Beruflich Dokumente
Kultur Dokumente
Lubricants
177.02.01
Excerpt from the Oerlikon Leybold Vacuum Full Line Catalog
Product Chapter C20
Edition June 2011
Contents
General
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.03
LEYBONOL Lubricant Classifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.04
Vacuum Pump Oils. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.05
Oil Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.05
Diffusion Pump Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.07
Greases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.08
General Information and Recommendations for Oils. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.08
Storage of LEYBONOL Oils and Greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.11
Products
LEYBONOL LVO 1XX Mineral Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.12
LEYBONOL LVO 2XX Ester Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.16
LEYBONOL LVO 3XX PAO Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.19
LEYBONOL LVO 4XX PFPE Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.20
LEYBONOL LVO 5XX Diffusion Pump Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.22
LEYBONOL LVO 6XX White Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.23
LEYBONOL LVO 7XX Special Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.24
LEYBONOL LVO 8XX Greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.26
Miscellaneous
LEYBONOL LVO 9XX Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.30
Oil Analyses for Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.30
Application Assessment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.32
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.33
LEYBONOL Oil analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.35
ISO Viscosity Grades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C20.36
C20 02
General
Long Lifetime
Vacuum suitable additives
protect your pump and
extend its life expectancy.
LEYBONOL allows long
oil change intervals helping
to substantially reduce your
maintenance costs.
Qualityrformance
5 Star t vacuum pe
llen
- exce fetime
n
li
- long or lubricatio ontrols
ri
- supe sive quality c ndards
n
s
te
y
x
str ta
-e
st indu
- highe
Superior Lubrication
LEYBONOL reduces wear and tear caused by friction. Its
superior lubrication properties reduce overall power consumption while also allowing for easy start ups.
03 C20
1XX
2XX
3XX
4XX
5XX
6XX
7XX
8XX
9XX
=
=
=
=
=
=
=
=
=
Mineral oil
Ester oil
PAO oil (Polyalfaolefins)
PFPE oil (Perfluoropolyether)
Diffusion pump oil
White oil
Special lubricants
Greases
Services/analyses
L 1 00 05
Packaging unit in liters (example: 5 liters)
Serial number for the oil type
Classification number (example: mineral oil)
L 8 1 0 05
Packaging unit in g (example: 50 g)
Serial number for the grease type
Base material (example: mineral oil)
Classification number (example: grease)
C20 04
Oil Types
Mineral Oils
(LEYBONOL LVO 1XX)
Mineral oils are products distilled and
refined from crude oil. These do not
consist of precisely defined constituents but rather consist of a complex mixture. The way in which the
mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for. Depending on
the distribution of the hydrocarbons
and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and
aromatic. For the purpose of attaining
especially low ultimate pressures,
mineral oils must be selected on the
basis of a core fraction.
White Oils
(LEYBONOL LVO 6XX)
The thermal and chemical resistance
of mineral oils has been found to be
adequate in the majority of applications. They offer a high degree of
compatibility with elastomers and
resistance to hydrolysis.
Mineral oils also include the group of
hydrocracked oils. These are frequently
also termed semi-synthetic oils. Hydrocracked oils are produced under a
very high hydrogen pressure at high
temperature and are substantially free
of aromatic compounds and olefins.
05 C20
Synthetic Oils
Synthetic oils are produced through
chemical reactions. The group of
synthetic oils includes liquids differing
widely as to their chemical structure
and composition. Correspondingly,
their physical and chemical properties
differ considerably. Synthetic oils are
used in those cases where special
properties of the oil are required which
can not be fulfilled by mineral oils.
Ester Oils
(LEYBONOL LVO 2XX)
Ester oils are organic compounds
which excel especially through their
high thermal resistance to cracking
compared to mineral oils. Chemical
resistance is generally quite good, but
will depend on the type of ester oil.
Elastomer compatibility and resistance
against hydrolysis are not so good
compared to mineral oils.
They should not be used when pumping acids, halogens or alkaline media
like ammonia in connection with humidity.
Polyalfaolefins (PAO)
(LEYBONOL LVO 3XX)
Polyalphaolefin oils are synthetic hydrocarbons which are paraffin like, but
have a uniform structure. Thermal and
chemical resistance is better compared
to mineral oils.
Owing to their good flowing properties
when cold they can be used at low
temperatures.
Elastomer compatibility and resistance
against hydrolysis are comparable to
mineral oils.
Perfluoropolyether (PFPE)
(LEYBONOL LVO 4XX)
These are oils which are only composed of carbon (C), fluorine (F) and
oxygen (O) atoms. The existing
C-O and C-F bonds are highly stable.
For this reason PFPE oils are practically inert against all chemical and
oxidising influences.
Perfluoropolyethers will not polymerise
under the influence of high energy
radiation.
Perfluoropolyethers are used when
pumping strongly oxidative substances
like oxygen, ozone or nitric oxides as
well as highly reactive substances like
halogens and hydrogen halides. Regarding Lewis acids (for example, boron
trifluoride BF3, aluminium trichloride
AlCl3) they are not completely inert.
Here reactions may take place at temperatures over approximately 150 C.
