Beruflich Dokumente
Kultur Dokumente
Surveying Applications
The first size listed is the downloaded file size and the second size listed is the size
on the calculator.
There are 102 files totaling 5540KB in this category.
Abolladura (details)
5KB/5KB
2000/05/20
3KB/1KB
Simple program to calculate and draw an area. You enter the coordinates and it
calculates and draws the area.
By Tacio Philip Sansonovski (H).
2002/02/07
101KB/20KB
2002/11/14
15KB/5KB
2002/05/21
61KB/11KB
2001/07/11
8KB/15KB
2002/02/24
9KB/4KB
2000/07/28
20KB/5KB
Since a multi-lane highway has not one curve but several, this program reframes
'n' curves that can exist in the highway which you are going to reframe. It is similar
to the previous version, but now it gives the result in pictures, since there are
several curves.
By Charles Salom Nuez.
2003/06/16
2KB/1KB
2000/10/24
31KB/1K
B
Clihp (details)
2003/07/19
9KB/10KB
2000/05/23
5KB/3KB
This program finds the factor of friction "f" in closed pipes to pressure using the
formulates of COLEBROOK-WHITE and Newton-Raphson numeric method.
By John La Torre Esquivel.
2001/07/15
4KB/4KB
Yet another program for determining columns, according to their position in the
structure.
By Charles Salom Nuez.
2003/06/16
2KB/4KB
This program calculates the steel area when supplying the maximum moment, the
geometric characteristics of the rectangular or T beam. It is also good for
calculating flagstones.
By Guilherme Magalhes Almeida.
2001/08/08
20KB/10K
B
2003/06/22
1KB/2KB
Will give the north and east around a boundry, then give the error of closure.
By Benson J. Whitney.
Cross 1.0 (details)
2001/01/17
13KB/2KB
2000/02/03
45KB/3KB
Analysis of a 3-D dimensional block, with Elastic Module and Poisson Coefficient
of a certain material, subjected to triaxial forces.
By Juan Carlos Mark Quiroga.
2003/07/17
51KB/4KB
2003/05/08
3KB/1KB
This program calculates the elements of a spiral curve. You only have to enter the
radius of the circular part, the total deflection, and the length of the spiral.
By Gustavo Adolfo Gomez Calderon (H).
2002/07/14
2KB/4K
B
This is a program for make a mass diagram from the progressives and the cut, fill
and cut-fill areas in each X-section of the alignment. Requires EQSTK and TED
libraries. Use the help file to know the meaning of each number in the principal
library. Made in Bolivia.
By Paul Kenneth Becerra Salmon.
Diseo de Mezcla HYCB 2001 (details)
2002/09/22
110KB/29KB
2001/01/11
3KB/3KB
2002/02/24
2KB/11KB
2001/10/27
38KB/24KB
Complete and detailed library that calculates every component of a wasted water
treatment station.
By Luis Alberto Alonso Vidales.
2001/06/16
9KB/7KB
Uses the finite elements method to solve any flat structure using triangular
elements.
By Alberto Polo Castao.
2002/12/29
4KB/8K
B
2000/10/20
6KB/14KB
Allows one to find the empotramiento moments for the different cases of sections
in beams.
By Herbard Young (H).
2002/02/24
48KB/14KB
This program helps you to find the forces actuating on ditch supports.
By Hctor Bernardo.
2002/11/14
6KB/7KB
Program for the design of stairs. Has options to calculate the Wu, with the
combinations type ACI or the E060 norm of the RNC.
By Charles Salom Nuez.
2003/06/22
25KB/5KB
2001/06/15
28KB/12KB
2002/12/30
29KB/12KB
2002/12/30
5KB/5KB
2003/05/07
5KB/6KB
2003/06/29
223KB/76KB
2002/02/16
129KB/62KB
2002/02/16
121KB/3KB
2000/12/28
(details)
1349KB/23-73KB
2003/05/14
139KB/20KB
Find the arrows and turns for the different cases of loads in beams.
By Herbard Young (H).
2000/12/01
11KB/2KB
Calculates and plots the "cutting flow" (?) (flujo de cortante) diagram in sections
formed by narrow rectangles.
By Alberto Polo Castao.
FoClo 1.0 (details)
2002/12/29
2KB/1KB
This will close the n'th side of an n sided polygon, in HMS format. Angular input
and output is in degrees minutes seconds. Quadrant bearings are not supported.
By Michael Gupton.
2003/05/07
Fractura (details)
13KB/2KB
2000/04/08
7KB/2KB
Program that reduces systems of forces to a given point. It's good for a rigid solid
analysis.
By Juan Pablo Muscari.
GoDi 2.5.1 (details)
2000/10/01
60KB/101KB
2001/11/03
314KB/5KB
2002/01/15
4KB/1KB
2003/07/01
44KB/4
KB
2000/11/03
3KB/1KB
2002/05/22
426KB/37KB
2003/03/06
12KB/4KB
2003/05/07
4KB/4KB
You have various methods to calculate the amount of water or rain over a given
place. Among the methods are: Goodrich, Gumbel, and others.
By Omar E. Garca-Godoy Oliva.
2000/11/03
31KB/21KB
Good program for flow analysis in rectangular, trapezial and circular channels. It
allows one to also solve the critical flow depending on geometry.
By Reynaldo Pulido and Luis Alberto Alonso
Vidales.
Hydraulics Library (details)
2000/11/03
4KB/7KB
Contains a partial flow pipe calculator, a trapezoidal ditch program, and a culvert
analysis program for circular pipes.
By Scott A. Logsdon.
