Beruflich Dokumente
Kultur Dokumente
mms
-iamms
HORN GROUT
Horn grout - a non shrink, non corrosive multi flow high early strength
grout. It may be packed, rodded, vibrated, poured or pumped. Complies
with Corp of Engineers specs CRD-C621 and C1107. Also complies with
various state DOT specs, NYS DOT 701.05 and 701.06. Yield: .43 cu.
ft./bag.
Standard
Package
Skid
Quantity
60
Part No.
TAM10100
Part No.
Standard
Package
Skid
Quantity
TAM10400
50 lb. Pail
36
-iamms
Smms
Part No.
Standard
Package
Skid
Quantity
TAM10200
5 Gal. Pail
36
-iamms
Part No.
Standard
Package
Skid
Quantity
TAM10700
60 lb. Kit
48
-iamms
Dural 306 is a coal tar modified, 100% solids epoxy resin used as a
waterproofing membrane or as a non skid surface for bridge decks,
parking garages, and loading ramps. NYS DOT approved 717.02 also
approved Port Auth. of NY and NJ. Yields vary depending on usage.
Part No.
Standard
Package
Skid
Quantity
TAM10300
50 lb. Pail
36
Part No.
Standard
Package
TAM11020
10 Gal. Kit
81
Smms
Part No.
Standard
Package
Skid
Quantity
TAM 10500
50 lb. Bag
48
.mms
Part No.
Standard
Package
Skid
Quantity
TAM10600
50lb.Bag
48
A cement based fast setting patching material for concrete under water
and wet area patching. It is used in the restoration of concrete man holes,
pilings, sea walls, and dams. Blue Line's consistency enables fast, easy
finishing on underwater applications. Approvals: NYC DOT, NJ DOT,
Suffolk County Highways and Bridges. Yield: .5 cu. ft./bag.
Part No.
Standard
Package
Skid
Quantity
TAM10650
50 lb. Bag
48
Smms
Part No.
Standard
Package
Skid
Quantity
TAM 10660
50 lb. Bag
48
Smms
Standard
Package
Case
Quantity
4 Gal.
Part No.
TAM11600
Smms
THIN PATCH
Part No.
Standard
Package
TAM11900
60 lb. Bag
82
A cement based fast setting patching material for concrete. Putty like
consistency enables fast, easy finishing on vertical and overhead applications without forms. Also may be used horizontally. Complies with
ASTM C-928, NYC DOT, Suffolk County Highway and Bridges, Nassau
County Highways and Bridges. Yields: .5 cu. ft./bag neat, .7 cu. ft./bag
when extended with 40 Ibs. of %" pea gravel.
Smms
Smms
Skid
Quantity
48
Part No.
Standard
Package
TAM11700
4 Gal. Kit
.mms
Smms
A high modulus high strength epoxy adhesive and mortar binder system
used for horizontal and vertical patching and repair, as well as anchoring
bolts and crack injection.
HORNCURE WB-309 is a VOC compliant, clear, water soluble product for treating
concrete. In addition to working as a cure agent for freshly placed concrete,
HORNCURE WB-309 penetrates the concrete surface pores and reacts chemically
with the lime and other soluble calcium compounds in the portland cement. The
result is a hard, dust proof, easy to clean serfuce.
COVERAGE: DURALCRETE formulations coverage rates are approximate and for estimating purposes only. Surface temperature, porosity
and texture will determine actual material requirements.
DURALCRETE
Prime Coat
200 sq. ft./gal.
Resin: Aggr (by vol)
(mixed with silica aggregate) - 1:3
Approx. gals. to make 1 cu. ft. 2.2:8.0
1:1
4.7:4.7
Part No.
Description
Standard
Package
TAM10910
Duralcrete LV
3 Gal. Unit
Case
Quantity
.mms
Part No.
Standard Package
Skid Quantity
5 Gal. Pail
55 Gal. Drum
36
TAM11300
TAM11355
EPOXY REPAIR
A high modulus high strength epoxy adhesive and mortar binder system
used for horizontal and vertical patching and repair as well as anchoring
bolts and crack injection. Fast cures or when application temperature is
below 50 F.
COMPLIANCE: DURALITH GEL meets ASTM C881-90 Type 1 & Type IV,
Grade 3, Class A. DURALITH LV meets ASTM C881-90, Type I, Grade 1,
Class A.
TAM10800
TAM10810
Fresh Concrete
Existing Concrete
Smms
Part No.
COVERAGE: The following coverage rates are approximate and for estimating
purposes only.
Standard
Package
Case
Quantity
12
1
Standard Package
Skid Quantity
5 Gal. Pail
55 Gal. Drum
36
4
TAM11200
TAM11255
iamms
FORMSHIELD
iamms
FORMSHIELD is a low cost, highly effective release agent for metal, plastic, wood
and composition forms. It is a blend of natural organic chemicals which impart a
waterproof film to prevent adhesion of concrete to the forms and prOVide for quick
and easy release. FORMSHIELD is supplied ready to use as a thin, amber colored
liquid of low viscosity.
Part No.
TAM11010
COVERAGE:
Plywood Forms
350 - 500* sq./ft./gal.
Wood Composition Forms
350 - 500* sq./ft./gal.
Metal Forms
800 - 1000* sq./ft'/gal.
Plastic Forms
800 - 1000* sq./ft'/gal.
* Approximate rates may vary depending on porosity and texture of the surface.
Standard
Package
Part No.
4 Gal. Unit
TAM11400
TAM11455
Standard Package
Skid Quantity
5 Gal. Pail
55 Gal. Drum
36
83
I
.mms
COVERAGE: FLEXOLITH coverage rates are approximate, and for estimating purposes only. Suriace temperature, porosity, and texture will
determine actual material requirements.
Overlays Broadcoast Method Flexolith 216 (sq. ft./gal.)
Basalt #8 Aggregate (Ibs./sq. ft.)
Troweldown
Prime Coat
Mortar - Silica Sand
Mortar - Tamms 5H
Flexolith 216
Mortar/Patching
Primer
Resin/Aggr (by Vol.)
Approx. Gals./Cu. Ft.
15t Coat
2nd Coat
Seal Coat
25
80
40
1.2
1.5
Flexolith Flexolith/Aggregate Seal Coat
230 sq. ft./
gal.
1:3 by volume
1:5 by volume
200 sq. fl./
gal.
Flexolith
Flexolith LV
Flexolith
Gel
250 sq. ft./gal.
50 sq. ft./
250 sq. ft./
gal.
gal.
1:3
1:4.5
1:1
2.6:8.0
2:9.1
4.7:4.7
Standard
Package
Part No.
TAM12000
Smms
4 Gal. Case
.mms
Standard
Package
Part No.
TAM12300
tamms
5Gal.
Part No.
TAM12400
TAM 12410
TAM 12420
Sheets
Per Skid
80
50
40
Size Sheet
W' x 4' x 10'
3/4" x 4' x 10'
1" x 4' x 10'
Smms
Surface
Coverage
Primed concrete/masonry
300 - 400 sq. ft./gal.
DURAL epoxy coatings
450 - 550 sq. ft'/gal.
Steel
450 - 550 sq. ft'/gal.
Two coats are recommended for most applications.
A heavy duty, high early strength, non shrink grout. It may be packed,
rodded, vibrated, poured or pumped. Complies with Corp. of Engineers
spec. CRD-C621.
Part No.
TAM18100
TAM18101
.mms
Color
Clear-Matt
Clear-Gloss
Standard
Package
4 Gal. Kit
4 Gal. Kit
TAMMS HP PRIMER
Part No.
Standard
Package
TAM12200
SOlb. Bag
Smms
Skid
Quantity
48 Bags
Horn cork is an expansion joint material composed of selected granulated cork, bonded together with a phenolic resin. Complies with ASTM
D-1752 type 2.
Part No.
Standard Package
Part No.
TAM11810
5 Gal. Pail
TAM12500
84
GROUT SUPREIVI
Size
Cut to Spec.
MASTER BUILDERS
EMACO 1415 REPAIR MORTAR
MASTER BUILDERS
SEY 45 CHEMICAL-ACTION CONCRETE
DESCRIPTION:
SET 45 is a one component concrete repair and anchoring material
which sets in 15 minutes and takes rubber-tire traffic 45 minutes after
placement. This product bonds to both concrete and masonry and can
be used indoors and outdoors for a variety of highway and heavy
industrial repair jobs. It comes in two formulations - SET 45 Regular for use in
ambient temperatures below 85F (29C); and SET 45 Hot Weather for use in
ambient temperatures ranging from 85F to 100F (29C to 38C).
Note: Regardless of the temperature, SET 45 Hot Weather formula with
aggregate should be used for large placements.
RECOMIVI:NDED FOR:
Bridge deck and highway overlays
Concrete pavement joint repairs
Airport runway light installations
Full depth structural repairs
Expansion device nosings
Commercial freezer room repairs
Parking deck and ramp repairs
FEATURES/BENEFITS:
Easy-to-use - just add water
Wide temperature use range - from below freezing to hot weather
exposures
Rapid, high-early strength
Superior bonding - no bonding agent is needed
Resistant to freeze/thaw cycles and deicing chemicals
Only air-curing required
Yields: .39 cu. ft./bag neat, .58 cu. ft. when extended with 60% W'
rounded sound aggregate.
RECOMMENDED FOR:
Highway overlays and repairs
Parking structure deck and ramp repairs
Concrete floor repairs
Full depth patching repairs
Concrete pavement joint repairs
Wastewater treatment facility repairs
FEATURES/BENEFITS:
Wide temperature use range - from 20 to 85 F (- 7 to 29 C)
Rapid high early strength - over 2000 psi in 2 hours
Excellent bond - no bonding agent required
Resistant to damage caused by freeze-thaw cycles
Meets ASTM C 928 for very rapid repair
Economical with the added capability to extend up to 55% by weight
for deep patches
Yields: .45 cu. ft./bag neat, .58 cu. ft./ when extended with 55%
aggregate.
