Beruflich Dokumente
Kultur Dokumente
Tutorial
李流-ちゃん☺
Banneresque 4
Tutorial
Oh, before I begin, i'd like to mention right now that this tutorial will not work on all pictures. Coloring tutorials
NEVER work on all pictures. Each picture is unique and has its own color attributes. So. All of the color balance
and selective color layers? Totally editable. Just change them to work towards your own image, ok?
Step One:
Find a picture
I cropped it down to 600*356.
Step Two:
I created a new curves layer by going Layer >> New Adjustment Layer >> Curves and used these settings below:
Step Three:
I created a color balance layer by going
Layer >> New Adjustment Layer >> Color Balance
and used these settings below:
Step Four:
I created a new selective color layer by going
Layer >> New Adjustment Layer >> Selective Color
and used these settings (set method to Relative):
Green : Red : Neutrals :
cyan : 100% cyan : 12%
cyan : 100%
magenta : 0% magenta : 20%
magenta : 100%
yellow : 100% yellow : 17%
yellow : 44%
black : 100% black : -17%
black : 0%
White : Yellow :
cyan : 17% cyan : -100%
magenta : 5% magenta : 45%
yellow : 12% yellow : 58%
black : 0% black : 25%
李流-ちゃん☺
Step Five:
I created a new layer (Layer >> New Layer) and filled it with the color #100F35 and set the layer to Exclusion.
Step Six:
I duplicated my base, way down at the bottom, and dragged it up top and set that duplicated layer up top to
Soft Light.
So far, my graphic looks like this:
Step Seven:
I created another new Color Balance
layer and used these settings
Step Ten:
I created a new Selective Color layer and used these settings (set method to Relative) :
Cyan : Green : Red : Yellow :
cyan : 100% cyan : -100% cyan : -100% cyan : 100%
magenta : 100% magenta : 100% magenta : 100% magenta : 46%
yellow : 12% yellow : -100% yellow : 65% yellow : -100%
black : 66% black : 100% black : 58% black : 32%
Step Eleven:
To try and consolidate all my editing together,
I created a new layer and then on my
keyboard hit cntrl+alt+shift+e this merging
everything below together and putting
it on my new layer.
So far, I have this:
李流-ちゃん☺
Step Twelve:
Now, I know that this effect is a bit cliche, but
I'm trying to go with this dreamy, princess-y theme,
so I'm going to use the dream effect. So, I'm going to
duplicate the top layer and go Filter >> Blur >> Gaussian Blur
and i'm going to do the filter at 5 pixels.
Step Thirteen:
So, after I have my blurriness, I'm going to take
a large, REALLY LARGE, soft edged eraser,
with it set at 40% Opacity I'm going to erase
the area of the blurriness over the tiara.
Erase the parts that are red.
Step Fourteen:
Add your own finish touches! It's up to you. The choice is yours.
李流-ちゃん☺
Banneresque Colouring 3
Tutorial
Step Uno: Grab your base
For this lovely tutorial, I am
using a picture of the even
lovlier Gaspard Ulliel, who
was seriously born to play
Edward and some people
just can't see that, but
ANYWAYS.
李流-ちゃん☺
Step Four: CURVEy
Now, we're going to add some coloring. WHOOT! So, go to LAYER >> New Adjustment Layer>> Curves and input
these settings:
result
''
李流-ちゃん☺
Step Six: Yellerrr
Make a new layer
(Layer>>New Layer), fill it
with the color: D3C205 and
set it to Soft Light @ 100%
Opacity, which yes, makes
a slightly ugly yellow hue to
everything but really, it
looks better in the end.
李流-ちゃん☺
Step Nine: Layered
Duplicate your base,
way down at the
bottom, drag it on up
your layers pallete,
and set that to Soft
Light @ 40% Opacity.