Inerci49 (details)
1999/10/24
8KB/3KB
2000/05/23
139KB/24KB
Allows one to find the moments of inertia for the different cases of sections in
beams.
By Herbard Young (H).
2000/11/25
59KB/65KB
All the material of algebra, physics, chemistry, and calculus corresponding to the
first year of civil engineering at the University of Concepcion, Chile.
By Ruben Daza Barra (RubenHP) (H).
2001/12/22
21KB/2KB
This program carries out a simple interpolation, knowing the bench marks of two
points and distance between them.
By Luis Eduardo Valdivieso Vidal.
Iteracion 1.0 (details)
2003/05/08
3KB/3KB
2003/05/07
4KB/1KB
Gets the Liquid Limit and the Plastic Limit of a certain ground, analysis based on
the 'Grounds Clasification Test'.
By Juan Carlos Mark Quiroga.
2003/08/30
60KB/16KB
2003/03/06
18KB/11K
B
2003/07/19
112KB/7KB
This program gives you the full iteration table of the hardy cross method.
By Roberto Barrenechea.
2002/10/11
3KB/2KB
This is a beta release of the upcoming Mohr program for the 49. Currently it will
calculate principle stresses, aswell as those at a prescribed plane angle. It is also
(I believe) the first program for the 49G to implement Step by Step solutions.
Version 1.0 will include graphical construction of Mohr's circle and element
diagrams.
By Rob Atkinson.
2001/01/07
13KB/8
KB
2002/02/24
6KB/15KB
2003/05/07
79KB/4KB
2003/05/08
30KB/7KB
This program allows you to calculate a geometric leveling of any dimension and to
correct, as well as its against leveling.
By Luis Eduardo Valdivieso Vidal.
P.esp (details)
2003/05/08
2KB/4KB
Calculates solid and dry weight, porosity, and more for soil.
By Luis Alberto Alonso Vidales.
Perdidas en Tuberias (details)
2000/02/24
3KB/4KB
2000/03/18
8KB/6KB
2000/09/09
7KB/10KB
This program is for matrix structural analysis (civil engineering) with 2D structures.
It's a little slow because it's written in User RPL and it has an error detection
routine. You can analyze frames with end offset, inclination of local axes, and
some commands of SAP.
By Eliseo Giraldo Mesa.
2003/06/30
10KB/27KB
2003/02/18
3KB/6KB
2001/06/24
2KB/1KB
Small and fast program which calculates pipe losses with the Prandtl-Colebrook
method.
By Luis Alberto Alonso Vidales.
Propiedades Simbolicas 1.0 (details)
2000/11/18
6KB/1KB
This program is a adaptation for FEM49 to use symbolic inertias and elasticity
modulate.
By Hctor Julio Castillo.
Remanso 1.3 Beta (details)
2003/07/03
16KB/6KB
2000/11/09
103KB/3KB
2003/05/26
20KB/2KB
2003/10/15
32KB/12KB
Calculates the area, center of gravity, moments of inertia and main angle of any
shape.
By Edwin Crdoba (H).
2000/05/13
14KB/3KB
Calculates the static constants (area, center of gravity and moment of inertia) of
flat sections formed by narrow rectangles. Easy to use. Plots the section.
By Alberto Polo Castao.
2002/12/29
191KB/6KB
Cross-section properties program which can calculate properties of elastic crosssections. Also includes a section wizard. Written in System RPL and includes a
comprehensive manual in Word format. Ported to the HP49 by Angelo Cuonzo.
SR2 includes a Spanish HP49 library.
Author unknown.
2003/05/14
138KB/4KB
2002/01/11
318KB/60KB
Gathers the different methods of structural solution, including the Muto method,
Formas de Modo, dynamic analysis and the Osawa method.
By Herbard Young (H).
2002/02/16
2KB/8KB
This small aplication can be used to calculate the allowable stress in steel
columns working under compression loads. It uses the Euler equation for elastic
buckling of columns (slender columns), and for inelastic buckling of columns it use
Engesser's theory.
By Gustavo Adolfo Gomez Calderon (H).
2003/10/15
37KB/2-26KB
2000/12/22
15KB/30KB
Great survey package different from others. Includes total close, point to point
(COGO), level run, and road design.
By J.P. Stewart.
Survey Triangles 1.1 (details)
2002/05/21
4KB/2KB
User RPL triangle directories for the 48G/GX or 49G where angular input and
output is in HMS.
By Michael Gupton.
2001/04/20
30KB/22KB
2002/02/07
4KB/8KB
2003/05/07
6KB/8KB
2000/07/05
10KB/10KB
Excellent library of Topography for new and old student of the matter. This
contains a great variety of program that is of a great use for the university
students of Civil Engineering.
By Francisco A. Saleta C..
2003/08/30
11KB/4KB
2003/05/08
115KB/8-13KB
Structural engineering application which can calculate the following things of any
given truss: member elongations, member normal force, member normal stress,
nodal displacements, and reaction forces. Written in System RPL (includes source
code) with some assembly language and includes a comprehensive manual in
Word format. SR2 includes Spanish HP49 library.
Author unknown.
2003/05/14
42KB/8KB
Three-dimensional analysis of hyperstatic and static truss with the finite element
method.
By Alejo Jimnez Chong (H).
2003/05/08
4KB/1KB
2000/11/03
176KB/24KB
2001/05/18
12KB/14KB
2000/03/08
6KB/3KB
2001/01/07
5KB/4KB
2002/02/24
6KB/8KB
Program for the design of isolated shoes. Makes the design type cuts and verifies
it by punching.
By Charles Salom Nuez.
Zapatas (details)
2003/06/22
3KB/2KB
2000/02/24