Beruflich Dokumente
Kultur Dokumente
Draft A
Date
2014-01-20
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
Contents
Contents
1 About This Document..................................................................................................................1
1.1 Scope..............................................................................................................................................................................1
1.2 Intended Audience..........................................................................................................................................................1
1.3 Change History...............................................................................................................................................................2
2 Overview.........................................................................................................................................3
2.1 Protocol Stack.................................................................................................................................................................4
2.2 Transmission Mode Configuration.................................................................................................................................6
3 Networking.....................................................................................................................................7
4 Related Features.............................................................................................................................9
4.1 Features Related to WRFD-050404 ATM/IP Dual Stack NodeB..................................................................................9
5 Network Impact...........................................................................................................................10
5.1 WRFD-050404 ATM/IP Dual Stack NodeB................................................................................................................10
6 Engineering Guidelines.............................................................................................................11
6.1 WRFD-050404 ATM/IP Dual Stack NodeB................................................................................................................11
6.1.1 When to Use ATM/IP Dual Stack NodeB.................................................................................................................11
6.1.2 Required Information................................................................................................................................................11
6.1.3 Planning.....................................................................................................................................................................11
6.1.4 Deployment...............................................................................................................................................................12
6.1.5 Performance Monitoring............................................................................................................................................18
6.1.6 Troubleshooting.........................................................................................................................................................18
7 Parameters.....................................................................................................................................21
8 Counters........................................................................................................................................40
9 Glossary.........................................................................................................................................59
10 Reference Documents...............................................................................................................60
ii
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
1.1 Scope
This document describes WRFD-050404 ATM/IP Dual Stack NodeB, including its technical
principles, related features, network impact, and engineering guidelines.
Before reading this document, familiarize yourself with the following documents:
l
ATM Transport Feature Parameter Description: describes the protocol stack, configuration
principles, networking, and engineering guidelines in Iub over ATM mode.
BSC6900 UMTS Initial Configuration Guide (or BSC6910 UMTS Initial Configuration
Guide) and 3900 Series Base Station Initial Configuration Guide: describe how to configure
the Iub/Iur/Iu interface.
3900 Series Base Station Hardware Description: describes the functions, specifications,
and panels of the NodeB interface boards.
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
Feature change
Changes in features of a specific product version
Editorial change
Changes in wording or addition of information that was not described in the earlier version
Draft A (2014-01-20)
This document is created for RAN16.0.
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
2 Overview
Overview
The Iub interface connects the RNC and the NodeB. When the Iub interface uses ATM and IP
hybrid transmission, the Iub over ATM&IP protocol stack is adopted.
This chapter describes the Iub over hybrid ATM&IP transmission mode of the BSC6900 when
the Iub interface works in non-transmission-resource-pool mode. For details about the
simultaneous use of ATM&IP hybrid transmission and transmission resource pool mode over
the Iub interface of the BSC6900 or BSC6910, see Transmission Resource Pool in RNC Feature
Parameter Description.
The ATM configurations and principles are the same for the BSC6900 and BSC6910.
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
2 Overview
When Iub over ATM&IP is used, the RNC supports the following transmission modes at the
data link layer:
l
ATM: ATM over E1/T1, ATM over channelized STM-1/OC-3, and ATM over
unchannelized STM-1/OC-3c
When Iub over ATM&IP is used, the BTS3900, BTS3900A, DBS3900, and BTS3902E support
the following transmission modes at the data link layer:
l
Control Plane
NodeB Application Part (NBAP) is the signaling protocol used for transmitting control plane
messages between the NodeB and the controlling RNC (CRNC) at the radio network layer.
In Iub over ATM&IP, the control plane can be configured in active/standby mode (an SAAL
link and an SCTP link are configured) to improve transmission reliability. Figure 2-2 shows a
configuration instance for the NodeB control port (NCP), which is the same for the
communication control port (CCP).
Issue Draft A (2014-01-20)
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
2 Overview
Figure 2-2 Control plane in the active/standby mode in Iub over ATM&IP
To add an NCP or CCP, you need to specify the bearer mode by setting the CARRYLNKT
(NCP)/CARRYLNKT(CCP) parameter on the RNC side.
l
If this parameter is set to SAAL or SCTP, the NCP and CCP are carried over an SAAL
link or an SCTP link.
In active/standby mode, each NCP or CCP is configured with an SAAL link and an SCTP link.
On the RNC side, you can specify the active link by setting the MAINLINK(ADD UCCP)/
MAINLINK(ADD UNCP) parameter on the RNC side and the BELONG parameter on the
NodeB side.
NCP data and CCP data are preferentially transmitted on the active link. If the active link is
unavailable, the data is automatically switched over to the standby link.
User Plane
The user plane at the radio network layer over the Iub interface uses a series of frame protocols
(FPs), including DCH FP, RACH FP, RACH FP, PCH FP, HS-DSCH FP, and E-DCH FP. These
FPs are responsible for transmitting data frames and control frames between the NodeB and
RNC, including user data and -user-related control data over the Uu interface.
In Iub over ATM&IP, the user plane can work in the active/standby mode (an AAL2 path and
an IP path are configured) to improve transmission reliability, as shown in Figure 2-3.
Figure 2-3 User plane in the active/standby mode in Iub over ATM&IP
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
2 Overview
NOTE
The configuration shown in Figure 2-3 is applicable only when the BSC6900 and BSC6910 use IP
transmission pools.
You can configure multiple AAL2 and IP paths over the Iub interface and specify the usage of
each path. You can specify the usage of an IP path by setting the PATHT parameter and the
usage of an AAL2 path by setting the AAL2PATHT parameter on the RNC side.
You can use the ADD TRMMAP command to configure the transmission resource mapping
table and specify the active path and standby path for each type of service. For example, you
can specify the active and standby paths for the AMR voice service by setting the
VOICEPRIPATH and VOICESECPATH parameters, respectively. The RNC provides a
default transmission resource mapping table.
When admitting a new call, the RNC preferentially uses the active path. When the active path
fails, the RNC tries to admit the new call on the standby path. For details, see Transmission
Resource Management Feature Parameter Description.
NOTE
If an AAL2 or IP path is unavailable, services carried on this path will be interrupted. A new service request
will be carried on an available path selected according to the information in the transmission resource
mapping table.
