Beruflich Dokumente
Kultur Dokumente
Vapor
Foam
Vapor
Organic
Organic
Water
Deposition
Water
Deposition
Typical response
A TruTec Neutron Backscatter measurement is used to trouble-shoot or optimize on-line processes. It can measure liquid levels, vapor
pockets, fouling, or interfaces between different phases by detecting differences in hydrogen concentration. This system is an extremely
efficient method of verifying liquid levels in pressure vessels, determining froth heights in downcomers, identifying plugs in piping, or sludge
levels inside tanks.
The neutron
measurement can
be used to quickly
identify flow
restrictions in
piping, or vapor
pockets that may
be contributing to
pump problems. Several rubber and polymer plants require
routine neutron surveys of all their relief piping in the plant, to
assure that no dangerous deposits exist that would result in
undesirable back pressures or flow restrictions.
Neutron measurements are very complementary to our
TRU-SCAN technology results. Froth height or level information
Corporate Headquarters:
4106 New West Dr.
Houston, TX 77507 USA
Tel 281 281 7761
Fax 281 291 7709
Toll Free 800 288 8970
www.tracerco.com
tracercotracerco.com
XM0160/0/O/JM1058/968