Beruflich Dokumente
Kultur Dokumente
1_ENG
INTRODUCTION
CMS (Central Monitoring Software) is designed to control hundreds of local DVRs from the central
monitoring room.
CMS presents advanced features as follows to fulfill effective central monitoring.
1. Multi-screen monitoring(quadruple display.
2. Maximum 1,024Ch display in one screen.
3. 16 E-MAP monitoring
4. Event mapper: Special event caring WINDOWS
5. Remote Search, Backup and full menu setup
5. Dynamic IP support
6. Remote PTZ control
CONTENTS
INTERODUCTION2
1. PC REQUIREMENT...4
2. PROGRAM INSTALLATION...5
3. CMS LOG-IN....6
4. MAIN GUI...7
5. DVR REGISTRATION......8
6. DVR REGISTRATION, DELETE, MODIFICATION.......9
7. DVR REMOTE CONNECTION/ DISCONNECTION10
8. REGISTERED DVR LIST FUNCTION..11
9. MULTI-CHANNEL DISPLAY...,13
10. I FRAME STREAMING..,.,14
11. CLONE
.,,14
1. PC
REQUIREMENT
According to the PC specification and internet speed, the CMS function can be limited.
Minimum PC spec
Recommended PC spec
Pentium4 3GHz
Core2 Duo
Memory : 1G
Memory : 2G
HDD : 10G
HDD : 10G
DirectX 9.0C.
DirectX 9.0C.
[Notice]
CMS function updates may need the enhanced PC specification.
2. PROGRAM
INSTALLATION
The installation CD is enclosed in product carton box. You may download the updated version
in future upon request.
Execute the install.exe from the installation CD.
If the installation program start, execute the CMS Program. The language will be recognized
automatically. Install it as per the message
Read Me: Installation related explanation.
Quick Install ( Typical) : It installs all the program in CD as an order.
CMS Program : It installs the main CMS program.
MS Backup Viewer : It is for searching the CMS backup image.
Backup Viewer (FDS GP) : It installs the Backup Viewer program of GP series DVR.
Backup Viewer (FDS G ) : It installs the Backup Viewer program of G series DVR.
Backup Viewer (FDS M) : It installs the Backup Viewer program of M series DVR.
Backup Viewer (FDS) : It installs the Backup Viewer program of MAIUS series DVR.
Exit : It terminates the installation program.
If the installation is completed, you can see the icon from the main screen. Please use
the program after rebooting your PC.
3. CMS LOG-IN
If you click the CMS icon from the main screen on PC, below log-in window shows.
[1]
USER
PASSWORD
ADMIN PASSWORD
NNNN
AUTHORITY
All function on CMS is
possible to use
Except for the
configuration(menu) setup
PPPP
USER PASSWORD
UUUU
4. Main GUI
There are 9 control panel on main CMS screen.
5. DVR registration
If you execute it for the first time, no registered recording device. Do you want to register?
message comes up. If you click yes, DVR registration menu opens. If you want to register the
DVR after click NO, select the DVR INFO located on right-upper side.
STATIC IP USER
information.
FDS-1640GP/820GP : 2100 / FDS-410G/910G/1610G : 2000
DVR MODEL : If you select your DVR, DDNS IP, DDNS PORT is input automatically.
USE DDNS and DDNS ID doesnt have to be configured in STATIS IP setup.
When above process is finished, press the ADD DVR to complete the registration. Then, the
list shows up the DVR list located right side.
DYNAMIC IP USER
/ FDS-410G/910G/1610G : 2000
Once you modify the DVR information and click the SAVE DVR, the modified information is
saved.
Click the DELETE DVR from the below DVR information menu.
Select the DVR from the list and click the CONNECT icon.
10
DVR disconnection
If you want to disconnect, select the DVR list and click the DISCONNECT.
11
CHANNEL COVERT
If you click the camera icon, it turns to X and the camera image doesnt show up on CMS.
( It applies when it was re-connected)
It is nothing to do with the DVR unit but, it is concealing the image from the CMS itself.
