Beruflich Dokumente
Kultur Dokumente
Corporate Headquarters
Fanvil Technology Co., Ltd
Address: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District,
Bao'An, Shenzhen, 518101 P.R. China
Web Site: www. Fanvil.com
Tel: +86 755 26402199
Fax: +86 755 26402618
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Safety Notices
Please read the following safety notices before installing or using this phone. They are crucial for the safe
and reliable operation of the device.
Please use the external power supply that is included in the package. Other power supplies may cause
damage to the device, affect the behavior or induce noise.
Before using the external power supply, please be sure it is for use with your power voltage. Incorrect
power voltage may cause fire and damage.
Please do not damage the power cord. If the power cord or plug is damaged, do not use it. This may
cause fire or electric shock.
The power plug should be accessible at all times because this is the only way to remove power from the
device.
Handle the phone carefully. Do not drop it or shake it. Rough handling can cause internal damage.
Do not install the device in direct sunlight. Also do not put the device on carpets or cushions, or other
poorly ventilated locations. This may cause fire or overheating.
Avoid exposure to temperatures above 40, below 0 or high humidity. Avoid wetting the unit with
any liquid.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. If cleaning is
necessary use a soft cloth that has been slightly dampened in a mild soap and water solution.
Do not touch the power cord or network cable during a thunderstorm. There is a slight risk of
electrical shock.
Do not attempt to open the device. Consult your authorized dealer for repair.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Table of Contents
1
1.1
1.2
1.3
KEYPAD .......................................................................................................................................................... 8
1.4
INPUT/OUTPUT PORTS................................................................................................................................... 10
1.5
1.6
1.6.1
1.6.2
1.6.3
1.6.4
1.6.5
1.6.6
2.1
2.2
NETWORK SETTINGS..................................................................................................................................... 14
2.2.1
2.2.2
Static IP Mode.............................................................................................................................................. 15
2.2.3
DHCP Mode................................................................................................................................................. 16
3.1
MAKING A CALL............................................................................................................................................ 17
3.1.1
3.1.2
3.2
3.3
3.4
3.5
3.6
CALL WAITING.............................................................................................................................................. 18
3.7
3.8
MUTE ........................................................................................................................................................... 19
3.9
CALL TRANSFER............................................................................................................................................ 19
3.9.1
3.9.2
3.9.3
www.fanvil.com
Beijing Tel:+86-10-5753-6809
3.10
3.11
4.1
4.2
4.3
4.4
4.5
4.6
4.7
HOTLINE/WARMLINE .................................................................................................................................... 21
4.8
4.9
APPLICATION ................................................................................................................................................ 21
4.9.1
SMS ............................................................................................................................................................. 21
4.9.2
Memo ........................................................................................................................................................... 22
4.9.3
4.9.4
Ping .............................................................................................................................................................. 22
4.10
4.10.1
4.10.2
Line .............................................................................................................................................................. 23
4.10.3
4.10.4
DTMF .......................................................................................................................................................... 24
4.10.5
URL ............................................................................................................................................................. 24
4.10.6
None............................................................................................................................................................. 24
5.1
5.2
5.3
5.4
5.5
5.6
5.7
INTERCOM .................................................................................................................................................... 25
5.8
5.9
5.10
5.11
5.12
5.13
www.fanvil.com
Beijing Tel:+86-10-5753-6809
5.14
6.1
KEYBOARD ................................................................................................................................................... 27
6.2
6.3
6.3.1
6.3.2
6.4
6.5
6.6
6.7
LANGUAGE ................................................................................................................................................... 29
7.1
GENERAL ...................................................................................................................................................... 29
7.2
ACCOUNT ..................................................................................................................................................... 29
7.2.1
Basic Settings............................................................................................................................................... 29
7.2.2
7.2.3
7.3
NETWORK ..................................................................................................................................................... 30
7.4
SECURITY ..................................................................................................................................................... 30
7.5
MAINTENANCE ............................................................................................................................................. 31
7.6
FACTORY RESET............................................................................................................................................ 31
8.1
INTRODUCTION OF CONFIGURATION.............................................................................................................. 31
8.1.1
8.1.2
8.2
8.3
8.3.1
BASIC.......................................................................................................................................................... 33
8.3.1.1
Status............................................................................................................................................................ 33
8.3.1.2
Wizard.......................................................................................................................................................... 34
8.3.1.2.1
Static IP ........................................................................................................................................................ 35
8.3.1.2.2
DHCP ........................................................................................................................................................... 35
8.3.1.2.3
PPPoE .......................................................................................................................................................... 35
8.3.1.2.4
8.3.1.3
8.3.1.4
Language...................................................................................................................................................... 38
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.2
Network ....................................................................................................................................................... 39
8.3.2.1
8.3.2.1.1
Static IP ........................................................................................................................................................ 41
8.3.2.1.2
DHCP ........................................................................................................................................................... 41
8.3.2.1.3
PPPoE .......................................................................................................................................................... 41
8.3.2.2
8.3.2.3
8.3.2.4
8.3.2.5
DHCP SERVICE.......................................................................................................................................... 47
8.3.2.6
TIME&DATE .............................................................................................................................................. 48
8.3.3
VOIP ............................................................................................................................................................ 50
8.3.3.1
8.3.3.2
IAX2 ............................................................................................................................................................ 57
8.3.3.3
8.3.3.4
8.3.4
Phone ........................................................................................................................................................... 63
8.3.4.1
AUDIO ........................................................................................................................................................ 63
8.3.4.2
FEATURE .................................................................................................................................................... 65
8.3.4.3
DIAL PLAN................................................................................................................................................. 69
8.3.4.4
CONTACT ................................................................................................................................................... 70
8.3.4.5
8.3.4.6
8.3.4.7
Multicast ...................................................................................................................................................... 74
8.3.5
8.3.5.1
8.3.5.2
Softkeys ....................................................................................................................................................... 78
8.3.5.3
8.3.6
Maintenance ................................................................................................................................................. 79
8.3.6.1
8.3.6.2
Syslog .......................................................................................................................................................... 83
8.3.6.3
8.3.6.4
Update .......................................................................................................................................................... 86
8.3.6.5
Access .......................................................................................................................................................... 88
8.3.6.6
Reboot .......................................................................................................................................................... 89
8.3.7
Security ........................................................................................................................................................ 89
8.3.7.1
8.3.7.2
Firewall ........................................................................................................................................................ 90
8.3.7.3
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.7.4
VPN ............................................................................................................................................................. 94
8.3.7.5
Security ........................................................................................................................................................ 95
8.3.8
Logout .......................................................................................................................................................... 96
APPENDIX ................................................................................................................................................. 97
9.1
SPECIFICATION .............................................................................................................................................. 97
9.1.1
Hardware...................................................................................................................................................... 97
9.1.2
9.1.3
9.1.4
9.2
www.fanvil.com
Beijing Tel:+86-10-5753-6809
1.1
Thank you
Thank you for purchasing the C62 Voice Over Internet Protocol (VoIP) telephone. The C62 is a fully
featured telephone that provides voice communication over the data network. This phone has all the features
of a traditional telephone and all gives access to many data service features. This guide will help you easily
use the various features and services available on your phone.
