Beruflich Dokumente
Kultur Dokumente
Issued by : EBG - Electrical Systems & Equipment, LARSEN & TOUBRO LIMITED, Powai Works, Mumbai 400 072
Prospect / Retrospect
Visit us at www.LNTEBG.com
FEATURE
ASSEMBLY or,
L on parts taken from these
parts or,
L on samples made of identical
material and having a
representative thickness
Test Procedure
The glow wire is a specified loop
of resistance wire, which is
electrically heated to a specified
temperature. The tip of the glow
wire is brought in contact with a
test specimen for a specific period
of time and a range of
observations and measurements
made, dependent upon the
particular test procedure.
The tip of the glow wire is then
brought slowly into contact with
the test specimen for 30sec +/1sec at a controlled rate of
approach and withdrawal.
The test apparatus shall be so
designed that the glow wire is
kept in a horizontal plane and that
it applies a force of 1.0N +/- 0.2N
to the test specimen during the
application of the glow wire.
The penetration of the tip of the
glow wire in to and through the
test specimen shall be limited to
7mm +/- 0.5 mm.
Acceptance criteria
The specimen is considered to
ABCI
Member
Printed by Printania Offset Pvt. Ltd.,D 20/21, Shalimar Industrial Estate, Matunga (East), Mumbai 400 019. Tel.: 2407 7996/
8866/4540 Fax : 2402 4703 Email: pds6@rediffmail.com The views expressed in this magazine are not necessarily those of the
management of Larsen & Toubro Limited. The contents of this magazine should not be reproduced without the written permission
of the Editor. Not for sale-only for circulation among the customers. Editorial Coordinators : R. S. Mahajan, Neelam D. Kotnis,
EBG-ESE, Powai .