Beruflich Dokumente
Kultur Dokumente
Certifications:
Schlage products, as noted in our catalog, are tested by independent laboratories for compliance with UL and
ANSI standards. Any field modification or alteration of product will void certification.
For a list of available BAA/ARRA compliant products please contact your local SSC or sales representative to see the
Ingersoll Rand Security Technologies BAA/ARRA catalog.
Disclaimer:
The Schlage Lock Company reserves the right to make changes in designs and specifications, to make addition or improvements
on its products or to discontinue products without incurring any obligation. The Schlage Lock Company is not responsible
for any modification, addition or alteration to our products by others.
Price Book 71 i
Effective April 5, 2010
Table of Contents
CYLINDER/KEYS/PORTABLE SECURITY/ MISCELLANEOUS
CABINET LOCKS Tools & Kits Tool-1
Cylinders CYL-1 Keying Tools & Kits . . . . . . . . . . . . . . . Tool-2
Schlage Cylinder & Keyway Terminology CYL-2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-6
Multiple Tailpiece Cylinders . . . . . . . . . . CYL-3 Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-8
Bulk Pack Cylinders . . . . . . . . . . . . . . . CYL-4 Merchandising Aids Merch-1
Primus Cylinders-Sub-Assembled . . . . CYL-5 Display Mounts . . . . . . . . . . . . . . . . . . . Merch-3
A & H, AL, CL, D, ND, F, FA, PL, Miscellaneous . . . . . . . . . . . . . . . . . . . . Merch-4
S & S200 . . . . . . . . . . . . . . . . . . . . . . . . CYL-6 Glossary
B500 . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-14
B100, B250, B400, E/B, F100, H,
MD, S200 . . . . . . . . . . . . . . . . . . . . . . . . . CYL-16
B300, BA300, F300, FA300 . . . . . . . . . CYL-20
B600/700/800 . . . . . . . . . . . . . . . . . . . . CYL-22
BC100 . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-26
Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-28
Schlage cylinders for Falcon &
Von Duprin . . . . . . . . . . . . . . . . . . . . . . . CYL-38
Rim Cylinders . . . . . . . . . . . . . . . . . . . . CYL-39
Interchangeable Cores . . . . . . . . . . . . . CYL-41
Competitor Retrofit Cylinders . . . . . . . . CYL-43
Letter/Mail Box . . . . . . . . . . . . . . . . . . . . CYL-47
Special Cylinders . . . . . . . . . . . . . . . . . . CYL-48
Pins, Springs & Pinning Components . . CYL-49
Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-51
Shells . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-52
Competitive Keying Kit Refills . . . . . . . . CYL-53
Keys & Keying Keys-1
Keys Ordered Separately . . . . . . . . . . . Keys-2
Key Stamping . . . . . . . . . . . . . . . . . . . . Keys-12
Cylinder Stamping . . . . . . . . . . . . . . . . . Keys-13
Construction Core Program . . . . . . . . . . Keys-14
Keying Charges . . . . . . . . . . . . . . . . . . . Keys-16
QuicKey Program . . . . . . . . . . . . . . . . . Keys-21
SITEMASTER 200 ® . . . . . . . . . . . . . . . Keys-23
Portable Security PS-1
PL Series Cross Reference . . . . . . . . . . PS-3
Key-In-Knob with Cylinder . . . . . . . . . PS-4
Key-In-Knob Less Cylinder . . . . . . . . PS-5
SFICLess Cylinder . . . . . . . . . . . . . . . . PS-6
Full Size IC Core . . . . . . . . . . . . . . . . . PS-7
Custom Engraving Brass Padlocks
and Chrome Plated Brass Padlocks . . PS-8
Parts and Accessories . . . . . . . . . . . . . . PS-9
Flex Security . . . . . . . . . . . . . . . . . . . . . PS-12
CL-Series CL-1
Complete Locks . . . . . . . . . . . . . . . . . . CL-2
Options . . . . . . . . . . . . . . . . . . . . . . . . . CL-3
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-4
ii Price Book 71
Effective April 5, 2010
How to Use the Price Book
New to Price Book 70
• New decorative levers • ND Series latches and strikes in Stock Products section
- Accent and St. Annes (L Series) • ND97 Corridor function with Vandlgard option
- “danmark” stainless steel levers (L Series) • Residential electronics (FE, BE Series)
- Merano (FA Series) • 7 New Large Format IC Padlocks:
- Manhattan (F Series) - KS43 Series Brass Padlocks With New Shackle Lengths
• Vandlgard option for L Series - New Product Styles - KS72 Series Round Body &
• Vandlgard retrofit kit for L Series KS92 Series Shrouded Padlocks
• Ingersoll-Rand compatible cams chart (CYL-36)
Ordering Options Form Name and Number Notes
1. Express Stock Orders Stock Products 10-day order processing is measured in busi-
These orders are for products shown under the Stock ms-i500.1 Rev. 05/03 ness days from complete order entry through
Products tab and qualify for 10-day order processing. This ms-i500.2 Rev. 05/03 factory production and shipment. In some
program is only for Schlage branded commercial products. cases order entry time may be affected by sea-
sonal volume and order complexity. Your
shipping choice adds to total delivery time.
Your Purchase Order
Commercial Products *
1. Master Keyed Orders Master Keyed Order Form Use of order forms other than Schlage order
These orders are subject to standard lead time and process. ms-i100.01 Rev. 3/01 forms can result in an increased lead time. An
Please attach the necessary forms if a restricted key system ms-i100.02 Rev. 3/01 anticipated ship date will be included with each
or Primus order. ms-i150 Rev. 2/01 order acknowledgement.
2. Non-Master Keyed Orders Non-Master Keyed
These orders are subject to standard lead time and process. Order Form Use of order forms other than Schlage order
If you are ordering a restricted key system or Primus order, ms-i250 Rev. 2/01 forms can result in an increased lead time.
please attach the necessary forms. ms-i300 Rev. 2/01
3. Primus Face Sheet Primus Face Sheet
Keys *
1. Standard Order Plan Your Purchase Order All orders will be processed based on
Residential
All residential Schlage, and Dexter by Schlage products normal factory lead times. An anticipated
currently listed in this price book. see information required on ship date will be included with each order
your order in "Forms & acknowledgement.
Examples" price book tab.
1. Custom Logo Request (CLR) Custom Logo Request Please submit the custom product request
This request is for the inclusion of a Customer's specific (CLR) Form form available in the "Forms & Examples"
Portable
logo onto the Portable Security Padlocks through the use of section. There is a one-time coining die
laser engraving. Rev. 8/30/05 set-up charge. The charge varies depending
on the art work requested.
* Please note that commercial order processing dates reflect manufacturing time only and do not include order processing or shipment times,
which are variable.
Stock Products
Included in this SKU based listing are the products you’ve told us you need on a consistent and on-going basis. There are
hundreads of separate products that are included in this offering that have been pre-built and inventoried to meet your immediate
needs. See our listing under the STOCK PRODUCTS tab in the front of the book.
Non-Stock Products
In each tabbed section of Price Book 70 you will find a comprehensive listing of our current offering per product series.
Products should be ordered via the traditional method by designating the product, design, finish, handing, and options for each
line item (refer to "How to Order" in the Forms & Exampl es section of the price book). All orders will be processed based
on normal factory lead times. These lead times vary throughout the year and are affected by production volumes, supplier sched-
ules and quantity demands. An anticipated ship date will be included with each order acknowledgement.
Some of the products listed in these sections require extended lead times. You will find the hourglass symbol () associated with
products that require extended lead times so that you are aware of this condition prior to placing your order. Products included in
this classification are those items that represent a unique combination of product attributes (i.e. finish, trim, function, etc.) that
typically require additional manufacturing care and attention. Products marked “” will routinely exceed normal factory lead
times and anticipated ship dates will be indicated with each order acknowledgement.
iv Price Book 71
Effective April 5, 2010
How to Use the Price Book
MASTERKEYEDORDERS LEADTIMES
In an effort to expedite the process of managing our growing volume of Master Keyed order requests, Master Keyed orders sub-
mitted in the following choice of formats will receive factory lead times based on the following criteria:
• Orders submitted on the Key System Summary form (MS-I200) and the Master Keyed Order forms (MS-I100 and MS-I150)
OR
• Orders submitted on the Key System Summary form (MS-I200) and your purchase order with information specified in the
following sequence:
Qty Product Design Finish Hand Latch Strike Addl Details
Door Detail Information DHI Key Symbol
Lead times for Master Keyed orders in any other format will be extended at least 5 additional working days. In all cases, allow
additional lead time for clarifications and complex keying requirements. The Master Keyed order forms are located in the
Forms & Exampl es/ Keys and Keyi ng sections of the price book. For your convenience you can download the Master
Keyed order forms from our web site at http://professional.schlage.com/sales_service/sss_forms.asp
• All orders must be prominently marked "QuicKey" on the top of your order and/or use our QuicKey Order Form found in the
Forms & Exampl es section.
• QuicKey orders must be comprised of 100% qualifying key blanks and/or cores (i.e. not combined with orders for any
other products).
• When ordering Primus or other restricted key blanks, the appropriate face sheets and letters of authorization must accompany
your order.
QuicKey key blanks are available only in boxes of 50 with exception of control keys. Primus and Everest key blanks ordered
via this program will ship in 5-days and Classic and competitive replacement key blanks will ship in 10-days. Mixed QuicKey
orders will revert to the longer lead time. For complete program details and product availability refer to the QuicKey listing in
the Keys & Keyi ng section of the price book.
Residential Keying
Resi denti al Master Key (RMK): RMK is a single key that will grant access to all opening with in the facility (i.e. master
key). Additionally, each tenant would need to be provided with a key that will grant them access to their apartment only. The
same keying situation would exist in any form of a multi family housing complex.
Resi denti al Constructi on Keyi ng (RCK): RCK (also referred to as loss ball) by design allows the use of a temporary
master key during the construction phase of a project. At the end of the construction phase, the use of the homeowner key will
trigger the lost ball construction device, thus eliminating the temporary master key used during construction.
Price Book 71 v
Effective April 5, 2010
Notes
vi Price Book 71
Effective April 5, 2010
Introduction TERMS & CONDITIONS
Table of Contents
General Terms and Conditions
for Sales and Service Terms-2
Standard Schlage Product
Terms and Conditions Terms-4
Freight Weight Chart Terms-7
Schlage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terms-7
Portable Security . . . . . . . . . . . . . . . . . . . . . . . . . Terms-9
Product Warranties Terms-10
Commercial Applications . . . . . . . . . . . . . . . . . . Terms-10
Residential Applications . . . . . . . . . . . . . . . . . . . Terms-11
Distributor Function and Location Policy Terms-11
Cylinder Policies Terms-12
Primus® Sales Policy . . . . . . . . . . . . . . . . . . . . . Terms-12
Everest® Sales Policy . . . . . . . . . . . . . . . . . . . . . Terms-13
Everest Small Format Interchangeable
Core Key Control Policies . . . . . . . . . . . . . . . . . Terms-14
Restricted Keyway Policy . . . . . . . . . . . . . . . . . . Terms-14
Construction Core Program Policy . . . . . . . . . . . Terms-14
Door Labeling Policy Terms-15
Master Key Shipment Policy Terms-15
Hardware Finishes Terms-16
How To Order Forms and Examples
This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice. All
prices may be subject to discount. Products considered “Specials” (“X” designated part numbers) fall outside of
standard discount terms. Contact Customer Service for clarification.
Minimum Order Size for Channel Discount:
)88$1+2,+($8,(($/&".$\Z]]>]]$8'(/$(&"88$3,$2'(01:./,2$"/$311V$.,/>
Claims and Returns: Claims and Returns:
O:,$/1$<0&8"*,$,++1+b O:,$/1$6:(/1-,+$,++1+b
h 68"'-($A1+$(&1+/"*,($".2a1+$'.01++,0/84$A'88,2$1+2,+($-:(/$3,$A'8,2$5'/&$ h P/$'($/&,$718'04$1A$/&,$<0&8"*,$R10V$61-7".4$
6:(/1-,+$<,+='0,$5'/&'.$^]T2"4($1A$+,0,'7/$1A$-"/,+'"8>$$ /1$.1/$"00,7/$+,/:+.($1A$".4$-"/,+'"8($/&"/$"+,$
h P.01++,0/$1+2,+$"0V.158,2*-,./($-:(/$3,$0&".*,2$34$A"W'.*$+,9:,(/$/1$ 01++,0/84$A:+.'(&,2$"($7,+$/&,$2,"8,+D($7:+0&"(,$
6:(/1-,+$<,+='0,$i$!_]]#$jZYT]ffZ$:71.$+,0,'7/$1A$"0V.158,2*-,./>$ 1+2,+>
h P.=1'0,$"2E:(/-,./($-:(/$3,$A"W,2$/1$6+,2'/$)2E:(/-,./($i$!^Uk#$_U]T^]j_ h M,/:+.$1A$7+12:0/$2:,$/1$0:(/1-,+$1+2,+$,++1+$
5'/&'.$^]T2"4($1A$+,0,'7/$1A$'.=1'0,> 1+$"001--12"/'1.$-:(/$3,$7+,T"++".*,2$5'/&$
h M,/:+.,2$*112($5'88$.1/$3,$"00,7/,2$5'/&1:/$7+'1+$5+'//,.$"77+1="8$A+1-$ /&,$P.*,+(188$M".2 <,0:+'/4$l$<"A,/4$
<0&8"*,>$6+,2'/$5'88$3,$3"(,2$:71.$/&,$M,/:+.$J"/,+'"8$):/&1+'c"/'1.$!MJ)#$ 61.(:8/"./$".2$"77+1=,2$34$H:('.,(($L.'/$
'((:,2$34$6:(/1-,+$<,+='0,$1+$/&,$P.*,+(188$M".2 <,0:+'/4$l$<"A,/4$ J"."*,+>$$$
61.(:8/"./$".2$A'."8$"00,7/".0,$34$<0&8"*,>$M,/:+.($-:(/$3,$7+1-'.,./84$ h M,/:+.($"+,$(:3E,0/$/1$"$-'.'-:-$+,(/10V'.*$
-"+V,2$5'/&$/&,$MJ)$.:-3,+$".2$A18815$+,/:+.$*:'2,8'.,($1.$/&,$MJ)$ 0&"+*,$1A$^Z[$A1+$:.17,.,2$0"(,($1A$(/10V$
A1+->$M,/:+.$A+,'*&/$01(/$'($7+,7"'2$34$/&,$0:(/1-,+$".2$+,'-3:+(,2$"/$L;<$ 7+12:0/>
*+1:.2$+"/,> h C1.T(/10V$-"/,+'"8($"+,$.1/$+,/:+."38,>$$
h ;+12:0/$01.('2,+,2$3,'.*$2,A,0/'=,$"A/,+$+,=',5$34$/&,$P.*,+(188$M".2 h ;+12:0/$-:(/$3,$+,0,'=,2$'.$1+'*'."8$A"0/1+4$
<,0:+'/4$l$<"A,/4$61.(:8/"./$-:(/$3,$+,/:+.,2$/1$/&,$<0&8"*,$R10V$61-7".4$ 01.2'/'1.$".2$0,+/'A',2$"($(:0&$34$<0&8"*,$
A"0'8'/4$'.$<,0:+'/4B$6181+"21$"001-7".',2$34$".$MJ)>$M,78"0,-,./$1+2,+($ M,0,'='.*>
A1+$2,A,0/'=,$7+12:0/$5'88$3,$,./,+,2$34$6:(/1-,+$<,+='0,$"/$/&,$/'-,$1A$ h C1$+,/:+.$A+,'*&/$0&"+*,($5'88$3,$0+,2'/,2>
.1/'A'0"/'1.>
L.2,+$.1$0'+0:-(/".0,($'($<0&8"*,$8'"38,$A1+$'.0'2,./"8$1+$01.(,9:,./'"8$2"-"*,(>$$6&"+*,T3"0V($5'88$.1/$3,$"8815,2>
Freight Policy:
6:(/1-,+$1+2,+($'.$,W0,(($1A$\_B]]]$8'(/$5'88$3,$(&'77,2$A+,'*&/$7+,7"'2$34$<0&8"*,$/1$"$('.*8,$2,(/'."/'1.$71'./$'.$/&,$L><>$I+2,+($8,((
/&".$/&'($"-1:./$5'88$(&'7$L;<aM;<$7+,7"'2$".2$"0/:"8$A+,'*&/$5'88$3,$'.2'0"/,2$1.$/&,$0:(/1-,+D($'.=1'0,>$)88$*112($"+,$(&'77,2$K>I>H>
A"0/1+4$1+$O<6$".2$3,01-,$/&,$0:(/1-,+D($7+17,+/4$5&,.$/&,4$7"(($'./1$/&,$&".2($1A$/&,$/+".(71+/"/'1.$01-7".4>$<0&8"*,$+,(,+=,($/&,
+'*&/$/1$:(,$1:+$0&1'0,$1A$0"++',+>$<0&8"*,$5'88$(&'7$"($+,9:,(/,2B$A+,'*&/$0188,0/B$'A$/&,$0:(/1-,+$'($5'88'.*$/1$3,"+$/&,$,./'+,$,W7,.(,$".2$(1
'.2'0"/,($1.$/&,$1+2,+>$I/&,+$2,8'=,+4$17/'1.($'.08:2,$C,W/$O"4B$YT2"4B$".2$^T2"4$(&'77'.*>
Type of Product
• Stock Products
• Primus® Keys Normal Factory Extended Factory
Type of Change • QuicKey Lead Time Items Lead Time Items
1. Change to: • OK within first 5-days • OK within first 10-days
from receipt of order. from receipt of order.
– Product, creating a
different SKU number Not Accepted • If after 5-days, item must • If after 10-days, item must
– Keying* be deleted from order be deleted from order
(see 3, 25% handling (see 3, 50% handling
charge will apply) and charge will apply) and
entered as a new order entered as a new order
(see 2). (see 2).
2. Change to: • New order with normal lead-time must be generated for
additions. Same terms & conditions will be applied if
– Increase quantity of Not Accepted requested so long as the original order has not been
existing item(s) shipped.
• Additions received after the original order ships must be
– Add new item(s) entered as a new order and will stand-alone for lead-time
and terms & conditions.
3. Change to: • OK within first 5-days • OK within first 10-days
from receipt of order. from receipt of order.
– Delete item(s)
Not Accepted • If after 5-days, subject to • If after 10-days, subject to
– Reduce quantity of handling charge of 25% of handling charge of 50% of
existing item(s) the net price of the deleted the net price of the deleted
item(s).** item(s).**
– Cancel order
* Includes any change to k ey sy mbol, door identification and/or cylinder pinning.
** Handling charges are billed on the original order.
";B=Cc 7^ 6&".*,$1+2,+($-:(/$3,$A"W,2$/1$6:(/1-,+$<,+='0,$i$!_]]#$jZYT]ffZ>$;8,"(,$7+1-'.,./84$-"+V$A"W$"($"$0&".*,$1+2,+
+,9:,(/>$K1+$9:,(/'1.($0"88$!_]]#$_jkTU_fj>
9^ 6:(/1-,+$<,+='0,$5'88$"0V.158,2*,$+,0,'7/$1A$0&".*,$1+2,+($".2$"0/'1.$/"V,.>
K^ 6&".*,$1+2,+($+,(:8/'.*$'.$&".28'.*$0&"+*,($+,9:'+,$0:(/1-,+$+,=',5$7+'1+$/1$0&".*,$3,'.*$-"2,>
O^ 6&".*,($/1$</10V$;+12:0/($0".$3,$-"2,$'A$/&,$7+12:0/$'($1:/$1A$(/10V>
%&,$A18815'.*$(7,0'A'0$7+12:0/$/,+-($".2$01.2'/'1.($(:7,+(,2,$/&,$*,.,+"8$/,+-($".2$01.2'/'1.($1A$("8,$".2$(,+='0,$1.84$/1$/&,$,W/,./
7+1='2,2$&,+,'.>$$)88$1/&,+$/,+-($".2$01.2'/'1.($01./"'.,2$'.$/&,$S,.,+"8$%,+-($".2$61.2'/'1.($1A$<"8,$".2$<,+='0,$7+1='2,2$'.$/&'(
;+'0,$H11V$5'88$*1=,+.$/&,$("8,$1A$7+12:0/($'2,./'A',2$'.$/&'($;+'0,$H11V>
The price list in this price book supersedes and cancels all previous price lists contained in any other price books or
versions thereafter. Prices shown are subject to change without notice. All prices are subject to discount. Products
considered “Specials” (“X” designated part numbers) fall outside of standard discount terms. Contact customer
service for clarification.
Service Charges:
<,+='0,$0&"+*,($1.$7"(/$2:,$'.=1'0,($!,W0,7/$="8'284$2'(7:/,2$'/,-(#$5'88$3,$"((,((,2$"($A18815(b$U$UaY[$7,+$-1./&$1+$/&,$-"W'-:-
"8815"38,$34$8"5$1.$7"(/$2:,$"-1:./($17,.$"($1A$/&,$8"(/$2"4$1A$,"0&$0"8,.2"+$-1./&$:./'8$/&,$7"(/$2:,$"-1:./($"+,$7"'2>
Changes or Cancellations:
6&".*,($1+$0".0,88"/'1.($/1$".$1+2,+$-:(/$3,$'.$5+'/'.*$".2$-"4$+,(:8/$'.$"22'/'1."8$0&"+*,($A1+$8"31+$".2a1+$-"/,+'"8(>$6&".*,($-"4$+,(:8/
'.$"$2,8"4$'.$/&,$(0&,2:8,2$(&'7$2"/,>$)22'/'1.($/1$1+2,+($5'88$3,$,./,+,2$"($(,7"+"/,$(/".2T"81.,$1+2,+($".2$-:(/$9:"8'A4$A1+$"88$/,+-($1A
("8,B$'.08:2'.*$2'(01:./(B$1.$".$'.2'='2:"8$3"('(>$$6&".*,($1+$2,8,/'1.($+,(:8/'.*$'.$".$1+2,+$('c,$1A$8,(($/&".$1:+$-'.'-:-$5'88$.1/$3,
"00,7/,2>$$I+2,+($A1+$.1.T0"/"81*,2B$(7,0'"8$1+$.1.(/".2"+2$'/,-($-"4$.1/$3,$0".0,8,2>$$K"0/1+4$1+2,+($-"4$.1/$3,$0&".*,2$5'/&'.$k$2"4(>
Certifications:
<0&8"*,$7+12:0/(B$"($.1/,2$'.$1:+$0"/"81*B$"+,$7+12:0,2$".2$/,(/,2$34$'.2,7,.2,./$8"31+"/1+',($A1+$01-78'".0,$5'/&$LR$".2$)C<P$(/".T
2"+2(>$).4$A',82$-12'A'0"/'1.$1+$"8/,+"/'1.$1A$7+12:0/$5'88$=1'2$0,+/'A'0"/'1.>
6174+'*&/$Y]]_B$P.*,+(188TM".2$61-7".4
)88$+'*&/($+,(,+=,2>$;+'./,2$'.$L><>)>
Key Blanks
Box Avg. Wt. Case Avg. Wt. Case
Product Quantity per Box Quantity per Case Cubic Feet
5-Pin 50 1.5 1000 23.5 .2
6-Pin Classic 50 1.2 1000 24.6 .2
Everest® 50 1.75 500 17.9 .2
999201 Rekeyable Locking Cable - 6' x 5/8" (15mm) 5 17.14 1.02 12.75 8 17.25
999218 Locking Key Cable - 5' x 1/2" (12mm) 5 5.71 0.29 11 5 9
999225 Resettable Combination Cable - 5' x 3/8" (10mm) 5 6.66 0.31 10 6 9
820406 Heavy Duty Double Loop Steel Cable - 7' x 5/8" (15mm) 5 15.01 0.84 11.25 12 10.75
820413 Heavy Duty Double Loop Steel Cable - 15' x 5/8" (15mm) 4 21.12 1.14 13.13 12.25 12.25
999249 Double Loop Flexible Steel Cable - 4' x 3/8" (10mm) 5 4.49 0.24 11 6.5 5.75
999256 Double Loop Flexible Steel Cable - 7' x 3/8" (10mm) 5 7.01 0.32 13.75 6 6.75
999263 Double Loop Flexible Steel Cable - 15' x 3/8" (10mm) 5 12.65 0.67 12.25 9.5 10
999270 Double Loop Flexible Steel Cable - 30' x 3/8" (10mm) 5 22.81 0.89 10.25 11.5 13
994800 Double Loop Cable (4' x 3/8") & Weather Cover Padlock 5 7.75 0.6 11 9 10.5
994862 Double Loop Cable (15' x 3/8") & Weather Cover Padlock 5 15.15 0.88 12 10.75 11.75
999232 Extra Large Padlock 5 14.59 0.6 14 8.25 9
851226KA Round Body Solid Steel Padlock - 2" shackle 6 8.69 0.41 10.25 6.5 10.75
994831 Round Body Solid Steel Padlock 2pk Keyed Alike - 2" shackle 4 13.65 0.33 8.5 9.5 7
850465 Dial Combination Padlock 6 2.82 0.16 6 4.5 10.25
850410 Covered Laminated Padlock 2pk Keyed Alike - 1 1/2" (40mm) 6* 7.14 0.28 6.25 8 9.75
855156 Shackle-less Padlock 6 14.11 0.33 8.66 5.9 11.22
KS11A1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 3/4" shackle 6 5.08 0.05 2.76 7.76 3.94
KS11D1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 1 1/2" shackle 6 5.52 0.06 2.76 7.76 4.53
KS11F1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 2" shackle 6 5.52 0.06 2.76 7.76 5.00
KS11G1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 4" shackle 6 6.18 0.09 2.76 7.76 7.05
KS13A2300 Brass Padlock KNK Cylinder 3/4" shackle, KD 6 6.18 0.05 2.76 7.76 3.94
KS13D2300 Brass Padlock KNK Cylinder 1 1/2" shackle, KD 6 6.18 0.06 2.76 7.76 4.53
KS13F2300 Brass Padlock KNK Cylinder 2" shackle, KD 6 6.62 0.06 2.76 7.76 5.00
KS13G2300 Brass Padlock KNK Cylinder 4" shackle, KD 6 7.28 0.09 2.76 7.76 7.05
KS21A1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 3/4" shackle 6 5.52 0.05 2.76 7.76 3.94
KS21D1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 1 1/2" shackle 6 5.52 0.06 2.76 7.76 4.53
KS21F1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 2" shackle 6 5.52 0.06 2.76 7.76 5.00
KS21G1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 4" shackle 6 6.62 0.09 2.76 7.76 7.05
KS23A2300 Brass Padlock KNK Cylinder 3/4" shackle, KD 6 6.18 0.09 2.76 7.76 7.05
KS23D2300 Brass Padlock KNK Cylinder 1 1/2" shackle, KD 6 6.62 0.06 2.76 7.76 4.53
KS23F2300 Brass Padlock KNK Cylinder 2" shackle, KD 6 6.62 0.06 2.76 7.76 5.00
Padlocks
KS23G2300 Brass Padlock KNK Cylinder 4" shackle, KD 6 7.28 0.09 2.76 7.76 7.05
KS41A1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 3/4" shackle 6 6.18 0.09 2.76 7.76 7.05
KS41D1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 1 1/2" shackle 6 6.18 0.06 2.76 7.76 4.53
KS41F1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 2" shackle 6 6.62 0.06 2.76 7.76 5.00
KS41G1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 4" shackle 6 7.73 0.09 2.76 7.76 7.05
KS43A2300 Brass Padlock KNK Cylinder 3/4" shackle, KD 6 6.62 0.09 2.76 7.76 7.05
KS43A3200 Brass Padlock Full Size IC (Less Cylinder) 3/4" shackle 6 6.62 0.09 2.76 7.76 7.05
KS43D2300 Brass Padlock KNK Cylinder 1 1/2" shackle, KD 6 7.28 0.06 2.76 7.76 4.53
KS43D3200 Brass Padlock Full Size IC (Less Cylinder) 1 1/2" shackle 6 7.28 0.06 2.76 7.76 4.53
KS43F2300 Brass Padlock KNK Cylinder 2" shackle, KD 6 7.28 0.06 2.76 7.76 5.00
KS43F3200 Brass Padlock Full Size IC (Less Cylinder) 2" shackle 6 7.28 0.06 2.76 7.76 5.00
KS43G2300 Brass Padlock KNK Cylinder 4" shackle, KD 6 8.39 0.09 2.76 7.76 7.05
KS43G3200 Brass Padlock Full Size IC (Less Cylinder) 4" shackle 6 8.39 0.09 2.76 7.76 7.05
KS72F1200 Steel Padlock SFIC (Less Cylinder) 2" shackle 6 10.6 0.10 3.27 9.29 5.59
KS72F2300 Steel Padlock KNK Cylinder 2" shackle, KD 6 5.08 0.10 3.27 9.29 5.59
KS72F3200 Steel Padlock Full Size IC (Less Cylinder) 2" shackle 6 5.08 0.10 3.27 9.29 5.59
KS72M1200 Steel Padlock SFIC (Less Cylinder) 1" shackle 6 9.93 0.09 3.27 9.29 4.88
KS72M2200 Steel Padlock KNK (Less Cylinder) 1" shackle 6 9.93 0.09 3.27 9.29 4.88
KS72M3200 Steel Padlock Full Size IC (Less Cylinder) 1" shackle 6 9.93 0.09 3.27 9.29 4.88
KS72F2200 Steel Padlock KNK (Less Cylinder) 2" shackle 6 10.6 0.10 3.27 9.29 5.59
KS82M1200 Steel Padlock SFIC (Less Cylinder) 1" shackle 6 7.73 0.07 3.27 8.82 4.29
KS82M2200 Steel Padlock KNK (Less Cylinder) 1" shackle 6 7.73 0.07 3.27 8.82 4.29
KS92M1200 Steel Padlock SFIC (Less Cylinder) 1" shackle 6 9.93 0.07 3.27 8.82 4.29
KS92M2200 Steel Padlock KNK (Less Cylinder) 1" shackle 6 9.93 0.07 3.27 8.82 4.29
KS92M3200 Steel Padlock Full Size IC (Less Cylinder) 1" shackle 6 9.93 0.07 3.27 8.82 4.29
855101 Vehicle Hasp 3 10.04 0.43 10.38 8.5 8.5
855118 Flexible Steel Hasp 6 5.95 0.44 10.43 5.31 13.58
Hasps
<:3E,0/$/1$/&,$/,+-($".2$01.2'/'1.($1A$/&'($5"++"./4B$<0&8"*,$R10V$61-7".4$!?<0&8"*,@#$,W/,.2($"$8'A,/'-,$8'-'/,2$-,0&".'0"8$".2$ZT4,"+$A'.'(&$5"++"./4$/1$/&,
1+'*'."8$01.(:-,+$:(,+$!?I+'*'."8$L(,+@#$1A$O,W/,+$34$<0&8"*,$7+12:0/($!?;+12:0/@#$"*"'.(/$2,A,0/($'.$-"/,+'"8$".2$51+V-".(&'7B$"($81.*$"($/&,$I+'*'."8$L(,+
100:7',($/&,$+,('2,./'"8$7+,-'(,($:71.$5&'0&$/&,$;+12:0/$5"($1+'*'."884$'.(/"88,2>
XHDB,&:HJDI=,QGJJ,@;c L71.$+,/:+.$1A$/&,$2,A,0/'=,$;+12:0/$/1$<0&8"*,B$<0&8"*,D($(18,$138'*"/'1.B$"/$'/($17/'1.B$'($/1$,'/&,+$+,7"'+$1+$+,78"0,$/&,$;+12:0/B$1+$+,A:.2
/&,$1+'*'."8$7:+0&"(,$7+'0,$'.$,W0&".*,$A1+$/&,$;+12:0/>$I+'*'."8$L(,+b$%&'($5"++"./4$1.84$"778',($/1$/&,$I+'*'."8$L(,+$1A$;+12:0/(>$%&'($5"++"./4$'($.1/$/+".(A,+"38,>$
XHDB,GC,E;B,:;F=?=@c,%&,$A18815'.*$01(/(B$,W7,.(,($".2$2"-"*,($"+,$.1/$01=,+,2$34$/&,$7+1='('1.($1A$/&'($8'-'/,2$e"++"./4b$!'#$8"31+$01(/($'.08:2'.*B$3:/$.1/$8'-'/T
,2$/1B$(:0&$01(/($"($/&,$+,-1="8$".2$+,'.(/"88"/'1.$1A$;+12:0/X$!'.#$(&'77'.*$".2$A+,'*&/$,W7,.(,($+,9:'+,2$/1$+,/:+.$;+12:0/$/1$<0&8"*,X$".2$!'''#$".4$1/&,+$'.0'2,./"8B
01.(,9:,./'"8B$'.2'+,0/B$(7,0'"8$".2a1+$7:.'/'=,$2"-"*,(B$5&,/&,+$3"(,2$1.$01./+"0/B$5"++"./4B$/1+/$!'.08:2'.*B$3:/$.1/$8'-'/,2$/1B$(/+'0/$8'"3'8'/4$1+$.,*8'*,.0,#B$7"/,./
'.A+'.*,-,./B$1+$1/&,+5'(,B$,=,.$'A$"2='(,2$1A$/&,$71(('3'8'/4$1A$(:0&$2"-"*,(>$<1-,$810"8$8"5($21$.1/$"8815$/&,$,W08:('1.$1+$8'-'/"/'1.$1A$'.0'2,./"8$1+$01.(,9:,./'"8
2"-"*,(B$(1$/&,$"31=,$,W08:('1.$1+$8'-'/"/'1.$-"4$.1/$"7784$/1$41:>$
3H=,<?;FGCG;EC,;>,BHGC,QD??DEBL,@;,E;B,D<<JL,B;,/?;@A:BCc !'#$:(,2$'.$01--,+0'"8$"778'0"/'1.(X$!''#$:(,2$'.$01--1.$"+,"$"778'0"/'1.(X$!'''#$:(,2$A1+$7:+71(,($A1+
5&'0&$/&,4$"+,$.1/$2,('*.,2$1+$'./,.2,2X$!'=#$5&'0&$&"=,$3,,.$(:3E,0/,2$/1$"8/,+"/'1.B$"3:(,B$-'(:(,B$.,*8'*,.0,$1+$"00'2,./X$!=#$5&'0&$&"=,$3,,.$'-7+17,+84$(/1+,2B
'.(/"88,2B$-"'./"'.,2$1+$17,+"/,2X$!='#$5&'0&$&"=,$3,,.$:(,2$'.$='18"/'1.$1A$5+'//,.$'.(/+:0/'1.($7+1='2,2$34$<0&8"*,X$!=''#$5&'0&$&"=,$3,,.$(:3E,0/,2$/1$'-7+17,+
/,-7,+"/:+,B$&:-'2'/4$1+$1/&,+$,.='+1.-,./"8$01.2'/'1.(X$1+$!='''#$5&'0&B$3"(,2$1.$<0&8"*,D($,W"-'."/'1.B$21$.1/$2'(081(,$/1$<0&8"*,D($("/'(A"0/'1.$.1.T01.A1+-".0,
/1$/&,$5"++"./4>$)22'/'1."884B$/&'($5"++"./4$OIG<$CI%$6IoGM$(0+"/0&,(B$"3+"('1.(B$1+$2,/,+'1+"/'1.$2:,$/1$/&,$:(,$1A$7"'./(B$(18=,./($1+$1/&,+$0&,-'0"8(>
";B=c <&1:82$/&,$;+12:0/$3,$01.('2,+,2$"$01.(:-,+$7+12:0/$"($-"4$3,$01=,+,2$34$/&,$J"*.:((1.$J1(($K,2,+"8$e"++"./4$)0/B$78,"(,$3,$"2='(,2$/&"/b$
!U#$<1-,$(/"/,($21$.1/$"8815$8'-'/"/'1.($1+$'.0'2,./"8$01.(,9:,./'"8$2"-"*,($1+$&15$81.*$".$'-78',2$5"++"./4$8"(/($(1$/&"/$/&,$"31=,$8'-'/"/'1.($
-"4$.1/$A:884$"7784X$".2$!Y#$%&'($5"++"./4$*'=,($(7,0'A'0$8,*"8$+'*&/($".2$"$:(,+$-"4$&"=,$1/&,+$$+'*&/($5&'0&$-"4$="+4$A+1-$(/"/,$/1$(/"/,>
K1+$5"++"./4$(,+='0,$".2$(&'77'.*$'.(/+:0/'1.($01./"0/b
<0&8"*,$+,(,+=,($/&,$+'*&/$/1$2'(01./'.:,B$"A/,+$"77+17+'"/,$.1/'0,B$("8,$1A$'/($7+12:0/($/1$".4$0:(/1-,+$5&'0&$+,A:(,($/1$"2&,+,$/1$
/&'($718'04>$$<0&8"*,$"8(1$+,(,+=,($/&,$+'*&/$/1$0&".*,B$'.$'/($(18,$2'(0+,/'1.B$/&,$.:-3,+$".2$810"/'1.($1A$/&,$2'(/+'3:/1+($":/&1+'c,2$
/1$2'(/+'3:/,$'/($7+12:0/($'.$".4$"+,">$%&'($2,/,+-'."/'1.$5'88$3,$3"(,2$:71.B$"-1.*$1/&,+$01.('2,+"/'1.(B$/&,$(:00,(($1+$A"'8:+,$'.$2,=,817'.*$/&,
-"+V,/$A1+$<0&8"*,$7+12:0/(>
Price Book 71 Terms-11
Effective April 5, 2010
TERMS & CONDITIONS • Cylinder Policies
End User Keyways - Primus / Primus XP levels 3, 4 & 9, Everest D, Everest B, Quad, Reversed, Numbered.
End user restricted keyways are manufactured and sold by Schlage for use within the end user facilities only and are not for dealer or
locksmith’s use or distribution. The facilities are described as the “ship-to” address pre-authorized by the end user via a letter of
authorization (LOA) or face sheet (depending upon the key system type).