1.2
Box Contents
The following items should be packed with your telephone. Please contact your dealer if any of them are
missing.
Telephone (Main body) with display and keypad
Handset
Handset cord
Power supply
Ethernet cable
1.3
Key
Keypad
Key name
Function Description
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Navigation
Directory
Mute
Line1/2/3/4
The C62 has 4 SIP lines. The user may select either of
them to place a call if they have been registered to a SIP
server.
Volume -/+
Redial
Speaker
phone
Indicator
light
When off hook, this will dial the last called number.
In stand-by mode, it will check the Outgoing Call.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
1.4
Port
History
Keyboard
DSS keys
Input/Output Ports
Port name
Description
Power switch
Input: 5V AC, 1A
WAN
LAN
10/100M Connect it to PC
Headset
Handset
www.fanvil.com
Beijing Tel:+86-10-5753-6809
External console
interface
1.5
Icon Introduction
Icon
Description
Call out
Call in
Call hold
Auto answer
Call mute
Contact
DND(Do not Disturb)
In hand free mode
In handset mode
In headset mode
SMS
Missed call
Call forward
www.fanvil.com
Beijing Tel:+86-10-5753-6809
1.6
LED Introduction
1.6.1
LED Status
Steady green
Slow blinking red
Steady red
Fast blinking red
Off
1.6.2
LED Status
Steady green
Slow blinking red
Steady red
Fast blinking red
Off
1.6.3
Description
The object is online.
The object is ringing.
The object is active.
The object has failed.
Not subscribed.
LED Status
Steady green
Fast Blinking Green
Slow Blinking Green
Slow Blinking Red
Off
1.6.4
Description
The object is idle.
The object is ringing.
The object is active.
The object has failed.
Not subscribed.
Description
The account is active.
There is an incoming call to the account.
The call is on hold.
Registration is unsuccessful.
The line is not subscribed or idle.
LED Status
Blinking Green
Off
Description
There are new voice mails.
There is no new voice mail.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
1.6.5
LED Status
Steady red
Blinking red
Off
1.6.6
Description
Power on.
There is an incoming call.
Power off.
LED Status
Blinking red
Description
There is an incoming call
2.1
1.
a.
b.
Connect to the network. Use the Ethernet cable in the package to connect the WAN port on the back of
your phone to an Ethernet port. The following two figures show connection options.
Direct network connectionThis method requires at least one available Ethernet port. Connect the
WAN port on the back of your phone to the Ethernet port. Since the phone has a built-in router, it can
be connected directly to the network.
Shared network connectionUse this method if you have a single Ethernet port which is already in use.
Disconnect the Ethernet cable from the Ethernet port and attach it to the WAN port on the back of the
phone. Then use the Ethernet cable in the package to connect the LAN port on the back of the phone to
the other device. The IP Phone now shares a network connection.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
2. Connect the handset to the handset jack using the handset cable in the package.
3. Connect the power supply to the DC port on the back of the phone. Connect the power supply to a
standard power outlet. Note that the power supply will not be needed if your network provides
Power over Ethernet (PoE).
4. The phones LCD screen displays INITIALIZING. Later, a ready screen displays the date, time
and current network mode.
If your LCD screen displays different information from the above, more information may need to be entered.
Please refer to the next section. If your phone registers into your IP telephony Server, it is ready to use. If
not, continue to read for more configuration information.
2.2
Network Settings
DHCP is supported by default. This allows the phone to receive an IP address and other network-related
settings (Netmask, IP gateway, DNS server) from the DHCP server. If no DHCP server is available, the
network connection settings must be changed. Follow the instructions below to change to either PPPoE or
static IP.
2.2.1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
PPPoE Mode
www.fanvil.com
Beijing Tel:+86-10-5753-6809
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
2.2.2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Static IP Mode
www.fanvil.com
Beijing Tel:+86-10-5753-6809
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
2.2.3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
DHCP Mode
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Basic Functions
3.1
Making a call
3.1.1
Call Device
3.1.2
Call Methods
Press an available line button then use one of the following methods to place a call.
1. Dial the desired number using the keypad.
2. Press the History softkey. Use the navigation buttons to highlight the number to call. Use the LEFT
ARROW or RIGHT ARROW to choose Missed Calls, Incoming Calls and Outgoing Calls.
3. Press the REDIAL button to redial the last number called.
4. Press a programmable key which has been configured as a speed dial button.
5. Press the Dial softkey to make the call if necessary.
3.2
Answering a call
If the phone is idle, lift the handset, press the Speaker button or Answer softkey to answer using the speaker
phone, or press the headset button to answer using the headset.
If the phone is in use, press the answer softkey.
During the conversation, you can alternate between Headset, Handset and Speaker phone by pressing the
corresponding buttons or picking up the handset.
3.3
Press the DND softkey to active DND Mode. New incoming calls will be rejected and the display will
icon. Press the DND softkey twice to deactivate DND mode. Incoming calls will be stored in
show:
the Call History.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
3.4
Call Forward
This feature allows forwarding an incoming call to another phone number. The display shows
The following call forwarding events can be configured:
Off: Call forwarding is deactivated by default.
Always: Incoming calls are immediately forwarded.
Busy: Incoming calls are immediately forwarded when the phone is busy.
No Answer: Incoming calls are forwarded when the phone is not answered
period.
icon.
after a specific
3.5
Call Hold
3.6
Call Waiting
3.7
www.fanvil.com
Beijing Tel:+86-10-5753-6809
3.8
Mute
distant party will not hear the party on the C58, but the distant party can still be heard.
Press Mute again to return to normal conversation.
3.9
Call transfer
3.9.1
Blind Transfer
During a conversation, press the XFER key, dial the number to which the call is to be transferred followed by
"#" and then hang up.
3.9.2
Attended Transfer
During a conversation, press the XFER key, dial the number to which the call is to be transferred followed by
"#" and press Send. After the third party answers, press XFER to complete the transfer.
NOTE: Call waiting and call transfer must be enabled.
NOTE: The SIP server must support RFC3515.
3.9.3
Semi-Attended Transfer
During a conversation, press the XFER key, dial the number to which the call is to be transferred. Then
press the Send softkey. When the third party phone begins to ring, press XFER to complete the transfer.
NOTE: Call waiting and call transfer must be enabled.
3.10
1.
2.
3.
4.
5.
6.
3.11
Multiple-way call
www.fanvil.com
Beijing Tel:+86-10-5753-6809
1.
2.
3.
4.
5.
Advanced Functions
4.1
Call pickup
This allows a third party to answer a call by dialing a code. For example: A calls B, but there is no answer.
