Beruflich Dokumente
Kultur Dokumente
The objective of this project is to produce a topographic map of the area surveyed using the grid method.
EQUIPMENT:
SURVEY AREA:
SURVEY PROCEDURE:
1. The class will set out the 4m x 4m grid. Thereafter each crew will work on their own.
2. Mark the four corners of the grid at stations (0,0), (20,0), (20,16) and (0,16) with the range pole
3. Mark the other grid points with survey pins.
4. Using profile survey format, take IFS readings on every grid point.
5. Then locate (by their co-ordinates) and take IFS readings on any break points (points
between grid stations where the ground slope abruptly changes). These should be described
as "breakpoints" on the description page.
6. Finally, locate (by co-ordinates) and take IFS readings if appropriate on any detail features in
the grid space (light standard, tree, maintenance hole and catchbasin). These should also be
described and sizes given on the description page. A diagram of the grid should be included.