Beruflich Dokumente
Kultur Dokumente
Features
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 20
Optional Status Monitoring (ROSA / TNCS or other compatible element management system
required)
Fiber entry ports on both ends of housing lid
Fiber management tray and track provides easy access to fiber connections
Primary and redundant Power Supplies with passive load sharing
Spring loaded seizure assemblies allow coax connectors to be installed or removed without removing
amplifier chassis or spring loaded mechanism from the rear of the housing base
Dual/Split AC powering
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 20
External
-20 dB TP
-20 dB
Fwd. TP
RF Switch
EQ
FWD
P1
Pad
Pad
AC
Bypass
Pad
REV
FWD
EQ
AC
Bypass
Pad
REV
Pad
-20 dB
Rev. TP
Power Director
-20 dB
Fwd. TP
RF Switch
-20 dB
Rev. TP
Pad
P4
Power Director
Thermal
Thermal
External
-20 dB TP
External
-20 dB TP
-20 dB
Fwd. TP
P2
-20 dB
Fwd. TP
RF Switch
Node
Signal Director
Jumper
Node
Signal Director
Splitter
RF Switch
AC
Bypass
AC
Bypass
FWD
EQ
-20 dB
Rev. TP
REV
Power Director
Pad
Pad
-20 dB
Rev. TP
REV
Pad
Power Director
Pad
Thermal
Thermal
RS
RS
RS
RS
RS = reverse switch
Crowbar
Crowbar
4x1 Reverse
Configuration Module
w/Aux Reverse RF
Injection
1x4
Forward Configuration
Module
External
-20 dB TP
-20 dB
Fwd. TP
P3
AC
Bypass
-20 dB
Rev. TP
External
-20 dB TP
-20 dB
Fwd. TP
Aux Rev
RF Inj.
Pad
Power Director
P5
FWD
EQ
Pad
Pad
AC
Bypass
Pad
(to RCM)
(to RCM)
5-210 MHz
Reverse Injection
Option
5-210 MHz
Reverse Injection
Option
-20 dB
Rev. TP
P6
Power Director
Optical
Interface Board
Power
Supply #1
TP
XMTR
#4
TP
TP
F1
Laser Diode
TP
#3
XMTR
XMTR
Pad
Laser Diode
Pad
#2
Laser Diode
XMTR
RCVR
Pad
#1
Laser Diode
#1
Pad
#2
RCVR
Pad
Photo Diode
Photo Diode
Pad
#3
Photo Diode
Fiber Tray
RCVR
#4
Pad
RCVR
Pad
Photo Diode
Power
Supply #2
F2
3 Optional Receivers
3 Optional Transmitters
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 20
External
-20 dB TP
-20 dB
Fwd. TP
RF Switch
EQ
FWD
P1
Pad
Pad
AC
Bypass
Pad
REV
FWD
EQ
AC
Bypass
Pad
REV
Pad
-20 dB
Rev. TP
Power Director
-20 dB
Fwd. TP
RF Switch
P4
-20 dB
Rev. TP
Pad
Power Director
Thermal
Thermal
External
-20 dB TP
External
-20 dB TP
-20 dB
Fwd. TP
P2
-20 dB
Fwd. TP
RF Switch
Node
Signal Director
Jumper
AC
Bypass
FWD
EQ
-20 dB
Rev. TP
Pad
Pad
Power Director
Pad
Thermal
Thermal
RS
RS
RS
RS
RS = reverse switch
Crowbar
-20 dB
Fwd. TP
AC
Bypass
Power Director
External
-20 dB TP
-20 dB
Fwd. TP
Aux Rev
RF Inj.
