Beruflich Dokumente
Kultur Dokumente
AAMCS-AMP-20M-520M-40dB-47dBm
PRESENTATION
The Model Number AAMCS-20M-520M-40dB-47dBm is a solid state high power, class AB or A operation, broadband, RF amplifier that covers 20 MHz to 520 MHz. Because this power amplifier offers high power over a multioctave bandwidth, it is well suited for broadband commercial applications, laboratory or jamming applications. It is
packaged in a modular housing that is approximately 25012550 mm. This amplifier offers a minimum gain of 39 dB
with a typical gain flatness of 1.5 dB, typical OIP3 is 50 dBm and a very fast rise time of 100 ns. This RF module
requires an input voltage of 28 Vdc. Input/output RF connectors are N Female, SMA or TNC. DC and voltage commands are accessible via 6 pin bayonet connector. This amplifier has a typical P1dB of 50 watts at room temperature
and operates from -40 C to +85 C.
FEATURES
SPECIFICATIONS
Electrical specifications
Measuring Conditions
Specifications
Bandwidth
Output power
@P1dB
Max. 5 dBm
Gain
@P1dB
Min. 39 dB Typ. 42 dB
Bandwidth ripple
@P1dB
1.5 dB
Input VSWR
@P1dB
Output VSWR
@P1dB
Open
OIp3
Spurious Signal
-60 dBc
Consumption
@ small signal
@ 50 W 25C Vcc = 28 V
Typ. 3 A Max. 4 A
Typ. 6 A Max. 7 A
250 125 50 mm
Specifications are subject to change without notice
AVAILABLE OPTIONS
Temperature protection
Custom specification
PRESENTATION
The Model Number AAMCS-10M-820M-48dB-30dBm is a solid state broadband amplifier that covers 10 MHz to
820 MHz. Because this amplifier offers power over a multi-octave bandwidth, it is well suited for broadband commercial applications, communication, laboratory or jamming applications. It is packaged in a compact and low
weight modular housing that is approximately 804024 mm of 130 g. This amplifier offers a minimum gain of 46
dB with a maximum gain flatness of 1 dB, typical OIP3 is 47 dBm and minimum RF pulse width of 5 s. This RF
module requires an input voltage of 12 to 16 Vdc. Input/output RF connectors are SMA Female, and DC voltage
commands are accessible via solderable feedthru. This amplifier has a minimum P1dB of 27 dBm at room temperature and operates from -40 C to +45 C.
FEATURES
SPECIFICATIONS
Electrical specifications
Measuring Conditions
Specifications
Bandwidth
Output power
Gain
25C Vcc = 15 V
Bandwidth ripple
1 dB
Input VSWR
Max. 2:1
Output VSWR
Max. 2.5:1
OIp3
Noise Figure
Spurious Signal
@Pout = 20 dBm
Consumption
@25C, Vcc = 15 V
80 40 24 mm
Specifications are subject to change without notice
AVAILABLE OPTIONS
PRESENTATION
The Model Number AAMCS-AMP-380M-670M-11dB-45dBm is a class A, high power, linear RF amplifier that covers
380 MHz to 670 MHz. Due to its good linearity, it is well suited for TETRA (TErrestrial Trunked RAdio) applications
such as emergency services or telecommunication, transport and government Private Mobile Radio networks. It is
packaged in a small modular housing and offers a typical gain of 11 dB with a typical gain flatness of 2 dB on the
total bandwidth. Typical OIP3 is 52 dBm and input/output VSWR is 1.9:1 minimum. This RF module requires an input
voltage of 12.5 V maximum. This amplifier is equipped with input/output RF connectors N female and TNC female
respectively. It has a minimum P1dB of 45 dBm and can operate from -10 C to +55 C.
