Beruflich Dokumente
Kultur Dokumente
by Companhia Siderrgica
Belgo-Mineira.
0800 15 1221
www.belgo.com.br
Belgo
Drawn
Bars
Belgo produces Drawn Bars from cold-drawn wire rod
used for fabrication of shafts, parts for the mechanical industry,
agricultural and highway implements, forged parts,
fasteners, tools, helical springs, and rods for shock absorbers.
Drawn Bars are supplied in the following specifications:
Carbon Steel SAE 1006 / 1010 / 1015 / 1020 / 1025 / 1035 / 1045
Resulfurized BL 15 / BL 10
Special 1566 / 6150 / 4140
Belgo
Drawn Bars
Bar Length
Available in 4.76-77.20 mm diameter; standard tolerance H11 conforming to ISO standard. For certain diameters and steels, tolerance
H10 and/or H9 may be available to order.
Standard length:
3.00-6.00 m ( up to 1)
5.00-6.50 m (above 1)
Packaging
Length tolerance:
Standard: + 100 mm (alternative: 50 mm)
Packed in round bundles steel strapped over plastic strips and weighing 1.0-2.0 tons depending on the bar diameter.
Certification
Quality Certificate containing chemical analysis
and bar identification data.
Calculated
Weight
mm
kg/m
4.76
0.14
Diameter
Bar Length
Helical spring manufacturers normally use specific
unit lengths. Depending on the application, in
some cases, multiple lengths are specified.
in.
3/16
1/4
5/16
3/8
Straightness
Normal warping specified is 2.0 mm/m.
1/2
Packaging
Packed in bundles steel strapped over polypropylene strips; pack shape is round or hexagonal depending on diameter and length. Weight:
0.8-1.5 tons.
9/16
5/8
Structure
Ferrite and pearlite. Grain size 7 or smaller,
homogeneous.
11/16
3/4
Decarburization
and Surface Defects
Total decarburization not acceptable at any level;
exemption required.
For depth of partial decarburization and surface
defects, specifications normally establish maximum levels equal to 0.8% of the bar diameter.
13/16
7/8
15/16
1
Certification
Quality certificate containing chemical analysis,
dimensions, hardness, microinclusions, decarburization, structure, grain size, and equivalent
carbon.
11/16
11/8
5.50
0.19
6.35
0.25
7.00
0.30
7.94
0.39
8.00
0.39
9.00
0.50
9.52
0.56
10.00
0.61
11.00
11.11
11.30
0.79
12.00
0.89
12.70
0.99
13.00
1.04
14.00
1.21
14.28
1.26
14.50
1.30
Structure
Ferrite and pearlite, lamellar with homogeneous distribution. Grain size 5-8, homogeneous.
0.74
Bar Length
0.76
Decarburization
and Surface Defects
Total decarburization not acceptable at any level;
exemption required.
For depth of partial decarburization and surface
defects the following is specified:
Diameter (mm)
up to 12,80
x 0.01
15.00
1.38
15.88
1.55
12,81 to 20,00
0.12
16.00
1.58
above 20,01
0.15
17.00
1.78
17.46
1.88
18.00
1.99
19.05
2.23
13/16
30.16
5.60
20.00
2.46
11/4
31.75
6.21
20.63
2.62
13/8
34.93
7.52
21.00
2.72
35.00
7.55
22.00
2.98
17/16
36.51
22.22
3.04
11/2
38.10
8.94
23.00
3.26
15/8
41.23
10.47
23.81
3.49
13/4
44.45
12.17
25.00
3.85
17/8
47.63
13.98
25.40
3.97
50.80
15.90
26.00
4.16
2 1/8
53.98
17.95
26.99
4.49
2 1/4
57.15
20.12
28.00
4.83
2 1/2
63.50
24.85
28.58
5.03
2 3/4
69.85
30.06
30.00
5.54
76.20
35.78
Calculated
Diameter
Weight
in.
mm
kg/m
Straightness
Note
Packaging
This line of products also includes
stabilizer bars whose dimensional
specifications are:
14.90-22.90 mm diameter
Tolerance H11
Length tolerance: +3.0 mm
to 0.0 mm
Certification
Chemical Analysis and Physical Test results as
specified by the customer and under any technical
agreement in force. Certificates provided in proper
forms.