End user keyway products may be stocked at the end user location only, unless authorized otherwise in writing by the end user. Every
new end user system, using these restricted keyways, requires prior approval from the local Ingersoll Rand Security Technologies sales
office management.
Restricted end user keyways may not be sold to any contract hardware dealer or wholesale distributor not open as a direct Schlage
account as the time of the sale, unless authorization has been granted in writing by the the local Ingersoll Rand Security Technologies
sales office management where the end user reside.
Locksmiths/ dealers’ keyways - Primus/ Primus XP levels 1, 1+, 2, 7, 8, Everest B234 & B235.
Locksmith/ dealer key section can be sold to commercial locksmiths/ dealers only.
Right to stock and sell locksmiths/ dealers restricted keyways requires the appropriate written agreement with Schlage and approval by
the local Ingersoll Rand Security Technology sale office management. Please contact you local Ingersoll Rand sale office for a copy of
these contracts and additional information.
Schlage hereby reserves the right to terminate or take any other legal action against any party that violates this policy.
H'//'.*$8'(/$!/+".(0+'7/#$1+2,+($+,9:'+,$"$8,//,+$1A$":/&1+'c"/'1.$1.$/&,$,.2T:(,+D($1AA'0'"8$(/"/'1.,+4>$;+,="'8'.*$7+'0,($"7784>
Everest D
)88$G=,+,(/$O$V,45"4($"+,$+,(/+'0/,2>$
e&,.$1+2,+'.*$"$.,5$V,4'.*$(4(/,-B$'.08:2,$/&,$A18815'.*b
h g13$!,.2T:(,+#$."-,B$0'/4B$(/"/,$".2$c'7$012,>
h R,//,+$1A$):/&1+'c"/'1.$!RI)#$p$):/&1+'c,2$(&'7T/1$"22+,(($A1+$"88$7+12:0/($1.$,.2T:(,+D($1AA'0'"8$(/"/'1.,+4>$<,,$5;?MC,h,
$NDM<J=C A1+$("-78,$8,//,+$1A$":/&1+'c"/'1.>
h C:-,+'0"884$2,A'.,2$(7,0'A'0"/'1.($A1+$,W7".('1.$1A$"88$3+".0&,($1A$/&,$V,4$(4(/,->
%&,$A"0/1+4$5'88$"(('*.$"$?A"0'8'/4$012,@$5&'0&$5'88$"77,"+$1.$"88$V,4($".2$38".V($A1+$/&'($E13>$e&,.$1+2,+'.*$"22'/'1.($/1$".
,W'(/'.*$V,4'.*$(4(/,-B$'.08:2,$/&,$A18815'.*b
h g13$!,.2T:(,+#$."-,B$0'/4B$(/"/,$".2$c'7$012,>
h K"0'8'/4$012,$7+,='1:(84$"(('*.,2$34$<0&8"*,$".2$(/"-7,2$1.$"88$,W'(/'.*$V,4($".2$38".V(>
h M,*'(/+4$.:-3,+$1A$/&,$V,4'.*$(4(/,-$"($,(/"38'(&,2$34$<0&8"*,>
h R,//,+$1A$":/&1+'c"/'1.$1.$,.2T:(,+D($1AA'0'"8$(/"/'1.,+4$'($+,9:'+,2$5&,.b
T$G.2T:(,+$78"0,($1+2,+$5'/&$.,5$2,"8,+>
T$I+2,+$'($/1$3,$2+17$(&'77,2$/1$"$2'AA,+,./$(&'7T/1$"22+,(($/&".$1+'*'."884$":/&1+'c,2$34$/&,$,.2T:(,+>
<,,$5;?MC,h,$NDM<J=C A1+$("-78,$8,//,+$1A$":/&1+'c"/'1.>
810"/'1.$c'7T012,>$O'(/+'3:/'1.$/&+1:*&$2'+,0/$<0&8"*,$2,"8,+(>$</10V'.*$8,=,8$5&'0&$+,9:'+,($"$(,7"+"/,$;+'-:($7:+0&"(,$"*+,,-,./$".2$".$'.'/'"8
-'.'-:-$'.=,./1+4$7:+0&"(,>$I3=,+(,$V,45"4($1.84>$648'.2,+($0".$3,$1+2,+,2$RmHB$mOB$m)$1+$Jm>
/%!.2&f/%!.2&,Y/,($6$(,9c K1+$<0&8"*,$2,"8,+($".2$8"+*,$01--,+0'"8$810V(-'/&$3:('.,((,(>$$GW08:('=,$('2,$3'//'.*$'($"(('*.,2$/1
2,"8,+$34$/'-,$c1.,>$O'(/+'3:/'1.$/&+1:*&$2'+,0/$<0&8"*,$2,"8,+(>$</10V'.*$8,=,8$5&'0&$+,9:'+,($"$(,7"+"/,$;+'-:($7:+0&"(,$"*+,,-,./$".2$".$
'.'/'"8$-'.'-:-$'.=,./1+4$7:+0&"(,>$I3=,+(,$V,45"4($1.84>
/%!.2&f/%!.2&,Y/,($6$(,Kc G.2$:(,+$8,=,8$.1/$(/10V,2$34$2,"8,+(>$m,4$(4(/,-($"+,$"(('*.,2$"$('2,$3'//'.*$,W08:('=,$5'/&'.$YT2'*'/$c'7$012,
!R,=,8$^S#$A1+$1+2,+($1A$f]$T$UBddd$;+'-:($048'.2,+(>$I+2,+($1A$A,5,+$/&".$f]$;+'-:($048'.2,+($"+,$+".21-84$"(('*.,2$"$('2,$3'//'.*$A+1-$
"$(-"88$."/'1.5'2,$7118$1A$('2,$3'//'.*($!R,=,8$^L#>$O'(/+'3:/'1.$/&+1:*&$<0&8"*,$2,"8,+($".2$<0&8"*,$5&18,("8,$2'(/+'3:/1+(>$I3=,+(,$".2$q:"2$V,4T
5"4($1.84>$
/%!.2&f/%!.2&,Y/,($6$(,Oc,G.2$:(,+$8,=,8$.1/$(/10V,2$34$2,"8,+(>$m,4$(4(/,-($"+,$"(('*.,2$"$('2,$3'//'.*$,W08:('=,$5'/&'.$"$/'-,$c1.,
!R,=,8$jr#$A1+$1+2,+($1A$YB]]]$T$^Bddd$;+'-:($048'.2,+(>$)$."/'1.5'2,$,W08:('=,$('2,$3'/'.*$!R,=,8$jC#$'($"(('*.,2$/1$V,4$(4(/,-($1A$jB]]]$1+$-1+,
;+'-:($048'.2,+(>$%&'($,W08:('='/4$0".$3,$7:+0&"(,2$A1+$"$(,7"+"/,$A,,$A1+$(-"88,+$9:"./'/',($1A$048'.2,+(>$%&'($7+'0,$311V$21,($.1/$01./"'.$/&,$A,,
(0&,2:8,>$61./"0/$41:+$P.*,+(188$M".2 <,0:+'/4$l$<"A,/4$61.(:8/"./$A1+$(7,0'A'0$'.A1+-"/'1.>$O'(/+'3:/'1.$/&+1:*&$<0&8"*,$2,"8,+($".2$<0&8"*,
5&18,("8,$2'(/+'3:/1+(>$I3=,+(,$".2$q:"2$V,45"4($1.84>$
/%!.2&,($6$(,Uc K1+$+,/"'8$810V(-'/&(>$<'2,$3'//'.*$'($"(('*.,2$1.$"$."/'1.5'2,$,W08:('=,$3"('($/1$"$(7,0'A'0$<0&8"*,$5&18,("8,$2'(/+'3:/1+>
</10V'.*$8,=,8$5&'0&$+,9:'+,($"$(,7"+"/,$;+'-:($7:+0&"(,$"*+,,-,./$".2$".$'.'/'"8$-'.'-:-$'.=,./1+4$7:+0&"(,$34$/&,$<0&8"*,$5&18,("8,+$".2$/&,
810V(-'/&>$<"-,$"($R,=,8$U$;RL<$"31=,B$3:/$5'/&$G=,+,(/$6$K"-'84$V,45"4($1.84>
Everest® Keyways
/%!.2&,Y/,($6$(,Uc K1+$+,/"'8$810V(-'/&(>$).$,W08:('=,$('2,$3'//'.*$'($"(('*.,2$/1$2,"8,+$5'/&'.$/&,$A'+(/$/&+,,$2'*'/($1A$1A$/&,$2,"8,+$
7&4('0"8$810"/'1.$c'7T012,>$O'(/+'3:/'1.$/&+1:*&$2'+,0/$<0&8"*,$2,"8,+(>$</10V'.*$8,=,8$5&'0&$+,9:'+,($"$(,7"+"/,$;+'-:($7:+0&"(,$"*+,,-,./$".2$".
'.'/'"8$-'.'-:-$'.=,./1+4$7:+0&"(,>$)88$G=,+,(/$V,4$(,0/'1.(>$648'.2,+($0".$$3,$1+2,+,2$JmB$m)B$mO$1+$RmH>
/%!.2&f/%!.2&,Y/,($6$(,Vc, K1+$<0&8"*,$2,"8,+($".2$8"+*,$01--,+0'"8$810V(-'/&$3:('.,((,(>$$GW08:('=,$('2,$3'//'.*$'($"(('*.,2$/1$
2,"8,+$34$/'-,$c1.,>$O'(/+'3:/'1.$/&+1:*&$2'+,0/$<0&8"*,$2,"8,+(>$</10V'.*$8,=,8$5&'0&$+,9:'+,($"$(,7"+"/,$;+'-:($7:+0&"(,$"*+,,-,./$".2$".$
'.'/'"8$-'.'-:-$'.=,./1+4$7:+0&"(,>$G9:'="8,./$/1$R,=,8$Y$"31=,B$3:/$5'/&$G=,+,(/$6$K"-'84$V,45"4($1.84>
/%!.2&f/%!.2&,Y/,($6$(,Wc G.2$:(,+$8,=,8$.1/$(/10V,2$34$2,"8,+(>$m,4$(4(/,-($"+,$"(('*.,2$="+4'.*$2,*+,,($1A$*,1*+"7&'0"884$
,W08:('=,$('2,$3'//'.*($3"(,2$1.$"$(8'2'.*$(0"8,$1A$7:+0&"(,$01--'/-,./$1+$(,7"+"/,$A,,(>$%&'($7+'0,$311V$21,($.1/$01./"'.$/&,$A,,$(0&,2:8,>$61./"0/
41:+$P.*,+(188$M".2 <,0:+'/4$l$<"A,/4$61.(:8/"./$A1+$(7,0'A'0$'.A1+-"/'1.>$O'(/+'3:/'1.$/&+1:*&$<0&8"*,$2,"8,+($".2$<0&8"*,$5&18,("8,$2'(/+'3:/1+(>
R,=,8$dLB$dSB$drB$".2$dC$"+,$,9:'="8,./$/1$R,=,8($^LB$^SB$jrB$".2$jC$"31=,B$3:/$5'/&$G=,+,(/$6$".2$O$K"-'84$V,45"4(>$
%&,$A18815'.*$('2,$3'/$-'88'.*$,W08:('='/4$0+'/,+'"$"7784$/1$31/&$8,=,8($^B$j$l$db
h UT$f]$048'.2,+(TM".21-$"(('*.-,./
h fUTUddd$048'.2,+(TK'+(/$/51$2'*'/($1A$c'7T012,
h$ Y]]]T^ddd$048'.2,+(T%'-,Tr1.,$GW08:('='/4$!)8(1$"="'8"38,$A1+$\U]B]]]$A,,$A1+$".$1+*".'c"/'1.$5&1$
51:82$8'V,$/&'($,W08:('='/4$".2$21,(.`/$.1/$-,,/$048'.2,+($9:"./'/4$+,9:'+,-,./#>
h$ j]]]$s$048'.2,+(TC"/'1.$e'2,$GW08:('='/4>!)8(1$"="'8"38,$A1+$\j]B]]]$A,,$A1+$".$1+*".'c"/'1.$5&1$51:82$
8'V,$/&'($,W08:('='/4$".2$21,(.`/$.1/$-,,/$048'.2,+($9:"./'/4$+,9:'+,-,./#>
Important Ordering Information
<,,$K1+-($l$GW"-78,(b$;+'-:($".2$G=,+,(/$;+'-:($I+2,+'.*$6&,0V8'(/$A1+$"$0&,0V8'(/$1A$'.A1+-"/'1.$+,9:'+,2$/1$7+10,(($"$;+'-:($1+2,+>$$C1/,$/&"/B$$A1+
(,0:+'/4$+,"(1.(B$"88$,.2$:(,+$;+'-:($8,=,8($!R,=,8$^B$j$".2$d#$+,9:'+,$"$K"0,(&,,/$!J<TGUY]#$3,"+'.*$".$1+'*'."8$('*."/:+,>$$I7,.'.*$1+2,+($A1+$,.2$:(,+
;+'-:($8,=,8($"8(1$+,9:'+,$"$<'*."/:+,$6"+2$!J<TGU^]#$3,"+'.*$1+'*'."8$('*."/:+,(>$K"0,(&,,/($".2$('*."/:+,$0"+2($"+,$:(,2$/1$":/&,./'0"/,$/&,$,.2$:(,+
+,9:,(/$A1+$7+12:0/B$/&,+,A1+,$1+2,+($+,0,'=,2$5'/&1:/$/&,$01++,0/$(:771+/'.*$210:-,./($!1+$5'/&1:/$1+'*'."8$('*."/:+,(#$"+,$(:3E,0/$/1$2,8"4($1+$0".0,88"T
/'1.(>$H8".V$K"0,(&,,/($".2$<'*."/:+,$6"+2($"+,$'.08:2,2$'.$/&,$K1+-($l$GW"-78,($(,0/'1.$1A$/&'($7+'0,$311V$A1+$41:+$+,A,+,.0,>$)22'/'1."884B$,8,0/+1.'0
=,+('1.$1A$/&,(,$A1+-($"+,$"="'8"38,$"/$555>(0&8"*,>01->
%&,$<0&8"*,$R10V$61-7".4$+,(,+=,($/&,$+'*&/$/1$-"V,$0&".*,($'.$2,('*.($".2$(7,0'A'0"/'1.(B$/1$-"V,$"22'/'1.($1+$'-7+1=,-,./($1.$'/($7+12:0/(B$1+$/1
2'(01./'.:,$7+12:0/($5'/&1:/$'.0:++'.*$".4$138'*"/'1.>$%&,$<0&8"*,$R10V$61-7".4$'($.1/$+,(71.('38,$A1+$".4$-12'A'0"/'1.B$"22'/'1.B$1+$"8/,+"/'1.$/1$1:+
7+12:0/($34$1/&,+(>
Buy-in Requirements-Commercial Locksmiths Levels
;+'-:($Q; G=,+,(/$;+'-:($Q;
R,=,8$U C1., Ca) Ca)
R,=,8$Us \kBZ]]$ R,=,8$k$Q; \kBZ]]$
R,=,8$Y YZB]]] R,=,8$_ \YZB]]]$
$Y-$/3!'"c O11+$8"3,8'.*$'($.1/$7+1='2,2$1.$1+2,+($(7,0'A4'.*$M,('2,./'"8$J"(/,+$m,4'.*$!MJm#$".2a1+$M,('2,./'"8$61.(/+:0/'1.
m,4'.*$!M6m#>$$PA$211+$8"3,8'.*$'($+,9:'+,2B$61./+"0/$J"(/,+$m,4'.*$".2a1+$61./+"0/$61.(/+:0/'1.$m,4'.*$0&"+*,($5'88$"7784>
)88$*112($"+,$(&'77,2$K>I>H>$A"0/1+4$".2$3,01-,$/&,$0:(/1-,+D($7+17,+/4$5&,.$/&,4$7"(($'./1$/&,$&".2($1A$/&,$/+".(71+/"/'1.$01-7".4>
<0&8"*,$+,(,+=,($/&,$+'*&/$/1$:(,$1:+$0&1'0,$1A$0"++',+>$$
Locknetics
O,A":8/$V,45"4$'($G=,+,(/$6UY^
K1+$1/&,+$17/'1."8$V,45"4(B$78,"(,$(7,0'A4
Hardware Finishes:
<0&8"*,$R10V$A'.'(&,($"+,$2:+"38,B$/17$9:"8'/4$A'.'(&,($13/"'.,2$34$/&,$0"+,A:8$7+10,(('.*$1A$(18'2$3+"((B$3+1.c,B$(/"'.8,(($(/,,8$1+
1/&,+$-"/,+'"8(>$e&,+,$+,9:'+,2B$"$7+1/,0/'=,$08,"+$01"/'.*$'($"778',2$".2$0:+,2$:.2,+$&'*&$/,-7,+"/:+,>$P/$'($'-71+/"./$/&"/$08'-"/'0
01.2'/'1.($".2$:("*,$3,$/"V,.$:.2,+$01.('2,+"/'1.$5&,.$(,8,0/'.*$A'.'(&,(>$%&'($'($,(7,0'"884$/+:,$'.$"+,"($(:3E,0/,2$/1$(/+1.*
01++1('=,$="71+(B$&:-'2$08'-"/,$1+$(,"$"'+$5&'0&B$'.$"$(&1+/$/'-,B$-"4$&"=,$"$2"-"*'.*$,AA,0/$1.$-,/"8$A'.'(&,(>$%&,$81.*,='/4$".2
7+,(,+="/'1.$1A$/&,$A'.'(&$"77,"+".0,$'($2,/,+-'.,2$34$3"(,$-,/"8$".2$A'.'(&'.*$7+10,((>$68,"+$7+1/,0/'=,$01"/'.*$1+$1/&,+$1+*".'0
A'.'(&'.*$"778'0"/'1.($-"4$+,9:'+,$2'AA,+,./$-,/&12($1A$08,".'.*$".2$0"+,>$)($".$,W"-78,B$.1.T08,"+$01"/,2$A'.'(&,($(&1:82$.1/$3,
08,".,2$5'/&$(1"7($1+$".4$(18=,./(X$1+*".'0"884$01"/,2$(:+A"0,($(&1:82$7,+'12'0"884$3,$08,".,2$5'/&$"$-'82B$.1."3+"('=,$(1"7$".2
3:AA,2$8'*&/84$5'/&$"$08,".$081/&>$%&,$/47,$1A$3"(,$-,/"8$".2$A'.'(&'.*$/,0&.'9:,($-:(/$3,$01.('2,+,2$5&,.$"7784'.*$".4$08,".'.*
1+$7+,(,+="/'=,$-,/&12>$61./"0/$/&,$<0&8"*,$%,0&.'0"8$<,+='0,($O,7"+/-,./$A1+$A:+/&,+$'.A1+-"/'1.$1.$/&,$0"+,$1A$A'.'(&,2$&"+25"+,>
P.$(1-,$'.(/".0,(B$A1+$0:(/1-,+$01.=,.',.0,B$/&,$-1(/$"77+17+'"/,$HNJ)$A'.'(&$(4-318($"+,$:(,2$/1$'.2'0"/,$('-'8"+'/4$1A$"77,"+".0,B
+,*"+28,(($1A$3"(,$-,/"8$1A$A'.'(&'.*$7+10,((>$)B$)RB$OB$COB$KB$K)B$NB$<B$<Y]]T<,+',($".2$O,W/,+$34$<0&8"*,$8,=,+($"+,$c'.0T3"(,2$-"/,+'"8
".2$"+,$78"/,2$/1$-"/0&$A'.'(&,($'.2'0"/,2>$K'.'(&,($1A$8"/0&,(B$(/+'V,(B$048'.2,+(a01+,(B$".2$='('38,$-1:./'.*$(0+,5(B$/&1:*&$('-'8"+$'.
"77,"+".0,B$-"4$2'AA,+$A+1-$/&,$A'.'(&$1A$/&,$/+'->$K'.'(&$.:-3,+($'.$/&,$f]]T<,+',($"+,$/&,$HNJ)$!H:'82,+($N"+25"+,$J".:A"0/:+,+(
)((10'"/'1.#$'.2:(/+4$(/".2"+2>
* Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different alloys
and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil rubbed
bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating.
Standard Finishes:
M,A,+$/1$,"0&$810V$(,+',($(,0/'1.$A1+$(/".2"+2$A'.'(&$"="'8"3'8'/4>$$</".2"+2$A'.'(&$"="'8"3'8'/4$="+',($2,7,.2'.*$1.$/&,$A:.0/'1.B$2,('*.$".2
17/'1.($1+2,+,2>
10-001 . . . . . . . . .A-4, A-8, AL-4, 10-092 . . . . . . . . .B500-9, B600-5, 11-118 . . . . . . . . .A-4, A-8, AL-4,
AL-9, B250-4, B600-9, H-5, H-11, AL-9
B250-5, B250-8, S200-5, S200-11 12-073 . . . . . . . . .S200-6, S200-10
B250-11, H-5, H-7, 10-094 . . . . . . . . .B500-9 12-076 . . . . . . . . .S200-10
H-11, S200-5, 10-095 . . . . . . . . .B500-9, B600-5, 12-082 . . . . . . . . .S200-10
S200-6, S200-11, B600-9, H-5, H-11, 12-100 . . . . . . . . .B250-4, B250-5,
S-4, S-9 S200-5, S200-11 B250-8
10-004 . . . . . . . . .A-4, A-5, A-8, AL-4, 10-103 . . . . . . . . . .B500-9 12-103 . . . . . . . . .B250-4, B250-8
AL-6, AL-9, 10-104 . . . . . . . . . .B500-9 12-237 . . . . . . . . .H-4, H-7, H-10
B250-4, B250-8, 10-108 . . . . . . . . .B500-9 12-238 . . . . . . . . .H-4, H-10
H-5, H-11, S-4, S-9 10-112 . . . . . . . . .B500-9 12-239 . . . . . . . . .H-4, H-10
10-013 . . . . . . . . .DK-5, DK-10, 10-250 . . . . . . . . .H-5, H-7, H-11, 12-240 . . . . . . . . .H-4, H-10
DK-14, ND-12, S200-5, S200-6, 12-287 . . . . . . . . .B500-8,
ND-15 S200-11 12-288 . . . . . . . . .B500-8
10-016 . . . . . . . . .DK-5, DK-10, 10-251 . . . . . . . . .H-5, H-11, S200-5, 12-289 . . . . . . . . .B500-8
ND-12 S200-11 12-290 . . . . . . . . .B500-8
10-025 . . . . . . . . .A-4, A-5, A-8, A-12, 10-252 . . . . . . . . .H-5, H-11, S200-5, 12-291 . . . . . . . . .B500-8
AL-4, AL-6, AL-9, S200-11 12-617 . . . . . . . . .B600-8
AL-13, B250-4, 10-253 . . . . . . . . .H-5, H-11, S200-5, 12-618 . . . . . . . . .B600-8
B250-8, B250-11, S200-11 12-625 . . . . . . . . .B600-8
DK-5, DK-6, 10-255 . . . . . . . . .H-5, H-11, S200-5, 12-626 . . . . . . . . .B500-8, B600-8
DK-10, ND-12, S200-11 12-627 . . . . . . . . .B600-9
ND-15, S-4, S-5, 10-256 . . . . . . . . .H-5, H-11, S200-5, 12-628 . . . . . . . . .B600-9
S-9, S-10 S200-11 12-630 . . . . . . . . .B600-5, B600-7,
10-026 . . . . . . . . .A-4, A-8, AL-4, 10-257 . . . . . . . . .H-5, H-11, S200-5, B600-8
AL-9, H-5, H-11, S200-11 12-631 . . . . . . . . .B600-5, B600-8
S200-5, S200-11, 10-258 . . . . . . . . .H-5, H-11, S200-5, 12-632 . . . . . . . . .B600-5, B600-8
S-4, S-9 S200-11 12-633 . . . . . . . . .B500-8, B600-5,
10-027 . . . . . . . . .A-4, A-8, AL-4, 10-259 . . . . . . . . .H-5, H-11, S200-5, B600-8
AL-9, H-5, H-11, S200-11 12-640 . . . . . . . . .B600-5, B600-8
S200-5, S200-11, 11-068 . . . . . . . . .A-4, A-8, AL-4, 12-641 . . . . . . . . .B600-5, B600-8
S-4, S-9 AL-9, H-4, H-10 12-642 . . . . . . . . .B600-5, B600-8
10-042 . . . . . . . . .A-4, A-8, AL-4, 11-069 . . . . . . . . .A-4, A-8, AL-4, 12-643 . . . . . . . . .B600-5, B600-8
AL-9, B250-4, AL-9, H-4, H-10 12-650 . . . . . . . . .B600-9
B250-8, DK-5, 11-085 . . . . . . . . .A-4, A-8, AL-4, 12-651 . . . . . . . . .B600-9
DK-10, ND-12, S-4, AL-9, H-4, H-7, 12-652 . . . . . . . . .B600-9
S-9 H-10 12-653 . . . . . . . . .B600-9
10-055 . . . . . . . . .B600-5, B600-9, 11-088 . . . . . . . . .A-4, A-8, AL-4, 13-047 . . . . . . . . .ND-6, ND-9, ND-13
H-5, H-7, H-11, AL-9, H-4, H-10 13-048 . . . . . . . . .ND-6, ND-13
S200-5, S200-6, 11-091 . . . . . . . . .A-4, A-8, AL-4, 14-001 . . . . . . . . .DK-5, DK-10
S200-11 AL-9, H-4, H-10 14-010 . . . . . . . . .DK-5, DK-10,
10-058 . . . . . . . . .A-4, A-8, AL-4, 11-092 . . . . . . . . .A-4, A-8, AL-4, ND-6, ND-13
AL-9, AL-9, H-4, H-10 14-019 . . . . . . . . .DK-5, DK-6, DK-10
H-5, H-11, S200-5, 11-096 . . . . . . . . .A-4, A-5, A-8, 14-028 . . . . . . . . .DK-5, DK-10,
S200-11 AL-4, AL-6, AL-9 ND-6, ND-13
10-064 . . . . . . . . .B500-4 11-103 . . . . . . . . .A-4, A-8, AL-4, 14-042 . . . . . . . . .DK-5, DK-10,
B500-9, B600-5, AL-9 ND-6, ND-13
B600-7, B600-9, 11-104 . . . . . . . . .A-4, A-8, AL-4, 14-047 . . . . . . . . .DK-5, DK-10,
H-5, H-11, S200-5, AL-9, H-4, H-10 ND-6, ND-13
S200-11 11-105 . . . . . . . . .A-4, A-8, AL-4, 14-048 . . . . . . . . .DK-5, DK-10,
10-072 . . . . . . . . .L-20, L-23, L-30, AL-9, H-4, H-10 ND-6, ND-13
L-35, L-42 11-110 . . . . . . . . .A-4, A-8, AL-4, 16-132 . . . . . . . . .S200-10,
10-073 . . . . . . . . .L-20, L-35 AL-9, H-4, H-10 S-4, S-9
10-075 . . . . . . . . .L-20, L-35 11-111 . . . . . . . . .A-4, A-8, AL-4, 16-203 . . . . . . . . .S-4, S-9
10-078 . . . . . . . . .L-21, L-35 AL-9, H-4, H-10 16-204 . . . . . . . . .S-4, S-5, S-9
10-079 . . . . . . . . .L-21, L-35 11-112 . . . . . . . . .A-4, A-8, AL-4, 16-228 . . . . . . . . .S200-6, S200-10
10-081 . . . . . . . . .B/BA300-4 AL-9, H-4, H-10 16-230 . . . . . . . . .S200-6, S200-10
10-087 . . . . . . . . .B/BA300-4, 11-113 . . . . . . . . .A-4, A-8, AL-4, 16-231 . . . . . . . . .S200-10
B500-9, B600-5, AL-9, H-4, H-10 16-232 . . . . . . . . .S200-10
B600-9 11-116 . . . . . . . . .A-4, A-8, AL-4,
10-091 . . . . . . . . .L-35 AL-9
A590-159 . . . . . . .A-11, AL-11, H-13 B202-558 . . . . . . .B250-11, CYL-18, B502-292 . . . . . . .CYL-5, CYL-29,
A590-180 . . . . . . .A-11, AL-11 CYL-17 CYL-31
A590-181 . . . . . . .A-11, AL-11, H-13 B202-560 . . . . . . .B250-11 B502-310-604 . . .CYL-40
A700-003 . . . . . . .AL-11 B202-580 . . . . . . .B250-11, CYL-15, B502-380 . . . . . . .CYL-29, CYL-31
A700-004 . . . . . . .AL-11 CYL-18, CYL-19, B502-468 . . . . . . .CYL-31, CYL-47
A700-006 . . . . . . .AL-11 CYL-27 B502-486 . . . . . . .CYL-45
A700-007 . . . . . . .AL-11 B202-671 . . . . . . .B250-6 B502-711 . . . . . . .B250-6
A700-014 . . . . . . .AL-11, AL-12 B202-672 . . . . . . .B250-6 B502-815 . . . . . . .B250-6
A700-015 . . . . . . .AL-11 B202-824 . . . . . . .CYL-16 B502-899 . . . . . . .CYL-40
A700-017 . . . . . . .AL-11 B202-825 . . . . . . .CYL-16 B502-907 . . . . . . .CYL-38
A700-019 . . . . . . .AL-8 B202-957 . . . . . . .CYL-15, CYL-18, B502-942 . . . . . . .CYL-31, CYL-47
A700-021 . . . . . . .AL-8 CYL-19, CYL-27 B502-943 . . . . . . .CYL-31, CYL-52
A700-023 . . . . . . .CYL-6, CYL-10 B220-001 . . . . . . .CYL-40 B502-944 . . . . . . .CYL-5, CYL-29,
A700-028 . . . . . . .AL-12 B220-006 . . . . . . .CYL-53 CYL-31
A700-029 . . . . . . .AL-12 B220-032 . . . . . . .CYL-18, CYL-19, B502-945 . . . . . . .CYL-29, CYL-31
A700-030 . . . . . . .AL-12 CYL-25, CYL-26 B502-946 . . . . . . .CYL-45
A700-031 . . . . . . .CYL-3, CYL-5, B220-036 . . . . . . .CYL-18 B502-948 . . . . . . .CYL-5, CYL-28,
CYL-6, CYL-10, B220-043 . . . . . . .B250-11 CYL-30, CYL-31,
CYL-38 B220-050 . . . . . . .CYL-5, CYL-29, CYL-38, CYL-47
A700-032 . . . . . . .AL-12, AL-13 CYL-33, CYL-35 B502-949 . . . . . . .CYL-18, CYL-26
A700-033 . . . . . . .AL-12 B220-108 . . . . . . .CYL-53 B502-998 . . . . . . .S200-12
A700-034 . . . . . . .AL-12 B220-117 . . . . . . .CYL-53 B502-999 . . . . . . .CYL-16, CYL-19,
A700-036 . . . . . . .AL-11 B220-122 . . . . . . .CYL-38 S200-12
A700-039 . . . . . . .AL-11 B220-146 . . . . . . .CYL-47 B520-086 . . . . . . .B250-10, B250-11
A700-041 . . . . . . .AL-11 B220-201 . . . . . . .CYL-27 B520-087 . . . . . . .B250-10
A700-043 . . . . . . .AL-12 B220-203 . . . . . . .CYL-27 B520-153 . . . . . . .CYL-40
A700-044 . . . . . . .AL-11 B220-264 . . . . . . .CYL-53 B520-219 . . . . . . .CYL-18
A700-045 . . . . . . .AL-11 B220-265 . . . . . . .CYL-53 B520-223 . . . . . . .CYL-46
A700-046 . . . . . . .AL-11, AL-12 B220-266 . . . . . . .CYL-53 B520-233 . . . . . . .CYL-46
A700-047 . . . . . . .AL-11 B220-267 . . . . . . .CYL-53 B520-235 . . . . . . .CYL-17, CYL-27
A700-048 . . . . . . .AL-12 B220-268 . . . . . . .CYL-53 B520-236 . . . . . . .CYL-18, CYL-19
A700-049 . . . . . . .AL-12 B220-280 . . . . . . .CYL-53 B520-237 . . . . . . .CYL-18, CYL-19
A700-050 . . . . . . .AL-12 B220-282 . . . . . . .CYL-53 B520-240 . . . . . . .CYL-17, CYL-25,
A700-051 . . . . . . .AL-12 B220-284 . . . . . . .CYL-53 CYL-27
A700-056 . . . . . . .AL-11, AL-12 B220-300 . . . . . . .CYL-38 B520-242 . . . . . . .CYL-18, CYL-19,
A700-057 . . . . . . .AL-11, AL-12 B220-312 . . . . . . .CYL-38 S200-12
A710-001 . . . . . . .AL-11 B300-108 . . . . . . .CYL-21 B520-243 . . . . . . .CYL-18, CYL-19,
A710-004 . . . . . . .AL-11 B300-111 . . . . . . .CYL-21 S200-12
A710-007 . . . . . . .AL-11 B300-118 . . . . . . .CYL-21 B520-253 . . . . . . .CYL-46
A710-008 . . . . . . .AL-11 B300-120 . . . . . . .CYL-21 B520-254 . . . . . . .CYL-46
A710-011 . . . . . . .AL-11 B300-130 . . . . . . .CYL-21 B520-256 . . . . . . .CYL-46
A710-012 . . . . . . .AL-11 B300-203 . . . . . . .CYL-21 B520-267 . . . . . . .B250-10, B250-11
A710-020 . . . . . . .AL-11 B300-210 . . . . . . .CYL-21 B520-268 . . . . . . .B250-10
B300-211 . . . . . . .CYL-21 B520-269 . . . . . . .B250-10, B250-11
B302-001 . . . . . . .CYL-21 B520-271 . . . . . . .B250-10, B250-11
B B302-002 . . . . . . .CYL-21 B520-283 . . . . . . .B500-9, B600-9
B202-267 . . . . . . .CYL-18, CYL-19 B302-020 . . . . . . .CYL-10 B520-295 . . . . . . .CYL-46
B202-269 . . . . . . .CYL-18, CYL-19, B302-041 . . . . . . .B500-8 B520-296 . . . . . . .CYL-46
CYL-26 B302-043 . . . . . . .CYL-15 B520-298 . . . . . . .B500-11, CYL-16,
B202-328 . . . . . . .CYL-40 B302-045 . . . . . . .B500-8 CYL-24, CYL-26
B202-339 . . . . . . .CYL-45 B302-220 . . . . . . .CYL-20 B520-309 . . . . . . .CYL-46
B202-369 . . . . . . .B250-11, CYL-18, B302-420 . . . . . . .CYL-20 B520-329 . . . . . . .CYL-46
CYL-19 B302-430 . . . . . . .CYL-20 B520-360 . . . . . . .CYL-46
B202-370 . . . . . . .B250-11, CYL-18, B500-304 . . . . . . .CYL-21 B520-361 . . . . . . .CYL-40
CYL-19, CYL-25 B500-305 . . . . . . .CYL-21 B520-366 . . . . . . .CYL-46
B202-453 . . . . . . .CYL-18, CYL-19, B500-306 . . . . . . .CYL-21 B520-367 . . . . . . .CYL-46
CYL-25, CYL-27 B502-191 . . . . . . .CYL-5, CYL-28, B520-375 . . . . . . .CYL-18, CYL-26
B202-509 . . . . . . .B250-11 CYL-30, CYL-31, B520-378 . . . . . . .CYL-33, CYL-35
B202-517 . . . . . . .AL-13, B250-11, CYL-38, CYL-47 B520-407 . . . . . . .CYL-44
DK-14, ND-17 B502-200 . . . . . . .CYL-40 B520-408 . . . . . . .CYL-44
B202-557 . . . . . . .CYL-18, CYL-25, B502-209 . . . . . . .CYL-40 B520-409 . . . . . . .CYL-44
CYL-26 B520-483 . . . . . . .CYL-35
Bold page numbers reflect pages with pricing
Table of Contents
Where to Send Orders . . . . . . . . . . . . . Forms-1
How to Determine Hand of Door . . . . . . Forms-1
How to Determine Hand of Parts
(Handed Levers) . . . . . . . . . . . . . . . . . . Forms-1
How To Order Forms-2
Ordering Examples Forms-3
Sample Letter of Authorization
for Everest® Restricted Products Forms-4
Order Forms Forms-6
Using Order Forms . . . . . . . . . . . . . . . . Forms-6
Sequential List of Order Forms . . . . . . . Forms-6
* Primus facesheets and signature cards must be mailed to Primus Order Processing.
Note: 1) Failure to use the above fax numbers or mailing addresses will delay
processing of your order.
To order Schlage products, descriptive data should be in the same sequence as shown:
How to Determine Hand of Door How to Determine Hand of Parts (Handed Levers)
9. LATCH: Latch. Leave blank for standard or specify part number if non-standard latch is required. LLL=Less Latch.
10. S TRIKE: Strike. Leave blank for standard or specify part number if non-standard strike is required. LLL=Less Strike.
11. DR THK: Door Thickness. Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4", 212=2 1/2".
12. EXT: Extension. Enter one of the following when doors 2" thick or greater are specified:
EE = Extended Equally
EI = Extended Inside
EO = Extended Outside
ED = Extended Differently
EI or EO assumes the latch will be centered on a 1 3/4" door, to which material has been added.
13. DIM: Enter dimension for non-standard strike lip length and mortise cylinder or blocking ring length.
012 = 1/8" 118 = 1 1/8"
018 = 3/16" 114 = 1 1/4"
025 = 1/4" 138 = 1 3/8"
031 = 5/16" 112 = 1 1/2"
037 = 3/8" 158 = 1 5/8"
050 = 1/2" 134 = 1 3/4"
078 = 7/8" 200 = 2"
100 = 1" 400 = 4"
14. ADDITIONAL DETAILS : Enter detail for keying information and for special requirements.
One D-Series classroom lock with Orbit interchangeable core knob for a 2 1/4˝ thick door, extended equally, E keyway.