C can go off hook, dial a code plus Bs number, and pick up the call.
The following chart shows how to configure this in the dial peer screen.
*1* is the code. After saving the above configuration, C can dial *1* plus Bs phone number to pick up As
call. The prefix can be set to anything the user desires that does not interfere with other dialing rules.
4.2
Join call
This allows a third party to join an existing call. For example: If B and C are on a call, A can join by
dialing a code plus the number for B or C. This assumes that B or C also support Join Call.
The following chart shows how to configure this in the dial peer screen.
*2* is the code. After saving the above configuration, A can dial *2* plus the number for B or C to join B
and Cs call. The prefix can be set to anything the user desires that does not interfere with other dialing rules.
4.3
Redial / Unredial
If B is on a call when A calls, A will get busy tone. If A wants to connect to B as soon as B is available, he
can use the redial function. To use this feature, A dials a prefix and then Bs number.
When the redial function is activated, A will check Bs calling status every 60 seconds. When B is available,
As phone will ring. When A goes off hook, the phone will call B automatically. If A does not want to call
B, the redial function can be cancelled by dialing a prefix plus Bs number.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
*3* is the redial prefix code. A can dial *3* plus Bs phone number to activate the redial function.
*4* is the unredial prefix code. A can dial *4* to cancel the redial function.
The user can select any prefix as long as it does not interfere with dialing rules.
4.4
Click to dial
If User A browses to User Bs phone number or SIP address in the contact page and clicks it, User As phone
will ring. After he goes off hook, the phone will call User B.
NoteThis feature requires that the software on PC or PBX support click to dial.
4.5
Call back
4.6
Auto answer
If this feature is activated, the phone will answer incoming calls after a programmable delay.
4.7
Hotline/Warmline
This feature will cause the phone to place a call to a programmed number whenever it goes off-hook.
different hotline number can be set for each SIP line.
4.8
Speed dial
This feature will allow you make speed dial easily. If you set up speed dial with name and tel numbers for
1~9, and then you can dial n# to make the corresponding speed dial number directly.
4.9
Application
4.9.1
SMS
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Send.
4. To write a new message, press New. Use the 2aB softkey to change the Input Method. After entering
the reply, press OK, use the navigation keys to select the line from which you want to send, and press
Send.
5. To delete a message, press Del. You have three options to choose: Yes, All, No.
4.9.2
Memo
4.9.3
1.
2.
3.
4.
5.
6.
7.
4.9.4
1.
2.
3.
4.
5.
Voice Mail
Ping
Press Menu->Application->Ping->Enter.
Enter the IP Address to be pinged.
Press Start
Display will show Ping IP Address
After approximately 5 seconds, the display will show OK if the ping is successful or Failed is the
ping is unsuccessful.
4.10
The phone has 12 programmable keys which can be set to various functions. The functions are discussed in
the following sections. The default configuration for each key is None which means the key has not been
set for any function.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
4.10.1
Memory Key
3. Press SAVE.
4.10.2
Line
3. Press SAVE.
4.10.3
Key Event
This subtype has many options. They are listed below along with brief explanations.
None
F_MWI Message Waiting
F_DND Do Not Disturb
F_HOLD Hold
F_B_TRANSFER Blind Transfer
F_PBOOK Phonebook
F_REDIAL Redial
F_PICKUP Call Pickup
F_JOIN Join a call
F_AUTOREDIAL Auto Redial On
F_UNAUTOREDIAL Auto Redial Off
F_CFWD Call Forward
F_CALLERS Call List
F_FLASH Flash
F_MEMO Memo
F_HEADSET Activate Headset Mode
F_RELEASE Release Drop call
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
4.10.4
DTMF
4.10.5
URL
4.10.6
None
No function.
Other Functions
5.1
Auto Answer
If this feature is enabled, the phone will answer a ringing line after a specified time.
1. Press Menu ->Features-> Enter->Auto Answer-> Enter.
2. Use UP ARROW or DOWN ARROW to select line.
3. Use LEFT ARROW or RIGHT ARROW to Enable.
4. Use UP ARROW or DOWN ARROW to access time setting.
5. Use keypad to enter time in seconds.
5.2
Auto Handdown
This is the time after a call ends before the phone returns to the idle state.
1. Press Menu ->Features-> Enter->Auto Handdown-> Enter.
2. Use LEFT ARROW or RIGHT ARROW to Enable.
3. Use UP ARROW or DOWN ARROW to access time setting.
4. Use keypad to enter time in minutes.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
5.3
If this function is enabled, the phone will block calls with no Caller ID information.
1. Press Menu ->Features-> Enter->Ban Anonymous Call-> Enter.
2. Choose the SIP Account from which to Ban Anonymous Call.
3. Press OK
4. Use LEFT ARROW or RIGHT ARROW to Enable.
5.4
Ban Outgoing
5.5
Dial Plan
5.6
Dial Peer
5.7
Intercom
5.8
Auto Redial
If Auto Redial is enabled, the phone will continue to retry a busy call. The user sets the retry interval and
the number of times to redial. The user is also given the option to activate this feature on each busy call.
1. Press Menu ->Features-> Enter->Auto Redial-> Enter.
2. Use LEFT ARROW or RIGHT ARROW to Enable.
3. Use UP ARROW or DOWN ARROW to select Interval and Times.
4. Press Save.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
5.9
Call completion
This is similar to Auto Redial except that it detects the state of the called number before making a new call
attempt.
1. Press Menu ->Features-> Enter->Call Completion-> Enter.
2. Use LEFT ARROW or RIGHT ARROW to Enable.
3. Press Save.
5.10
When this function is enabled, ring sound will be passed to a connected headset.
Press Menu ->Features-> Enter-> Headset Ring -> Enter.
5.11
Power Light
This feature enables the power light at the bottom of the phone.
Press Menu ->Features-> Enter->Power LED-> Enter.
5.12
Hide DTMF
This feature sets how DTMF digits are displayed after a call is in progress. For example, dial a PIN code to
access banking information.
1. Press Menu ->Features-> Enter->Hide DTMF-> Enter.
2. Use LEFT ARROW or RIGHT ARROW to select one of the following 4 choices.
a) Disabled All the digits will be shown on the LCD.
b) All None of the digits will be shown on the LCD. The * will be shown.
c) Delay The last digit entered will be shown for a short time and then replaced by *.
d) Last Show The last digit entered will be shown. Previous digits are replaced by *.
5.13
Password Dial
This feature controls the display of dialed digits. When enabled, a password and length can be set.
Example: A call is placed to 6625551212. Password is set to 662 and length is set to 3. Display will show
662***1212.
1. Press Menu ->Features-> Enter->Passwd Dial-> Enter.
2. Use LEFT ARROW or RIGHT ARROW to enable the feature.
3. Use UP ARROW or DOWN ARROW to move to Prefix.
4. Use keypad to enter prefix.
5. Use UP ARROW or DOWN ARROW to move to Length.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
5.14
Pre Dial
If this feature is enabled, digits dialed on-hook will be transmitted when the phone goes off-hook
Press Menu ->Features-> Pre Dial-> Enter.
