Beruflich Dokumente
Kultur Dokumente
for manufacturers
Memo
Dear Sir/Madam,
Those who go to a carpenter for furniture expect something special.
Blum's goal is to make it easy for you to fulfil the high expectations of your customers and to do so in an economical way. We have
expanded the range of services offered to manufacturers and merged these into one combined portal. This will ensure that you
get the best possible support for cabinet planning and quick and efficient fittings selection and ordering.
This update gives you new product content in DYNAPLAN. You can find an
overview of this on the following page.
Note: Installing the latest update ensures that you are working with the
latest version of the Blum product range.
This will mean that orders cannot be completed correctly by the hardware
distributor.
Product configurator
The online product configurator helps you to locate and order the correct fittings for your furniture quickly and easily.
We also provide assembly drawings, installation instructions and CAD data for every configuration.
Discover more about these new features on the following pages. Please do not hesitate to contact us with any
questions or comments.
We thank you for your trust and confidence, and wish you all the best.
Kind regards,
www.blum.com/contact
Services
for manufacturers
AVENTOS HK-XS
SERVO-DRIVE uno for AVENTOS
CLIP top 125
LEGRABOX sink solution
AMBIA-LINE
TIP-ON BLUMOTION for MOVENTO
With DYNALOG 3.4, you have the option to select a new cabinet design for the bottom panel 'cabinets without a bottom
panel'. This design is mainly used for dish draining closets in wall cabinets and, as it brings another function to the mix,
offers even more scope when it comes planning.
Other services
Additional Blum online services are available with DYNALOG 3.1 or higher.
The following applications are included in this package:
Product configurator
Single product search including CAD data
Shopping basket with optional interfaces to the online shops of hardware distributors
Integrated front weight calculator to help you determine the front weight for specific lift systems and doors.
Services
for manufacturers
AVENTOS HK-XS
The compact fitting for small stay lifts
AVENTOSHK-XS is the compact fitting for small stay lifts in larders and wall cabinets.
Thanks to the narrow style, AVENTOSHK-XS offers a high level of design freedom.
Features and benefits of AVENTOS HK-XS:
A highly practical solution for cabinets with a low internal depth e.g.
above the extractor
Available in:
Also available:
3D CAD data
Product configurator
2D CAD data
Services
for manufacturers
SERVO-DRIVE uno for AVENTOS is an ideal motion support system for wall cabinets when only one lift system is going
to be operated electrically. The lift system opens with a light touch and, thanks to BLUMOTION, never fails to close
silently and effortlessly.
Available in:
Also available:
3D CAD data
Product configurator
2D CAD data
Services
for manufacturers
The 0-protrusion hinge can be used to optimise inner drawer and pull-out designs, e.g. in the SPACE TOWER larder unit.
Features and benefits of CLIP top 125:
Available in:
Also available:
3D CAD data
Product configurator
2D CAD data
Services
for manufacturers
LEGRABOX sink pull-out optimal use of storage space under the sink
The U-shaped cut-out for the sink pull-out is now an option with standard components of the LEGRABOX box system too,
meaning the design of this special cabinet solution can be made consistent with the rest of your kitchen.
Features and benefits of the LEGRABOX sink pull-out
Available in:
Also available:
3D CAD data
Product configurator
2D CAD data
Services
for manufacturers
AMBIA-LINE
Organisation at its best
A new practical solution has been added to the inner dividing system for LEGRABOX.
With the addition of adapters that are clipped on tool-free, the tried-and-tested AMBIA-LINE drawer frame can be trans-
formed into a functional bottle solution. Three additional flexible cross dividers round off the set to provide a secure place
to store your bottles, no matter what their size.
Available in:
Also available:
3D CAD data
Product configurator
2D CAD data
Services
for manufacturers
TIP-ON BLUMOTION for MOVENTO combines the advantages of the TIP-ON mechanical opening support system with
the reliable BLUMOTION dampening for silent and effortless closing 100% mechanically.
Features & benefits of TIP-ON BLUMOTION:
Clear programme
TIP-ON BLUMOTION
Two functions fascinatingly
combined
Innovative technology
Combines the advantages of
the mechanical opening support
system with proven BLUMOTION
dampening
TIP-ON BLUMOTION
Undeniable ease of use
Available in:
Also available:
3D CAD data
Product configurator
2D CAD data
Services
for manufacturers
DYNALOG (2.5.42 / 2.6.42 / 2.7.42 / 2.8.42 / 2.9.43 / 3.0.43 / 3.1.43./ 3.2.43 / 3.3.43)
Downloading the update: Please make sure that the computer on which DYNALOG is installed is connected to the Internet. Click on the [Internet Update] icon on the DYNALOG main screen and follow the instructions.
