Beruflich Dokumente
Kultur Dokumente
SHELL
HAVEN
ETS 608
DOC: No.
Page 1 of 6
Rev B
REV
AMD
DESCRIPTION
DATE
QMS original
Oct 90
CUSTODIAN
PRJ/41/01/RF
CHECKED
PRJ/41/01/DMc
APPROVED
DISTRIBUTION
WARNING
Aug 02
APPROVED
BY
EPC/10/01
CME/00/01
OME/00/06
PRJ/00/01
Aug 04
OME/80/06
SIGN.
MGE/00/01
S. Pain
Jon Mason
M. Ravenscroft
J Mason
M Ravenscroft
All printed hard copies of this computerised ETS document are considered uncontrolled.
This may not be the latest revision - please check the Index before use. ETS 608, Engineering Technical Spec, Pipework,
Pipework - General Requirem ents,
EPC031.608
STANLOW
ENGINEERING TECHNICAL SPECIFICATION
Title :
SHELL
HAVEN
DOC: No.
ETS 608
Page 2 of 6
Rev B
INTRODUCTION
This Engineering Technical Specification (ETS) covers the additional design requirements to
DEP 31.38.01.11 - Gen. (Piping General Requirements - Jan 1998).
1.0
SCOPE
Modifications and additions to DEP 31.38.01.11 - Gen. are listed in Section 2.0.
An introduction to The EC Pressure Equipment Directive 97/23/EC (Directive) /
Regulations 1999 (PED) and the influence on ETS 608 is discussed in section 3.0
2.0
TECHNICAL SPECIFICATION
2.1
2.2
WARNING
All printed hard copies of this computerised ETS document are considered uncontrolled.
This may not be the latest revision - please check the Index before use. ETS 608, Engineering Technical Spec, Pipework,
Pipework - General Requirem ents,
EPC031.608
STANLOW
SHELL
HAVEN
2.3
DOC: No.
Page 3 of 6
ETS 608
Rev B
2.4
2.5
2.6
2.7
2.8
WARNING
All printed hard copies of this computerised ETS document are considered uncontrolled.
This may not be the latest revision - please check the Index before use. ETS 608, Engineering Technical Spec, Pipework,
Pipework - General Requirem ents,
EPC031.608
STANLOW
SHELL
HAVEN
2.9
DOC: No.
Page 4 of 6
ETS 608
Rev B
2.10
2.11
WARNING
All printed hard copies of this computerised ETS document are considered uncontrolled.
This may not be the latest revision - please check the Index before use. ETS 608, Engineering Technical Spec, Pipework,
Pipework - General Requirem ents,
EPC031.608
STANLOW
SHELL
HAVEN
3.0
DOC: No.
Page 5 of 6
ETS 608
Rev B
4.0
APPENDICES
None.
WARNING
All printed hard copies of this computerised ETS document are considered uncontrolled.
This may not be the latest revision - please check the Index before use. ETS 608, Engineering Technical Spec, Pipework,
Pipework - General Requirem ents,
EPC031.608
STANLOW
SHELL
HAVEN
DOC: No.
Page 6 of 6
ETS 608
Rev B
5.0 REFERENCES
ETS 602 Pipework Fabrication, Erection & Testing
ETS 604 Pipework Venting for Hydrocarbon Expansion
DEP 31.38.01.11-Gen Pipework-General Requirements
DEP 31.38.01.31-Gen Shop and field fabrication of piping
DEP 80.45.10.10-Gen Pressure relief, emergency depressuring, flare and vent systems
DEP 80.46.30.11-Gen Interlocking systems for safety/relief valves
S38.042 Standard Drawing Spade Blinds for ANS Flanges
S38.043 Standard Drawing Spacer for Replacement of Spades
EC Pressure Equipment Directive 97/23/EC (Directive) transposed into UK law
by the Pressure Equipment Regulations 1999 SI No 1999/2001 (Regulations)
WARNING
All printed hard copies of this computerised ETS document are considered uncontrolled.
This may not be the latest revision - please check the Index before use. ETS 608, Engineering Technical Spec, Pipework,
Pipework - General Requirem ents,
EPC031.608