C20 06
Mineral oils
(LEYBONOL LVO 5XX)
Mineral oils for diffusion pumps are
closely toleranced fractions of a high
quality base product distilled with
particular care.
07 C20
Greases
(LEYBONOL LVO 8XX)
Greases are solid to semi-solid substances which consist of the principal
components base oil and thickener.
The base oil provides most of the lubrication and will in most cases define
the service temperature. The thickener
binds the oil and can increase the
lubricity or the thermal stability of the
grease.
Added to these two constituences are
additives which may improve the per-
Cooling
Sealing
Lubrication
Oil is used as a lubricant helping to
reduce friction and provide a protective
film against mechanical wear.
For example, the vanes of a vacuum
pump are forced by the centrifugal
force against the pump ring at a force
of several Newtons. The oil protects
the vanes against friction since they
slide along on the oil film. When viewing a running pump from the inside
using stroboscopic light it is apparent
how an oil wave builds up in front of
the vanes, pressing the vanes away
from the pump ring. The vanes never
touch the pump ring or the bearing
covers allowing the pump to operate
for 10,000s of hours.
C20 08
Means of transport
(dispersing properties of oils)
As a means of transport the oil
absorbs process substances or other
particles keeping them suspended
(dispersed). In this way pump sections
are protected against suffering damage. Sludge deposits and oil thickening
shall be avoided.
Corrosion Protection
The oil shall protect the inner pump
surfaces against corrosion. Corrosion
can occur when the pump is used to
pump water vapour or other chemical
vapours which condense. The oil wets
and protects the inner pump surfaces
helping to keep condensate away from
these. The oil acts as a corrosion
inhibitor.
Applies only to a lesser extent to PFPE
(LVO 4XX).
Oil Check
Oil Lifetime
Oil lifetime is dependent on a number
of parameters.
An important influencing factor is that
of the temperature. Mineral oils are
commonly specified for a maximum
temperature limit of 80 C. Above this
temperature, to put it simply, it can be
said that a temperature increase by
10 C will cut oil lifetime in half. This
results in thickening of the oil.
Synthetic oils may depending on the
type be operated constantly at 100 to
160 C. PFPE oils can be operated
constantly at a temperature of 250 C
max., however, lower maximum
temperatures need to be taken into
account depending on the process
medium.
PFPE oils are not subject to any typical
oil ageing since they are almost inert
(for this see also the section Oil Types
for Forevacuum Pumps, paragraph
Perfluoropolyethers PFPE).
When operating a pump under conditions which are too cold, then water
vapour or other vapours may condense. The condensed liquid may then
cause a loss of the lubricating properties or cause corrosion within the
pump.
09 C20
Oil Cleaning
Oxygen Applications
These include:
- Mechanical oil filters for depositing
dust, crystalline decomposition
products and sludge
- Chemical oil filters for separating
substances dissolved in the oil by
way of adsorption to activated
aluminium oxide
- Various separators for the intake
side for avoiding the ingress of
process media into the pump
Please contact us.
Our experts shall be pleased to assist
you in the selection process for
suitable accessories.
Details on the respective pump
accessories and additional information
can also be found in the corresponding
catalogue section.
C20 10
LEYBONOL Oils
LEYBONOL Greases
Restrictions
For sealed original containers: if the
product is not stored properly, durability is reduced.
After the containers have been
opened:
Adequate precautions against the ingress of dust, dirt, water etc. need to
be introduced and the contents must
be used up speedily. After having
opened the containers once, durability
of the product is reduced.
11 C20
Products
LEYBONOL Mineral Oils
Application Data
LVO 100
LVO 110
Type of oil
Properties
Pumping of air,
chemically inert gases and water vapour
Pumping of air or
chemically inert gases
Suited
Conditionally suited
Unsuitable
Suited
Conditionally suited
Unsuitable
SOGEVAC (
SV 65 A and SV 65 BI (FC))
Technical Data
LVO 100
LVO 110
ISO VG 100
ISO VG 32
95
10.5
32
5.5
Application examples
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Used in the pumps of series
Viscosity
at 040 C
at 100 C
mm2/s
mm2/s
> 255
238
kg/m3
880
841
< -9
-33
LVO 100
LVO 110
Part No.
Part No.
001 liter
L 100 01
L 110 01
002 liters
L 110 02
005 liters
L 100 05
020 liters
L 100 20
208 liters
L 100 99
Flash point
Density at 15 C
Pour point
Ordering Information
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
C20 12
Application Data
LVO 120
Mineral oil with additives
Type of oil
Properties
Application examples
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 2)
EPDM
Used in the pumps of series
Technical Data
Viscosity
at0 40 C
at 100 C
Pumping of air,
chemically inert gases and water vapour
Pumping of air,
chemically inert gases and water vapour
Suited
Conditionally suited
Unsuitable
Suited
Conditionally suited
Unsuitable
SOGEVAC
A-series (
SV 65) and
B-series (
SV 25, SV 65 BI (FC))
SOGEVAC
A-series (
SV 100) and
B-series (
SV 40 B)
LVO 120
LVO 130
ISO VG 32
LVO 130
ISO VG 68
mm2/s
mm2/s
32
5.5
68
9
244
248
kg/m3
875
885
-27
-21
LVO 120
LVO 130
Part No.
