Beruflich Dokumente
Kultur Dokumente
49. If a tube cutter is not available and tubing and tubing is of hard material is to be cut use a fine teeth hacksaw
preferably
1. One having 20 teeth per inch
2. One having 28 teeth per inch
3. One having 32 teeth per inch
4. One having 20 or 22 teeth per inch
50. Twisting of the hose can be determined from the identification
1. Plate attached at one end
2. Strip running along its length
3. Deecal put in the center of hose
4. As in 2 and the stripe should not spiral around the hose
51. Alloy steel bolts smaller than