Beruflich Dokumente
Kultur Dokumente
Home
Windows 7
Privacy
Recommended: Click Here to Scan W indow s For Errors and Performance Issues
Advertisements
Free Download Version www.provisio.com
SiteKiosk turns a PC into a public internet station
w ithin minutes.
This guide works 100% for Vista & Windows 7 unlike most of the guides out there. I have
seen many sites/blogs that have Install Vista from USB guide but either with incomplete
steps or not working guide. I have also seen some guides that dont use proper
commands in this guide. After spending many hours I have come up with this 100%
working guide.
IntoWindows
Downloads
Nero 9 Free Full Version
Download Office 2010 RTM Trial
Kaspersky Internet Security 2011
Nero 10 Free Full Version
Windows Server 2008 R2
Awesome Windows 7 Themes
Join Us On Facebook
I just did this method on one of my friends machine and installed the new Windows 7
BETA. The main advantage is that by using USB drive you will be able to install Windows
7/Vista in just 15 minutes. You can also use this bootable USB drive on friends computer
who doesnt have a DVD optical drive.
IntoWindows on Facebook
Like
The method is very simple and you can use without any hassles. Needless to say that
your motherboard should support USB Boot feature to make use of the bootable USB
drive.
Requirements:
*USB Flash Drive (Minimum 4GB)
F rans
Ubaid Ul RahmanNijar
Kang
C ephas
Phuong
Sahil
Yesudas
Danish
Russ
Advertisements
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and
select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in
the command prompt:
First type DISKPART and hit enter to see the below message.
converted by Web2PDFConvert.com
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB
flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no
is Disk 1.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above
step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Dont close the command prompt as we need to execute one more command at the next
step. Just minimize it.
5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter
of the DVD drive. In this guide I will assume that your DVD drive letter is D and USB
drive letter is H (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type the following command
now:
D: CD BOOT and hit enter.Where D is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR
compatible code.
BOOTSECT.EXE /NT60 H:
converted by Web2PDFConvert.com
Where H is your USB drive letter. Once you enter the above command you will see the
below message.
8. Copy your Windows 7/Vista DVD contents to the USB flash drive.
9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to
change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I wont
explain it as its just the matter the changing the boot priority or enabling the USB boot
option in the BIOS.
Note: If you are not able to boot after following this guide means you havent set the
BIOS priority to USB. If you got any problem in following this guide feel free to ask
questions by leaving comment.
Update: If you find this guide difficult to follow, please use the easy-to-use guide
to create a bootable USB to install Windows 7 using official tool.
22
Tags: Bootable USB, Install Vista/W indows 7 from USB, Install W indows 7, Instlal Vista, USB
Related Posts
How To Use UltraISO Softw are To Create Bootable USB Flash Drive
How To Create Bootable W indow s 7, Vista, or XP USB Flash/Pen Drive Quickly
How To Make Bootable USB
Prevent Unauthorized Use of USB Media Using USB Blocker
Top 10 Things To Remember Before Installing W indow s 7
Windows 8 Features For Windows 7
How to get W indow s 8 Start screen w ith live tiles in W indow s 7
How to get W indow s 8 betta fish boot screen in W indow s 7
How to get W indow s 8 Taskbar user picture tile in W indow s 7
How to get W indow s 8 lock screen and sidebar menu in W indow s 7
How to get W indow s 8 Start screen like home page w eb brow sers
How to get W indow s 8 logon screen date and time in W indow s 7
Useful Guides For Windows 7
14 Excellent W indow s 7 themes
How to make bootable USB
27 Beautiful Vista logon screens
How to install W indow s 7 from USB
Remove Watermark from W indow s 7 desktop
Ads by Google
Windows XP
USB Disk
1146 Comments
1.
Daryl
Posted January 12, 2009 at 1:20 am | Perm alink
Brandon
converted by Web2PDFConvert.com
I dont think XP show s usb drives in list disk, or maybe its just me. Is there any other
alternative to step 4?
3.
tweakwindows
Posted January 12, 2009 at 7:59 am | Perm alink
tweakwindows
Posted January 12, 2009 at 8:01 am | Perm alink
Casmir
Posted January 12, 2009 at 11:31 am | Perm alink
ben
Posted January 12, 2009 at 12:36 pm | Perm alink
i am also trying to do this from xp, and it doesnt w ork, im not sure if step 4 needs to be
done in comand prompt (i formatted the stick in disk manager) but i got stuck on step 7
because there is no such thing as bootsect.exe
7.
neodorian
Posted January 12, 2009 at 1:23 pm | Perm alink
W hen I run bootsect.exe it says that this version isnt compatible w ith my version of
w indow s even though it is running the vista version.
8.
tweakwindows
Posted January 12, 2009 at 1:32 pm | Perm alink
Please use Vista or W indow s 7 as bootsect.exe is not present in XP CD.This guide only
w orks on W indow s Vista & 7
9.
tweakwindows
Posted January 12, 2009 at 1:34 pm | Perm alink
This guide doesnt w ork for XP..Only for Vista and W indow s 7..I have mentioned in the
title of the post.
10.
tweakwindows
Posted January 12, 2009 at 1:35 pm | Perm alink
@ben
Please follow the guide step-by-step and dont skip any step.
11.
Paul
Posted January 12, 2009 at 11:27 pm | Perm alink
?lhan
Posted January 12, 2009 at 11:41 pm | Perm alink
Hey man your methods does not w orking in XP. Please reinform us.
13.