Part No.
0.5 litres
L 120 00
001 litre
L 120 01
L 130 01
002 litres
L 120 02
L 130 02
005 litres
L 120 05
L 130 05
020 litres
L 120 20
L 130 20
208 litres
L 130 99
Flash point
Density at 15 C
Pour point
Ordering Information
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
2)
LVO 120 is suited for the SOGEVAC SV 25 B and smaller pumps where the lower viscosity assists the starting process.
LVO 130 is suited for the SOGEVAC SV 40 B and larger pumps where the higher viscosity assists attaining of lower pressures.
However, all SOGEVAC pumps can be operated with both types of oil and moreover, LVO 120 and LVO 130 can be mixed with each other.
Resistance is dependent on the level of the acrylonitrile content in the NBR.
13 C20
Application Data
LVO 140
LVO 150
Type of oil
Properties
H1 registration by NSF.
Constituents approved by the FDA
under CFR 178.3570.
In acc. with USDA-H1
H1 registration by NSF.
Constituents approved by the FDA
under CFR 178.3570.
In acc. with USDA-H1
Suited
Conditionally suited
Unsuitable
Suited
Conditionally suited
Unsuitable
SOGEVAC
A-series (
SV 65) and
B-series (
SV 25, SV 65 BI (FC))
SOGEVAC
A-series (
SV 100) and
B-series (
SV 40 B)
Technical Data
LVO 140
LVO 150
ISO VG 32
ISO VG 68
mm2/s
mm2/s
30
5
63
8
225
253
kg/m3
860
870
-18
-18
LVO 140
LVO 150
Part No.
Part No.
01 liter
L 140 01
L 150 01
20 liters
L 150 20
Application examples
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Used in the pumps of series
Viscosity
at 040 C
at 100 C
Flash point
Density at 15 C
Pour point
Ordering Information
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
C20 14
Application Data
LVO 160
Type of oil
Properties
Application examples
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Suited
Conditionally suited
Unsuitable
SOGEVAC
A-series (
SV 100) and
B-series (
SV 40 B)
Technical Data
LVO 160
ISO VG 68
Viscosity
at 040 C
at 100 C
mm2/s
mm2/s
68
9
254
kg/m3
862
-30
Flash point
Density at 15 C
Pour point
Ordering Information
LVO 160
Part No.
20 liters
L 160 20
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
15 C20
LVO 200
LVO 210
Type of oil
Properties
Application examples
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Used in the pumps of series
Suited
Conditionally suited
Unsuitable
Suited
Conditionally suited
Unsuitable
SOGEVAC
TRIVAC B, SCREWLINE,
E + DK, RUVAC, DRYVAC
SOGEVAC (
SV 100, SV 40 B)
SV 40 Kat. 1 (i)/2 (o) IIB + H2 and
SV 40 B to 630 B
Kat. 2 (i)/2 (o) and 3 (i)/3 (o)
A-series (
SV 65 A) and
B-series (
SV 65 BI (FC)
Technical Data
LVO 200
LVO 210
ISO VG 32
ISO VG 100
mm2/s
mm2/s
28
5.5
97
9
258
250
kg/m3
918
960
< -45
-33
LVO 200
LVO 210
Part No.
Part No.
001 liter
L 200 01
L 210 01
005 liters
L 200 05
L 210 05
020 liters
L 200 20
L 210 20
208 liters
L 210 99
Viscosity
at 040 C
at 100 C
Flash point
Density at 15 C
Pour point
Ordering Information
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
C20 16
Application Data
LVO 220
Synthetic oil (ester oil with additives)
Type of oil
Properties
Application examples
LVO 240
Synthetic oil (special ester oil)
Excellent solubility for polymers
Remarks
Suited
Conditionally suited
Unsuitable
Suited
Unsuitable
Unsuitable
RUVAC (WSLF)
TRIVAC B
Technical Data
LVO 220
LVO 240
ISO VG 100
Not classified
Viscosity
at0 40 C
at 100 C
mm2/s
mm2/s
94
13
38
5
265
225
kg/m3
915
1055 2)
-35
-32
Flash point
Density at 15 C
Pour point
Ordering Information
LVO 220
Part No.
Part No.
01 liter
L 220 01
20 liters
L 240 20
LVO 240
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
2)
17 C20
Application Data
LVO 250
LVO 260
Type of oil
Properties
Application examples
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Suited
Conditionally suited
Unsuitable
Suited
Conditionally suited
Unsuitable
TURBOSTREAM
TURBOSTREAM
Technical Data
LVO 250
LVO 260
No rating
No rating
13
3.5
24
5
> 185
245
925
980 2)
< -57
-60
LVO 250
LVO 260
Part No.
Part No.
0.3 liter
L 250 00
L 260 00
005 liters
L 260 05
896 101
896 112
Viscosity
at0 40 C
at 100 C
mm2/s
mm2/s
Flash point
Density at 15 C
Pour point
Ordering Information
300 ml Set
(for TURBOSTREAM D 2500)
C
kg/m3
C
600 ml Set
(for TURBOSTREAM D 2500 / S 3500)
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
2)
C20 18
LVO 300
LVO 310
Type of oil
Properties
H1 registration by NSF.
