
m s-1
[3]
www.erwintuition.com
www.erwintuition.com
16
atmosphere.
[1]
(a)
[1]
(b)
Fig. 6.1 shows two loudspeakers S1 and S2 connected to the same sound source such
that they emit sound waves of the same intensity and wavelength. A sound detector is
placed at point P such that S1P = S2P initially.
S1
S2
Fig. 6.1
(i)
As the loudspeaker S1 is moved slowly away from P along the line PS1 towards X,
the sound detected at P fluctuates in intensity. Explain this observation.
www.erwintuition.com
www.erwintuition.com
17
[3]
(ii)
wavelength of sound =
(iii)
[2]
If S1 remains at point X and the frequency f of the sound emitted from both
loudspeakers is now gradually changed to 4100 Hz, the sound intensity detected
at P increases from the minimum in (b)(ii) to a maximum. Estimate a value for
the speed of sound.
speed of sound =
(c)
m s-1
[3]
In a second experiment to determine the speed of sound, a long tube, fitted with a tap, is
filled with water. A tuning fork is sounded above the top of the tube as the water is
allowed to run out of the tube, as shown in Fig. 6.2.
www.erwintuition.com
www.erwintuition.com
18
Fig. 6.2
Fig. 6.3
A loud sound is first heard when the water level is as shown in Fig. 6.2, and then again
when the water level is as shown in Fig. 6.3.
Fig. 6.2 illustrates a stationary wave produced in the tube.
(i)
[2]
(ii)
Explain, by reference to resonance, why the loudness of the sound changes as the
water level changes.
www.erwintuition.com
www.erwintuition.com
19
[3]
(iii) On Fig. 6.3, sketch the form of the stationary wave set up in the tube.
(iv)
[1]
The frequency of the fork is 512 Hz and the difference in the height of the water
level for the two positions where a loud sound is heard is 32.4 cm.
Calculate the speed of the sound in the tube.
speed of sound =
(v)
m s-1
[3]
The length of the column of air in the tube in Fig. 6.2 is 15.7 cm.
Suggest where the antinode of the stationary wave produced in the tube in
Fig. 6.2 is likely to be found.
[2]
www.erwintuition.com
www.erwintuition.com
20
(a)
Fig. 7.1 shows a filament bulb emitting white light surrounded by a region of cooler
helium gas.
cooler
helium gas
bulb emitting
white light
Fig. 7.1
[2]
2. point B
www.erwintuition.com
www.erwintuition.com
21
[2]
(b)
Fig. 7.2 shows some of the energy levels of an isolated atom of helium.
n=5
n=4
-2.18
-3.40
n=3
-6.04
n=2
-13.6
n=1
-54.4
energy in eV
Fig. 7.2
(i) An electron with kinetic energy 50 eV collides inelastically with a helium atom in
the ground state. State which transitions might take place following this collision.
[2]
(ii) Calculate the longest wavelength of the radiation that is emitted from these
transitions.
wavelength =
[2]
(iii) When helium atoms are used in a helium-neon laser, it is essential that one of its
excited states is a metastable state so that population inversion can take place.
Explain
www.erwintuition.com
www.erwintuition.com
22
1.
2.
[3]
(c)
An evacuated tube contains two plane, parallel, metal electrodes, one of which is an
emitter of electrons and the other a collector. When the emitter is illuminated with
electromagnetic radiation of photon energy 4.7 eV at a power of 3.8 mW,
photoelectrons are emitted. The potential difference V between the collector and the
emitter is adjusted, and the photocurrent I is measured. Fig. 7.3 shows the variation of
I of V.
I /10-8 A
1.0 -
0.5 -
-1
Fig. 7.3
(i) Calculate the rate at which photons are incident on the emitter.
www.erwintuition.com
V/V
www.erwintuition.com
23
s-1
[2]
s-1
[2]
(ii) Calculate the maximum rate at which electrons leave the emitter.
maximum rate =
(iii) Comment on, and suggest an explanation for, any difference between your
answers to (c)(i) and (ii).
[2]
(iv) Calculate the maximum kinetic energy at which the electrons leave the emitter.
www.erwintuition.com
[2]
www.erwintuition.com
24
work function =
www.erwintuition.com
[1]