Beruflich Dokumente
Kultur Dokumente
million parts of the solution. These are two common ways to think about what the
concentration "1 ppm" means:
a) it is one-millionth of a gram per gram of sample solution.
b) it is one gram of solute per million grams of sample solution.
Notice that the more general word 'part' is used above, but 'gram' is used in (a) and (b)
just above. This is because 'gram' is used almost exclusively when parts per million is
used.
The best way to explain this is by doing some examples:
Problem #1: Sea water contains 3.90 x 106 ppm of dissolved gold. What volume of
this sea water would contain 1.00 g of gold?
Solution:
1) 3.90 x 106 ppm means this:
3.90 x 106 g of Au per 1.00 gram of seawater
2) We use a ratio and proportion:
(3.90 x 106 g of Au 1.00 gram of seawater) = (1.00 g of Au x)
3) Cross multiply and divide yields our answer:
2.56 x 105 g of sea water contains 1.00 g of gold
Problem #2: Pollutants in air and water are frequently measured in parts per million
(ppm) or parts per billion (ppb). One part per million would mean that there is one
gram of the pollutant in every one million grams of air. At ordinary temperature and
pressure, air has a density of 0.00012 gram per cubic centimeter. What volume of air
would contain one gram of sulfur dioxide, a pollutant that causes acid rain, if the
sulfur dioxide concentration is 2 ppm.
Solution:
1) How many grams of air contain one gram of SO 2?
2 ppm means 2 grams SO2 per million grams of air
therefore,
Problem #3: A sample of oil (density = 0.89 g/mL) was found to have dioxin
contamination of 2 ppm. How many mL of the oil would contain 0.01 gram of dioxin?
Solution:
1) Determine grams of oil holding 0.01 g of dioxin. Use a ratio and proportion:
(2 g dioxin over 1,000,000 g solution) = (0.01 g over x)
x = 5000 g
2) Determine the volume of oil:
0.89 g/mL = 5000 g divided by x
x = 5618 mL
Problem #4: Fish need about 5 ppm O2 dissolved in water to survive. Will water with
7 mg O2 per liter sustain fish?
Solution:
We need to convert 7 mg/L into ppm:
(0.007 g / 1000 g) = (x / 1,000,00 g)
x = 7 ppm
The answer is yes.
Notice the conversion of one liter of water (with 7 mg dissolved oxygen) into 1000 g.
I used the density of 1.00 g/mL for the conversion. This is acceptable because
solutions in the ppm range are so dilute that the solute (in this case, the O 2, has no
effect on the solution density.
Look again at the mg/L value. Another way to explain getting from mg/L to ppm is to
multiply both numerator and denominator by 1000:
(0.007 g / 1000 g) x (1000 / 1000) = 7 g / 1,000,000 g = 7 ppm
You may very well face problems where you get the data in mg/L format and are then
asked something about ppm. Remember!
Problem #5: Show why a mass of 0.145 g of KMnO4 in a 500 mL volumetric flask
corresponds to 100 ppm in Mn.
Solution:
1) Using a gravimetric factor, determine grams of Mn in 0.145 g of KMnO 4:
0.145 g times (54.938 g/mol over 158.032 g/mol) = 0.0504076 g
2) Calculate ppm of Mn. Use a ratio and proportion:
(0.050 g over 500 g) = (x over 1,000,000)
x = 100 ppm
Problem #6: Symptoms of lead poisoning become apparent after a person has
accumulated more than 20 mg in the body. Express this amount as parts per million
for an 80 kg person.
Solution:
1) Convert mg and kg to grams:
20 mg = 20 x 10-3 g
80 kg = 80 x 103 g
2) Determine grams Pb per g of bodyweight:
20 x 10-3 g / 80 x 103 g = 0.25 x 10-6 per g of bodyweight
3) Refer to first description of ppm given at beginning of file:
one ppm "is one-millionth of a gram per gram of sample solution."
In this case, the "solution" is the bodyweight.
answer = 0.25 ppm
Problem #7: If you eat a 6 oz. can (180g) of tuna with 0.20 ppm Hg, how much
mercury do you ingest?
Solution:
1) The meaning of 0.20 ppm Hg:
Remember, one ppm "is one-millionth of a gram per gram of sample solution."
Therefore the tuna contains 0.20 x 10-6 g of Hg per gram of tuna.
2) Calculate Hg in 180 g of tuna:
0.20 x 10-6 g of Hg per g of tuna times 180 g of tuna = 3.6 x 10 -5 g of Hg
Problem #8: It is estimated that 3 x 105 tons of sulfur dioxide enters the atmosphere
daily owing to the burning of coal and petroleum products. Assuming an even
distribution of the sulfur dioxide throughout the earth's atmosphere (which is not the
case), calculate in parts per million by weight the concentration of SO 2 added daily to
the atmosphere. The weight of the atmosphere is 4.5 x 10 15 tons.
Solution:
1) Set up a ratio and proportion:
You are adding 3 x 105 parts per 4.5 x 1015 parts.
How many parts per 1 x 106 is this?
2) Solve it:
3 x 105 parts is to 4.5 x 1015 parts as x is to 1 x 106 parts
x = 0.000067 ppm