OM Plane
Configure the OM channel in ATM or IP transmission mode according to the network plan. For
details, see ATM Transport Feature Parameter Descriptin and IP Transmission Feature
Parameter Description, respectively.
If the OM channel works in active/standby mode (not recommended), two OM channels are
configured on the base station side. At the same time, you need to configure two IP addresses
of the base station on the U2000, one for the OM channel in ATM transmission and the other
for the OM channel in IP transmission.
If the IP data over the Iub interface is carried by the IP transmission pool, you need to set
the ISIPPOOL to YES on the RNC side.
For information about the protocol stack of ATM transmission, see ATM Transport Feature
Parameter Description.
For information about the protocol stack of IP transmission, see IP Transmission Feature
Parameter Description.
For detailed configurations, see BSC6900 UMTS Initial Configuration Guide (or BSC6910
UMTS Initial Configuration Guide) and 3900 Series Base Station Initial Configuration Guide.
Issue Draft A (2014-01-20)
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
3 Networking
Networking
As the data services in the network are booming and the High Speed Packet Access (HSPA)
technique is widely applied, the demand for bandwidth over the Iub interface is growing. A
single ATM network can provide high QoS but with high transmission costs, while an IP network
is effective in reducing transmission costs. To combine their advantages, the ATM&IP dualstack transmission over the Iub interface is introduced so that services with different QoS
requirements can be transmitted on different networks.
Figure 3-1 shows the networking in Iub over ATM&IP.
Figure 3-1 Networking in Iub over ATM&IP
As shown in Figure 3-1, the ATM network and IP network can carry services with different
QoS requirements.
l
High-QoS ATM network: carries voice services, streaming services, and signaling.
Low-QoS IP network: carries services with low QoS requirements, such as PS best effort
(BE) services.
In an actual network, both the RNC and NodeB must be configured with ATM interface boards
for connecting to the ATM network and IP interface boards for connecting to the IP network.
In Iub over ATM&IP, the ATM network can guarantee QoS while the IP network can reduce
transmission costs and provide high bandwidth for high-speed services over the Iub interface.
However, maintaining the ATM network and IP network simultaneously is more complex and
expensive.
In addition to the preceding non-transmission-resource mode, the BSC6900 can also use the
transmission resource pool mode in Iub over ATM&IP. For details, see Transmission Resource
Pool in RNC Feature Parameter Description.
Issue Draft A (2014-01-20)
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
3 Networking
The BSC6910 must use the transmission resource pool mode in Iub over ATM&IP. For details,
see Transmission Resource Pool in RNC Feature Parameter Description.
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
4 Related Features
Related Features
Impacted Features
None
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
5 Network Impact
Network Impact
Network Performance
No impact.
10
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
6 Engineering Guidelines
Engineering Guidelines
Physical layer data: port and VLAN configuration of the peer equipment.
Transport layer data: IP addresses, maximum transmission units (MTUs), and differentiated
services code points (DSCPs) of the peer equipment and next-hop equipment. To deploy
ATM transmission, the permanent virtual channel (PVC), AAL2 configuration, and AAL5
configuration of the peer equipment are necessary.
Data Link layer data: Stream Control Transmission Protocol (SCTP) link configuration on
the peer equipment.
6.1.3 Planning
Hardware Planning
l
The following boards of the BSC6900 support this feature: UOIa/UOIc, AOUa/
AOUcAEUa, FG2a/FG2c, and GOUa/GOUc.
The following boards of the BSC6910 support this feature: UOIc, AOUc, GOUc, XOUa,
and FG2c.
11
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
6 Engineering Guidelines
The following boards of the BTS3900 support this feature: WMPT, UMPT, UTRP2,
UTRP3, UTRP4, UTRP9, and UTRPc.
6.1.4 Deployment
Deployment Process
Figure 6-1 shows the deployment process on the RNC side.
Figure 6-1 Deployment process of Iub over ATM&IP on the RNC side
NOTE
The process shown in Figure 6-1 applies to ATM transmission deployment on the RNC side. For
information about deploying IP transmission on the BSC6900, see IP RAN Engineering Guide. For
information about deploying IP transmission on the BSC6910, see Transmission Resource Pool in RNC
Feature Parameter Description.
12
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
6 Engineering Guidelines
NOTE
The process shown in Figure 6-2 applies to ATM transmission deployment on the NodeB side. For
information about deploying IP transmission on the NodeB side, see IP RAN Engineering Guide.
Requirements
l
Other Features
This feature depends on the following features:
WRFD-050402 IP Transmission Introduction on Iub Interface
WRFD-150243 Iub IP Transmission Based on Dynamic Load Balancing
License
The license control item IUB ATM/IP Dual Stack Transportation Function has been
activated on the RNC side. For details about how to activate a license and descriptions
about license control items, see License Management Feature Parameter Description.
13
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
6 Engineering Guidelines
Feature ID
Feature
Name
License
Control Item
NE
Sales Unit
WRFD-05040
4
ATM/IP Dual
Stack NodeB
IUB ATM/IP
Dual Stack
Transportation
Function
RNC
Erl+Mbps
Others
The ATM and IP transmission links from the RNC to the NodeB have been established.
Data Preparation
For data preparation on the RNC side, see section "Data Preparation for Initial Configuration"
in BSC6900 UMTS Initial Configuration Guide (MML-Based) or BSC6900 UMTS Initial
Configuration Guide (MML-Based).
For data preparation on the NodeB side, see section "NodeB Transport Data" in 3900 Series
Base Station Initial Configuration Guide.
Initial Configuration
l
For details about activation using MML commands on the RNC side, see Configuring the
Interfaces > Configuring the Iub Interface (in ATM/IP Dual Stack Mode) in BSC6900
UMTS Initial Configuration Guide (MML-Based) or BSC6910 UMTS Initial Configuration
Guide (MML-Based). For details about activation using the CME on the RNC side, see
Configuring BSC6900 Data (General Configuration) > Configuring Interface Data in
BSC6900 UMTS Initial Configuration (CME-based) or BSC6910 UMTS Initial
Configuration (CME-based).