Pad
-20 dB
Rev. TP
Crowbar
4x2 Reverse
Configuration Module
w/Aux Reverse RF
Injection
2x4
Forward Configuration
Module
External
-20 dB TP
P5
-20 dB
Rev. TP
REV
Pad
P3
AC
Bypass
FWD
EQ
Pad
Pad
REV
Power Director
Node
Signal Director
Splitter
RF Switch
AC
Bypass
Pad
(to RCM)
(to RCM)
5-210 MHz
Reverse Injection
Option
5-210 MHz
Reverse Injection
Option
P6
-20 dB
Rev. TP
Power Director
Optical
Interface Board
Power
Supply #1
TP
TP
Laser Diode
Photo Diode
Photo Diode
Photo Diode
Photo Diode
#3
#4
XMTR
#2
Pad
TP
TP
F1
Laser Diode
#1
Pad
XMTR
#1
XMTR
#2
Pad
Laser Diode
#3
Pad
Laser Diode
Pad
RCVR
Pad
RCVR
Fiber Tray
RCVR
#4
Pad
RCVR
Pad
XMTR
Power
Supply #2
F2
3 Optional Receivers
3 Optional Transmitters
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 20
External
-20 dB TP
-20 dB
Fwd. TP
RF Switch
EQ
FWD
P1
Pad
Pad
AC
Bypass
Pad
REV
FWD
EQ
AC
Bypass
Pad
REV
Pad
-20 dB
Rev. TP
Power Director
-20 dB
Fwd. TP
RF Switch
P4
-20 dB
Rev. TP
Pad
Power Director
Thermal
Thermal
External
-20 dB TP
External
-20 dB TP
-20 dB
Fwd. TP
P2
-20 dB
Fwd. TP
RF Switch
Node
Signal Director
Jumper
AC
Bypass
FWD
EQ
-20 dB
Rev. TP
Pad
Pad
AC
Bypass
-20 dB
Rev. TP
REV
Pad
P5
FWD
EQ
Pad
Pad
REV
Power Director
Node
Signal Director
Splitter
RF Switch
Power Director
Pad
Thermal
Thermal
RS
RS
RS
RS
RS = reverse switch
Crowbar
Crowbar
4x4 Reverse
Configuration Module
w/Aux Reverse RF
Injection
4x4
Forward Configuration
Module
External
-20 dB TP
-20 dB
Fwd. TP
External
-20 dB TP
-20 dB
Fwd. TP
Aux Rev
RF Inj.
P3
AC
Bypass
Pad
-20 dB
Rev. TP
AC
Bypass
Pad
(to RCM)
(to RCM)
5-210 MHz
Reverse Injection
Option
5-210 MHz
Reverse Injection
Option
-20 dB
Rev. TP
P6
Power Director
Power Director
Optical
Interface Board
Power
Supply #1
Pad
F1
Laser Diode
TP
TP
TP
TP
Laser Diode
Photo Diode
Photo Diode
Photo Diode
Photo Diode
#4
#3
XMTR
#2
Pad
XMTR
#1
Pad
Laser Diode
#1
RCVR
Fiber Tray
Pad
XMTR
RCVR
#2
Pad
Laser Diode
Pad
#3
RCVR
#4
Pad
XMTR
Pad
RCVR
Power
Supply #2
F2
3 Optional Receivers
3 Optional Transmitters
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 20
Block Diagram Left / Right Segmented Node with integrated 2:1 bdr
External
-20 dB TP
External
-20 dB TP
-20 dB
Fwd. TP
RF Switch
EQ
FWD
P1
Pad
Pad
AC
Bypass
Pad
REV
FWD
EQ
AC
Bypass
Pad
REV
Pad
-20 dB
Rev. TP
Power Director
-20 dB
Fwd. TP
RF Switch
P4
-20 dB
Rev. TP
Pad
Power Director
Thermal
Thermal
External
-20 dB TP
External
-20 dB TP
-20 dB
Fwd. TP
P2
-20 dB
Fwd. TP
RF Switch
Node
Signal Director
Jumper
AC
Bypass
FWD
EQ
-20 dB
Rev. TP
Pad
Pad
Power Director
Pad
Thermal
Thermal
RS
RS
RS
RS
RS = reverse switch
Crowbar
-20 dB
Fwd. TP
AC
Bypass
Pad
-20 dB
Rev. TP
Power Director
Crowbar
4x2 Reverse
Configuration Module
w/Aux Reverse RF
Injection
2x4
Forward Configuration
Module
External
-20 dB TP
P5
-20 dB
Rev. TP
REV
Pad
P3
AC
Bypass
FWD
EQ
Pad
Pad
REV
Power Director
Node
Signal Director
Splitter
RF Switch
AC
Bypass
Pad
Aux Rev
RF Inj.