Constituents approved by the FDA
under CFR 178-3570.
In acc. with USDA - H1
Recommended for applications in the
food industry
Application examples
Cleaning systems
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Suited
Conditionally suited
Unsuitable
Suited
Conditionally suited
Unsuitable
TRIVAC, SOGEVAC
TRIVAC
LVO 300
LVO 310
Technical Data
ISO VG 100
mm2/s
mm2/s
99
13.5
29
5.5
270
230
kg/m3
840
820
-54
< -54
LVO 300
LVO 310
Flash point
Density at 15 C
ISO VG 32
Pour point
Ordering Information
Part No.
Part No.
01 liter
L 300 01
L 310 01
20 liters
L 300 20
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
19 C20
LVO 410
Type of oil
Properties
Chemically inert
Chemically inert
Application Data
Application examples
Remarks
Suited
Suited
Suited
Suited
Suited
Suited
Technical Data
LVO 400
LVO 410
Not classified
Not classified
Viscosity
at0 40 C
at 100 C
Flash point
Density at 20 C
Pour point
Ordering Information
mm2/s
mm2/s
49
7
89
11
2)
2)
1890
1900
-45
-35
kg/m3
C
LVO 400
Part No.
LVO 410
Part No.
0.60 liter
L 410 00
0.75 liter
L 400 00
0001 liter
L 400 01
L 410 01
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
2)
C20 20
LVO 420
Application Data
Type of oil
Properties
Chemically inert
Highest thermal stability
Pumping of strong oxidants
like oxygen, ozone or nitrous oxides,
as well as reactive substances like halogens,
hydrogen halides and conditionally Lewis acids
Application examples
Remarks
Suited
Suited
Suited
SOGEVAC
Technical Data
LVO 420
Not classified
Viscosity
at0 40 C
at 100 C
mm2/s
mm2/s
25
4.5
2)
Flash point
Density at 20 C
kg/m3
Pour point
Ordering Information
1880
-50
LVO 420
Part No.
1 liter
L 420 01
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
2)
21 C20
LVO 500
(DIFFELEN normal)
LVO 510
Type of oil
Properties
Suited
Conditionally suited
Unsuitable
Suited
Conditionally suited
Unsuitable
Application examples
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Used in the pumps of series
Technical Data
LVO 500
LVO 510
(DIFFELEN normal)
Vapour pressure at 20 C
Viscosity at 40 C
Flash point
Density at 20 C
Technical Data
mbar
4 10-9
4 10-8
100
60
> 250
> 230
868
850
mm2/s
C
kg/m3
LVO 500
(DIFFELEN normal)
LVO 510
Part No.
Part No.
01 liter
L 500 01
L 510 01
05 liters
L 500 05
L 510 05
20 liters
L 500 20
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
C20 22
LVO 600
Type of oil
White oil
Properties
Application examples
Remarks
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Suited
Conditionally suited
Unsuitable
TRIVAC
Technical Data
LVO 600
Not classified
Viscosity
at0 40 C
at 100 C
mm2/s
mm2/s
Flash point
Density at 25 C
54
8
> 220
C
kg/m3
870
< -9
Pour point
Ordering Information
LVO 600
Part No.
01 liter
L 600 01
05 liters
L 600 05
20 liters
L 600 20
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
23 C20
DOT 4
Type of oil
Brake fluid
Properties
Application examples
Remarks
Conditionally suited
TRIVAC, SOGEVAC
Unsuitable
Unsuitable
Technical Data
DOT 4
Not classified
Viscosity
at0 40 C
at 100 C
Flash point
Density at 15 C
Pour point
mm2/s
mm2/s
N/A
> 1.5
> 120
kg/m3
1070
< -50
Ordering Information
DOT 4
Part No.
1 liter
200 10 037
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
Not all EPDM materials are suited for contact with DOT 4
C20 24
Notes
25 C20
LEYBONOL Greases
Application Data
LVO 810
(LITHELEN)
LVO 830
Mineral oil
Thickener
Lithium soap
Calcium/polyurea
Properties
Application examples
Remarks
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Technical Data
Suited
Conditionally suited
Unsuitable
Suited
Conditionally suited
Unsuitable
LVO 810
LVO 830
(LITHELEN)
Vapour pressure at 20 C
mbar
10-10
3 10-6
Dropping point
> 210
> 220
150
140
LVO 810
(LITHELEN)
LVO 830
Part No.
Part No.
Tube 50 g
L 810 05
Tin 100 g
L 830 10
Ordering Information
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
Notice:
Please note that the LEYBONOL greases and the new part numbers will only be available from mid-2011.
C20 26
Application Data
LVO 840
LVO 870
PFPE
Thickener
PTFE
Natural rubber
Properties
Application examples
Lubrication of O-rings
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Technical Data
Vapour pressure at 20 C
mbar
Suited
Suited
Suited
Suited
Conditionally suited
Unsuitable
LVO 840
LVO 870
3 10-8
10-4
Dropping point
Not applicable
> 50
200
30
LVO 840
LVO 870
Ordering Information
Part No.