12
9. MULTI-CHANNEL DISPLAY
For multi-channel displaying in one screen when many DVRs are connected, it supports multi
split channel display mode. It is optimized in WIDE monitor as well.
[1] MAX: It makes the live image to fully fit the current screen. ESC returns to previous.
[2] Split mode selection
The displaying and monitoring is possible as per the users request.
(Example) If you press 2 , it displays as squared so, it show 2X2 screen.
If you press 4 , it displays as squared so, it show 4X4 screen.
13
Select the split mode you want from the left-below menu.
14
[2] The connection can be made by the ADMIN password. Then, you will see the CLONE1. This
means the first clone so, if you click the CLONE again, CLONE2 is floating. If you disconnect and
connect again, and click the CLONE, the saved CLONE will be floated again.
15
12. AUTO
A
CON
N
Once yo
ou check the
e listed DVR and click th
he AUTO CON, all checke
ed DVR is co
onnected
automattically.( But, once the CM
MS is terminated, AUTO CON functio
on is release
ed )
13. SEQ
S
CON
ed DVR sequ
uence during
g the selecte
ed time.
It makess the selecte
Click the
e SEQ CON for working. If it workss, the color of button tu
urns blue.
HECK the DV
VR to be seq
quenced.
CH
Seq Con Nu
um : Select how
h
many DVR to show in one scree
en.
Seq Con Int : Select the duration off sequence.
16
[Notice]
SEQ CON works at least 2 DVRs are selected.
If you checked 3 DVRs, and selected Seq Con Num =1 , Seq Con Int=10, it shows
DEMO-1 DVR for 10seconds and sequencing to DEMO-2 and DEMO-3.
If you checked 3 DVRs, and selected Seq Con Num =2 , Seq Con Int=10, it shows
DEMO-1 and DEMO-2 in one screen for 10seconds and, sequencing to DEMO-3 and
DEMO-1.. DEMO-2 and DEMO-3..
If you click the SEQ CON, the sequencing starts and icon turns blue. If you click again, it
is released.
SINGLE MODE is needed when there is no multi-DVR connection. If you connect it based on
SINGLE MODE, the connection is automatically made as per the original DVR
split.(16Ch/9Ch/8Ch/4Ch).
17
EM displays the event information and image to the separate CMS screen. So, although there are
many DVRs are connected, you can easily catch the event information with this advanced
monitoring function.
For your applying the Event mapper function, double click the DVR list while pressing the
CTRL key. Then, it will ask whether you want to change the connection mode click YES.
If the Event mapper function applied to the relevant DVR, red E icon shows.
Please select the DVR to use the Event mapper function as per above selection way.
Once the Event mapper function selected DVR is connected, click EM for activating the
EVENT MAPPER screen.
[WARNING]
If you connect the DVR with Event mapper mode(EM), only WAITING DATA
could be shown. Its because if you select the DVR as EM mode, the image only
can be shown when there is real EVENT happen. So, EVENT MAPPER function has to
be used in proper way and purpose.
Since the user can see the EVENT IMAGE only from many images from many connected
DVRs, it gives you the effective monitoring.
18
Auto Scroll : If the new event happen, the list updates automatically.
If you want to search the certain image or event list, youd better to uncheck the Auto Scroll.
Update Item : The event list or image is not updated on the screen.
Write Log : It saves the event list as log file.
Write Image : It saves the event image automatically on the PC.
Since it occupies the HDD space on your PC, you have to be very careful when you use.
CONNECT LIVE : Once you select the LIST and click the CONNECT LIVE, it shows the
relevant DVR screen.
VIEW CHANNEL : Once you select the LIST and click the VIEW CHANNEL, one channel is
floating as a VIEW channel.
DIRECT SEARCH : Once you select the LIST and click the DIRECT SEARCH, it searches the
relevant event.
[Notice]
If you uncheck the Update Item you can not use write log and write Image.
19
FDS-410G/910G/1610G : 2000
(DYNAMIC IP USER)
20
registered on DVR)
ADDRESS : It is only for the static IP user so, dont input it.
PORT : It is different as per the model so, please refer to the below information.
