Beruflich Dokumente
Kultur Dokumente
Knuckle Radius
ID < 24" = 1"
ID < 144" = 2"
ID > 144" = 3-1/2"
Straight Flange A
Type
Dish Radius
Standard F&D
100% of ID
Shallow F&D
150% of ID
1"
ASME F&D
90:8 F&D
80:10 F&D
2:1 Elliptical B
100% of ID
90% of ID
80% of ID
Varies
6% of ID (min)
8% of ID (min)
10% of ID (min)
Varies
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1"
DISHED ONLY
Type
Dished only C
Straight Flange
N/A
Stainless Steel and Alloy Fabricators of Storage Tanks, Pressure Vessels, Heat Exchangers, and Tank Components
Head Types
FLANGED ONLY
Type
Flanged only
Type
Reverse
Flanged and
Dished
Stainless Steel and Alloy Fabricators of Storage Tanks, Pressure Vessels, Heat Exchangers, and Tank Components
Head Types
TORICONICAL
Type
Toriconical H
Included
Angle
Varies
Knuckle Radius
Varies
Straight Flange I
1"
H Must specify both large and small ID. Small ID must be greater than 1-3/8
IStraight flange may be dependent on forming max height and may be subject to
minimum 3x nominal thickness
CONICAL
Type
Conical J
Included
Angle
Varies
Knuckle Radius
Varies
Straight Flange
N/A
J Must specify both large and small ID. Small ID must be greater than 1-3/8
Stainless Steel and Alloy Fabricators of Storage Tanks, Pressure Vessels, Heat Exchangers, and Tank Components
Head Types
HEMISPHERICAL
Type
Dish Radius Knuckle Radius
K
Hemispherical 50% of ID N/A
Straight Flange
N/A
K Dollar section not required for non-ASME code heads. Seamless construction is not available for this style of head.
HEAD LAYOUTS
To learn more
Visit our website: www.cmc-letco.com
Call us: (417) 831-1528
Email: sales@cmc-letco.com
Stainless Steel and Alloy Fabricators of Storage Tanks, Pressure Vessels, Heat Exchangers, and Tank Components