Beruflich Dokumente
Kultur Dokumente
SL96-339/JOF
February 1996
Service Letter
S/K/L50-60-70-80-90MC/MCE
Drain on Fuel Pumps between
Top Cover and Pump Barrel
Dear Sirs,
It has occasionally been reported and observed that the space
between the top cover and the fuel pump barrel, see the
enclosed drawing No. 559646-2.2, pos. 1, has been blocked with
coked heavy fuel oil due to a combination of leaky sealing
rings, pos. 2, and a blocked internal drain, pos. 3.
As a result, the VIT function may be obstructed in its upward
movement with the consequence that engines operating above
approx. 85% load will run with too high a combustion pressure,
because the fuel pump injection timing cannot be retarded.
To eliminate this, it is recommended that a new drain hole be
drilled in the pump housing, as shown on the enclosed drawing
No. 559645-0.1. Furthermore, the old drain hole should be
plugged.
The modification can be introduced on plants in service
provided the specified tolerances are kept, ref. drawing
No. 559645-0.1.
The following procedure is recommended:
1)
First dismantle and clean the fuel pump barrel and suction
valve, and then replace all sealing rings in accordance
with the overhauling instruction in the instruction manual
(Chapter 909-3).
DIESEL SERVICE
Teglholmsgade 41
DK-2450 Copenhagen SV
Telephone: +45 33 85 11 00
Telex: 31197 manbw dk
Telefax: +45 33 85 10 49
E-mail: diesel-service@manbw.dk
PRODUCTION
Teglholmsgade 35
DK-2450 Copenhagen SV
Telephone: +45 33 85 11 00
Telex: 19023 manfw dk
Telex: 19042 manfw dk
Telefax: +45 33 85 10 17
E-mail: manufacturing/copenhagen@manbw.dk
FORWARDING
Teglholmsgade 35
DK-2450 Copenhagen SV
Telephone: +45 33 85 11 00
Telex: 19023 manfw dk
Telex: 19042 manfw dk
Telefax: +45 33 85 10 16
2)
3)
4)
Encl.