Tin
050 g
Tube 100 g
L 840 10
L 870 05
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
Notice:
Please note that the LEYBONOL greases and the new part numbers will only be available from mid-2011.
27 C20
Application Data
LVO 871
LVO 872
Thickener
Natural rubber
Natural rubber
Properties
Application examples
Lubrication of cocks
Suited
Conditionally suited
Unsuitable
Suited
Conditionally suited
Unsuitable
LVO 871
LVO 872
mbar
10-4
10-4
Dropping point
> 56
> 56
30
30
LVO 871
LVO 872
Part No.
Part No.
L 871 05
L 872 05
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Technical Data
Vapour pressure at 20 C
Ordering Information
Tin 50 g
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
Notice:
Please note that the LEYBONOL greases and the new part numbers will only be available from mid-2011.
C20 28
Application Data
LVO 873
Silicone oil
Silicone oil
Thickener
N/A
Inorganic
Properties
Application examples
Suited
Suited
Suited
Suited
Suited
Suited
LVO 873
N/A
10-7
Remarks
Elastomer compatibility
FKM (FPM, Viton)
NBR (Perbunan) 1)
EPDM
Technical Data
Vapour pressure at 20 C
mbar
Dropping point
None 2)
None 2)
200
200
LVO 873
Part No.
Part No.
Tube 050 g
E 210 502
Tube 100 g
L 873 10
Ordering Information
Please note that the technical data stated are typical characteristics only. Slight variations from batch to batch must be expected.
The technical data stated here do not entail any warranted characteristics.
1)
2)
Notice:
Please note that the LEYBONOL greases and the new part numbers will only be available from mid-2011.
29 C20
Miscellaneous
Services
We are offering a number of different
services under the product designation
LEYBONOL LVO 9XX.
Application Data
Performance scope
Remark
Ordering Information
Measurement of viscosity
TAN (ageing)
Wearing metals and additives in ppm
Water in %
Simple infrared measurement
Not applicable to PFPE oils
C20 30
L 900 01
Application Data
Performance scope
Remark
Ordering Information
Measurement of viscosity
TAN (ageing)
Wearing metals and additives in ppm
Water in %
Simple infrared measurement
Optical particle analysis and particle count
Not applicable to PFPE oils
L 900 02
31 C20
Application Assessment
Application Assessment, Standard
You send to us the results of the analysis by our partner OELCHECK and complete the information on the laboratory order
supplement. We will then compare this information with the information contained in our application database.
Thereafter you will receive a condition report and recommendations on how to handle and optimally use this type of oil in the
desired process.
Ordering Information
LVO 900
Application Assessment, Standard
Part No.
ASL 900 03
Ordering Information
LVO 900
Trend Analysis
Part No.
Trend Analysis
ASL 900 04
C20 32
Glossary
Additives
Additives are oil soluble substances
which can be added in low concentrations to the lubricants so as to improve certain properties. Frequently
additives serve the purpose of improving, respectively avoiding oxidation,
wear, corrosion, fluidity and foaming.
Not all additives are suited for vacuum
applications. Some additives exhibit a
high vapour pressure thereby having a
negative influence on the attainable
ultimate pressure.
BAM
Some products from the LEYBONOL
line have been registered at the Bun
desanstalt fr Materialforschung und
-prfung. (I.e. the Federal Institute for
Materials Research and Testing in Ger
many.)
CFR (Code of Federal Regulations)
in the USA.
Colour
For this refer to Visual appearance.
Density
The density of a substance is defined
as the ratio between its mass and its
volume at a certain temperature. It
depends on the chemical composition
of a product.
International unit of measurement:
kg/m3.
Dropping point
The dropping point designates the
temperature at which a lubricating
grease begins to flow.
Elastomers
Elastomers are cross-linked polymers
capable of reversibly absorbing significant deformations. Elastomers are
used as the sealing material for shaft
sealing rings or O-rings, for example.
33 C20
Odour
Lubricants when new exhibit a mild
odour. Mineral oils will usually develop
a more intensive odour compared to
synthetic oils. Contamination with
foreign substances or lubricant reactions can cause a significant odour
change.
Oil ageing
Common lubricants cannot be used for
an unlimited time. Lubricants worsen
during use, i.e. they age. This ageing is
caused, among other things, by temperature, oxidation, chemical and physical reactions with process media.
This can result in the formation of
sludge, resins or acids (for this see
also Section General information and
Recommendations for Oils, paragraph
Oil check)
Pour point
The pour point is the lowest temperature at which oil is still capable of flowing.
RoHS (Restriction of (the use of
certain) hazardous substances)
Directive on the Restriction of the use
of certain Hazardous Substances in
electrical and electronic equipment
TAN
The designation TAN (Total Acid Number) is frequently used instead of the
designation neutralisation number.
For details see Neutralisation
number.
Thickener
A thickener binds the oil in the lubricating grease and may increase lubricity
or thermal stability of the grease.
Thickeners are roughly categorised in
soap thickeners like lithium and nonsoap thickeners like polyurea or PTFE.