FDS-1640GP/820GP : 2100
FDS-410G/910G/1610G : 2000
DEVICE : Select the DVR model to connect.
Input the DDNS IP as 61.250.157.14
DDNS PORT : It is different as per the model so, please refer to the below information..
FDS-1640GP/820GP : 2200
/ FDS-410G/910G/1610G : 1900
When above process is finished, press the ADD DVR to complete the registration. Then, the
list shows up the DVR list located right side.
[Notice]
NASS function is available on G and FP series DVRs. The DVR registration is same as it on CMS.
To draw the recorded information from the connected DVR, click GET THE RECORD
INFORMATION.
If there is the record information, it shows on calendar.
21
If you click the date from the calendar, it shows the record information as per the channel. If
you select the hour, the minute record information show up.
According to the record type, the bar color is different.
(Ex 1)
The record bar show up on the time and as per the record type, the color is different. .
Below image shows emergency or continuous record(green color) from 0 ~ 4.
(Ex 2)
10 ~ 11 : Since there is the Green and yellow bar, it mean the emergency or
continuous record and, at same time, there is the motion detection record.
12 ~ 13 : There is no recorded data.
22
Select the backup start/end time from the recorded data on DVR.
[9] Select the saving folder
Select the folder to save the backup file by Find folder icon click.
23
24
17. SCREEN
S
CO
ONTROL
CMS pro
ovides variou
us display co
ontrol for monitoring an
nd users con
nvenience.
Channel Viewer
It enlarg
ges the specific channel while monittoring
One channel
c
pop-up : Press Ctrl
he pop-up window,
w
doub
ble click the left button of mouse, S-PIP screen which is enttire
On th
chann
nel of DVR. .
One channel
c
full mode : Double click the
e left button of mouse on
o the speciffic channel which
w
want to
o see full mo
ode.
25
S-PIP
Double click the cerrtain channe
el while pressing the Sh
hift, the channel involve
ed DVR imag
ge shows
up as a PIP.
DIGITA
AL ZOOM
This fun
nction is provviding softw
ware digital zoom
z
In/Out of target po
oint on the screen. Pixells or
mosaic could be see
en as screen
n is zoomed in.
ZOOM IN
OUT
ZOOM O
26
o use]
[How to
Selectt single full channel and
d place mouse cursor where user wants
w
to zoom in. By using scroll
wheell of the mo
ouse, screen can be zoomed in an
nd out. Dou
uble click left mouse button to
return
n normal scre
een.
[Notice]
* Digital
D
zoom function is not available
e on multi channels
c
scre
een.
* Digital
D
zoom function is not available
e on S-PIP screen.
s
18. CH
C Net Sta
atus
The colo
or change as
a per the streaming frame.
19. Display
D
Setup
27
SS : Sensor Dete
ection
VL : Video Loss
MU : Museum Detection
D
NU : Unattanded
d Detection
[3] FPS / RESOLUTIO
ON: Frame, Resolution
R
in
nfo display.
[4] SHOW ALL: Disp
play all above
e (1)~(3) information.
[5] HIDE
E ALL: Conce
ealing all display informa
ation.
20. CAPTURE
C
This fun
nction is to capture
c
curre
ent screen im
mage and sa
ave into PC.
Savving folder: C:MY
C
DOC
CUMENTSC
CMSCAPTU
URE.
21. BACKUP
B
Backup function ca
an save the archiving
a
file
e from live im
mage or pla
ayback imag
ge into the re
emote
PC.
28
Inpu
ut file name. (If file nam
me is not assiigned, it will create sugg
gesting file n
name autom
matically)
Sele
ect channel.
Clicck OK to co
onfirm the setup. (As backup starts, menu windo
ow will be d
disappeared. Click
Backup button to sttop the proccess.)
w
you clicck Backup button and end as Bacckup button
n is clicked again
a
Bacckup starts when
22. REMOTE
R
SETUP
FDS-41
10G/910G/1610G Model
[Hard Disk]
D
[1] To
otal Hard Disk capacity
[2] Usable HDD capacity
c
[3] Tyype of saving selection
Overwrite : HDD
H
will ove
erwrite from
m the first wh
hen HDD is full.
f
ding : Record
ding stops when
w
HDD iss full
Stop Record
29
[ Record ]
30
[ Schedule ]
Remote setup for recording schedule.