Also furnish one control key blank.
2 1 D70RD ORB 626 RH 214 EE 138 E-111111
3 1 35-056 E section
Two AL-Series entrance locks with Saturn levers in US 10B with knurling on the outside, tamper resistant screws and
keyed alike.
4 2 AL53PD 8SA 613 SAT KA, Torx screws
One S-Series storeroom lock with Saturn levers in 612, four keys per lock.
5 1 S80PD SAT 612 4 keys total
6 2 50-215 Charge for extra cut keys
One L-Series passage lock with 05L 630 trim, with lead lined chassis.
7 1 L9010 05L 630 RH Lead lined per XL11-515
One B600-Series single cylinder deadbolt in US 26D outside, US 3 inside, less the strike, with construction core. No control
or change keys.
8 1 B660T 626 LLL ICX
9 1 50-231 Handling Charge
One ND-Series lever lock in RHO 612, classroom function on the outside, storeroom on the inside. Construction and master
keyed to new system. Furnish one master key and one construction master key.*
10 1 ND70x80PD RHO 612 Per XN12-006
11 1 49-101 Master Key
12 1 48-104 Construction Master key
13 2 50-210 Master keying charge (1/cyl)
14 2 50-211 Constr. keying charge (1/cyl)
One A-Series lock with an Orbit knob in US 3, entrance function, and Primus level 1 cylinder, CP keyway, 0-bitted, no keys.
15 1 A53LD ORB 605
16 1 20-724 606 122 Primus #000367,
CP-000000, LKB
One mortise cylinder, 1 1/4˝ long, which will operate a Von Duprin exit device
17 1 20-001 626 114
One hotel function L-Series lock with 17B trim in 625, large bow change keys and one large bow emergency key,
F section, 0-bitted. Left hand door.
18 1 L9485P 17B 625 LH F-000000, 35-141 Keys
19 2 50-228 Charge for large bow
keys substituted for
standard bow keys
20 1 35-101 F section
* Use Master Keyed order form and Key System Summary when ordering.
Jones Elementary School is to be keyed using a new Everest D Restricted Key System. For security
reasons, we would like to have all keys for this facility shipped to a location other than the job site. Master
keyed products, however, can be shipped directly to the site. This letter authorizes Schlage to ship our
restricted products to the following addresses:
These two addresses above serve as our only authorized shipment addresses for all orders placed for our
facility. We understand that this letter will be kept on file and referenced for our future orders and that a
new letter is only required to add, remove, or change authorized shipping locations.
Sincerely,
(79%*;$3
'$@3$;$7#"#.J$
H.:7"#83$%%&
End User Representative '()*+'(!
Facilities Manager
K$##$3%2"0%<$%2"./$9%>3%C"D$9%#>%H-F/":$
H-F/":$%'$;#3.-#$9%539$3%L3>-$;;.7:
MNOO%P"7->-A%(D@3$;;Q"0
4>/>3"9>%H@3.7:;R%45%NSOTT
IMPORTANT NOTES
For Level One Plus and 7, All Cylinder Orders Will Be Supplied LESS KEYBLANKS Unless
Otherwise Specified
For All Other Levels, All Cylinder Orders Will Be Supplied WITH KEYBLANKS Unless
Otherwise Specified
✓ The Distributors Primus number MUST be ✓ The Distributors Primus number MUST be
provided provided
✓ The Sequence number MUST be provided ✓ The Locksmiths Facility code MUST be
provided
FOR LEVEL ONE PLUS ✓ The Keyway MUST be provided
✓ The Dealers Primus number MUST be ✓ The Distributors Primus number MUST be
provided provided
✓ The Sequence number and/or Section MUST ✓ The Keyway MUST be provided
be Provided
✓ Orders Originating a System MUST include ✓ Orders Originating a System MUST include
both an Original Facesheet and a Signature both an Original Facesheet and a Signature
Card Card
✓ An Original Facesheet MUST accompany all ✓ An Original Primus Facesheet MUST
succeeding orders accompany all succeeding orders
✓ The Primus number MUST be indicated on ✓ The Primus number MUST be indicated on
the Facesheet the Facesheet
✓ ALL fields on the Facesheet MUST be ✓ ALL fields on the Facesheet MUST be
completed where applicable completed where applicable
PHONE:
PAGE 1 OF:
P.O. NUMBER:
SHIPPING INSTRUCTIONS:
STANDARD: ❑ UPS GROUND OR FREIGHT
OPTION: ❑ UPS 3 DAY (additional charge)
❑ UPS 2 DAY (additional charge)
❑ UPS NEXT DAY (additional charge)
OTHER:
8&93.*&2(:$;)*<#-.)$ 8&+)<<&$2&2(:$;)*<#-.)$(-)(!"&+0(/=>(?)7
LINE OUTSIDE INSIDE
ITEM QTY SKU NO. PRODUCT DES FIN DES FIN HAND LATCH STRIKE DIM DETAIL
!"#$%&'()*(+#$+&,,#-.)$'(-)(/-)+0(1*)23+-' )*2&*'(4.,,($)-(5&(#++&6-&27
8&93.*&2(:$;)*<#-.)$ 8&+)<<&$2&2(:$;)*<#-.)$(-)(!"&+0(/=>(?)7
LINE OUTSIDE INSIDE
ITEM QTY SKU NO. PRODUCT DES FIN DES FIN HAND LATCH STRIKE DIM DETAIL
SHIPPING INSTRUCTIONS
Non-Master Keyed
ORDER
REQUESTED SHIPDATE MARK CARTONS: ACCOUNT NO. P.O. NO. DATE
Phone:
Fax:
Page 1 of
1 Ingersoll-Rand
250 2 1
L INE OUTSIDE INSIDE DR A DDITIONAL DETAILS
ITEM QTY P RODUCT DES FIN DES FIN HAND L ATCH S TRIKE THK E XT DIM Use for Key Section and Bitting Information,
KA Groups, Primus® No., Locksmith ID No., etc.
Notes:
1 Ingersoll-Rand Company
2 3 1
1 Ingersoll-Rand
Master Keyed Order Add'l Page
MS-I150 2 1
Page __________ of __________
Account # P.O. #
K E Y SYST E M S U M M A RY
PART 1 Job Name
Job Information City State Zip
HELPFUL HINTS Country
!" /233"2)":30)+9"$&7"$09*.7"&7(.7"C7&1.992)<K
PART 2 SYSTEM TYPE NEW EXISTING
System Definition MASTER KEYING
Classic Master Keyed Original Order # R#
HELPFUL HINTS Classic Primus® Master Keyed Original Order # R#
!" #$"%&'"(&")&*"+)&,"*-."/01232*%"4&(.5" Facesheet attached (All level 3 & 4 orders)
6728'9")'8:.75";.<29*7%")'8:.7"=;>?5" Signature Card attached (New level 3 & 4 orders) Primus # Level
&7"*-."&72<2)03"$01*&7%"&7(.7")'8:.7"$&7" Everest® B Family Master Keyed – Small Format IC Original Order # R#
0)".@29*2)<"9%9*.85"1&)*01*"4'9*&8.7" Letter of authorized ship-to address attached
A.7B21."C72&7"*&"C3012)<"*-."&7(.7D (New systems & change of address on existing systems) Facility Code
Everest C Family Master Keyed – Open Original Order # R#
@&,7 ABCDDBCEFBACGE
Everest D Family Master Keyed – Restricted Original Order # R#
H#I(ABCDDBEJKBDGGL Letter of authorized ship-to address attached
!" E.,"9%9*.89"$&7"FGC2)"A8033"/&780*"#4" (New systems & change of address on existing systems) Facility Code
HB.7.9*" I"/0823%"7.J'27."C72&7" Everest Primus Master Keyed Original Order # R#
0CC7&B03":%"#;"A.1'72*%"0)("A0$.*% Facesheet attached (All level 9 orders)
Signature Card attached (New level 9 orders) Primus # Level
4&)9'3*0)*K
Residential Master Keyed – RMK Original Order # R#
!" L)3%"1&8C0*2:3."9%9*.8"*%C.9"80%":."
&7(.7.("&)"*-."908."C'71-09."&7(.7K CONSTRUCTION KEYING
A.."4&8C0*0:232*%"4-07*K Full Size Construction Cores IC (A, B or C)
(For Full Size IC locks and cylinders)
!" 4309921"7.$.79"*&"L:B.79.5"E'8:.7.("
Small Format Construction Cores (B or G) RN
=60701.)*721?5"M'0(5"0)(";.B.79."+.%" (For Small Format IC locks and cylinders)
9.1*2&)"$08232.9K
Construction Keyed – CK Original Order # R#
!" 4309921"6728'9"7.$.79"*&"6728'9"L:B.79." (Split Key Method, not available for Primus and IC)
0)("6728'9"M'0("+.%"9.1*2&)"$08232.9K Residential Construction Keyed – RCK Original Order # R#
(Lost Ball Method, 5 pin C only)
COMPATIBILITY CHART
KEY SECTION FAMILY
CLASSIC CLASSIC EVEREST EVEREST PRIMUS
SYSTEM TYPES 5-PIN 6-PIN PRIMUS B FAMILY C FAMILY D FAMILY C FAMILY D FAMILY
Master Keying
Classic
Primus
Everest B Family
Everest C Family
Everest D Family
Everest Primus
Residential, 5-Pin C Keyway Only
Construction Keying
Full Size Construction Cores
Small Format Construction Cores
Split Key
Residential, 5-Pin C Keyway Only
STAMPING INSTRUCTIONS
Stamp keys: With industry standard key symbol Do Not Duplicate (DND) With key stamping die XQ
Non standard code
Stamp cylinder: With industry standard key symbol Non standard code
Cylinder stamping location: Plug face (Not available for Primus) – VKC Concealed – CKC
HELPFUL HINTS CK (Split Key) Everest C Family and D Family Construction Key 48-008
!" 4&)9*7'1*2&)"+.%9"07."C01+.("2)"3&1+" Classic Construction Key 48-104
107*&)"1&)*02)2)<"C01+2)<"932CK Everest and Classic Extractor Tool 35-057
!" 4&)9*7'1*2&)"+.%9"07.")&*"$'7)29-.("
')3.99"9C.12$2.(K Full Size Construction Cores Construction Key 48-101
!" AC32*"+.%"1&)9*7'1*2&)"+.%2)<"29")&*"0B0230:3. Control Key 48-056
$&7"4309921"6728'9"&7"HB.7.9*"6728'9"
Small Format Construction Cores Construction Key 48-310
(Best® Style) Control Key 48-311
Control Keys
Control Key (except Hotel) N/A 49-056 49-158** N/A 49-003 49-003 49-005
Control Key, unembossed (except Hotel) N/A 49-076 49-052 49-356 N/A N/A 49-020
Control Key, Hotel N/A 49-056 N/A N/A 49-016 49-016 N/A
Emergency Keys
Emergency Key, Standard Bow N/A 49-102 N/A N/A 49-007 49-007 N/A
Emergency Key, Large Bow N/A 49-142 N/A N/A N/A N/A N/A
* For LP section, specify 49-171. **For LP section, specify 49-172.
Note: Specify key type and check box Do Not Duplicate.
Classic or Classic Primus or
Everest Everest Primus
Part # Part # Level Qty. Per Master Key Symbol(s) = Total Quantity
Emergency . . . EM EM
Others . . . . . . .
PART 8 Cross-keyed Cylinder is operated by these change keys Cross-keyed Cylinder is operated by these change keys
Operating Instructions
X ________ ____________________________________ X ________ ____________________________________
HELPFUL HINTS X ________ ____________________________________ X ________ ____________________________________
!" 47&99"+.%2)<"7.('1.9"*-."
9.1'72*%"0)(".@C0)92&)"&$" X ________ ____________________________________ X ________ ____________________________________
+.%"9%9*.89K
X ________ ____________________________________ X ________ ____________________________________
!" N)3.99"&*-.7,29."9C.12$2.(5"
033"-2.7071-2103"809*.7"+.%9" X ________ ____________________________________ X ________ ____________________________________
,233"&C.70*."17&99G+.%.("
1%32)(.79K X ________ ____________________________________ X ________ ____________________________________
NAME:
PHONE:
FAX:
SC-5236
IF SOLD TO ANY ENTITY/INDIVIDUAL OTHER THAN END-USER SPECIFY NAME:
Ingersoll Rand Security Technologies
Schlage
Attn.: Primus Order Processing
3899 Hancock Expressway
Security, CO. 80911
THIS ORIGINAL FORM MUST BE MAILED TO SCHLAGE COMMERCIAL DIVISION WITH YOUR ORDER
– FAXED COPIES NOT ACCEPTABLE –
PRIMUS SECURITY LEVEL:
3U (no exclusivity) 4Z (time exclusivity) 9U (no exclusivity) 9Z (time exclusivity)
3G (2-digit zip exclusivity) 4N (nationwide exclusivity) 9G (2-digit zip exclusivity) 9N (nationwide exclusivity)
PROJECT INFORMATION
1.
2.
3.
4.
5.
— OVER —
DEALER OF LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE)
Contact 1 Signature
Effective From: to
Date Date
SPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signature
authorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibility
for validating the owner’s signature as identified on the Primus Signature Card before ordering
the material.
SPECIAL INSTRUCTIONS: Please indicate any restrictions to authorized individuals listed on this form when purchasing
additional Primus product or duplicating keys.
Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send with letter
requesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distributors
and Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax of
this card will not be accepted.
© 2002 Ingersoll-Rand
MS-E130 Rev. 8/05
SCHLAGECUSTOMPRODUCTREQUESTFORM
Please fax this request
Please to your
fax this IR Security
request to your
Ingersoll &IRSafety
Rand Consultant
Security Consultant
& Safety (see other side) (see other side)
1 1
2 2
3 3
4 4
5 5
6 6
Product Application:
Product Application:
No Yes: No
Qty. required
Yes: beyond
Qty. required
this order:
beyond
Year
this1order: Year
Yr. 2 1 Yr.
Yr.3 2 Yr. 3
Acknowledgement
Acknowledgement
of this requestofwill
thisbe
request
given within
will be10
given
business
withindays
10 business days
© 2003 Ingersoll-Rand
© 2003 Ingersoll-Rand Compa
Company
MS-S100 MS-S100
Rev. 5/03 Rev. 5
Ingersoll Rand Security Technologies Consultants
Canada
3 and Latin America
British
4 Columbia
Richmond, BC V7A 4V4
sscbritishcolumbia@irco.com
5
604-272-5222
Alberta
6
Calgary, AB T2E 7T1
ssccalgary@irco.com
403-287-1190
Product Application:
Alberta
Edmonton, AB T5V 1J7
sscedmonton@irco.com
780-451-1641
Building Type: Medical Educational Hospitality Office
Saskatchewan/Manitoba
Winnipeg,
Quantity MB required
R3E 2V2 on this order: Delivery date required:
sscwinnipeg@irco.com
204-786-6355
Will requirements for this Custom Product be ongoing? (please select from the options below)
Ontario
Mississauga,
No ON L5E 1E4 Qty. required beyond this order: Year 1
Yes: Yr. 2 Yr. 3
sscontario@irco.com
905-403-1800
Does product give Schlage a proprietary specification advantage?
877-590-4734 No Yes
Quebec
Competing
Montreal, PQ H2Bvendor
1Z5 and competing product:
sscquebec@irco.com
514-385-0005
Competitor’s pricing:
Other products pulled through on order:
©©2005
2003Ingersoll Rand Company
Ingersoll-Rand Company
MS-S100
MS-S100 Rev. 11/05
Rev. 5/03
Commercial Portable Security
Custom Logo Request (CLR) Form
Date: Requestor:
Phone: ( ) Fax: ( ) E-mail:
This request is for the inclusion of a Customer’s specific logo onto the Portable Security Padlocks through
the use of laser engraving. This request is to include an electronic copy of customer’s artwork in Line Art form in
DXF, EPS, or PDF format. DXF is preferred. Up to 2 approval samples will be supplied at no charge. Additional
samples required will be charged at 50% off list price.
CLR #
Request Response (completed by CLR Coordinator)
Approved
Declined. Reason:
Item Quantity Product Finish Net Price Each Extended Net Price
1 $ $
2 $ $
3 $ $
4 $ $
Approvals:
Technical Services.: Date:
Customer: Date:
Cylinders (Cont.)
Cylinder Price
Mechanism Product Finish Dim Detail SKU No. Each
S-Series
Classic 21-028 626 — KD C S00000114493 $49.00
Conventional
Everest® 21-028 626 — KD C123 043156997640 49.00
Conventional
Mortise Cylinders - Adams Rite® MS, 4500 and 4700 Series
20-013 613 118 KD C 043156933044 $57.00
Classic
Conventional 20-013 626 118 KD C 043156930203 57.00
20-013 626 118 KA C 000000 043156757497 57.00
Everest 20-013 613 118 KD C123 043156757503 57.00
Conventional 20-013 626 118 KD C123 043156757510 57.00
Housing Less 20-060 626 — — S00000552479 42.00
Full Size Core
Housing Less
Small Format 80-103 626 — — S00021690990 58.00
Core
Mortise Cylinders - Straight Cam
20-001 613 118 KA C 000000 043156989355 $57.00
20-001 626 118 KA C 000000 043156989348 57.00
Classic 20-001 626 118 KD C 043156930128 57.00
Conventional 20-001 626 118 KA E 000000 043156989317 57.00
20-001 626 114 KD C 043156963515 57.00
20-001 605 118 KA C 000000 043156757527 57.00
20-001 626 114 KA C 000000 043156927883 57.00
20-001 626 118 KA C123 000000 043156994656 57.00
20-001 626 114 KA C123 000000 043156994649 57.00
Everest 20-001 605 118 KD C123 043156757534 57.00
Conventional 20-001 613 118 KD C123 043156757541 57.00
20-001 626 114 KD C123 043156757558 57.00
20-001 626 118 KD C123 043156757565 57.00
Housing Less
20-059 626 — — S00000107952 42.00
Full Size Core
Housing Less
Small Format 80-102 626 — — S00021743429 58.00
Core
Rim Cylinders
20-022 605 — KD C 043156933075 $51.00
20-022 613 — KD C 043156933099 51.00
20-022 626 — KA C 000000 043156989324 51.00
Classic 20-022 626 — KD C 043156933105 51.00
Conventional
20-022 626 — KA E 000000 043156989331 51.00
20-057 626 — KA C 111111 043156985876 92.00
20-057 626 — KA E 111111 043156935741 92.00
20-022 626 — KA C123 000000 043156994045 51.00
20-022 626 — KA C145 000000 043156994069 51.00
20-022 605 — KD C123 043156757572 51.00
Everest
Conventional 20-022 613 — KD C123 043156757589 51.00
20-022 626 — KD C123 043156757596 51.00
20-057 626 — KA C123 111111 043156757602 92.00
20-057 626 — KA C145 111111 043156994076 92.00
Cylinders (Cont.)
Cylinder Price
Mechanism Product Finish Dim Detail SKU No. Each
Bulk Pack Mortise Cylinder Cams and Collars
Classic 09-420 — — Straight cam 043156994908 $18.00
Conventional 09-421 — — L-Series cam 043156994915 18.00
Everest 09-761 — — Straight cam 043156994939 18.00
Conventional 09-762 — — L-Series cam 043156994946 18.00
— 09-419 626 — Compression ring & spring 043156994960 58.30
Blocking and Compression Rings
36-082 626 012 1/8” Long Blocking Rings S00000251884 $7.70
36-082 626 025 1/4” Long Blocking Rings S00000124720 7.70
—
36-082 626 037 3/8” Long Blocking Rings 043156940936 7.70
36-083 626 — Compression ring and spring S00000157094 6.50
Plugs, Key-in-Knob/Lever, Deadlock and Rim
33-006 606 — E, 6-Pin 043156929481 $26.40
Classic
33-006 626 — E, 6-Pin 043156930456 26.40
Conventional
33-006 626 — F, 6-Pin 043156930470 26.40
Pins, Full Size Cylinders (Order in multiples of 100)
34-101 — — Top, #1 043156341016 $0.08
34-102 — — Top, #2 043156341023 0.08
34-103 — — Top, #3 043156341030 0.08
34-202 — — Master, #2 043156342020 0.08
34-203 — — Master, #3 043156342037 0.08
34-204 — — Master, #4 043156342044 0.08
34-205 — — Master, #5 043156342051 0.08
34-206 — — Master, #6 043156342068 0.08
34-207 — — Master, #7 043156342075 0.08
Full Size 34-208 — — Master, #8 043156342082 0.08
34-209 — — Master, #9 043156342099 0.08
34-300 — — Bottom, #0 043156343003 0.08
34-301 — — Bottom, #1 043156343010 0.08
34-302 — — Bottom, #2 043156343027 0.08
34-303 — — Bottom, #3 043156343034 0.08
34-304 — — Bottom, #4 043156343041 0.08
34-305 — — Bottom, #5 043156343058 0.08
34-306 — — Bottom, #6 043156343065 0.08
34-307 — — Bottom, #7 043156343072 0.08
34-308 — — Bottom, #8 043156343089 0.08
34-309 — — Bottom, #9 043156343096 0.08
Sitemaster 200®
Product Finish Detail SKU No. Price Each
SM01-210 — Key record form (order in multiples of 50) 043156952724 $0.32
SM01-287 — Windows: Full Version on CD 043156974108 2,546.00
50-280 — Upgrade SiteMaster 3.0 Demo to Full Single User S00028855835 2,546.00
50-281 — Upgrade SiteMaster Full Single User to Multi User S00028855842 1,015.00
Note: 1) “C123” in Detail column denotes Everest® cylinder. For additional cylinder options, see Cyl i nders.
Notes: 1) “C123” in Detail column denotes Everest® cylinder. For additional cylinder options, see Cyl i nders.
2) To order ANSI strike boxes separately at no-charge to complement locks with 10-025 strikes, indicate on
order form.
Note: 1) To order ANSI strike boxes separately at no-charge to complement locks with 10-025 strikes,
indicate on the order form.
B500-Series
Product Design Finish Hand Latch Strike Detail SKU No. Price Each
B560 - Single Cylinder Deadbolt
B560P - 605 - 12-287 10-094 KA 4 C 043156120185 $65.00
B560P - 605 - 12-288 10-094 KA 4 C 043156118885 65.00
B560P - 605 - 12-288 10-094 KD C 043156116430 65.00
B560P - 609 - 12-288 10-094 KA 4 C 043156118908 65.00
B560P - 609 - 12-288 10-094 KD C 043156116447 65.00
B560P - 619 - 12-287 10-094 KA 4 C 043156120208 65.00
B560P - 619 - 12-288 10-094 KA 4 C 043156118939 65.00
B560P - 619 - 12-288 10-094 KD C 043156116478 65.00
B560P - 626 - 12-287 10-094 KA 4 C 043156120192 59.00
B560P - 626 - 12-288 10-094 KA 4 C 043156118892 59.00
B560P - 626 - 12-288 10-094 KD C 043156115723 59.00
B560P - 605 - 12-288 10-094 KA 4 C123 043156120093 65.00
B560P - 605 - 12-288 10-094 KD C123 043156120031 65.00
B560P - 609 - 12-288 10-094 KD C123 043156120062 65.00
B560P - 619 - 12-288 10-094 KA 4 C123 043156120116 65.00
B560P - 619 - 12-288 10-094 KD C123 043156120055 65.00
B560P - 626 - 12-288 10-094 KA 4 C123 043156120109 59.00
B560P - 626 - 12-288 10-094 KD C123 043156120048 59.00
B562 - DoubleCylinder Deadbolt
B562P - 605 - 12-288 10-094 KA 4 C 043156119028 $85.00
B562P - 605 - 12-288 10-094 KD C 043156116638 85.00
B562P - 619 - 12-288 10-094 KA 4 C 043156119103 85.00
B562P - 619 - 12-288 10-094 KD C 043156116676 85.00
B562P - 626 - 12-288 10-094 KA 4 C 043156119127 79.00
B562P - 626 - 12-288 10-094 KD C 043156115860 79.00
B562P - 605 - 12-288 10-094 KA 4 C123 043156120123 85.00
B562P - 605 - 12-288 10-094 KD C123 043156120154 85.00
B562P - 619 - 12-288 10-094 KA 4 C123 043156120147 85.00
B562P - 619 - 12-288 10-094 KD C123 043156120178 85.00
B562P - 626 - 12-288 10-094 KA 4 C123 043156120130 79.00
B562P - 626 - 12-288 10-094 KD C123 043156120161 79.00
Suffixes: D = Deadlatch, B = Less SFIC, J = Less full size IC cylinder, P = 6-pin cylinder
Note: 1) “C123” in Detail column denotes Everest® cylinder.
Notes: 1) “C123” in Detail column denotes Everest® cylinder. For additional cylinder options, see Cyl i nders.
2) To order ANSI strike boxes separately at no-charge to complement locks with 10-025 strikes,
indicate on the order form.
Note: 1) “C123” in Detail column denotes Everest® cylinder. For additional cylinder options, see Cyl i nders.
Suffixes: D = Deadlatch, B = Less SFIC, J = Less full size IC cylinder, L = Less 6-pin cylinder, P = 6-pin cylinder, C = Less 6-pin cylinder
Note: 1) “C123” in Detail column denotes Everest® cylinder. For additional cylinder options, see Cyl i nders.
17
Note: 1) “C123” in Detail column denotes Everest® cylinder. For additional cylinder options, see Cyl i nders.
Saturn (SAT)
Pin Kits
Product Finish Detail SKU No. Price Each
40-119 — Pin kit, seal tight metal box 043156933471 $300.00
40-133 — Home Secure pin kit 043156934614 331.00
40-134 — Pin kit, snap-tight plastic box 043156940479 80.20
40-070 — Primus pin kit S00020024970 353.00
Keying Tools
Product Finish Detail SKU No. Price Each
40-104 — Key gage 043156933464 $12.60
40-128 — Key gage, SFIC S00021655340 12.40
M540-051 — Follower bar 043156941360 4.50
M540-056 — Retainer cap removal tool 043156941377 45.70
Installation Kit
Product Finish Detail SKU No. Price Each
40-147 — Installation kit S00029019588 $1,754.00
Installation Tools
Product Finish Detail SKU No. Price Each
40-015 — Boring bit 7/8˝ 043156933327 $143.00
40-175 — Boring bit 1˝ S00029018291 73.80
40-177 — Boring bit 1 1/2˝ S00029018321 162.00
40-176 — Boring bit 2 1/8˝ S00029018307 186.00
40-031 — Latch marking chisel 1˝ x 2 1/4˝ 043156933433 53.20
40-032 — Latch marking chisel 1 1/8˝ x 2 1/4˝ 043156933440 53.20
Display Mounts
44-105 — A, F-Series 043156943777 $84.60
44-107 — A, F, B-Series 043156943791 108.00
44-110 — L9000-Series 043156943821 107.00
44-112 — ND-Series Levers 043156943845 141.00
44-115 — Clear plastic mount ring 043156943876 33.40
Standard Features*
Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.
Latch 1" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1/2" throw
Strike 1 1/8" x 2 3/4", Square corner, T-strike, box
Backset 2 3/8"
Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**
Door Range 1 3/8" – 1 7/8"
Keys Two nickel silver cut keys per lock, 6-pin, C123 section**
A-Series
Knob or Lever Styles
ORB PLY TUL GEO LEV
Only Plymouth is Available as inside trim only
available in 629 or 630 on deadlatching functions
Finishes
626 605 612 613 626 605 613 626 605 613
625 643e 643e 612
!"#$%&'($
630
Additional Leadtime
606 609 !"#$%&'( )*+$%&'( 606 609
Function Description 625 629 626 625
Keyless
A10S Passage
A25D** Exit $93 $105 $117 $125 $137 $149 $152 $164 $176
** Specify door thickness
A40S Privacy 99 111 123 133 145 157 178 190 202
A30D Patio
133 145 157 172 184 196 207 219 231
A43D Communicating
A170 Single dummy 50 56 62 58 64 70 70 76 82
Keyed, Single Cylinder
A53PD Entrance
A70PD Classroom $177 $189 $201 $220 $232 $244 $247 $259 $271
A80PD Storeroom
A79PD Communicating 201 213 225 244 256 268 - - -
A85PD*** Faculty Restroom 208 220 232 255 267 279 308 320 332
*** Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified.
Emergency keys must be ordered separately
Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price.
2) Keying options: see Keys & Keyi ng.
3) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
Price Book 71 A-3
Effective April 5, 2010
A • Options Latches, Strikes
Latches
Specify Add to
Hsg Lock
Backset Description Dia Springlatch Deadlatch Price
Square corner, 1" x 2 1/4", standard 11-068 11-085
7/8"
2 3/8" 1/4" Radius round corner, 1" x 2 1/4" 11-069 11-088
Circular, drive-in, 605 and 626 finish only 1" 11-110 11-104
Square corner, 1" x 2 1/4" 11-111 11-091 N/C
7/8"
2 3/4" 1/4" Radius round corner, 1" x 2 1/4" 11-112 11-092
Square corner, 1 1/8" x 2 1/4", standard for 2 3/4" backset 11-116 11-096
Circular, drive-in, 605 and 626 finish only 1" 11-113 11-105
3 3/4" Square corner, 1 1/8" x 2 1/4" 11-118 11-103 $8.90
5" Backset extension link 7/8" 41-005* 14.50
— Rabbeted latch and strike kit, 605 and 626 finish only — 39-030** 36.90
* Backset extension link 41-005 must be used with 2 3/8" backset latches.
Link 41-005 requires reinforcement when used in metal doors. See E% L"3# ;V% X"-A;$# % K. 7A;% "79% ' $. 7C>3-$2 $7# ;Y
Link 41-005 installed in 1" latch holes require one G506-815 sleeve. See E% L"3# ;V% E --$;;>3. $;% "79% E 9"@# $3;Y
** This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Strikes
Add to Lock
Description Lip Length Specify Price
Square corner, T-strike, box, 1 1/8" x 2 3/4", standard 1 1/8" 10-001 N/C
Square corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 1 1/2", 10-001 $5.40
1 3/4", 2"
1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" 10-004 N/C
1 3/16" N/C
ANSI, no box, 1 1/4" x 4 7/8" 10-025
1 3/8", 1 1/2” 10.30
Box for ANSI strike, must be specified — K510-066
Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-026 N/C
1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-027
Circular, adjustable, 1 3/4" diameter, 605 and 626 finish only 1 7/32" 10-058
Notes: 1) Electric strike (10-042) is available as a part. S ee A Parts: S tri kes.
2) Strikes with long lip lengths are sold as parts. S ee A Parts: S peci al Parts.
Primus® / Primus XP
Primus cylinders are offered for sale through specific channels of distribution based on security levels.
See !"#$%&'&()*+,-,)*% for more information.
Description Specify
A-Series lock and Primus cylinder Lock less cylinder (use L suffix). Order Primus cylinder
separately. See Cylinders.
Example: 1 ea. A53LD
1 ea. 20-724
A-Series lock and Primus full size interchangeable core Lock less full size core (use J suffix). Order Primus core
cylinder separately. See Cylinders: Interchangeable Core.
Example: 1 ea. A70JD
1 ea. 20-740
Note: 2) Primus is not available for Faculty Restroom function (A85).
Special Options
Extended Factory Lead Time Not subject to standard discount terms
Specify
Description Lock Function "X" Number Add to Lock Price
A53PD with restoring slide A53PD XA11-297 $34.90
Note: 3) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
* Use TUL design sleeve for GEO and PLY (except PLY 630).
Note: 1) Locks manufactured prior to March 1992 require installation of “universal driver” to accommodate Primus® cores.
Roses
Designs and Finishes
PLY TUL
GEO (use for LEV) (use for ORB)
605
605 606
612 612
605 613 613
Part 609 625* 625
Number Description 625* 626 630 626
01-001 Outside Rose $17.20 $17.20 $28.70 $17.20
01-002 Inside Rose
* Available for 01-002 only.
Latches
Part Number Specify Hsg Price
Springlatch Deadlatch Finish Backset Description Dia Each
11-068 11-085 • Square corner, 1" x 2 1/4", standard 7/8"
11-069 11-088 • 2 3/8" 1/4" Radius round corner, 1" x 2 1/4"
11-110 11-104 • 1" Circular drive-in, 605 and 626 only 1"
11-111 11-091 • Square corner, 1" x 2 1/4" $38.20
7/8"
11-112 11-092 • 2 3/4" 1/4" Radius round corner, 1" x 2 1/4"
11-116 11-096 • Square corner, 1 1/8" x 2 1/4" 1"
11-113 11-105 • 1" Circular drive-in, 605 and 626 only
11-118 11-103 • 3 3/4" Square corner, 1 1/8" x 2 1/4" 1" 41.10
39-030* • — Rabbeted latch and strike kit, 605 and 626 only — 34.80
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Strikes
Specify Price
Part Number Finish Description Lip Length Each
10-001* • Square corner, T-strike, box, 1 1/8" x 2 3/4", standard 1 1/8" $6.90
10-001* • Square corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 9.80
1 1/2", 1 3/4", 2"
10-004 • 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" 7.50
1 3/16" 11.50
10-025* • ANSI, no box, 1 1/4" x 4 7/8"
1 3/8", 1 1/2” 28.80
K510-066 Box for ANSI strike — 4.70
10-026 • Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.70
10-027 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.70
10-042 • Electric strike, 1 1/4" x 4 7/8", 606 and 626 only — 186.00
10-058 • Circular, adjustable, 1 3/4" diameter, 605 and 626 only 1 7/32" 9.70
* Specify lip length when ordering.
Miscellaneous Parts
Part Specify Price
Number Finish Description Each
A201-330 • Non-threaded chassis, less knob & rose - A170 $28.50
A201-370 Cam & driver - A80 6.30
A201-377 Mounting plate, ins. (except A43, A79) 6.40
A201-399 • Hub & cap, out. (except A10, A25, A40, A43) 20.50
A201-406 • Hub & cap, out. - A10, A40, A43 20.50
A201-558 • Rose, out. - A25 34.80
A201-684 • Threaded chassis, less knob & rose - A170 28.50
A201-688 • Turn unit, ins. - A43 34.80
A301-386* Spindle & catch, ins. (except A43, A79) 6.40
A301-387 Spindle & catch, out. (except A25, A43) 6.40
A301-391* Cam unit - A30 6.40
A301-402 Cam unit, out. - A40, A53, A85 6.40
A301-403 • Housing & cap, 1 3/8" thru 1 7/8" door (except A43, A79) 7.60
A301-404 • Housing & cap, 1 7/8" thru 2 1/4" door, EI (except A43, A79) 7.60
A301-405 • Housing & cap, 2 1/4" thru 2 1/2" door, EI (except A43, A79) 7.60
A301-406 • Threaded housing & cap, ins. (except A43, A79) 7.70
A301-409* Spindle, 1 7/8" thru 2 1/4" door, EI (except A43, A79) 26.30
A301-410* Spindle, 2 1/4" thru 2 1/2" door, EI (except A43, A79) 26.30
A500-001 Spindle, ins, 2" thru 2 1/4" door, EI - A43 10.80
A500-002 Spindle, ins., 2 1/2" door, EI - A43 10.80
A501-167 Threaded rod for mounting A170s as double dummy set 10.70
A501-305 Hub plate, ins. (except A79) 5.00
A501-498 Hub, 1 3/8" door - A25 7.50
A501-499 Hub, 1 3/4" door - A25 7.60
A501-615 Spindle wedge - A80, A85 4.70
A501-633 Spindle, ins. - A43 5.50
A501-710 Swivel sleeve - A85 (except ORB design) 4.80
A501-721 Cam plug - A70, A79 14.50
A501-766 • Rose, ins. - A79 31.30
A501-767 Mounting plate - A79 4.80
A501-768 Hub plate, ins. - A79 4.80
A501-791 Cam & plug spacer - A70, A79 3.00
A501-874 Hub plate, out. - A25 7.50
A501-901 Plate, out. - A80, A85 3.40
A508-399 Plate, out. (except A25, A80, A85) 6.50
A508-597** Spring separator (except A10, A25, A40, A43) 4.80
A700-017 Spiral cam - A70, A79 7.10
* Parts that are not directly interchangeable with MA45 parts.
** Parts that require frame A508-598.
Note: 1) Parts listed are for A-Series locks manufactured since 1984, identified as MA84.
All parts except those noted are interchangeable for lock parts manufactured before 1984,
identified as MA45.
Note: 1) Parts listed are for A-Series locks manufactured since 1984, identified as MA84.
All parts except those noted are interchangeable for lock parts manufactured
before 1984, identified as MA45.
Plunger Units
Part Specify Price
Number Finish Description Each
01-055 • Plunger unit, ins. - A30
01-056 • Plunger unit, ins. - A40
01-057 • Plunger unit, out. - A40 $10.60
01-058 • Plunger unit, out. - A43
01-060 • Plunger unit, ins. - A53
01-063 • Plunger unit, ins. - A85 22.50
Note: 2) Specify dimension for all plunger units. See chart below for dimensions.
Screws
Price Each
(Order in
Part Specify multiples
Number Finish Description Door Thickness Type Size of 100)
A501-161 Mounting, All from 1 3/8" – 1 7/8" POH Mach 10-32 x 1 1/8" $0.64
(except A43, A79)
A501-769 Mounting, A79 from 1 3/8" – 2" POMH 1-way 10-32 x 1 1/8" 0.76
A501-770 Mounting, A79 over 2" – 2 3/4", EI POMH 1-way 10-32 x 2" 0.78
A501-818 Mounting, All from 2" – 2 1/2", EI POH Mach 10-32 x 2 1/16" 0.70
(except A43, A79)
A508-649 • Mounting, A43 from 1 3/8" – 1 7/8" Torx screw (T-20) 10-32 x 1 1/8" 1.40
A508-650 • Mounting, A43 from 2" – 2 1/2", EI Torx screw (T-20) 10-32 x 2" 1.40
C603-256 • ANSI strike — PFH Combo 12-24 x 1" 0.64
C603-897 • Latch or standard strike — PFH Combo 8-32 x 3/4" 0.70
Mounting, A170
Special Parts
Extended Factory Lead Time Not subject to standard discount terms
Part Specify
Number Finish Description Price Each
XQ07-351* • 10-025 Strike, 7/8" flat lip $18.90
10-025 Strike, lips thru 6" (except 7/8", 1 3/16", 1 3/8" and 1-1/2") 91.60
* Specify lip length.