(to RCM)
External
-20 dB TP
-20 dB
Fwd. TP
(to RCM)
5-210 MHz
Reverse Injection
Option
5-210 MHz
Reverse Injection
Option
P6
-20 dB
Rev. TP
Power Director
Optical
Interface Board
Power
Supply #1
Pad
Pad
Pad
Pad
Pad
Photo Diode
RCVR
Photo Diode
Fiber Tray
Pad
#1
RCVR
#3
Pad
F1
bdr Digital
Reverse Module
Pad
Power
Supply #2
F2
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 20
External
-20 dB TP
-20 dB
Fwd. TP
RF Switch
EQ
FWD
P1
Pad
Pad
AC
Bypass
Pad
REV
FWD
EQ
AC
Bypass
Pad
REV
Pad
-20 dB
Rev. TP
Power Director
-20 dB
Fwd. TP
RF Switch
P4
-20 dB
Rev. TP
Pad
Power Director
Thermal
Thermal
External
-20 dB TP
External
-20 dB TP
-20 dB
Fwd. TP
P2
-20 dB
Fwd. TP
RF Switch
Node
Signal Director
Jumper
AC
Bypass
FWD
EQ
-20 dB
Rev. TP
Pad
Pad
Power Director
Pad
Thermal
Thermal
RS
RS
RS
RS
RS = reverse switch
Crowbar
-20 dB
Fwd. TP
AC
Bypass
Pad
-20 dB
Rev. TP
Power Director
Crowbar
4x4 Reverse
Configuration Module
w/Aux Reverse RF
Injection
4x4
Forward Configuration
Module
External
-20 dB TP
P5
-20 dB
Rev. TP
REV
Pad
P3
AC
Bypass
FWD
EQ
Pad
Pad
REV
Power Director
Node
Signal Director
Splitter
RF Switch
AC
Bypass
Pad
Aux Rev
RF Inj.
(to RCM)
External
-20 dB TP
-20 dB
Fwd. TP
(to RCM)
5-210 MHz
Reverse Injection
Option
5-210 MHz
Reverse Injection
Option
P6
-20 dB
Rev. TP
Power Director
Optical
Interface Board
Power
Supply #1
#2
Pad
Pad
Pad
F1
bdr Digital
Reverse Module
bdr Digital
Reverse Module
Photo Diode
Pad
RCVR
RCVR
RCVR
Fiber Tray
Pad
#1
RCVR
#3
#4
Pad
Photo Diode
Pad
Photo Diode
Pad
Photo Diode
Power
Supply #2
F2
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 20
External
-20 dB TP
-20 dB
Fwd. TP
RF Switch
EQ
FWD
P1
Pad
Pad
AC
Bypass
Pad
REV
FWD
EQ
AC
Bypass
Pad
REV
Pad
-20 dB
Rev. TP
Power Director
-20 dB
Fwd. TP
RF Switch
-20 dB
Rev. TP
Pad
P4
Power Director
Thermal
Thermal
External
-20 dB TP
External
-20 dB TP
-20 dB
Fwd. TP
P2
-20 dB
Fwd. TP
RF Switch
Node
Signal Director
Jumper
Node
Signal Director
Splitter
RF Switch
AC
Bypass
AC
Bypass
FWD
EQ
-20 dB
Rev. TP
Pad
Pad
Pad
Pad
REV
Power Director
-20 dB
Rev. TP
REV
Pad
Power Director
Pad
Thermal
Thermal
RS
RS
RS
RS
RS = reverse switch
Crowbar
Crowbar
External
-20 dB TP
AC
Bypass
Power Director
Pad
-20 dB
Rev. TP
4x1 Reverse
Configuration Module
w/Aux Reverse RF
Injection
4x4
Forward Configuration
Module
-20 dB
Fwd. TP
P3
P5
FWD
EQ
Aux Rev
RF Inj.