For details about activation on the NodeB side, see 3900 Series Base Station Initial
Configuration (CME-based) > Creating Base Stations > Creating NodeBs > Creating
a Single NodeB > Configuring NodeB Transport Data > Configuring Physical NodeB
Transport Data (Non-Secure Networking) in 3900 Series Base Station Initial
Configuration Guide.
Activation Observation
l
14
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
6 Engineering Guidelines
Step 3 Run the BSC6900 MML command DSP AAL2PATH to check the status of the AAL2 path and
whether any resources of the path are occupied.
Expected result: The command output shows that the value of the Operation state parameter
is Available and the values of the Used forward bandwidth of path and Used backward
bandwidth of path parameters are not 0.
Step 4 Run the BSC6900/BSC6910 MML command DSP SCTPLNK to check whether the SCTP link
is available.
Expected result: The command output shows that the value of the Operation state parameter
is Available.
Step 5 Run the BSC6900/BSC6910 MML command DSP SAALLNK to check whether the SAAL
link is available.
Expected result: The command output shows that the value of the Operation state parameter
is Available.
Step 6 (Optional) Start a Cell Trace task on the BSC6900/BSC6910 LMT. On the FMR tab, select
Transport Data Periodic Report and specify SCCPCH ID and Report Period of the cell to
be traced.
Expected result: On the Results of cell message tracing window, Trace Type is IP Interface
Trace.
Step 7 (Optional) Start an Iub Interface Trace task on the BSC6900/BSC6910 LMT. On the Basic
tab page, select SCTP, SAAL, and QAAL2. On the SAAL tab page, specify SAAL Link No.
On the SCTP tab page, specify SCTP Link No and select SCTP Message.
Expected result: On the Results of Tracing Messages on the Iub Interface window, Trace
Type is QAAL2 Message Trace and SCTP Message Trace.
----End
Table 6-1 lists the counters related to ATM&IP dual-stack transmission over the Iub interface
on the RNC side.
Table 6-1 Counters related to ATM&IP dual-stack transmission over the Iub interface on the
RNC side (BSC6900)
Counter ID
Counter Name
Counter Description
67191612
VS.SCTP.RX.PKGNUM
T6003:Number of IP Packets
Received on the SCTP Link
67191613
VS.SCTP.TX.PKGNUM
T6004:Number of IP Packets
Transmitted on the SCTP
Link
67194773
VS.SAALLNK.PVCLAYE
R.RXBYTES
15
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
6 Engineering Guidelines
Counter ID
Counter Name
Counter Description
67194771
VS.SAALLNK.PVCLAYE
R.TXBYTES
Number of Bytes
Transmitted on an SAAL
Link ATM Layer
67195399
VS.IPPATH.IPLAYER.RX
PACKETS
T7405:Number of Packets
Received at the IP Layer of an
IP Path
67195395
VS.IPPATH.IPLAYER.TX
PACKETS
T7401:Number of Packets
Transmitted at the IP Layer
of an IP Path
67194097
VS.AAL2PATH.PVCLAYE
R.RXCORRECTCELLS
67194100
VS.AAL2PATH.PVCLAYE
R.TXCORRECTCELLS
67194343
VS.ELECT.RXFLOWCAPACITY
T7037:Traffic Received on
the E1/T1 Electronical Port
67194344
VS.ELECT.TXFLOWCAPACITY
T7038:Traffic Transmitted
on the E1/T1 Electronical
Port
67204395
VS.FEGE.RXPACKETS
T7107:Number of frames
Received on the FEGE
Ethernet Port
67204396
VS.FEGE.TXPACKETS
T7110:Number of frames
Transmitted on the FEGE
Ethernet Port
NOTE
For counters related to ATM&IP dual-stack transmission over the Iub interface on the BSC6910, see
Transmission Resource Pool in RNC Feature Parameter Description.
Step 1 Run the NodeB MML command DSP ETHPORT to check the Ethernet physical port status.
Step 2 Run the NodeB MML command DSP AAL2PATH to check whether the AAL2 path is available.
Step 3 Run the NodeB MML command DSP SAALLNK to check whether the SAAL link is available.
Step 4 Run the NodeB MML command DSP SCTPLNK to check whether the SCTP link is available.
Step 5 (Optional) Start the Iub Interface Trace, MAC Message Statistics and PPP Message
Statistics tasks on the NodeB LMT.
Issue Draft A (2014-01-20)
16
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
6 Engineering Guidelines
Expected result: There are traced messages. Services are carried on the SCTP link, Ethernet port,
and IP path.
----End
Table 6-2 lists the counters related to ATM&IP dual-stack transmission over the Iub interface
on the NodeB side.
Table 6-2 Counters related to ATM&IP dual-stack transmission over the Iub interface on the
NodeB side
Counter ID
Counter Name
Counter Description
1542455874
VS.IPPath.TxPkts
Number of packets
successfully transmitted on
the IP path
1542455877
VS.IPPath.RxPkts
Number of packets
successfully received on the
IP path
1542455424
VS.Sctp.RxPkts
Number of IP packets
received on the SCTP
1542455425
VS.Sctp.TxPkts
Number of IP packets
transmitted on the SCTP
1542455298
VS.FEGE.TxPackets
Number of packets
successfully transmitted on
the Ethernet port
1542455300
VS.FEGE.RxPackets
Number of packets
successfully transmitted on
the Ethernet port
1542455884
VS.AAL2PATH.RxPkts
Number of packets
successfully received on the
AAL2 Path
1542455885
VS.AAL2PATH.TxPkts
Number of packets
successfully transmitted on
the AAL2 Path
1542455888
VS.SAALAAL5.RxPkts
1542455889
VS.SAALAAL5.TxPkts
Number of packets
transmitted on the SAAL
AAL5 link
1542455902
VS.IMAGRP.TxCells
1542455903
VS.IMAGRP.RxCells
17
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
6 Engineering Guidelines
Reconfiguration
For detailed operations, see RAN Reconfiguration Guide.
Deactivation
This feature does not need to be deactivated.
6.1.6 Troubleshooting
For details about troubleshooting on the RNC side, see section "Troubleshooting ATM
Transmission Faults" and "Troubleshooting IP Transmission Faults" in RAN Troubleshooting
Guide. For details about alarm handling procedures on the RNC side, see section "Transport
Alarm" in BSC6900 UMTS Alarm Reference or BSC6910 UMTS Alarm Reference.
