Beruflich Dokumente
Kultur Dokumente
www.mvtech.com.au
713
DRIESCHER Voltage testing system (VDS)
for rated voltages 12 kV, 24 kV, 36 kV and 38.5 kV
19
10
11
11
12
Production program
713
Busbar
Head armament
Outer electrode (braiding)
Inner electrode
Insulating rod
Base armament
Lateral connection for
measurement
Fastening cross bar
713
Voltage testing system for rated voltages above 1 kV
Testing the off-load condition and phase comparison
on medium-voltage switchgears is gradually becoming
a problem, based on their increase in use.
Voltage testing systems have therefore been introduced to meet all safety requirements in such systems.
Connecting module
1
2
3
4
5
6
Display unit
713
Voltage testing system for rated voltages above 1 kV
In the VDE 0682 Part 415 (IEC 61243-5) for capacitor voltage testing systems the voltage is defined as
nominal voltage and in DIN VDE 0670 Part 6 for
medium-voltage switchgears the voltage is defined
as rated voltage (refer to table).
Nominal voltage in kV
Rated voltage in kV
6
7.2
10
12
20
24
30
36
713
DRIESCHER Divider insulators for rated voltages of up to 38.5 kV
DRIESCHER Divider insulator
Divider insulators
Type SI
Version in compliance with DIN VDE 0674 Part 4 and DIN VDE 0441 Part 3
Rated voltage of up to 38.5 kV /50Hz
Coupling capacity for voltage testing system of DEHNcap in compliance with VDE 0682 Part 415
Head fitting: Connection to active part of the high voltage system
Base fitting: Mounted on the earthed switchgear frame
Technical Data
Material/Colour: cast resin, brown (RAL 8017)
Connection of head fitting: 4 x M6/ 1 x M10 Base fitting: M16 (refer to drawing on page 12)
Coupling electrode connection, 2-pin connector coupling, anti-torsion and suitable for interface module DEHNcap/M
Mechanical strength
Bending strength > 5000 N
Tensile strength > 25 kN
Twisting strength > 300 Nm (tightening direction)
Operating temperature - 20C . + 40C
713
DRIESCHER - Divider insulator for rated voltages of up to 38.5 kV
All dimensions in mm
Type
Ur
in kV
Coupling capacity
in pF
Length of creepage
in mm
Number of
screens
Weight
in kg
Article
no.
SI2-94099
SI2-93948
SI2-067696
SI2-096111
12
24
36
38.5
10
12
2.1
2.1
175
275
430
460
3
5
7
7
0.930
1.370
2.650
2.950
2-45194099
2-45193948
2-45165402
2-45165403
713
Voltage testing system for rated voltages above 1 kV
Coupling elements DEHNcap for voltage testing systems in compliance with VDE 682 Part 415
For verifying isolation
- e.g. according to UVV VBG 4 in enclosed switchgear systems
Article-no.
4000
4500
7000
150
680
3.5
3.5
6.8
0.828
0.916
1.908
2-33600812
2-33600824
2-33600838
Dehncap/M-LRM
12
12...24
24...38.5
14
14
14
4000
4500
7000
2200
6800
22000
2.6
3.7
8.0
0.828
0.916
1.308
2-33600815
2-33600825
2-33600835
Dehncap/M-KVDS*
12...38.5
12...38.5
4500
5500
0.736
0.812
2-33600924
2-33600927
713
Electronic voltage transformer with visual display system up to 38.5 kV
Display unit DEHNcap for voltage testing systems in compliance with VDE 0682 Part 415 (IEC 61243-5)
For testing
voltage-free condition
In-phase condition
Dimensions
in mm
41 x 46 x 35
41 x 46 x 35
Weight
approx. kg
0.060
0.060
HR
90 V~
36 MOhm
50 Hz
19 mm
IP 66
LRM
5 V~
2 MOhm
50 Hz
14 mm
IP 66
Weight
approx. kg
0.070
Article-no.
