Beruflich Dokumente
Kultur Dokumente
Reliable
Proven
Screw technology
Can be assembled horizontally
on the ground before installation
Composite insulator, low weight
Use:
Suitable for installations in which the
termination must be used as a fixed connection
point and for installations
where there is a risk of continuous
very high creepage currents.
top bolt
Standards:
Meets the requirements of:
SS, IEC and IEEE (see page 8).
Design:
The cable termination consists of
a porcelain or composite insulator
installed on a box body made of Al
castings.
The box body consists partly of
insulating material, which provides
insulated installation. The base part
must be installed on a bracket.
The field control component is a
prefabricated stress cone.
The insulator is filled with synthetic
insulating oil. The insulator has sheds
of the short-long type. The porcelain
insulator can be ordered in brown or grey.
A supporting plate with three stand-off
insulators are used for an insulated
APED 843
mounting.
The maximum permissible diameter
across the sheath of the cable is 85 mm.
The diameter across the prepared insulation
must be 25-66 mm. Maximum cable cross
section is 1200 mm2.
The top bolt with a diameter of 30 mm,
is included in the kit. Select between screw,
press or welding type.
Installation:
Installation can be simplified by assembling
the termination horizontally on the ground
before lifting it into place.
Prepared insulation
25-66 mm
92
insulator
synthetic
insulating oil
stress cone
box body
cable clamp
APED 521
APED 722 P
APED 722
We reserve the right to alter the design and range of our products.
ABB Kabeldon
2006 Edition 1
Technical specification
APED
30
Max 35
18
Creepage
distance
125
All dimensions in mm
167,5
Min 182
234
52
Designation
Voltage
Insulator
kV
APED 360
APED 521
APED 722
APED 843
APED 722 P
ABB Kabeldon
2006 Edition 1
76
32
Attachment to beam
Three 14 mm hole for M10 bolts.
Creepage distance
min
mm
Dimensions
Net weight
mm
kg/item
12-36
52
72
84
Porcelain
Porcelain
Porcelain
Porcelain
915
1340
2200
2635
530
645
925
1040
267
267
267
267
38
43
54
64
72
Composite
2330
1230
270
31
We reserve the right to alter the design and range of our products.
93
14
30
PIU-APED
Post insulator kit for
fixing to a supporting
plate when insulated
installation.
GAP-APED
Rod gap.
Inclination up to 30.
Attachment to beam.
RE-APED-T
Re-assembly kit for APED-T
(for XLPE 25-48.1 mm).
RE-APED-M
Re-assembly kit for APED-M
(for XLPE 48-66 mm).
To be ordered separately:
94
Designation
Description
Use
GAP-APED
Rod gap
PIU-APED
94
RE-APED-M
RE-APED-T
Re-assembly kit
94
JSA
Earthing kit
SCK
Screen connection
We reserve the right to alter the design and range of our products.
See page
94
119
119
ABB Kabeldon
2006 Edition 1