Beruflich Dokumente
Kultur Dokumente
PPD, UTHM
DAC31903: STRUCTURAL DESIGN
REINFORCRED CONCRETE DESIGN PROJECT
Discuss between group members whether to design the bridge as simply supported or
continuous construction and the reasons behind the selection.
The distance between the buildings is 12 metres and it is essential that access is
maintained with a clear headroom of 3.5 m and two corridors of width 6.0 m and 4.5 m
respectively.
The new structure is to be considered as a completely separate structure from the two
existing buildings and it may be assumed that all necessary access at the required level of
entry into the buildings is possible. Similarly it may be assumed that footings for the new
structure can be constructed at whatever level and within the confines of the perimeter of
the existing buildings as are necessary.
It is your group task, to prepare the necessary calculations and drawings to enable Tender
Documents to be prepared.
REQUIREMENTS
You are required to prepared the following:
(a) A Structural General Arrangement Drawing using AUTOCAD showing Plan,
Elevation and Sections of your proposed scheme with all necessary dimensions
of beams, columns and slabs etc. clearly indicated.
(b) Design calculations for the Walkway Slab, supporting beams, and one typical
column and one typical pad footing.
(c) Detail Drawings for the above members.
DESIGN INFORMATION
1.
2.
3.
4.
5.
COMMENTS
1.
2.
3.
Initial member sizing calculations need not be submitted but may be asked for
from certain individuals to confirm parts of their work.
There are obviously many possible answer to this project as all important
structural member sizes have been left to you to design. Group individuality
will gain marks.
Choice of materials (i.e. Grade of Concrete or type of steel reinforcement will
be left to your judgement, but must be relevant to EC2 or
BS5950).Calculations should include all engineering decisions make together
with any explanation necessary to make them clear.
SUBMISSION
1.
2.
3.
fck =
fyk =
Member I.D.
DepartDeDepartment of Civil
Eng. PPD
Calculation
Initials
Designed
Checked
REF
.
CALCULATIONS
OUTPUT
Page..of..
CALCULATIONS
REF
OUTPUT