2-33703025
713
Voltage testing system for rated voltages over 1 kV
Type DEHNcap/A-LRM
Active electronic unit with visual display and self-testing device
for the LRM system, interface tester
Type DEHNcap/IT-HR
Active electronic device with visual display for the HR system
Type DEHNcap/IT-LRM
Active electronic device with visual display for the LRM system
Voltage display unit DEHNcap/A
Type HR
Type LMR
Rated voltages up to 45 kV / 50 Hz
In compliance with DIN VDE 0682 Part 415 (IEC 61243-5)
- active display unit for testing voltage-free condition
- with integrated self-testing device
- with battery monitoring
Technical data
System
HR
LRM
Display threshold
90 V~
5 V~
Input impedance
36 MOhm
2 MOhm
Rated frequency
50 Hz
50 Hz
Battery installed (IEC 6LR61)
Self-testing installed, testing of electronic operation Displays
LED" " (flashing light) in red,
with "voltage applied"
LED "0" (permanently illuminated) in green
with "no voltage applied"
Type
HR
LRM
Dimensions
in mm
120 x 60 x 25
120 x 60 x 25
Type HR
Weight
approx. kg
0.150
0.150
Article-no.
2-33703050
2-33703051
Type LMR
Rated voltages up to 45 kV / 50 Hz
In compliance with DIN VDE 0682 Part 415 (IEC 61243-5)
- active display unit for repeated testing of coupling elements
of plug-on
Voltage testing systems
- with integrated self-testing device
- with battery monitoring
Technical data
System
HR
LRM
Test threshold
3,2 A~
3,2 A~
Input impedance
36 Mohm
2 MOhm
Rated frequency
50 Hz
50 Hz
Battery installed (IEC 6LR61)
Self-testing installed, testing of electronic operation
Displays, LED "no" (permanently illuminated) in red
when "test not passed"
LED "yes" (permanently illuminated) in green
when "test passed"
10
Type
HR
LRM
Dimensions
in mm
120 x 60 x 25
120 x 60 x 25
Weight
approx. kg
0.150
0.150
Article-no.
2-33703060
2-33703061
713
Voltage testing systems for rated voltages over 1 kV
Phase comparator
Phase comparator DEHNcap/PC
Rated voltages up to 45 kV / 50 Hz
In compliance with DIN VDE 0682 Part 415 (IEC 61243-5)
- active display unit for testing in-phase condition
- with battery monitoring
Technical data
System
LRM
Input impedance
2 MOhm
Rated frequency
50 Hz
Battery installed (IEC 6LR61)
Ready condition, automatic disconnection after approx. 1 min
Display, LED "_" not in-phase (permanently illuminated)
Colour is red when phase angle > 60
LED "=" (permanently illuminated) Colour is green
with "in-phase condition"
LED "POWER ON" (permanently illuminated) colour is yellow
when device in ready condition
Measuring leads, 3 measuring leads with 4 mm connector
- Measuring lead "LA", is 2000 mm long, blue
- Measuring lead "LB", is 2000 mm long, blue
- Measuring lead "Earth", is 2000 mm long, black
Type
LRM
Dimensions
in mm
145 x 85 x 32
Weight
Article-no.
approx. kg
0.250
2-33703065
HR-LRM
LR-LRM
Type
XC-LRM
Dimensions
Weight
Article-no.
in mm
approx. kg
85 x 50 x 30
0.080
2-33703070
105 x 50 x 30
0.090
2-33703071
85 x 50 x 30
0.080
2-33703072
11
MV Technology Solutions
MV Technology Solutions is an
Australian company that supplies a
diverse range of high quality products for
the Power and Rail sector throughout
Australia and New Zealand
OUR OFFERINGS
MV Technology Solutions only partner
with leading brands to ensure your
products are of high quality and meet both
our local electrical requirements and
withstand our vast variety of climates
within Australia and New Zealand
TECHNICAL SUPPORT
MV Technology Solutions have the
capabilities to assist you in correct selection
of your product requirements ensuring your
equipment will meet the desired application
for every project on every occasion.
CUSTOMER SERVICE
Please contact our customer service
office for any further information
Ph: +61 (0) 2 9726 7702
Email: info@mvtechnology.com.au
DRIESCHER
Phone: (02) 9726 7702 - Fax: (02) 9726 7703
www.mvtech.com.au
Moosburg
Subject to change without prior notice. The information in this document contains general
descriptions of the technical options available, which may not apply in all cases. The
required technical options should therefore be specified in the contract.