Beruflich Dokumente
Kultur Dokumente
Features
1
----2
----3 + IDNET_A
4 - IDNET_A
--------+ IDNET_B
- IDNET_B
5
6
7
8
4090-9116
ADDRESSABLE ISOLATOR
1#
Product Selection
Model
4090-9116
Description
Addressable IDNet Isolator for 4100U Systems
4090-9801
Description
The 4090-9116 IDNet communications isolator provides
communications isolation to improve installation
convenience and increase system integrity. Mounting
requires a standard 4-inch square electrical box, allowing
the isolator to be conveniently installed where protection
is most likely to be desired.
Short Circuit Isolation. An internal isolation relay
allows a compatible fire alarm control panel to separate
shorted communications wiring from functioning wiring
to optimize the available sensors or other IDNet
addressable devices. The isolators status is
communicated to the control panel, allowing it to assist in
identifying the location of the shorted wiring. When
visible by using the optional trim plates, a pulsing status
LED indicates communications polling status and then
becomes steady on when the isolator is in isolation mode.
Earth Faults. During installation, earth faults frequently
occur. Finding these faults normally requires extensive
wiring disconnection. With the 4090-9116, earth faults on
the IDNet communications lines can be quickly located to
assist in their repair and to restore the system wiring to
normal.
** IDNet addressable communications designs are protected by U.S. Patent No. 4,796,025.
4090-9802
For semi-flush
mounted box
For surface
mounted box
Specifications
Electrical
Communications
Power
Wire Connections
Wiring Distances
IDNet Wiring
Reference
Mechanical
Dimensions
Package
Temperature
Humidity Range
* This product has been approved by the California State Fire Marshal (CSFM) pursuant to
Section 13144.1 of the California Health and Safety Code. See CSFM Listing
7300-0026:252 for allowable values and/or conditions concerning material presented in
this document. It is subject to re-examination, revision, and possible cancellation.
Additional listings may be applicable; contact your local Simplex product supplier for the
latest status.
S4090-0005-2 5/02
1
----2
----3 + IDNET_A
4 - IDNET_A
5
6
7
8
4 090-911 6
A DDRESS ABLE ISOLATOR
1#
Fourth floor
Isolator base
(see note 4)
Third floor
1
----2
----3 + IDNET_A
4 - IDNET_A
5
6
7
8
4 090-911 6
A DDRESS ABLE ISOLATOR
1#
Second floor
1
----2
----3 + IDNET_A
4 - IDNET_A
5
6
7
8
First floor
4 090-911 6
A DDRESS ABLE ISOLATOR
1#
5
6
7
8
4 090-91 16
A DDRESS ABLE ISOLATOR
1#
Wiring Notes:
1. Operation of the 4090-9116 Addressable IDNet Isolator requires
connection to a 4100U IDNet communications channel.
2. This is a one-line drawing showing only IDNet communications
wiring.
S4090-0005-2 5/02
1
--------2
3 + ID NET_A
4 - IDNET_A
--------+IDNET_B
- IDNET_B
5
6
7
8
Last device
Isolator bases
(see note 5)
1#
1
----2
----3 + ID NET_A
4 - IDNET_A
--------+ IDNET_B
- IDNET_B
5
6
7
8
1#
Fourth floor
---
1
2
3
--+ IDNET_A
4 - IDNET_A
---
--+ IDN ET
_B
- ID NET
_B
6
7
8
4090- 9116
ADDRESS ABLEISO LATOR
1#
1
----2
----3 + ID NET_A
4 - IDNET_A
--------+IDNET_B
- IDNET_B
5
6
7
8
--1
--2
3 + I DNET_ A
4 - I DNET_ A
----+ IDNET_ B
- IDNET_ B
--1
--2
_A
3 + IDN ET
_A
4 - ID NET
5
6
7
8
----+ I DNET_ B
- I DNET_ B
5
6
7
8
4090-9116
ADDR ESSABLE ISO LATOR
1#
4090- 9116
AD DRESSABLE ISOLATOR
1#
1#
Third floor
--1
--2
3 + I DNET_ A
4 - I DNET_ A
----+ IDNET_ B
- IDNET_ B
--1
--2
_A
3 + IDN ET
_A
4 - ID NET
5
6
7
8
4090- 9116
I NST. INSTR .574- 872 REV.
1#
1
----2
----3 + ID NET_A
4 - IDNET_A
--------+ IDNET_B
- IDNET_B
5
6
7
8
1#
5
6
7
8
----+ I DNET_ B
- I DNET_ B
AD DRESSABLE ISOLATOR
1#
Second floor
Fire Control
1
--------2
3 + IDNET_A
4 - IDNET_A
--------+ ID NET_B
- ID NET_B
5
6
7
8
First device
4090-911 6
ADD RESSA BLE IS OLATOR
1#
First floor
1
----2
----3 + IDN ET_ A
4 - ID NET_ A
--------+ IDNET_ B
- IDNET_ B
409 0-9116
AD DRE SSABLE ISOLATO R
Class A
IDNet Circuit
5
6
7
8
1#
Fire Control
S4090-0005-2 5/02
Mounting Information
1#
Status LED
4090-9116 Addressable
IDNet Isolator
4-9/16"
(116 mm)
4-5/16"
(109 mm)
Tyco, Simplex, the Simplex logo, TrueAlarm, and IDNet are trademarks of Tyco International Services AG or its affiliates in the U.S. and/or other countries.
S4090-0005-2 5/02
www.tepg.com