So far:
Channel : RGB
Input : 96
Output : 109
Red :
cyan : -69%
magenta : 33%
yellow : 13%
black : -10%
to give result :
李流-ちゃん☺
Step Thirteen:
Orraanggee
New color layer, fill
it with FDEEE0 and
set it to Darken @
100%, to give you
Step Fourteen:
Violeta
New color layer, fill
it with FFF0F5, and
set it to ColorBlurn
@ 100%, to give
you
李流-ちゃん☺
Step Sixteen: Balancenco
Layer >> New Adjustment Layer >> Color Balance, with these settings
to give this
What you have to do is drag the center a little off to the right, because Edward, i'm sorry Gaspard, is off to the
right a bit. It doesn't quite have to be exact, just..near him.
When I did this, I got this:
李流-ちゃん☺
Now all you have to do is take a fairly large soft edged eraser, and just click once in the center, where he is.
Once yuo've done the erasing, set the layer to Soft Light @40% Opacity
to give
I don't know why I did it twice. It seems stupid, now that I think about it.
李流-ちゃん☺
Step Nineteen: Seein' Double
Create a new layer. Hit cntrl+alt+shift+e. Resize it, cntrl+t, make it smaller and move it off to the left side of his
head. Using a large soft edged eraser, set it to soft light.
And then, you're done! Just add some text, border, whatever!
李流-ちゃん☺
Beenly's Iconing 01
Tutorial
01. Open up your base! ( Sharpen if you want. )
04. Make a new FILL layer and use the Paint Bucket
Tool. Fill the new layer with #04637f and set the
layer to OVERLAY. Set the layer opacity to 88%.
(Here's the color if you're too lazy to fill the layer.
You can just copy image/paste if you wanted to.)
You
u should have the first effect!
OPTIONAL:
If you want the second effect of making the icon
brighter, just duplicate your final icon and set the
duplicated layer to SCREEN. Set the layer opacity to
24%.
李流-ちゃん
ん☺
Cold Faded Color Photo
Tutorial
Open image, -set that layer to overlay at an opacity of 50.
I will be using this beautiful image of
Britney Spears:) -Duplicate that layer, and go to
"filter>blur>gaussian blur>" and chose a blur level
3.0. Set this layer to overlay just like the previous
one, and the opacity to 65.
GREENS:
cyan=+39
BLUES:
cyan=+100
magenta=-100
李流-ちゃん☺
-Go to "layer>new>layer..."
You can merge all the visible layers or leave it as
-Go to "edit>fill>color>"
choose this color: 00aeef is...Enjoy!
or one which is similar.
Set this layer to soft light and set the opacity to 20.
李流-ちゃん☺
Color Enhancement
Tutorial
From this: Magenta: +100%
Final one: Yellow: 0%
Black: 0%
Yellows:
Cyan: -10%
Magenta: 0%
Yellow: +10%
Image:
Black: 0%
Greens:
Cyan: -10%
Magenta: -15%
Yellow: +100%
Black: 0%
Note: If you are going to use a different image, play
around with the settings and opacities
Blues:
1. First copy and paste the image into photoshop. I am
Cyan: +100%
currently using PS 7.
Magenta: 0%
2. Sharpen the image (Filter>>Sharpen>>Sharpen).
Yellow: 0%
3. Duplicate the layer (Layer>>Duplicate Layer) and set
Black: -20%
the layer mode to Screen at 85%
4. Merge the layers (Ctrl+E).
5. Go to Hue/Saturation (Ctrl+U) and adjust the
and you're done!
Saturation to +35.
6. Next, create new a Selective Color layer (Layer>>New
Final:
Adjustment Layer>>Selective Color) and match your
settings to mine.
Reds:
Cyan: -100%
李流-ちゃん☺
Have a Black & White Photo With a Hint of Color
Tutorial
We're going to go from this> to this>
002.Then do a CTRL+J
李流-ちゃん☺
004.Then select the "Monochrome" box and select "OK" to change the photograph to black and white.
005.With "Layer 1" selected, change the layer's opacity to 006.Now you have your final product!
85%.
李流-ちゃん☺
Icon Colorizing 1 Icon colorizing 2
Tutorial Tutorial
From> To>
01. Make a new layer and fill it with #061E4A. Set that
Layer to Difference, Opacity 60%.
06. Make One more layer and fill it with #030827. Set your
layer to exclusion.