Vapour pressure
The vapour pressure is the ambient
pressure below which a liquid begins
to change in to the gaseous state with
the temperature being constant.
Viscosity
Viscosity is a measure of the amount
of inner friction within a fluid. The
development of hydrodynamically
supporting films of oil, optimum oil
conveying, sealing and lubricating and
also the supply of heat require optimum viscosities. These need to be
within certain ranges depending on the
specific purpose of the application.
Viscosity is much temperature dependent. At increasing temperatures viscosity reduces, i.e. the lubricant substance is less viscous.
When the oil is too thick at operating
temperature it will no longer flow
through the oil lines resulting in inadequate lubrication thereby causing
damage. The result is a rapid increase
in wear and an impaired ultimate
pressure.
During operation the viscosity may
change owing to:
- Lubricant ageing
- Ingress of foreign substances
- Reaction of the lubricant substance
with the process media
a) Dynamic viscosity
The Newtonian definition of viscosity
relates to the true viscosity. It is also
termed dynamic viscosity.
International unit of measurement:
mPas
This value corresponds to the former
unit of measurement: cP
b) Kinematic viscosity
The ratio between dynamic viscosity
and density is defined as kinematic
viscosity. Generally kinematic viscosity
is measured at 40 C and 100 C.
International unit of measurement:
mm2/s.
This value corresponds to the former
unit of measurement: cSt.
Visual appearance
The visual appearance of the lubricant
should be clear and clean. The colour
of the new lubricant substances will
normally range from colourless to
amber. Changes in colour and turbidity
can be indicative of a contamination
with foreign substances or oxidation.
Turbidity, for example, may indicate the
presence of water. However, the colour
alone is not conclusive as to the
condition of the lubricant.
VOC
Volatile Organic Compound.
Water
A high water content can impair the
lubricity of the lubricant being used
and may have a negative influence on
the attainable ultimate pressure.
Should the oil/water emulsion remain in
the pump then this can lead to
corrosion.
Wearing metals
Wearing materials like iron, aluminium
copper can be detected by measurements. Wearing metals present in the
oil allow conclusions as to abrasive or
corrosive wear.
USDA
United States Department of Agriculture (in charge of food safety among
other things).
C20 34
Customer
Company*
Name*
Street address/number*
Postal code/city
Phone*
E-mail*
Oil sample
Oil designation*
Oil manufacturer or supplier*
Used in pump type/size*
Total oil sample operating hours*
Total pump operating hours
Oil change interval
Oil temperature
Pump accessories*
Application*
Process media*
Reason/problem/aim
of the investigation*
Oerlikon
Leybold Vacuum GmbH
Bonner Strasse 498
D-50968 Cologne
Tel.: +49-221-347 0
Fax: +49-221-347 1250
Oerlikon Leybold Vacuum Full Line Catalogue
www.oerlikon.com/
leyboldvacuum
35 C20
Table 1
ISO viscosity grade
ISO VG 2
2.2
1.98 / 2.42
ISO VG 3
3.2
2.88 / 3.52
ISO VG 5
4.6
4.14 / 5.06
ISO VG 7
6.8
6.12 / 7.48
ISO VG 10
10
9.00 / 11.0
ISO VG 15
15
13.5 / 16.5
ISO VG 22
22
19.8 / 24.2
ISO VG 32
32
28.8 / 35.2
ISO VG 46
46
41.4 / 50.6
ISO VG 68
68
61.2 / 74.8
ISO VG 100
100
90.0 / 110
ISO VG 150
150
135 / 165
ISO VG 220
220
198 / 242
ISO VG 320
320
288 / 352
ISO VG 460
460
414 / 506
C20 36
Notes
37 C20
Europe
Oerlikon
Leybold Vacuum GmbH
Bonner Strasse 498
D-50968 Cologne
Phone: +49-(0)221-347 1234
Fax: +49-(0)221-347 1245
sales.vacuum@oerlikon.com
www.oerlikon.com
Belgium
Oerlikon
Leybold Vacuum Nederland B.V.
