Beruflich Dokumente
Kultur Dokumente
Wardrobe Fittings
Hi - Fold Fittings 200
Des. Reg. no. 205457
Special Features
! Ergonomically designed for overlay sliding shutters, Bottom Guide Track is hidden.
! Manufactured out of durable plastics.
! High precision rolling.
HINGED RUNNER
! Quick release mechanism provided. WITH QUICK RELEASE
! Templates provided for drilling. FOLDING
HINGE
Specifications
Item Code No. Max. Width Max. Weight HINGED GUIDE
of Each of Each WITH QUICK RELEASE
Shutter Shutter
Hi -Fold Fittings HFF 200
5. Fit Hinged Runner with Quick release and Hinged Guide with Quick release to the
far side of second shutter. (Ref. Fig,3A), Using Ø35 mm boring cutter. GUIDE TRACK
6. Screw the Click on / Slip on hinge on to the Mounting plate which is fitted on the
inside of the cabinet. (Ref. Fig.4). * Click-on Hinge or Slip-on Hinge are not included
7. Bring second shutter close to the first shutter (Ref. Fig.5) and push U Pin to engage.
(Ref. Fig.5A).
8. Fold the shutters and engage roller into Runner Track Guide Track by pushing quick
release (Ref.Fig.6) Shutters can also be disengaged by pulling quick release down.
3.0 14.5
32.0
C
4.0 14.0
32.0
4.0
5.0 13.5
Ø + (2 x overlay) / 2
12 deep
Ø35.0
124
Fig. 3 Fig. 3A
2.0
.0
Ø5
32.0
32.0
5.0
Fig. 3B Fig. 4
RUNNER TRACK
GUIDE TRACK
Fig. 5 Fig. 6
125
Hi - Fold Fittings 300
Des. Reg. no. 205457
Special Features
! Ergonomically designed for overlay sliding shutters, Bottom Guide Track is hidden.
! Manufactured out of durable plastics.
! High precision rolling.
! Quick release mechanism provided.
! Templates provided for drilling. FOLDING HINGED RUNNER
HINGE WITH QUICK RELEASE
Specifications
Item Code No. Max. Width Max. Weight HINGED GUIDE
of Each of Each WITH QUICK RELEASE
Shutter Shutter
Hi -Fold Fittings HFF 300
30.0
'A' 'A' 'B' 25.5
31.0 32.0 15.0 1.0 15.5
2.0 15.0 CABINET
64.0 46.0
32.0
C 3.0 14.5
32.0
+ (2 x overlay) / 2
55.0 Min.
12 deep
12 Ø35.0
Ø35.0
126
Fig. 3 Fig. 3A
2.0
.0
Ø5
32.0
5.0 32.0
Fig. 3B Fig. 4
RUNNER TRACK
GUIDE TRACK
Fig. 5 Fig. 6
127
Wardrobe Rail Fittings
Special Features
! These oval wardrobe rail supports are die cast for strength and long life.
! Easy to fit and compatible with a special oval rail.
! Wardrobe rails are available in S.S 304 polished.
! Coat hooks are also available.
! System 32 compatible.
! Rail centre supports are elegantly designed, manufactured out of Zinc alloy for strength and
increasing the load bearing capacity of wardrobe rails.
Specifications
Bracket
Length
Item Code Nos. (mtr) Finish Rail Centre Support
WRF - R1A 1
Rail Aluminium Anodized
WRF - R2A 2
Fitting Instructions
24.0
1. Drill 2 holes on each internal side of wardrobe.
2. First hole should be 24mm from the top internal face of
cabinet and centre distance to be 32mm apart. (Refer fig.1)
32.0
3. Holes should be at equal height.
Fig. 1
128
Wardrobe Lift -Side Mount
Specifications
Fig. 1
Fitting Instructions
1. Screw the Base Bracket to the side wall with the screws provided. (Ref. Fig.1).
2. Insert the Base onto the Base bracket through the track provided in the Base (Ref. Fig.2).
3. Join Main pole with the Hanging pole by using the screw provided. Max. adjustment of
Hanging pole is 240.0 mm (Ref. Fig.3).
4. Fit the Handle to Main pole with the screw provided (Ref. Fig.4).
5. Pull the leg of system down and join with Hanging pole assembly by using End brackets Base
Fig. 2
and screws provided (Ref. Fig.5).
6. Internal cabinet width - 860 (34") Min. & 1100 (43.5") Max.
Max.
240.0 tment
Caution A jus
d
Total
Hanging Pole
1. Fit the Right and Left systems parallel to each other.
2. While pulling the Main pole ensure that it is lying in the middle of the Hanging pole.
Fig. 3
End Bracket
Main pole
with handle
129
Wardrobe Lift -Wall Mount
Special Features
Base plate
! Having twin arm construction for strength.
! Ideal for tall cupboards or shop wall displays.