3/8"
Part No.
Standard Package
Skid Quantity
MB30055
55 lb. Bag
60 Bags
Part No.
MASTER BUILDERS
EMACO 1430 REPAIR MORTAR
Rapid strength repair mortar with extended working time
DESCRIPTION:
EMACO T430 is based on new high performance cement technology
resulting in high early strengths at a wide range of temperatures. This one
component product can be placed into service in as little as 6 hours for
standard rubber tire traffic. EMACO T430 is specially suited for hot
weather applications when extended working time is required.
RECOMMElIIOm FOR:
Highway overlays and repairs
Parking structure deck and ramp repairs
Concrete floor repairs
Full depth slab repairs
Concrete pavement joint repairs
Wastewater treatment facility repairs
Truck dock repairs
Skid Quantity
50 lb. Bag
50 lb. Bag
60
60
MASTER BUILDERS
EMACO S8BeA MORTAR
A rheoplastic, one component, cement-based, shrinkage-compensated
mortar
DESCRIPTION:
EMACO S88-CA is a rheoplastic, silica fume, fiber reinforced, one component, high-strength, cement-based, shrinkage-compensated mortar.
It is specially designed for repairing concrete or masonry structures and
can be applied by low pressure spraying or hand troweling.
RECOMMENDm FOR:
Vertical and overhead applications
Bridges, beams, parking garages and tunnels
Piers, manholes, sewers, navigation locks, dams, sea walls and
masonry surfaces
FEATURES/BENEFITS:
Wide temperature use range-from 40 to 100 F (4 to 38 C)
Rapid high early strength - over 2000 psi in 6 hours
Excellent bond no bonding agent required
Resistant to damage caused by freeze/thaw cycles
Meets ASTM C 928 for rapid repair
Economical-with the capability to extend up to 55% by weight for
deep patches
Yields: .40 cu. ft./bag neat, .58 cu. ft. when extended with 55%
318" aggregate.
Part No.
Standard Package
Skid Quantity
MB10010
55 lb. Bag
60 Bags
Standard Package
MB40050 (Regular)
MB40060 (Hot Weather)
FEATURES/BENEFITS:
One component, factory controlled for uniform results
Easy-ta-use - requires only the addition of potable water for mixing
Sprayable
Shrinkage-compensated to reduce early shrinkage cracking
High early and ultimate compressive, flexural and bond strengths
Extremely low permeability
Sulfate-resistant
Freeze-thaw durable
Yield: .45 cu. ft./bag.
Part No.
Standard Package
Skid Quantity
MB88055
55 lb. Bag
60
85
MASTER BUILDERS
EMACO S77-CR fLOWABLE MORTAR
MASTER BUILDERS
EMACO P22 REBAR COATING
DESCRIPTION:
EMACO S77-CR is a rheoplastic, pourable form and pump repair mortar
system. Its unique formulation provides excellent bond, resistance to
sulfates and chlorides, high electrical resistivity, low permeability and
high compressive strengths. EMACO S77-CR provides high pumpability
for structural repairs of columns and beams.
RECOMMENDED FOR:
Formed vertical and overhead applications
Heavy-duty, durable, long-lasting repairs in aggressive environments
Marine structures, water and wastewater facilities and manholes
Bridges, tunnels, concrete pipe. parking structures and ramps
Freeze/thaw environments
Excellent pumpability for high strength repair of columns and beams
FEATURES/BENEATS:
Silica fume formulation provides a material with low permeability
Excellent chloride and sulfate resistance
High electrical resistivity
High strength
Yield: .50 cu. ft./bag
Part No.
Standard Package
Skid Quantity
MB80020
55lb.Bag
60 Bags
MASTER BUILDERS
EMACO SBB-Cft REPAIR MORTAR
Part No.
Standard Package
MB60001
1 Gal. Kit
DESCRIPTION:
EMACO S66-CR is a rheoplastic, flowable repair mortar system. Its
unique formulation provides excellent bond, resistance to sulfates and
chlorides, high electrical resistivity, very low permeability and high compressive strengths.
RECOMMENDED FOR:
Heavy-duty, durable, long-lasting repairs in corrosive environments
Interior and exterior environments
Horizontal and formed vertical and overhead applications
Marine structures, water and wastewater facilities and manholes
Bridges, tunnels, concrete pipe, parking structures and ramps
Chloride and sulfate exposure
Freeze/thaw environments
Repairs of one inch or greater in thickness
FEATURES/BENEFITS:
One component, easy to use
Shrinkage compensated
High slump design results in improved placement
Silica fume formulation provides a material with very low permeability
Good abrasion resistance
High strength
Good workability
Repair may be formed and poured - good pumpability
FEATURES/BENEFITS:
Easy to use - just add water
Sets fast - approximately three to five minutes
Watertight repair - expands as it sets, giving excellent bond to
surrounding concrete
Compatible in appearance to concrete - requires no surface treatment
Durable - stronger than average concrete mixes used for the same
purposes
Part No.
Standard Package
MB66050
55 lb. Bag
Skid Quantity
60 Bags
MASTER BUILDERS
EMACO 503 HYDRAULIC CEMENT
Fast setting hydraulic cement
DESCRIPTION:
EMACO 503 is a fast setting hydraulic cement designed to stop flowing
water through holes and cracks in concrete and masonry surfaces.
RECOMMENDED FOR:
Manholes
Sewer pipes
Tunnels
Basement and masonry cracks
Swimming pools
Floor and wall joints
Part No.
Standard Package
Skid Quantity
MB50350
50 lb. Pail
48 Pails
..
86
MASTER BUILDERS
EMACO R300 PROFILING MORTAR
MASTER BUILDERS
EMACO R320 PATCHING MORTAR
DESCmpnON:
Master Builders EMACO R300 is a one component, fast setting, polymermodified cement-based mortar ideally suited for leveling and/or resurfacing distressed concrete. EMACO R300 is designed for both interior and
exterior use.
APPLICATION THICKNESS:
Vertical: Featheredge to 1 inch (25mm) per lift
Horizontal: Featheredge to Y4 inch (6mm)
DESCRIPTION:
Master Builders EMACO R320 is a one component, polymer-modified,
cement-based mortar ideally suited for patching and/or resurfacing distressed concrete. EMACO R320 is designed for both interior and exterior
use and can be applied by low pressure spraying or hand troweling. It can
be applied vertically in thickness from %" to 1W (6 to 38 mm), and
overhead from %" to 3/4" (6 to 19 mm).
RECOMMENDED FOR:
Vertical and overhead surfaces
Building facades
Balconies and columns
Beam and soffit repair
Bridges and parking decks
Retaining walls
General spalled areas
Tuckpointing
RECOMMENDED fOR:
Vertical surfaces
Pedestrian horizontal areas
Smoothing rough surfaces
Repair of bugholes and honeycombs
fEATURES/BENEATS:
One component easy mixing and handling
Excellent workability/finishability
Very low permeability
Fast strength gain for quick turn around
Ready for foot traffic after 6 hours
Suitable for skim coats
Yield: .45 cu. ft. per 55 lb. bag
Part No.
Standard Package
Skid Quantity
MB10075
55 lb. Bag
60 Bags
fEATURES/BENEfiTS:
One component, polymer-modified for easy mixing and handling
Very low permeability
Low modulus of elasticity for improved substrate compatibility
Sprayable for reduced labor requirements
Yield: .47 cu. ft./Bag.
Part No.
Standard
Package
Skid
Quantity
MB10090
55 lb. Bag
60 Bags
DESCRIPnON:
Master Builders EMACO R310 is a one component, fast setting, polymermodified cement-based mortar ideally suited for patching and/or resurfacing distressed concrete. EMACO R310 is designed for both interior
and exterior use.
MASTER BUILDERS
EMACO R350 VERTICAL/OVERHEAD MORTAR
One component, polymer-modified lightweight vertical/overhead mortar
APPUCAnON THICKNESS:
Horizontal: Y4 inch to 1 inch
w/o aggregate extension
1 inch to 3 inch
with aggregate extension
DESCmPnON:
Master Builders EMACO R350 is a one component, polymer-modified
cement-based mortar ideally suited for patching vertical or overhead
distressed concrete. EMACO R350 is designed for both interior and
exterior use.
RECOMMENDED FOR:
Horizontal surfaces
Walkway aisles
Work areas
Rough floors
Ramps and steps
Bridge and parking decks
Utility areas
Balconies
APPLICATION TIICKNESS:
Vertical/Overhead: Featheredge to 2% inch per lift
RECOMMENDED FOR:
(Vertical and overhead surfaces)
Soffit repairs
General spall areas
Tuckpointing
Balconies and columns
fEATURES/BENEFITS:
One component - easy mixing and handling
Very low permeability
Fast strength gain for quick turn around
Ready for foot traffic after 6 hours
Abrasion resistant
FEATURES/BENEFITS:
One component - easy mixing and handling
Excellent workability/finishabillity
High build capability
Ready to use - just add water
Yield: .45 cu. ft./bag neat, .63 cu. ft. when extended with 25%
%"
pea gravel.
Part No.
Standard Package
Skid Quantity
MB50055
55 lb. Bag
60 Bags
Part No.
Standard
Package
Skid
Quantity
MB10055
55 lb. Bag
60 Bags
87
MASTER BUILDERS
MASTERFLOW 928 GROUT
MASTER BUILDERS
MASTERSEAL 510 CEMENTITIOUS COATING
One component, polymer-modified cementitious protective coating
DESCRIPTION:
DESCRIPTION:
MASTERFLOW 928 grout is specially formulated for use at any consistency-from fluid to damp-pack-for grouting machines or plates requiring
precision-bearing support. This ready-to-use product meets the volume
change and exceed the compressive strength requirement of CRD-C621,
Corps of Engineers Specification for Nonshrink Grout and ASTM C-1107
at fluid consistency.
Master Builders MASTERSEAL 510 is a one component, polymermodified, cement-based protective coating designed for waterproofing,
dampproofing and beautifying concrete, mortar and masonry.