Note: 2) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
Standard Features*
Certification ANSI/BHMA Certified A156.5-2001, Grade 2 auxiliary lock.
Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 9/16" throw deadlatch
Strike 1 1/8" x 2 3/4", Square corner, T-strike, box
Backset 2 3/8"
Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**
Door Range 1 3/8" – 1 3/4"
Keys Two nickel silver cut keys per lock, 6-pin, C123 section**
Trim Rings 7/16" and 1/8" Wrought brass or bronze, reinforced with security inserts
Outside Cylinder Available in: Inside Cylinder Available in: Rose and Turn Available in:
Trim 605 606 Trim 605 606 605 606
609 612 609 612 609 612
613 625 613 625 613 625
626 626 626
B250-Series
Finishes
626 605 613
Additional
Leadtime
606 609
Function Description 612 625
Keyed, Single Cylinder Functions
B250PD* Single cylinder outside, holdback turn inside $189 $195 $201
* Available without holdback feature. See Special Options for details
Keyed, Double Cylinder Functions
CAUTION: !"#$%&'()%*+,&-'%"(./'"+'-&/*,&+(&/'0+,'0+)',""-'*+'0+)'/1-#(1#-&'23*(3'*/'#/&,'4"-'&5-&//'0-&0'0'%*4&'/04&1)'30/60-,'*+
1*7&/'"4'&7&-5&+()'0+,'13&*-'#/&'*/'+"1'-&("77&+,&,8'9+/10%%01*"+'/3"#%,'$&'*+'0(("-,0+(&'2*13'&:*/1*+5'(",&/'"+%)8
B252PD Double cylinder $208 $214 $220
12-100 39-030
Standard
Deadlatches
Hsg Add to
Backset Description Dia Specify Lock Price
2 3/8" Square corner, 1 1/8" x 2 1/4", standard 12-100
1" N/C
2 3/4" Square corner, 1 1/8" x 2 1/4" 12-103
— Rabbeted latch and strike kit, 605 and 626 only — 39-030* $36.90
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Strikes
Lip Add to
Description Length Specify Lock Price
Square corner, T-strike, box, 1 1/8" x 2 3/4", standard 1 1/8" 10-001 N/C
Square corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 10-001 $5.20
1 1/2", 1 3/4",
2"
1/4" Radius round corner, T-strike, box, 1 18" x 2 3/4" 1 1/8" 10-004 N/C
1 3/16" 5.40
ANSI, no box, 1 1/4 x 4 7/8" 10-025
1 3/8", 1 1/2" 10.30
Box for ANSI strike, must be specified — K510-066 N/C
Note: 1) Electric strike (10-042) is available as a part. See B250 Parts: S trikes.
Available in:
605 606
609 612
613 625
626
Note: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.
B202-671 B202-672
Trim
Part Specify Price
Number Finish Description Each
B202-671 • Rose and turn without holdback $32.00
B202-672 • Rose and turn with holdback 48.60
B502-711 Support (anchor) for turn mounting screws - B270 3.40
B502-815 • Blank inside rose, exposed screws - B251, 18.30
available 605 and 626 finshes only
Note: 3) For trim rings and inserts, see Cylinders: B250.
Special Options
Extended Factory Lead Time Not subject to standard discount terms
Specify Add to
Description Lock Function “X” Number Lock Price
B250PD for doors over 2 3/4" – 5 9/16" B250PD XB03-330* $81.70
B252PD for doors over 2 3/4" – 5 9/16" B252PD XB03-427* 97.90
B250PD less holdback (substitutes B400 turn) B250PD XB09-062 24.50
* Specify door thickness.
Note: 1) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
12-100 39-030
Deadlatches
Part Specify Hsg Price
Number Finish Backset Description Dia Each
12-100 • 2 3/8" Square corner, 1 1/8" x 2 1/4", standard $56.00
1"
12-103 • 2 3/4" Square corner, 1 1/8" x 2 1/4"
39-030* • — Rabbeted latch and strike kit, 605 and 626 only — 36.90
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Strikes
Part Specify Price
Number Finish Description Lip Length Each
10-001* • Square corner, box, T-strike, 1 1/8" x 2 3/4", standard 1 1/8" $6.90
10-001* • Square corner, box, T-strike, 1 1/8" x 2 3/4" 1", 1 1/4", 9.80
1 1/2", 1 3/4",
2"
10-004 • 1/4" Radius round corner, box, T-strike, 1 1/8" x 2 3/4" 1 1/8" 7.50
1 3/16" 10.80
10-025* • ANSI, no box, 1 1/4" x 4 7/8"
1 3/8", 1 1/2" 28.80
10-042 • Electric latch release, 606 and 626 only — 186.00
C603-623 Box for T-strike — 0.42
K510-066 Box for ANSI strike — 4.70
* Specify lip length.
38-031 38-032
Adapters
Price Each
(per finish)
Part Specify 605
Number Finish Description Contents 626 613
38-016 • Adapter ring kit for double cylinder locks used in 2 1/8" hole (2) 38-031 $18.50 $20.40
38-017 • Adapter ring kit for single cylinder locks used in 2 1/8" hole (1) 38-031 and 24.70 26.50
(1) 38-032
38-031 • 2 1/2" Diameter adapter ring for 2 1/8" door prep for under — 8.70 10.50
cylinder
38-032 • 2 7/8" Diameter adapter ring for 2 1/8" door prep for under — 15.90 16.20
turn units/blank roses.
A501-566
Door Reinforcements
Part Price
Number Description Each
A501-565 Reinforcer for 1 3/8" thick nonreinforced metal doors, fits both 7/8" and 1" diameter housings $12.60
(2 required per lock)
A501-566 Reinforcer for 1 3/4" thick nonreinforced metal doors, fits both 7/8" and 1" diameter housings 12.60
(2 required per lock)
Screws
Description Application Price Each
Part Specify (Order in
Number Finish Size Type Use with: Door Thickness multiples of 100)
Single Cylinder, B250PD
7/16" & 1/8" trim rings 5-Pin 1 5/16" – under 1 11/16"
B520-086 • 10-32 x 2 1/4" 7/16" trim ring 1 11/16" – 1 15/16"
(2) 1/8" trim rings 6-Pin 1 5/16" – under 1 7/16"
POH 7/16" & 1/8" trim rings 1 7/16" – 1 13/16"
machine 7/16" trim ring over 1 15/16" – 2 1/4" $0.66
5-Pin
1/8" trim ring over 2 1/4" – 2 9/16"
B520-087 • 10-32 x 2 5/8" 7/16" & 1/8" trim rings over 1 13/16" – 1 15/16"
7/16" trim ring 6-Pin over 1 15/16" – 2 9/16"
1/8" trim ring over 2 9/16" – 2 3/4"
Double Cylinder, B252PD
7/16" & 1/8" trim rings 1 5/16" – under 1 11/16"
B520-267 10-32 x 2 1/2" 7/16" trim ring 5-Pin 1 11/16" – 1 15/16"
1/8" trim ring 2 7/16" – 2 11/16"
7/16" & 1/8" trim rings over 1 7/16" – under 1 11/16"
7/16" trim ring 5-Pin over 1 15/16" – under 2 7/16"
B520-268 10-32 x 2 3/4" Cross 1/8" trim ring over 2 11/16" – 2 7/8"
recess 7/16" & 1/8" trim rings 1 7/16" – under 1 9/16" $1.40
7/16" trim ring 6-Pin over 1 11/16" – 2 3/16"
1/8" trim ring over 2 11/16" – 2 13/16"
(4) 1/8" trim rings 1 3/16" – under 1 7/16"
B520-269 10-32 x 3" 7/16" & 1/8" trim rings 6-Pin 1 9/16" – 1 15/16"
7/16" trim ring over 2 13/16" – 2 11/16"
1/8" trim ring over 2 13/16" – 3 1/8"
B520-271 • Drive pin — — 0.66
Interchangeable Core, Single Cylinder, B250RD
1" & 1/8" trim rings 1 5/16" – 1 1/2"
B520-086 • 10-32 x 2 1/4"
POH 1" trim ring over 1 1/2" – 2 1/8"
machine 1" trim ring over 2 1/8" – 2 3/8" $0.66
B520-087 • 10-32 x 2 5/8" 7/16" & 1/8" trim rings over 2 3/8" – 2 5/8"
7/16" trim ring over 2 5/8" – 3 1/8"
Interchangeable Core, Double Cylinder, B252RD
1" & 1/8" trim rings 15/16" – 1 5/8"
1" trim ring over 1 5/8" – 2 1/8"
B520-269 10-32 x 3"
Cross 7/16" & 1/8" trim rings over 2 1/8" – 2 3/8" $1.40
recess 1" trim ring over 2 3/8" – 2 5/8"
B520-271 • Drive pin — — 0.66
All Functions
C603-256 • 12-24 x 1" PFH ANSI strike — $0.66
C603-897 • 8 x 3/4" combo Latch and strike — 0.70
Special Parts
Extended Factory Lead Time Not subject to standard discount terms
Part Specify Price
Number Finish Description Each
XQ07-351* • 10-025 Strike, lips thru 6" (except 7/8", 1 3/16",1 3/8" and 1 1/2") $91.60
XQ03-493* • 10-001 Strike, over 2" thru 6" lip 78.20
* Specify lip length.
Note: 3) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
Standard Features*
Certification ANSI A156.5, 2001, Grade 2. Available UL Listed for 3-hour fire door.
Deadbolt 1" x 2 1/4", Square corner faceplate, 1" housing diameter, 1" throw
Strike 1 1/8" x 2 3/4", Square corner, box
Backset Adjustable for 2 3/8" or 2 3/4"
Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**
Door Range 1 3/8" – 1 3/4"
Keys Two cut keys per lock, 6-pin, C123 section**
Reinforcement Metal dust box reinforcer with three - 3˝ screws
Trim Ring 1" Wrought brass or bronze, reinforced with security insert
Outside Cylinder Trim Available in: Inside Cylinder Trim Available in: Rose and Turn Available in:
605 606 605 606 605 606
609 612 609 612 609 612
613 619 613 619 613 619
625 626 625 626 625 626
643e 643e 643e
B500-Series
Finishes
626 605 606 613
609 612
619 625
Function Description 643e (was 716)
Keyless
B580 No trim outside, Turn bolt inside $46 $52 $58
B580F No trim outside, Turn bolt inside, Fire rated 52 58 64
B581 Blank plate outside, Turn bolt inside 46 52 58
B581F Blank plate outside, Turn bolt inside, Fire rated 52 58 64
B571 Occupancy indicator outside, Turn bolt inside, 48 54 60
One 61-509 Emergency Release Key included
Keyed, Single Cylinder
B560P Single cylinder outside, Turn bolt inside $59 $65 $71
B560PF Single cylinder outside, Turn bolt inside, Fire rated 64 70 76
B561P One way cylinder outside, Blank plate inside 59 65 71
B561PF One way cylinder outside, Blank plate inside, Fire rated 64 70 76
B563P Classroom cylinder outside, Retraction turn bolt inside 61 67 73
B563PF Classroom cylinder outside, Retraction turn bolt inside, Fire rated 67 73 79
Keyed, Double Cylinder
CAUTION: !"#$%&'()%*+,&-'%"(./'"+'-&/*,&+(&/'0+,'0+)',""-'*+'0+)'/1-#(1#-&'23*(3'*/'#/&,'4"-'&5-&//'0-&'0'%*4&'/04&1)'3060-,'*+
1*7&/'"4'&7&-5&+()'0+,'13&*-'#/&'*/'+"1'-&("77&+,&,8'9+/10%%01*"+'/3"#%,'$&'*+'0(("-,0+(&'2*13'&:*/1*+5'(",&/'"+%)8
B562P Double cylinder $79 $85 $91
Deadbolts
Hsg Add to
Backset Description Dia Specify Lock Price
Square corner, 1" x 2 1/4", standard 1" 12-288
1/4" Radius round corner, 1" x 2 1/4" 1" 12-289
2 3/8" Circular, drive-in, 626 only 1" 12-290
or N/C
Triple option, 1/4" radius round corner faceplate with 1" x 2 1/4" square 1" 12-287
2 3/4" corner and circular faceplates
Square corner, 1 1/8" 1" 12-291
5" Square corner, 1 1/8" x 2 1/4" 1" 12-633 $17.10
— Rabbeted deadbolt and strike kit, 605 and 626 only — 39-030* 34.80
For UL Listed Locks
2 3/8" Square corner, 1" x 2 1/4", standard 1" 12-294 N/C
or
2 3/4"
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Strikes
Lip Add to
Description Length Specify Lock Price
Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only — 10-064 N/C
ANSI, box, 1 1/4" x 4 7/8" 1 3/16" 10-087 $5.00
1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-092
Square corner, 1 1/8" x 2 3/4", standard — 10-094
Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-095
Round corner, 1 1/8" x 2 3/4" — 10-108
1/4" Round corner, 1 1/4" x 3 5/8", 4 hole, 605, 609, 620, 630 only — 10-104 N/C
no reinforcement strike provided
1/4" Round corner, 1" x 2 1/4", 605, 609, 630 only — 10-103
no reinforcement strike provided
2" mounting screws, 605, 609, 630, 643e only — J250-028
Strike reinforcer, use with 10-094, 10-108 — 37-016
Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.
2) Locks are furnished 1-bitted, with two 6-pin keys, unless otherwise specified. Locks are not available with 0-bitted
interchangeable cores.
3) For Everest® D Family restricted keyways, add $9. 30 per cylinder.
4) For full size construction core, specify T suffix. Example: B560T. Available at no additional charge. Locks are assessed
one non-refundable handling charge (50-231) per core. See Keys & Keying for details.
5) For 1-3/8” to 1-5/8” door thickness, see page B500-7.
605 609
612 619
Function Description 626 625 643e 613
Less Full Size Interchangeable Core, Single Cylinder
B560J Less single core outside, turn inside $80 $86 $92
B560JF Less single core outside, turn inside (UL listed) 85 91 97
B561J Single core outside, blank plate inside 80 86 92
B561JF Single core outside, blank plate inside (UL listed) 85 91 97
B563J Single core outside, classroom turn inside 82 88 94
B563JF Single core outside, classroom turn inside (UL listed) 87 93 99
Less Full Size Interchangeable Core, Double Cylinder
B562J Less double core $87 $93 $99
605 609
612 6619
Function Description 626 625 643e 613
Less Small Format Interchangeable Core, Single Cylinder
B560BD Less single core outside, turn inside $77 $83 $89
B560BDF Less single core outside, turn inside (UL listed) 83 89 95
B561BD Single core outside, blank plate inside 77 83 89
B561BDF Single core outside, blank plate inside (UL listed) 83 89 95
B563BD Single core outside, classroom turn inside 79 85 91
B563BDF Single core outside, classroom turn inside (UL listed) 85 91 97
Less Small Format Interchangeable Core, Double Cylinder
B562BD Less double core $84 $90 $96
Notes: 4) For small format disposable core, specify suffix BDC. Example: B560BDC. Available at no additional charge.
Primus® XP
Primus cylinders are offered for sale through specific channels of distribution based on security levels.
See @&*<'(R(!)$2.-.)$' for more information.
Description Specify
B500-Series lock and Primus cylinder Lock less cylinder (use L suffix). Order Primus cylinder
separately. See B500: Complete Cylinders.
Example: 1 ea. B560L
1 ea. 20-729
B500-Series lock and Primus full size Lock less full size core (use J suffix). Order Primus core
interchangeable core cylinder separately. See Cylinders: Interchangeable Core.
Example: 1 ea. B562J
2 ea. 20-740
Antimicrobial Coating
Finish: 626AM
Description of Components Coated Add to Deadbolt Price
Inside Thumbturn, Rose
Outside Trim Ring, Cylinder Faceplate $10.50
Note: 2) For doors over 2 1/4" to 4" thick, see Special Parts for conversion kits
Trim
Part Specify Price
Number Finish Description Each
B302-041 • Rose and turn $30.00
B600-018 Mounting plate for rose and turn 6.60
12-626 • Blank rose, exposed screws 16.40
38-034 • Blank mounting plate kit for use on one side of B580 61.50
B302-045 • Classroom rose and turn 30.00
Deadbolts
Part Specify Hsg Price
Number Finish Backset Description Dia Each
12-288 • Square corner, 1" x 2 1/4" 1" $27.80
12-289 • 2 3/8" 1/4" Radius round corner, 1" x 2 1/4"
12-290 or 1" Circular drive-in, 626 only 1" 27.80
12-287 • 2 3/4" Triple option, 1/4" radius round corner faceplate with 1" x 2 1/4"
1" 34.80
square corner and circular faceplates
12-291 • Square corner, 1 1/8" x 2 1/4" 1" 27.80
12-633 • 5" Fixed backset, square corner, 1 1/8" x 2 1/4" 1" 58.90
39-030* • — Rabbeted deadbolt and strike kit, 605 and 626 only — 36.90
*This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Strikes
Part Specify Price
Number Finish Description Lip Length Each
10-064 Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only — $10.60
10-087 • ANSI, box, 1 1/4" x 4 7/8" 1 3/16" 14.40
10-092 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.70
10-094 • Square corner, box, 1 1/8" x 2 3/4", standard — 10.90
10-095 • Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.70
B520-283 Plastic dust box, used with 10-094 and 10-108 — 0.46
10-103 • 1/4" Round corner, 1" x 2 1/4", 605, 609, 630 only — 2.00
10-104 • 1/4" Round corner, 1 1/4" x 3 5/8", 4 hole (605, 609, 630 only) — 2.40
10-108 • Round corner, 1 1/8" x 2 3/4", w/metal dust box — 11.60
10-112 Metal dust box and 3 screws, use with 10-094, 10-108 — 11.60
37-016 Strike reinforcer, use with 10-094, 10-108 — 10.10
Adapters
Part Specify
Number Finish Description Price Each
605 609
612 613 619
626 625 643e
38-031 • 2 1/2" Diameter adapter ring for 2 1/8" door preparation,
for under cylinder $8.70 $10.50 N/A
B520-649 • Trim ring w/shield for B560 / B562 11.60 13.30 $13.30
B520-650 • Trim ring w/shield for ICfunctions 11.60 13.30 13.30
A501-566 B520-622
Jamb
Metal
Dust Box
reinforcer 3˝ Screw
Strike
Stud
Door/Frame Reinforcements
Part Price
Number Description Each
A501-565 Reinforcer for 1 3/8" thick nonreinforced metal doors; fits both 7/8" and 1" diameter housings
(2 required per lock) $12.60
A501-566 Reinforcer for 1 3/4" thick nonreinforced metal doors; fits both 7/8" and 1" diameter housings
(2 required per lock)
37-016 Door frame strike reinforcer 10.10
B520-622 Metal dust box reinforcer 10.10
Screws
Description Application Price Each
(Order in
Part Specify multiples
Number Finish Size Type Use Door Thickness of 100)
Keyless, B580
B600-066 • 6-32 x 1/4" PH mach. Turn — $0.66
B600-048 8-32 x 1/2" PH mach. Mounting plate — 0.66
F506-359 8 x 3/4" RH wood Mounting plate — 0.66
Keyed, Single Cylinder, B560P, B563P
B600-100 1/4"-28 x 1 15/16" POH mach. Mounting 1 3/8" - 1 3/4" $1.40
B600-101 1/4"-28 x 2 1/2" POH mach. Mounting over 1 3/4" - 2 1/4" 1.40
B600-066 • 6-32 x 1/4" PH mach. Turn — 1.40
B520-298 10-32 x 3/8" PH mach. Anti-pry shield — 1.40
Keyed, Single Cylinder, B560GD, B563GD, B560R, B563R
B600-100 1/4"-28 x 1 15/16" POH mach. Mounting 1 3/8" - 2 1/4" $1.40
B600-066 • 6-32 x 1/4" PH mach. Turn — 1.40
Keyed, Double Cylinder, B562P
B600-047 1/4"-28 x 3 13/64" PH mach. Mounting 1 3/8" - 1 3/4" $1.40
B600-078 1/4"-28 x 3 29/64" PH mach. Mounting over 1 3/4" - 2 1/4" 1.40
B520-298 10-32 x 3/8" PH mach. Anti-pry shield — 1.40
Keyed, Double Cylinder, B562GD, B562R
B600-053 1/4"-28 x 2 61/64" PH mach. Mounting 1 3/8" - 2 1/4" $1.40
B520-298 10-32 x 3/8" PH mach. Anti-pry shield — 1.40
Keyless, B571, B581
B520-662 10-32 x 1 1/8" POH mach. Mounting 1 3/8" - 1 3/4" $1.40
B520-663 10-32 x 1 3/4" POH mach. Mounting over 1 3/4" - 2 1/4" 1.40
B600-066 • 6-32 x 1/4" PH mach. Turn — 1.40
All Functions
C603-897 8 x 3/4" PFH combo Deadbolt and strike screw — $0.70
J250-028 8 x 2" PFH wood 2˝ strike screw — 0.66
R525-256 12 x 3" PFH wood 3˝ Metal dust box screw — 0.66
Screw Packs
Part Specify Price
Number Finish Door Thickness Contents Each
Keyless, B580
61-506 • 1 3/8" – 2 1/4" (2) B600-048
(2) F605-359
(4) C603-897 $10.90
(1) B600-018
(2) B600-066
Keyed, Single Cylinder, B560P, B563P
61-500 • 1 3/8" – 1 3/4" (1) B600-018
(2) B600-100 $9.00
(2) B600-066
(4) C603-897
61-501 • over 1 3/4" – 2 1/4" (1) B600-018
(2) B600-101 9.00
(2) B600-066
(4) C603-897
Keyed, Single Cylinder, B560GD, B563GD, B560R, B563R
61-500 • 1 3/8" – 2" (1) B600-018
(2) B600-100 $9.00
(2) B600-066
(4) C603-897
Keyed, Double Cylinder, B562P
61-502 1 3/8" – 1 3/4" (2) B600-047 $6.30
(4) C603-897
61-503 over 1 3/4" – 2 1/4" (2) B600-078 6.30
(4) C603-897
Keyed, Double Cylinder, B562GD, B562R
61-507 1 3/8" – 2" (2) B600-053 $6.30
(4) C603-897
Keyless, B581, B571
61-504 • 1 3/8" – 1 3/4" (2) B520-662
(4) C603-897 $14.20
(2) B600-066
(1) B600-018
61-505 • over 1 3/4" – 2 1/4" (2) B520-663
(4) C603-897 14.20
(2) B600-066
(1) B600-018
Note: 1) For tailpieces and cylinders see Cylinders: B500.
Special Parts
Extended Factory Lead Time Not subject to standard discount terms
Part Specify Price Cylinder
Number Finish Function Description Each Type
XB12-208 B560P Screw and tailpiece conversion $89.40
kit for B500 series locks to fit Standard
XB12-209 B562P doors. Extended Equally (EE), 105.00 Cylinder
over 2-1/4˝ - 4˝ thick. Specify Only
door thickness.
Standard Features
Locks are furnished with standard features unless otherwise specified.
* Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.
B660P
B760P
B860P E2151 Single Cylinder Deadbolt Lock
Deadbolt thrown or retracted by key
from outside or by inside turn unit.
Bolt automatically deadlocks when
fully thrown.
B662P
B762P
B862P E2141 Double Cylinder Deadbolt Lock*
Deadbolt thrown or retracted by key
from either side. Bolt automatically
deadlocks when fully thrown.
B661P
B761P
B861P E2161 One-Way Deadbolt Lock
Deadbolt thrown or retracted by key
only. Blank plate inside. Bolt
automatically deadlocks when fully
thrown.
B663P
B763P
B863P E2171 Classroom Deadbolt Lock
Deadbolt thrown or retracted by key
outside. Inside turn unit will retract
bolt only. Bolt automatically
deadlocks when fully thrown.
B664P
B764P
B864P E2101 Cylinder Lock
Deadbolt thrown or retracted by key
from one side. No inside trim. Bolt
automatically deadlocks when fully
thrown. Requires 1 1/2" cross bore only.
Outside Cylinder Trim Available in: Inside Cylinder Trim Available in: Rose and Turn Available in:
605 606 605 606 605 606
609 612 609 612 609 612
613 619 613 619 613 619
625 626 625 626 625 626
643e 643e 643e
B600-Series
Finishes
626 605 606 613
609 612
619 625
Function Description 643e
Keyless
B680 No trim outside, Turn bolt inside $114 $120 $126
Keyed, Single Cylinder
B660P Single cylinder outside, Turn bolt inside $145 $151 $157
B661P One way cylinder outside, Blank plate inside
B663P Classroom cylinder outside, Retraction turn bolt inside 151 157 163
B664P Classroom cylinder outside, No trim inside 145 151 157
Keyed, Double Cylinder
CAUTION: !"#$%&'()%*+,&-'%"(./'"+'-&/*,&+(&/'0+,'0+)',""-'*+'0+)'/1-#(1#-&'23*(3'*/'#/&,'4"-'&5-&//'0-&'0'%*4&'/04&1)'3060-,'*+
1*7&/'"4'&7&-5&+()'0+,'13&*-'#/&'*/'+"1'-&("77&+,&,8'9+/10%%01*"+'/3"#%,'$&'*+'0(("-,0+(&'2*13'&:*/1*+5'(",&/'"+%)8
B662P Double cylinder $186 $192 $198
B700-Series
Finishes
626 605 606 613
609 612
619 625
Function Description 643e
Keyed, Single Cylinder
B760P Single cylinder outside, Turn bolt inside $195 $201 $207
B761P One way cylinder outside, Blank plate inside
B763P Classroom cylinder outside, Retraction turn bolt inside 203 209 215
B764P Classroom cylinder outside, No trim inside 195 201 207
Keyed, Double Cylinder
CAUTION: !"#$%&'()%*+,&-'%"(./'"+'-&/*,&+(&/'0+,'0+)',""-'*+'0+)'/1-#(1#-&'23*(3'*/'#/&,'4"-'&5-&//'0-&0'%*4&'/04&1)'3060-,'*+
1*7&/'"4'&7&-5&+()'0+,'13&*-'#/&'*/'+"1'-&("77&+,&,8'9+/10%%01*"+'/3"#%,'$&'*+'0(("-,0+(&'2*13'&:*/1*+5'(",&/'"+%)8
B762P Double cylinder $285 $291 $297
B800-Series
Finishes
626 605 606 613
609 612
619 625
Function Description 643e
Keyed, Single Cylinder
B860P Single cylinder outside, Turn bolt inside $212 $218 $224
B861P One way cylinder outside, Blank plate inside
B863P Classroom cylinder outside, Retraction turn bolt inside 225 231 237
B864P Classroom cylinder outside, No trim inside 212 218 224
Keyed, Double Cylinder
CAUTION: !"#$%&'()%*+,&-'%"(./'"+'-&/*,&+(&/'0+,'0+)',""-'*+'0+)'/1-#(1#-&'23*(3'*/'#/&,'4"-'&5-&//'0-&'0'%*4&'/04&1)'3060-,'*+
1*7&/'"4'&7&-5&+()'0+,'13&*-'#/&'*/'+"1'-&("77&+,&,8'9+/10%%01*"+'/3"#%,'$&'*+'0(("-,0+(&'2*13'&:*/1*+5'(",&/'"+%)8
B862P Double cylinder $301 $307 $313
Deadbolts
Housing Add to
Backset Description Diameter Specify Lock Price
Square corner, 1 1/8" x 2 1/4" 1" 12-630
2 3/8"
Circular, drive-in, 626 only 1 1/16" 12-640 N/C
Square corner, 1 1/8" x 2 1/4", standard 1" 12-631
2 3/4"
Circular, drive-in, 626 only 1 1/16" 12-641
Square corner, 1 1/8" x 2 1/4" 1" 12-632
3 3/4"
Circular, drive-in, 626 only 1 1/16" 12-642 $17.10
Square corner, 1 1/8" x 2 1/4" 1" 12-633
5"
Circular, drive-in, 626 only 1 1/16" 12-643
— Rabbeted deadbolt and strike kit, 605 and 626 only — 39-030* 36.90
2-3/8 or 2-3/4" Square corner, 1-1/8" x 2-1/4", adjustable backset 1" 12-297
Circular, drive-in, 626 only, adjustable backset 1" 12-317 N/C
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Strikes
Lip Add to
Description Length Specify Lock Price
Square corner, metal dust box, 1 1/8" x 2 3/4", standard 10-094
-
Circular drive-in, thimble-strike, 1 3/16" diameter, 494 (for 626) only 10-064
ANSI, box, 1 1/4" x 4 7/8" 1 3/16" 1 3/16" 10-087
1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-092
1 1/8"
Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-095 N/C
1/4" Round corner, 1 1/4" x 3 5/8", 4 hole, metal dust box, 605, 609, 620, 630 10-104
1/4" Round corner, 1" x 2 1/4", 605, 609, 630 only 10-103
-
Strike reinforcer, use with 10-094 37-016
2" mounting screws, 605, 609, 630 only J250-028
Antimicrobial Coating
Finish: 626AM
Description of Components Coated Add to Deadbolt Price
Inside Thumbturn, Rose or same as outside for double cylinder
Outside Trim Ring, Cylinder Faceplate $10.50
12-617 B600-017
Trim
Part Specify Price
Number Finish Description Each
12-617 • Rose and turn $30.10
12-618 • Rose and turn, classroom 33.60
12-625 Classroom driver kit 6.70
12-626 • Blank inside rose, exposed screws, B661 16.20
38-034 • Blank mounting plate kit for use on one side of B664, B680 61.50
B600-017 Security shield, 2 1/8" door preparation 6.70
B600-018 Mounting plate, turn 6.70
B610-035 Support (anchor) and mounting screws, B664 17.50
Note: 1) For trim rings and cylinders see Cylinders: B600/700/800.
Deadbolts
Part Specify Hsg Price
Number Finish Backset Description Dia Each
12-297 • 2-3/8 or Square corner, 1-1/8" x 2-1/4", adjustable backset
1" $38.10
12-317 2-3/4" Circular, drive-in, 626 only, adjustable backset
12-630 • 2 3/8" Square corner, 1 1/8" x 2 1/4" 1"
12-640 Circular, drive-in, 626 only 1 1/16" 33.70
12-631 • 2 3/4" Square corner, 1 1/8" x 2 1/4", standard 1"
12-641 Circular, drive-in, 626 only 1 1/16"
12-632 • 3 3/4" Square corner, 1 1/8" x 2 1/4" 1"
12-642 Circular, drive-in, 626 only 1 1/16" 58.90
12-633 • Square corner, 1 1/8" x 2 1/4" 1"
5"
12-643 Circular, drive-in, 626 only 1 1/16"
39-030* • — Rabbeted deadbolt and strike kit, 605 and 626 only — 36.90
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Strikes
Part Specify Lip Price
Number Finish Description Length Each
10-094 • Square corner, metal dust box, 1 1/8" x 2 3/4", standard $10.90
10-064 • Circular drive-in, thimble-strike, 1 3/16" diameter, — 10.60
494 (for 626) only
10-087 • ANSI, box, 1 1/4" x 4 7/8" 1 3/16" 14.40
10-092 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.50
10-095 • Square corner, full lip, no box, 1 5/8" x 2 1/4"
B520-283 Box for standard strike 0.48
K510-066 Box for ANSI strike 4.70
10-103 • 1/4" Round corner, 1" x 2 1/4", metal dust box, 605, 609, 630 only — 2.00
10-104 • 1/4" Round corner, 1 1/4" x 3 5/8", 4 hole, 605, 609, 620, 630 only 2.40
10-112 Metal dust box and 3 screws, use with 10-094 11.60
37-016 Strike reinforcer, use with 10-094 10.20
A501-566
Jamb
Metal
Dust
Box 3˝ Screw
Strike
Stud
Door/Frame Reinforcements
Part Price
Number Description Each
A501-565 Reinforcer for 1 3/8" thick nonreinforced metal doors; fits both 7/8" and 1" diameter housings $12.60
(2 required per lock)
A501-566 Reinforcer for 1 3/4" thick nonreinforced metal doors; fits both 7/8" and 1" diameter housings 12.60
(2 required per lock)
37-016 Door frame strike reinforcer 10.20
B520-622 Metal dust box reinforcer 10.20
Screws
Description Price Each
Part Specify (Order in multiples
Number Finish Size Type Application of 100)
C603-256 • 12-24 x 1" PFH ANSI strike $0.66
C603-897 • 8 x 3/4" combo Deadbolt and strike 0.70
Special Parts
Extended Factory Lead Time Not subject to standard discount terms
Part Specify Price
Number Finish Function Description Each
XB11-916 B660P, B663P $93.90
XB11-917 B662P 110.00
XB11-918 B760P, B763P B860P, B863P Screw and tailpiece conversion kit for B600/ 93.90
XB11-919 B762P, B862P 700/800-Series locks to fit doors Extended 110.00
XB11-920 B660R, B660J, B660T, B663R, Equally (EE), over 2 1/2" – 4" thick. Specify 93.90
B663J, B663T, B760R, B763R door thickness.
XB11-921 B662R, B662J, B662T, B762R 110.00
XB11-922 B660BD, B660GD, B660HD, Screw and tailpiece conversion kit for 93.90
B663BD, B663GD, B663HD B600-Series locks to fit doors Extended
XB11-923 B662BD, B662GD, B662HD Equally (EE), over 2" – 4" thick. Specify door 110.00
thickness.
Note: 3) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
Standard Features*
Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.
Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw
Strike 1 1/4" x 4 7/8", ANSI, Square corner, no box
Backset 2 3/4"
Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**
Door Range 1 3/8" – 2"
Keys Two nickel silver cut keys per lock, 6-pin, C123 section**
D-Knobs
Knob Styles
PLY ORB TUL
Finishes
626 605 613 626 605 613
609 612 630 609 612
625 643e 625 643e
Additional Additional Additional
Leadtime Leadtime Leadtime
Function Description 606 629 606
Keyless
D10S Passage $329 $341 $353 $357 $369 $381
D25D Exit
D40S Privacy 407 419 431 435 447 459
D44S Privacy, hospital
D170 Single dummy 149 155 161 163 169 175
Keyed, Single Cylinder
D53PD Entrance
D70PD Classroom $473 $485 $497 $501 $513 $525
D73PD Corridor
D80PD Storeroom
D80PDEL* Electrically locked 757 769 781 785 797 809
D80PDEU* Electrically unlocked
*AC locks: 24V, 0.15 Amps. DClocks: 24V, 0.35 Amps, Intermittent or continuous duty.
D85PD** Faculty Restroom 570 582 594 598 610 622
** Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately.
Keyed, Double Cylinder
D60PD Vestibule/Classroom Security
D66PD Store $567 $579 $591 $595 $607 $619
D72PD Communicating
D82PD Institution
Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price.
2) Keying options: see Keys & Keyi ng.
3) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
14-019 43-005
Standard
Latches
Hsg Specify Add to
Backset Description Dia Springlatch Deadlatch Lock Price
Square corner, 1 1/8" x 2 1/4" — 14-047
2 3/8"
Square corner, 1" x 2 1/4" — 14-048 N/C
Square corner, 1 1/8" x 2 1/4", standard 14-001 14-019
2 3/4" Anti-friction fire door latch 1" — 14-042 $127.00
Square corner, 1 1/8" x 2 1/4", 3/4" throw
3 3/4" Square corner, 1 1/8" x 2 1/4" 14-010 14-028 7.60
5" Backset extension link 43-005* 20.20
— Rabbeted latch and strike kit, 605 and 626 only — 39-030** 36.90
* Must be used with 2 3/4" backset latches.
** This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Notes: 1) Links installed in hollow metal doors require reinforcement. See D-Knobs Parts: Backset Links and
Reinforcements.
2) Links for backsets over 5" are sold as parts. See D-Knobs Parts: S pecial Parts.
10-025 10-013 10-016
Standard
Strikes
Add to
Description Lip Length Specify Lock Price
1 1/8" N/C
Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-013
1 1/2" $5.60
Square corner, T-strike, deep box; used with fire door latch 1 1/8" 10-016 N/C
ANSI, no box, 1 1/4" x 4 7/8", standard 1 3/16" 10-025 N/C
ANSI, no box, 1 1/4" x 4 7/8" 1 3/8", 1 1/2" 10-025 10.30
Box for ANSI strike, must be specified — K510-066 N/C
Note: 3) Electric strike (10-042) is available as a part. See D-Knobs Parts: S trikes.
Primus® / Primus XP
Primus cylinders are offered for sale through specific channels of distribution based on security levels.
See !"#$%&'&()*+,-,)*% for more information.
Description Specify
D-Series Knob single cylinder lock and Primus Lock less cylinder (use L suffix). Order Primus cylinder separately.
cylinder See Cylinders
Example: 1 ea. D53LD
1 ea. 20-548
D-Series Knob double cylinder lock and Primus Lock less cylinders (use C suffix). Order Primus cylinders separately.
cylinder See D Knobs: Complete Cylinders.
Example: 1 ea. D82CD
2 ea. 20-748
D-Series Knob lock and Primus full size Lock less full size core (use J suffix). Order Primus core(s) separately.
interchangeable core cylinder(s)* See Cylinders: Interchangeable Core.
Example: 1 ea. D80JD
1 ea. 20-740
* Double cylinder functions are furnished with construction cores to preserve lock timing. Construction core handling charges
are waived. Cores may be returned for credit. One control key is furnished at no charge. Locks are acknowledged with I suffix.