FEATURES
Gain 10 dB minimum
SPECIFICATIONS
Electrical specifications
Measuring Conditions
Specifications
Bandwidth
Output power
@P1dB
Gain
@P1dB
Min. 10 dB Typ. 11 dB
Bandwidth ripple
@P1dB
Typ. 2 dB Max. 3 dB
Input/Output VSWR
@P1dB
Max 1.9:1
OIp3
Spurious Signal
@Pout = 10 W
-60 dBc
Supply Voltage
Consumption
Typ. 4 A Max. 6 A
Without heat-sink
With heat-sink
120 80 27 mm
120 80 105 mm
Specifications are subject to change without notice
AVAILABLE OPTIONS
Temperature protection
We can design from this basis, a custom product to fulfil your requirements
AA-MCS 18, rue Nicolas Appert 91898 ORSAY (France) Tel : 33 (0)1 76 91 50 12 Fax : 33 (0)1 76 91 50 31 www.aa-mcs.com
FEATURES
SPECIFICATIONS
Electrical specifications
Measuring Conditions
Specifications
Bandwidth
Output power
@P1dB
Min. 15 dBm
-30 dBm
Gain
Min. 50 dB
Bandwidth ripple
On total bandwidth
0.5 dB
Input/Output VSWR
Max 1.25:1
Noise Figure
@25C
Max. 0.9
OIp3
Noise Figure
@25C
Consumption
Vcc = 15 V
Max. 100 mA
100 86 25 mm
Specifications are subject to change without notice
AVAILABLE OPTIONS
AAMCS-2200M-2300M-50dB-15dBm, 2.2GHz-2.3GHz
AAMCS-2500M-2700MHz-50dB-15dBm, 2.5GHz-2.7GHz
AAMCS-1700M-2000M-50dB-15dBm, 1.7GHz-2GHz
AAMCS-900M-1000M-40dB-40dBm, 0.9GHz-1GHz
AA-MCS 18, rue Nicolas Appert 91898 ORSAY (France) Tel : 33 (0)1 76 91 50 12 Fax : 33 (0)1 76 91 50 31 www.aa-mcs.com
Power Amplifier
AAMCS-AMP-1620M-1670M-45dB-48dBm
PRESENTATION
The Model Number AAMCS-1620M-1670M-45dB-48dBm is a solid state, class AB operation, power amplifier that
covers 1620 MHz to 1670 MHz. This power amplifier has been developed for INMARSAT application and offers
power in a compact package module of approximately 1808028 mm. This amplifier offers a minimum gain of 44
dB with a maximum gain flatness of 1 dB, typical OIP3 is 55 dBm. This RF module requires an input voltage of 28
10% Vdc. Input/output RF connectors are N Female, and DC voltage command is accessible via 3 ways square
flange connector. This amplifier has a minimum P1dB of 45 dBm at room temperature and operates from 20 C to
+70 C.
FEATURES
SPECIFICATIONS
Electrical specifications
Measuring Conditions
Specifications
Bandwidth
Output power
Gain
Bandwidth ripple
Input VSWR
Min. 14 dB
Output VSWR
Min. 14 dB
OIp3
@30 W
Spurious Signal
@P1dB
Consumption
180 80 30 mm
Specifications are subject to change without notice
AVAILABLE OPTIONS
We can design from this basis, a custom product to fulfil your requirements
AA-MCS 18, rue Nicolas Appert 91898 ORSAY (France) Tel : 33 (0)1 76 91 50 12 Fax : 33 (0)1 76 91 50 31 www.aa-mcs.com
PRESENTATION
The Model Number AAMCS-AMP-2500M-2700M-50dB-46dBm is a Solid State Power Amplifier for an outdoor operating purpose in the S-band frequencies. This amplifier has been designed for antenna mount integrations and is well
suited for satellite communication systems, telemetry and tracking applications. It is provided in a weatherproof enclosure with a complete power supply, a filter and a microcontroller card. Output saturated power reaches 46 dBm
typically, with a minimum gain of 50 dB 1 dB on the total bandwidth. Input/output VSWR is 1.3:1/1.4:1 max. This RF
module requires an input voltage of 220 Vac(10%)/50 Hz. This amplifier is able to operate in safety stand alone
mode in extremely varying environment from -40 C to +60 C. It is equipped with SMA-K and N female connectors
type in input and output respectively.