MASTERSEAL 51 0 can be used for both interior and exterior applications.
RECOMMENDED FOR:
Newly repaired concrete to provide a uniform color and appearance
Architectural coating to beautify concrete
Positive side waterproofing and dampproofing of uncracked concrete
Vertical and overhead surfaces
Carbonation protection of concrete
FEATURES/BENEFITS:
Waterproofs and dampproofs surfaces
o Attractive, decorative appearance
Increases resistance to deicing salts and CO 2
Protects concrete surfaces from environmental influences
Yield: One 55 lb. bag when mixed with 1.45 gals. of water will yield 4 gals.
of mixed material and will cover approximately 200 sq. ft. at 31 mil.
thickness.
Part No.
Standard Package
Skid Quantity
MB51055
55 lb. Bag
60 Bags
RECOMP.l:NDED FOR:
Precision grouting of eqUipment and machinery, baseplates,
soleplates and columns
Grouting applications where shrinkage must be eliminated and where
a high-strength grout, similar in appearance to concrete and mortar,
is desired
Applications where high, one-day and later-age compressive
strengths are required
Non-shrink grouting of precast wall panels, beams and columns,
curtain walls, concrete systems, and other structural and
nonstructural building members
Repairs to concrete, such as filling rock pockets and large cracks
Applications calling for a grout to be pumped
FEATURESjBEIIIRTS:
Hardens free of bleeding, settlement or shrinkage when mixed,
placed and cured at almost any consistency-fluid (25 seconds or
more), flowable, plastic or damp-pack
Contains carefully graded, high-quality quartz aggregate for optimum
strength and workability
Yield: .5 cu. ft./bag
MASTER BUILDERS
MASTERSEAL 550 WATERPROOF COAnNG
Flexible, cementitious coating for waterproofing and protection
DESCRIPTION:
Master Builders MASTERSEAL 550 is a ready-to-use, flexible, polymermodified cementitious-based coating designed for waterproofing and
protecting concrete, mortar and masonry surfaces. MASTERSEAL550 is
used for both interior and exterior applications where positive or negative
side waterproofing is reqUired. MASTERSEAL 550 can be applied by low
pressure spraying or hand troweling.
RECOMMENDED FOR:
Positive and negative side waterproofing
Protection of cementitious surfaces
New and repaired concrete to provide a uniform color and
appearance
Architectural coating for aesthetic enhancement
TYPICAL USES:
Water reservoirs, tanks and containers
Basements
Building facades
Balconies and precast elements
Bridges
Retaining walls
Parking structures
Part No.
Standard Package
Skid Quantity
MB92855
55 lb. Bag
60 Bags
DESCRlPDON:
Masterflow 713 grout contains specially graded, natural aggregates and
is formulated to be used at any consistency from fluid to damp-pack. It is
recommended for applications requiring precision support where early
form stripping and/or shoulder trimming are required. Where early form
removal is not required and extended working time is needed, Masterflow
928 grout offers extended working time and higher ultimate strengths.
RECOIWlJlEI'IJED FOR:
Applications where shrinkage must be eliminated and where a grout
similar in appearance to concrete and mortar is desired
Precision equipment, baseplate, soleplate and column grouting
Grouting precast wall panels, beams and columns, concrete systems,
structural building members and curtain walls
FEATURES/BENEATS:
Yield: One unit consisting of 1.5 gal. liquid polymer and 551bs. of powder
will yield approximately 4 gals. and will cover approximately 220 sq. ft. at
31 mil. thickness.
Part No.
Standard Package
Part No.
Standard Package
Skid Quantity
MB80030
68 lb. Kit
MB71355
55 lb. Bag
60 Bags
88
FLOOR TOPPINGS
CONSTRUCTION GROUT
111111
111111
IIII~I
IIII~I
Master Builders
lchnologies
Master Builders
Technologies
DESCRIPTION:
CONSTRUCTION GROUT is a non-catalyzed, multi-purpose construction grout containing mineral aggregate. This portland cement-based
product is designed to meet all of the performance requirements of the
Corps of Engineers Specification CRD-C 621-89 at a flowable or plastic
consistency.
FIELDS OF APPLICATION:
Master Builders cementitious toppings include self-leveling underlayments and overlayments as well as heavy-duty toppings for use in a variety of installations, such as:
Offices, hospitals, and other commercial applications
Utility areas, light-duty warehouse floors
Industrial aisleways, work areas and loading docks
Waste transfer stations
Truck or tractor repair areas
Other heavy abrasion areas
RECOMMENDED FOR:
Normal loads for columns and baseplates
Anchoring bolts, reinforcing bars and roadway dowels
Bedding grout for precast panels
Repairing of cavities resulting from ineffective concrete consolidation
Caulking concrete pipe
Backfilling, underpinning foundations and pressure grouting of slabs
needing alignment
General construction applications
Dry pack applications
FEATURES/BENEmS:
Free of inorganic accelerators, inclUding chlorides or other salts
detrimental to reinforcing steel
Color similar to concrete after curing
Can be extended with clean, well-graded coarse aggregate to fill
large voids without additional mix water
Hardens free of bleeding when placed at a plastic or flowable
consistency and when ambient temperatures are 50F (10C) and
above; yield: A 50 lb. bag mixed to a flowable consistency will yield
.45 cu. ft.
Part No.
Standard
Package
Skid
Quantity
MB70050
50 lb. Bag
60 Bags
Part No.
Description
Standard
Package
Skid
Quantity
MB10030
MB10035
MB10038
Underlayment 110
Topping 112
Anvil Top-300
50 lb. Bag
50 lb. Bag
55 lb. Bag
60 Bags
60 Bags
60 Bags
PRODUCT COMPARISON
Performance
Description
Product
Aggregate
Type
Underlayment 110
Self-leveling cementitious
floor underlaymenl.
Mineral
Topping 112
Mineral
Anvil,Top@300
Metallic
Wear Resistance
Light
Heavy
Impact
Resistance
PLACEABILI1Y
Product
Topping
Depth
Underlayment
110
Up to %" without
extension
III
For exterior and interior use, Weld-Crete will bond new concrete, portland cement plaster, and cementitious mixes to structurally sound concrete floors, walls, columns, beams, steps and ramps.
Topping 112
Up to %" without
extension
Anvil-Top 300
1/2"
and up
Pumpable
Self Leveling!
Leveling
Screedable
Part No.
Size
Skid Qty.
WC10005
5 gal. Pail
36
89
MASTER BUILDERS
MASTERSEALSL 40 PENETRATING SEALER
MASTER BUILDERS
CEILCOTE 848 CP PLUS EPOXY GROUT
t t.t
i i i i i
..
i
i
..
i
..
.
.
. i
.: m
PACKAGING:
Part No.
Standard
Package
Yield
MB10020
MB10025
ISonneborril
KURE-N-SEAL W-WATER-BASED CURE
A transparent water-based curing, sealing and dustproofing compound
for freshly placed and aged concrete. VOC compliant meets the requirements of ASTM C309.
Part No.
SON40040
SON40045
Standard
Package
Skid
Quantity
5 gal. Pail
55 gal. Drum
36 Pails
DESCRIPTION:
MASTERSEAL SL 40 is a one component, alkylalkoxy silane penetrantfor
preventing the intrusion of water and water-borne salts into concrete and
masonry substrates. This product is suitable for use on old and new, fully
cured concrete. It will protect all types of concrete and masonry substrates, including precast and prestressed concrete, brick, mortar, and
stucco. It is particularly well suited for traffic surfaces and architectural
surfaces where color and texture should not be altered.
RECOMMENDED FOR:
Bridge Decks
Highways
Parking Structures
Horizontal and Vertical Surfaces
FEATURES/BENEATS:
Very low viscosity for high penetration
Long-term protection from water and salts
Chemically bonds to concrete
Permeable to water vapor - Allow structure to breathe
Does not darken, stain or gloss concrete surfaces
COVERAGE RATES: 125 to 200 sq. ft. per gallon depending on
conditions
Part No.
Standard
Package
MB49105
MB49155
5 Gal. Pail
55 Gal. Drum
Part No.
BBT10014
BBT10038
BBT10012
BBT10034
BBT10078
BBT10100
BBT10112
BBT10200
90
Width
(in.)
Case
Qty.
V4
288
192
144
96
78
72
48
36
0/8
~
%
7/8
1
1V2
ISonnebornl
SONNEBORN 200 ADHESIVE
Sonolastic 200 Adhesive is a rubber-base, solvent-carried adhesive for
bonding most rigid foam insulation, including polystyrene and urethane,
to themselves orto structurally sound surfaces such as concrete, masonry, wood, metal, gypsum board, asbestos cement board, and composition board. It is excellent for bonding gypsum wallboard or paneling to
studs or furring strips.
Part No.
SON20010
SON20016
Standard
Package
Per
Carton
24
12
ISonneborril
ISonneborril
Part No.
Standard Package
SON40001
3 gal. Unit
ISonneborril
SONOBLOCK CEMENT BASED WATERPROOFING
A cement-based waterproof coating for walls and overhead masonry.
Sonoblock fills, seals, waterproofs, and protects masonry against both
positive and negative hydrostatic pressure. It can be applied above or
below grade, interior or exterior.
COVERAGE:
First Coat: 225 to 250 sq. ft. per 50 Ibs.
Second Coat: 300 to 350 sq. ft. per 50 Ibs.
Part No.
SON40010
SON40015
Standard
Package
Skid
Quantity
50 lb. Pails
501b. Bags
36
50
Standard
Part No.
Package
* Color
SON10001
300 ml. Cartridge
Limestone
SON10002
300 ml. Cartridge
White
Black
SON10003
300 ml. Cartridge
Tan
SON10004
300 ml. Cartridge
SON10005
300 ml. Cartridge Aluminum Gray
SON10006
300 ml. Cartridge Med. Bronze
SON10007
300 ml. Cartridge
Stone
SON10008
300 ml. Cartridge
Off White
SON10009
300 ml. Cartridge Redwood Tan
* Other colors available on request.