Table 6-3 lists the alarms on the NodeB side.
Table 6-3 Alarms on the NodeB side
Alarm ID
Alarm Name
ALM-25820
ALM-25821
ALM-25823
ALM-25824
ALM-25825
ALM-25826
ALM-25827
ALM-25828
ALM-25829
ALM-25830
ALM-25831
ALM-25832
18
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
6 Engineering Guidelines
Alarm ID
Alarm Name
ALM-25833
ALM-25834
ALM-25835
NCP Fault
ALM-25836
CCP Fault
ALM-25837
ALCAP Fault
ALM-25838
ALM-25840
ALM-25841
ALM-25920
ALM-25921
ALM-25922
ALM-25923
ALM-25924
ALM-25925
ALM-25926
ALM-25927
ALM-25928
ALM-25929
ALM-25930
ALM-25931
ALM-25932
ALM-25933
ALM-25934
ALM-25935
ALM-25936
ALM-25937
ALM-25938
ALM-26220
ALM-26221
19
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
6 Engineering Guidelines
Alarm ID
Alarm Name
ALM-25800
ALM-25801
ALM-25802
ALM-25803
ALM-25804
ALM-25805
ALM-25806
ALM-25807
E1/T1 Loopback
ALM-25879
ALM-25880
ALM-25885
IP Address Conflict
ALM-25886
IP Path Fault
ALM-25888
ALM-25889
ALM-25897
ALM-25898
ALM-25901
20
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameters
NE
MML
Command
Feature ID
CARRYLNKT
BSC6900
ADD UNCP
WRFD-050402
WRFD-050404
MOD UNCP
Feature Name
Description
Meaning:When
the NCP/CCP is
based on ATM,
set Bearing link
type to SAAL.
When the NCP/
CCP is based on
IP, set Bearing
link type to
SCTP. When the
NCP/CCP is
based on ATM/
IP, set Bearing
link type to
SAAL-SCTP.
For detailed
information of
this parameter,
see 3GPP TS
25.430.
GUI Value
Range:SAAL
(SAAL Link
Type), SCTP
(SCTP Link
Type), SAALSCTP(SAALSCTP Link
Type)
Unit:None
21
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Actual Value
Range:SAAL,
SCTP, SAALSCTP
Default
Value:None
CARRYLNKT
BSC6900
ADD UCCP
MOD UCCP
WRFD-050402
WRFD-050404
Meaning:When
the NCP/CCP is
based on ATM,
set Bearing link
type to SAAL.
When the NCP/
CCP is based on
IP, set Bearing
link type to
SCTP. When the
NCP/CCP is
based on ATM/
IP, set Bearing
link type to
SAAL-SCTP.
For detailed
information of
this parameter,
see 3GPP TS
25.430.
GUI Value
Range:SAAL
(SAAL Link
Type), SCTP
(SCTP Link
Type), SAALSCTP(SAALSCTP Link
Type)
Unit:None
Actual Value
Range:SAAL,
SCTP, SAALSCTP
Default
Value:None
22
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
MAINLINK
BSC6900
ADD UCCP
WRFD-050404
ATM/IP Dual
Stack Node B
MOD UCCP
GUI Value
Range:SAAL
(SAAL Link
Type ), SCTP
(SCTP Link
Type)
Unit:None
Actual Value
Range:SAAL,
SCTP
Default
Value:SAAL
(SAAL Link
Type )
23
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
MAINLINK
BSC6900
ADD UNCP
WRFD-050404
ATM/IP Dual
Stack Node B
MOD UNCP
GUI Value
Range:SAAL
(SAAL Link
Type ), SCTP
(SCTP Link
Type)
Unit:None
Actual Value
Range:SAAL,
SCTP
Default
Value:SAAL
(SAAL Link
Type )
24
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
BELONG
BTS3900,
BTS3900
WCDMA
ADD IUBCP
None
None
DSP IUBCP
RMV IUBCP
LST IUBCP
GUI Value
Range:MASTE
R(MASTER),
SLAVE
(SLAVE)
Unit:None
Actual Value
Range:MASTE
R, SLAVE
Default
Value:MASTE
R(MASTER)
25
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
PATHT
BSC6900
ADD IPPATH
WRFD-020111
One Tunnel
WRFD-050402
IP Transmission
Introduction on
Iub Interface
Meaning:This
parameter
specifies the
type of an IP
path. It indicates
the priority of
the user plane
data that is
carried on the IP
path. The
mapping
between the
priority of the
user plane data
and IP path is
configured
through the
"ADD
TRMMAP"
command. An IP
path is of either
the QoS type or
the non-QoS
type. For
example, the IP
paths used to
carry BE data,
AF data, and EF
data are all of the
non-QoS type.
Different data
can share the
bandwidth of a
QoS-type IP
path. The
bandwidth of a
non-QoS type IP
path, however,
cannot be
shared. IP path
in hybrid IP
transmission can
be further
categorized into
high-priority IP
path and lowpriority IP path
(identified as
WRFD-050403
WRFD-050404
WRFD-050409
Hybrid Iub IP
Transmission
ATM/IP Dual
Stack Node B
IP Transmission
Introduction on
Iu Interface
26
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
LQ_xx). When
the bearing type
of the physical
port is PPP or
MP, the IP path
is recommended
to be configured
as a highpriority path.
When the
physical port is
an Ethernet port,
the IP path is
recommended to
be configured as
a low-priority
path. For the
non-QoS type IP
path, the priority
of EF data is
higher than that
of AF data,
which in turn is
higher than that
of BE data. The
actual priority of
user plane data,
however, is set
through the
"SET
PHBMAP"
command.