After a successful login, all available updates will be listed in the download area. Click on the corresponding update in
the 'Download' column and save it to your desktop. Please close DYNALOG after the update has been downloaded.
Double-click on the download file on your desktop to start the installation follow the instructions on the screen.
Note: The download file can be deleted after the update has been installed successfully.
If you do not have internet access or your internet connection is not suitable for downloading, DYNALOG is also available
on DVD. Send us a fax or email to request your copy.
Email: info@blum.com
General information
All available DYNAPLAN data from the previous version will be kept after the update is installed.
Export and save paths can be defined individually in DYNAPLAN.
DYNASHOP (= shopping basket) is deleted automatically when the update is installed, and replaced by the online
shopping basket. In order to transfer components lists from the online shopping basket to the respective distributor
shop, you will need the relevant access information. Please contact your distributor about this.
Known DYNALOG 3.3 errors are eliminated when this update is installed.
Once DYNALOG 3.1/3.2/3.3/3.4 is installed, the DYNACAT electronic product catalogue will no longer be available
and will be replaced by the new product configurator.
If you have any questions, please contact the DYNALOG hotline the telephone number can be accessed via the
[Hotline Addresses] button on the DYNALOG main screen.
Services
for manufacturers
DYNAPLAN interfaces
DYNAPLAN interface for CAD/CAM programs
Using the DYNAPLAN interface, it is possible to export data to various CAD/CAM programs and further edit them there.
This enables you to take advantage of both programs for optimal use.
Regardless of whether or not you want to use 3D data (dwg, dxf, etc.), export your cabinets planned using DYNAPLAN
into your CAD program (including fittings data) or even implement the fittings selection logic from DYNAPLAN in your
CAD program we offer the right solution.
AutoCAD interface: The optional AutoCAD interface can be installed as soon as you have successfully updated
DYNAPLAN to the latest version (3.4). To do this, you must have installed an Auto CAD full version (20042015).
IMPORTANT: if you are already using a previous DYNALOG version in conjunction with AutoCAD, you must once again
download and reinstall the AutoCAD interface after updating to DYNALOG 3.4.
SolidWorks interface: The optional DYNAPLAN/SolidWorks interface will be available as soon as you have updated
DYNALOG to the latest version (3.4). The required data must be downloaded in order to use the interface.
SketchUp interface: The new DYNALOG version (3.4) allows you to export the cabinets planned in DYNAPLAN in .dae
format. This means that cabinets, including their drilling positions and wooden parts assemblies, can be transferred
directly from DYNAPLAN to SketchUp.
More details about the other current interface partners as well as additional information and films about the functions
can be found at: www.blum.com/interfaces
Services
for manufacturers
applications to suit your individual furniture needs. Parts lists can be copied straight to the shopping basket and transferred
to your preferred hardware distributors.
The product configurator not only makes it quick and easy to find and configure fitting solutions, but also provides you with
extensive information about our products: installation drawings, CAD data, installation instructions as well as brochures,
photos and product videos help you to design, manufacture and market your furniture.
Front weight calculator to help you determine the weight of a specific lift system or
door
Services
for manufacturers
then is complete your individual features. The codes enable quick and
easy access to the parts list, information on manufacturing and assembly, marketing information and CAD data.
The single product search has been integrated into our services offered to manufacturers and is now available online.
From DYNALOG 3.1 onwards, components lists from DYNAPLAN and the product configurator can be merged into one combined
shopping basket.
Once you have saved all of the fittings data to one central location, you will be able to make use of all of the additional features in
the online shopping basket.
You can then check prices and availability in the distributor system
New functions in the shopping basket 'Drag & Drop' is a simple
way of copying and relocating elements
Services
for manufacturers
Ready to go?
The product configurator, as well as the single product search and online shopping basket, require an internet connection and
can be accessed via the following link:
http://opc.blum.com
Logging in as a guest gives you access to applications with a basic level of functionality.
You will need the relevant authorisation to access our full range of services.
Registered users of a DYNALOG full version automatically receive authorisation. You should have already received the
required access information from us via email during the course of the update.
Alternatively, it is also possible to register free of charge online:
http://e-services.blum.com/registration
Contact
If you have any questions about this service, please get in touch with your personal Blum contact or use the various contact
options available online.
www.blum.com/contact
Julius Blum GmbH Furniture Fittings Mfg., 6973 Hoechst, Austria, Tel: +43 (0)5578 705 0, Fax: +43 (0)5578 705 44, Email: info@blum.com, www.blum.com