Standard
Carton
30
30
30
30
30
30
30
30
30
ISonneborril
SONNEBORN NP2 CAULKING
Two component polyeurethane sealant. Movement capability of 50%.
Extraordinary adhesion and cohesion. Long lasting. Bonds without primer. Color pigments available in a wide variety of colors.
Part No.
Standard
Package
SON20125
ISonneborril
SONNEBORN SL-1 CAULKING
One part self leveling polyeurethane sealant for expansion joints in
concrete joints and decks. It is non priming and requires no mixing. It is
simply poured in place and cures to form a resilient tough seal.
ISonneborril
HLM5000 AN ELASTOMERIC WATERPROOFING
A one-component moisture-curing bitumen-modified polyurethane.
HLM 5000 forms a seamless elastomeric water-proofing membrane for
exterior below-grade or between-slab applications. It protects against
the penetration and lateral movement of water. Available in 4 grades for
application by trowel, squeegee, roller and spray.
Description
Part No.
SON40120
SON40121
SON40122
SON40123
HLM
HLM
HLM
HLM
5000 SL
5000 T
5000 S
5000 R
Self Leveling
Trowel Grade
Spray Grade
Roller Grade
Pkg.
Size
5 Gal.*
5 Gal.
5 Gal.*
5 Gal.*
Coverage
55
60
Skid
Qty.
36
36
36
36
Standard
Part No.
Package
SON 10030
300 ml. Cartridge
SON10032
825 ml. Cartridge
SON10035
2 Gal. Pail
* Also available in Gray.
Color
Limestone
Limestone*
Limestone*
Case
Qty.
30
12
ISonneborril
SONNEBORN SL2 CAULK
Sonolastic SL 2 Sealant is a two-component sealant designed for expansion joints in concrete floors and decks. It is available in a self-leveling
formula as well as a slope-grade version. After mixing, SL 2 is poured or
gunned in place. It cures to form a tough, resilient joint seal. It can be
colored by adding pigments available in a wide range of colors.
Part No.
SON20130
Standard Package
11/2 Gal. Kit
91
!Sonneborril
ISonneborril
ACRYLIC ADDITIVE LIQUID EMULSION
An acrylic-latex-base liquid emulsion with cement mortars and patching compounds. Acrylic Additive improves the strength and adhesion of materials used in
the general repair and restoration of concrete.
A screedable mortar designed for the repair of deteriorated concrete floors, balconies, and industrial facilities. Can be extended with aggregate for "form and pour"
deep repairs. One component, polymer modified for high abrasion resistance and
low chloride permeability. Yields: .45 cu. ft. neat, .55 cu. ft. when extended with
20 Ibs. of coarse aggregate.
Part No.
Package
Skid
Quantity
SON30001
5 gal. Pail
36
Standard
ISonneborril
SONOPREP EPOXY CEMENT ADHESIVE
A low-odor epoxy/cement adhesive used as a bonding agent for concrete repairs
and an anti-corrosion agentforthe protection of rebar. Sonoprep is VOC compliant.
Kit consists of 1 gal. jug part A and 32 lb. bag part B. Yields 2.7 gallons. Covers
150-160 sq. ft. per gallon.
Standard
Package
Skid
Quantity
50 Bags
Part No.
SON30010
SonneborriI
Part No.
SON30020
Package
1 gal. + 42 lb. Bag
Skid
Quantity
48 Kits
Sonneborri
I
I
SONOPATCH 200 TWO COMPONENT VERTICAL I OVERHEAD
REPAIR MORTAR
Fast setting mortar for horizontal, vertical and over-head applications. Rapid
strength gain. Does not sag or slump. Can be molded and shaved. Use above or
below grade. Yields: .4 cu. ft. neat, .54 cu. ft. when extended with 151bs. of coarse
aggregate.
Standard
Part No.
Package
Skid
Quantity
SON30050
50 lb. Bag
48 Bags
ISonneborril
SONOCRETE GEL PATCH
Nonsag single component repair mortar. Can be placed on vertical or overhead
surfaces in lifts up to 2 inches deep without forming and excellent workability.
Structural strength exceeds 6000 psi. 43 lb. bag yields .50 cu. ft.
Part No.
Standard
Package
Skid
Quantity
SON30060
43 lb. Bag
48 Bags
ISonneborril
SONOGROUT NOMETALLIC GROUT
Shrinkage-compensated, nonmetallic, high-strength grout. Sonogrout 10K is a
highly reliable product complying with Corps of Engineers CRD-C-621-83. One
component. Flowable. 50 lb. bag yields .40 cu. ft.
Standard
Part No.
Package
Skid
Quantity
SON30070
50 lb. Bag
50 Bags
ISonneborril
EPOGHIP EPOXY BONDING .. GROUTING ADHESIVE
A two-component epoxy bonding and grouting adhesive. EpoGrip can be used to
structurally bond plastic concrete to hardened concrete, to set anchoring bolts, or
to gravity-feed cracks. Complies with ASTM C 881. 2 Gallon unit consists of 1 gallon
of resin and 1 gallon of hardener. 1:1 mix ratio. Coverage: Approx. 80 sq. ft./pallon at
20 mils on smooth concerete.
Standard
Part No.
SON30030
Size
1 gal.
+ 52 lb. Bag
Skid
Quantity
Part No.
Package
SON30080
2 gal. Unit
48 Bags
Sonneborn
Sonneborri
I
I
EPOGEL EPOXY GEL ADHESIVE
Use for horizontal applications where excellent adhesion, superior abrasion resistance, and high ultimate strength is desirable. Rapid strength gain. High compressive strength. Stands up to heavy traffic. Yields: .4 cu. ft. neat, .50 cu. ft. when
extended with 151bs. of coarse aggregate.
I
I
SONOPATCH 300 POLYMER HORIZONTAL REPAIR
Standard
Part
No.
SON30040
92
1 gal.
Standard
Package
Skid
Quantity
Part No.
Package
+ 1 43 lb. Bag
48 Bags
SON30090
2 gal. Unit
'
ISonneborril
(If
I~
A single component silicone firestop sealant. Meets ASTM E814 and UL 1479. ltis a
self leveling material. It is well suited for fire stopping gaps between perimeter of
floor slab and exterior walls. The flexibility of Biotherm 200 compensates for
mechanical movement of pipes, conduits, electrical cables, expansion joints and
wall/floor junctions. Yields: Tubes, 18.3 cu. in.; Pails, 1220 cu. in.
Standard
Part No.
Package
Skid
Quantity
Part No.
SON40030
5 gal. Pail
36 Pails
BFS20100
BFS20110
Standard
BIOTHERM 200
Package
Box/Skid
Quantity
-JI~--.....-&::>
(\--'_B_IO_'T_H_ER_M__10_0
Part No.
BSF10010
BFS10020
Standard
Package
Box/Skid
Quantity
/Eo
Intumescent firestop caulk, water based: Remains flexible. Meets ASTM E814 and
UL1479. It is used to firestop insulated metal pipe and non insulated metal pipe
wherein movement of pipe does not require elongation of a silicone firestop sealant.
Use for construction joints between top of fire rated wall and underside of floor
above.
Standard
Part No.
BFS50010
BFS50020
BFS50030
BFS50040
Package
Yield
(cu. in.)
Box/Skid
Quantity
18.3
485
1220
36.6
Part No.
TOD11101
TOD11102
TOD11106
TOD11104
Description
Case Quantity
12
12
Novasit K-10 is a non-asbestos, 47-57 pounds per cubic foot air dried density
Portland Cement fly ash through-penetration firestop mortar.
Novasit K-10 Firestop Mortar's unique physical properties provide for easy installation and repenetration. Little or no damming or forming is required. It adheres
to concrete, masonry, galvanized steel and most common through-penetration
materials.
Novasit K-1 0 Firestop Mortar is UL classified for both Flame (F) and Temperature (T)
ratings under ASTM E 814-83 (UL 1479). Classifications include zero clearance
(space between through-penetration and openings in fire resistive wall or floor) and
100 percent visual cable loading. Tested in wall openings of up to 55 square feet and
in floor openings up to 30 square feet. UL Classified per UL System Nos. WK4003,
CBJ4006, WL0001, WL1011, WL1012, CAJ0033, CAJ1032, CAJ2014, CAJ3024,
CAJ5006, CAJ8005. Yield: 1240 cu. inches bag.
Standard
Part No.
Package
Skid
Quantity
BFS90044
44 lb. Bag
45 Bags
'
12
93
SAND MIX
A mixture of Portland Cement, washed and graded sand and gravel. For
repair and building jobs where concrete thickness exceeds 2". Ideal for
pouring footings, anchoring poles and posts, and building curbs, walks,
drives and steps. Exceeds ASTM C387.
Part No.
Description
Skid Qty.
AS40080
42
Part No.
Avg Comp
Strength
Standard
Package
Skid
Quantity
AS00039
4000 PSI
80 lb. Bag
42 Bags
Part No.
Standard
Package
Skid
Quantity
AS30070
70 lb. Bag
40
Part No.
Standard
Package
Skid
Quantity
AS20044
94 lb. Bag
42
~S;T,
CQI~-::i~
SPECIFICATIONS
ASTM C-309, Type II, Class B
AASHTO M-148, Type 11, Class B
94
Skid
Quantity
AS00071
60lb.Bag
56
Lowest price driveway sealer. Offers good bonding and ajet black finish.
Part No.
Standard
Package
Skid
Quantity
AS00091
5 gal. Can
36
Industry standard
High degree of plasticity for bonding
High compressive strength
For structural applications
WRM12005
WRM12055
Standard
Package
BLACKTOP SEALER
A mixture of masonry mortar cement and graded bank sand. Especially designed
for laying brick, block or stone. Can be used to repair masonry or used as a stucco.
Exceeds ASTM Specification C 387.
Part No.
Part No.