31
[ Alarm / Sensor ]
Remote setup for Alarm / Sensor.
32
FDS-820GP/1640GP Model
[ System ]
33
[Ramp-up]
34
[Camera]
[Schedule]
Remote setup for recording schedule.
Auto delete : Select whether auto delete use
35
[Weekly]
36
[Holyday]
37
[Alarm]
Remote setup for Alarm
38
[Sensor]
Remote setup for sensor.
39
23. SOUND
S
[1] To
o hear sound
d from seleccted channell
[2] So
ound OFF alll the channe
els
[3] Evvent sounds on checked
d event
24. SEARCH
S
The TIM
ME, EVENT, CALENDAR search is possible as per
p the differrent DVR mo
odels.
t
[1] Search by time.
e
[2] Search by event
e
[3] Search by event.
ontroller.
[4] Playback co
on: It turns to
t live screen from Playb
back.
[5] LIVE butto
40
Playback controller
FDS-410G/910G/1610G Model
[Time search]
Input the time or drag the bar to select time to start search then click the play.
[Event search]
41
[Calendar search]
42
FDS-820GP/1640GP Model
[Time search]
Input the time or drag the bar to select time to start search then click the play
[Event search]
[1] History search : Select the event type and click Get history
[2] Choose the list then click Play button to play.
43
[Calendar search]
On the CMS program, user can remotely operate PTZ cameras and the function includes ZOOM,
FOCUS, PRESET, TOURING functions.
44
Left
Right
Down
[3] AUTO FOCUS of PTZ camera
ZOOM : Zoom In/Out of PTZ camera.
AUTO FOCUS ; Automatic camera focusing.
FOCUS : It focusing the camera.
ZOOM IN/FOCUS IN
45
PRESET SAVE
E : Fix PTZ ca
amera positiion and sele
ect No. 1 on
n PRESET SAV
VE tool, and
d it saves
on preset position No
o.1. The rest 15 position can be save
ed as the same.
PRESET MOV
VE : Select No.
N from the
e PRESET MOVE tool to
o call relevan
nt preset po
ositioned
PTZ cam
mera.
26. PTZ
P
TOURIING (POIN
NT TO POINT)
This fun
nction is forr intensive (repeat)
(
monitoring two
o or more preset posittions of PTZ
Z. AUTO
START and TOURING START are
a available
e.
[1] AUT
TO START
It iss intensive monitoring
m
a
against
two PTZ preset positions
p
rep
peatedly in o
order. Dwell time on
each preset possition can be
e selected.
osition.
START PRESET: Select firrst preset po
T: Select seco
ond preset position.
p
END PRESET
I
S
Select
dwell time
t
at each
h position.
INTERVAL:
AUTO STAR
RT: It startss automaticc monitoring
g between the PTZ cameras two
o preset
positionss as per configured.
URING STAR
RT
[2] TOU
It iss intensive monitoring
m
byy repeat tou
uring of seleccted position of PTZ.
46
[ NOTE ]
o use TOURIING function
n, at least 3 preset posittions or morre are require
ed .
To
27. E-MAP
E
This is an
a electronicc map displa
ay to provid
de efficient monitoring
m
v
viewing
the positions an
nd status
of eventts by camera
as, sensors and
a
DVRs on
n the map.
47
Browse E-map image file by selecting IMPORT MAP, and input new E-map name on the list. By
the same procedure, additional map can be registered. (Double click of e-map title can modify the
title description / DELETE key is for selected E-map removal from the list)
48
positioning the icons (DVR, Camera, Sensor) to a E-map, make it full screen by double click.
Put the icons by dragging the mouse onto the E-map.
For detailed configuration, option window will be opened from the positioned icon.
(Icon selection)
Aside from Camera or Senor icon display on E-map, separate DVR icon can be positioned
on the E-map. The DVR icon will be blinking any event which is happening on the same
DVR.
49
50
MEMO
51