Belgisch bijkantoor
Leuvensesteenweg 542-9A
B-1930 Zaventem
Sales:
Phone: +32-2-711 00 83
Fax: +32-2-720 83 38
sales.vacuum.zv@oerlikon.com
Service:
Phone: +32-2-711 00 82
Fax: +32-2-720 83 38
service.vacuum.zv@oerlikon.com
Oerlikon
Leybold Vacuum GmbH
Sales Area North/Northeast
Branch Office Berlin
Industriestrasse 10b
D-12099 Berlin
Phone: +49-(0)30-435 609 0
Fax: +49-(0)30-435 609 10
sales.vacuum.bn@oerlikon.com
Oerlikon
Leybold Vacuum GmbH
Sales Area South/Southwest
Branch Office Munich
Karl-Hammerschmidt-Strasse 34
D-85609 Aschheim-Dornach
Phone: +49-(0)89-357 33 9-10
Fax: +49-(0)89-357 33 9-33
sales.vacuum.mn@oerlikon.com
service.vacuum.mn@oerlikon.com
Oerlikon
Leybold Vacuum GmbH
Sales Area West & Benelux
Branch Office Cologne
Bonner Strasse 498
D-50968 Cologne
Phone: +49-(0)221-347 1270
Fax: +49-(0)221-347 1291
sales.vacuum.kn@oerlikon.com
Oerlikon
Leybold Vacuum GmbH
Service Competence Center
Emil-Hoffmann-Strasse 43
D-50996 Cologne-Suerth
Phone: +49-(0)221-347 1538
Fax: +49-(0)221-347 1945
service.vacuum.kn@oerlikon.com
Oerlikon
Leybold Vacuum GmbH
Mobil Customer Service
Emil-Hoffmann-Strasse 43
D-50996 Cologne-Suerth
Phone: +49-(0)221-347 2001
Fax: +49-(0)221-347 1944
service.vacuum.kn@oerlikon.com
LV_11047_2011
07.11
Oerlikon
Leybold Vacuum
Dresden GmbH
Service Competence Center
Zur Wetterwarte 50, Haus 304
D-01109 Dresden
Service:
Phone: +49-(0)351-88 55 00
Fax: +49-(0)351-88 55 041
info.vacuum.dr@oerlikon.com
France
Oerlikon
Leybold Vacuum France S.A.
7, Avenue du Qubec
Z.A. de Courtaboeuf 1 - B.P. 42
F-91942 Courtaboeuf Cedex
Sales and Service:
Phone: +33-1-69 82 48 00
Fax: +33-1-69 07 57 38
info.vacuum.ctb@oerlikon.com
sales.vacuum.ctb@oerlikon.com
Oerlikon
Leybold Vacuum France S.A.
Valence Factory
640, Rue A. Bergs
B.P. 107 640
F-26501 Bourg-ls-Valence Cedex
Service:
Phone: +33-4-75 82 33 00
Fax: +33-4-75 82 92 69
marketing.vacuum.vc@oerlikon.com
Great Britain
Oerlikon
Leybold Vacuum UK LTD.
Silverglade Business Park
Leatherhead Road Unit 2
KT9 2QL Chessington, Surrey
(London)
Sales:
Phone: +44-13-7273 7300
Fax: +44-13-7273 7301
sales.vacuum.ln@oerlikon.com
Service:
Phone: +44-20-8971 7030
Fax: +44-20-8971 7003
service.vacuum.ln@oerlikon.com
Italy
Oerlikon
Leybold Vacuum Italia S.r.l.
Via Trasimeno 8
I-20128 Milano
Sales:
Phone: +39-02-27 22 31
Fax: +39-02-27 20 96 41
sales.vacuum.mi@oerlikon.com
Service:
Phone: +39-02-27 22 31
Fax: +39-02-27 22 32 17
service.vacuum.mi@oerlikon.com
Asia
Netherlands
Oerlikon
Leybold Vacuum Nederland B.V.
Proostwetering 24N
NL-3543 AE Utrecht
Sales and Service:
Phone: +31-(30) 242 6330
Fax: +31-(30) 242 6331
sales.vacuum.ut@oerlikon.com
service.vacuum.ut@oerlikon.com
Spain
Oerlikon
Leybold Vacuum Spain, S.A.
C/ Huelva 7
E-08940 Cornell de Llobregat
(Barcelona)
Sales:
Phone: +34-93-666 43 11
Fax: +34-93-666 43 70
sales.vacuum.ba@oerlikon.com
Service:
Phone: +34-93-666 46 16
Fax: +34-93-685 43 70
service.vacuum.ba@oerlikon.com
Switzerland
Oerlikon
Leybold Vacuum Schweiz AG
Leutschenbachstrasse 55
CH-8050 Zrich
Sales:
Phone: +41-44-308 40 50
Fax: +41-44-302 43 73
sales.vacuum.zh@oerlikon.com
Service:
Phone: +41-44-308 40 62
Fax: +41-44-308 40 60
service.vacuum.zh@oerlikon.com
America
Oerlikon
Leybold Vacuum USA Inc.
5700 Mellon Road
USA-Export, PA 15632
Phone: +1-724-327-5700
Fax: +1-724-325-3577
info.vacuum.ex@oerlikon.com
Sales:
Eastern & Central time zones
Phone: +1-724-327-5700
Fax: +1-724-333-1217
Pacific, Mountain, Alaskan &
Hawaiian time zones
Phone: +1-408-436-2828
Fax: +1-408-436-2849
Service:
Phone: +1-724-327-5700
Fax: +1-724-325-3577
P.R. China
Oerlikon
Leybold Vacuum (Tianjin)
International Trade Co. Ltd.
Beichen Economic
Development Area (BEDA),
No.8 Western Shuangchen Road
Tianjin 300400
China
Sales and Service:
Phone: +86-22-2697 0808
Fax: +86-22-2697 4061
Fax: +86-22-2697 2017
info.vacuum.tj@oerlikon.com
sales.vacuum.tj@oerlikon.com
service.vacuum.tj@oerlikon.com
Oerlikon
Leybold Vacuum
(Tianjin) Co. Ltd.