GUI Value
Range:BE(BE),
AF11(AF11),
AF12(AF12),
AF13(AF13),
AF21(AF21),
AF22(AF22),
AF23(AF23),
AF31(AF31),
AF32(AF32),
AF33(AF33),
AF41(AF41),
AF42(AF42),
AF43(AF43),
EF(EF), QoS
27
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
(QoS), LQ_BE
(LQ_BE),
LQ_AF11
(LQ_AF11),
LQ_AF12
(LQ_AF12),
LQ_AF13
(LQ_AF13),
LQ_AF21
(LQ_AF21),
LQ_AF22
(LQ_AF22),
LQ_AF23
(LQ_AF23),
LQ_AF31
(LQ_AF31),
LQ_AF32
(LQ_AF32),
LQ_AF33
(LQ_AF33),
LQ_AF41
(LQ_AF41),
LQ_AF42
(LQ_AF42),
LQ_AF43
(LQ_AF43),
LQ_EF
(LQ_EF),
LQ_QOS
(LQ_QOS)
Unit:None
Actual Value
Range:QoS, BE,
AF11, AF12,
AF13, AF21,
AF22, AF23,
AF31, AF32,
AF33, AF41,
AF42, AF43,
EF, LQ_QOS,
LQ_BE,
LQ_AF11,
LQ_AF12,
LQ_AF13,
LQ_AF21,
LQ_AF22,
LQ_AF23,
28
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
LQ_AF31,
LQ_AF32,
LQ_AF33,
LQ_AF41,
LQ_AF42,
LQ_AF43,
LQ_EF
Default
Value:None
AAL2PATHT
BSC6900
ADD
AAL2PATH
WRFD-021305
01
MOD
AAL2PATH
WRFD-050301
04
Dedicated Iub
Transmission
Control
Dynamic AAL2
Connections in
Iub/IuCS/Iur
Interface
Meaning:Servic
e type of carried
over the PATH.
For R99, only
the R99 service
can be carried.
For HSPA, only
the HSPA
service can be
carried. For
SHARE, R99
and HSPA
services can be
carried at the
same time.
GUI Value
Range:R99
(R99), HSPA
(HSPA),
SHARE
(SHARE)
Unit:None
Actual Value
Range:R99,
HSPA, SHARE
Default
Value:None
29
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
AAL2PATHT
BSC6910
ADD
AAL2PATH
WRFD-021305
01
MOD
AAL2PATH
WRFD-050301
04
Dedicated Iub
Transmission
Control
Meaning:Servic
e type of carried
over the PATH.
For R99, only
the R99 service
can be carried.
For HSPA, only
the HSPA
service can be
carried. For
SHARE, R99
and HSPA
services can be
carried at the
same time.
Dynamic AAL2
Connections in
Iub/IuCS/Iur
Interface
GUI Value
Range:R99
(R99), HSPA
(HSPA),
SHARE
(SHARE)
Unit:None
Actual Value
Range:R99,
HSPA, SHARE
Default
Value:None
30
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
VOICEPRIPAT
H
BSC6900
ADD
TRMMAP
WRFD-050406
ATM QoS
Introduction on
Hub Node B
(Overbooking
on Hub Node B
Transmission)
Meaning:AMR
voice service
bearer primary
path.
MOD
TRMMAP
GUI Value
Range:CBR,
RT_VBR,
NRT_VBR,
UBR, BE,
AF11, AF12,
AF13, AF21,
AF22, AF23,
AF31, AF32,
AF33, AF41,
AF42, AF43,
EF, LQBE,
LQAF11,
LQAF12,
LQAF13,
LQAF21,
LQAF22,
LQAF23,
LQAF31,
LQAF32,
LQAF33,
LQAF41,
LQAF42,
LQAF43, LQEF
Unit:None
Actual Value
Range:CBR,
RT_VBR,
NRT_VBR,
UBR, BE,
AF11, AF12,
AF13, AF21,
AF22, AF23,
AF31, AF32,
AF33, AF41,
AF42, AF43,
EF, LQBE,
LQAF11,
LQAF12,
LQAF13,
LQAF21,
LQAF22,
LQAF23,
31
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
LQAF31,
LQAF32,
LQAF33,
LQAF41,
LQAF42,
LQAF43, LQEF
Default
Value:None
32
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
VOICESECPA
TH
BSC6900
ADD
TRMMAP
WRFD-050406
ATM QoS
Introduction on
Hub Node B
(Overbooking
on Hub Node B
Transmission)
Meaning:AMR
voice service
bearer
secondary path.
MOD
TRMMAP
GUI Value
Range:CBR,
RT_VBR,
NRT_VBR,
UBR, BE,
AF11, AF12,
AF13, AF21,
AF22, AF23,
AF31, AF32,
AF33, AF41,
AF42, AF43,
EF, LQBE,
LQAF11,
LQAF12,
LQAF13,
LQAF21,
LQAF22,
LQAF23,
LQAF31,
LQAF32,
LQAF33,
LQAF41,
LQAF42,
LQAF43,
LQEF, NULL
Unit:None
Actual Value
Range:CBR,
RT_VBR,
NRT_VBR,
UBR, BE,
AF11, AF12,
AF13, AF21,
AF22, AF23,
AF31, AF32,
AF33, AF41,
AF42, AF43,
EF, LQBE,
LQAF11,
LQAF12,
LQAF13,
LQAF21,
LQAF22,
33
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
LQAF23,
LQAF31,
LQAF32,
LQAF33,
LQAF41,
LQAF42,
LQAF43,
LQEF, NULL
Default
Value:None
TnlBearerType
BSC6900
ADD UNODEB
MOD
UNODEB
WRFD-050402
IP Transmission
Introduction on
Iub Interface
34
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
TnlBearerType
BSC6910
ADD UNODEB
None
None
MOD
UNODEB
GUI Value
Range:ATM_T
RANS(ATM
circuit
transmission),
IP_TRANS(IP
transmission),
ATMANDIP_T
RANS(ATM
and IP
transmission)
Unit:None
Actual Value
Range:ATM_T
RANS,
IP_TRANS,
ATMANDIP_T
RANS
Default
Value:ATM_T
RANS(ATM
circuit
transmission)
35
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
NODET
BSC6900
ADD
ADJNODE
WRFD-050403
Hybrid Iub IP
Transmission
MOD
ADJNODE
WRFD-020111
Meaning:Type
of the adjacent
node.