Standard
Packing
Skid
Quantity
5 gal. Pail
55 gal. Drum
36 Pails
4 Drums
Part No.
Standard
Package
Skid
Quantity
AS00567
5 gal. Can
36
Part No.
Diameter (in.)
SON90016
SON90024
SON90032
SON90040
SON90048
SON90064
SON90080
SON90096
SON90128
4000
3200
2500
1550
1100
550
400
420
240
3/8
V2
5/8
314
1
1%
1 V2
ISonneborril
PRIMER 733
Primer 733 is a transparent solvent-based product for priming masonry
joints and other recommended substrates before the application of
Sonneborn urethane sealants.
Coverage
35-40 sq. ft. per pint (6.87-7.86 m2/L) or approximately 450 linear feet
(137 m) for a W' (12.7 mm) deep joint.
Part No.
SON73300
Standard
Package
1 Pint
3 Hours
3,725
24 Hours
4,650
28 Days
5,500
Skid Oty.
Description
Rapid Set DOT Cement 50 lb. Bag
56
Precision grouting under machine bases and columns, grouting of anchor bolts, rebar and railing and for the repair of precast concrete,
industrial floors, highways, runways and sidewalks. Rapid Set NonShrink Mortar is also excellent for vertical and overhead repairs. This
product may be extended by adding up to 60% by weight of %" stone.
Yield: A 55 lb. bag will yield .50 cubic ft. and extended with stone will yield
.80 cubic ft.
Compressive strength, psi (ASTM C 109)
1 Hour
2,000
24 Hours
7 Days
7,000
6,600
28 Days
7,600
Part No.
Description
Skid Qty.
RS40050
50
3 Hours
3,725
4 Hours
4,650
8 Hours
5,500
Part No.
Description
Skid Oty.
RS30050
56
Yield:
When mixed with 3/4 gal. of water: .46 cu. ft./55 lb. bag.
When mixed with 1114 gal. of water: .50 cu. ft./55 lb. bag.
Ideal for applications where qUick strength is required, including patching highways, runways, sidewalks and floors.
1 hour
3 hours
1 day
7 days
28 days
24 Hours
4200
7 Days
5100
28 Days
6300
Part No.
Part No.
Description
Skid Oty.
RS2oo60
50
RS50550
4800
5000
5200
8200
11,200
Description
Rapid Set Non Shrink Multi Purpose Grout-Extra High
Strength-55 lb. bag
Skid Oty.
50
95
FIVE STAR
INSTANT GROUT
FIVE STAR
GROUT
A premium all purpose grout for setting equipment, structural columns, anchor
bolts and precast work.
xxx
xxx
4,000
6,200
7,000
8,600
MIN. WATER
PSI (MPa)
MAX. WATER
PSI (MPa)
MIN. WATER
4 Hours
1 Day
3 Days
7 Days
28 Days
Rapid-strength-gain grout for four hour machinery start-up and cold weather grouting.
2,500
4,700
5,500
6,500
(27.6)
(42.8)
(48.3)
(59.4)
(17.3)
(32.4)
(37.9)
(44.8)
4 Hours
1 Day
3 Days
7 Days
28 Days
4,500
7,000
8,000
8,500
9,000
MAX. WATER
PSI (MPa)
(31.1)
(48.3)
(55.2)
(58.7)
(62.1)
4,000
5,000
7,000
7,500
8,000
(27.6)
(34.5)
(48.3)
(51.8)
(55.2)
modified
* modified
Part No.
FSP10100
Standard
Package
Skid
Quantity
1001b.Bag
35 Bags
Part No.
Standard
Package
Skid
Quantity
FSP30050
50 lb. Bag
56 Bags
Five Star Structural Concrete is a high strength, one component, concrete repair
material for horizontal repairs from W' to 12" depths.
HIGHWAY PATCH
A horizontal repair material. Rapid setting. Approved NYC DOT 701.04,701.09.
NEAT
Five Star Structural Concrete via is a high strength, one component, concrete
repair material for vertical and overhead structural repairs.
3 Hours
1 Day
7 Days
28 Days
Structural
Concrete
PSI (MPa)
Structural
Concrete via
PSI (MPa)
2500
5000
7000
800
2000
3500
4000
5000
modified
Part No.
Standard
Package
Skid
Quantity
Part No.
FSP20050
50 lb. Bag
56 Bags
FSP41 050
FSP40050
Description
Structural Concrete
Structural Concrete Via
Standard
Package
Skid
Quantity
50 lb. Bag
50 lb. Bag
56 Bags
56 Bags
FIVE STAR
EPOXY GROUT
FIVE STAR
NBEC GROUT
True non-shrink metallic cement based construction grade grout. Long working
time. High compressive strength. Easy to use. Approval CRD-621, NYS DOT 701.04.
Typical Nonshrink
Characteristics
(CRD C-621 *)
1 Day
3 Days
14 Days
28 Days
Minimum
Water
Maximum
Water
+0.01%
+0.01%
+0.01%
+0.01%
0.00%
0.00%
0.00%
0.00%
Formulated for permanent precision support of base plates and other bearing
surfaces. Easy to use.
Five Star Epoxy Grout is a three component system consisting of one can of
hardener, one pail of resin and two polyethylene lined bags of aggregate. When
mixed together this kit produces one cubic foot (28 litres) of hardened grout.
Typical Compressive Strengths at 73F. ASTM C 579 Method B*
PSI (MPa)
2 Hours
12 Hours
1 Day
7 Days
xxx
8,000 (55.2)
11,000 (75.9)
15,000 (103.4)
modified
Part No.
Standard
Package
Skid
Quantity
Part No.
Standard
Packing
FSP50050
50 lb. Bag
56 Bags
FSP60050
3 Part Kit
96
~
~~
WRM16455
Standard
Package
Skid
Quantity
55 lb. Carton
36 Cartons
SEALANT
~~
SEALTIGHT POLY-JET 1614A is a single component, hot-applied sealant used for
sealing cracks and joints in Portland Concrete pavements that may be subjected to
the spillage of jet fuel, gasoline, motor oil and antifreeze. POLY-JET 1614A is not
compatible for use in asphalt concrete pavements.
USE
POLY-JET 1614A is ideal for sealing joints in highways, bridges and airport runways,
taXiways, refueling and maintenance areas where excellent durability and resistance to jet fuel, gasoline and oil is desirable.
SPECIFICATIONS
A8TM 0-1854
A8TM 0-3581
AASHTO M-282
Federal Specification S8-8-1614 (A)
Federal Specification 8S-S-167 (8)
NOTE: POLY-JET 1614A does not meet the resilience
requirements of ASTM 0-3406.
COVERAGE
For a W' x 1/2" joint, 131bs. per 100 ft.
Part No.
Standard
Package
Skid
Quantity
WRM61450
50 lb. Pail
36 Pails
EAI 16Hl
GARDOX is a pourable, two-component, cold-applied compound for sealing joints in concrete. Chemically reactive
~~ polymers plasticized with coal tar cure to a durable, rubberlike joint seal that offers a firm, smooth, non-tracking sure
face retaining flexibility from - 20F to over + 200F. Effectively seals the joint against
water infiltration and rejects incompressibles.
USE
GARDOX is recommended for sealing horizontal joints on highways, airport
runways, bridges, plaza decks and driveways. Interior uses include the sealing
of joints in industrial floors, garage floors, airplane hangar floor joints, etc.
GARDOX is resistant to incidental spillage of jet fuel, oil and gasoline.
SPECIFICATIONS
AMTM C 920, Type M, Grade P, Class 25, Use T
Federal Specifications S8-S-200E, Type H
Federal Specification SS-S-195, Type H
FAA Item P-605
CRD-C 526, Type H
COVERGE
A joint W' wide by Y2" deep requires approximately 1.4 gallons per 100 linear feet.
Part No.
Standard
Package
Carton
Quantity
1 gal.
4 gal. Carton
WRM50001
~~
Part No.
Size
WRM91205
WRM91210
WRM91215
WRM91220
3!a" x 10ft.
W'x10ft.
314" x 10ft.
1" x 10ft.
Standard
Package
Box of 1000'
Box of 1000'
Box of 700'
Box of 500'
~fIis
~ WATERPROOFING MEMBRANE
~~
Part No.
WRM10010
Standard
Package
50'x4' Roll
1E5T
s
iii
SEALnGHT MEL-ROL WATERPROOFING
EA~ MEMBRANE
~~~
A premium grade, versatile, dependable, sheet type waterproofing membrane
composed of a nominally 56 mil. thick layer of polymeric waterproofing membrane
on a heavy duty, shrink resistant 4 mil. thick, cross laminated polyethylene film. The
two components are laminated together under strict quality control production
procedures to provide dual protection.
Part No.
WRM10015
Standard
Package
60' X38.5" Roll
97
~S
---..!'!!!!!!"'- WITH PLASMATIC CORE
EAITIGHT
1#)
~~
Sheet Size
WRM10020
EA.ITIGH
T WATERPROOfiNG
~S
--~:-"-
PI'IODU~
CCNC~~~
Description
Size
WRM10030
WRM10035
EAifI6HT
~
l!!!!!!!
V4"
SEALMASTER DAMPPROOFINGS
Description
Standard
Package
WRM10075
WRM10080
WRM10085
5 gal. Pail
5 gal. Pail
5 gal. Pail
lili
HI SPEC. POLYMERIC SEALANT - HOT
~SEA
lu HT APPUED
I'!
SEALMASTIC Solvent
Type Dampproofings contain
.
CONCA~R~ an exclusive wetting agent to connect a naturally
hydrophilic surface to a hydrophobic surface to assure
proper adhesion. They provide a flexible coating that will not crack under
normal expansion-contraction.