Note: 2) Primus is not available for Faculty Restroom function (D85).
Special Options
Extended Factory Lead Time Not subject to standard discount terms
Specify
Description Lock Function “X” Number Add to Lock Price
D25x80. Blank plate outside, fixed knob inside. D25x80 XC03-543 $85.70
Key in knob retracts latch. Added to D80
D60 with closed outside knob. D60 XC03-928 N/C
D70x80. Key locks or unlocks outside knob. Key D70x80 XC07-960 43.50
in fixed inside knob retracts latch. Added to D82
D25x70. Blank plate outside. Key locks or D25x70 XC11-577 85.70
unlocks inside knob. Added to D70
Note: 3) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
Knobs, Standard
Designs and Finishes
ORB PLY TUL
605 605 605
612 612 612
Part 625 613 625 613 625
Number Description 626 630 626 630 626 613
04-006 Closed knob $69.80 $81.80 $69.80 $81.80 $69.80 $81.80
04-007 Open knob or Cylinder knob
C503-403 — — 7.50 — —
C503-746 — — — — 7.50
Cylinder sleeve
C503-940 — 7.50 — — —
C603-262 7.50 — — 7.50 —
Roses
Designs and Finishes
TUL
(Use for ORB) PLY
605 605
612 612
Part 625 613 625 613
Number Description 626 630 626 630
04-001 Outside rose $64.30 $76.40 $64.30 $76.40
04-002 Inside rose
14-001 14-019
Latches
Part Number Specify Hsg Price
Springlatch Deadlatch Finish Backset Description Dia Each
— 14-047 • Square corner, 1 1/8" x 2 1/4"
2 3/8" $74.60
— 14-048 • Square corner, 1" x 2 1/4"
14-001 14-019 • Square corner, 1 1/8" x 2 1/4", standard 57.30
1"
2 3/4" Anti-friction Fire Door Latch
— 14-042 • 228.00
Square corner, 1 1/8" x 2 1/4", 3/4" Throw
14-010 14-028 • 3 3/4" Square corner, 1 1/8" x 2 1/4" 68.70
39-030* • — Rabbeted latch and strike kit, 605 and 626 only — 36.90
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Strikes
Part Specify Price
Number Finish Description Lip Length Each
10-013* • Square corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" $7.40
1 1/2" 10.30
10-016 • Square corner, T-strike, deep box, 1 1/8" x 2 3/4" 1 1/8" 15.20
Use with fire door latch
10-025* ANSI, no box, 1 1/4" x 4 7/8", standard 1 3/16" 10.80
•
10-025 ANSI, no box, 1 1/4" x 4 7/8" 1 3/8", 1 1/2" 28.80
K510-066 Box for ANSI strike — 4.70
10-042 • Electric strike, 1 1/4" x 4 7/8", 606 and 626 only — 186.00
* Specify lip length.
04-032
Miscellaneous Parts
Part Specify Price
Number Finish Description Each
A501-167 Threaded rod for mounting D170s as double dummy set $10.70
C100-059 Spindle unit, out and ins - D66 107.00
C100-062 Spindle unit, out - D70, out and ins - D72 107.00
C102-522 • Hub and cap, out (except D80, D80 EL/EU, D82, D85) 63.60
C102-524 • Hub and cap, ins (except D82) 47.60
C102-540 Hub and frame - D25 36.00
C102-541 • Hub and cap, ins - D170 34.80
C102-542 • Hub and cap, out - D80 EL/EU 63.60
C102-570 • Hub and cap, out - D80, D82, D85 101.00
C102-572 • Hub and cap, ins - D82 101.00
C102-837 Locking plug, out - D73 51.30
C102-840 Key spindle - D40, D44, D53, D60 44.50
C203-034 Spindle and catch, ins (except D60, D66, D72, D80EL/EU, D82) 44.00
C203-376 Plug - D85 11.40
C203-390 Spindle and key cam, out - D70, D72 44.50
C203-391 Spindle and key cam - D60 44.50
C203-411 Key spindle and spring - D85 36.40
C203-733 Locking plug - D70, D72 36.40
C203-858 Spindle and hammer, ins - D85 44.50
C203-947 Spindle and catch, out - D40, D44 36.40
C203-948 Spindle and catch, out - D53, D60, D73, D80 36.40
C303-006 Slide and roller 42.20
C303-400 Spindle and catch, ins - D80EL/EU 39.70
C303-439 AC Rectifier 46.70
C503-008 Cotter pin Order in
multiples of 100
0.42
C503-019 Slide spring 4.50
C503-308 Anchor spring (except D25, D170) 4.80
C503-314 Slide spring seat 4.90
C503-324 Spindle washer - D60, D70, D72, D85 4.80
C503-334 Plunger hammer - D85 10.40
C503-335 Plunger hammer spring - D85 4.70
C503-339 Key spindle - D80, D82, D85 19.20
C503-359 Key cam - D60 10.50
C503-360 Key cam rider - D60 10.80
C503-361 Key cam pin - D60 4.70
C503-362 Plunger - D60 4.90
C503-368 Key cam sleeve, out - D70, D72 4.70
Screws
Price Each
(Order in
Part Specify multiples
Number Finish Description Door Thickness Type Size of 100)
A501-171 • D170, washer — Washer — $0.70
A501-746 • D170, mounting screw 1 1/2" – 2" POH Machine 1/4" 20 x 2 1/2" 0.70
C603-256 • ANSI strike — PFH Combo 12-24 x 1" 0.66
C603-897 • Latch and strike — PFH Combo #8 x 3/4" 0.70
Special Parts
Extended Factory Lead Time Not subject to standard discount terms
Part Specify Price
Number Finish Description Each
XC03-069 Extension links, backsets over 5" – 42" $359.00
XQ02-309* • 10-013 Strike, 7/8" flat lip 18.90
10-013 Strike, 1 5/8" – 6" lip 80.00
XQ03-494* •
10-013 Strike, 6 1/8" – 12" lip 102.00
10-025 Strike, 7/8" flat lip 18.90
XQ07-351* •
10-025 Strike, lips thru 6" (except 7/8", 1 3/16", 1 3/8", 1 1/2") 91.60
* Specify lip length.
Note: 2) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
Standard Features*
Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.
Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw
Strike 1/4" x 4 7/8", ANSI, Square corner, no box
Backset 2 3/4"
Cylinder**** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**
Door Range 1 5/8" – 2 1/8" ***
Keys Two nickel silver cut keys per lock, 6-pin, C123 section**
BAA/ARRA For a list of available BAA/ARRA compliant products please contact your local SSC or sales
representative to see the Ingersoll Rand Security Technologies BAA/ARRA catalog.
ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.
Non-Keyed Locks
SCHLAGE ANSI
Keyed Locks
SCHLAGE ANSI
ND25 x 80PD Storeroom Exit Lock ND70 x 80PD Classroom by Storeroom Lock
Blank plate outside. Key in fixed inside lever Key locks and unlocks outside lever.
retracts latch. Specify per XN12-005. Key in fixed inside lever retracts latch.
Specify per XN12-006.
Keyed Locks
SCHLAGE ANSI
ND Levers
Designs and Finishes
ATH OME RHO SPA TLR
626 605 606 613
612 619
Function Description 625 643e
Keyless
ND10S Passage $313 $325 $337
ND12D Exit, lever x lever
ND12D EL or EU* Electrically locked or unlocked 488 500 512
*AC locks: use 24V, 0.15 Amps. DC locks: use 24V, 0.35 Amps. Intermittent or continuous duty.
ND25D Exit, blank plate x lever 313 325 337
ND40S Privacy 362 374 386
ND44S Privacy, hospital
ND170 Single dummy 135 141 147
Keyed, Single Cylinder
ND50PD Entrance/Office
ND53PD Entrance
ND70PD Classroom $428 $440 $452
ND73PD Corridor
ND80PD Storeroom
ND85PD** Faculty Restroom Lock 518 530 542
** Emergency keys must be ordered separately.
ND91PD Vandlgard Entrance/Office
®
Notes: 1) Split designs and/or finishes are available. Split finishes are priced at the highest finish price.
2) Keying options: see Keys & Keying.
3) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
4) For ND30, ND72 and other special functions, see page ND-4.
Latches
Hsg Specify Add to
Backset Description Dia Springlatch Deadlatch Lock Price
2 3/8" Square corner, 1 1/8" x 2 1/4" – 14-047 N/C
Square corner, 1 x 2 1/4" – 14-048 N/C
2 3/4" Square corner, 1 1/8" x 2 1/4", standard 1" 13-048 13-047 N/C
2 3/4" Anti-friction fire door latch 1"
– 14-042 $127.00
Square corner, 1 1/8" x 2 1/4", 3/4" throw
3 3/4" Square corner, 1 1/8" x 2 1/4" 14-010 14-028 7.60
5" Backset extension link 43-005 20.20
— Rabbeted latch and strike kit, 605 and 626 only — 39-030* 36.90
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Notes: 1) ND-Series backset links must be used with 2 3/4" backset latches.
2) Backset links require reinforcement when used in hollow metal doors. See ND-Levers Parts: Accessories.
3) Backset links over 5" are sold as parts. See ND-levers Parts: Special Parts.
4) All ND-Series latches require reinforcement when used on hollow metal doors. See ND-levers Parts: Accessories.
Strikes
Add to
Description Lip Length Specify Lock Price
1 1/8" N/C
Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-013
1 1/2" $5.60
Square corner, T-strike, deep box, fire door latch 1 1/8" 10-016 N/C
ANSI, no box, 1 1/4" x 4 7/8", standard 1 3/16" 10-025 N/C
ANSI, no box, 1 1/4" x 4 7/8" 1 3/8", 1 1/2" 10-025 10.30
Box for ANSI strike, must be specified — K510-066 N/C
Note: 5) Electric strike (10-042) is available as a part.
Athens (ATH) Omega (OME) Sparta (SPA) Rhodes (RHO) Tubular (TLR)
Notes: 1) For ND85, EE range is from over 2" to 6". EI, EO, and ED ranges are from over 1 7/8" to 6".
2) Control keys are not furnished with locks and must be ordered separately. See Keys and Keying.
3) Locks are furnished extended equally (EE) unless otherwise specified.
Primus® / Primus XP
Primus cylinders are offered for sale through specific channels of distribution based on security levels.
See !"#$%&'&()*+,-,)*% for more information.
Description Specify
ND-Series Lever single cylinder lock and Lock less cylinder (use L suffix). Order Primus cylinder separately.
Primus cylinder See Cylinders
Example: 1 ea. ND91LD
1 ea. 20-765
ND-Series Lever double cylinder lock and Lock less cylinders (use C suffix). Order Primus cylinders separately.
Primus cylinder See D Levers: Complete Cylinders.
Example: 1 ea. ND82CD
2 ea. 20-565
ND-Series Lever lock and Primus full size Lock less full size core (use J suffix). Order Primus core(s) separately.
interchangeable core cylinder(s)* See Cylinders: Interchangeable Core.
Example: 1 ea. ND73JD
1 ea. 20-740
Tactile Warning
Add to Lock Price
Description Specify (per lever)
Tactile Warning Preface design code 8AT for Athens,
8RO For Rhodes, trim 8SP for Sparta $32.90
(Not available on Omega )
Notes: 1) Tactile warning is applied to outside ever only unless otherwise specified.
2) 643e finish is not available for tactile offerings
XN12-035
Special Functions
Extended Factory Lead Time Not subject to standard discount terms
Specify Add to
Description Lock Function “X” Number Lock Price
ND25x80. Blank plate outside, fixed lever inside. Key in lever ND25x80 XN12-005 add $85.70 to
retracts latch. ND80
ND60 with closed outside lever. ND60 XN12-001 N/C
ND70x80. Key locks or unlocks outside lever. Key in fixed inside ND70x80 XN12-006 add 44.90 to
lever retracts latch. ND82
ND25x70. Blank plate outside. Key locks or unlocks inside lever. ND25x70 XN12-004 add 85.70 to
ND70
ND72. Double cylinder communicating lock. ND72 XN12-002 add 120.00 to
ND70
ND30D. Patio lock. ND30D XN12-007 add 120.00 to
ND40S
ND72 with Vandlgard ®. (Clutching levers on inside and ND72 Vandlgard® XN12-003 add 120.00 to
outside levers.) ND94
Notes: 1) All above functions are available in standard cylinder, full-size interchangeable core or small format
interchangeable cylinders. See page ND-4.
Antimicrobial Coating
Finish: 626
Description of Components Coated
Add to Lock Price
Inside and Outside Lever and Rose Trim $21.00
Roses
Designs and Finishes
605 606
612 613
Part 619 625
Number Description 626 643e
03-042 Outside or inside rose $64.30
N523-002 Blank plate, ND25 61.70
XN12-035* Word “LOCK” engraved on inside rose (Rhodes) 79.70
XN12-045* Word “LOCK” engraved on inside rose (Omega) 79.70
* Av ailable in 626 on the inside of a double cy linder function. Av ailable on ND60, ND75 and ND95
Latches
Part Number Specify Hsg Price
Springlatch Deadlatch Finish Backset Description Dia Each
— 14-047 • Square corner, 1 1/8" x 2 1/4"
2 3/8" $74.60
— 14-048 • Square corner, 1" x 2 1/4"
13-048 13-047 • Square corner, 1 1/8" x 2 1/4", standard 57.30
— 14-042 • 2 3/4" Anti-friction Fire Door Latch 1" 228.00
Square corner, 1 1/8" x 2 1/4", 3/4" Throw
14-010 14-028 • 3 3/4" Square corner, 1 1/8" x 2 1/4" 68.70
— 43-005 • 5" Backset extension link 20.20
39-030* • — Rabbeted latch and strike kit, 605 and 626 only — 36.90
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Strikes
Part Specify Price
Number Finish Description Lip Length Each
1 1/8" $7.40
10-013* • Square corner, T-strike, box, 1 1/8" x 2 3/4"
1 1/2" 10.40
10-016 • Square corner, T-strike, deep box, 1 1/8" x 2 3/4" 1 1/8" 15.20
Use with fire door latch
10-025* • ANSI, no box, 1 1/4" x 4 7/8", standard 1 3/16" 10.90
10-025* • ANSI, no box, 1 1/4" x 4 7/8" 1 3/8", 1 1/2" 28.80
K510-066 Box for ANSI strike — 4.70
10-042 • Electric strike, 1 1/4" x 4 7/8", 606 and 626 only — 186.00
* Specify lip length.
Reinforcements
Part Price
Number Description Each
37-001* Metal door reinforcer kit, fits both 7/8" and 1" diameter housings $25.00
A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors. 12.60
Fits both 7/8" and 1" diameter housings.
A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors. 12.60
Fits both 7/8" and 1" diameter housings.
Plunger Parts
Part Specify Price
Number Finish Description Each
N123-017 Push and Turn Plunger Bar (ND53, ND85, ND92) $7.90
N123-028 Push Button Plunger Bar (ND30, ND40, ND44 inside, ND50, ND73, ND91, ND97) 42.80
N123-034 • Emergency Button and Plunger (ND40 outside) 44.20
N123-035 • Emergency Turn Button and Plunger (ND44 outside) 82.90
N523-000 • Push Button (ND30, ND40, ND44 inside, ND50, ND73, ND91, ND97) 6.20
N523-001 • Push and Turn Button (ND53, ND92) 11.80
N523-124 • Push Button w/Spanner Access (ND85) 6.90
Screws
Price Each
Part Specify Door (Order in multiples
Number Finish Description Thickness Type Size of 100)
A501-171 • ND170, washer — Washer — $0.70
N523-092 • ND170, mounting screw 1 1/2" – 2" POH Machine 1/4" 20 x 2 1/2" 0.76
N523-133 • ND170, mounting surface — Sheet Metal 1#8 x 1” 4.90
C603-256 • ANSI strike — PFH Combo 12-24 x 1" 0.66
C603-897 • Latch and strike — PFH Combo #8 x 3/4" 0.70
N523-021 Spring cage screws 1 3/8" – 2" PFH Machine #10 x 32 x 2 1/8" 1.10
Special Parts
Extended Factory Lead Time Not subject to standard discount terms
Part Specify Price
Number Finish Description Each
XQ02-309* • 10-013 Strike, 7/8" flat lip $17.80
10-013 Strike, 1 5/8" – 6" lip 80.20
XQ03-494* •
10-013 Strike, 6 1/8" – 12" lip 102.00
10-025 Strike, 7/8" flat lip 18.90
XQ07-351* •
10-025 Strike, lips thru 6" (except 7/8", 1 3/16", 3/8" and 1 1/2") 91.60
XC03-069 • Extension links, backsets over 5" – 42" 359.00
XN12-012 • Chassis Spacer for 1 3/8" door (2 required) 20.20
* Specify lip length.
Note: 2) For Customer Product Request, please see the Schlage Innovation RFQ form on page iv.
Standard Features*
H Knobs and Levers
Certification ANSI A156.12 1999. UL Listed for 3-hour fire door.
Deadbolt 1" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1" throw
Latch 1" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1/2" throw
Strikes 1 1/8" x 2 3/4" Square corner, box (deadbolt) and 1 1/8" x 2 3/4", square corner T-strike, box (latch)
Reinforcement Door frame strike reinforcer with 3" screws
Backset 2 3/8"
Cylinder(s)*** 6-Pin upper cylinder and 6-pin lower cylinder, solid brass, keyed 6-pin, C123 keyway,
keyed different (KD), upper and lower cylinders are keyed alike**
Door Range 1 3/8" – 1 3/4"
Keys Two nickel silver cut keys per lock, 6-pin, C123 section**
H-Series
Knob Style Lever Style
ORB PLY LEV
Finishes Finishes
626 605 613 626 605 613
Additional Additional
Leadtime Leadtime
606 609 612
Function Description 612 625
Keyless
H170 Single dummy $218 $230 $242 $303 $315 $327
Keyed, Single Locking
H110 Entrance $303 $315 $327 $360 $372 $384
Keyed, Double Locking
LEV lever is available as inside trim only on
Keyed, Double Locking functions
Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price.
2) Keying options: see Keys & Keyi ng.
3) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
19-055 19-057
Standard Standard
Deadbolt/Latch Combinations
Specify
Hsg Combo Add to
Backset Description Dia Latch Deadbolt Number Lock Price
Deadbolt/Springlatch Combinations for Single Locking Functions (H110 )
Square corner, 1" x 2 1/4", standard 7/8" 11-068 12-237 19-055
Square corner, 1 1/8" x 2 1/4" 1" 11-068 12-240 19-063*
2 3/8" 1/4" Radius round corner, 1" x 2 1/4" 7/8" 11-069 12-238 19-067
Circular, drive-in, 626 only for bolt, 605 and 626 1" 11-110 12-239 19-056
only for latch N/C
Square corner, 1" x 2 1/4" 7/8" 11-111 12-237 19-059
Square corner, 1 1/8" x 2 1/4" 1" 11-111 12-240 19-065*
2 3/4" 1/4" Radius round corner, 1" x 2 1/4" 7/8" 11-112 12-238 19-068
Circular, drive-in, 626 only for bolt, 605 and 626 1" 11-113 12-239 19-060
only for latch
Deadbolt/Deadlatch Combinations for Double Locking Functions (H153, H180, H185)
Square corner, 1" x 2 1/4", standard 7/8" 11-085 12-237 19-057
Square corner, 1 1/8" x 2 1/4" 1" 11-085 12-240 19-064*
2 3/8" 1/4" Radius round corner, 1" x 2 1/4" 7/8" 11-088 12-238 19-069
Circular, drive-in, 626 only for bolt, 605 and 626 1" 11-104 12-239 19-058
only for latch N/C
Square corner, 1" x 2 1/4" 7/8" 11-091 12-237 19-061
Square corner, 1 1/8" x 2 1/4" 1" 11-091 12-240 19-066*
1/4" Radius round corner, 1" x 2 1/4" 7/8" 11-092 12-238 19-070
2 3/4"
Circular, drive-in, 626 only for bolt, 605 and 626 1" 11-105 12-239 19-062
only for latch
* Includes A501-878 latch front adapter and G506-815 housing sleeve for latch and bolt.
Deadbolt Strikes
Add to
Description Lip Length Specify Lock Price
Square corner, box, 1 1/8" x 2 3/4", standard 10-055
—
Circular drive-in, thimble-strike, 1 3/16" diameter, 494 (for 626) only 10-064 N/C
1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-092
1 1/8"
Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-095
Latch Strikes
Add to
Description Lip Length Specify Lock Price
Square corner, T-strike, box, 1 1/8" x 2 3/4", standard 10-001
1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 10-004
1 1/8"
Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-026 N/C
1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-027
Circular, adjustable, 1 3/4" diameter, 605 and 626 only 1 7/32" 10-058
Strike Combinations
Specify
Latch Deadbolt Combo Add to
Strike Strike Number Lock Price
10-001, 1 1/8" Lip 10-055 10-250
10-001, 1 1/8" Lip 10-064 10-251
10-026 10-055 10-252
10-026 10-064 10-253
10-027 10-055 10-255 N/C
10-027 10-064 10-256
10-027 10-092 10-257
10-058 10-064 10-258
10-026 10-095 10-259
Primus® / Primus XP
Primus cylinders are offered for sale through specific channels of distribution based on security levels.
See !"#$%&'&()*+,-,)*% for more information.
Description Specify
H-Series keyed single locking lock and Primus Lock less cylinder (use L6 suffix). Order Primus cylinder separately.
cylinder See Cylinders
Example: 1 ea. H110L6
1 ea. 20-729
H-Series keyed double locking lock and Primus Lock less cylinders (use L6 suffix). Order Primus cylinders separately.
cylinders See Cylinders
Example: 1 ea. H153L6
1 ea. 20-529
1 ea. 20-524
H-Series lock and Primus full size interchangeable Lock less full size core(s) (use J suffix). Order Primus core(s)
core cylinder(s) separately. See Cylinders: Interchangeable Core.
Example: 1 ea. H180J
2 ea. 20-740
Note: 2) Primus is not available for Hotel function (H185).
Roses
Designs and Finishes
PLY TUL
(use for LEV) (use for ORB)
605 605
Part 613 613
Number Description 626 626
01-001 Outside rose $17.20 $17.20
Escutcheons
Designs and Finishes
MET
605
Part 613
Number Description 626
07-057 Inside escutcheon and turn $80.50
07-035 Inside escutcheon, dummy - H170 56.10
36-056* Outside trim, tie-in escutcheon 26.90
* Also available in 606, 609, 612, and 625 finishes.
Deadbolt/Latch Combinations
Combo Specify Hsg Price
Number Finish Backset Description Dia Latch Deadbolt Each
Deadbolt/Springlatch Combinations for Single Locking Functions (H110)
19-055 • Square corner, 1" x 2 1/4", standard 7/8" 11-068 12-237 $52.60
19-063* • Square corner, 1 1/8" x 2 1/4" 1" 11-068 12-240 54.90
19-067 • 2 3/8" 1/4" Radius round corner, 1" x 2 1/4" 7/8" 11-069 12-238
19-056 • Circular, drive-in, 626 only for bolt, 605 and 1" 11-110 12-239 53.90
626 only for latch
19-059 • Square corner, 1" x 2 1/4" 7/8" 11-111 12-237 53.90
19-065* • Square corner, 1 1/8" x 2 1/4" 1" 11-111 12-240 54.90
19-068 • 2 3/4" 1/4" Radius round corner, 1" x 2 1/4" 7/8" 11-112 12-238
19-060 • Circular, drive-in, 626 only for bolt, 605 and 1" 11-113 12-239 52.60
626 only for latch
Deadbolt/Deadlatch Combinations for Double Locking Functions (H153, H180, H185)
19-057 • Square corner, 1" x 2 1/4", standard 7/8" 11-085 12-237 $52.60
19-064* • Square corner, 1 1/8" x 2 1/4" 1" 11-085 12-240 54.90
19-069 • 2 3/8" 1/4" Radius round corner, 1" x 2 1/4" 7/8" 11-088 12-238
19-058 • Circular, drive-in, 626 only for bolt, 605 and 1" 11-104 12-239 52.60
626 only for latch
19-061 • Square corner, 1" x 2 1/4" 7/8" 11-091 12-237 52.60
19-066* • Square corner, 1 1/8" x 2 1/4" 1" 11-091 12-240 55.00
19-070 • 2 3/4" 1/4" Radius round corner, 1" x 2 1/4" 7/8" 11-092 12-238
19-062 • Circular, drive-in, 626 only for bolt, 605 and 1" 11-105 12-239 52.60
626 only for latch
* Includes A501-878 latch front adapter and G506-815 housing sleeve for latch and bolt.
Note: 1) To price latches separately, see A: Parts. To price deadbolts separately, see below.
Deadbolts
Part Specify Price
Number Finish Backset Description Each
12-237 • Square corner, 1" x 2 1/4", standard $14.10
12-238 • 2 3/8" 1/4" Radius round corner, 1" x 2 1/4" 14.60
12-239 • or Circular, drive-in, 626 finish only 14.60
2 3/4"
12-240* • Square corner, 1 1/8" x 2 1/4" 16.80
* Includes A501-878 latch front adapter and G506-815 housing sleeve.
Deadbolt Strikes
Part Specify Lip Price
Number Finish Description Length Each
10-055 • Square corner, box, 1 1/8" x 2 3/4", standard $12.50
—
10-064 • Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only 10.60
10-092 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.80
10-095 • Square corner, full lip, no box, 1 5/8" x 2 1/4"
Latch Strikes
Part Specify Lip Price
Number Finish Description Length Each
10-001 • Square corner, T-strike, box, 1 1/8" x 2 3/4", standard $6.90
10-004 • 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 7.50
1 1/8"
10-026 • Square corner, full lip, no box, 1 5/8" x 2 1/4" 6.70
10-027 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"
10-058 • Circular, adjustable, 1 3/4” diameter, 605 or 626 only 1 7/32" 6.70
A501-878 G506-815
Adapters
Part Price
Number Description Each
A501-878 Latch front adapter (use with 1" faceplate in 1 1/8" door prep.) Order in multiples of 100
$0.48
G506-815 1" Long latch housing sleeve to adapt 7/8" diameter housing to 1" bore 4.90
A501-565
Miscellaneous Parts
Part Price
Number Description Each
A201-370 Cam & driver - H180 $6.30
A201-399 Hub & cap, out. - H153, H180, H185 20.50
A201-406 Hub & cap, out. - H110 20.50
A301-386 Spindle & catch, ins. 6.40
A301-387 Spindle & catch, out. 6.40
A301-402 Cam unit, out. - H153, H185 6.40
A501-305 Hub plate, ins. 5.00
A501-615 Spindle wedge - H180, H185 4.80
A501-710 Swivel sleeve - H185 4.80
A501-901 Plate, out. - H180, H185 3.40
A508-399 Plate, out. - H110, H153 3.40
A508-597 Spring separator - H153, H180, H185 4.80
A508-598 Frame 7.60
A508-600 Housing 10.60
A508-605 Slide spring 4.80
A590-158 Slide, restoring - H185 4.80
A590-159 Slide, non-restoring - H153, H180 4.80
A590-181 Slide, non-restoring - H110 4.80
C503-008 Cotter pin Order in
multiples of 100
0.42
G105-209 Housing and spindle, RH inside, dummy - H170 19.00
G105-232 Housing and linkage 74.60
G105-249 Housing and spindle, LH inside, dummy - H170 19.00
G570-232 Plug, spindle - H110 8.80
Plunger Units
Part Specify Price
Number Finish Description Each
01-060 • Plunger unit, ins. - H153 $10.00
01-063 • Plunger unit, ins. - H185 21.40
Note: 1) Specify dimension for all plunger units. See chart below for dimension.
Screws
Price Each
Part Specify Door (order in
Number Finish Description Thickness Type Size multiples of 100)
A501-818 Mounting screw, upper cylinder — POH 10-32 x 2 1/16" $0.70
5-pin, 2 required Mach.
E505-315 Mounting screw, lower chassis — POH 10-32 x 1 1/2" 0.84
2 required Mach.
E505-366 Mounting screw, upper cylinder — POH 10-32 x 2 5/16" 0.68
6-pin, 2 required Mach.
Standard Features*
Certifications L/LV9000: ANSI/BHMA Certified A156.13-2005, Series 1000, Grade 1 Operational,
Grade 1 Security, UL Listed for 3-hour fire door (except L9076 and L9077).
With FSIC Interchangeable Core Cylinders: Grade 2 Security.
With SFIC Interchangeable Core Cylinders: Grade 3 Security.
L400: ANSI/BHMA Certified A156.5-2001, Grade 1, UL Listed for 3-hour fire door.
Case Size L/LV9000: 4 7/16" x 6 1/16" x 1"; L400: 4 7/16" x 3 5/8" x 1"
Armor Front L/LV9000: 1 1/4" x 8"; L400: 1 1/4" x 5 9/16"
Deadbolt 1" Throw stainless steel
Latchbolt 3/4" Throw stainless steel with anti-friction tongue
Strike L/LV9000: 1 1/4" x 4 7/8" Square corner, 1 3/16" lip, box; L400: 1 1/8" x 3 5/8" square corner, box
Backset 2 3/4"
Cylinder *** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**
Door Range 1 3/4"
Keys Two nickel silver cut keys per lock, 6-pin, C123 section**
BAA/ARRA For a list of available BAA/ARRA compliant products please contact your local SSC or sales representative to
see the Ingersoll Rand Security Technologies BAA/ARRA catalog.
* Lock s are furnished with standard features unless otherwise specified.
** Items specified in C k ey way will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.
*** For default k ey way please see page I('6&T W .
L9480 Storeroom Lock With Deadbolt L9486 F15 Faculty Restroom Lock with
LV9480 Latchbolt retracted by key outside LV9486 “Do Not Disturb” Indicator
or by lever or knob inside. Outside Latchbolt retracted by key outside
knob/lever always fixed. Deadbolt or by knob/lever inside. Outside
thrown or retracted by key outside knob/lever always fixed. Deadbolt
or thumbturn inside. Turning inside thrown or retracted by inside
knob/lever simultaneously retracts DO NOT DISTURB thumbturn. When deadbolt is thrown,
both deadbolt and latchbolt. “DO NOT DISTURB” plate is
Auxiliary latch deadlocks latchbolt displayed. All keys become
when door is closed. Inside lever is inoperative except emergency or
always free for immediate egress. display keys. Turning inside
(Previously XL11-591) knob/lever retracts both deadbolt
and latchbolt simultaneously.
Auxiliary latch deadlocks latchbolt
L9485 Faculty Restroom Lock when door is closed. Inside lever is
LV9485 Latchbolt retracted by key outside always free for immediate egress.
or by knob/lever inside. Outside
knob/lever always fixed. Deadbolt
thrown or retracted by inside L9486 x L583-375 L9486 With “OCCUPIED”
thumbturn. When deadbolt is thrown, LV9486 x L583-375 Indicator
all keys become inoperative except Latchbolt retracted by key outside
emergency or display keys. or by knob/lever inside. Outside
Turning inside knob/lever retracts knob/lever always fixed. Deadbolt
both deadbolt and latchbolt thrown or retracted by inside
simultaneously. Auxiliary latch OCCUPIED
thumbturn. When deadbolt is thrown,
deadlocks latchbolt when door “OCCUPIED” plate is displayed
is closed. Inside lever is always free and all keys become inoperative except
for immediate egress. emergency keys. Turning inside
knob/lever simultaneously retracts
both deadbolt and latchbolt. Auxiliary
latch deadlocks latchbolt when door is
closed. (Previously XL11-580) Inside
lever is always free for immediate
egress.
L9462 F16 Double Cylinder Lock* L462 E06061 Double Cylinder Lock*
Deadbolt operated by key Deadbolt operated by key
from either side. from either side.
Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price.
2) Keying options: see Keys & Keying.
3) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
4) Add $70. 00 for Vandlgard option. ( LV = Prefix ) Not available with SK1, 41 and 42 knobs.
06L Available in: 07L Available in: 12L Available in: 17L Available in:
605 606 605 606 605 606 605 606
609 612 609 612 609 612 609 612
613 619 613 619 613 619 613 619
625 626 625 626 625 626 625 626
629 630 629 630 629 630 629 630
643e 643e 643e 643e
(Specify
door hand)
Notes: 1) Prices listed are for both full face and concealed cylinder escutcheon trim.
2) Split designs and/or finishes are priced at the highest design and/or finish price.
3) Keying options: see Keys & Keying.
4) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
5) Add $16. 00 per cylinder for the concealed cylinder (C: Suffix).
6) Add $70. 00 for Vandlgard option. ( LV = Prefix ) Not available with SK1, 41 and 42 knobs.
06N Available in: 07N Available in: 12N Available in: 17N Available in:
605 606 605 606 605 606 605 606
609 612 609 612 609 612 609 612
613 619 613 619 613 619 613 619
625 626 625 626 625 626 625 626
629 630 629 630 629 630 629 630
643e 643e 643e 643e
(Specify
door hand)
Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price.
2) Keying options: see Keys & Keying.
3) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
4) Add $70. 00 for Vandlgard option. ( LV = Prefix ) Not available with SK1, 41 and 42 knobs.
Decorative Levers (For suites with F/FA Residential Decorative Levers, see page 18.)
Asti Available in: Merano Available in: Accent Available in: St. Annes Available in:
(AST/AVA) 605 619 (MER/MER) 605 619 (ACC) 605 619 (STA) 605 619
625 626 625 626 625 626 625 626
643e 643e 643e 643e
N)3.99"&*-.7,29."9C.12$2.(5" N)3.99"&*-.7,29."9C.12$2.(5"
(.$0'3*"7&9."29"*-."YB0)*2";&9. (.$0'3*"7&9."29"*-."P.70)&";&9.
Decorative Roses
A Available in: B Available in: Avanti (AVA) Available in: Merano (MER) Available in:
605 619 605 619 605 619 605 619
625 626 625 626 625 626 625 626
643e 643e 643e 643e
Decorative Trim
Lever Designs and Finishes
AST MER ACC STA
LAT LON (LAT & LON NOT IN 605)
LAT LON new in 2010 - call for availability
Add $70 Rose 00L Rose 00L
for 626 626 605 605
Vandlgard 619 625 619 625
Function Option Description 643e 643e
Keyless
L9010 Passage $557 $596 $569 $608
L9040 • Privacy 639 670 651 682
L9440 • Privacy w/ deadbolt 731 767 743 779
L0170 Single dummy 198 226 204 232
L0172 Double dummy 402 437 414 449
L9175 Single dummy w/ case 297 339 303 345
L9176 Double dummy w/ case 484 516 496 528
Keyed Single Cylinder
L9050P • Office $710 $736 $722 $748
L9056P • Office w/ simult. retraction 775 806 787 818
L9070P • Classroom
L9076P • Classroom Holdback 710 736 722 748
L9080P • Storeroom
L9080PEL • Electrically locked 986 1023 998 1035
L9080PEU • Electrically unlocked
L9453P • Entrance w/ deadbolt
L9456P • Corridor w/ deadbolt 732 766 744 778
L9465P Closet/Storeroom w/ deadbolt
L9473P Dorm/Bedroom w/ deadbolt
L9480P • Storeroom w/ deadbolt 796 827 808 839
L9485P* • Faculty Restroom 775 806 787 818
L9496P • Privacy w/ deadbolt and 836 870 848 882
Occupied Indicator
* Specify door hand for hotel locks. Faculty Restroom function locks are furnished 0-bitted with two
6-pin keys unless otherwise specified. Emergency keys must be ordered separately.
Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price.
2) Split rose trim by escutcheon trim is not available.
3) Specify door hand for all lever designs.
4) Keying options: see Keys & Keying.
5) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
6) Add $16. 00 per cylinder for the concealed cylinder (C: Suffix).
7) Add $70. 00 for Vandlgard option. ( LV = Prefix )
(2 1/8" Diameter)
All lever styles are available in Satin Stainless Steel finish (630) only.
10-072 10-073
Standard Deadbolt Standard
Strikes, L9000-Series
Add to
Description Lip Length Specify Lock Price
1 1/4" x 4 7/8" Square corner, box, standard 1 3/16" 10-072 N/C
7/8", 1", 1 1/2" N/C
1 1/4" x 4 7/8" Square corner, box 10-072
1 3/4", 2" $21.40
Deadbolt lock strike, L9460, L9462, L9463, L9464, standard — 10-073 N/C
1/2" Rabbeted — 10-075* 74.50
Strike frame reinforcer — 37-015 N/C
One hole for latching functions, RH & LHR doors 1 3/16" XL11-820 9.10
One hole for latching functions, LH & RHR doors 1 3/16" XL11-821 9.10
Extended Factory Lead Time
* For 1 3/4" thick doors, use with 1 1/16" wide armor fronts. For over 1 3/4" – 2 1/4" thick doors extended equally (EE), use
with 1 1/4" wide armor fronts.
10-079 10-078
Standard
Strikes, L400-Series
Add to
Description Specify Lock Price
1 1/4" x 4 7/8" Square corner, box 10-078
1 1/8" x 3 1/2" Square corner, box, standard 10-079 N/C
ANSI A115.5 preparation
L583-363
ADA Thumbturn
ADA Thumbturn
Description Specify Add to Lock Price
Disability turn (ADA) option Lock function and L583-363 (Previously XL11-800) $11.60
Notes: 1) Available with all thumbturn functions except L9463 and L463. For L463 and L9463 see special parts.
2) ADA thumbturn must be ordered with 09-509, 09-633 or 09-634 as a complete unit. (See L-33 and L-36)
3) Not available with SK1, XL11-000 Anti-ligature option
Full Size
Interchangeable Core
Lead Lining
Description Specify Add to Lock Price
1/8" Thick lead plate installed on case cover, L9000 Lock function, door hand and XL11-515 $244.00
1/8" Thick lead plate installed on case cover, L400 Lock function, door hand and XL12-216 244.00
Notes: 3) Locks less lock case are furnished less cylinder(s), armor front, and strike. Included are complete sets of outside and
inside trim with spring cages, spindles, mounting screws and thru-bolts as required for the function specified.