WRFD-050404
WRFD-150211
WRFD-021305
01
WRFD-050301
04
WRFD-140207
WRFD-140208
WRFD-150212
ATM/IP Dual
Stack Node B
One Tunnel
RNC in Pool
Load Sharing
Dedicated Iub
Transmission
Control
Dynamic AAL2
Connections in
Iub/IuCS/Iur
Interface
Iu/Iur
Transmission
Resource Pool
in RNC
Iub
Transmission
Resource Pool
in RNC
RNC in Pool
Node
Redundancy
GUI Value
Range:IUB(Iub
Interface), IUR
(Iur Interface),
IUCS(Iu-CS
Interface), IUPS
(Iu-PS
Interface),
UNI_AAL2SW
ITCH(the
adjacent node of
the ATM switch
on the Iub
interface),
NNI_AAL2SW
ITCH(the
adjacent node of
ATM switch on
Iur or Iu-CS
interface), IURP
(Iurp Interface)
Unit:None
Actual Value
Range:IUB,
IUR, IUCS,
IUPS,
UNI_AAL2SW
ITCH,
NNI_AAL2SW
ITCH, IURP
Default
Value:None
36
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
NODET
BSC6910
ADD
ADJNODE
WRFD-150212
MOD
ADJNODE
WRFD-150244
RNC in Pool
Node
Redundancy
Meaning:Type
of the adjacent
node.
RNC in Pool
Load Sharing
GUI Value
Range:IUB(Iub
Interface), IUR
(Iur Interface),
IUCS(Iu-CS
Interface), IUPS
(Iu-PS
Interface),
UNI_AAL2SW
ITCH(the
adjacent node of
the ATM switch
on the Iub
interface),
NNI_AAL2SW
ITCH(the
adjacent node of
ATM switch on
Iur or Iu-CS
interface), IURP
(Iurp Interface),
SE(SE
Interface)
WRFD-150211
WRFD-050301
04
WRFD-150243
WRFD-020111
Iu/Iur IP
Transmission
Based on
Dynamic Load
Balance
Dynamic AAL2
Connections in
Iub/IuCS/Iur
Interface
Iub IP
Transmission
Based on
Dynamic Load
Balance
One Tunnel
Unit:None
Actual Value
Range:IUB,
IUR, IUCS,
IUPS,
UNI_AAL2SW
ITCH,
NNI_AAL2SW
ITCH, IURP, SE
Default
Value:None
37
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
TRANST
BSC6900
ADD
ADJNODE
WRFD-050403
WRFD-050404
Hybrid Iub IP
Transmission
Meaning:Transport type.
MOD
ADJNODE
WRFD-021305
01
ATM/IP Dual
Stack Node B
WRFD-050301
04
Dedicated Iub
Transmission
Control
GUI Value
Range:ATM
(ATM), IP(IP),
ATM_IP(ATM
and IP),
HYBRID_IP
(HYBRID IP)
WRFD-140207
WRFD-140208
WRFD-020111
Dynamic AAL2
Connections in
Iub/IuCS/Iur
Interface
Iu/Iur
Transmission
Resource Pool
in RNC
Iub
Transmission
Resource Pool
in RNC
Unit:None
Actual Value
Range:ATM, IP,
ATM_IP,
HYBRID_IP
Default
Value:None
One Tunnel
TRANST
BSC6910
ADD
ADJNODE
MOD
ADJNODE
WRFD-050404
WRFD-050301
04
WRFD-020111
WRFD-021305
01
ATM/IP Dual
Stack Node B
Meaning:Transport type.
Dynamic AAL2
Connections in
Iub/IuCS/Iur
Interface
GUI Value
Range:ATM
(ATM), IP(IP),
ATM_IP(ATM
and IP)
One Tunnel
Dedicated Iub
Transmission
Control
Unit:None
Actual Value
Range:ATM, IP,
ATM_IP
Default
Value:None
38
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
ISIPPOOL
BSC6900
ADD
ADJNODE
WRFD-050412
MOD
ADJNODE
WRFD-050410
Meaning:Wheth
er the
networking
mode of the
interface boards
of the RNC
connected to this
adjacent node is
IP POOL. If this
mode is
selected, load
will be shared
among boards in
the pool. When
the capacity of
the peer NEs is
expanded, the
RNC requires no
configuration
modification.
When the
transmission
capacity is
expanded, base
stations do not
need to be
swapped and
services will not
be interrupted.
WRFD-050402
WRFD-050409
WRFD-140207
WRFD-140208
WRFD-050420
IP Transmission
Introduction on
Iub Interface
IP Transmission
Introduction on
Iur Interface
IP Transmission
Introduction on
Iu Interface
Iu/Iur
Transmission
Resource Pool
in RNC
Iub
Transmission
Resource Pool
in RNC
FP MUX for IP
Transmission
GUI Value
Range:NO(No),
YES(Yes)
Unit:None
Actual Value
Range:NO, YES
Default
Value:NO(No)
39
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counters
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67192414
VS.IPPART.No
de.Conn.Modify
.Succ
Number of
Successful IP
Connection
Modifications
Initiated by the
Transport Layer
on the DualStack Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67192415
VS.IPPART.No
de.Conn.Rel
Number of IP
Connection
Release
Requests Sent
from the Radio
Network Layer
to the Transport
Layer on the
Dual-Stack
Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67192422
VS.QAAL2IP.
