Beruflich Dokumente
Kultur Dokumente
Description
The filter element features Palls advanced 0.2 micron rated
polytetrafluoroethylene (PTFE) double-layer membranes,
pleated with very high area into single open-end cartridges.
They are built to withstand demanding in situ steaming
conditions in either the forward or reverse direction.
Even in the presence of high humidity or moisture, often the
case in practice, Emflon PFRW cartridges provide sterile
effluent and validated performance, ensuring process
security. They are the cartridge of choice for critical sterile
gas applications.
Benefits
Materials of Construction
Component
Description
Filter Medium
Support / Drainage
Double-layer PTFE
Polypropylene
Polypropylene
Adaptor
O-ring Seal
Silicone Elastomer
Ethylene Propylene Rubber
Documented quality
Quality
Cartridges produced in a controlled environment
Manufactured according to ISO 9001:2008 certified Quality
Management System
Technical Information
Removal Performance
Nominal Filter Area: 0.8 m2 (8.6 ft2) per 254 mm (10") module
Operating Temperature
20 C (68 F)
80 C (176 F)
12 months to 60 C (140 F)
6 months to 80 C (176 F)
For continuous gas flow above 60 C (140 F), Emflon HTPFRW filters are
recommended. Emflon PFRW can be operated at higher temperatures for
shorter periods.
50
100
150
200
250
300
350
400
450
3b
ar
2b
300
4
200
arg
4b
2
100
1
ar
arg
1b
nt
Ve
400
0
0
200
400
600
800
Steaming Temperature
1.0
0.3
0.5
0.2
125
142
125
142
bard
bard
bard
bard
C
C
C
C
Ordering Information
This information is a guide to the part number structure and possible options.
For availability of specific options and housing details, please contact Pall.
Part Number: AB
PFR
Table 1
W
Table 2
Table 3
(257
(287
(257
(287
F)
F)
F)
F)
For applications requiring autoclaving and sterlization, Pall recommends the use
of Code 2 or Code 7 adaptors to ensure filter sealing after cooling. Cartridges
should be cooled to system operating temperature prior to use. Data shown for
forward steam flow also indicates autoclave resistance.
Length
056
127
254
508
762
1
2
3
6
mm
mm
mm
mm
(5")
(10")
(20")
(30")
Description
H4
Silicone Elastomer
Ethylene Propylene
Rubber
Table 2 : Adaptor
Code
Description
SOE single open end with flat closed end and external
222 o-rings
SOE single open end with fin end, 2 locking tabs and
external 226 o-rings
28
SOE single open end with fin end, 3 locking tabs and
external 222 o-rings
Pall Corporation has offices and plants throughout the world. For Pall representatives
in your area, please go to www.pall.com/contact
foodandbeverage@pall.com
Please contact Pall Corporation to verify that the product conforms to your national
legislation and/or regional regulatory requirements for water and food contact use.
Because of technological developments related to the products, systems, and/or
services described herein, the data and procedures are subject to change without notice.
Please consult your Pall representative or visit www.pall.com to verify that this
information remains valid.
Copyright 2014, Pall Corporation. Pall,
and Emflon are trademarks of Pall Corporation.
Indicates a trademark registered in the USA. Filtration. Separation. Solution.SM is a service mark
of Pall Corporation.
FBPFRWENe
December 2014