4) Deductions are applied to complete lock prices.
5) Not available with SK1, XL11-000 Anti-ligature trim.
Locks available with Request to Exit (RX) feature. L283-239 available in 2010. Switch with three 219.00
Functions LV9050, LV9070, LV9071, LV9076, LV9077, wires. Select Normally Open or Normally Closed
LV9080, LV9080EL, LV9080EU, LV9056, LV9060, during installation. Previously L283-197 for NC
LV9071, LV9453, LV9456, LV9457, LV9485 and L283-196 for NO.
Latch monitoring with RX (Request to exit) Must order XL12-245 for L9080PEL 189.00
in addition to RX feature. Only available with XL12-246 for L9080PEU.
L9080EL/EU
Tactile Warning
Notes: 2) Tactile warning is applied to outside lever only unless otherwise specified.
Special Options
Extended Factory Lead Time Not subject to standard discount terms
Specify
Description Lock Function “X” Number Add to Lock Price
Solid latchbolt (nylon insert), for use with electric strikes As required XL11-422 $47.70
L9040 with thumbturn both sides (not available with L9040 XL11-446 52.50
N Escutcheon trim).
L9080 EL or EU with pigtail of 5 feet. L9080 EL XL11-463 44.00
L9080 EU
L9482* (L9082 with deadbolt). L9482 XL11-543 87.90
Added to L9082
L9485 prison function lock. Latch retracted by key outside or L9485 XL11-557 142.00
knob inside. Outside knob always free-spinning. Deadbolt only Added to L9485
thrown or retracted by guards key. Inside knob becomes fixed
when deadbolt is thrown. Prisoners key only retracts latchbolt.
Furnished standard with Torx® screws.
L9460 with fixed double dummy trim. L9460 XL11-635 Same price as L9456
L9463 or L463 with B100-Series style thumbturn. L9463/L463 XB11-720 26.70
L9110 active double dummy trim. L9110 XL11-741 Same price as L9010
Armor front with cutout to receive deadbolt only, for use with L9110, L9175, XL11-743 58.70
dummy functions. L9176
L9460 with trim. Inside knob or lever retracts deadbolt. L9460 XL11-886 Same price as L9456
Outside knob or lever fixed.
L9462 with trim. Inside knob or lever retracts deadbolt. L9462 XL11-886 Same price as L9082
Outside knob or lever fixed.
L9464 with trim. Inside knob or lever retracts deadbolt. L9464 XL11-886 Same price as L9456
Outside knob or lever fixed.
L9412 Exit lock with deadbolt for escutcheon designs only. L9412 XL11-907 Same price as L9080
Special function, L9066 Store Lock, both levers locked or L9060 XL11-897 14.00
unlocked by key in either lever.
Note: 1) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
Antimicrobial Coating
Finishes: 626AM or 630AM
Description of Components Coated Add to Lock Price
Rose Trim Inside: Lever, Bushing, Rose, and Thumbturn
A or B Outside: Lever, Bushing, Rose, Deadbolt $31.50
Escutcheon Trim Inside: Lever, Bushing, Escutcheon, Thumbturn
L or N Outside: Lever, Bushing, Escutcheon, Face plate 31.50
Orderi ng notes for Anti mi crobi al Coati ngs:
1) Extended Factory Lead Times Apply. Please place antimicrobial coated orders separately, and allow 30 days
for manufacturing.
2) Please specify 626AM or 630AM on each line item requiring antimicrobial coating.
3) For ease of identification, a sticker will be applied to a non-visible location on product.
4) For additional product finishes or styles, please use the Custom Product Request Process.
Lock Cases
Order in multiples of 10
Vandlgard Price
Function Option Available Description Each
L9010B Passage $113.00
L9040B • Privacy 166.00
L9050LB • Office
L9070LB • Classroom 184.00
L9080LB • Storeroom
L9453LB • Entrance
L9456LB • Corridor
207.00
L9465LB Closet/Storeroom
L9473LB Dormitory/Bedroom
Strikes
Distributor Pack Part Price
Description Lip Length Number (box of 10) (per box)
1"
10 each 10-072, 1 1/4" X 4 7/8", Square corner, no box 1 3/16" 09-494 $143.00
1 1/2"
Notes: 3) Specify finish and lip length. 1 3/16" lip strike will be furnished unless otherwise specified.
4) Strike box included with Distributor Pack trim sets.
These miscellaneous parts in bulk quantities may be ordered under the Distributor Pack Program. Part numbers
represent bulk quantities as shown below.
Escutcheon Thru-Bolts
Distributor Pack
Part Number Price
Description (box of 50) (per box)
50 each L Escutcheon thru-bolts 09-483 $195.00
Notes: 1) Specify finish.
2) Specify door thickness: 1 3/8", 1 3/4", 2", 2 1/4", or 2 1/2".
3) Escutcheon thru-bolts are packed 50 units to a box.
(Quantity of 1 = box of 50 thru-bolts.)
Mounting Posts
Distributor Pack
Part Number Price
Description (box of 50) (per box)
50 each Mounting posts for L 09-488 $390.00
50 each Mounting posts for LV Contact Technical Support
Notes: 4) Specify door thickness: 1 3/8", 1 3/4", 2", 2 1/4", or 2 1/2".
5) Mounting posts are packed 50 units to a box.
(Quantity of 1 = box of 50 mounting posts.)
6) LV mounting posts are required for all Vandlgard® applications. See page L-37.
Mounting Screws
Distributor Pack
Part Number Price
Description (box of 100) (per box)
100 each Mounting screws (L583-066) 09-493 $30.00
Note: 6) Mounting screws are packed 100 units to a box.
(Quantity of 1 = box of 100 mounting screws.)
Levers
Designs and Finishes
01 02 05 03** 06 07 AST* ACC LAT***
18 12* 17 OME † MER* STA LON***
605 605
606 612 613 619
Part 619 625 629 625
Number Description 626 626 630 626
09-401 Outside lever $110.00 $116.00 $122.00 $139.00
09-402 Inside lever & bushing
Knobs
Designs and Finishes
41 42
613
Part 605 606 612 629
Number Description 619 625 626 630
09-401 Outside knob $77.20 $87.60
09-402 Inside knob & bushing
Extended Factory Lead Time
Note: 2) Specify part number, complete design application, and finish.
Example: 09-402 42L 605, inside 42 knob for use with an L Escutcheon.
Roses
Designs and Finishes
AVA
A B MER
605 605 619
606 612 613 606 612 613 626
Part 619 625 629 619 625 629 605
Number Description 626 630 626 630 625
09-403 Inside rose $59.60 $83.60 $68.20 $92.20 $85.00
09-404 Outside rose & bushing 64.60 88.60 75.30 99.30 93.20
09-508 Blank outside rose 80.30 104.30 83.90 107.90 —
N Escutcheons
Finishes
605 606
Part 619 625 612 629
Number Description 626 630
Outside Escutcheon & Bushing
09-636 Blank x knob or lever
09-637 Emergency turn x knob or lever $93.00 $105.00
09-639 Full face cylinder x knob or lever
Inside Escutcheon
09-632 Blank x knob or lever
09-633* Thumbturn x knob or lever $89.00 $101.00
09-635 Full face cylinder x knob or lever
* Specify door thickness: 1 3/8" or 1 3/4". Available with disability turn (ADA) option. Specify L583-363 and add $11. 60.
Notes: 4) Specify part number, complete design application and finish.
Example: 09-636 42N 626, N Escutcheon for use with a 42 knob.
5) For blank N Escutcheons, see S pecial Parts.
6) Thru-bolts are furnished with inside escutcheons.
Strikes, L9000-Series
Part Specify Lip Price
Number Finish Description Length Each
10-072* • 1 1/4" x 4 7/8" Square corner, box, standard 1 3/16" $14.30
7/8", 1", 1 1/2" 14.30
10-072* • 1 1/4" x 4 7/8" Square corner, box
1 3/4", 2" 36.50
10-073 • Deadbolt lock strike, box, L9460, L9462, L9463, L9464, standard — 17.50
10-075** • 1/2" Rabbeted — 94.50
10-091*** • 1 1/4" x 8" Square corner, armor strike, no box 1 3/16" 63.80
K510-066 Strike box — 4.70
37-015 Door frame strike reinforcer — 15.90
* Specify lip length.
** For 1 3/4" thick doors, use with 1 1/16" wide armor fronts. For over 1 3/4" – 2 1/4" thick doors extended equally (EE), use
with 1 1/4" wide armor fronts.
*** Specify hand of inactive door.
Note: 1) For special strikes, see S pecial Parts.
10-078 10-079
Strikes, L400-Series
Part Specify Price
Number Finish Description Each
10-078 • 1 1/4" x 4 7/8" Square corner, box
1 1/8" x 3 1/2" Square corner, box, standard $14.30
10-079 •
ANSI A115.5 preparation
K510-053 Strike box for 10-079 strike 4.80
K510-066 Strike box for 10-078 strike
!"#$%&'&%#$()*#(+,%
-./0121314
Cylinder Turns
Part Specify Price
Number Finish Description Dimension Each
09-900 • Classroom turn 1 1/8", 1 1/4", 1 3/8" $76.00
1 1/2", 1 5/8", 1 3/4" 117.00
09-904 • Classroom turn with compression ring 1 1/8", 1 1/4", 1 3/8" 82.70
1 1/2", 1 5/8", 1 3/4" 123.70
09-905 • Classroom turn with compression ring and 1/8" blocking 1 1/8" 90.80
ring, 1 3/4" doors
09-907 • Classroom turn with compression ring and 1/4" blocking 1 1/8" 90.80
ring, 1 3/8" doors
Notes: 1) Specify dimension for cylinder turns, and door hand if for use with L463 or L9463. If handing is not required, specify
NH (non-handed).
2) For special cylinder turn, see S pecial Parts.
3) Not available in 629 and 630 finish.
Occupancy Indicators
Part Specify Price
Number Finish Description Each
09-611 • Occupancy indicator for rose trim reading “DO NOT DISTURB” $72.60
Note: 4) Available with “Occupied” indicator option. Specify with L583-375 and add $13. 50.
5) Available with lock indicator function. Specify with XL11-986 and add $13. 50.
L-36 Price Book 71
Effective April 5, 2010
Escutcheon Thru-Bolts, Mounting Posts,
Spindles & Springs, Electrified Lock Kits Parts • L
Escutcheon Thru-Bolts
Part Specify Door Price
Number Finish Description Thickness Each
L583-119 • 1 3/8"
L583-120 • 1 3/4" $3.90
L583-121 • L Escutcheon thru-bolts 2"
L583-122 • 2 1/4"
L583-123 • 2 1/2" 4.20
K510-389 • 1 3/4"
N Escutcheon thru-bolts 4.60
K510-390 • 2" – 2 1/4"
L583-287 • L Escutcheon mounting screws, L0170 single dummy — 7.10
L583-133 • N Escutcheon mounting screws, L0170 single dummy — 3.60
Note: 1) Two required per lock.
Lock Cases
Part Price
Number Lock Function and Description Each
L9076, Classroom holdback
L283-039 $237.00
L9077, Classroom security holdback
L9440, Privacy with deadbolt
L283-062 213.00
L9444, Privacy with deadbolt and coin turn
L283-085 L9082 EL, Electrically locked 766.00
L283-086 L9082 EU, Electrically unlocked 766.00
L283-099 L460, L462, L463, L464, L480, L496, Deadbolt 143.00
L283-126 L9056, Entrance w/ simultaneous retraction 237.00
L283-131 L9010, Passage 136.00
L9040, Privacy
L283-132 201.00
L9044 Privacy with Coin turn
L9050, Office
L9060, Apartment entrance
L283-133 237.00
L9070, Classroom
L9071, Classroom security
L283-134 L9080, Storeroom 237.00
L283-137 L9453, Entrance 261.00
L9456, Corridor
L283-138 L9457, Classroom security 261.00
L9496, Privacy w/ “Occupied” indicator
L283-139 L9460, L9462, L9463, L9464, Deadbolt 179.00
L9465, Closet
L283-140 L9466, Storeroom 261.00
L9473, Dormitory
L9480, Storeroom with deadbolt
L283-141 L9485, Faculty Restroom 327.00
L9486, Faculty Restroom
L283-142 L9080 EL, Electrically locked (Fail Safe) 766.00
L283-143 L9080 EU, Electrically unlocked (Fail Secure) 766.00
L283-144 L9175, Single dummy 203.00
L283-145 L9176, Double dummy 203.00
L283-146 L9082, Institution 237.00
Note: 1) Includes lock case only. Armors, strikes, mounting screws, and cylinders must be ordered separately.
2) All lock cases are shipped right hand.
LV Lock Cases
Part Price
Number Lock Function and Description Each
L283-170 LV9050, Office and Inner Entry Lock
$296.00
LV9060, Apartment Entrance Lock
LV9070, Classroom Lock
LV9071, Classroom Security Lock
L283-171 LV9040, Bath/Bedroom Privacy Lock
261.00
LV9044, Privacy Lock With Coin Turn Outside
L283-172 LV9076, Classroom Holdback Lock
296.00
LV9077, Classroom Security Holdback Lock
L283-173 LV9080, Storeroom Lock 296.00
L283-174 LV9080EL, Electrically Locked (Fail Safe) 800.00
L283-175 LV9080EU, Electrically Unlocked (Fail Secure) 800.00
L283-176 LV9453, Entrance Lock 319.00
L283-177 LV9456, Corridor Lock
LV9457, Classroom Security Lock 319.00
LV9496, L9486 Lock With "OCCUPIED" Indicator
L283-178 LV9480, Storeroom Lock With Deadbolt
LV9485, Faculty Restroom 382.00
LV9486, Faculty Restroom w/"Do Not Disturb" Indicator
L283-180 LV9056, L9050 Lock With Simultaneous Retraction 296.00
L283-181 LV9440, Privacy Lock With Deadbolt 273.00
LV9444, Privacy Lock With Deadbolt and Coin Turn Outside
L283-182 LV9082, Institution Lock 296.00
Miscellaneous Parts
Part Price
Number Description Each
36-080 O-ring, L9080 EL/EU $1.90
39-042 Plastic lock case cover for display - for locks manufactured after January, 1998 60.40
K110-550 Pack of truarc ring (1), spacer (2), knobs 5.40
K510-320 Wood plug, dummy, L0170, L0172 5.60
K510-842 Electrified lock bushing, L9080 EL/EU .70
L283-003 Deadbolt (except L9453, L9465, L9466, L9473) 36.80
L283-004 Entrance deadbolt, L9453 36.80
L283-006 Auxiliary latchbolt assembly 11.60
L283-008 Latchbolt assembly (except L9076) 36.80
L283-010 Locking link, L9076 11.90
L283-029 (2) Spacers for ANSI A115.1 metal door preparations 23.60
L283-030 Pack of 20 truarc rings, levers 13.80
L283-031 Mounting plate, inside lever 12.80
L283-040 Spring cage (1 required per lever) 6.30
L283-049 Latchbolt assembly, L9076 36.80
L283-055 Cylinder retainer plate and screw - for locks manufactured after April, 1994 11.60
L283-057 (2) Mounting Post, (2) Screws, L-series, OSU 18.30
L283-075 Deadbolt, L9465, L9466, L9473 36.90
L283-112 Lock case, L9000-Series - for locks manufactured after January, 1998. 36.90
L283-127 Lock case and cover, L400-Series 53.00
L283-128 Lock case, L400-Series. See L283-127 for sellable part. —
L283-150 Mounting plate for inside rose trim on one side of door only 25.70
L583-004 Standoff post 1.40
L583-015 Latchbolt guide 2.40
L583-019 Retractor hub (2 required per lock) 5.50
L583-020 Retractor hub spacer 2.90
L583-021 Retractor lever 2.50
L583-022 Retractor rocker 1.90
L583-023 Blocking plates 2.40
L583-024 Retractor link 5.00
L583-025 Retractor crank 5.00
L583-026 Hub spring 1.10
L583-027 Fire door fuse 1.40
L583-028 Fire door catch 1.90
L583-029 Turn hub 12.50
L583-030 Entrance hub 17.50
L583-031 Cam follower 6.80
L583-035 Turn hub spring 2.40
L583-038 Auxiliary bar guide 1.80
L583-043 Locking catch, L9080 EL/EU 12.50
L583-044 Stop spring 1.20
L583-045 Locking catch (except L9080 EL/EU) 12.80
L583-047 Catch spring 2.90
L583-048 Locking link (except L9076) 2.90
L583-049 Entrance link 4.80
Miscellaneous Parts
Part Price
Number Description Each
L283-040 Spring Cage (1 required per lever) $6.30
Special Parts
Extended Factory Lead Time Not subject to standard discount terms
Part Specify Price
Number Finish Description Each
XL11-422 Solid latchbolt (nylon insert), for use with electric strikes $47.70
XB11-720 • Mortise cylinder turn unit with ADA compliant style thumbturn 26.70
Added to 09-900,
09-904, 09-905 or
09-907
XL12-196 • Mortise cylinder turn unit with coin turn 25.50
Added to 09-900
XK10-992* • 10-072 Strike over 2" thru 6" lip 91.60
XL11-515 1/8" Thick lead plate. Also specify lock function and door hand 244.00
XL11-634 • Blank inside L Escutcheon 140.00
XL11-636 • Blank outside L or N Escutcheon 192.00
XL11-743 • Armor front with cutout to receive deadbolt only, for use with L9110, L9175 and 58.70
L9176 dummy functions.
XL11-778 Locked/Unlocked sign for rose trim thumbturns 9.00
XL11-820 • Strike, 1 3/16" lip, one hole for latching functions, RH & LHR doors 18.90
XL11-821 • Strike, 1 3/16" lip, one hole for latching functions, LH & RHR doors
* Specify lip length. 625 used for 629 finish and 626 used for 630 finish.
Note: 2) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
Standard Features*
Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.
Latch 1" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1/2" throw
Strike 1 1/8" x 2 3/4", Square corner, T-strike, box
Backset Dual backset latch, fits either 2 3/8" or 2 3/4" backsets
Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**
Door Range 1 3/8" – 2" (except S40D: 1 3/8" – 1 7/8")
Keys Two nickel silver cut keys per lock, 6-pin, C123 section**
ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.
Non-Keyed Locks
SCHLAGE ANSI
Keyed Locks
SCHLAGE ANSI
S-Series
Lever Style
FLA* SAT JUP NEP
Finishes
626 605 606 613
619 625
Additional
Leadtime
Function Description 609
Keyless
S10D Passage $155 $167 $179
S40D Privacy 183 195 207
S170 Single dummy 74 80 86
Keyed
S51PD Entrance
S70PD Classroom $243 $255 $267
S80PD Storeroom
Z% H @$-. C0 % 9>>3% F"79% Q F$7% >39$3. 7:% ,KE% 9$;. :7Y % H @$-. C0 % F"79% >C% / $J $3% C>3% H T]SY
Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price.
2) Keying options: see Keys & Keyi ng.
3) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
16-203 16-204
Standard
Deadlatches
Hsg Add to
Backset Description Dia Specify Lock Price
2 3/8" or Square corner, 1" x 2 1/4", standard 16-203* N/C
2 3/4" 1/4" Radius round corner, 1" x 2 1/4" 7/8" 16-204
5" Square corner, 1" x 2 1/4" 16-132* $7.70
— Rabbeted latch and strike kit, 605 and 626 finishes only — 39-030** 36.90
* Latch includes A501-878 latch front adapter for 1 1/8" preparation, and G506-815 housing sleeve for 1" housing.
** This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Note: 1) Failure to use the above referenced latches and fire cup S605-206 included with the lockset will invalidate the UL
Listing.
Strikes
Add to
Description Lip Length Specify Lock Price
Square corner, T-strike, box, 1 1/8" x 2 3/4", standard 1 1/8" 10-001 N/C
Square corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 10-001 $5.60
1 1/2", 1 3/4", 2"
1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" 10-004 N/C
ANSI, no box, 1 1/4" x 4 7/8" 1 3/16" N/C
10-025
1 3/8", 1 1/2" 10.10
Box for ANSI strike, must be specified — K510-066
Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-026 N/C
1 1/8"
1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-027
Notes: 2) Electric strike (10-042) is available as a part. See S Parts: S tri kes.
3) Strikes with long-lip lengths are sold as parts. See S Parts: S peci al Parts.
Primus®
Primus cylinders are offered for sale through specific channels of distribution based on security levels. See !"#$%
'&()*+,-,)*% for more information.
Description Specify
S-Series lock and Primus cylinder Lock less cylinder (use L suffix). Order Primus cylinder
separately. See S: Complete Cylinders.
Example: 1 ea. S51LD
1 ea. 20-752
S-Series lock and Primus full size interchangeable core Lock less full size core (use J suffix). Order Primus core
cylinder separately. See Cylinders: Interchangeable Core.
Example: 1 ea. S80JD
1 ea. 20-740
Tactile Warning
Add to Lock Price
Description Specify (per lever
Knurling Preface the design code with 8 $32.90
Example: 8SA for SAT
Levers, Standard
Designs and Finishes
JUP NEP SAT FLA*
605 606 613
619 625 626
Additional Leadtime
Number Description 609
08-020 Cylinder lever $46.50
* Specify hand of lever when ordering FLA design.
Roses
Designs and Finishes
SAT
(use for all designs)
605
606
613
619
625
626
Part Additional Leadtime
Number Description 609
08-021 Inside rose $17.10
Trim Combinations
Designs and Finishes
JUP NEP SAT FLA*
605 606 613
619 625 626
Part Additional Leadtime
Number Description 609
Inside Chassis and Lever
68-011 S10, S70, S80 $72.60
68-012 S40 81.00
68-013 S51 81.00
Outside Chassis, Rose and Lever
68-001 S10 $67.80
68-002 S40 70.60
Outside Chassis and Rose
68-003** S51, S70 $51.60
68-004** S80 51.60
* Specify hand of lever when ordering FLA design.
** Available in SAT design only.
Deadlatches
Specify Hsg
Part Number Finish Backset Description Dia Price Each
16-203* • 2 3/8" or Square corner, 1" x 2 1/4", standard $24.10
16-204 • 2 3/4" 1/4" Radius round corner, 1" x 2 1/4" 7/8"
16-132* • 5" Square corner, 1" x 2 1/4" 30.80
39-030** • — Rabbeted latch and strike kit, 605 and 626 only — 36.90
* Latch includes A501-878 latch front adaper for 1 1/8" preparation and G506-815 housing sleeve for 1" housing.
** This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Note: 1) Failure to use the above referenced latches and fire cup S605-206 included with the lockset will invalidate the UL
Listing.
Strikes
Part Specify Price
Number Finish Description Lip Length Each
10-001* • Square corner, T-strike, box, 1 1/8" x 2 3/4", standard 1 1/8" $6.90
10-001* • Square corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 9.80
1 1/2", 1 3/4", 2"
10-004 • 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" 7.50
1 3/16" 10.80
10-025* • ANSI, no box, 1 1/4" x 4 7/8"
1 3/8" 28.80
K510-066 Box for ANSI strike — 4.70
10-026 • Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.80
10-027 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.80
10-042 • Electric strike, 1 1/4" x 4 7/8", 606 and 626 only — 186.00
* Specify lip length.
Adapters
Part Specify Price
Number Finish Description Each
38-018 • Thin door extension ring (2 required per lock) $8.40
A501-878 Latch front adapter (use with 1" faceplate in 1 1/8" door prep.) Order in multiples of 100
0.48
G506-815 1" Long latch housing sleeve to adapt 7/8" diameter housing to 1" bore 4.90
Screws
Price Each
Part Specify (Order in
Number Finish Description Type Size multiples of 100)
C603-256 • ANSI strike PFH Combo 12-24 x 1" $0.66
C603-897 • Latch or standard strike PFH Combo 8-32 x 3/4" 0.70
F506-278 Mounting RPH Mach. 8-32 x 1 1/2" 0.70
F506-237 Mounting Wood #8 x 3/4" 0.50
Special Parts
Extended Factory Lead Time Not subject to standard discount terms
Part Specify Price
Number Finish Description Each
10-025 Strike, 7/8" flat lip $18.90
XQ07-351 •
10-025 Strike, lips through 6" (except 7/8",1 3/16",1 3/8" and 1 1/2") 91.60
Notes: 2) Specify lip length.
3) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
Standard Features*
Certification ANSI/BHMA Certified A156.12-2005, Grade 2, UL Listed for 3-hour fire door.
Deadbolt 1 x 2 1/4", Square corner faceplate, 1" housing diameter, 1" throw
Deadlatch 1 x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw
Strikes 1 1/8" x 2 3/4", Square corner, box (deadbolt) and 1 1/8" x 2 3/4", Square corner, T-strike, box
(deadlatch)
Reinforcement Metal dust box reinforcer with three – 3" screws
Backset Adjustable for 2 3/8" or 2 3/4"
Cylinder(s)*** 6-Pin upper cylinder and 6-pin lower cylinder, solid brass, keyed 6-pin, C123 keyway, keyed different
(KD) — upper and lower cylinders are keyed alike**
Door Range 1 3/8" – 2"
Keys Two nickel silver cut keys per lock, 6-pin, C123 section**
S200-Series
Lever Style
FLA* SAT JUP NEP
Finishes
626 605 606 613
619 625
Additional
Leadtime
Function Description 609
Keyless
S290 Single dummy $195 $207 $219
Keyed, Single Locking
S210PD Entrance $313 $325 $337
Keyed, Double Locking
S251PD Entrance
S270PD Classroom $390 $402 $414
S280PD Storeroom
Z H @$-. C0 % 9>>3% F"79% Q F$7% >39$3. 7:% ,KE% 9$;. :7Y
Notes: 1) Split designs and/or finishes are priced at the higher design and/or finish price.
2) Upper and lower cylinders will be keyed alike unless otherwise specified.
3) Keying options: see Keys & Keyi ng.
4) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
16-481
Standard
Deadbolts/Deadlatches
Specify
Hsg Combo Add to
Backset Description Dia Deadbolt Deadlatch Number Lock Price
2 3/8" Square corner, 1" x 2 1/4", Standard 12-288 16-480 16-481
or Round corner, 1" x 2 1/4" 12-289 16-204 16-482 N/C
2 3/4" Square corner, 1 1/8" x 2 1/4" 1" 12-291 16-228 16-483
Square corner, 1 1/8" x 2 1/4", deadbolt,
5" 12-633 16-132* 16-484 $20.00
and square corner, 1" x 2 1/4", deadlatch
- Rabbeted latch & strike kit, 605 or 626 only - - 39-030** 34.80
* Includes G506-815 housing sleeve for latch and bolt for 1 1/8" preparation.
** This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.
Note: 5) Failure to use the above referenced deadlatches and deadbolts with the lockset will invalidate UL listings and the ANSI
Grade 2 certification.
Deadbolt Strikes
Add to
Description Lip Length Specify Lock Price
Square corner, box, 1 1/8" x 2 3/4", standard 10-094
—
Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only 10-064 N/C
1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-092
1 1/8"
Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-095
Deadlatch Strikes
Add to
Description Lip Length Specify Lock Price
Square corner, T-strike, box, 1 1/8" x 2 3/4", standard 10-001
Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-026 N/C
1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-027
Circular, adjustable, 1 3/4" diameter, 605 and 626 only 1 7/32" 10-058
Strike Combinations
Specify
Deadbolt Combo Add to
Strike Deadlatch Strike Number Lock Price
10-094 10-001, 1 1/8" Lip 10-109
10-064 10-001, 1 1/8" Lip 10-251
10-094 10-026 10-110
10-064 10-026 10-253
10-094 10-027 10-111 N/C
10-064 10-027 10-256
10-092 10-027 10-257
10-064 10-058 10-258
10-095 10-026 10-259
Primus® / Primus XP
Primus cylinders are offered for sale through specific channels of distribution based on security levels.
See !"#$%&'&()*+,-,)*% for more information.
Description Specify
S200-Series keyed single locking lock and Primus cylinder Lock less cylinder (use L suffix). Order Primus cylinder
separately. See Cylinders
Example: 1 ea. S210LD
1 ea. 20-529
S200-Series keyed double locking lock and Primus cylinders Lock less cylinder (use L suffix). Order Primus cylinder(s)
separately. See Cylinders
Example: 1 ea. S251LD
1 ea. 20-729
1 ea. 20-752
S200-Series lock and Primus full size interchangeable core Lock less full size core(s) (use J suffix). Order Primus core(s)
cylinder(s) separately. See Cylinders: Interchangeable Core.
Example: 1 ea. S280JD
2 ea. 20-740
Levers, Standard
Designs and Finishes
JUP NEP SAT FLA*
605 606 609
613 619 625
Number Description 626
08-020 Cylinder lever $48.80
Escutcheons
Designs and Finishes
SAT
FLA (use for JUP and NEP) MET
605 605 605
606 606 606
609 609 609
613 613 613
619 619 619
Part 625 625 625
Number Description 626 626 626
08-032 Inside escutcheon assembly $75.30 $75.30 —
36-056 Outside trim, tie-in escutcheon — — $27.00
Trim Combinations
Designs and Finishes
JUP NEP SAT FLA*
605 606 613
619 625 626
Part Additional Leadtime
Number Description 609
Outside Chassis, Rose and Lever
68-001 S210 $67.80
Outside Chassis and Rose
68-003** S251, S270 $51.60
68-004** S280 51.60
Inside Chassis and Lever
08-034 S210, S270, S280 $69.70
08-035 S251 77.60
12-288
Deadbolts
Part Specify Price
Number Finish Backset Description Hsg Dia Each
12-288 • Square corner, 1" x 2 1/4", Standard $27.80
2 3/8" or
12-289 • Round corner, 1"x 2 1/4" 27.80
2 3/4" 1"
12-291 • Square corner, 1 1/8" x 2 1/4" 27.80
12-633 • 5" Square corner, 1 1/8" x 2 1/4" 58.90
39-030* • - Rabbeted latch and strike kit, 605 and 626 only - 36.90
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/4" rabbeted door and frame preparations.
16-480
Deadlatches
Part Specify Price
Number Finish Backset Description Hsg Dia Each
16-480 • Square corner, 1" x 2 1/4", Standard $23.80
2 3/8" or
16-204 • Round corner, 1" x 2 1/4" 1” 23.80
2 3/4"
16-228 • Square corner, 1 1/8" x 2 1/4" 23.80
16-132 • 5" Square corner, 1" x 2 1/4" 30.80
39-030* • - Rabbeted latch and strike kit, 605 and 626 only - 36.90
* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/4" rabbeted door and frame preparations.
Deadbolt/Deadlatch Combinations
Combo Specify Price
Number Finish Backset Deadbolt Deadlatch Each
16-481 • 12-288 16-480 $51.60
2 3/8"
16-482 • or 2 3/4" 12-289 16-204 51.60
16-483 • 12-291 16-228 51.60
16-484 • 5" 12-633 16-132* 89.70
Note: 1) Failure to use the above referenced deadlatches and deadbolts with the lockset will invalidate UL Listings and the ANSI
Grade 2 certification.
Deadbolt Strikes
Part Specify Lip Price
Number Finish Description Length Each
10-094 • Square corner, box, 1 1/8" x 2 3/4", standard $10.90
—
10-064 • Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only 10.60
10-092 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.70
10-095 • Square corner, full lip, no box, 1 5/8" x 2 1/4"
10-112 Metal dust box with screws - 11.60
Deadlatch Strikes
Part Specify Lip Price
Number Finish Description Length Each
10-001 • Square corner, T-strike, box, 1 1/8" x 2 3/4", standard $6.60
10-026 • Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.40
10-027 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 6.40
10-058 • Circular, adjustable, 1 3/4" diameter, 605 and 626 only 1 7/32" 9.20
G506-815
Adapters
Part Price
Number Description Each
G506-815 1" Long bolt or latch housing sleeve to adapt 7/8" diameter housing to 1" bore $4.90
Miscellaneous Parts
Part Price
Number Description Each
08-033 Interconnect assembly (For locks purchased BEFORE February 2008) $69.30
08-000 Interconnect assembly (For locks purchased AFTER February 2008) 69.30
S605-064 Rotational stop 3.30
Screws
Price
Each
Part Specify (Order in
Number Finish Description Type Size multiples of 100)
B502-998 Mounting, upper cylinder PFH Recess 10-32 x 2 1/4" $0.74
C603-897 • Latch or standard strike PFH Combo 8-32 x 3/4" 0.70
S605-289 Mounting, lower chassis PFH 8-32 x 1 1/4" 0.96
S605-297 • Escutcheon (2 req.) POH 6-32 x 3/8" 1.10
Screw Packs
Part Price
Number Description Contents Each
S306-105 Mounting screws and tailpiece (2) S605-289
(For locks purchased BEFORE February 2008) (2) B502-998 $6.40
Standard Features*
Certification BHMA certified to ANSI A156.5, 2001, Grade 1 Operational
Key Patents Primus XP keys are protected against unauthorized duplication by U.S. utility patents 7.159.424
Everest and Everest Primus XP keys are protected by U.S. utility patents 5,715,717 and
5,809,816 and by U.S. design patents 428,324 and 426,452.
Standard Solid brass 6 pin cylinders with C123 keyway furnished keyed different (KD) with two 6 pin
Cylinders nickel silver keys (except F-Series Knobs & Levers). Mortise cylinder standard lengths are 1 1/8"
for conventional cylinders, 1 1/2" for full size interchangeable cores and 1 3/8" for small format
interchangeable cores.
SFIC Everest B combinated cores includes 2 change keys.
IC Full size conventional cores are furnished 1-bitted. Primus cores are furnished 0-bitted. Small format
cores are available either uncombinated or combinated. Control keys must be ordered separately.
Primus Primus XP cylinders are furnished MK, KA, KD, or Less Key Blank (LKB). See Terms & Conditions:
Primus Sales Policy for additional details.
Note: 1) For all master key cylinders and cores, key blanks can be substituted for cut keys at no additional charge.
* Cylinders are furnished with standard features unless otherwise specified
Price Book 71 CYL-1
Effective April 5, 2010
CYLINDERS • Schlage Cylinder & Keyway Terminology
SFIC Available
Check Pin
• • • •
Classic Keyway
• • • • •
• • • • • • •
• • • • • • •
Everest Keyway
• • • • • •
• • • • • • •
Keyways
Everest Classic
Cylinders and keys which incorporate all new keyways with the Opposing Schlage pin tumbler keyways which existed before
patented undercut groove on the right side of the key section. C Terms Everest keyways. Obverse is the name of the open family
Family is the name of the open family of keyways. B Family (for of keyways (C, E, etc.) and there are three other families of
SFIC) and D Family keyways are restricted. restricted keyways: Reverse, Numbered and Quad.
Cylinder Mechanisms
Primus XP Cylinders Conventional Cylinders
Schlages high security sidebar cylinder mechanism. Patented Opposing Normal, standard cylinders.
key control, geographical exclusivity, and pick resistance are Terms
standard. UL437 drill resistance is optional. Primus keys operate
conventional cylinders.
Key Control
Restricted Keyways Open Keyways
Special non-stock keyways set aside for limited use and a higher Opposing Standard keyways available without any ordering formalities.
degree of key control. A letter of authorization from the end user is Terms C Family (Everest Conventional) and Obverse (Classic
requiredto process orders for keys, blanks and cylinders. Conventional) keyways are open. All others are restricted.
Cylinder Category
Small Format Interchangeable Core (SFIC) Full Size
A core completely interchangeable with Best, Falcon, etc. No Opposing Pertaining to cylinders (including interchangeable cores),
Primus version exists. Pins, springs, keys and keyways are based Terms keys and keyways based on the industry standard plug
on a plug diameter smaller than the standard 1/2". diameter of about 1/2".
Primus Cylinders-Sub-Assembled
Part Description Price
Number Each
20-200 Primus classic Key in Lever sub-assembled multiple tailpiece. $60.00
(A & H series Orbit A301-338, AL Series A700-031, D-Series C603-524, D levers
C604-243, ND Series N523-022). *
20-201 Primus classic Mortise Cylinder (1 1/4" or 1 1 /8") sub-assembled. 61.00
Multiple cams-Schlage (L583-153) , AR (B502-944) , Standard (B502-948) *
20-202 Primus classic Rim Cylinder sub-assembled. * 65.00
20-203 Primus Classic Primus classic FSIC sub-assembled . * 60.00
20-204 or Everest (Specify Primus Everest Key in Lever sub-assembled . multiple tailpiece. (A & H series 60.00
keyway) Orbit A301-338, AL Series A700-031, D-Series C603-524, D levers C604-243,
ND Series N523-022). *
20-205 Primus Everest Mortise Cylinder (1 1/4" or 1 1 /8") sub-assembled. Multiple 61.00
cams-Schlage (L583-153) , AR (B502-944) , Standard (B502-948). *
20-206 Primus Everest Rim Cylinder sub-assembled. * 65.00
20-207 Primus Everest FSIC sub-assembled. * 60.00
20-208 Primus classic UL437 Key in Lever sub-assembled . multiple tailpiece. (A & H series 77.00
Orbit A301-338, AL Series A700-031, D-Series C603-524, D levers C604-243,
ND Series N523-022). *
20-209 Primus classic UL437 Mortise Cylinder (1 1/4" or 1 1 /8") sub-assembled. Multiple 78.00
cams-Schlage (L583-153) , AR (B502-944) , Standard (B502-948).*
20-210 Primus Classic Primus classic UL 437 Rim Cylinder sub-assembled. * 81.00
20-211 or Everest UL437 Primus Everest UL 437 Key in Lever sub-assembled . multiple tailpiece (A & H series 77.00
(Specify Keyway) Orbit A301-338, AL Series A700-031, D-Series C603-524, D levers C604-243,
ND Series N523-022) *
20-212 Primus Everest UL 437 Mortise Cylinder (1 1/4" or 1 1 /8") sub-assemble. Multiple 78.00
cams-Schlage (L583-153) , AR (B502-944) , Standard (B502-948).*
20-213 Primus Everest UL 437 Rim Cylinder sub-assembled. * 81.00
* Please order separately: Keys, plug pins, Primus finger pins and finger pins springs, side bar and side bar springs.