李流-ちゃん☺
Icon Colorizing 3 Icon Tutorial III
Tutorial Tutorial
1. Find a base. This will be mine:
1. okay so grab your base.
4. Go to "Layer" and "Flatten image" and your done! 6. Now, create a curves layer. Layers >> New
Adjustment Layer >> Curves.
5. IF you want you can add brushes or text, for a different First point: In(126), Out(153)
Second point: In(173), Out(193)
This is my result:
李流-ちゃん☺
Iconesque Colouring 1 that to multiply as well.
So far, I have this:
Tutorial
You're going to get this icon:
Steps:
7. Now for a good ol' exclusion layer, which tops it all off.
1. Okay, so, I've already cropped my picture and have
Sort of. I created another, omg another how many have
gotten my base:
we made so far?, later and filled it with #080033 and set
that to Exclusion. I also lowered that layers opacity to
50%. I didn't like the complete washed out look it gave at
100%.
8. Now you are done with the coloring layers, and now to
finishing the icon. I took a soft edged brush,
4. Now, with the coloring. The best part. Create a new Shown in the last image.
layer above it all, and fit it, with your paint bucket
9. And now, I added some text that says "HANGING" with
李流-ちゃん☺
colour. Now set that to Multiply
So Far:
5. Now, create a new layer above the blue one, and fill it in
with white. (FFFFFF). Now, set that layer to Colorwith
a 40% Opacity .
So Far:
8. Aye, one last color layer. Create another new layer, fill it
in with a dark blue like 0C0034 and set it toScreen. Finally
done with color layers!
Steps:
9. Now i'm going to finish the icon, adding on the last
1. Getcha a base. details and such. I create another new layer, and stick this
brush down in the bottom-ish corner. It'll let my text stand
2. Duplicate the base and set it to Soft Light out better.
10. I add my text over the white brush. " I'm A " is Arial, 14
pt and then "SPY" is Arial Black 14 pt with kerning on both
being at -100 (read pt.1 for help on this)
11. Add some borders, 3px white inside and then 1px
3. Now the image is somewhat dark yet somewhat vibrant.
black inside, and voila! (Pt. 1 explains how I did this)
Which is good. Now, create a new layer above that and fill
it, with the paint bucket tool with FFF1E4, a light orange-y
李流-ちゃん☺
Iconesque Colouring 3
Tutorial
1. Grab your base, as usual.
李流-ちゃん☺
12. Finally, add a 2px border, and,whadda know! We're
done!
Iconesque colouring 4
Tutorial
1. Obtain base
4. Create new layer, fill with #f0f23f and set to Soft Light.
2. New Curves Layer (Layer >> New Adjustment Layer Yes, this is going to make your icon rather yellow, but it'll
>> Curves) balance out eventually.
Use the following settings:
Reds:
C: -100
M: +100
Y: +100
K: 0
Yellows:
C: 0
M: 0
Y: -100
3. New Color Balance Layer (Layer >> New Adjustment K: 0
Layer >> Color Balance)
Use the following settings: Greens:
C: +100
M: +100
Y: +100
K: -100
Cyans:
李流-ちゃん☺
C: +100 M: 0
M: 0 Y: 0
Y: +100 K: 0
K: 0
Whites:
C: +100
M: +100
Y: -2
K: 0
7. It still needs something else, so I added a new layer
Neutrals: and filled it with #c8f3f8 and set it to Color Burn.
C: +19
M: -51 8. Finally, I created another layer, filled it with
Y: -51 #f8c8d1 and set it to Color Burn as well, to give us our
K: 0 final product!
Voila!