External
-20 dB TP
-20 dB
Fwd. TP
(to RCM)
5-210 MHz
Reverse Injection
Option
Optical
Interface Board
P6
Power Director
bdr Processor
Module
Pad
#2
Pad
#1
Photo Diode
Photo Diode
Photo Diode
F1
Photo Diode
RCVR
#3
RCVR
#4
Pad
RCVR
Pad
Fiber Tray
-20 dB
Rev. TP
Power
Supply #1
RCVR
Power
Supply #2
AC
Bypass
Pad
(to RCM)
5-210 MHz
Reverse Injection
Option
F2
3 Optional Receivers
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 20
4 & 5/6
4 & 5/6
1X4
Forward
Configuration
Module
RCVR: 4
1X4
Redundant
Forward
Configuration
Module
RCVR: 4
4 & 5/6
4 & 5/6
2X4
Forward
Configuration
Module
RCVR: 4
PORTS: 2/3
RCVR: 4
4/5/6
PORTS: 1/2/3
5/6
2X4
Redundant
Forward
Configuration
Module
3X4
Forward
Configuration
Module
3X4
Forward
Configuration
Module
RCVR: 4
PORTS: 2/3
5/6
RCVR: 4
4X4
Forward
Configuration
Module
RCVR: 4
4 & 5/6
1X4
Forward
Configuration
Module
w/Forward RF
Injection
Forward RF
Injection
Forward Local
Injection Module
RCVR: 3
4 & 5/6
1X4
Redundant
Forward
Configuration
Module
w/Forward RF
Injection
Forward RF
Injection
Forward Local
Injection Module
RCVR: 3
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 20
PORTS: 2/3
5/6
5/6
4X1
Reverse
Configuration
Module w/Aux
Reverse RF
Injection
Aux Rev RF
Injection
Ports 3/6
XMTR: 1
PORTS: 2/3
5/6
4X2
Reverse
Configuration
Module w/Aux
Reverse RF
Injection
Aux Rev RF
Injection
Ports 3/6
XMTR: 1
4X1
Redundant
Reverse
Configuration
Module
XMTR: 1
PORTS: 2/3
PORTS: 2/3
XMTR: 1
PORTS: 2/3
5/6
5/6
4X3
Reverse
Configuration
Module w/Aux
Reverse RF
Injection
Aux Rev RF
Injection
Ports 3/6
XMTR: 1
PORTS: 2/3
4X3
Reverse
Configuration
Module w/Aux
Reverse RF
Injection
2
5/6
Aux Rev RF
Injection
Ports 3/6
5/6
4X2
Reverse
Configuration
Module w/Aux
Reverse RF
Injection
XMTR: 1
4X2
Redundant
Reverse
Configuration
Module
XMTR: 1
Aux Rev RF
Injection
Ports 3/6
PORTS: 2/3
5/6
4X4
Reverse
Configuration
Module w/Aux
Reverse RF
Injection
Aux Rev RF
Injection
Ports 3/6
XMTR: 1
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 20
Units
nm
mW
dBm
MHz
dB
dB
V DC
dBm
dBmV
dB
Notes
1
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 20
RF Section Specifications
General Station Performance
Pass Band
Input/Output Port Return Loss
Hum Modulation @ 12 A
Units
MHz
dB
dB
Hum Modulation @ 15 A
dB
dB
Units
dB
dB
dB
dB
70 MHz
1002 MHz
1002 MHz
870 MHz
750 MHz
650 MHz
550 MHz
70 MHz
Reverse
5-55
16
60 (5-10 MHz)
70 (11-55 MHz)
60 (5-10 MHz)
65 (11-55 MHz)
-20
dB
dB
dB
dB
79
69
70
dB
dB
72
68
dBuV
dBuV
dBuV
112.5
111
115
dB
dB
dB
78
68
70
Units
dB
dB
dB
dB
dB
Reverse
GaAs FET
-2
0.5
0
55
7.5
Forward
70-1002
17
70 (70-870 MHz)
60 (871-1002 MHz)
65 (70-870 MHz)
60 (871-1002 MHz)
-20
dB
dBmV
Notes
Notes
1
1
1,2
1
1
1
2,3
7
4
4,10
4
8
4
4,10
9
6
4
4,10
4
Notes
5
5
5
5
5
Notes:
1.
