Sie sind auf Seite 1von 3

RESIDENTIAL & INDUSTRIAL HEAT GENERATOR

TERMOGEN10/40

2015

Handjiev Ltd offers you a device TERMOGEN for heating private and public buildings,
hotels, hospitals, schools, etc., with an area up to 1000 sq.m without heating devices
or the use of hydrocarbon fuels or gas.
This is a unique device that converts electrical energy into heat energy without the use
of heating elements. This appliance is intended for heating water and can be used for
stand-alone systems, water heating, independent ventilation systems and air heating
systems, processes and processes of heat transfer in production.
They have developed a rotary thermal unit (HI) (utility model patent publication
UA76610U 10.01.2013. Bulletin 1), which allows you to receive heat by using water
power, at the same time, by rotation of the induction motor, 50Hz .380 V.
Operation of the system eliminates the use of polluting substances.
Advantages of TERMOGEN
1. Compared with gas or oil burners major advantage is that you need a boiler room, a
large staff and regular maintenance. Compared with electric heating (heating
elements, electric boilers) ITG-37 wins, and who works in the (lack of direct heating
elements), and from the economic point of view. Compared with thermal power plant,
the heat generator is heated to allow each building individually, eliminating the loss of
heat through pipes and does not require repair and maintenance of heating systems.
2. The device is mounted within a few days both outside and inside the premises.
Mount sufficient door width 900 mm. Size, weight and conditions of the conditions of
inclusion allows mounting the device in area just 6 m2
3. The system saves the cost of energy is not less than twice unlike systems operating
on gas and electricity five times.
4. Lack of heating elements allows the use of the set in highly explosive environments;
5. No expensive and not needed long-term investments:
expensive equipment for gas boilers and solid fuel;
for the cost of a month of purchase of fuels;
for the design and construction of buildings with a boiler;
in the delivery of natural gas supply and fuel storage and accessories thereto;
When building a new heating mains and service.
6. Lack of cost and time savings for approval and obtaining permits;
7. Wide range temperature of the coolant (water) (+ 25 + 75) allows the use of the
system in a low-temperature heating mode halls and warehouses.
8. For increasing of the efficiency (25-30%) can be used for the hot water tank,
wherein the hot water (produced during the night) to be collected to.
9. Do not need ecological expertise
10. Low operating pressure of the fluid makes the system durable and safe.
Installation and servicing can be carried out by our experts

inside view

Technical parameters and features


Parameters

Value
10 - 40
67,4
Water
5,5
0,2
1000

Power asynchronous motor, ()


Rated current, ()
Coolant
Productivity (on mode selected) 3/h
Terminal pressure, (MPa) not more
Volume of the coolant (liters) not more
Area/Volume of the heated room (2/3) and keeping an average
temperature of 20 - residential and public buildings

1000/3000

Area/Volume of the heated room (2/3) and keeping an average


temperature of 10-12 - warehouses

1500/8000

heat flow, ccal/h

54000

Water temperature in the heating system ()


Weight, (kg)
Operation Mode
Working Duration of the electric motor, according to the Operation Mode
(%)
TERMOGEN
(electric motor + heat generator + control unit + sensors )

For installation in rooms and heat substations

50
450
autonomous
40-90
Yes

Das könnte Ihnen auch gefallen