Beruflich Dokumente
Kultur Dokumente
INSTRUCTION MANUAL
SCORER
CHAMPION
CYCLONE
WHIRLWIND
STORM
F5
PLOT
HOLE
SCREW
WASHER & NUT
LEG
Diagram #1
1
OUTSIDE OF
TABLE
BUMPER
YELLOW 3
MAN ROD
YELLOW 5
MAN ROD
YELLOW 2
MAN ROD
BLACK GOALIE
MAN ROD
(SHORTEST
3 MAN ROD)
YELLOW GOALIE
MAN ROD
(SHORTEST
3 MAN ROD)
BLACK 2
MAN ROD
BLACK 5
MAN ROD
SCORE ASSEMBLY
BLACK 3
MAN ROD
BUMPER
SCORING
ASSEMBLY
ROD
Diagram #3
PLASTIC
PLAYER
Diagram #4
BUMPER
HOLES
TO FACE
THE
OUTSIDE
OF THE
GAME.
Diagram #5
9. To remove the men, place the pointed end of the included roll pin punch into the rol pin and
drive it out. The roll pins are reusable.
10. See Diagram #2.
Mount the score assemblies at each end of the table.
11. See Diagram #6.
Level the table with shims provided by placing a shim under the necessary leg. The shims
are designed to fit into the leg boots which then slide over the bottom of each leg or screw
in or out the leg levelers.
12. Lubricate the game at least once a month. In order to lubricate, first wipe each rod with a
clean dry cloth. Second, pull the handle end of each rod out towards you and apply one drop
of silicone to the top of the rod, approximately one inch from the outside of the game.
Continuously spin the rod while pushing it in and pulling it out of the game. Finally, remove
any excess silicone with a clean soft cloth.
LEG
LEG
LEG SHIM
LEG LEVELER
LEG BOOT
Diagram #6
4