6. Now I feel that the icon just needs a little more, so I
create another Selective Coloring layer, and use these
settings:
Reds:
C: +100
M: -61
Y: 0
K: 0
Yellows:
C: 0
M: 0
Y: -100
K: 0
Cyans:
C: +100
M: +100
Y: -41
K: 0
Magentas:
C: +100
M: +100
Y: +100
K: +100
Blacks:
C: +7
李流-ちゃん☺
Iconing V.1 Ft.Arron Yan
Tutorial
Then we'll make it into this:
Now you should make a new layer then paste the image
that you have copied before hand. It should look like this:
Now use the erase tool and erase the right side of layer
very carefully. I used the circle to erase and make sure the
px is small. Less than 30 at least. It should then look
something smiliar:
3. Now it's time to make the image look like the one above
by moving it. Click on the move tool and move LAYER 2 to
the left. It should be something like this:
李流-ちゃん☺
one above. Make a new layer and dump #28aec0 on the
ocean coloring
image. Then set it to color burn at 79%. Looks like this:
Tutorial
I'm starting with this picture:
Yellows
Cyan : +71
Magenta: -29
Yellow : +100
Black : +87
Neutrals
Cyan : +23
Magenta: 0
Yellow : +12
Black : -14
White
Cyan : 0
Magenta: 0
Yellow : 0
Black : -58
Make a new Photo Filter layer with the filter "Cooling Filter
李流-ちゃん☺
(LBB)" with 10% density.
Movie-
Movie-like Effect
Tutorial
Now copy this picture:
Before :
After :
李流-ちゃん☺
Depth of Field effect :
李流-ちゃん☺
layer with black. [ Edit > Fill > Black ]. Set the Opacity of
the layer to 70% by pressing the number 7 on your
keyboard –
Film Effect :
7. Make a new layer. [ Layer > New > Layer ]. Fill this
李流-ちゃん☺
Cinemascope effect :
11. Add black bars on the top and bottom of your photo
using your Rectangle Shape Tool and you're done!
李流-ちゃん☺
Rosy Skintone Painted Image Effect
Tutorial
Click on thumbnailed images to enlarge
This> To >
02. Duplicate the base and bring it to the top Set it Tutorial
To Softlight, Opacity 85%.
Mmk, what we're trying to achieve:
05. Now Duplicate your base. (ctrl+J) 1. Grab yo image. I'm using one of Kevin Devine, who's
real awesome.
李流-ちゃん☺
though.
Nearly done!
李流-ちゃん☺
Pale Pink Colour 4. Then go to Layer >> New Adjustment Layer >>
Hue/Saturation and follow my settings:
Tutorial
6. Make a new layer and fill it with the color #e5dac1 and
set it to Overlay @ 25% Opacity .
李流-ちゃん
ん☺
The B&W Effect
Tutorial
李流-ちゃん☺
Turn Your Photo Into A
005.This step depends on your picture, so just play
Watercolor Painting around with the settings. If you want to use my settings,
Tutorial go ahead:
Brush Detail: 14
001.First thing, open your picture Shadow Intensity: 0
Texture: 1
李流-ちゃん☺
Brightness: 32
Contrast: 10
Vintage Coloring Effect
Tutorial
李流-ちゃん☺
4. Make a new layer and fill the background with #bfecff.
Set the blend mode to SOFT LIGHT & the opacity to 50%.
spiffy photos click the other little arrow on the right side and click "Pastels."
Click OK.
Tutorial
open your picture and make sure it's light. it turns out better
Pick the gradient "Green, Yellow, Orange." Check the
that way.
"Reverse" box.
here's mine:
Your picture should look like this:
go to image>adjustments>gradient map.
click the little arrow on the right side next to the gradient. then Go to edit>fade gradient map and set it to hard light. Mine is
李流-ちゃん☺
at 74% opacity, but do whatever looks best. choose "Simple" this time.
Here's mine: Pick the "Purple." Check the "Reverse" box.
Edit>fade gradient map to darken.
Now back to the gradient map thing, click the arrows and
Tutorial
First, make a new document about 400x140 pixels. And press
reset your foreground and background to the original colors
Go to (filter>stylize>glowing edges) and change your settings
(D).
to edge width=1, edge brightness=15, smoothness=1.
李流-ちゃん☺
And in the second frame, put the top layer back to its original
spot, and move the other layer to the bottom of the page, so
you can't see it anymore.
That's the end of Photoshop..
(Remember to keep the lines straight but holding Shift while
Now, jump to ImageReady.
you move it)
Highlight the top layer and click on the move tool (V). Hold
Now, press the Tween button, and add default settings.
shift and move your layer all the way UP, so that you can't
see it anymore.
李流-ちゃん☺