Basic Setting
6.1
Keyboard
6.2
Screen Settings
6.3
Ring Settings
6.3.1
Ring Volume
www.fanvil.com
Beijing Tel:+86-10-5753-6809
2. Use LEFT ARROW or RIGHT ARROW to select the desired ring volume from the 9 choices. The
phone will ring at the selected volume shortly after it is selected.
3. Press Save.
4. Use BACK or EXIT to return to idle screen.
6.3.2
Ring Type
6.4
1.
2.
3.
4.
Voice Volume
6.5
www.fanvil.com
Beijing Tel:+86-10-5753-6809
6.6
Greeting Words
This feature shows the words displayed in the upper left of the LCD.
PHONE.
Default is VOIP
6.7
1.
2.
3.
4.
Language
Advanced Settings
7.1
General
For all the items in this section, Press Menu->Settings->Enter->Advanced settings->Enter, and then enter the
password. The default password is 123. It can be changed in the web interface.
7.2
Account
This allows configuration of SIP account parameters. After selecting one of the three available accounts,
the following items may be configured.
7.2.1
1.
2.
3.
4.
5.
6.
7.
Basic Settings
www.fanvil.com
Beijing Tel:+86-10-5753-6809
7.2.2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Advanced Settings
7.2.3
Service Code
Sets the codes to be dialed to an IP PBX to enable or disable the following functions.
1. Mode Selects whether or not all these codes are active.
2. DND
3. Always CFW Always Call Forward
4. Busy CFW - Call Forward Busy
5. No Answer CFW - Call Forward No Answer
6. Anonymous
7.3
Network
7.4
Security
www.fanvil.com
Beijing Tel:+86-10-5753-6809
7.5
Maintenance
See Section 8.3.6 for a detailed explanation of each option. It is recommended that these features be
accessed through the web interface.
1. Auto Provision Select DHCP Option, Plug and Play, or Phone Flash for autoprovision.
2. TR069 Enable or disable configuration via TR069.
3. Backup Select Config, Phonebook or none for backup. File name must be entered.
4. Upgrade Select Image, MMI Set, BMF, Ring, Config, or Phonebook for upgrade. File name must be
entered.
7.6
Factory Reset
Web Configuration
8.1
Introduction of configuration
8.1.1
Configuration Methods
There are three methods which can be used to configure this phone:
Phone keypad As discussed in previous sections
Web browser - Recommended way
Telnet with CLI command
8.1.2
Password Configuration
There are two levels of access: root level and general level. A user with root level access can browse and
set all configuration parameters, while a user with general level can set all configuration parameters except
server parameters for SIP or IAX2.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.2
Enter the phones IP address into the address bar of the web browser. This assumes that the pc and the phone
are on the same subnet. Note: Internet Explorer, Firefox, Chrome, or Safari are supported browsers.
If the IP address is not known, it can be displayed on the phones LCD by pressing the Menu->Status.
After entering the IP address, the following screen is displayed.
After configuring the IP phone, remember to click SAVE under the Maintenance tab. If this is not done, the
phone will lose the modifications when it is rebooted.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3
8.3.1
BASIC
8.3.1.1
Status
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Field Name
Network
Accounts
8.3.1.2
Explanation
Shows the configuration information for WAN and LAN port,
including connection mode of WAN port (Static, DHCP, PPPoE),
MAC address, IP address of WAN port and LAN port, DHCP server
status for LAN port (ENABLED or DISABLED).
Shows the phone numbers and registration status for the 6 SIP LINES
and 1 IAX2 server.
Wizard
Select the appropriate network mode. The phone supports three network modes:
1 Static: The parameters of a Static IP connection must be provided by your ISP.
2 DHCP: In this mode, network parameter information will be obtained automatically from a
DHCP server.
3 PPPoE: In this mode, you must enter your ADSL account and password.
Refer to Section 2.2 for detailed information about configuring the network parameters.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.1.2.1
Static IP
If Static IP is selected, this screen will be displayed. Information provided by the ISP should be
entered.
Click Back to return to the Wizard screen. Click Next to go to Quick SIP Settings
8.3.1.2.2
DHCP
After selecting DHCP and clicking NEXT, the Quick SIP Settings screen will appear. Click Back to
return to the Wizard screen. Click Next to go to the Summary screen.
8.3.1.2.3
PPPoE
If PPPoE is selected, this screen will appear. Enter the information provided by the ISP.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Click Back to return to the Wizard screen. Click Next to go to Quick SIP Setting.
8.3.1.2.4
Field Name
Display Name
Server Address
Server Port
Authentication User
Authentication Password
SIP User
Explanation
The name shown in caller ID.
SIP server address either IP address or URI.
SIP server port (usually 5060).
Login name or Authentication ID.
SIP password.
Phone number.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Enable Registration
Submits registration information. Normally checked.
Click Back to return to the IP Address screen. Click Next to see summary screen.
Click Finish button to save settings and reboot. After the reboot, SIP calls can be made.
8.3.1.3
Call Log
Field Name
Start Time
Duration
Dialed Calls
Explanation
Start time of the outgoing call
Duration of the outgoing call.
Account, protocol, and line of the outgoing call.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.1.4
Language
Field name
Language
Greeting Words
Explanation
Set the language of phone. English is default.
The greeting displayed on LCD when phone is idle. It has a
maximum of 12 English characters. Default is VOIP PHONE.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.2
Network
8.3.2.1
WAN Config
Field Name
Active IP Address
Current Subnet Mask
Current IP Gateway
MAC Address
MAC Timestamp
Explanation
The current IP address of the phone.
The current Subnet Mask.
The current Gateway IP address.
The MAC address of the phone.
Time the MAC address was obtained.
WAN Settings
The phone supports three network modes. These are also discussed in Section 2.2.
Static: Network parameters must be entered manually and will not change. All
parameters are provided by the ISP.
DHCP: Network parameters are provided automatically by a DHCP server.
PPPoE: Account and Password must be input manually. These are provided by your
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
ISP.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.2.1.1
Static IP
If Static IP is chosen, the screen below will appear. Enter values provided by the ISP.
8.3.2.1.2
DHCP
If DHCP is chosen, all configuration information will be provided by a DHCP server. Contact the ISP to
determine if DHCP is used.
8.3.2.1.3
PPPoE
If PPPoE is chosen, the screen below will appear. Enter the information provided by the ISP.
Service Name
User
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Password
DSL Password
After entering the new settings, click the APPLY button. The phone will save the new settings and apply
them. If a new IP address was entered for the phone, it must be used to login to the phone after clicking the
APPLY button.