Description
Standard
Package
WRM10060
WRM10065
WRM10070
Spray-Mastic
Semi-Mastic
Trowel-Mastic
5 gal. Pail
5 gal. Pail
5 gal. Pail
98
~~
4' x 8'
I'>l'ICIDUC"TS
~ ASPHAlT EMULSIONS
--~~
PRCIDU~
CCINC~~
Standard
Package
Skid
Quantity
55 lb. Carton
36 Cartons
USES
Expansion joints
Pressure relief joints
Isolation joints
Hydrostatic conditions
Sound barrier joints
Gaskets (pipe through wall seals)
Irregular and varying size joints
Use with Serva Bond #1 Epoxy Bonder.
1
2
100 - 120
3
4
~-~
~-
~-~
Features
Fast-setting without vulcanizing
Abrasion resistant
Impact resistant
Waterproof
Outstanding bond strength
Traffic resumed in 2 hours
Crack resistant
Non-shrink
Part No.
Roll Size
FOF38936
FOF38948
36" X 300'
48" X 300'
900 S.F.
1200 S.F.
.
99
Cart.
Size
GE1200CC
GE1200WC
GE1200BC
11oz.
11oz.
11oz.
Case
my.
Color
Clear
White
Black
SEALANT
RED697
White
The siliconized acrylic formula creates a durable, watertight bond to most interior/exterior
surfaces. Cartridge with easy applicator tip provides excellent gunnability. Water clean-up.
Stays flexible for years. Meets ASTM Spec. C
669.
This is a premium formula for fast, durable repairs. for patching cracks in driveways, sidewalks, or repairing mortar between bricks,
stone, cinder blocks and on steps. Easy application; water clean-up; retains flexibility when
cured and is paintable - won't stain or bleed.
Gray textured to blend with mortar.
Part No.
Description
RED666
Glazing
Compound
Cartridge
Size
Case
Qty.
10.311. oz.
12
Cartridge
Size
Case
Qty.
10.3fl.oz.
Color
Cartridge
Size
Case
Qty.
RED936
White
10.311. oz.
12
Description
RED636
Blacktop/
Roof Repair
100
RED646
Concrete/
Mortar
Repair
Cartridge
Size
Case
Qty.
10.3fl. oz.
12
(:(i L}ifllff6(p
Contruction grade 35 year siliconized acrylic
caulking for use on doors and windows. This
premium formula is easy to apply and is paintable, odorless and mildew resistant. Easy
clean-up with water.
Part No.
Color
Cartridge
Size
Case
Qty.
RED8460
RED8465
RED8466
RED8467
White
Gray
Black
Clear
10.3fl. oz.
10.3fl. oz.
10.311. oz.
10.3fl. oz.
12
12
12
12
LATEX CAULK
~)I.U~
))
Part No.
Description
Cartridge
Size
Case
Qty.
RED736
Latex Caulking
10.311. oz.
12
GLAZIER'S CHISELS
This Butyl rubber/asphalt formula outlasts conventional compounds. Fills cracks in driveways, repairs flashing around chimneys and
skylights and fills expansion joints in concrete.
Excellent water resistance. Solvent clean-up.
Part No.
Description
12
U~~I@:P
Part No.
ADHESIVE SEALANT
12
12
12
Part No.
Cartridge
Size
Case
Qty.
10.3 fl.oz.
12
This solvent based adhesive permits panel installation on wood, brick, wallboard or metal.
Great for marine repair above the waterline,
installing acoustical tile and underlaying flooring. Outstanding initial tack allows for immediate installation. Solvent clean-up.
Part No.
Description
RED676
Panel!
Construction
Adhesive
Cartridge
Size
Case
Qty.
10.31I.oz.
12
Description
RED1941
Glazier's Chisel
Blade
Width
Application
General Purpose
Waterproofing
(foundation
walls, tunnels)
Installation
Temperature
Waterproofing
System
Royal-Gard &
Roybond 713A
Primer
Royal-Gard'" &
Roybond 740
Primer
1. Release Film
2. Rubberized Asphalt Compound
3. Nonwoven Fiber Glass
Reinforcement
4. Rubberized Asphalt Compound
5. Polyester Film
Property
Low Temperature
Embritllement
Softening Point
-Ring & Ball
AC-20
ALONE
AC20WITH
ROSPHALT''' 50
20F
-35F**
123.8F
250F**
RosphaWM 50 paving mix is applied using conventional paving equipment and operating
procedures.
ItTypical results may vary with AC-20 source. Not intended as a specification
"'"*Approximate:ly
CHASE Cl~~:
Rovston
..,4... .
,,
corporation
.... .
101
Foundations
Roadways
Plaza Decks
Bridge Decks
Reposition during installation without tears, waste, trapped bubble&--Controlled tack adherence reaches full adhesion
in one hour.
Fillets are not needed because of the excellent curbline fit.
Manufacturer's warranty_ Copies available upon request.
Royston's exclusive "Leading Edge" creates a compound-to-compound, monolithic, "self-seal" that is as strong and waterproof as the continuous sheet.
Size
Mil
Self-Sealing
lap Joint Application
10A
48" X 50' 60
Yes
10AR
48" x 50' 70
Yes
Woven glass reinforced bridge membrane with woven polypropylene top sheet
104AHT
48" x 50' 60
Yes
104ARHT
48" x 50' 10
Yes
High-tack, woven glass reinforced architectural membrane with woven polypropylene top
sheet
108AGN
48" x 50' 50
No
108ARN
48" x 50' 70
No
108ARN
24" x 50' 70
No
108ARN
12" x 501 70
No
10AN
48" x 50' 60
Yes
Royal-Gard
(104AHTN)
48" x 50' 60
Yes
Membrane Code
HT - High Tack
N
-Nonwoven
R
- Woven polypropylene top sheet
10A - Standard tack
104 - Nonbridge
108 - Always high tack
102
Primers
713A - Standard
7138 - Low VOC
744 - Surf-Prep (Water base)
740 - Cold Temp (25F-45F)
750 - Sprayable
Ribbed Flat waterstops are ordinarily used in joints where movement is not expected.
Dumbbell waterstops are primarily used in below-grade joints where little or no
movement is anticipated.
Dumbbell with centerbulb waterstops are designed to be used where movement,
even if transverse and longitUdinal, must be accommodated.
Baseal waterstops are designed for ongrade installation at the bottom of concrete
slabs to prevent upward seepage of ground water through joints, or in thin slab
construction, or to waterproof joints at wall/slab junctions.
APPROX.
WT. LBS.
HEAD OF
WATER
APPROX.
WT. LBS.
HEAD OF
WATER
LIN. FT.
FT.
LIN. FT.
FT.
0.39
65
0.83
65
1.53
100
Type D8-1
Type 2
For construction joints.
3/16')
Type 12
Type 08-2
*,,,,..
Construction joints in
1.07 100
,"_J"~.' _~I
For expansion joints W' or less
I-f_ou_n_da_ti_on_w_a_lIs_a_nd_f_oo_ti--.:ng=--s_.+---+------+--------------1 in width.
1,.....~t_
~/8 -*-
Type 13
Construction joints in
100
foundation walls and footings
1.59
f.o---26
Type 08-3
where greater hydrostatic
For expansion joints 1" or less
f--:p_re_s_su_re_is_a_n_tic....:.ip_at_ed_.- - i - - - - I - - - - - - - l - - - - - - - - - - - - - - - j in width.
----1-1
Type 14
For deep embedment in
construction and expansion
joints where shear movement
is not anticipated.
2.24
Type 15
Construction joints in
1 29
foundation walls and footings.
1--1-_ _-1-
150
125
~..l.
~1/2
11."
j 318'
11
1111
Type 11
Construction joints in
1.46 100
'I," W
foundation walls and footings
1111111 t It' Illllll Til
Type 08-7
where greater hydrostatic
pressure is anticipated.
%"
I
Same as Type 08-5 but will
1 - - - - - - - - - - 1 - - - - I - - - - I - - - - - - - - - - - - - j take higher head of water.
Type 11A
2.21
100
2.34
1.14
150
C
-
-II'
~.
3/18
J7Il"
IIlJl:I\&:~
fl!
t
100
0.76
90
_---tot~T
.3/1
-L
_ _--tIT
.+-
JiO
t-,I_ _
,
,--_.IT
..---...
t
1-
',,"
3/16"
1-_ " __
0.98
100
.IIIIIJ!I---',"
!
'I,'
MONTGOMERY ENGRG.
1
.... - - ,
Type 08-5
I lro"
lit II I
Type 08-4
.1-
!3/8
' _ _ 3/Q
..L
,,",1.---6"--0.50
65
Special Shapes
1}l-
~"
sYi+.rnr\}
~3-1/4'~
1..---4.7/16--1
TYPE 25
TYPE 26
2.80
NA
-
103
Horn/Durajoint PVC Waterstop is chemically inert, contains no material leachable by water, and
is highly resistant to acids and alkalis, to ozone and oxygen, and to waterborne chemicals. It is
fungus resistant, as tested against the specifications outlined in Mil. Std. 81 OB, Method 508. It will
notfatigue on repeated flexure, and it retains its strength and elasticity through atemperature range
from as low as -35F to ahigh + 175F.
..l._'-
NOTE: Head pressure ratings are for reference only, Actual ability to resist head pressure depends on the quality of concrete and placement,
APPROX.
WT. LOS.
LIN. FT.
Type 3
Type 3A
Construction joints.
0.50
0.40
HEAD OF
WATER
FT.
1111 lit
r--
Type 4-
Type 48
Similar to Type 4, however
tapered for economical but
effective water stoppage.
0.70
eat
111111
'I," 0,0,
1.04
100
.,
illlllltO~1I
100
'I,"
-.----1
I"
0
"'1 t3/1~'I'''O.0
100
,.
Type 5
1.26
125
Similar to Type 5.
Recommended for small dams
and hydro projects.
Type 5BR
I"
&
./
1.07
150
l/l6to,
l/l~
1
1
Type M3
Economical shape for use in
expansion joints of 1" or less.
1.62
150+
T 3/16 "
Type 7C
Will accommodate extra
movement in both expansion
and shear.