AttResAlloc
Number of
Resource
Requests Sent
from the Radio
Network Layer
to the Transport
Layer on DualStack Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
40
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67192423
VS.QAAL2IP.S
uccResAlloc
Number of
Successful
Resource
Allocations
After the
Transport Layer
Receives the
Resource
Requests from
the Radio
Network Layer
on Dual-Stack
Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67192424
VS.QAAL2PA
RT.Est.RLC.No
Route.Rx
Number of
AAL2
Connection
Release
Confirmations
Received by
QAAL2 on
Dual-Stack
Adjacent Node
Due to No Route
at the Remote
End
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67192425
VS.QAAL2PA
RT.Est.RLC.No
Path.Rx
Number of
AAL2
Connection
Release
Confirmations
Received by
QAAL2 on
Dual-Stack
Adjacent Node
Due to No Path
path Configured
at the Remote
End
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
41
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67192446
VS.QAAL2PA
RT.RxModRej
Number of
Modification
Rejection
(MOR)
Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2 Sends
Connection
Modification
Request (MOD)
Messages
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67192447
VS.QAAL2PA
RT.TxModRej
Number of
MOR Messages
Sent by QAAL2
on the DualStack Adjacent
Node After the
QAAL2
Receives
Connection
MOD Messages
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67192448
VS.QAAL2PA
RT.TxMod
Number of
MOD Messages
Sent by QAAL2
on Dual-Stack
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67192449
VS.QAAL2PA
RT.RxMod
Number of
MOD Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
42
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194611
VS.QAAL2PA
RT.Est.RLC.No
CID.Rx
Number of
AAL2
Connection
Release
Confirmations
Received by
QAAL2 on
Dual-Stack
Adjacent Node
Due to No CID
Available at the
Remote End
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194620
VS.QAAL2PA
RT.Est.ECF.Tx
Number of
Connection ECF
Messages Sent
by QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2
Receives the
Connection
ERQ Message
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194621
VS.QAAL2PA
RT.Est.RLC.Tx
Number of RLC
Messages Sent
by QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2
Receives the
Connection
ERQ Message
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194622
VS.QAAL2PA
RT.Rel.Tx
Number of
Connection
Release (REL)
Messages Sent
by QAAL2 on
Dual-Stack
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
43
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194623
VS.QAAL2PA
RT.Rel.Rx
Number of
Connection
REL Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194626
VS.QAAL2PA
RT.Est.RLC.Co
ng.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to Switch
Congestion
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194627
VS.QAAL2PA
RT.Est.RLC.Re
covOut.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to Timer
Expiry
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194628
VS.QAAL2PA
RT.ERQ.Tx
Number of
Connection
Establishment
Request (ERQ)
Messages Sent
by QAAL2 on
Dual-Stack
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194629
VS.QAAL2PA
RT.ERQ.Rx
Number of
Connection
Establishment
Requests
Received by
QAAL2 on the
Dual-Stack
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
44
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194630
VS.QAAL2PA
RT.Est.RLC.Rx
Number of RLC
Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2 Sends
the Connection
ERQ Messages
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194631
VS.QAAL2PA
RT.Est.ECF.Rx
Number of ECF
Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2 Sends
the Connection
ERQ Messages
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194632
VS.QAAL2PA
RT.Rel.RLC.Rx
Number of RLC
Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2 Sends
REL Messages
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194633
VS.QAAL2PA
RT.Rel.RLC.Tx
Number of RLC
Messages Sent
by QAAL2 on
the Dual-Stack
Adjacent Node
After the
QAAL2
Receives
Connection
REL Messages
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
45
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194658
VS.IPPART.No
de.Conn.Estab.
Att
Number of
Connection
Setup Requests
for IP Transport
from the
Transport Layer
to the Radio
Network Layer
on the DualStack Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194659
VS.IPPART.No
de.Conn.Estab.
Succ
Number of
Successful IP
Connection
Setups Initiated
by the Transport
Layer on the
Dual-Stack
Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194660
VS.IPPART.No
de.Conn.Modify
.Att
Number of IP
Connection
Modifications
on the DualStack Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194661
VS.QAAL2PA
RT.Est.RLC.Co
ng.Rx
Number of
AAL2
Connection
Release
Confirmations
Received by
QAAL2 on
Dual-Stack
Adjacent Node
Due to Switch
Congestion at
the Remote End
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
46
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194662
VS.QAAL2PA
RT.Est.RLC.Re
covOut.Rx
Number of
AAL2
Connection
Release
Confirmations
Received by
QAAL2 on
Dual-Stack
Adjacent Node
Due to Timer
Expiry at the
Remote End
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194663
VS.QAAL2PA
RT.Est.RLC.No
Route.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to No Route
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194664
VS.QAAL2PA
RT.Est.RLC.No
Path.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to No Path
Configured
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67194665
VS.QAAL2PA
RT.Est.RLC.No
CID.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to No CID
Available
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
47
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194666
VS.QAAL2PA
RT.Est.RLC.Fai
l.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to Network
Failure,
Unspecified
Reason, or
Temporary
Failure
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67196160
VS.QAAL2IP.F
ailResAllocForBwLimit
Number of
Failed Resource
Allocations Due
to Insufficient
Bandwidth on
the Dual-Stack
Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67196185
VS.QAAL2PA
RT.Est.RLC.No
BitRate.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to No
Bandwidth
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67204200
VS.IPPART.No
de.Act.Con
Mean Number
of Active IP
Connections to a
Dual-Stack
Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67204201
VS.IPPART.All
ocedFwd
Forward
Bandwidth of IP
Path Allocated
to a Dual-Stack
Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
48
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67204202
VS.IPPART.All
ocedBwd
Backward
Bandwidth of IP
Path Allocated
to a Dual-Stack
Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67204203
VS.QAAL2PA
RT.Act.Con
Number of
Active AAL2
Connections to a
Dual-Stack
Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67204204
VS.QAAL2PA
RT.AllocedFwd
.AAL2BitRate
Mean Forward
Bandwidth of
AAL2 Path
Allocated to a
Dual-Stack
Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67204205
VS.QAAL2PA
RT.AllocedBwd
.AAL2BitRate
Mean Backward
Bandwidth of
AAL2 Path
Allocated to a
Dual-Stack
Transport
Adjacent Node
BSC6900
WRFD-050404
ATM/IP Dual
Stack Node B
67192414
VS.IPPART.No
de.Conn.Modify
.Succ
Number of
Successful IP
Connection
Modifications
Initiated by the
Transport Layer
on the DualStack Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
49
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67192415
VS.IPPART.No
de.Conn.Rel
Number of IP
Connection
Release
Requests Sent
from the Radio
Network Layer
to the Transport
Layer on the
Dual-Stack
Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67192422
VS.QAAL2IP.