8.3.2.2
LAN Config
Field Name
IP Address
Subnet Mask
DHCP Service
NAT
Port Mirror
Explanation
LAN static IP.
LAN Subnet Mask.
Activate DHCP server for LAN port. The phone must be rebooted
for the DHCP server setting to take effect.
Enable NAT operation
Port Mirror can only be activated in bridge mode. If activated, the
data stream from the WAN port is copied to the LAN port of the
phone.
If Bridge Mode is activated, the phone will not provide an IP address
for the LAN port. Instead, the LAN and WAN will be part of the
same network. If this is activated, clicking Apply, will cause the
phone will reboot.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Note: When LAN IP or bridge mode status is changed, the system will reboot! If bridge
mode is chosen, static LAN configuration will be disabled automatically.
8.3.2.3
The phone supports 802.1Q/P protocol and DiffServ configuration. Use of a Virtual LAN (VLAN) allows
voice and data traffic to be separated.
Chart 1 shows a network switch with no VLAN. Any broadcast frames will be transmitted to all other ports.
For example, and frames broadcast from Port 1 will be sent to Ports 2, 3, and 4.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Chart 2 shows an example with two VLANs indicated by red and blue. In this example, frames broadcast
from Port 1 will only go to Port 2 since Ports 3 and 4 are in a different VLAN. VLANs can be used to
divide a network by restricting the transmission of broadcast frames.
Note: In practice, VLANs are distinguished by the use of VLAN IDs.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Field Name
Explanation
Enable LLDP
Packet Interval
Enable DSCP
SIP DSCP
Audio DSCP
Enable WAN Port VLAN
WAN Port VLAN ID
SIP 802.1P Priority
Audio 8021P Priority
LAN Port VLAN Mode
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.2.4
Range is
Service Port
Field Name
Web Server Type
HTTP Port
HTTPS Port
Telnet Port
RTP Port Range Start
RTP Port Quantity
Explanation
Specify Web Server Type HTTP or HTTPS
Port for web browser access. Default value is 80. To enhance
security, change this from the default. Setting this port to 0 will
disable HTTP access.
Example: The IP address is 192.168.1.70 and the port value is 8090,
the accessing address is http://192.168.1.70:8090.
Port for HTTPS access. Before using https, an https authentication
certification must be downloaded into the phone.
Default value is 443. To enhance security, change this from the
default.
Port for Telnet access. The default is 23.
Set the beginning value for RTP Ports. Ports are dynamically
allocated.
Set the maximum quantity of RTP Ports. The default is 200.
Notes:
1. Any changes made on this page require a reboot to become active.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
2. It is suggested that changes to HTTP Port and Telnet ports be values greater than 1024.
Values less than 1024 are reserved.
3. If the HTTP port is set to 0, HTTP service will be disabled.
8.3.2.5
DHCP SERVICE
Field Name
DHCP Client Table
Leased Table Name
Start IP Address
End IP Address
Subnet Mask
IP Gateway
Explanation
IP-MAC mapping table. If the LAN port of the phone connects to a
device, this table will show its IP and MAC address.
Name of the lease table.
Beginning IP address of the lease table.
Ending IP address of the lease table. A device connected to the
LAN port will get an IP address between Start IP and End IP.
Subnet Mask of the lease table.
Network Gateway of the lease table.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Leased Time
DNS Server Address
Add
DHCP Lease Table
Delete
Enable DNS Relay
Notes:
1. The size of lease table cannot be larger than the quantity of C network IP address. It is
recommended to use the default lease table without modification
2. If the DHCP lease table is modified, the phone must be rebooted.
8.3.2.6
TIME&DATE
Set the time zone and SNTP (Simple Network Time Protocol) server on this page. Daylight savings time
configuration and manual time and date entry are also done on this page
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Field Name
Enable SNTP
Enable DHCP Time
Primary Server
Secondary Server
Time Zone
Resync Period
12 -Hour Clock
Date Format
Explanation
Simple Network Time Protocol (SNTP) Settings
Enable or Disable SNTP
If this is enabled, phone will synchronize time with DHCP server.
IP address of Primary SNTP Server
IP address of Secondary SNTP Server
Local Time Zone
Time between resync to SNTP server. Default is 60 seconds.
If checked, clock is 12 hour mode. If unchecked, 24 hour mode.
Default is 24 hour mode.
Specify the date format. Fourteen different formats are available.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Date Separator
Enable
Offset(minutes)
Month
Week
Day
Hour
Minute
8.3.3
VOIP
8.3.3.1
SIP Configuration
www.fanvil.com
Beijing Tel:+86-10-5753-6809
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Field Name
Explanation
Choose the sip line to configured (SIP 1 SIP 6). Click the dropdown arrow to select the line.
Status
Shows registration status. Will show Registered if registered
or Unapplied if not registered.
Server Address
SIP server IP address or URI.
Server Port
SIP server port. Default is 5060.
Authentication User
SIP account name (Login ID).
Authentication Password SIP registration password.
SIP User
Phone number assigned by VoIP service provider. Phone will not
register if there is no phone number configured.
Display Name
Set the display name. This name is shown on Caller ID.
Enable Registration
Check to submit registration information.
Domain Realm
SIP Domain if different than the SIP Registrar Server.
Proxy Server Address
SIP proxy server IP address or URIThis is normally the same as
the SIP Registrar Server)
Proxy Server Port
SIP Proxy server port. Normally 5060.
Proxy User
SIP Proxy server account.
Proxy Password
SIP Proxy server password.
Backup Server Address
Backup SIP Server Address or URI (This server will be used if the
primary server is unavailable)
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Click on the desired codec to select it. Then use the Left/Right arrow keys to move to the
Enabled or Disabled List. Use the Up/Down arrow to change the priority of enabled codecs.
Advanced SIP Settings
Forward Type
Forward Number
No Ans. Fwd Wait Time
Transfer Timeout
Enable Hotline
Hotline Number
Warm Line Wait Time
SIP Encryption
SIP Encryption Key
RTP Encryption
RTP Encryption Key
Enable Auto Answer
Auto Answer Timeout
Enable Session Timer
Session Timeout
Subscribe For MWI
MWI Number
Subscribe Period
Conference Type
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Conference Number
Registration Expires
Enable Service Code
DND On Code
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Local port
Ring type
Enable Rport
Enable PRACK
Enable Long Contact
Convert URI
Dial Without Registered
Ban Anonymous Call
Enable DNS SRV
Enable Missed Call Log
BLF List Number
Enable BLF List
Server Type
RFC Protocol Edition
Transport Protocol
Anonymous Call Edition
Keep Authentication
Enable GRUU
Enable Displayname
Quote
Enable user=phone
AUTO
Different VoIP Service providers may require different modes.
SIP port. Default is 5060.
Set ring tone. There are 9 standard options and 3 user options.
Enable/Disable support for NAT traversal via RFC3581 (Rport).
Enable or disable SIP PRACK function. Default is OFF. It is
suggested this be used.