FEATURES
SPECIFICATIONS
Electrical specifications
Measuring Conditions
Specifications
Bandwidth
Output power
@P1dB
Gain
Min. 45 dB Typ. 50 dB
Bandwidth ripple
1 dB
Gain Slope
/50 MHz
Max. 0.5 dB
Gain stability
@25 C 5 C
0.25 dB dB/24h
Gain control
Step: 0.1 dB
30 dB
Input VSWR
Output VSWR
Max 1.3:1
Max 1.4:1
Intermodulation distorsion
@P1dB -4 dBm
Spurious Signal
Pout = 45 dBm
Consumption
@Pout = 45 dBm
Max. 300 W
AVAILABLE OPTIONS
We can design from this basis, a custom product to fulfil your requirements
AA-MCS 18, rue Nicolas Appert 91898 ORSAY (France) Tel : 33 (0)1 76 91 50 12 Fax : 33 (0)1 76 91 50 31 www.aa-mcs.com
FEATURES
SPECIFICATIONS
Electrical specifications
Measuring Conditions
Specifications
Bandwidth
Output power
Gain
Min. 68 dB Typ. 70 dB
Bandwidth ripple
On total bandwidth
0.5 dB
Gain Slope
/50 MHz
Max. 0.1 dB
Gain stability
@25 C 5 C
Gain control
Step: 0.1 dB
30 dB
Input/Output VSWR
Max 1.2:1
Intermodulation distorsion
@P1dB -4 dB
-28 dBc
Spurious Signal
@P1dB
Max. 80 dBc
Consumption
AVAILABLE OPTIONS
Custom specification
Module alarms
We can design from this basis, a custom product to fulfil your requirements
AA-MCS 18, rue Nicolas Appert 91898 ORSAY (France) Tel : 33 (0)1 76 91 50 12 Fax : 33 (0)1 76 91 50 31 www.aa-mcs.com
FEATURES
SPECIFICATIONS
Electrical specifications
Measuring Conditions
Specifications
Bandwidth
Output power
Gain
Min. 50 dB Typ. 53 dB
Bandwidth ripple
On total bandwidth
1 dB
Gain Slope
/50 MHz
Max. 0.5 dB
Gain stability
@25 C 5 C
Gain control
Step: 0.1 dB
30 dB
Input VSWR
Output VSWR
Max 1.3:1
Max 1.4:1
Intermodulation distorsion
@P1dB -4 dB
-28 dBc
Spurious Signal
@P1dB
Consumption
Pout = 45 dBm
Max. 700 W
AVAILABLE OPTIONS
We can design from this basis, a custom product to fulfil your requirements
AA-MCS 18, rue Nicolas Appert 91898 ORSAY (France) Tel : 33 (0)1 76 91 50 12 Fax : 33 (0)1 76 91 50 31 www.aa-mcs.com
PRESENTATION
The Model Number AAMCS-AMP-2200M-2300M-68dB-54dBm is a Solid State High Power Amplifier for an outdoor
operating purpose in the S-band frequencies. This amplifier has been designed for antenna mount applications such
as satellite communication systems, telemetry and tracking applications. It is provided in a weatherproof enclosure
with a complete power supply, a filter and a microcontroller card. Output saturated power reaches 54 dBm typically,
with a minimum gain of 65 dB and a typical gain flatness of 1 dB on the total bandwidth. Input/output VSWR is
1.25:1 max. This RF module requires an input voltage of 220 Vac(10%)/50 Hz. It is able to operate in safety stand
alone mode in extremely varying environment from -40 C to +60 C. It is equipped with SMA-K and N female connectors type for the input and output respectively.
FEATURES
SPECIFICATIONS
Electrical specifications
Measuring Conditions
Specifications
Bandwidth
Output power
@P1dB
Gain
Min. 65 dB Typ. 68 dB
Bandwidth ripple
1 dB
Gain Slope
/40 MHz
Max. 0.6 dB
Gain stability
@25 C 5 C
Gain control
Step: 0.1 dB
20 dB
Input/Output VSWR
Max 1.25:1
Intermodulation distorsion
@P1dB -3dB
Max. 28 dBc
Spurious Signal
@P1dB
Consumption
@P1dB
Max. 880 W
AVAILABLE OPTIONS
We can design from this basis, a custom product to fulfil your requirements
AA-MCS 18, rue Nicolas Appert 91898 ORSAY (France) Tel : 33 (0)1 76 91 50 12 Fax : 33 (0)1 76 91 50 31 www.aa-mcs.com
SPECIALITIES
Repeaters
Telemetry system
AVAILABLE OPTIONS
Weatherproof enclosure
Custom configuration
AA-MCS 18, rue Nicolas Appert 91898 ORSAY (France) Tel : 33 (0)1 76 91 50 12 Fax : 33 (0)1 76 91 50 31 www.aa-mcs.com