2.24
150+
t'l'
)/,1
c,
,
IlIIt~/'1II11111
Type 08-200
3.01
150+
104
'
IIl1l1i!/I,lt(E) 1111111111
II"
1.64
150
I; 111111
r.9
111111;6
%/f
1.0 %'
2.34
150
00 '!o"
111111111 ;-
00 \' ID 'k'
CH2MHILL
11111111 1
1
CH2M.HILL
'10'
CH2M-HILL
BUREAU OF RECLAMATION
1.26
125
liB'.' [
3116"[
<' 11116"00
0 II Itt It
'''Ilt!
I
3.18
250+
2.1
150+
1.5
150
3ls"t
"3/B''I0.
6"----+
12"
I I I 1111~o!",11 I I I~'
I
9'
r-:-
~:.
wllllill
1.54
100
~- 'r,'
Type D8-300
For expansion joints 1" or iess
in width.
~ 3/8
I~6
I
t'W.O.D.
Type 7f
For large transverse and shear
movements in major
structures.
!,::Ot 111111~~
". 0.0
3/8
HEAD OF
WATER
FT.
11
0.0.
'18
D.O.
Type 7
For iarge heads of water-dams,
major reservoirs, sewage
plants or locks.
APPROX.
WT. LBS.
LIN. FT.
Type 7DI
\00"'"
J/O"
\ 1111 ,I!
Type 31
1--"--1
=::I a II 1~4'
~:IZ"
150+
MONTGOMERY ENG
It~D.
125
2.65
Type 10
I
Type 6
For large expansion joints in
retaining walls or roof slabs.
1/~
MONTGOMERY ENG
ONTARIOHYDRO
1.65
'I' ,
Type 5A
II'
l/'
Type 9
ill
0,0,
3/16
1'/," 0.0.
.-
----j
I,
... ,-----j
O,O.l'k'
1/8
Type 4C
150+
BUREAU OF RECLAMATION
3~
0.89
2.70
65
3/16
ONTARIOHYDRO
Type 8
2.21
100
z',,"o.o. _
_.....1O",...
r/.
t
c ~I
3;4'
.IT
--.L.
Sl/4'
41T
Type 16
Bridge deck joints to meet Cal.
State. Hwy. Dept. specif.
1.1
.058
FT.
PVC Masonry Control Joint units are designed to be used with standard
concrete blocks to provide a vertical joint of stress relief in concrete
masonry walls, while providing adequate shear strength for lateral
stability.
~I
.j:~"
.. !~
NA
r-
2\4" __
-'/."
2'A.,"
NA
'It
\10..
Type M2
Bridge and highway
construction joints between
deck and curbing or parapet
abutments.
1.7
NA
..
.'
~~"'13
.i"
Type 20 and Type 21 are used both in block walls and brick veneer.
They are used with less expensive joint fillers and are ideal between
columns and walls.
Type 20
Type 21
~'I
--,-
Type 17
For greater embedment in
construction joints or thin walls
and slabs.
1.25
f 3116"
50
"t.y."
-A.
9"
1111111111111 ,
II
518,,:1 I1.9I1J"
Type 27
For construction joints on
highways and bridges.
0.78
Type 28
For construction joints on
highways and bridges.
1.00
0.82
1<-1318"
1-:=
1" 'Ill"
+:1'
~-f.
5116"
NA
~
1---6'---1
1/8'
NA
III
I': I
l(l..
Type 22 and Type 24 are used in 8-inch and 6-inch block walls. This
configuration provides protection from foreign materials.
Type 22
,4-718"
I! III IIIII1
TEAR WEB
W>r
>1
(
_I
g'
-r! 19116"
r"'::=:=L
L
I~ ) 1 'T
';'elt
NA
3'
1/8'
Ia
3'
.1
Type 61
Heavy duty for construction
joints in slabs and walls.
Type 23
518"
,I,
0.83
JI8" 'I'
Type 60
For construction joints in slabs
and walls.
IE
0.80
1.51
1/8-.L
'I
'/l'-.L J
TI
".....1..1
.11111111'
1 1.5/1"
-L
J,,,,.
-IT
l607/S''
I-Jw
T ~ '.I/'-----i y-
Type 24
Type 23 is used in block walls and brick veneer with the ability to
provide protection against the penetration of foreign materials.
,'I"
lY2"
118'
Type 29
Used to attach new concrete
structure to existing concrete.
Providing watertight
construction joint with little or
no movements,
flat cross
HEAD OF
WATER
,t'"
Type M1
Used as construction joint in
thin walls and slabs.
~ross
flat ell
Special Shapes
APPROX,
WT. LIBS,
LIN, FT.
~
~
~
flat tee
Tensile Strength
ASTM 0-638
2000 psi
Elongation
ASTM 0-638
360%
Specific Gravity
ASTM 0-792
1.38
Hardness Shore A
ASTM D-2240
80 5
Type 62
Heavy duty for expansion
joints.
1.64
T 1
.-
-...L
J"'"
jT
105
2.10
100
Type 300
318"
1
3WD,D,
-I
3IB"If)
..
liZ"
I~
Type 400
Type DB-10
For horizontal and vertical
expansion joints where
reinforcing steel does not allow
use of 9" waterstop.
0.0.1111"
1.25
125
,-t
!11l"
2.92
150
11/i
f'
1..--- 9'
34
/
"0
.+
_ _ _I t
Type 400C
Same as Type 4C but has one
split flange.
Type 500
Same as Type 5 but has one
split flange.
Type D8-11
65
0.89
100
1.04
100
1.26
125
3.65
1----9"~
150
~L
1"
1~0.0.2_'I4"T
Type 700
Same as Type 7 but has one
split flange.
Type 3100
For extra high dams.
1.62
Of
I--
J / '6
~
t--- 6 ---------j
~~"4
Part No.
3.18
250+
TAM99001
TAM99002
Wt.
Size
(in.)
Watts
(Ibs.)
2 x 14
4 1/2 X 14
600
600
5
5
GROOVE IN FORMWORK
a,
i.
_._""f16
3/S
f+----9_
150+
WATERSTOP IRONS
106
----i
l/8
'---4
w'
_ _IT
'I'
Type DB.,6
~1.u4.
0.50
I - - - ~ 12" -
:::::
I,D.;/2"-----{
Benloseal troweled
over form-lies
<
Type 1 Panels
j ......,.---
Waterstop-RX
(min. 3" coverage)
Part No.
VOL10100
Description
Panel Size
Waterstop-RX is a flexible strip, concrete waterstop that provides a permanent seal by expanding upon
contact with water. Waterstop-RX is a
sodium bentonite product that is designed to replace conventional PVC
waterstop, thus eliminating the need
for split forming and product seam
welding.
VOlCLAY WATERSTOP - me
"'. RX 101
POLY SCRIM
RX 102
RX lOlT
Desription
2'
Tubes
Part
No.
VOL10600
VOL10700
BENTOSEAL
Ctn Qty
Hydrobar
16
Roil
Size
Desc.
Rolls/
Case
6
6
VOLeLAV WATERSTOPPAGE
TROWEL-GRADE
BENTONITE
COM-
POUND
Bentoseal is a patented, trowelgrade sodium bentonite compound
used in detailing mastic around penetrations, corner transitions, uneven
areas that may cause penetration of
Volclay Panels, filling up small honeycombs and cracks, tie back plates,
etc. Bentoseal swells upon contact
with water, forming a tight pressure
seal when used in a confined area.
Part No.
Description
Desription
Volclay
Waterstoppage
Size
50 Lb. Bag
Size
VOL10400 Bentoseal
3 Gal. Pail
Trowel-Grade
Waterproofing Mastic
107
VOLIEX
BENTONITE GEOTEXTllE WATERPROOfiNG
Reinforced
concrete slab
minimum 4"
(100 mm) thick
Bentoseal troweled
over form-ties
<
IiiO
'$
"
fj
L\
~--
Voltex<ID
----- --------------
~~
Hyd"b" Tob"
Waterstop-RX
(min. 3" coverage)
Voltex is a high-strength geotextile based Volclay waterproofing prod uct that can be used in both vertical and horizontal
applications including under slabs, property line waterproofing, solder pile and lagging and below-grade foundation
applications. Sodium bentonite is uniformly encapsulated between two layers of woven and nonwoven geotextiles.
When concrete is poured against Voltex, a tenacious bond is created yielding an average adhesion value of 151bs. per
linear inch.
Part No.
V0L10500
880
108
Description
Roll Size
4'x15'xV4"
NY 11222
Tel: 718-387-0300 FAX: 718-387-1874
,
End Plate
/
",,,-'
with PVC
,_;utlet
I (l
BRS ~
L--tJ
OUII;IS~-
."'
POlYDRAIN GRATES
POLYDRAIN ACCESSORIES
309
208~258 ~308
e.~~~;,"
oSa
108
158
PVC Connectors.
PXliK,"NY 11729
'si'.
1 SOUTH SECOND"
'Q~ER
Tel: 631-242-8555 .- F~~: (i31-6()j-8869
~
,",
r""
\}"
- '
109
~
SNAPTIES
S-PANEL TIE
limb' '" 3
i!\
ii
SINGLE WALER
COIL TIES
'~q
~
-
SYSTEM~,:~
e,
~ -~~=,
=.:-.z:~
"
FOR,M,ING,
STEEL WEDGES
~
,~"
~)\\.:
'II ':
COIL BOLTS
COIL NUTS
~'
PLASTIC
PLUGS
~
~
ADJUSTABLE
INSERTS
I:J
PENCIL ROD
FORM CLAMP
ST-27 ADJUSTABLE FORM BAACE
~
I
"""""",
:: .,' :
,'
~, . ~
:,
SLAB BOLSTER
':.'.'
'~r~
QjC"~
BRIDGE DECK HANGERs
LIFTING
HARDWARE
WING NUTS
BAR SUPPORTS
BRIDGE DECK
,:",'
~
t:!fl!I
4l5"g
SLAB BOLSTER UPPER
~"
BEAM BOLSTER
~>~
BEAM BOLSTER UPPER
~
JOIST CHAIR
~
~~
PAVING
~;
1\ ~
CONTINUOUS
HIGH CHAIR
''k:.:Jt
CONTINUOUS HIGH
CHAIR UPPER
4PI!