Allow more parameters in contact field per RFC 3840
Converts # to %23 when sending URI information.
Allow outgoing calls without registration.
Refuse Anonymous Calls
Enables use of DNS SRV records
If enabled, the phone will save missed calls into the call history
record.
BLF List allows one BLF key to monitor the status of a group.
Multiple BLF lists are supported.
Enable/Disable BLF List
Configures phone for unique requirements of selected server.
Select SIP protocol version RFC3261 or RFC2543. Default is
RFC3261. Used for servers which only support RFC2543.
Set transport protocol TCP, UDP or TLS.
Set privacy support RFC3323, RFC3325 or none
Enable /disable registration with authentication. It will use the
last authentication field which passed authentication by server.
This will decrease the load on the server if enabled.
If enabled phone will respond to incoming calls with only one
codec.
Force the use of TCP protocol to guarantee usability of transport
for SIP messages above 1500 bytes
Enables the use of strict routing. When the phone receives
packets from the serverit will use the source IP address, not the
address in via field.
Support for Globally Routable User-Agent URI (GRUU)
Puts quotation marks around the display-name in SIP messages.
For servers that require this.
Sets user=phone in SIP messages. For compatibility with servers
that require this.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Click to Talk
Respond 182 when Call
waiting
Use VPN
Enable DND
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.3.2
IAX2
Field Name
Status
Server Address
Server Port
Account
Password
Phone Number
Local Port
Explanation
Shows registration status. Will show Registered if registered
or Unapplied if not registered.
IAX2 server address.
IAX2 server port. Default is 4569.
IAX2 account name for registration
IAX2 registration password.
IAX2 phone number (usually the same as IAX2 account name).
IAX2 local port. Default is 4569.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.3.3
STUN Config
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Field Name
STUN NAT Transversal
Server Address
Server Port
Binding Period
SIP Waiting Time
8.3.3.4
Explanation
Shows whether or not STUN NAT Transversal was successful.
STUN Server IP address
STUN Server Port Default is 3478.
STUN blinding period STUN packets are sent at this interval
to keep the NAT mapping active.
Waiting time for SIP. This will vary depending on the
network.
SIP Line Using STUN
Select the Line for use with STUN (SIP 1 - SIP 6)
Enable/Disable STUN on the selected line.
DIAL PEER
This feature allows the user to create rules to make dialing easier. There are several different options for
dial rules. The examples below will show how this can be used.
Example 1: Substitution Assume that it is desired to place a direct IP call to IP address 192.168.119.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Example 2: Substitution To dial a long distance call to Beijing requires dialing area code 010 before the
local phone number. Using this feature 1 can be substituted for 010. For example, to call 62213123 would
only require dialing 162213123 instead of 01062213123.
Example 3: Addition Two examples are shown. In the first case, it is assumed that 0 must be dialed
before any 11 digit number beginning with 13. In the second case, it is assumed that 0 must be dialed
before any 11 digit number beginning with 135, 136, 137, 138, or 139. Two different special characters are
used.
x Matches any single digit that is dialed.
[] Specifies a range of numbers to be matched. It may be a range, a list of ranges separated by commas,
or a list of digits.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Field Name
Phone number
Destination
Port
Alias
Explanation
There are two types of matching: Full Matching or Prefix Matching.
In Full matching, the entire phone number is entered and then
mapped per the Dial Peer rules.
In prefix matching, only part of the number is entered followed by
T. The mapping with then take place whenever these digits are
dialed. Prefix mode supports a maximum of 30 digits.
Set Destination address. This is optional. For a peer to peer call,
enter the destination IP address or domain name. To use a dial rule
on the SIP2 line, enter 0.0.0.2. For SIP3 enter 0.0.0.3
Set the Signaling port, the default is 5060.
Set the Alias. This is the text to be added, replaced, or deleted. It is
optional.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Explanation
Set phone number,
Destination, Alias and Delete
Length.
Phone number is XXXT;
Destination is 255.255.255.255
(0.0.0.2) and Alias is del.
Any phone number that begins
with XXX will be sent via
SIP2 after the first several
digits are deleted depending on
the delete length.
This creates a speed dial
function. Dialing 2, will
cause the entire alias number
to be sent out.
Example
Dial 93333
The SIP2 server will
receive 3333
Dial 8309
The SIP1 server will
receive 07558309
Dial 2
The SIP1 server will
receive 33334444
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.4
Phone
8.3.4.1
AUDIO
Dial 0106228
The SIP1 server will
receive 86106228
Dial 147
The SIP1 server will
receive 1470011
This page configures audio parameters such as voice codec, handset volume, and ringer volume.
Field Name
First Codec
Second Codec
Explanation
The first codec choice: G.711A/u, G.722, G.723, G.729, G.726
The second codec choice: G.711A/u, G.722, G.723, G.729, G.726,
None
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Third Codec
Fourth Codec
Fifth Codec
Sixth codec
Onhook Time
Default Ring Type
Handset Volume
Speakerphone Volume
Headset Ring Volume
Headset Volume
Speaker Ring Volume
G729 Payload Length
Tone Standard
G722 Timestamps
G723.1 Bit Rate
Enable VAD
DTMF Payload Type
Enable MWI Tone
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.4.2
FEATURE
This page configures various features such as Hotline, Call Transfer, Call Waiting,
etc.
Field Name
Do Not Disturb
Enable Call Transfer
Semi-Attended
Transfer
Enable Auto
Handdown
Auto Handdown Time
Enable Auto Redial
Auto Redial Interval
Auto Redial Times
Auto Headset
Explanation
DND might be disabled, phone for all SIP lines, or line for SIP
individually.
If enabled, Call Transfer is allowed.
If enabled, Semi-Attended Transfer is allowed.
If enabled in speakerphone mode, the phone will automatically hang
up and return to idle when the distant party terminates the call. In
handset mode, it will play dial tone instead of returning to idle.
Wait time before the phone performs the Auto Handdown behavior
described above.
If enabled, the phone will automatically redial a call if a busy tone is
received.
Wait time between auto redial attempts in seconds.
Maximum number of auto redial attempts.
Automatically answers call on headset.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Enable Intercom
Enable Intercom Tone
P2P IP Prefix
Enable 3-way
Conference
Accept Any Call
Enable Call
Completion
Enable Pre-Dial
Enable Silent Mode
Hide DTMF
www.fanvil.com
Beijing Tel:+86-10-5753-6809
www.fanvil.com
Beijing Tel:+86-10-5753-6809
entered, the phone will not dial any numbers beginning with 001.
X and x are wildcards which match single digits. For example, if
4xxx or 4XXX is entered, the phone will not dial any 4 digit
numbers beginning with 4. It will dial numbers beginning with 4
which are longer or shorter than 4 digits.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.4.3
DIAL PLAN
[]
www.fanvil.com
Beijing Tel:+86-10-5753-6809
*
.