Forward performance is for station from output of optical Rx to node RF output port, with 0 dB pad in optical interface board (OIB), any forward configuration
module, 0.5 dB interstage (I/S) pad, 15 dB linear I/S EQ, factory select output pad, and signal director jumper. Includes OIB losses.
2.
Reference output tilt and internal tilt are both Linear tilt.
3.
The forward reference output tilt specified is achieved via field installation of appropriate linear I/S EQ, in conjunction with the internal tilt of the launch amplifier
and the tilt associated with the optical link (transmitter/receiver combination).
4.
Stated distortion performance is for launch amplifier section operated at reference output levels and tilts. Full station performance can be determined by
combining optic performance and launch amplifier performance.
5.
Reverse performance is for station from reverse input port to input of reverse optical transmitter module, with 0 dB reverse input pad.
6.
Loaded with 78 NTSC CW carriers from 77-550 MHz. Digital refers to 550 - 1002 MHz loading with QAM carriers at -6 dB relative to analog video carrier
levels.
7.
Loaded with 64 PAL B/G CW carriers from 112-600 MHz. Digital refers to 600 - 1002 MHz loading with QAM carriers at -6 dB relative to analog video carrier
levels.
8.
Loaded with 64 PAL I CW carriers from 88-600 MHz. Digital refers to 600 - 1002 MHz loading with QAM carriers at -6 dB relative to analog video carrier
levels.
9.
Tested per CENELEC Standard EN50083-3. RF output level is at 1002 MHz (forward).
10. X-mod (@ 15.75 kHz) specified using 100% synchronous modulation and frequency-selective measurement device.
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 12 of 20
Specifications, continued
Station Delay Characteristics
Forward
(Chrominance to Luminance Delay)
Frequency (MHz)
71.25 - 75.68
76.25 - 80.68
83.25 - 87.68
112.25 - 116.68
55 / 70 Split
Reverse
(Group Delay in 1.5 MHz BW)
Frequency (MHz)
5.0 - 6.5
6.5 - 8.0
8.0 - 9.5
50.5 - 52.0
52.0 - 53.5
53.5 - 55.0
Delay (nS)
15
8
4
3
Delay (nS)
35
15
7
9
15
27
Electrical
Max. AC Through Current (continuous)
Max. AC Through Current (surge)
Component DC Power Consumption (typical)
Launch Amplifier (includes reverse amp)
Status Monitoring Transponder
GS7000 Low Current Optical Receiver
Reverse Transmitter High Gain FP
Reverse Transmitter High Gain DFB
Units
Amps
Amps
Notes
@+24 VDC
@ +8 VDC
@ +5 VDC
@ -6 VDC
Amps
Amps
Amps
Amps
Amps
2.8
0.01
0.12
0.09
0.09
0.4
-
0.5
0.2
-
0.07
0.09
Amps
6.20
0.90
1.30
0.80
15
25
85
80
75
AC Voltage
70
65
60
55
50
45
AC Current
(A)
1.4
1.4
1.4
1.5
1.5
1.6
1.7
1.8
2.0
2.2
Power (W)
96.4
96.2
95.9
95.6
95.4
95.4
95.3
95.3
95.5
95.8
AC Current
(A)
1.7
1.7
1.7
1.8
1.9
2.0
2.1
2.3
2.5
2.8
Power (W)
121.5
121.1
120.8
120.6
120.6
120.5
120.5
120.7
120.9
121.
