Beruflich Dokumente
Kultur Dokumente
Operation:
Plunger operated:
Dome fitting: Direct linear movement
in line with the manostat capsule
axis changes the regulated pressure
Clevis fitting: Sinusodial motions
to vary the regulated pressure
Plunger force:
The force required to operate these
instruments will be dependent on
pressure range full scale and
adjustment can be expected to be
between 15 and 49 N.
Inlet pressure:
At least 0,2 bar above max
required output pressure, up to
a maximum of 10 bar
Materials:
Body: passivated zinc, epoxy
painted
Springs: Stainless steel
Elastomers: Nitrile
Plunger operated:
Mounting plate: Aluminium
anodised
Operator: Brass, chromiumplated steel
Lever operated:
Foot mounting: zinc-plated steel
Clevis mounting: Brass
Lever and lever accessories:
Steel or chromium-plated steel
Port size
Pressure range
(bar)
Travel range
(mm)
Air consumption
(l/min)
Drawing
No.
Model
G1/4
1,65
Typically < 2
0,1
0,90
R27-232-RNCG
G1/4
1,65
Typically < 2
0,05
0,90
R27-232-RNFG
G1/4
G1/4
1,65
1,65
Typically < 2
Typically < 2
0,02
0,1
0,90
0,90
1
2
R27-232-RNLG
R27-238-RNCG
G1/4
1,65
Typically < 2
0,05
0,90
R27-238-RNFG
G1/4
1,65
Typically < 2
0,02
0,90
R27-238-RNLG
Drawing
No.
Model
*1) % output change for 1 bar supply pressure change at mid-range output
Port size
Pressure range
(bar)
Rotation range
()
Operating torque
(Nm)
Air consumption
(l/min)
G1/4
< 125 10 %
0,14
Typically < 2
0,10
0,93
R27-230-RNCG
G1/4
< 125 10 %
0,14
Typically < 2
0,05
0,93
R27-230-RNFG
G1/4
< 125 10 %
0,14
Typically < 2
0,02
0,93
R27-230-RNLG
*1) % output change for 1 bar supply pressure change at mid-range output
Other options available include captured bleed, natural gas, gearbox, yoke mount, weatherproof, alternative pneumatic connections and low pressure versions.
For options not shown and any specific requirements please contact the Norgren technical department via www.norgren.com/watsonsmith
Option selector
Actuation
R27-23-RN
Substitute
Threads
Substitute
Lever operated
NPT
Plunger (clevis)
ISO G parallel
Plunger (dome)
Pressure range
Substitute
5/13
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en 8.450.220.01
bar
bar
Outlet pressure
Outlet pressure
200
400
600 l/min
400
300
Flow
200
100
0 l/min
Flow
Basic dimensions
11
13,5
6,4
10
6,5
48
7
6
69
OUT
14
44
IN
1/4
1
7,1
1/4
27
3
54
54
35
1
2
3
4
5
19
83
102
6
7
9
10
11
N/en 8.450.220.02
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
5/13
19
R 16
6,5
39
16
11
69
14
IN
1/4
54
1
6
7
54
35
11
Missing dimension/information
see page 2
7,1
83
102
106
13,5
6,4
10
92
125
IN
54
69
1
6
7
9
29
13
12
12
6,3
14
51
14
14
87
76
13
106
Warning
These products are intended for use in industrial compressed
air systems only. Do not use these products where pressures and
temperatures can exceed those listed under Technical features.
Before using these products with fluids other than those specified,
for non-industrial applications, life-support systems, or other
applications not within published specifications, consult NORGREN.
Through misuse, age, or malfunction, components used in
fluid power systems can fail in various modes.
5/13
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en 8.450.220.03