Tn
8.3.4.4
CONTACT
Enter the name, phone number and ring type for each contact here.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Field Name
Explanation
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Group
Name
Office Number, Mobile
Number, Other Number
Ring Type
Group
Name
Office Number, Mobile
Number, Other Number
Line
Ring Type
Group Setting
Phonebook Tables
Dropdown box to select group
Contact name
Contact phone numbers
Ring type for this contact
Contact group for this contact
Add Contact
Contact name
Contact phone numbers
www.fanvil.com
Beijing Tel:+86-10-5753-6809
-1234xx.
Allowed number lists must end with an entry which is only a .
This will forbid incoming calls from any number except 4119.
8.3.4.5
REMOTE CONTACT
Allows you access to remote contact lists either via XML or LDAP.
TFTP example for remote xml mode: Set the Phonebook Name as Fanvil - Server URL is
tftp://192.168.1.3/admin/phonebook/index.xml.
Remote XML Phonebook Setting
Phonebook Name
Phonebook name displayed on the phone.
Server URL
Server url of the remote phonebook.
SIP Line
SIP line for the remote phonebook.
Authentication
Authentication mode for remote phonebook.
User/password
Authentication username and password.
Display Title
LDAP Setting
The name displayed on the LCD.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Version
Server Address
Server Port
Authentication
Line
Username
Password
Search Base
Enable Calling Search
Telephone
Mobile
Other
Display Name
8.3.4.6
WEB DIAL
This feature allows a call to be initiated by a computer. To place a call, enter the number in the Dial
Number box, select the line in the Line Selection box and press the Dial button. To end the call, press the
Hangup button.
8.3.4.7
Multicast
This feature allows you to make some kind of broadcast call to people who are in multicast group. You can
configure a multicast key on the phone, which allows you to send a Real Time Transport Protocol (RTP)
stream to the pre-configured multicast address(es) without involving SIP signaling. You can also configure
the phone to receive an RTP stream from pre-configured multicast listening address(es) without involving
SIP signaling. You can specify up to 10 multicast listening addresses.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
MCAST Setting
Prority
Enable Page Priority
Name
Host:port
8.3.5
Function Key
The phone has 8 programmable DSS/Function keys with associated LEDs and 4 programmable Line keys
with LEDs. The 4 directional arrow keys and the OK button are also programmable. This screen also sets the
LCD contrast and enables the backlight. For additional DSS/Function buttons, up to 5 C10 Expansion
modules may be connected.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.5.1
Function Keys
Field Name
Contrast
Enable Backlight
Backlight Time
Screen Configuration
Explanation
Set screen contrast
Enable/disable LCD backlight.
Set backlight off time.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Pickup Number
Key
Desktop
Dialer
Calling
Desktop Long Pressed
Field Name
Key
Type
Value
Line
Subtype
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.5.2
Softkeys
Configure the functions performed by the softkeys under the LCD in various phone operating modes.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.5.3
EXT Keys
These are the keys on the C10 Expansion Module. Up to 5 modules may be connected to one phone. The
phone can power one module. Additional modules will require a separate power supply. See the C10
documentation for installation instructions. The keys have the same capabilities as the Function Keys.
8.3.6
Maintenance
8.3.6.1
Auto Provision
The phone supports PnP, DHCP, and Phone Flash to obtain configuration parameters. They will be queried
in the following order when the phone boots.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Field Name
Explanation
Common Config
Version
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Field Name
DHCP Option Setting
Custom DHCP Option
Enable PnP
PnP Server
PnP Port
PnP Transport
PnP Interval
Server Address
Protocol Type
Config File Name
Explanation
The phone supports configuration from Option 43, Option 66, or a
Custom DHCP option. It may also be disabled.
Custom option number. Must be from 128 to 254.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Update Interval
Update Mode
TR069 Settings
Enable TR069
ACS Server Type
ACS Server URL
ACS User
ACS Password
TR069 Auto Login
"Inform" Sending Period
8.3.6.2
Syslog
Syslog is a protocol used to record log messages using a client/server mechanism. The Syslog server
receives the messages from clients, and classifies them based on priority and type. Then these messages will
be written into a log by rules which the administrator has configured. There are 8 levels of debug
information.
Level
0
1
2
3
4
5
6
7
Name
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
Description
System is unusable. This is the highest debug info level.
Action must be taken immediately.
Critical conditions. System is probably working incorrectly.
Error conditions. System may not work correctly.
Warning conditions. System may work correctly but needs attention.
Normal but significant condition.
Normal daily messages.
Debug messages normally used by system designer. This level can
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Syslog Configuration
Field Name
Syslog Settings
Server IP
Server Port
MGR Log Level
SIP Log Level
IAX2 Log Level
Enable Syslog
Web Capture
Start
Stop
Explanation
Syslog server IP address.
Syslog server port.
Set the level of MGR log.
Set the level of SIP log.
Set the level of IAX2 log.
Enable or disable syslog.
Capture a packet stream from the phone. This is normally used to
troubleshoot problems.
Stop capturing the packet stream
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.6.3
Config Setting
Config Setting
Field Name
Save Configuration
Backup Configuration
Clear Configuration
Explanation
Save the current phone configuration. Clicking this saves all
configuration changes and makes them effective immediately.
Save the phone configuration to a txt or xml file. Please note to
Right click on the choice and then choose Save Link As.
Logged in as Admin, this will restore factory default and remove all
configuration information.
Logged in as Guest, this will reset all configuration information
except for VoIP accounts (SIP1-6 and IAX2) and version number.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.6.4
Update
Update
Field Name
Web Update
Explanation
Web Update
Browse to the config file, and press Update to load it to the phone.
Various types of files can be loaded here including firmware, ring
tones, local phonebook and config files in either text or xml format.
TFTP/FTP Update
Server Address
User
Password
File name
www.fanvil.com
Beijing Tel:+86-10-5753-6809
the phone.
Note: The exported config file can be modified. The config file is made up of modules.
Modules which do not need changes may be deleted. For example, a config file can be
downloaded and all modules removed except the SIP module. After rebooting, only the SIP
settings will be changed.
Type
Protocol
Select File
Logo File
Logo File
Logo file in use.
Select File
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.6.5
Access
User accounts can be added or deleted from this page. The authority of accounts can also be changed.
Access Configuration
Field Name
Explanation
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Confirm
8.3.6.6
Reboot
Some configuration modifications require a reboot to become effective. Clicking the Reboot button will
cause the phone to reboot immediately.
Note: Be sure to save the configuration before rebooting.
8.3.7
Security
8.3.7.1
WEB FILTER
WEB Filter
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
The Web filter is used to limit access to the phone. When the web filter is enabled, only the
IP addresses between the start IP and end IP can access the phone.
Field Name
Start IP Address
End IP Address
Add
Enable Web Filter
Apply
Explanation
Beginning IP Address for MMI Filter
Ending IP Address for MMI Filter
Add this filter range to the Web Filter Table
Select to enable MMI Filter.