Beichen Economic
Development Area (BEDA),
No.8 Western Shuangchen Road
Tianjin 300400
China
Sales and Service:
Phone: +86-22-2697 0808
Fax: +86-22-2697 4061
info.vacuum.tj@oerlikon.com
sales.vacuum.tj@oerlikon.com
service.vacuum.tj@oerlikon.com
Oerlikon
Leybold Vacuum (Tianjin)
International Trade Co. Ltd.
Shanghai Branch:
No.33
76 Fu Te Dong San Road
Waigaoqiao Free Trade Zone
Shanghai 200131
China
Sales and Service:
Phone: +86-21-5064-4666
Fax: +86-21-5064-4668
info.vacuum.sh@oerlikon.com
sales.vacuum.sh@oerlikon.com
service.vacuum.sh@oerlikon.com
Oerlikon
Leybold Vacuum (Tianjin)
International Trade Co. Ltd.
Guangzhou Office and
Service Center
1st F, Main Building
Science City Plaza,
No.111 Science Revenue,
Guangzhou Science City
(GZSC) 510663, Guangzhou,
China
Sales:
Phone: +86-20-223 23 980
Fax:+86-20-223 23 990
info.vacuum.gz@oerlikon.com
sales.vacuum.gz@oerlikon.com
service.vacuum.gz@oerlikon.com
Oerlikon
Leybold Vacuum (Tianjin)
International Trade Co. Ltd.
Beijing Branch:
1-908, Beijing Landmark Towers
8 North Dongsanhuan Road
Beijing 100004
China
Sales:
Phone: +86-10-6590-7622
Fax: +86-10-6590-7607
sales.vacuum.bj@oerlikon.com
service.vacuum.bj@oerlikon.com
India
Oerlikon
Leybold Vacuum India Pvt Ltd.
EL 22, J-Block
MIDC Bhosari
Pune 411026
India
Sales and Service:
Phone: +91-20-3061 6000
Fax: +91-20-2712 1571
sales.vacuum.pu@oerlikon.com
service.vacuum.pu@oerlikon.com
Oerlikon
Leybold Vacuum USA Inc.
5700 Mellon Road
USA-Export, PA 15632
Phone: +1-724-327-5700
Fax:
+1-724-325-3577
info.vacuum.ex@oerlikon.com
Oerlikon
Leybold Vacuum GmbH
Bonner Strasse 498
D-50968 Cologne
Phone: +49-(0)221-347 0
Fax:
+49-(0)221-347 1250
info.vacuum@oerlikon.com
Japan
Oerlikon
Leybold Vacuum
Japan Co., Ltd.
Headquarter
23-3, Shin-Yokohama
3-chome
Tobu A.K. Bldg. 4th Floor
Kohoku-ku
Yokohama-shi 222-0033
Sales:
Phone: +81-45-471-3330
Fax: +81-45-471-3323
info.vacuum.yh@oerlikon.com
sales.vacuum.yh@oerlikon.com
Oerlikon
Leybold Vacuum
Japan Co., Ltd.
Osaka Sales Office
3F, Shin-Osaka Terasaki
No.3 Bldg.
1-5-28 Nishi-Miyahara
Yodogawa-ku, Osaka-shi
Osaka 532-0004
Phone: +81-6-6399-6271
Fax: +81-6-6399-6273
info.vacuum.os@oerlikon.com
sales.vacuum.os@oerlikon.com
Oerlikon
Leybold Vacuum
Japan Co., Ltd.
Tsukuba Technical Service Center
Kogyo Danchi
21, Kasuminosato,
Ami-machi, Inashiki-gun
Ibaraki-ken, 300-0315
Service:
Phone: +81-298 89 2841
Fax: +81-298 89 2838
info.vacuum.iik@oerlikon.com
sales.vacuum.iik@oerlikon.com
South Korea
Oerlikon
Leybold Vacuum Korea Ltd.
3F. Jellzone 2 Tower
Jeongja-dong 159-4
Bundang-gu Sungnam-si
Gyeonggi-do
Bundang 463-384, Korea
Sales:
Phone: +82-31 785 1367
Fax: +82-31 785 1359
sales.vacuum.bd@oerlikon.com
Service:
623-7, Upsung-Dong
Cheonan-Si
Chungcheongnam-Do
Korea 330-290
Phone: +82-41 589 3035
Fax: +82-41 588 0166
service.vacuum.cn@oerlikon.com
Singapore
Oerlikon
Leybold Vacuum
Singapore Pte Ltd.
1 Science Park Road
Singapore Science Park 2
#02-12, Capricorn Building
Singapore 117528
Sales and Service:
Phone: +65-6303 7030
Fax: +65-6773 0039
sales.vacuum.sg@oerlikon.com
service.vacuum.sg@oerlikon.com
Taiwan
Oerlikon
Leybold Vacuum Taiwan Ltd.
No 416-1, Sec. 3
Chunghsin Road., Chutung
Hsinchu County 310
Taiwan, R.O.C.
Sales and Service:
Phone: +886-3-500 1688
Fax: +886-3-583 3999
sales.vacuum.hc@oerlikon.com
service.vacuum.hc@oerlikon.com
www.oerlikon.com/
leyboldvacuum