,
l! JI
PLASTIC SUPPORTS
'~~"'N
~
~
DDwe:'""
TUBE METAUPI.ASTiC
DOWEL STAKES
C;S& SY $='. $I
RD-26 PAPER TUBING
RD-27 PLASTIC TUBING
110
1-
SCREED CHAIRS
SCREED HOLDERS
CONCRETE BLANKETS
FOR COLD WEATHER CONCRETE CURING
Insulated concrete curing blankets provide proper curing temperatures for freshly
poured concrete in colder weather. Closed cell foam insulation provides the highest
R values available. Standard size is 6' x 25' and is available both in W' and
1" thickness.
Diameter
(in.)
Length
(ft.)
Wall Thick
(in.)
12
14
16
18
20
24
30
36
12
12
12
12
12
12
12
12
.225
.250
.300
.300
.375
.375
0400
0400
Part No.
CB62512
CB62510*
Size (ft.)
Thickness (in.)
6x25
6x25
V2
1
BLASTING SAND
Made from 10 oz. burlap on one side and 5 mils of white polyethylene film extruded
onto the burlap on the other side. The burlap provides even distribution of water
while the poly side retains moisture while reflecting heat. Prevents surface drying
and cracking of freshly placed concrete.
Part No.
BUR10100
Part No.
Standard
Package
Skid
Quantity
AS0651
100lb.Bag
30
Description
Size (ft.)
10 x 100
BURLAP
FOR WET CURING OF CONCRETE
Standard
Package
Skid
Quantity
AS0141
30
10 oz. burlap retains water and allows for proper concrete curing during warmer
months when premature surface drying usually occurs. Conforms to all state and
federal regulations.
Reinforced poly sandbags for general construction applications. Frequently used for weighting
barricades and other equipment around construction sights.
Part No.
PSB01426
Size (in.)
BUR53010
Description
Roll Size
(ft.)
5 x375
CALCIUM CHLORIDE
Calcium chloride pellets provide long lasting protection against freezing of most
liquids even in the harshest winters. Packed in 80 lb. bags.
14x 26
Part No.
Description
Bag
Size
Skid
Qty.
CC10080
80 lb.
35
"
111
HI-LOW THERMOMETERS
Registers the high and low atmospheric temperatures during the last
temperature cycle. Side by side mercury columns register and hold the
high and low temperatures. Easy to read and reset with special ceramic
magnet kept in a pocket on the thermometer. Range -40F to +120F.
Size 2W' wide x 10" high.
Part No.
HLT00415
Description
Hi-low thermometer -40F to 120F
Plastic cylinder molds are nonabsorbent and are supplied with close
fitting caps. For curing test specimens to ASTM specifications.
Part No.
Size (in.)
CCM30600
CCM40800
CCM60120
ASPHALT THERMOMETERS
.'
3x6
4x8
6x 12
TAMPING RODS
..
Used for rodding specimen concrete into cylinder molds. Tamping rods
are 5/S" diameter steel rods with bullet shaped nose.
Hi visibility bimetal type thermometer has a 1" dial face and 5" spiked
stem. All stainless steel construction. Supplied in plastic carrying case
with pocket Clip. Temperature range: +50F to 500F.
Part No.
AST02380
Part No.
Description
-CT-R-O-5-80-0---------s/s-"-S-te-e'-r-a-m-p-in-g-R-od-------
Description
Asphalt thermometer +50F -500F
SLUMP CONES
Slump cones are made to ASTM specifications. Made from spun steel
with no rivets or seams on the inside and is smooth from top to bottom.
Includes a rodding iron and instructions on how to make consistently
accurate slump tests.
Part No.
PST40160
112
Description
General purpose thermometer - 40F -160F
Part No.
CSC10100
Description
Concrete Slump Cone
Physical Properties
Fabric:
Fabric weight:
Tensile strength (Ibs.):
Elongation:
Burst strength:
AOS:
Slurry flow rate:
UV resistant polypropylene
(ASTM 0-3776C) 3.6 oz/syd
(ASTM 0-4632) 140
(ASTM 0-4632) 20%
(ASTM 0-3786) 300 Ibs
(ASTM 0-4751) 30
Custom fabric and stake sizes available for individual state D.O.T. requirements.
480 HStt
4.0
Fabric oz/yd 2
150
Weight grams/m 2
60
Thickness (mils) ASTM D-1777
120
Grab strength (Ibs.) ASTM 0-4632-86
75
Elongation (%) ASTM 0-4632-86
Puncture strength ASTM 0-4833
45
Mullen burst strength (PSI) ASTM 0-3786-87
215
50
Trapezoid tear strength (Ibs.) ASTM 0-4533-85
70-140
AOS ASTM 0-4751
170
Water flow rate (GPM/fF) ASTM 0-4491
1.7
Permittivity ASTM 0-4491 (Sec-')
UV resistance ASTM 0-4355-84
% strength retained after 500 hours
85
STD. roll length (ft.)
400
STD. roll width (ft.)o
00 Seamed rolls and special widths available.
* Exceeds 1200 psi capacity of testing gauge.
480
680 HStt
680
880
1080
1280
1480
1680
1880
2080
4.0
150
85
90
100
50
170
55
70-140
150
2.3
6
200
70
180
75
80
250
75
70-140
100
1.9
6
200
85
145
100
75
230
70
70-140
145
2.0
8
270
120
210
100
145
380
110
70-140
140
1.9
10
340
130
260
100
145
500
130
140-200
100
1.25
12
410
145
335
100
195
700
145
140-200
90
1.2
14
475
155
360
100
195
710
180
140-200
90
1.2
16
545
175
470
100
300
800
220
140-200
80
1.1
18
610
190
610
100
350
1200
250
140-200
80
1.1
20
675
210
675
100
385
1200t*
275
200
75
1.0
85
400
85
400
85
400
85
300
85
200
85
200
85
200
85
200
85
85
300
200
12.5 & 15 ft. -!>
Rolls wound on 4" (1.0.) cores and wrapped with black polyethylene film,
tt Needled and heatset.
No warranty or guarantee expressed or implied is made regarding the performance of any product since the conditions of use are beyond our control. Nothing contained herein is to be construed as permisSion or recommendation to infringe
any patent. The informafion presented herein, while not guaranteed, is to the best of our knowledge accurate and reliable, American Engineering Fabrics Inc. assumes no responsibility for the use of information presented and hereby
disclaims ailliabilily in regard to such use.
113
480HS
480
680
680HS
Asphalt overlay
880
1080
1280
1480
1680
1880
2080
Drainage
Separation
Reinforcement
Embankment stabilization
Railroad trackbed stabilization
AEF100W
Fabric structure
Polymer composition
Fabric width
Fabric length
Weight
Grab strength
Trap tear strength
Burst strength
Puncture
Elongation
UV resistance
Permittivity
AOS
AEF200W
Fabric structure
Polymer composition
Fabric width
Fabric length
Weight
Grab strength
Trap tear strength
Burst strength
Puncture
Eiongation
UV resistance
Permittivity
AOS
AEF300W
Fabric structure
Polymer composition
Fabric width
Fabric length
Weight
Grab strength
Trap tear strength
Burst strength
Puncture
Elongation
UV resistance
Permittivity
AOS
114
Results
Property
D-3776C
0-4632
0-4533
0-3786
0-3787 (mod)
0-4632
0-4335
0-4491 (Sec-')
0-4751
Woven
Polypropylene
12.5',15',17.5'
400'
30z./yd.
1801bs.
651bs
350 psi
751bs
20%
70% + (500 hrs)
0.14
40
AEF600W
Fabric structure
Polymer composition
Fabric width
Fabric length
Weight
Grab strength
Trap tear strength
Burst strength
Puncture
Elongation
UV resistance
Permittivity
AOS
0-3776C
0-4632
0-4533
0-3786
0-3787 (mod)
0-4632
0-4335
0-4491 (Sec")
0-4751
Woven
Polypropylene
12.5',15',17.5'
400'
4.2oz./yd.
200lbs
90lbs
400 psi
90lbs
20%
70% + (500 hrs)
0.125
40
AEF650W
Fabric structure
Polymer composition
Fabric width
Fabric length
Weight
Grab strength
Trap tear strength
Burst strength
Puncture
Elongation
UV resistance
Permittivity
AOS
0-3776C
0-4632
0-4533
0-3786
0-3787 (mod)
0-4632
0-4335
0-4491 (Sec")
0-4751
Woven
Polypropylene
12.5',15',17.5'
400'
5.8oz./yd.
300lbs
120lbs
600 psi
150lbs
20%
70% + (500 hrs)
0.106
40
Test Method
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
Test Method
Results
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
D-3776C
0-4632
0-4533
0-3786
0-3787 (mod)
0-4632
0-4335
0-4491 (Sec-')
0-4751
Woven
Polypropylene
12.5'
400'
6.30z./yd.
400 x 250 Ibs
100lbs
450 psi
1251bs
25x 15
70% + (500 hrs)
1.5
40
0-3776C
0-4632
0-4533
0-3786
0-3787 (mod)
0-4632
0-4335
D-4491 (Sec")
0-4751
Woven
Polypropylene
6',12'
300'
6.30z./yd.
41O/28s lbs
115 x 651bs
495 psi
1351bs
30%
70% + (500 hrs)
0.247
70-100
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
No warranty or guarantee expressed or implied is made regarding the pertormance of any product since the
conditions of use are beyond our control. Nothing contained herein is to be construed as permission or
recommendation to infringe any patent. The information presented herein, while not guaranteed, is to the best of
our knowledge accurate and reliable. American Engineering Fabrics, Inc., assumes no responsibility for the use of
information presented and hereby disclaims aliliabiiity in regard to such use.