0
I DC
GS7000 Node
with: 1 forward Rx,
1x4 forward config
module,1 reverse Tx,
4x1 reverse config
module
with: 4 forward Rxs,
4x4 forward config
module,4 reverse
Txs, 4x4 reverse
config module
(Amps at 24
VDC)
2.95
3.70
Data is based on stations configured with status monitoring transponder. AC currents specified are based on measurements made with typical
CATV type ferro-resonant AC power supply (quasi-square wave).
DC supply has a fixed under-voltage lockout of 33 V AC.
Environmental
Operating Temperature Range
Relative Humidity Range
Mechanical
Housing Dimensions
21.3 in. L x 11.6 in. H x 11.1 in. D
(541 mm x 295 mm x 282 mm)
Units
degrees
percent
Weight
Station with 4 RX, 4 TX, 2 power supplies: 50.0 lbs.
(22.7 kg)
Unless otherwise noted, specifications reflect typical performance and are referenced to 68F (20C). Specifications are based upon
measurements made in accordance with SCTE/ANSI standards (where applicable), using standard frequency assignments.
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 13 of 20
Ordering Information
The GS7000 Node is available in a wide variety of configurations. The GS7000 Ordering Matrix provides ordering
information for configured node stations. This page contains ordering information for required and optional
accessories. Please consult with your Account Representative, Customer Service Representative, or Applications
Engineer to determine the best configuration for your particular application.
Required Accessories
Plug-in Pads (attenuators) Available in 0.5 dB steps from 0 to 20 dB
1 required for each Optical Receiver Module installed in the node (for Optical Interface Board)
1 required for each Optical Transmitter Module installed in the node (for Optical Interface Board)
1 required for each Reverse input path activated (for Launch Amplifier)
Optional Accessories
Plug-in Forward Linear Equalizers Available in 1.5 dB steps from 0 to 21 dB.
Node shipped with 15 dB Linear Equalizers (4)* installed for 14.5dB of tilt to 1002 MHz (*4008787)
Plug-in Signal Directors 2 required
Node shipped with Jumpers installed to activate 4 RF output ports
Optional 2-Way Splitters are required to activate 5 or 6 RF output ports
Part Number
589693 (0 dB)
sequentially thru
589734 (20.5dB)
4007228 (0 dB)
see table below
4011907
4011908
Note: Configured nodes ship without reverse input pads and any of the pads on the OIB. All other standard accessories are shipped from the
factory. Forward Launch Amp attenuator pads, (4) 15 dB linear Eqs, and (2) signal director jumpers are shipped with every configured node.
Part Number
on Module
4019268
Part Number
for Ordering
4019264
4019273
4019275
4022272
4019277
4019279
4024784
4024786
4019281
4019283
4019284
4022270
4019285
4019286
4024783
4024785
4019287
4007228
4008778
4008779
4008780
4008781
4008782
4008783
4008784
4008785
4008786
4008787
4019258
4019259
4019260
4019261
4009369
4009371
4011907
4011908
4022468
4022469
4022470
4013593
4013594
4013595
4013575
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 14 of 20
Part Number
on Module
4010479
Part Number
for Ordering
4011914
4014282
4009066
4011918
4011919
4014285
4011920
4014286
4014300
4009076
4024788
4024791
4014289
4011921
4024787
4024790
4011922
4013900.1310
4013901.1310
4013902.1310
4011964
4012069
4012070
4011952
4011953
4011954
4011958
4011959
4011960
Part Number
on Module
4013900.1470
4013900.1490
4013900.1510
4013900.1530
4013900.1550
4013900.1570
4013900.1590
4013900.1610
Part Number
for Ordering
4011955
4011956
4011957
4011961
4011965
4011966
4011967
4011968
4013901.1470
4013901.1490
4013901.1510
4013901.1530
4013901.1550
4013901.1570
4013901.1590
4013901.1610
4011969
4011970
4011974
4011975
4011976
4011977
4013218
4013299
4013902.1470
4013902.1490
4013902.1510
4013902.1530
4013902.1550
4013902.1570
4013902.1590
4013902.1610
4013542
4013543
4013544
4013545
4013546
4013547
4013548
4013549
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 15 of 20
Part Number
on Module
4022938.19
4022938.20
4022938.21
4022938.22
4022938.23
4022938.24
