Beruflich Dokumente
Kultur Dokumente
Angle Drills
Precision Gear-drive for Minimum
Backlash and Reduced Friction.
AT313B
1964
5116"
AT313LB
"
438"
AT313B Drill Attachment - Flat Head Gear Drive - Straight Offset.
Machined steel housing, recommended drill capacity
1/4", one to one drive ratio, 4 3/8" overall length,
15/16" width, 5 1/16" overall height, 19/64" thick
gear drive body, 3 33/64" centerline distance from
input shaft to output shaft, 27/64" from centerline of
output shaft to end of housing, 1/4" diameter input
shaft, #1/4"-28 female threaded output, high speed
gear drive with anti-friction roller bearings.
AT313LB Drill Attachment - Flat Head Gear Drive - 60 Degree Right Hand Offset.
Machined steel housing, recommended drill capacity
1/4", one to one drive ratio, 3 15/16" overall length,
15/16" width, 5 1/16" overall height, 19/64" thick
gear drive body, centerline distance from input shaft
to output shaft is 3 3/32" by 7/8" of offset, 27/64"
from centerline of output shaft to end of housing, 1/4"
diameter input shaft, #1/4"-28 female threaded output,
high quality gear drive with anti-friction roller bearings.
AT313RB
AT331B
AT313RB Drill Attachment - Flat Head Gear Drive - 60 Degree Left Hand Offset.
Machined steel housing, recommended drill capacity
1/4", one to one drive ratio, 3 15/16" overall length,
15/16" width, 5 1/16" overall height, 19/64" thick
gear drive body, centerline distance from input shaft
to output shaft is 3 3/32" by 7/8" of offset, 27/64"
from centerline of output shaft to end of housing,
1/4" diameter input shaft, #1/4"-28 female threaded
output, high quality gear drive with anti-friction roller
bearings.
AT332A
AT332SC
AT333B
AT332B
12
158
"
7116"
AT336A
AT326B
AT300B
AT300B Drill Attachment - 7 1/16"
Straight Drive - 90 - Degree Head Angle.
Sealed bearings, maintenance free straight drive
drill attachment, recommended drill capacity
5/16", one to one drive ratio, 7 1/16" overall length
includes the 90-degree angle head. 1/4" diameter
input shaft, 1/4"-28 female threaded output head,
1 5/8" head height, 13/16" head width, 13/32"
centerline of output shaft to outside circumference
of head. NSN #5130-01-388-9904.
"
AT302B
AT303B
AT337B
AT327B-24
AT338B
AT339A
WARNING
Note: See Threaded Drills on Page 17.
13
AT589A-.257
AT589A-.2187
Polycarbonate Housing.
AT589AB-.1935
14
AT589EA
AT589CA
AT589DA
AT589DA Flange Lock Drill Bushing.
A hand-held guide to keep #80 (.0135) through
#10 (.1935) drills and taps at a 90-degree angle
to a flat or curved skin surface. Accepts 5/16"
outside diameter bushing. The guide assembly
consists of a polycarbonate housing with steel
liner bushing, with lock-in lug for standard slip
renewable drill bushings.
AT590DBK
WARNING
Airframe tooling can cause flying chips.
Wear safety goggles (user and bystanders).
15
Drill Adaptors
Straight Shank Drill Solutions for Threaded Spindles.
AT503-30
AT503-72
AT503-40
AT503C-1/4
Drill Chuck
AT339EC Chuck-Three Jaw.
1/16" to 1/4" chuck is used with angle drills with
1/4"-28 threaded spindles, allowing the use of
straight shank tools. NSN #5130-01-368-5849
AT339EC
Drill Stops
AT570-40 Drill Stop - #40.
Controls hole depth, cushion the break-through,
unique rounded face prevents chuck jaws from
coming in contact with the skin surface. Unit locks
to drill with a set screws. NSN #5120-01-094-0027
AT570-30
16
Threaded Drills
HSS-LONG 1/4
HSS-SHORT 1/4
HSS-SHORT 1/8
HSS-SHORT 1/8 1/4"-28 Threaded
Shank Drill Bit - 1/8" Diameter.
1/4"-28 threaded shank, 135-degree split point,
1" long (3/4" drill length plus 1/4" nut length).
(Short). NSN #5133-01-546-6313
HSS-STUB 1/8
HSS-STUB 1/8 1/4"-28 Threaded Shank
Drill Bit - 1/8" Diameter.
1/4"-28 threaded shank, 135-degree split point,
1/2" long (3/8" drill length plus 1/8" nut length).
(Stub).
HSS-SHORT 3/16
HSS-SHORT 5/32
HSS-STUB 3/16
HSS-STUB 1/4
WARNING
Airframe tooling can cause flying chips.
Wear safety goggles (user and bystanders).
17
AT518J
AT518ND
18
AT518PB
AT518SD
AT518SC Nut Plate Drill Jig - Corner Type.
Corner wing miniature. High strength spring steel connects the O-1
hardened head to the aluminum knurled handle. A=.281", C=.248",
D=#40, bolt size reference #8. NSN #5130-01-374-1358
AT518SD Nut Plate Drill Jig - Corner Type.
Corner wing miniature. High strength spring steel connects the O-1
hardened head to the aluminum knurled handle. A=.250", C=.191",
D=#40, bolt size reference #10. NSN #5130-01-411-8173
AT518U
AT518T Nut Plate Drill Jig - Corner Type.
Corner wing standard. High strength spring steel connects the O-1
hardened head to the aluminum knurled handle. A=.344", C=.191",
D=#40, bolt size reference #10. NSN #5130-01-368-5871
AT518U Nut Plate Drill Jig - Corner Type.
Corner wing standard. High strength spring steel connects the O-1
hardened head to the aluminum knurled handle. A=.500", C=.248",
D=#40, bolt size reference 1/4". NSN #3465-01-014-9128
AT518TA
AT518TA Nut Plate Drill Jig - Miniature Anchornut Type.
Single lug miniature. High strength spring steel connects the O-1
hardened head to the aluminum knurled handle. A=.250", B=.219",
C=.191", D=#40, bolt size reference #10. NSN #5130-01-513-0149
WARNING
Airframe tooling can cause flying chips.
Wear safety goggles (user and bystanders).
19
Hole Saws
Precision High Speed Steel.
AT413-2 Hole Saw - Fine Tooth.
7/16" Cutting diameter, 5/16"-24 threaded arbor
hole for cutting thin aluminum skins and corrugation
sheets. Use AT415-0 or AT415-1 Arbor.
AT413-2
AT474-15
AT474-26
AT474-22
20
AT415-1
WARNING
Disclaimer:
can cause
chips.and graphics published
Snap-on Specialty Tools has made every effort to ensure the accuracy of the information published in this catalog and onAirframe
our webtooling
site. However,
theflying
documents
Wear safety goggles (user and bystanders).
may contain technical inaccuracies or typographical errors. We make no representations about the suitability of the information and graphics presented. All such documents and graphics
are provided "as is" without warranty of any kind.
77