Beruflich Dokumente
Kultur Dokumente
Name/Tag No/rating
Rema
rks
A
B
A
B
A
B
A
B
A
B
Name/Tag No/Rating
Generators
1-Gas Genset G1&G2
235KW, G3&G4 200KW and
Diesel Genset DG 200KW
2-Jacket water/after cooler
Fan
Motors 380V,5A,2.2KW
3-Exhaust Fan Motors
380V,13.3A,5.5KW
ACB
G1,G2,G3,G4 & DG 1250A
Utility Pump Motor and MCU
P-801,380V,7.8A,4KW
Rema
rks
5N
O
2N
O
2N
O
A
B
A
B
A
B
B
Instrument Air Compressor
K-600,380V,,43KW Make:
Ingersoll Rand
A
B
Name/Tag No/Rating
Power
extension
boards
with
industrial sockets and cable rating
10mm size, extension boards Main
DB having main incoming 63Amps
& out going 32Amps, 16 amps,
10amps industrial sockets male &
female,
24VDC
lighting
arrangement for vessels, 250watt
flood lights for night hours jobsetc.
Will be arranged by contractor.
Rema
rks
1. Contractor should submit Cvs of the man power being hired at least
before 15 days of the job startus.
2. Contractor should submit list of the tools available & ensure its
availability at least 3 days before start-up & an inspection of tools
by OGDCL field professionals be carried out to avoid any short fall.
3. Contractor will be responsible for arranging of Food and proper
accommodation for their manpower and OGDCL will not provide
food and accomodation.
4. Liftig/shifting and movement of equipments like motors, valves from
field area to workshop area and back will be the responsibility of
contractor He should arrage moving trolleys and transport in this
regard to speed up the process.any delay will be unbearable.
5. All consumeables will be provided by OGDCL
Tools to be provded by contracror.
Different Size of screw drivers= 03 each
Open End spanner 6-32mm
= 02 set
Ring spanner set 6-32mm
= 02 set
Pipe wrench different size
= 01 each
Monkey pllier
= 02 nos
Bearing lock opner plier
= 02 Nos
Hammers Brass and Iron 5LB, 8LB. = 02 Nos. each
Chain Block 2.0 ton
= 01 Nos
Lifting Belt 2.0 ton
= 03 Nos
Elan key set 1.5mm to 10mm
=01 set
Elan key set 12mm to 25mm
=01 set
Elan key set 3/8 inch to 1/8 inch
=01 set
Grip plier
=02 Nos
Ratchet set 10mm to 32mm
= 03 Nos
For each ATE and Electrician complete tool kit should be consisting the,
( Star set, Plier, Nose plier, AVO meter, Adjustable 7, Side cutter,
Small Hammer, test pen, cableknif, Permanent marker, Large medium
small size Screw driver set.)
Bearing Puller Small, medium, large = 01 No each
Bearing heater
= 01 No
Chisel set 10mm to 32mm
= 01 No
Air blower
= 02 Nos
Note: Skilled/unskilled Manpower should be equipped with complete safety
gear/PPE,s.
In case of failure of safety measures company will not be responsuble any kind
of damage.