4022938.25
4022938.26
4022938.27
4022938.28
4022938.29
4022938.30
4022938.31
4022938.32
4022938.33
4022938.34
4022938.35
4022938.36
4022938.37
4022938.38
4022938.39
4022938.40
4022938.41
4022938.42
4022938.43
4022938.44
4022938.45
4022938.46
4022938.47
4022938.48
4022938.49
4022938.50
4022938.51
4022938.52
4022938.53
4022938.54
4022938.55
4022938.56
4022938.57
4022938.58
4022938.59
Part Number
for Ordering
4022938.19
4022938.20
4022938.21
4022938.22
4022938.23
4022938.24
4022938.25
4022938.26
4022938.27
4022938.28
4022938.29
4022938.30
4022938.31
4022938.32
4022938.33
4022938.34
4022938.35
4022938.36
4022938.37
4022938.38
4022938.39
4022938.40
4022938.41
4022938.42
4022938.43
4022938.44
4022938.45
4022938.46
4022938.47
4022938.48
4022938.49
4022938.50
4022938.51
4022938.52
4022938.53
4022938.54
4022938.55
4022938.56
4022938.57
4022938.58
4022938.59
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 16 of 20
Part Number
on Module
4018950.19
4018950.20
4018950.21
4018950.22
4018950.23
4018950.24
4018950.25
4018950.26
4018950.27
4018950.28
4018950.29
4018950.30
4018950.31
4018950.32
4018950.33
4018950.21
4018950.35
4018950.36
4018950.37
4018950.38
4018950.39
4018950.40
4018950.41
4018950.42
4018950.43
4018950.44
4018950.45
4018950.46
4018950.47
4018950.48
4018950.49
4018950.50
4018950.51
4018950.52
4018950.53
4018950.54
4018950.55
4018950.56
4018950.57
4018950.58
4018950.59
Part Number
for Ordering
4018949.19
4018949.20
4018949.21
4018949.22
4018949.23
4018949.24
4018949.25
4018949.26
4018949.27
4018949.28
4018949.29
4018949.30
4018949.31
4018949.32
4018949.33
4018949.34
4018949.35
4018949.36
4018949.37
4018949.38
4018949.39
4018949.40
4018949.41
4018949.42
4018949.43
4018949.44
4018949.45
4018949.46
4018949.47
4018949.48
4018949.49
4018949.50
4018949.51
4018949.52
4018949.53
4018949.54
4018949.55
4018949.56
4018949.57
4018949.58
4018949.59
4018950.1310
4018949.1310
4018950.1470
4018950.1490
4018950.1510
4018950.1530
4018950.1550
4018950.1570
4018950.1590
4018950.1610
4018949.1470
4018949.1490
4018949.1510
4018949.1530
4018949.1550
4018949.1570
4018949.1590
4018949.1610
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 17 of 20
bdr Digital Processor Modules (must be used with Digital Laser Module)
bdr 4:1 Digital Processor Module for GS7000 Node (5-40 MHz)
bdr 4:1 Digital Processor Module for GS7000 Node (7-42 MHz)
bdr Digital Laser Modules (must be used with Digital Processor Module)
0 dBm. Digital Laser Module, 1310 nm, DFB, SC/APC
0 dBm, Digital Laser Module, 1310 nm, DFB, SC/UPC
0 dBm, Digital Laser Module, 1310 nm, DFB, FC/APC
0 dBm, Digital Laser Module, 1550 nm, DFB, SC/APC
0 dBm, Digital Laser Module, 1550 nm, DFB, SC/UPC
0 dBm, Digital Laser Module, 1550 nm, DFB, FC/APC
DWDM bdr Digital Laser Modules (must be used with Digital Processor Module)
7 dBm, ITU Grid, CH. 12, 1567.95 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 13, 1567.13 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 14, 1566.31 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 15, 1565.50 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 16, 1564.68 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 17, 1563.86 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 18, 1563.05 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 19, 1562.23 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 20, 1561.42 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 21, 1560.61 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 22, 1559.79 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 23, 1558.98 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 24, 1558.17 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 25, 1557.36 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 26, 1556.56 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 27, 1555.75 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 28, 1554.94 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 29, 1554.13 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 30, 1553.33 