! Shirts, dresses, suits can easily be pulled
down for easy access or stored conveniently
out of the way.
! Load capability is 10 kgs. max.
Specifications
Fig. 1 Fig. 2
Fitting Instructions
Max.
1. Screw the Base plate to the wall with the screws and wall plugs provided (Ref. Fig.1). 240.0 tment
Adjus
2. Insert the Base onto the Base plate through the track provided in the Base (Ref. Fig.2). Total
Hanging Pole
3. Join Main pole with the Hanging pole by using the screw provided. Max. adjustment of
Hanging pole is 240.0 mm (Ref. Fig.3).
4. Fit the Handle to Main pole with the screw provided (Ref. Fig.4).
5. Pull the leg of Base down and join with Hanging pole assembly by using End brackets
and screws provided (Ref. Fig.5).
Fig. 3
6. Angle adjustment support provided for maintaining the gap from wall (Ref. Fig.6).
Caution
1. Fit the Base parallel to each other.
2. While pulling the Main pole ensure that it is lying in the middle of the Hanging pole.
Main pole
with handle
Fig. 4
130
Trouser & Sari Pullout
Special Features
Specifications
Code No. CR TS 1
Fitting Instructions
Fig. 1
Housing
Fitting Diagram For
Inner slide Trouser And Sari Pullout
FIT RODS
INTO HOLES
(10 Nos)
Base plate
131
Tie & Belt Pullout
Special Features
! Precision ball bearings used for smooth easy movement.
! Rods are manufactured out of SS 304 and have protective
plastic sleeves.
! System 32 compatible.
Specifications
Fig. 1
Code No. CR TB 1
Housing
Fitting Instructions Fitting Diagram For
Inner slide Tie And Belt Pullout
1. Pullout comes in disassembled condition and can be easily
assembled with 2 screws provided to the moving ball bearing
slide, through the holes provided in the housing after aligning
with the inner slide. (Refer fig. 1)
2. Tie & Belt Pullout left hand or right hand screw assembly is
common. (Refer fig. 2) Base plate FRONT VIEW
3. Cabinet internal dimensions required -
Fig. 2
Min. Width = 200 mm, Min. Depth = 520 mm.
Special Features
! Elegantly designed.
! Made out of SS 304.
! Easy to use and fits on the
inside of any cupboard.
! Special Clip provided for prevents the movements of
Holder. (Refer fig.1)
! Also available with Nickle Plated Die cast brackets.
Fig. 1
Specifications
Code No. TH12
132
Tie Rack
62.0
Specifications
Fig.1
Fitting Instructions Side View
1. Screw the base of the Tie rack on the cabinet at the distance of 60 mm from the front edge. (Ref. Fig.1)
2. Min. cabinet internal depth - 500mm.
Trouser Rack
Specifications
133
Wardrobe Latch
Design Reg. No: 191524/03
Special Features
! This special Wardrobe Latch works as an interlock for ! A special cam with interlock prevents the shutters
wardrobes having double shutters. from opening without the lockable shutter being
! It eliminates the need for tower bolts or magnetic catches. opened first.
! Works automatically by just closing the shutters, one at a ! Manufactured out of zinc alloy and chrome plated.
time.
Specifications
Fitting Instructions
1. Easy to fit by refering the drilling diagrams.
2. Lock Housing is fitted at the base of the cupboard. Straight Finger
on lockable
3. Hooked Finger is fitted one shutter and Straight Finger on shutter
the screwed shutter which is the lockable shutter.
4. Always close shutter with Hooked Finger first.
5. Always open shutter with Straight Finger first.
Hooked Finger
Lock Housing
CABINET
42.5
16.5
5.0 SHUTTER CABINET
SHUTTER 1 SHUTTER 2
'A' + 7.0
Caution
1. Strictly follow the fitting instructions to get the best result.
134
Sliding Wardrobe Shutter Fittings
Special Features
! Ideal for cupboards and wardrobes where space is a constraint.
! Weight of shutter should not exceed 35 kgs.
Specifications
Fitting Instructions
1. One set is for one sliding shutters. 30.0
2. Set of two sliding fittings with four wheels, each are fitted on top rack.
(Refer fig.1)
TOP
3. Set of two sliding fittings with one wheel, each are fitted on bottom TRACK 23.0
track. (Refer fig.2)
4. Cavities for sliding fittings are made at the four extreme ends of
shutter. (Refer fig.3).
5. Center distance between two rails should be 40 mm min. (Ref. Fig.4)
IMPORTANT: TO BE ORDERED WITH THE ALUMINIUM RAILS. CODE
NO. SFFA1.
Fig.1
40.0 min.
75.0
50.0 to
le
Preferab
13
.0
15.0
3.0
35.0
12.0
BOTTOM 35.0
TRACK 24.0
135
Notes
136