Beruflich Dokumente
Kultur Dokumente
HSE Questionnaire
Work at Height
Q. No.
Question
The rungs of a ladder shall be spaced not more than __________ apart centre to
centre.
The overall length of the extension ladder shall not exceed ___________.
The sliding section of an extension ladder shall not exceed __________ in number
The minimum distance between side-rails of trestle ladders shall be not less than
__________.
11
When height of a fixed ladder exceeds _________ height, landing platform shall
be provided.
12
13
14
16
17
As per OSHA standard, the entire scaffold should be tied to the permanent
structure at intervals not to exceed ________ horizontally and _________
vertically.
18
Page 1 of 3
19
When free-standing mobile scaffold towers are used, the height shall not exceed
______ times the minimum base dimension.
20
21
Lifting of frame and other parts of Scaffolding shall be carried out using
_________ arrangement.
22
23
24
25
List out the four safety requirements that are to be checked before lifting a wall /
column panel.
26
27
A Heavy duty tower / Light duty scaffolding / Stair Tower of L&T Scaffold System
shall be fixed to the permanent structure at every _________ distance vertically.
28
List out two safety requirements which are to be observed while lifting a lift shaft
formwork panel.
29
List out two safety requirements which are to be met while using Slipform
technique.
30
31
32
Every Working Platform shall be provided with a ladder or any other safe means of
access. Yes / No
33
34
35
36
37
38
Use of Crane Suspended Platform for carrying out welding works shall be
avoided. YES / NO
Page 2 of 3
39
A minimum safety factor of ________ shall be maintained for the load line (wire
rope) of the crane while using a Crane Suspended Man-cage.
40
The combined weight of the loaded personnel platform and its rigging must not
exceed ______ percent of the rated capacity of the crane for the radius and
configuration of the crane.
41
A crane suspended man cage should be designed to support platform weight and
at least _________times the maximum intended load.
42
43
Man Cage should be tested with a proof load of 150% of the safe working load.
44
Suspension ropes used for a personal suspension system shall be not less than
________ polypropylene rope or any synthetic rope of equivalent strength. In case
of hot works steel wire rope of minimum ______ diameter shall be used.
45
Page 3 of 3