A
GEO
Knobs PLY A A73 D A, H
thick
C, D TUL ORB ORB D A, H ORB
Horizontal door Classic
Conventional
Tailpiece
Non-Hotel
Functions Hotel Function
All Others
Levers D AL ND D, ND AL Classic
Vertical Conventional
Tailpiece Non-Hotel
Functions Hotel Function
All Others
Door Drawer
AD Lock Series
Part Lever Price
Number Description Keyway Style Each
C603-524 1. All AD Cylindrical Locks - CY Classic All $0.94
2. AD Exit -993R, 993S, 993M ATH, 8AT
C603-243 1. All AD Cylindrical Locks Everest & All 0.94
2. AD Exit - 993R, 993S, 993M Primus ATH, 8AT
23538077 1. All AD Mortise locks - MS, MD Classic All 1.10
2. AD Exit - 993R, 993S, 993M Excep ATH, 8AT
23538085 1. All AD Mortise locks - MS, MD Everest & All 1.10
2. AD Exit - 993R, 993S, 993M Primus Excep ATH, 8AT
B500 Series Cylinders - Single Cylinder Deadbolts Notes: 1) Finishes: 606 and 626 only.
2) Specify keyway to distinguish
Part Door Price between Everest and Classic.
Number Description Thickness Each Example: C or CP (Classic) vs.
22-003 Conventional 1 3/8" - 1 3/4" $49.00 C123 (Everest).
22-004 Conventional 1 3/4" - 2 1/4" 49.00 3) Specify LKB if 0-bitted Primus
20-188 Primus 1 3/8" – 1 7/8" 87.00 cylinders are required less key
20-188-XP Primus XP 1 3/8" – 1 7/8" 87.00 blanks. Deduct $9. 40 per
20-189 Primus 1 7/8" – 2 1/4" 87.00 cylinder.
4) For Everest D Family restricted
20-189-XP Primus XP 1 7/8" – 2 1/4" 87.00 keyways in conventional
20-190 Primus UL 1 3/8" – 1 7/8" 108.00 cylinders, add $9. 30.
20-190-XP Primus XP UL 1 3/8" – 1 7/8" 108.00 See Terms & Conditions for
20-191 Primus UL 1 7/8" – 2 1/4" 108.00 more information.
20-191-XP Primus XP UL 1 7/8" – 2 1/4" 108.00
* Part numbers for double sided cylinders represent one cylinder only
Miscellaneous Parts
Part Price
Number Description Each
36-086* Collar (trim ring) $6.10
B600-071 Washer 0.50
B520-541 Security insert for collar 6.70
B302-043* Housing, outside cylinder, conventional 20.80
B520-648 Housing, inside cylinder, conventional 20.80
B600-092* Inside snap-on faceplate only, for all non-IC double cylinder deadlocks 1.60
* Specify finish: 605, 606, 609, 612, 613, 619, 625, 626, and 643e
Cylinders S200-Series
(For Locks after after Feb 26, 2008) Single Cylinder
Description Part Number Price Each
6-Pin Conventional 22-081 $50.00
Primus® 24-769 88.00
Primus XP 24-769-XP 88.00
Primus UL437 24-569 109.00
Primus XP UL437 24-569-XP 109.00
Notes: 1) Finishes: 606 and 626.
2) Specify keyway to distinguish between Everest® and Classic. Example: C or CP (Classic) vs. C123 (Everest).
3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $9. 40 per cylinder.
4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $9.30. This does not apply to
Primus families. See Terms & Conditions for more information.
Universal Universal
Housing Housing
(steel) (steel)
5-Pin Cylinder Retaining Screw Location 6-Pin Cylinder Retaining Screw Location
Housings With and Without Cylinders (S200 ordered before Feb, 2008)
Price
Series Housing Description Outside Inside Each
5-Pin C, CE, E, F 22-017 22-018 $67.40
B250, B400, E/B (Primus 6-Pin Conventional 22-019 22-020 67.40
only), H (except H160), Primus 20-730 20-731 108.00
S200 Universal (steel) Primus XP 20-730-XP 20-731-XP 108.00
Primus UL437 20-530 20-531 126.00
Primus UL437 XP 20-530-XP 20-531-XP 126.00
Housing only B202-824 B202-825 19.80
Cylinders & Housings, S200-Series (For Locks after after Feb 26, 2008)
Description Part Number Price Each
6-Pin Conventional 22-082 $67.40
Primus® 24-770 108.00
Primus XP 24-770-XP 108.00
Primus UL437 24-570 126.00
Primus XP UL437 24-570-XP 126.00
Housing Only B202-824 19.80
Notes: 5) Finishes: 605, 606, 609, 612, 613, 625 and 626 for housings. Cylinders available 606 and 626 only.
6) Specify keyway to distinguish between Everest and Classic. Example: C or CP (Classic) vs. C123 (Everest).
7) Certain functions of H and S200-Series locksets require a key-in-knob/lever cylinder as well.
8) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $9. 40 per cylinder.
9) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $9.30. This does not apply to
Primus families. See Terms & Conditions for more information.
Cylinders S200-Series
(For Locks after after Feb 26, 2008)
Description Part Number Price Each 10-32 Bolts,
Angled Driver
Notes:1) Finishes: 605, 606, 609, 612, 613, 625 and 626 for housings; 606 and 626 for cores and cylinders only.
2) Specify keyway to distinguish between Everest® and Classic. Example: C or CP (Classic) vs. C123 (Everest).
3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $9. 40 per cylinder.
4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $9.30. This does not apply to
Primus families. See Terms & Condi ti ons for more information.
5) Control keys are not furnished with IC cylinders and must be ordered separately.
6) For construction cores, see Keys & Keyi ng: Constructi on Core Program.
7) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders.
For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended.
For cores,
see CYL-41
Collars (Trim Rings and Security Inserts), B100, B250, B400, E/B,
F100, H, MD and S200-Series
Part Number Specify Finish Description Price Each
02-037 • MD160 Series decorative cylinder rose, specify design $7.60
36-066 • Trim ring, 1/8" 5.80
36-067 • Trim ring, 7/16" 8.00
36-068 Security insert, 1/8" 3.60
36-069 Security insert, 7/16" 6.90
36-070 Security insert pack, 36-068 1/8" and 36-069 7/16" 10.60
36-071 • Trim ring and security insert pack, 36-066 and 36-068 1/8" 9.10
36-072 • Trim ring and security insert pack, 36-067 and 36-069 7/16" 14.80
B520-541* Security insert, 1" for interchangeable core 11.00
36-085 • Trim ring and security insert pack, B520-541 and 36-086 1" 17.10
36-086 • Trim ring, 1" 6.10
* B520-541 was 36-084
Crank Retainer
Crank Retainer
Cylinders
Full Size IC
1/4-28 Bolts,
Angled Driver
Small Format IC
1/4-28 Bolts
Classic
Conventional
All Others
Miscellaneous Parts
Part Price
Number Description Each
36-086* Collar (trim ring) $6.10
B220-032 Tailpiece, BC162, Double Cylinder (1.031") for door thickness 1 3/4" 1.60
B202-269 Tailpiece, BC162, Double Cylinder (0.810") for door thickness 1 3/8" 1.60
B202-557 Tailpiece, BC160, Single Cylinder (1.850") 1.60
B502-949 Driver, Everest and Primus 0.96
B520-298 Cylinder retaining screw 0.50
B520-375 Driver, Classic conventional 1.60
B520-541 Security insert for collar 6.70
B600-092* Inside snap-on faceplate only, for all non-IC double cylinder deadlocks 1.60
Full Size IC
1/4-28 Bolts,
Straight Driver
Small Format IC
1/4-28 Bolts
BC100-Series IC Housings
Price
Cylinder Type Housing Number Each
Full Size Outside B220-203* $35.00
Interchangeable Core Inside B220-201**
Small Format Outside B610-282* 39.60
Interchangeable Core Inside B610-281**
* Specify finish: 605, 609, 612, 613, 625, 626.
** Inside housing does not include snap-on faceplate.
Notes: 1) SFIC housings do not include tailpieces.
2) For cores see Interchangeable Cores.
3) For construction cores, see Keys & Keying: Construction Core Program.
4) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders.
For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores
are recommended.
Mortise Cylinders
Complete Price
Cam Description Cylinder Mechanism Cylinder Each
Schlage L-Series (except L9060 outside)
L583-254 L583-153 Conventional 30-021 $49.00
Classic Everest® Cylinder Only: Primus Controlled Access 20-793 87.00
Conventional & Primus® L&N Primus XP Controlled Access 20-793-XP 87.00
Escutcheons
X X
Primus UL437 20-593 108.00
Y Y Primus XP UL437 20-593-XP 108.00
Hotel Function (conventional) 30-022* 79.00
Conventional 30-001 57.00
Dim. Dim. Cylinder With Primus Controlled Access 20-787 93.00
X = .252 X = .252 Compression Primus XP Controlled Access 20-787-XP 93.00
Y = .638 Y = .638 Ring & Spring: Primus UL437 20-587 116.00
Rose Trim Primus XP UL437 20-587-XP 116.00
Primus Lockout 20-717 122.00
Primus XP Lockout 20-717-XP 122.00
Primus UL437 Lockout 20-517 142.00
Primus XP UL437 Lockout 20-517-XP 142.00
Hotel Function (conventional) 30-002* 84.00
Schlage L9060 Outside and Other Straight Cam Applications
Cylinder Only: Conventional 26-021 $50.00
L&N Primus Controlled Access 20-701 87.00
B502-191 B502-948 Escutcheons Primus XP Controlled Access 20-701-XP 87.00
Classic Everest
Conventional & Primus Primus UL437 20-501 108.00
Primus XP UL437 20-501-XP 108.00
X
Y
X Conventional 20-001 57.00
Y
Cylinder With Primus Controlled Access 20-700 93.00
Compression Primus XP Controlled Access 20-700-XP 93.00
Ring & Spring:
Rose Trim Primus UL437 20-500 116.00
Dim. Dim. Primus XP UL437 20-500-XP 116.00
X = .338 X = .338
Y = .71
Primus Lockout 20-715 122.00
Y = .71 Primus XP Lockout 20-715-XP 122.00
Also for Schlage K-Series (discontinued), Falcon® non- Primus UL437 Lockout 20-515 142.00
deadbolt functions, Adams Rite® 2331 deadlocks,
Baldwin® mortise locks, Corbin Russwin® ML2242 inside Primus XP UL437 Lockout 20-515-XP 142.00
and ML2255.
Von Duprin® exit devices use 1 1/4" cylinder (dim =114). Cylinder With
To order dogging cylinders for Von Duprin® exit devices, Comp. Ring &
specify complete cylinder and Conventional 20-002 67.00
XQ11-947** for Classic conventional cylinders or
1/8" Blocking Ring: >Û>>LiÊÊ££Én»ÊÞ®
XQ11-949** for Everest and Primus cylinders. Adams Rite 2331
Available at no additional charge.
* Specify hand for hotel function cylinders. Not available in Primus. Furnished 0-bitted; emergency keys must be ordered separately.
** Subject to Specials discounting and extended factory lead time.
Dim. Dim.
X = .323 X = .323
Y = .627
Primus UL437 20-508 108.00
Y = .627
Notes:1) Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" add $30.50. Everest hotel function cylinders are
available 1 1/8", 1 1/4" and 1 3/8" only. See S pecial Cylinders for 2" - 5" long cylinders.
2) 1 1/8" (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim and
door thickness. See page CYL-34 for required dimension.
3) Housing finishes: 605, 606, 612, 613, 619, 625 and 626.
4) Plug finishes: 606 and 626 only.
5) To order less Schlage logo specify cylinder “with K510-612 faceplate”.
6) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $9. 40 per cylinder.
7) Lockout keys are not furnished with cylinders and must be ordered separately.
8) Lockout cylinders are not available master keyed.
9) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $9.30. This does not apply to
Primus families. See Terms & Conditions for more information.
10) For cams and other parts, see page CYL-31.
11) Cylinder and Blocking Ring combinations are based on 1-3/4” door thickness.
* Specify hand for hotel function cylinders. Not available in Primus. Emergency keys must be ordered separately.
Notes: 1) Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" add $30.50. Extended lengths are available.
See S pecial Cylinders. Everest hotel function cylinders are available 1 1/8", 1 1/4" and 1 3/8" only.
2) 1 1/8" (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim and
door thickness. See page CYL-34 for required dimension.
3) Finishes: 606 and 626.
4) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $9. 40 per cylinder.
5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $9.30. This does not apply to
Primus families.. See Terms & Conditions for more information.
L583-198
Corbin Russwin non-IC (was XL11-545)
XL11-895
Corbin Russwin
Cams
Part Price
Number Description Each
B502-191 L9060 Straight Classic Conventional $2.20
B502-292 Adams Rite MS Classic Conventional 2.20
B502-380 Adams Rite 4070 Classic Conventional 7.80
B502-944 Adams Rite MS Everest® & Primus® 2.20
B502-945 Adams Rite 4070 Everest & Primus 7.80
B502-948 L9060 Straight Everest & Primus 2.20
L583-153 L-Series Everest & Primus 2.20
L583-197 L-Series for Sargent and Yale non-IC cylinders 7.80
L583-198 L-Series for Corbin Russwin non-IC cylinders 7.80
L583-254 L-Series Classic Conventional 2.20
XQ11-935* Inverted straight Everest and Primus (dogging) 2.20
XL11-895 L-Series for Corbin Russwin 7.80
* Subject to Specials discounting and extended factory lead time.
Cam Screws
Price
Each
(Order in
Part multiples
Number Description of 100)
B502-468 Classic conventional up to 1 3/8" $0.14
B502-942 Everest & Primus up to 1 3/8" 0.30
B502-943 Everest & Primus over 1 3/8" 0.40
B590-295 Classic conventional over 1 3/8" 0.28
Dummy Cylinder
Part Price
Number Description Length Each
38-070 Dummy cylinder only, less ring and cam 1 1/8", 1 1/4", 1 3/8", 1 1/2" $41.00
* To order with construction core, see U$0 ;% "79% U$0 .7:V% ,8//% H .G$% 4>7;#38-#.>7% 4>3$% L3>:3"2 for additional details.
Notes: 1) Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626.
2) Core finishes: 606 and 626 only. For core only, see Interchangeable Cores.
3) Control keys are not furnished with cylinders and must be ordered separately.
4) Primus cylinders are Controlled Access. Specify LKB if 0-bitted Primus cylinders are required less key blanks.
Deduct $9. 40 per cylinder.
5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $9.30. This does not apply to
Primus families. See Terms & Conditions for more information.
6) 2 1/4" through 5" cylinders are available. See S pecial Cylinders for more information.
7) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders.
For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores
are recommended.
8) Cylinder and Blocking Ring combinations are based on 1-3/4” door thickness.
Notes: 1) Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626.
2) Core finishes: 606 and 626 only. For core only, see Interchangeable Cores.
3) Control keys are not furnished with cylinders and must be ordered separately.
4) Key symbol must be specified. Everest B Family keyways are restricted.
See Terms & Conditions for more information.
5) All keys for construction cores must be ordered separately.
6) Keyed construction cores are assessed a non-refundable handling charge (50-231) per core.
See Keys and Keying: S mall Format Construction Core Program for details.
7) Specify GRN for green or BRN for brown if a specific construction combination is required.
8) All SFIC cylinders with Adams Rite MS or 4070 cams are furnished with set screw pack B220-050.
9) Cylinder and Blocking Ring combinations are based on 1-3/4” door thickness.
Note: 1) Blocking rings and/or compression rings may be required and must be ordered separately.
Rim Cylinders
Price
Type Cylinder Mechanism Tailpiece Complete Each
Horizontal 20-022
Conventional $51.00
Vertical 20-021
Standard Horizontal 20-710 97.00
(non-IC) Primus®
Vertical 20-709
Horizontal 20-710-XP
Primus XP 97.00
Vertical 20-709-XP
Horizontal 20-510
Primus UL437 113.00
Vertical 20-509
Horizontal 20-510-XP
Primus XP UL437 113.00
Vertical 20-509-XP
Lockout Primus 20-716 124.00
Primus XP 20-716-XP 124.00
Horizontal
Primus UL437 20-516 144.00
Primus XPUL437 20-516-XP 144.00
Notes: 1) Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626.
2) Plug finishes: 606 and 626 only.
3) All items include collar, mounting screws and backplate.
4) Tailpiece orientation may be changed in the field. For Von Duprin, Monarch and most other applications,
tailpiece should be horizontal.
5) Specify keyway to distinguish between Everest and Classic. Example: C or CP (Classic) vs. C123 (Everest).
6) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $9. 40 per cylinder.
7) The following keys are not furnished with cylinders and must be ordered separately:
• control keys
• operating keys for construction cores
• lockout keys
8) Lockout cylinders are not available master keyed.
9) To order less logo, specify:
“with K510-612 faceplate” for standard cylinder.
“with 23-031 core” for full size interchangeable core cylinder.
10) Standard (non-IC) cylinders are available for application that is thicker than 3" ( combined door & device trim thickness)
over 3" thick and available with special mounting screw locations for Sargent exit devices. See S pecial Cylinders.
11) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $9.30. This does not apply to
Primus families. See Terms & Conditions for more information.
12) Conventional full size IC cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders.
For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended.
20-057
Rim Cylinders
Price
Type Cylinder Mechanism Tailpiece Complete Each
Full Size Conventional Core 20-057* $92.00
Interchangeable Core
Convertible
Primus Core 20-757 131.00
Primus XP Core 20-757-XP 131.00
Housing only-less core 20-079 42.00
Small Format Everest® Restricted Combinated Core 80-329** 97.00
Interchangeable Core
Keyed Construction Core 80-159*** 69.00
Horizontal
Disposable Construct. Core 80-116 42.00
Housing only-less core 80-129 42.00
* To order with construction core, see U$0 ;% "79% U$0 .7:V% ,8//% H .G$% 4>7;#38-#.>7% 4>3$% L3>:3"2.
** Key symbol must be specified. Everest B Family keyways are restricted. See I$32;% =% 4>79.#.>7; for more information.
*** Specify GRN for green or BRN for brown construction cores. A non-refundable handling charge (50-231) is assessed per core.
See U$0 ;% "79% U$0 .7:V% H 2"//% ,>32"#% 4>7;#38-#.>7% 4>3$% L3>:3"2 for details.
Notes: See Previous Page
Rim Cylinder Parts
Part Price
Number Description Each
36-066 Collar, IC cylinders $5.80
B202-328 Screws and backplate pack 5.00
B220-001* Tailpiece & driver, full size IC 8.40
B502-200 Backplate 3.40
B502-209 Mounting screw 1.00
B502-310-604 Driver, standard (non-IC) cylinder .80
B502-899 Tailpiece, standard (non-IC) cylinder 1.90
B520-153 Ring, cylinder, NL 5.70
B520-361* Tailpiece retainer, full size IC (order in mult. of 100) 0.14
B600-107 Throw member for SFIC models 1.80
* Specify hand for hotel function cores. Emergency keys must be ordered separately.
Notes: 1) Control keys must be ordered separately.
2) Finishes: 606 and 626.
3) Specify keyway to distinguish between Everest® and Classic. Example: C or CP (Classic) vs. C123 (Everest).
4) Full size cores, both conventional and Primus, can be integrated into any Schlage key system with compatible Everest or
Classic keyways.
5) Primus cores are Controlled Access. Specify LKB if 0-bitted Primus cores are required less key blanks.
Deduct $9. 40 per core.
6) For construction cores, see Keys & Keying: Full S ize Construction Core Program.
7) Split key construction not available for interchangeable cores.
8) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $9.30. This does not apply to
Primus families. See Terms & Conditions for more information.
9) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders.
For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended.
80-037
80-033
Miscellaneous
Part Price
Number Description Each
A501-783 Blocking disc, Yale levers $3.40
B520-408 Sleeve, Yale cylinders 3.90
B520-407 Washer, Sargent 4.10
C607-062 Spacer, Corbin Russwin CL3300 2.30
and Y
Russwin 1503)
Dim.
X = .155
Y = .775
Corbin Russwin® B520-233 (was XB08-899) B520-253 (was XB11-352) B520-309 (was XB11-629)
ML2200 Series X
(Old Corbin 7000-9000 Y
and
Russwin 4000-5000)
All functions except
ML2255 and Dim.
ML2242 inside X = .232
(see straight cam) Y = .729
Corbin Russwin A65 B520-223 (was XB03-142) B520-360 (was XB11-817) B520-367 (was XB11-887)
ML2200 master ring X
deadbolt functions
manufactured before Y
6/10/93
and
old Russwin cast iron
residential locks. Dim.
For all Best 40HSeries X = .235
& 30H Deadbolt function Y = .729
Yale® B520-256 (was XB11-430, B520-296 (was XB11-461, B520-329 (was XB11-631,
2160 replaces XB10-659) replaces XB11-484) replaces XB11-630)
Arrow ® X
#004 Y
Sargent ®
13-0660
All functions
except 16 inside Dim.
and 50 outside X = .186
Y = .718
20-030 20-001
Special Cylinders
Extended Factory Lead Time Not subject to standard discount terms
“X” Price
Number Description Each
Extra Long Mortise Cylinders
XB03-418 Mortise cylinder (20-001, 30-001 or 30-004), 1 7/8" – 5" long Classic or Everest $270.00
Full size IC mortise cylinder (26-091 or 30-008), 2 1/4" – 5" long, Classic or Everest 384.00
XB11-475* Primus® full size IC mortise cylinder (20-763 or 20-798), 2 1/4" – 5" long 424.00
Full size IC mortise cylinder housing less core (20-059 or 30-007) 2 1/4" – 5" long 331.00
XB11-638 Primus mortise cylinder (20-700, 20-787 or 20-789), 1 7/8" – 5" long 310.00
Mortise Cylinder with Switch
$286.00
XB09-195 Mortise cylinder (20-001) with “on” and “off” switch for key controlled electrical circuits,
conventional
XB09-795 Same as XB09-195, but double position, classic conventional only (no master keying available) 384.00
XQ11-804 Primus mortise cylinder (20-700) with “on” and “off” switch for key controlled electrical
circuits 322.00
Rim Cylinders
$326.00
XB04-618 Conventional cylinder (20-021 or 20-022) for doors over 3" thick
Insure device/ trim thickness is included in addition to door thickness
Primus cylinder (20-710) for doors over 3" thick 326.00
Insure device/ trim thickness is included in addition to door thickness
XB11-789 Conventional cylinder (20-022) with mounting holes for Sargent® exit device 67.20
XB11-790 Primus cylinder (20-710) with mounting holes for Sargent® exit device 122.00
Full size IC, conventional core (20-057) for doors over 3" thick 368.00
Insure device/ trim thickness is included in addition to door thickness
XB11-958 Full size IC, Primus core (20-757) for doors over 3" thick 410.00
Insure device/ trim thickness is included in addition to door thickness
Full size IC, housing less core (20-079) for doors over 3" thick 316.00
Insure device/ trim thickness is included in addition to door thickness
* Available in 1/4" increments. Order collars or blocking rings separately to fill any gaps.
Notes: 1) Specify complete cylinder as required, then “X” number. Example: 20-001 per XB09-195.
2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $9.30. This does not apply to
Primus families. See Terms & Conditions for more information.
3) Primus cylinders are Controlled Access. Specify LKB if 0-bitted Primus cylinders are required less key blanks.
Deduct $9. 40 per cylinder.
4) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
Springs Ordering
Part Price Shaded prices are
Number Description Each
specified in unit
C503-113 Pin tumbler spring (including Primus)
Order in quantities (per
C503-115 Cap retainer pin spring (including Primus) piece) and must be
multiples of 100
C603-951 Primus finger pin spring and Everest check pin spring ordered in multiples.
$0.12
C603-952 Primus sidebar spring Example:
Order 100 34-300,
Ward Rings Receive 1 bag of 100
Part Price pins. Price = $8.00
Number Description Each
C503-833 Ward ring $0.78
K510-045 Stop ring for hotel function Everest mortise cylinders 2.60
K510-434 Stop ring for hotel function Classic mortise cylinders 2.60
SFIC Caps
Part Price
Number Description Each
Order in
34-952 21C Cap multiples of 500
$0.08
SFIC Springs
Part Price
Number Description Each
Order in
C504-114 20S Tumbler spring multiples of 500
$0.08
Order in
C504-116 Everest check pin spring multiples of 100
0.12
Notes: 1) Specify finish: 606 (430 for F-Series Knobs & Levers) and 626 (429 for F-Series Knobs & Levers).
2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $9.30. This does not apply to
Primus families. See Terms & Conditions for more information.
3) For Titan/Kwikset and Weiser reorder components see page Cyl-54.
Plugs, Mortise
Part Price
Number Description Length Each
Everest® Primus® Controlled Access,
33-134
Everest Primus XP Controlled Access 1 1/8", 1 1/4", 1 3/8" $44.60
Classic Primus Controlled Access
33-159
Classic Primus XPControlled Access
33-228 Everest hotel function
1 1/8", 1 1/4", 1 3/8"
33-229 Everest conventional 28.00
33-406* 6-Pin Classic conventional 1 1/8", 1 1/4", 1 3/8"
1 1/2", 1 5/8", 1 3/4" 38.80
B590-297** 3/8" Plug extension, Classic conventional — 20.80
B590-447*** 3/8" Plug extension, Everest and Primus — 22.70
Note: 1) See Tools & Kits: Competitive Keying Kits for complete kits.
Ordering
Shaded prices are specified
in unit quantities
(per piece) and must be
ordered in multiples.
Example:
Order 100 34-067,
Receive 1 bag of 100 pins.
Price = $18.00
Table of Contents
Stock Products Stock Products Tab
Keys Ordered Separately Keys-2
Classic Conventional Key Blanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-2
Classic Conventional Cut Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-3
Everest® Full Size Conventional Key Blanks and Cut Keys . . . . . . . . . . . . . . . . . . Keys-4
Everest® Small Format IC Key Blanks and Cut Keys . . . . . . . . . . . . . . . . . . . . . . . . Keys-5
Key Blanks, Best ® Key Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-5
Classic Primus ® Key Blanks, Cut Keys and I.D. Cards . . . . . . . . . . . . . . . . . . . . . Keys-6
Classic Primus ® XP Key Blanks, Cut Keys and I.D. Cards . . . . . . . . . . . . . . . . . . Keys-7
Everest® Primus® Key Blanks, Cut Keys and I.D. Cards . . . . . . . . . . . . . . . . . . . . . .Keys-8
Everest® Primus® XP Key Blanks, Cut Keys and I.D. Cards . . . . . . . . . . . . . . . . . . .Keys-9
Split Key Construction Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-10
Special Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-10
Presentation Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-11
Key Stamping Keys-12
Cylinder Stamping Keys-13
Construction Core Program Keys-14
Full Size Construction Core Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-14
Small Format Construction Core Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-15
Keying Charges Keys-16
Contract Master Keying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-16
Contract Construction Keying (CK)/Split Key Construction Keying . . . . . . . . . . . . Keys-16
Other Keying (Non-Master Keyed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-16
Residential Master Keying (RMK) and/or Residential Construction Keying (RCK) . . Keys-17
Bitting Lists (Transcripts) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-18
KSC Generic Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-18
Keys Ordered with Locks or Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-19
Pack Change Keys Independently (PKI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-19
QuicKey Program Keys-21
QuicKey Product Availability and Order Requirements- Full Size Key Blanks . . . Keys-21
QuicKey Product Availability and Order Requirements-SFIC Keys and Cores . . . Keys-22
SITEMASTER 200 ® Keys-23
Key System Management Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-23
How To Order Forms & Examples
Quick Key order form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-25
Letter of Authorization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-26
Primus order check list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-28
Master keyed order form and example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-29-30
Master key system system summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-33
Primus face sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-41
Primus Signature Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-43
CONTROL
R492518
Registry # CONTROL
86776 AA
C Combination C Master Key Symbol
Section Section
Standard markings unless otherwise specified. See page Keys-10 for additional key stamping information.
001426
Pat. 5,715,717 DO NOT DUPLICATE DO NOT DUPLICATE DO NOT DUPLICATE
Pat. 5,715,717 Pat. 5,715,717 Pat. 5,715,717
Section
001426
Pat. 5,715,717 DO NOT DUPLICATE DO NOT DUPLICATE DO NOT DUPLICATE
Pat. 5,715,717 Pat. 5,715,717 Pat. 5,715,717
Section
Standard markings unless otherwise specified. See Keys-10 for additional key stamping information.
35-310
Key Blanks
DUPLICATION
PROHIBITED
Standard markings unless otherwise specified. See page Keys-12 for additional key stamping information.
Notes: 1) When ordering Level 1 Plus key blanks, Locksmith I.D. number must be furnished.
2) For keys ordered with locks or cylinders see page Keys-18.
3) LP Section keys are only available in stainless steel. Schlage recommends having LP section keys cut at the factory
since stainless steel will damage the cutters of most field key machines.
40-061 1 Order in
Standard markings unless otherwise specified. See page Keys-12 for additional key stamping information.
Notes: 1) When ordering Level 1 Plus XP key blanks, Locksmith I.D. number must be furnished.
2) For keys ordered with locks or cylinders see page Keys-18.
3) LP Section keys are only available in stainless steel. Schlage recommends having LP section keys cut at the factory
since stainless steel will damage the cutters of most field key machines.
PRIMUS
PRIMU S PRIMUS
PRIMU S 001426
DO NOT DUPLICATE DO NOT DUPLICATE DO NOT DUPLICATE
Pat. 5,809,816 Pat. 5,809,816 Pat. 5,809,816
Section
PRIMUS
PRIMUS PRIMUS
PRIMUS 001426
DO NOT DUPLICATE DO NOT DUPLICATE DO NOT DUPLICATE
Pat. 5,809,816 Pat. 5,809,816 Pat. 5,809,816
Section
35-057
Special Keys
Part Price
Number Description Each
35-250 Emergency key, A40, AL40, or D40 function $3.00
35-251 Spanner key, A85, AL85, D85, ND85, or H185 function
L583-233-458 Emergency turn, L9040 function 12.80
M504-271 Emergency key, F40 or S40 function 1.30
61-509* Emergency release key standard size, for occupancy deadbolts 6.40
61-510* Emergency release key large, for occupancy deadbolts 12.50
Presentation Keys
Part Price
Number Description Each
Key Blanks
35-223 5-Pin Velvet case with 2 standard bow Classic gold plated blanks, embossed both sides
35-224 6-Pin
35-227 5-Pin $105.00
Velvet case with 1 large bow Classic gold plated blank, embossed both sides
35-228 6-Pin
35-229 6-Pin Velvet case with 1 Everest® gold plated blank
Cut Keys
48-223 5-Pin Velvet case with 2 standard bow Classic gold plated keys, embossed both sides
48-224 6-Pin
48-227 5-Pin $114.00
Velvet case with 1 large bow Classic gold plated key, embossed both sides
48-228 6-Pin
48-229 6-Pin Velvet case with 1 Everest gold plated key
Master Keys
49-223 5-Pin Velvet case with 2 standard bow Classic gold plated keys, embossed both sides
49-224 6-Pin
49-227 5-Pin $125.00
Velvet case with 1 large bow Classic gold plated key, embossed both sides
49-228 6-Pin
49-229 6-Pin Velvet case with 1 Everest gold plated key
Stamping Area
DO NOT DUPLICATE
AA1 765352
C
Key Stamping
Part Price Each
Description Key Type Specify Number Key
Visual Key Control (VKC) Classic conventional Stamp key symbol on key 50-217 $1.70
with standard key symbols Everest® & all Primus® (furnished as standard)* — N/C
All conventional Non-standard code 50-233 4.70
Non-standard code***
All Primus (6 characters maximum) 50-003 per side
Classic conventional Stamp key “Do Not Duplicate” XQ06-878
Everest C Family conventional Use 35-002 blanks — N/C
DO NOT DUPLICATE
Everest B Family**, (furnished as standard)
Everest D Family, all Primus
Contact Customer Service. New 50-219 3.30
Custom die stamp*** Classic, Everest, all Primus dies subject to one time charge, per side
see Custom Product
Request Process (page iv).
Classic & Everest conventional, 50-220 3.30
Delete key section
Delete key section from bow Everest Primus
Classic Primus (furnished as standard) — N/C
Classic conventional Delete key combination 50-221 3.30
Bitting not stamped
Everest & all Primus (furnished as standard) — N/C
Classic conventional (furnished as standard) — N/C
Stamp bitting**** Everest C Family conventional Stamp key bitting 50-233 4.70
* Specify “delete key symbol on key” if VKC is not required. Available at no charge.
** Everest B Family keys are stamped “RESTRICTED”.
*** Only available on unembossed keys.
**** Not available on Primus or Everest B and D Family keys or on keys with key symbols stamped (VKC).
Note: 1) Key stamping locations may vary from those pictured above depending on key type and the amount of key
stamping required.
AA1
AA1
Cylinder Stamping
Part Price
Description Key Type Specify Number Each
Classic conventional, 50-216 $4.20
Visual Key Control (VKC) or Stamp key symbol.
Concealed Key Control (CKC) Everest C & D conventional Specify face (VKC) or side (CKC).
(standard key symbols only) Everest® B Family (SFIC) — N/C
All Primus® Stamp key symbol. Available side only. 50-002 4.50
All Conventional Non-standard code (6 characters 50-216
maximum). Specify face or side.
Non-standard code 4.50
All Primus Non-standard code (6 characters 50-002
maximum). Available side only.
CONTROL
Full Size Construction Core Program
Part Price
C
Number Description Specify Each
23-030-ICX Construction core New jobs: Specify “ICX” $50.00
Section
48-101-ICX Cut key for construction phase (order separately) Existing jobs: Specify “ICA”, “ICB” or 5.30
48-056-ICX Cut control key (order separately) “ICC”. 9.20
50-231 Non-refundable handling charge (per core) 6.90
Notes: 1) To order mortise and rim cylinders with full size construction cores for a new job, suffix ICX to non-Primus cylinder
number. Example: 30-008 ICX. For existing construction core combinations, specify ICA, ICB, or ICC.
2) Construction cores for a given project are keyed alike to one of a limited number of combinations nationwide. Other
Schlage projects in the same area using the same or different contractors may use the same key. Where a higher degree
of security is desired, order a set of conventional or Primus® cores in 606 or 626 finish keyed alike to a random
combination. Specify “KA Group 1”. Such cores would not be assessed the handling fee and are not returnable to
Schlage.
Example:
Example for construction core charges and credits. distributor XYZ ordered 150 construction cores with 20 keys and one
control key. The following charges apply to this order:
1. 23-030-ICX construction cores (150 units).
2. 48-101-ICX cut keys (20 units).
3. 48-056-ICX cut control key (1 unit).
4. 50-231 Non-refundable handling charge (150 units-one per core ordered).
Upon return of the cores to the factory the distributor will be credited for the following:
1. 23-030-ICX construction cores (150 units).
There is no credit for the keys or handling fee.
M204-152
Example:
Example for construction core charges and credits. distributor XYZ ordered 150 construction cores with 20 keys and
one control key. The following charges apply to this order:
1. 80-035 construction cores (150 units).
2. 48-310 cut keys (20 units).
3. 48-311 cut control key (1 unit).
4. 50-231 Non-refundable handling charge (150 units-one per core ordered).
Upon return of the cores to the factory the distributor will be credited for the following:
1. 23-030-ICX construction cores (150 units).
There is no credit for the keys or handling fee.
Note: 1) Any cylinder operated by keys other than its own change key or Single keyed (SKD) groups within a master key
system are subject to master keying charges. The Schlage Master Key Department determines and makes the
final decision in the selection and use of key sections. 100% Expansion is allowed for new master key systems
unless otherwise specified.
Note: 7) Schlage locks and cylinders are furnished C123 keyway keyed different (KD) unless otherwise specified.
Notes: 1) Lost ball construction device is triggered by the highest level permanent key unless otherwise specified.
2) Change keys packed in envelopes and packed in lock box. PKI packing available at no additional charge.
3) Residential Construction keying charges are in addition to Residential Master keying charges.
35-135-C MS-J175
35-135-C MS-J175
Builder Lo
go
HOMEO
WNER
DOCUM
ENTS
Notes: 1) Large bow custom logo keys are available as key blanks only. Cut keys are not available
2) Customized presentation keys require camera-ready art of the logo.
* Can be used for SM download (keying and bitting details) if ordered as such. Please specify Sitemaster download file if
applicable in the details column. Information needed is Structure or original order number, end user name, city and state
(used to verify the structure number). Also required is an email address for the end user, include their full name to address the
email and an LOA.
QuicKey Product Availability and Order Requirements - Full Size Key Blanks
Available Typical
Products Key Family Order Requirements Lead Time
Classic - Key Blanks
Obverse None 10 Days*
35-100 5-Pin
Reverse End-user letter of authorization
35-101 6-Pin 10 Days
Numbered (Paracentric) indicating quantity, product and
35-056 Control
Quad key section
Everest Conventional Key Blanks
Everest C Family single sections None Use Stock Products
35-002 DND Everest C Family multi-sections None
35-009 Standard Existing facility code, job name and job
35-003 Control Everest D Family location. End-user letter of authorization if 5 Days
shipping address is different than
originally authorized.
Classic Primus Key Blanks • Level 1: Existing Primus number and
sequence number or section.
• Level 1+: Existing Primus number,
sequence number or section and
35-157 Standard Primus Obverse locksmith ID number.
35-157-XP Primus XP Obverse • Level 2S or 2M: Existing Primus number 5 Days
35-158 Control Primus Quad and section.
