Beruflich Dokumente
Kultur Dokumente
Technical data
Technical data AK 95 S
Quick preparation
Power supply
Automatic self-test
Auto-priming
Frequency: 50 to 60 Hz
Treatment simplicity
Pre-settable acetate/bicarbonate fluid
composition
Direct setting of Na + and HCO3Access to all treatment parameters at all
times, monitoring at a glance
Designed for BiCart dialysis
Ultrafiltration control
Automatic switch from isolated UF to
diffusion
Power consumption:
Air detection
Heparin administration
read-out
Water supply
stand 625 mm
Inlet pressure:
Inlet temperature: 5 to 30 C
Quality: Fluid should comply with national
& international standards,
Operating environment
Hygiene
e.g. ANSI/AAMI
Automatic disinfection
Pre-settable for different disinfectants
CleanCart disinfection
Temperature:
Adjustable between 33 to 40 C
Ease of use
One button-One function User Interface
concept for easy handling
Easy calibration, pre-setting and
logging
Computer interface
Height: 1270 mm
Weight: 62-78 kg (depending on options)
Ambient temperature: 18 to 35 C
Air pressure: 70 to 106 kPa (0.7 to 1.06
bar)
Safety
The AK 95 S complies with the following
standards:
IEC 60601-1 General requirements for
safety, Class 1, type B
IEC 60601-1-1 Safety requirements for
medical electrical systems
Ultrafiltration control
Options
Accuracy: 50 ml/h or 1%
UF rate: 0 to 4 l/h
pH probe Kit
pressure-controlled
CleanCart
Gambro Lundia AB
Global Marketing
Box 10101, SE-220 10 Lund
Sweden
Phone +46 46 16 90 00
Fax + 46 46 16 96 97
www.gambro.com