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 31, 1552.52 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 32, 1551.72 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 33, 1550.92 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 34, 1550.12 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 35, 1549.32 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 36, 1548.52 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 37, 1547.72 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 38, 1546.92 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 39, 1546.12 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 40, 1545.32 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 41, 1544.53 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 42, 1543.73 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 43, 1542.94 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 44, 1542.14 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 45, 1541.35 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 46, 1540.56 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 47, 1539.77 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 48, 1538.98 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 49, 1538.19 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 50, 1537.40 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 51, 1536.61 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 52, 1535.82 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 53, 1535.04 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 54, 1534.25 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 55, 1533.47 nm, Digital, SC/APC
7 dBm, ITU Grid, CH. 56, 1532.68 nm, Digital, SC/APC
Part Number
on Module
748693
751163
Part Number
for Ordering
4013562
4013563
4011942
4011943
4011944
4011946
4011947
4011948
4011905
4011906
4011909
4011971
4011972
4011973
Part Number
on Module
4013586.12
4013586.13
4013586.14
4013586.15
4013586.16
4013586.17
4013586.18
4013586.19
4013586.20
4013586.21
4013586.22
4013586.23
4013586.24
4013586.25
4013586.26
4013586.27
4013586.28
4013586.29
4013586.30
4013586.31
4013586.32
4013586.33
4013586.34
4013586.35
4013586.36
4013586.37
4013586.38
4013586.39
4013586.40
4013586.41
4013586.42
4013586.43
4013586.44
4013586.45
4013586.46
4013586.47
4013586.48
4013586.49
4013586.50
4013586.51
4013586.52
4013586.53
4013586.54
4013586.55
4013586.56
Part Number
for Ordering
4013560.12
4013560.13
4013560.14
4013560.15
4013560.16
4013560.17
4013560.18
4013560.19
4013560.20
4013560.21
4013560.22
4013560.23
4013560.24
4013560.25
4013560.26
4013560.27
4013560.28
4013560.29
4013560.30
4013560.31
4013560.32
4013560.33
4013560.34
4013560.35
4013560.36
4013560.37
4013560.38
4013560.39
4013560.40
4013560.41
4013560.42
4013560.43
4013560.44
4013560.45
4013560.46
4013560.47
4013560.48
4013560.49
4013560.50
4013560.51
4013560.52
4013560.53
4013560.54
4013560.55
4013560.56
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 18 of 20
4013586.57
4013586.58
4013586.59
4013560.57
4013560.58
4013560.59
Part Number
on Module
4023056
4012887
Part Number
for Ordering
4011927
4011928
4009226
4011930
4027113
4025872
-
4027114
4025871
4036793
4016084
4013568
4042908
4057377
4026885
4028274
4027000
4009045
4027378
4028275
4012095
4027376
4026885
4028274
4027000
4027740
4027741
4027007
4027008
4027009
4027010
4027011
4027012
4027013
4027014
test points)
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 19 of 20
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other
countries. A listing of Ciscos trademarks can be found at www.cisco.com/trademarks.
Third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1009R)
Product and service availability are subject to change without notice.
2010, 2012 Cisco and/or its affiliates. All rights reserved.
Cisco Systems, Inc.
1 800 722-2009 or 678 277-1120
www.cisco.com
__________________________________________________________________________________________________________________
2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 20 of 20