35-158-XP Primus XP Quad • Levels 3 and 4: Existing Primus number,
section and original signed Primus
facesheet (faxed copies not allowed).
* Applies to all sections except the following, which are offered through Stock Products:
35-100 = C and E; 35-101 = C, CE, E, EF, and F; 35-056 = C, CE, E, EF, H, and J.
Notes: 1) Keyblanks (35-xxx) must be ordered in multiples of 50, except control keys. Cut keys can be ordered in any quantity.
2) Key stamping is not available, except DO NOT DUPLICATE per XQ06-878 for Classic conventional sections.
3) Longest lead-time prevails on orders with mixed lead-time product.
4) Lead-time refers to the time between when the order is booked and acknowledged by Schlage and the shipment of an
order. Lead-times are subject to change.
QuicKey Product Availability and Order Requirements - SFIC Keys and Cores
Available Typical
Products Key Family Order Requirements Lead Time
Best Key Section Key Blanks
35-310 Best None 10 Days
Everest SFIC Key Blanks
35-401 Embossed Existing facility code, job name and job
Everest B Family location. End-user letter of authorization if 5 Days
35-021 Unembossed
shipping address is different than originally
authorized.
Everest SFIC Cut Keys
48-401 Embossed
48-021 Unembossed
49-401 Embossed master Everest B Family Existing facility code, job name and job
location. End-user letter of authorization if 5 Days
49-021 Unembossed master shipping address is different than originally
49-356 Embossed control authorized.
49-022 Unembossed control
Everest SFIC Uncombinated Cores
Existing facility code, job name and job
80-036* Everest B Family location. End-user letter of authorization if 5 Days
shipping address is different than originally
authorized.
Everest SFIC Combinated Cores
Existing facility code, job name and job
80-037* Everest B Family location. End-user letter of authorization if 5 Days
shipping address is different than originally
authorized.
* Specify 606, 626 and 613 (simulated) finish. Uncombinated cores are furnished less keys, pins and springs.
Notes: 1) For complimentary demonstration software please contact your local SSC sales rep. or free download at www. schlage. com.
2) SiteMaster manuals have been replaced by an extensive help menu on the CD.
3) SM comes without any information loaded. The download file needs to be ordered (see P/N50-123 ordering instructions)
and Schlage is not responsible to load personnel information, etc.
* Requires end user contact name, address, phone, and email (not yahoo or hotmail)
** Require single user registration number.
Forms
Description Part Number Price Each
Key Record Form (order in multiples of 50) SM01-210 $0.32
NAME:
PHONE:
FAX:
SC-5236
Sample Letter of Authorization
For All Restricted Key Products KEYS & KEYING
Jones Elementary School is to be keyed using a new Everest D Restricted Key System. For security
reasons, we would like to have all keys for this facility shipped to a location other than the job site. Master
keyed products, however, can be shipped directly to the site. This letter authorizes Schlage to ship our
restricted products to the following addresses:
These two addresses above serve as our only authorized shipment addresses for all orders placed for our
facility. We understand that this letter will be kept on file and referenced for our future orders and that a
new letter is only required to add, remove, or change authorized shipping locations.
Sincerely,
(79%*;$3
'$@3$;$7#"#.J$
H.:7"#83$%%&
End User Representative '()*+'(!
Facilities Manager
K$##$3%2"0%<$%2"./$9%>3%C"D$9%#>%H-F/":$
H-F/":$%'$;#3.-#$9%539$3%L3>-$;;.7:
MNOO%P"7->-A%(D@3$;;Q"0
4>/>3"9>%H@3.7:;R%45%NSOTT
IMPORTANT NOTES
For Level One Plus and 7, All Cylinder Orders Will Be Supplied LESS KEYBLANKS Unless
Otherwise Specified
For All Other Levels, All Cylinder Orders Will Be Supplied WITH KEYBLANKS Unless
Otherwise Specified
✓ The Distributors Primus number MUST be ✓ The Distributors Primus number MUST be
provided provided
✓ The Sequence number MUST be provided ✓ The Locksmiths Facility code MUST be
provided
FOR LEVEL ONE PLUS ✓ The Keyway MUST be provided
✓ The Dealers Primus number MUST be ✓ The Distributors Primus number MUST be
provided provided
✓ The Sequence number and/or Section MUST ✓ The Keyway MUST be provided
be Provided
✓ Orders Originating a System MUST include ✓ Orders Originating a System MUST include
both an Original Facesheet and a Signature both an Original Facesheet and a Signature
Card Card
✓ An Original Facesheet MUST accompany all ✓ An Original Primus Facesheet MUST
succeeding orders accompany all succeeding orders
✓ The Primus number MUST be indicated on ✓ The Primus number MUST be indicated on
the Facesheet the Facesheet
✓ ALL fields on the Facesheet MUST be ✓ ALL fields on the Facesheet MUST be
completed where applicable completed where applicable
Notes:
1 Ingersoll-Rand Company
2 3 1
1 Ingersoll-Rand
Master Keyed Order Add'l Page
MS-I150 2 1
Page __________ of __________
Account # P.O. #
K E Y SYST E M S U M M A RY
PART 1 Job Name
Job Information City State Zip
HELPFUL HINTS Country
!" /233"2)":30)+9"$&7"$09*.7"&7(.7"C7&1.992)<K
PART 2 SYSTEM TYPE NEW EXISTING
System Definition MASTER KEYING
Classic Master Keyed Original Order # R#
HELPFUL HINTS Classic Primus® Master Keyed Original Order # R#
!" #$"%&'"(&")&*"+)&,"*-."/01232*%"4&(.5" Facesheet attached (All level 3 & 4 orders)
6728'9")'8:.75";.<29*7%")'8:.7"=;>?5" Signature Card attached (New level 3 & 4 orders) Primus # Level
&7"*-."&72<2)03"$01*&7%"&7(.7")'8:.7"$&7" Everest® B Family Master Keyed – Small Format IC Original Order # R#
0)".@29*2)<"9%9*.85"1&)*01*"4'9*&8.7" Letter of authorized ship-to address attached
A.7B21."C72&7"*&"C3012)<"*-."&7(.7D (New systems & change of address on existing systems) Facility Code
Everest C Family Master Keyed – Open Original Order # R#
@&,7 ABCDDBCEFBACGE
Everest D Family Master Keyed – Restricted Original Order # R#
H#I(ABCDDBEJKBDGGL Letter of authorized ship-to address attached
!" E.,"9%9*.89"$&7"FGC2)"A8033"/&780*"#4" (New systems & change of address on existing systems) Facility Code
HB.7.9*" I"/0823%"7.J'27."C72&7" Everest Primus Master Keyed Original Order # R#
0CC7&B03":%"#;"A.1'72*%"0)("A0$.*% Facesheet attached (All level 9 orders)
Signature Card attached (New level 9 orders) Primus # Level
4&)9'3*0)*K
Residential Master Keyed – RMK Original Order # R#
!" L)3%"1&8C0*2:3."9%9*.8"*%C.9"80%":."
&7(.7.("&)"*-."908."C'71-09."&7(.7K CONSTRUCTION KEYING
A.."4&8C0*0:232*%"4-07*K Full Size Construction Cores IC (A, B or C)
(For Full Size IC locks and cylinders)
!" 4309921"7.$.79"*&"L:B.79.5"E'8:.7.("
Small Format Construction Cores (B or G) RN
=60701.)*721?5"M'0(5"0)(";.B.79."+.%" (For Small Format IC locks and cylinders)
9.1*2&)"$08232.9K
Construction Keyed – CK Original Order # R#
!" 4309921"6728'9"7.$.79"*&"6728'9"L:B.79." (Split Key Method, not available for Primus and IC)
0)("6728'9"M'0("+.%"9.1*2&)"$08232.9K Residential Construction Keyed – RCK Original Order # R#
(Lost Ball Method, 5 pin C only)
COMPATIBILITY CHART
KEY SECTION FAMILY
CLASSIC CLASSIC EVEREST EVEREST PRIMUS
SYSTEM TYPES 5-PIN 6-PIN PRIMUS B FAMILY C FAMILY D FAMILY C FAMILY D FAMILY
Master Keying
Classic
Primus
Everest B Family
Everest C Family
Everest D Family
Everest Primus
Residential, 5-Pin C Keyway Only
Construction Keying
Full Size Construction Cores
Small Format Construction Cores
Split Key
Residential, 5-Pin C Keyway Only
STAMPING INSTRUCTIONS
Stamp keys: With industry standard key symbol Do Not Duplicate (DND) With key stamping die XQ
Non standard code
Stamp cylinder: With industry standard key symbol Non standard code
Cylinder stamping location: Plug face (Not available for Primus) – VKC Concealed – CKC
HELPFUL HINTS CK (Split Key) Everest C Family and D Family Construction Key 48-008
!" 4&)9*7'1*2&)"+.%9"07."C01+.("2)"3&1+" Classic Construction Key 48-104
107*&)"1&)*02)2)<"C01+2)<"932CK Everest and Classic Extractor Tool 35-057
!" 4&)9*7'1*2&)"+.%9"07.")&*"$'7)29-.("
')3.99"9C.12$2.(K Full Size Construction Cores Construction Key 48-101
!" AC32*"+.%"1&)9*7'1*2&)"+.%2)<"29")&*"0B0230:3. Control Key 48-056
$&7"4309921"6728'9"&7"HB.7.9*"6728'9"
Small Format Construction Cores Construction Key 48-310
(Best® Style) Control Key 48-311
Control Keys
Control Key (except Hotel) N/A 49-056 49-158** N/A 49-003 49-003 49-005
Control Key, unembossed (except Hotel) N/A 49-076 49-052 49-356 N/A N/A 49-020
Control Key, Hotel N/A 49-056 N/A N/A 49-016 49-016 N/A
Emergency Keys
Emergency Key, Standard Bow N/A 49-102 N/A N/A 49-007 49-007 N/A
Emergency Key, Large Bow N/A 49-142 N/A N/A N/A N/A N/A
* For LP section, specify 49-171. **For LP section, specify 49-172.
Note: Specify key type and check box Do Not Duplicate.
Classic or Classic Primus or
Everest Everest Primus
Part # Part # Level Qty. Per Master Key Symbol(s) = Total Quantity
Emergency . . . EM EM
Others . . . . . . .
PART 8 Cross-keyed Cylinder is operated by these change keys Cross-keyed Cylinder is operated by these change keys
Operating Instructions
X ________ ____________________________________ X ________ ____________________________________
HELPFUL HINTS X ________ ____________________________________ X ________ ____________________________________
!" 47&99"+.%2)<"7.('1.9"*-."
9.1'72*%"0)(".@C0)92&)"&$" X ________ ____________________________________ X ________ ____________________________________
+.%"9%9*.89K
X ________ ____________________________________ X ________ ____________________________________
!" N)3.99"&*-.7,29."9C.12$2.(5"
033"-2.7071-2103"809*.7"+.%9" X ________ ____________________________________ X ________ ____________________________________
,233"&C.70*."17&99G+.%.("
1%32)(.79K X ________ ____________________________________ X ________ ____________________________________
THIS ORIGINAL FORM MUST BE MAILED TO SCHLAGE COMMERCIAL DIVISION WITH YOUR ORDER
– FAXED COPIES NOT ACCEPTABLE –
PRIMUS SECURITY LEVEL:
3U (no exclusivity) 4Z (time exclusivity) 9U (no exclusivity) 9Z (time exclusivity)
3G (2-digit zip exclusivity) 4N (nationwide exclusivity) 9G (2-digit zip exclusivity) 9N (nationwide exclusivity)
PROJECT INFORMATION
1.
2.
3.
4.
5.
— OVER —
DEALER OF LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE)
Contact 1 Signature
Effective From: to
Date Date
SPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signature
authorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibility
for validating the owner’s signature as identified on the Primus Signature Card before ordering
the material.
SPECIAL INSTRUCTIONS: Please indicate any restrictions to authorized individuals listed on this form when purchasing
additional Primus product or duplicating keys.
Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send with letter
requesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distributors
and Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax of
this card will not be accepted.
© 2002 Ingersoll-Rand
MS-E130 Rev. 8/05
Introduction Portable Security
Table of Contents
PL Series Cross Reference PS-3
Key-In-Knob with Cylinder PS-4
Keyed Different . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-4
Chain Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-4
Key-In-Knob Less Cylinder PS-5
SFIC Less Cylinder PS-6
Full Size IC Core PS-7
Less Cylinder - Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-7
Custom Engraving Brass Padlocks and Chrome Plated Brass Padlocks PS-8
Parts and Accessories PS-9
Flex Security PS-12
Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-12
Security Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-13
Security Cables and Locking Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-13
Hasps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-14
*Cy linders must be ordered as a separate line item for all products ex cept conv entional k ey in k nob KD stock ed.
* Cylinders must be ordered as a separate line item for all products except conventional key in knob KD stocked.
PL Series - Discontinued
Body Size Shackle Dimension Shackle Dimension (metric)
Cylinder
Part # Width Height Depth A B C A B C Type
PL1001J 1 1/8" 29mm
PL1002J 1 3/4" 2 1/8" 3/4" 5/16" 2" 3/4" 8mm 51mm 19mm KNK
PL1003J 3" 76mm
PL2001J 1 1/8" 29mm
PL2002J 2" 2 1/8" 3/4" 3/8" 2" 3/4" 9.5mm 51mm 19mm KNK
PL2003J 3" 76mm
PL3001J 1 1/8" 29mm
2 1/4" 2 3/8" 7/8" 7/16" 5/16" 11mm 24mm KNK
PL3002J 2" 51mm
PL4001J 1 1/8" 29mm
PL4002J 2" 2 1/4" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm IC
PL4003J 3" 76mm
KS Series - Replacement
Body Size Shackle Dimension Shackle Dimension (metric)
Cylinder
Part # Width Height Depth A B C A B C Type
KS23D2200 1 1/2" 38mm
1 25/32" 2 3/16" 7/8" 5/16" 3/4" 8mm
KS23F2200 2" 51mm 19mm KNK
KS43D2200 1 1/2" 38mm
1 15/16" 2 3/16" 7/8" 3/8" 3/4" 9.5mm
KS43F2200 2" 51mm 19mm KNK
KS43D3200 1 1/2" 38mm
1 15/16" 2 3/16" 7/8" 3/8" 3/4" 9.5mm 19mm IC
KS43F3200 2" 51mm
Shackle Dimensions
NOTES: 3) For cylinder and keying options, refer to Cylinders and Keys & Keying sections.
NOTE: 5) For master keyed or keyed alike product, order chain, padlocks and cylinders separately.
Order chains #999478 or #999461 with padlock KS72F2300.
Prices are for chains only.
Chains and Padlocks must be ordered separately.
Shackle Dimensions
KS23D KS43F
NOTE: 1) Key in Knob less cylinder padlocks ship with key stop, cylinder housing, and cylinder housing screw.
2) For cylinder and keying options, refer to Cylinders and Keys & Keying sections.
3) For customer engraving, see page PS-8.
NOTES: 1) Product is shipped without cylinder. For cylinder and keying options, refer to Cylinders and Keys and Keying sections.
2) For Custom Engraving, see page PS-8.
NOTEs: 3) Key in Knob cables less cylinder ship with key stop, cylinder housing and cylinder housing screw.
4) For cylinder and keying options, refer to Cylinders and Keys & Keying sections.
KS43D KS43F
NOTES: 1) For cylinder and keying options, refer to Cylinders and Keys and Keying sections.
2) For Custom Engraving, see page PS-8.
Brass Padlocks - Listed on page Chrome Plated Brass Padlocks - Listed on page
KS23D2300 KS11D1200
KS23F2300 PS-4 KS11F1200
KS43D2300 KS21D1200 PS-6
KS43F2300 KS21F1200
KS23D2200 KS41D1200
KS23F2200 PS-5 KS41F1200
KS43D2200
KS43F2200
KS43D3200
PS-7
KS43F3200
List
UPC Part # Description Box Carton Price
720018- Quantity Quantity Each
SERVICE REPAIR KIT - PADLOCK & CABLES - CONVENTIONAL KEY-IN-KNOB & SFIC
997818 KZ390AL Service Repair Kit — Includes 10 of each part below except KZ35AC1, KZ35AC2, 1 6 $375.00
KZ36EB0 - Qty 20; KZ37000 - Qty 1 and also includes pliers
PADLOCK PARTS - CONVENTIONAL KEY-IN-KNOB
998204 KZ32CB1 Key Retaining Locking Cam, 10, 20, 40, 80, 90 Series 30 240 $1.90
998211 KZ32CB2 Key Retaining Locking Cam, 70 Series 30 240 1.90
997788 KZ32DA0 Driver 30 240 1.90
PADLOCK PARTS - SFIC
998259 KZ31CB1 Key Retaining Locking Cam, 10, 20, 40, 80, 90 Series 30 240 $1.10
998266 KZ31CB2 Key Retaining Locking Cam, 70 Series 30 240 1.10
998303 KZ31DA0 Throw Member 30 240 2.20
ACCESSORIES
997900* KZ200AL 9" Nickel Plated Steel Retaining Chain 6 36 $6.40
Shackle Dimensions
List
UPC Part # Description Box Carton Price
720018- Quantity Quantity Each
PADLOCK PARTS - CONVENTIONAL KEY-IN-KNOB & SFIC
997801 KZ35AA1 Shackle Spring, 10 Series 30 240 $0.40
997795 KZ35AA2 Shackle Spring, 20, 80 Series 30 240 0.40
996972 KZ35AA3 Shackle Spring, 40, 90 Series 30 240 0.40
996965 KZ35AA4 Shackle Spring, 70 Series 30 240 0.40
996958 KZ35AB1 Shackle Mounting Screw, 10, 20, 40 Series 30 240 1.10
997771 KZ35AB2 Shackle Mounting Screw, 70, 80, 90 Series 30 240 1.10
997894 KZ35AC1 Locking Ball Bearing, 10, 20, 40, 80, 90 Series 30 240 0.86
998136 KZ35AC2 Locking Ball Bearing, 70 Series 30 240 1.20
998419 KZ35EC1 Bumper, 10, 20 Series 30 240 0.60
998426 KZ35EC2 Bumper, 40 Series 30 240 0.60
998402 KZ35EC3 Bumper, 80 Series 30 240 0.60
998396 KZ35EC4 Bumper, 90 Series 30 240 0.60
PADLOCK PARTS - CONVENTIONAL KEY-IN-KNOB
998167 KZ32BB0 Cylinder Housing Screw 30 240 $0.86
998174 KZ32CA1 Locking Cam, 10, 20, 40, 80, 90 Series 30 240 1.90
998198 KZ32CA2 Locking Cam, 70 Series 30 240 1.90
998228 KZ32CC0 Key Stop 30 240 0.40
PADLOCK & CABLE PARTS - CONVENTIONAL KEY-IN-KNOB
998143 KZ38BA1* Cylinder Housing, 20, 40, 70, 80, 90, KC Series 20 160 $6.80
998150 KZ38BA2* Cylinder Housing, 10, KC Series 20 160 6.80
PADLOCK PARTS - SFIC
998235 KZ31CA1 Locking Cam, 10, 20, 40, 80, 90 Series 30 240 $1.90
998242 KZ31CA2 Locking Cam, 70 Series 30 240 1.90
998273 KZ31CC1 Steel Retainer Plate, 10, 20, 40, 80, 90 Series 30 240 1.10
998280 KZ31CC2 Steel Retainer Plate, 70 Series 30 240 1.10
998297 KZ31CD0 Steel Retainer Plate Screw 30 240 1.40
998433 KZ37000 Installation Tool 6 36 2.90
CABLE PARTS
998358 KZ33CA0 Throw Member, SFIC 30 240 $4.30
998327 KZ33DB0 Washer, Key-In-Knob /SFIC 30 240 0.40
998334 KZ33DC0 Driver Mounting Screw, Key-In-Knob 30 240 1.10
998440 KZ34CA0 Cylinder Cap, Key-In-Knob 30 240 1.60
998365 KZ34DA0 Driver, Key-In-Knob 30 240 2.00
998341 KZ34DC0 Throw Member Mounting Screw, SFIC 30 240 1.10
997665 KZ34ED0 Cylinder Cap Pin, Key-In-Knob 30 240 0.62
998372 KZ36EA0 Dust Cover, Key-In-Knob /SFIC 30 240 2.10
998389 KZ36EB0 Dust Cover Screw, Key-In-Knob /SFIC 30 240 0.62
*Cable series can use either Cylinder Housing part KZ38BA1 or KZ38BA2.
Shackle Dimensions
Security Chains
Part Link Dimension Chain Case Price Link Dimensions
UPC Number A Length Qty. Each
Cinch Ring Security Chains
720018999478 999478 1/2" 5' 1 $72.40
720018999461 999461 1/2" 3' 3" 1 38.40
Hasps
Locking Case
UPC Part Number Body Dimension Eye Dia. Qty. Price Each
Security Hasps
720018855101 855101 8 1/2" x 4 1/2" 5/8" 3 $30.20
720018855118 855118 7 3/4" x 1 3/4" 1/2" 6 9.50
720018855125 855125 5" x 2" 1/2" 6 9.20
720018855132 855132 4 1/4" x 1 5/8" 9/16" 6 10.60
720018855149 855149 7 1/4" x 1 5/8" 9/16" 6 9.50
720018994848 994848 4 1/2" x 1 5/8 1/2" 6 4.90
Shackle Dimensions
Standard Features*
Certification ANSI A156.11, 1996, Series 4000, Grade 2
Bar CL100-Series 1" throw; CL200-Series 3/4" throw
Strike 1/2" Bar strike and 1/4" bar strike
Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**
Door Range Spacers and strikes will accommodate doors 7/8", 1", and 1 1/8" thick
Keys Two nickel silver cut keys per lock, 6-pin, C123 section**
CL100PB CL200PB
CL-Series
Finishes
605
Function Description 626
Keyed
CL100PB Door cabinet lock, 6-pin cylinder, 1" bolt throw
$110.00
CL200PB Drawer cabinet lock, 6-pin cylinder, 3/4" bolt throw
Notes: 1) Keying options: see Keys & Keying.
2) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
Notes: 6) Locks are furnished 0-bitted, with two 6-pin keys entered as a separate line item, unless otherwise specified.
7) Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $9. 40 per cylinder.
8) Keying options: see Keys & Keying.
CL-Series: Everest Restricted Small Size Removable Core Mail Box Lock
Finishes
Function Description 626
Keyed
CL728G Everest Patented SFIC Mail Box Lock $81.00
* Please refer to Everest small format interchangeable core key control policies, under the Terms & Condition Section.
CL10-355 CL10-354
Strikes
Add to
Description Specify Lock Price
Bar strike, 3/4" x 1 31/32" x 1/2", standard CL10-355
N/C
Bar strike, 3/4" x 1 31/32" x 1/4", standard CL10-354
Note: 1) For slotted strike (CL10-352), see CL Parts: S tri kes.
Special Locks
Extended Factory Lead Time Not subject to standard discount terms
Price
Description Specify Each
Classic Cabinet Lock for doors 1/8" to 3/4" thick XB03-232, door hand and door thickness $281.00
Everest Cabinet Lock for doors 1/8" to 3/4" thick XB03-232EV, door hand and door thickness 281.00
Primus Cabinet Lock for doors 1/8" to 3/4" thick XB03-232P, door hand and door thickness 281.00
Everest Primus Cabinet lock for doors 1/8" to 3/4" thick XB03-232EP, door hand and door thickness 281.00
Classic Cabinet Lock for doors over 7/8" to 2" thick XB06-530, door hand and door thickness 338.00
Everest Cabinet Lock for doors over 7/8" to 2" thick XB06-530EV, door hand and door thickness 338.00
Primus Cabinet Lock for doors over 7/8" to 2" thick XB06-530P, door hand and door thickness 338.00
Everest Primus Cabinet Lock for doors over 7/8" to 2" thick XB06-530P, door hand and door thickness 338.00
Notes: 2) Locking provided by swinging cam. Attached to door with hex nut.
3) Keying options: see Keys & Keyi ng
4) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request
Process on page iv.
5) For Everest® D Family restricted keyways (Quad, Numbered, Reversed), add $9. 30 per cylinder or core.
See Terms & Conditions for more information.
6) If you are unable to find your required hardware solution in this price book, please refer to our
Custom Product Request Process on page iv.
36-031
Trim Collars
Part Specify Price
Number Finish Description Each
36-031 • 1 3/16" diameter x 5/8" depth $7.70
Strikes
Part Price
Number Description Each
CL10-352 Slotted strike
CL10-354 Bar strike, 3/4" x 1 31/32" x 1/4", standard $2.10
CL10-355 Bar strike, 3/4" x 1 31/32" x 1/2", standard
Adapters
Part Price
Number Description Each
CL10-350 Spacer $2.10
Screws
Part Price
Number Description Each
CL10-301 Retaining screw $0.26
CL-720G Cam
Part Price
Number Description Each
CL720-3-1 CL720 short cam inverted hand $2.10
CL720-3-2 CL720 long inbent cam, vertical hand 2.10
CL720-3-3 CL720 long offset cam, inverted hand 2.30
CL720-3-4 CL720 long straight cam, vertical hand 2.30
CL720-3-5 CL720 long shall offset cam, inverted hand 2.30
CL775-SP Strike pack for CL775 (Latch lock) 2.10
CL725-SP Strike pack for CL725 (Deadbolt lock) 2.10
Table of Contents
Stock Products Stock Products Tab
Keying Tools & Kits Tool-2
Full Size Pin Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-2
Full Size Keying Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-3
Small Format Interchangeable Core Pin Kits . . . . . . . . . . Tool-4
Small Format Interchangeable Core Service
Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-4
Competitive Keying Kits . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-5
Competitive Keying Tools . . . . . . . . . . . . . . . . . . . . . . . . Tool-5
Tools Tool-6
Installation Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tool-6
Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-7
Torx® Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-7
Kits Tool-8
Portable Security Repair Kit . . . . . . . . . . . . . . . . . . . . . . Tool-8
Home Secure RCK Accessories . . . . . . . . . . . . . . . . . . . Tool-8
Maintenance Kits (Replacement Parts Assortments) . . . . . Tool-8
Installation JIG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-9
Mortise JIG (wood) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tool-10
How To Order Forms & Examples
BL
UE
PR OFES
PU IONAL
NCH
P
S
R
PRO
Q U AL
#B
-LO ORANGE
K TOO
-L
P201
O
LS CA 9266
YT
IT ESSORIES
& ACC 7
,
K
OOLS
9
8
5
9
8
PR
7
6
2
5
O
1
-L
3
2
0
O
1
0
K
ÁÊ
7
6
4
3
M540-000 M540-056 M540-051
Aluminum follower and
Master Pin Remover
®
BLU
E PU
PR OFES
NCH NAL
P
SI
R
PRO
O
Q U AL
#B
-LO ORANGE
K TOO
-L
P201
O
LS CA 9266
YT
IT ESSORI
& ACC 7
,
OOLS
9
ES
8
9 8 7 6 5 4 3 2 1 0
7
6
5
9
8
4
PR
7
6
3
5
O
1
-L
3
2
0
O
1
0
K
40-171
IC Decode, Dump Tool
40-090 40-094
Titan/Kwikset Keying Kit Weiser Keying Kit
Competitive Keying Kits enable Schlage Residential B and F-Series cylinders to be keyed into a competitors key system.
Note: 1) For replacement pins, springs and plugs, see Cyl i nders: Competi ti ve Keyi ng Ki t Refi l l s.
40-153 40-158
5" Backset Adapter Mortise Pocket Filler (edge)
40-026
1 1/2" Bushing (old style)
40-029 40-030
40-031 40-032
1" Front 1 1/8" Front
Torx® Tools
Part Number Description Price Each
M504-424 Tool T-8 $30.00
M504-425 Tool T-15
M504-426 Tool T-20 28.90 N523-108
M504-427 Tool T-30
M504-428 Tool T-10
KZ390AL
Portable Security Repair Kit
40-031 40-032
1" x 2 1/4" Latch Chisel 1 1/8" x 2 1/4"
Latch Chisel
Installation Kits
Part Price
Number Description Contents Each
40-147 Installation Kit for Locksets & Deadbolts 40-148 40-175 $1,754.00
Kit includes JIG, Case, (2) Multi-spur bits, (4) latch/strike M504-497 40-179
chisels, (2) Bushing Plates, Quick Change bit adapter, 40-176 40-178
40-177 40-029
1” Auger bit & strike locator 40-030 40-031
40-032
M504-497 Case Only — 155.00
40-148 Installation JIG only — 1,330.00
Notes: 1) For F-Series installation, 40-015 and 40-035 (Page Tool-7) is required.
2) For 40-147, doors requiring thrubolt holes and/or 7/8" edge bores, bits sold separately. Reference Tool-7.
40-170
Long Boring Shaft
Installation Kits
Part Price
Number Description Contents Each
40-160 Installation kit for mortise lock 40-160 40-169 $921.00
Kit includes: Jig, Case (3 wood 40-165 40-170
cutter bits and long boring shaft) 40-167
Installation Tools
Part Description Price
Number Each
40-161 5/8" Woodcutter Bit $87.60
40-162 11/16" Woodcutter Bit 87.60
40-163 3/4" Woodcutter Bit 87.60
40-164 13/16" Woodcutter Bit 87.60
40-165 7/8" Woodcutter Bit 95.10
40-166 15/16" Woodcutter Bit 95.10
40-167 1" Woodcutter Bit 95.10
40-168 1-1/16" Woodcutter Bit 95.10
40-169 1-1/4" Woodcutter Bit 119.00
40-170 Long boring shaft for locks up to 6" 181.00
Table of Contents
Stock Products Stock Products Tab
Display Mounts Merch-3
Solid Oak Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-3
Special Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-3
Miscellaneous Merch-4
Finish Selector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-4
Plastic Lock Case Cover . . . . . . . . . . . . . . . . . . . . . . Merch-4
Promotional Items . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-4
How To Order Forms & Examples
ÁÊ
ÁÊ
ÁÊ
Á
Á
Á
ÁÊ
ÁÊ
ÁÊ
Á
Á
ÁÊ
ÁÊ
Dexter by Schlage
44-070 44-133 44-132 44-157
B Cross Bore
Display Mounts
Part Dimensions Price
Number Description A B C Overall Each
44-104 B (except BR260 & B260E) 2 3/8" 1 1/2" 1 1/8" 6" x 9 1/2" $84.60
44-105 A, F/FA, B/BA (single) and BE 2 3/8" 2 1/8" 1" 6" x 9 1/2" 84.60
44-106 A with B/BA, F/FA, FE,and H (double) 2 3/8" 2 1/8" 1" 6" x 14" 102.00
44-107 A, F/FA, B/BA (triple) 2 3/8" 2 1/8" 1" 6" x 14" 108.00
44-108 A, F/FA, B/BA (quadruple) 2 3/8" 2 1/8" 1" 6" x 24 1/2" 136.00
44-109 F/FA, FE300 2 3/8" 2 1/8" 1" 6" x 24 1/2" 112.00
44-110* L9000 2 3/4" — — 8 1/2" x 14" 107.00
44-111 A, B600/700/800, D Knob, S (single) 2 3/4" 2 1/8" 1 1/8" 8 1/2" x 14" 120.00
44-112 D Lever, AL (single), ND Lever 2 3/4" 2 1/8" 1 1/8" 8 1/2" x 14" 141.00
44-113 A, S, D Knob (triple) 2 3/4" 2 1/8" 1 1/8" 8 1/2" x 24 1/2" 168.00
44-115 Clear plastic mount ring — 2 1/8" — 2 1/2" x 1" 33.40
44-119 F300 BOW 2 3/8" 1 1/2" (top) 1" 6" x 24 1/2" 85.70
2 1/8" (bottom)
44-120 F300 CEN 2 3/8" 1 1/2" (top) 1" 6" x 24 1/2" 85.70
2 1/8" (bottom)
44-121 S200, H 2 3/8" 1 1/2" (top) 1" 6" x 14" 110.00
2 1/8" (bottom)
44-161 FE &BE Keypad Lock Mount 2 3/8" 2 1/8" 1" 6 " x 14" 88.40
44-162 FE &BEKeypad Lock & 1 1/2" (top)
Keypad Deadbolt Mount 2 3/8" 2 1/8" (bottom) 1" 6 " x 19 " 109.00
Special Parts
Extended Factory Lead Time Not subject to standard discount terms
Part Price
Number Description Each
XL11-806 Modified 44-110 display mount with see-through window $405.00
Note: 1) If you are unable to find your required hardware solution in this Price Book,
please refer to the Custom Product Request process on page i v.
39-029
S
PRIMU
Promotional Items
Part Price
Number Description Each
40-072-XP Classic Primus XP cutaway cylinder $195.00
40-093-XP Everest Primus XP cutaway cylinder 195.00
40-073 Everest cutaway cylinder 195.00
40-077-XP Everest/Everest Primus XP Sales Kit 433.00
40-146-XP Classic/Classic Primus XP sales kit 135.00
Kick Plate: A protective plate applied on the lower rail of the door to Overhead Concealed Closer: A closer concealed in the head frame
prevent the door from being marred. with an arm connecting with the door at the top rail.
Knob: A projecting handle for operating a lock.
Knob Shank: The projecting stem of a knob into which the spindle is P
fastened. Panic Exit Device: See Exit Device.
Knob Top: That part of the knob that the hand grasps. Paracentric: A term used in connection with cylinder plugs having
Knuckle: The enlarged part of a hinge into which the pin is inserted. projections on the sides of the keyway that extend beyond the vertical
center line of the keyway.
L Paumelle: A style of hinge embodying a single pint of the pivot type,
generally of modern, or streamlined design.
Latch Bolt: A beveled spring bolt, usually operated by a knob, handle or
turn. Pin Tumblers: Small sliding pins in a lock cylinder, working against coil
springs and preventing the cylinder plug from rotating until the pins are
Leaf (of a pair of doors): One of the two doors forming a pair of raised to the proper alignment by bitting of key.
doors.
Pivot: See Door Pivot.
Letterbox Back Plate: A plate, similar to a letterbox plate, attached to
the inside of a door to allow the passage of mail. Plug (of a cylinder): The round part containing the keyway and rotated
by the key to transmit motion to the bolt(s).
Letterbox Plate: A date attached to the door with an opening to permit
insertion of mail. Preassembled Lock: A lock that has all the parts assembled as a unit
at the factory, and when installed in a rectangular notch cut into the door
Lever Handle: A horizontal handle for operating the bolt(s) of a lock. edge, requires little or no disassembly.
Lever Tumbler: Flat tumbler having a pivoted motion actuated by the Prison Lock: A heavy lock designed especially for use on jail cells.
turning of the key and controlling the locking function.
Push Plate: A plate applied to the lock stile to protect the door against
Lip of a Strike: The projecting part on which the latch bolt rides. soiling and wear
Lock Rail (of the door): The horizontal member of a door intended to
receive the lock case.
Q
Lock Set: A lock, complete with trim, such as knobs, escutcheons or
handles. Quadrant (Dutch Door): A device to fasten together the upper and the
lower leaves of a Dutch door.
Lock Stile (of a door): The stile to which the lock is applied as
distinguished from the hinge stile.
Loose Joint Hinge: A hinge having but two knuckles; the pin is R
fastened permanently to one knuckle, the other contains the pinhole, Rabbet: A term used to describe the abutting edges of a pair of doors or
whereby the two parts of the hinge can be disengaged by lifting. These windows so shaped as to provide a tight fit. One half of the edge projects
hinges are handed. beyond the other half, usually 1/2 . Also used to define that portion of a door
Loose Pin Hinge: A hinge having a removable pin to permit the two frame into which the door fits.
parts of the hinge to be separated. Rabbeted Lock (or Latch): A lock in which the face conforms to the
rabbet found on a rabbeted door.
M Rail (of a door): A horizontal member that pins the stiles. May be
exposed as in a paneled door, or concealed as in a flush door
Magnetic Catch: A cupboard catch that uses a magnet to hold the door
closed. Reinforcing Unit: A metal box-shaped reinforcement for use in a metal
door in which a bored lock is to be installed. It provides both vertical and
Master Key: Operates any quantity of cylinders of different individual key horizontal latch support.
changes.
Reverse Bevel: See Bevel.
Masterkeying: An arrangement of cylinders having individual key
changes, which permits them all to be operated by a simple key called a Reversible Lock: A lock which, by reversing the latch bolt, may be used
master key. by any hand. On certain types of locks, other parts must also be changed.
Mono Lock: See Preassembled Lock. Rigid Lock: See Preassembled Lock.
Mop Plate: A narrow plate similar to a kick plate, of sufficient height to Rim: A term indicating articles of hardware designed for application to the
protect against the swish of the mop. surface of doors and windows.
Mortise: A cavity made to receive a lock or other hardware; also the act of Roller Latch: A friction door latch employing a roller latch head under
making such a cavity. spring tension, which engages a strike having a recess formed to receive the
roller.
Mortise Bolt: A door bolt designed to be mortised into a door rather than
applied to its surface. Roller Strike: A strike having a rolling member at the point of latch bolt
contact to minimize friction.
Mortise Lock (or Latch): A lock designed to be installed in a mortise
rather than applied to the door's surface. Rose: A trim plate attached to the door under the knob. It sometimes acts
as a knob bearing.
Mullion: A fixed or movable post dividing an opening vertically.
Rounded Front: A lock or bolt front conforming to the rounded edge of
a double acting door. The standard radius is 4" (101.6 mm).
N
Nightlatch: An auxiliary lock having a spring latch bolt and functioning S
independently of, and providing additional security to, the regular lock of the
door. Sash Balance: A spring device used to counterbalance the weight of a
window sash or other vertical sliding part.
Sash Center: A pivoted support for transom or sash and comprised of
O two parts, one of which contains a pivot, the other a socket for the pivot.
Olive Knuckle Hinge: A paumelle hinge with knuckles forming an oval Sash Chain: A metal chain adapted for use with sliding sash, attached to
shape. the sash and to the counterbalancing sash weight.