Sie sind auf Seite 1von 3

MANAGE THE DHCP SERVER IN

WINDOWS SERVER
2008

Installing the DHCP server in server 2008.

1. Logon the computer server 2008 as administrator.


2. Now right click on the computer and click on manage.
3. Click on the Roles.
4. Click on the Add Role. Click Next to bypass the initial welcome
screen.
5. The select the server roles screen appears. Place a checkmark next to
DHCP Server. Click Next.
6. The introduction to DHCP server screen appears. Read the
information about the DHCP server role and click Next.
7. The specify ipv4 DNS server screen appears. Enter the appropriate
information for your network configuration and click Next.
8. The specify ipv4 wins server settings screen appears. Select the
appropriate configuration for your network and click Next.
9. The Add or edit DHCP scopes screen appears. Click Add to create a
DHCP scope for your network.
10. The add scope screen appears. Enter the appropriate information for
your network configuration ,for example:
• name : (type any name for the scope0
• starting IP address: 192.168.0.1
• ending IP address :192.168.0.254
• subnet mask: 255.255.255.0
• default gateway: (if any )
• subnet type : wired
11. Ensure that there is a checkmark next to Activate this scope, and
then click OK.
12. Click Next. The configure DHCPv6 stateless mode screen appears.
Select Enable DHCPv6 stateless mode and click Next.
13. The specify ipv6 DNS DNS server setting appears. Enter the
appropriate information for your network configuration and click Next.
14. The Authorize DHCP server screen appears. Select Skip
authorization of this DHCP server in AD DS and click Next.
15. The confirm installation selections screen appears. Click Install.

1
Authorize a DHCP server
1. Log on to server computer 2008.
2. Click Start →Programme →Administrative Tools →DHCP.
3. In the console tree, Right-Click DHCP, and then click Manage
Authorize Servers.
4. In manage authorize server dialog box, select Authorize.
5. In the authorize DHCP server dialog box, key the name of ip address
of the DHCP server to be authorized, and then click OK.
6. The computer will list the ip and full computer name then ask for
confirmation. Click OK to continue.

Configure a DHCP server scope


1. Logon to server computer 2008.
2. Click Start →Programme →Administrative Tools →DHCP.
3. To configure an ipv4 DHCP scope, drill down to the server name,
followed by ipv4.
4. Right-Click on IPv4 and select New scope. Click Next to bypass the
initial welcome screen.
5. The scope name screen appears. Enter a name and description for
the DHCP scope and then click Next.
6. The ip address range screen appears. Enter the starting and ending
ip address and the subnet mask for the scope and then click Next.
7. The add exclusions screen appears. Enter any necessary exclusion
and then click Next.
8. The lease duration screen appears. Enter the length of the DHCP
lease and click Next.
9. The configure DHCP options screen appears. Click Yes, I want to
configure this option now and click Next.
10. The router (default gateway) screen spears. Enter the default
gateway for the scope, click Add, and then click Next.
11. The domain name and DNS server screen appears. Enter the DNS
domain and DNS server as appropriate for the scope. Click Next.
12. The wins server screen appears. Enter the wins servers as
appropriate for the scope and then click Next.
13. The Activate scope screen appears. Click Yes, I want to activate
this scope now and then click Next.
14. Click Finish to complete creating the DHCP scope.

2
Configure a DHCP Reservation
1. Logon to server computer 2008.
2. Click Start →Programme →Administrative Tools →DHCP.
3. To configure and ipv4 DHCP scope, drill down to the server name,
followed by ipv4, followed by the scope name, and then expand the
Reservations node.
4. Right-Click the Reservations node and click New Reservation….
5. The New Reservations screen appears. Enter a descriptive name
for the reservation, followed by the desired ip address.
6. Enter the MAC address of the computer that should receive this
reservation, and an optional description.
7. Click Add and then click Close.

Back up and restore the DHCP data base


1. In the DHCP console, in the console tree, select the appropriate
DHCP server.
2. Right-Click the server and click Backup.
3. In the Browse for folder dialog box, select the appropriate folder to
back up to, and then click OK.
4. To restore the DHCP database, Right-Click the server and click
Restore.
5. In the browse for folder dialog box, select the folder where the backup
resides and then click OK.
6. In the DHCP dialog box, click yes to stop and then restart the service.
7. If the status of the service does not update, press F5 to refresh the
DHCP console.

Das könnte Ihnen auch gefallen