AttResAlloc
Number of
Resource
Requests Sent
from the Radio
Network Layer
to the Transport
Layer on DualStack Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67192423
VS.QAAL2IP.S
uccResAlloc
Number of
Successful
Resource
Allocations
After the
Transport Layer
Receives the
Resource
Requests from
the Radio
Network Layer
on Dual-Stack
Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67192424
VS.QAAL2PA
RT.Est.RLC.No
Route.Rx
Number of
AAL2
Connection
Release
Confirmations
Received by
QAAL2 on
Dual-Stack
Adjacent Node
Due to No Route
at the Remote
End
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
50
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67192425
VS.QAAL2PA
RT.Est.RLC.No
Path.Rx
Number of
AAL2
Connection
Release
Confirmations
Received by
QAAL2 on
Dual-Stack
Adjacent Node
Due to No Path
path Configured
at the Remote
End
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67192446
VS.QAAL2PA
RT.RxModRej
Number of
Modification
Rejection
(MOR)
Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2 Sends
Connection
Modification
Request (MOD)
Messages
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67192447
VS.QAAL2PA
RT.TxModRej
Number of
MOR Messages
Sent by QAAL2
on the DualStack Adjacent
Node After the
QAAL2
Receives
Connection
MOD Messages
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67192448
VS.QAAL2PA
RT.TxMod
Number of
MOD Messages
Sent by QAAL2
on Dual-Stack
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
51
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67192449
VS.QAAL2PA
RT.RxMod
Number of
MOD Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194611
VS.QAAL2PA
RT.Est.RLC.No
CID.Rx
Number of
AAL2
Connection
Release
Confirmations
Received by
QAAL2 on
Dual-Stack
Adjacent Node
Due to No CID
Available at the
Remote End
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194620
VS.QAAL2PA
RT.Est.ECF.Tx
Number of
Connection ECF
Messages Sent
by QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2
Receives the
Connection
ERQ Message
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194621
VS.QAAL2PA
RT.Est.RLC.Tx
Number of RLC
Messages Sent
by QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2
Receives the
Connection
ERQ Message
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
52
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194622
VS.QAAL2PA
RT.Rel.Tx
Number of
Connection
Release (REL)
Messages Sent
by QAAL2 on
Dual-Stack
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194623
VS.QAAL2PA
RT.Rel.Rx
Number of
Connection
REL Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194626
VS.QAAL2PA
RT.Est.RLC.Co
ng.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to Switch
Congestion
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194627
VS.QAAL2PA
RT.Est.RLC.Re
covOut.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to Timer
Expiry
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194628
VS.QAAL2PA
RT.ERQ.Tx
Number of
Connection
Establishment
Request (ERQ)
Messages Sent
by QAAL2 on
Dual-Stack
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
53
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194629
VS.QAAL2PA
RT.ERQ.Rx
Number of
Connection
Establishment
Requests
Received by
QAAL2 on the
Dual-Stack
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194630
VS.QAAL2PA
RT.Est.RLC.Rx
Number of RLC
Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2 Sends
the Connection
ERQ Messages
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194631
VS.QAAL2PA
RT.Est.ECF.Rx
Number of ECF
Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2 Sends
the Connection
ERQ Messages
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194632
VS.QAAL2PA
RT.Rel.RLC.Rx
Number of RLC
Messages
Received by
QAAL2 on
Dual-Stack
Adjacent Node
After the
QAAL2 Sends
REL Messages
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
54
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194633
VS.QAAL2PA
RT.Rel.RLC.Tx
Number of RLC
Messages Sent
by QAAL2 on
the Dual-Stack
Adjacent Node
After the
QAAL2
Receives
Connection
REL Messages
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194658
VS.IPPART.No
de.Conn.Estab.
Att
Number of
Connection
Setup Requests
for IP Transport
from the
Transport Layer
to the Radio
Network Layer
on the DualStack Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194659
VS.IPPART.No
de.Conn.Estab.
Succ
Number of
Successful IP
Connection
Setups Initiated
by the Transport
Layer on the
Dual-Stack
Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194660
VS.IPPART.No
de.Conn.Modify
.Att
Number of IP
Connection
Modifications
on the DualStack Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
55
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194661
VS.QAAL2PA
RT.Est.RLC.Co
ng.Rx
Number of
AAL2
Connection
Release
Confirmations
Received by
QAAL2 on
Dual-Stack
Adjacent Node
Due to Switch
Congestion at
the Remote End
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194662
VS.QAAL2PA
RT.Est.RLC.Re
covOut.Rx
Number of
AAL2
Connection
Release
Confirmations
Received by
QAAL2 on
Dual-Stack
Adjacent Node
Due to Timer
Expiry at the
Remote End
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194663
VS.QAAL2PA
RT.Est.RLC.No
Route.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to No Route
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194664
VS.QAAL2PA
RT.Est.RLC.No
Path.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to No Path
Configured
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
56
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67194665
VS.QAAL2PA
RT.Est.RLC.No
CID.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to No CID
Available
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67194666
VS.QAAL2PA
RT.Est.RLC.Fai
l.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to Network
Failure,
Unspecified
Reason, or
Temporary
Failure
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67196160
VS.QAAL2IP.F
ailResAllocForBwLimit
Number of
Failed Resource
Allocations Due
to Insufficient
Bandwidth on
the Dual-Stack
Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67196185
VS.QAAL2PA
RT.Est.RLC.No
BitRate.Tx
Number of
AAL2
Connection
Release
Confirmations
Sent by QAAL2
on Dual-Stack
Adjacent Node
Due to No
Bandwidth
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
57
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67204200
VS.IPPART.No
de.Act.Con
Mean Number
of Active IP
Connections to a
Dual-Stack
Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67204203
VS.QAAL2PA
RT.Act.Con
Number of
Active AAL2
Connections to a
Dual-Stack
Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67204204
VS.QAAL2PA
RT.AllocedFwd
.AAL2BitRate
Mean Forward
Bandwidth of
AAL2 Path
Allocated to a
Dual-Stack
Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
67204205
VS.QAAL2PA
RT.AllocedBwd
.AAL2BitRate
Mean Backward
Bandwidth of
AAL2 Path
Allocated to a
Dual-Stack
Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
73442018
VS.ANIQAAL2
.IPPART.AllocedFwd
Forward
Bandwidth of IP
Allocated to a
Dual-Stack
Transport
Adjacent Node
BSC6910
WRFD-050404
ATM/IP Dual
Stack Node B
VS.ANIQAAL2
.IPPART.AllocedBwd
Backward
Bandwidth of IP
Allocated to a
Dual-Stack
Transport
Adjacent Node
BSC6910
73442019
WRFD-150244
Iu/Iur IP
Transmission
Based on
Dynamic Load
Balancing
WRFD-050404
WRFD-150244
ATM/IP Dual
Stack Node B
Iu/Iur IP
Transmission
Based on
Dynamic Load
Balancing
58
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
9 Glossary
Glossary
59
WCDMA RAN
ATM&IP Dual Stack Feature Parameter Description
10
10 Reference Documents
Reference Documents
1.
2.
3.
4.
5.
6.
7.
8.
9.
60