Make filter settings effective.
8.3.7.2
Firewall
Firewall Configuration
Firewall rules can be used to prevent unauthorized Internet users from accessing private
networks connected to this phone (input rule), or prevent unauthorized devices connected to
this phone from accessing the Internet (output rule). Each rule type supports a maximum of
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
10 items.
Field Name
Enable Input Rules
Enable Output Rules
Input/Output
Deny/Permit
Protocol
Port Range
Src Address
Dest Address
Src Mask
Dest Mask
Explanation
Enable rules limiting access from the Internet.
Enable rules limiting access to the Internet.
Specify if the current rule is input or output.
Specify if the current rule is Deny or Permit.
Filter protocol type (TCP/ UDP/ ICMP/ IP)
Set the filter Port range
Set source address. It can be a single IP address or use * as a wild
card. For example: 192.168.1.14 or *.*.*.14.
Set destination address. It can be a single IP address or use * as a
wild card. For example: 192.168.1.14 or *.*.*.14.
Set the source address mask. For example: 255.255.255.255 points to
one host while 255.255.255.0 points to a C type network.
Set the destination address mask. For example: 255.255.255.255
points to one host while 255.255.255.0 points to a C type network.
When a connected device tries to access 192.168.1.118, the phone will deny the request
because of the out_access rule. Access to any other IP address will be allowed.
Click the Delete button to delete the selected rule.
8.3.7.3
NAT is the process of modifying IP address and port information in transition from a private to a public
network. NAT allows the use of one public address to support many private addresses.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
DMZ Configuration
Servers in a network most vulnerable to attack are those which provide services to users outside the local
network. Many times these computers are placed into their own sub-network to provide more protection to
the rest of the local network. This sub-network is called a DMZ (taken from demilitarized zone).
Computers in the DMZ have limited connectivity to specific hosts in the internal network, although
communication with other hosts in the DMZ and to the external network is allowed. This allows hosts in the
DMZ to provide services to both the internal and external network, while a firewall controls the traffic
between the DMZ servers and the internal network clients.
The following chart describes the network access control of DMZ.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Field Name
IPSec ALG
FTP ALG
Explanation
Enable/Disable IPSec encryption. Default is enabled.
Allow the ALG to securely pass FTP traffic. Default is enabled.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
PPTP ALG
8.3.7.4
VPN
The phone supports remote connection via VPN. It supports both Layer 2 Tunneling Protocol (L2TP) and
OpenVPN protocol. This allows users at remote locations on the public network to make secure
connections to local networks.
Field Name
VPN Status
Explanation
Shows the current VPN IP address.
VPN Mode
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Email: fanvil@fanvil.com
Suzhou Tel: +86-512-6592-0605
SEA Tel: +60-3-203-50737
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Select L2TP. You can choose only one for current state. After you select it, save the
configuration and reboot the phone.
Enable VPN
Enable/Disable VPN.
L2TP
Select Layer 2 Tunneling Protocol
OpenVPN
Select OpenVPN Protocol
Only one protocol may be activated. After the selection is made, the configuration should be
saved and the phone rebooted.
VPN Server Address
Set VPN L2TP Server IP address.
VPN User
Set User Name access to VPN L2TP Server.
VPN Password
Set Password access to VPN L2TP Server.
8.3.7.5
Security
Field Name
Select Security File
Explanation
Update Security File
Browse to the security file to be updated. Click the Update button to
update.
Delete Security File
Select the security file to be deleted. Click the Delete button to
Delete.
Show SIP TLS authentication certificate.
Show HTTPS authentication certificate.
Show OpenVPN File authentication certificate file.
www.fanvil.com
Beijing Tel:+86-10-5753-6809
8.3.8
Logout
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Appendix
9.1
Specification
9.1.1
Hardware
Item
Power Adapter
Specification
Operation Temperature
Relative Humidity
CPU
SDRAM
Input: 100-240V
Output: 5V 1A
10/100Base- T RJ-45 1 PORT
10/100Base- T RJ-45 1 PORT
RJ45 1 PORT
RJ9 1 PORT
Idle: 2.5W
Active: 2.8W
128x64
53.5 x 70mm
040
1065%
Broadcom
16MB
Flash
4MB
Dimension(L x W x H)
Weight
295295175mm
1.5kg
Port
WAN
LAN
EXT
Headset
Power Consumption
LCD Size
9.1.2
Voice Features
www.fanvil.com
Beijing Tel:+86-10-5753-6809
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Call Back
Call control features
Flexible dial plan
Hotline
Anonymous Call Reject
Black List (Reject Authenticated Call)
Approved Caller List
Limit Call
Do Not Disturb
Caller ID
CLIR (reject anonymous call)
CLIP(make anonymous call)
Dial without Registration
Phonebook 500 records
Incoming Calls
Outgoing Calls
Missed Calls
Max of 300 Records Each
Supports vCard/XML/CSV
Support IAX2
4 Programmable Line/DSS keys
8 DSS keys
Programmable Soft Keys
Programmable Function Keys
Code synchronization
IP PBX
IMS
Supports Click to Dial via Web Phone Book
Supports DSS Consoles (5 Max)
Keypad Lock with Emergency Call
Customized LCD logo as screensaver
Ring Tone via Headset or Speaker
Customized Signal Tone Parameters
Time Display
12/24 Hour
Support Daylight Saving Time
Supports Path, Group
Supports SIP Privacy
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Supports MWI
Supports Speed Dial
Supports XML
9.1.3
Network Features
WAN/LAN
Bridge
Bridge with port mirror
Router
Supports PPPoE for xDSL
Supports Basic NAT and NAPT
Supports VLAN
802.1Q
802.1P
Supports STUN
Supports DMZ
Supports VPN
L2TP
OpenVPN
Wan Port Supports Main DNS and Secondary DNS
Supports DNS via DHCP or Static DNS
Supports DHCP client on WAN
Supports DHCP server on LAN
QoS with DiffServ
Network Tools in Telnet Server
Ping
Trace Route
Telnet Client
9.1.4
Firmware Upgrade
POST
HTTP
FTP
TFTP
HTTPS
www.fanvil.com
Beijing Tel:+86-10-5753-6809
Configuration
Web
Telnet
Phone Keypad
Two Account Levels
Multi-Language Support
English
Chinese
Spanish
French
Portuguese
German
Russian
Supports Syslog
Supports Auto Provisioning
Firmware Upgrade
Auto-Provisioning
www.fanvil.com
Beijing Tel:+86-10-5753-6809
9.2
Character
Keypad
1@
2ABC ab c
3DEFdef
Character
7PQRSpqrs
8TUVtuv
9WXYZwxyz
4GHIghi
*/.
5 J K Lj k l
6MNOmno
#/=
www.fanvil.com
Beijing Tel:+86-10-5753-6809