Omar
Posted January 13, 2009 at 4:52 am | Perm alink
I w as doing fine up until step 5. I figured the w hole point of booting from a USB drive
w as to avoid having to burn a disc w ith the W indow s 7 files on it, or install on a PC
w ithout a DVD drive. Anyw ay, I dont have any blank DVDs, so I w as trying to install it
from my USB drive, but I cant get past step 5, since I dont have my W indow s 7 files on
a disc. They are on my hard drive, and my USB drive. Help!
14.
John
Posted January 13, 2009 at 5:00 am | Perm alink
Lincoln
Posted January 13, 2009 at 12:56 pm | Perm alink
OK nevermind I just had to optimise the drive for performance Sorry about that!
16.
EiNS
Posted January 13, 2009 at 1:26 pm | Perm alink
17.
vikrant
Posted January 13, 2009 at 6:12 pm | Perm alink
converted by Web2PDFConvert.com
BlogPiG
Posted January 13, 2009 at 7:41 pm | Perm alink
eden
Posted January 13, 2009 at 9:51 pm | Perm alink
i just formated my usb pen, and done show all files on the DVD and copied the contents
over.
i didnt use the diskpart tools.
installed w 2in 7 fine
20.
Laker_Fan32
Posted January 13, 2009 at 10:57 pm | Perm alink
Leechie!!! THANK YOU SO MUCH FOR YOUR INSTRUCTIONS FOR XP!!!! Wow , I have been
searching for past tw o days and you explained it in 4 steps, you are AW ESOME! Thank
you VERY VERY VERY MUCH!!!
21.
Rkee
Posted January 14, 2009 at 1:52 pm | Perm alink
U can also achieve booting from a usb drive by using daemon tools. Dont mean to dis on
the author graet w alkthrough by the w ay. Its just an alternative, and no need for any
command prompt scripting.
22.
madmax
Posted January 14, 2009 at 4:05 pm | Perm alink
i tried both the XP method and VISTA method. both i managed to do w ithout any
problems. but w hen i try to boot from the pen drive i get this error
file : \Boot\BCD
status : 0xc000000e
info : An error occurred w hile attempting to read the boot configuration
some help please?
23.
Darin
Posted January 14, 2009 at 10:32 pm | Perm alink
Hey, I follow ed all the steps, and everything w orked perfectly until I booted from the Usb
device and tried to install w indow s 7. It said that Setup does not support installation to
disks connected through a USB port. Is there a w ay around this?
24.
tweakwindows
Posted January 15, 2009 at 5:12 am | Perm alink
@Darin
Firstly, let me apologise for the experience youre having.
The error means, your motherboard doesnt support USB booting. I have also mentioned
this in my guide. And there is no w ay to boot USB unless your motherboard support.
@Vikrant
No this guide doesnt for the users w ho like to install W indow s 7 on USB.
@Omar
If you dont have a DVD drive/USB(4GB) then use my guide Installing W indow s 7
w ithout using USB/DVD drive. There are tw o methods, direct and via VPC method.
Please follow my guides.
@All
I am glad that this guide helped you to install W indow s 7.
Thanks.
25.
Joey
Posted January 15, 2009 at 12:16 pm | Perm alink
i dow nloaded w indow s 7 from microsoft and dont have a cd/dvd for it so w hat do i do do
i extract it to the usb then restart using the flash drive or w hat?
26.
tweakwindows
Posted January 15, 2009 at 12:48 pm | Perm alink
@Joey
If you dont have a DVD/USB then use my below guide w hich show s Installing W indow s
7 w ithout using USB/DVD drive
http://w w w .intow indow s.com/installing-w indow s-7-w ithout-using-dvdusb-drive-method2/
http://w w w .intow indow s.com/installing-w indow s-7-w ithout-using-dvdusb-drive-method1/
27.
gabontz
Posted January 15, 2009 at 3:09 pm | Perm alink
converted by Web2PDFConvert.com
pete
Posted January 15, 2009 at 5:13 pm | Perm alink
W hen I try step 7, I get: The system cannot execute the specified program
29.
suavi
Posted January 15, 2009 at 7:42 pm | Perm alink
Bootsect.exe problem!
I think that there is a problem occurs w hen you w ant to install 64 Bit W indow s 7 from
your 32 Bit Vista.
Here is the message after typing BOOTSECT.EXE /NT60 H:
This version of F:boot\bootsect.exe is not compatible w ith the version of W indow s
youre running. Check your computers system information to see w hether you need a
X86 (32-Bit) or X64(64-Bit) version of the program, and then contact the softw are
publisher.
30.
Morty
Posted January 15, 2009 at 11:07 pm | Perm alink
W hat if I w ant to create a x64 boot in a x86 environment? I get this error message. This
version of g:\boot\bootsect.exe is not compatible w ith the version of W indow s youre
running. Check your system information yada yada contact softw are publisher. I am
running Vista 32-bit, trying to create this USB boot thingaby for W indow s 7 64-bit.
Thanks mate.
31.
Nick
Posted January 19, 2009 at 4:27 am | Perm alink
W hen I tried to boot from usb it w ill not even get finished copying the files w hen it gives
me an error code. It sometimes w ill start installing updates. But w hat is w ith this damn
error code. I,m w aiting on it to do it again..Expanding files (0%).
W indow s cannot install required files. Make sure all files required for installation are
available, and restart the installation. Error code: 0x8007045D
I w ould be very grateful for anyones help.
32.
Siddanth
Posted January 19, 2009 at 3:31 pm | Perm alink
Hey tw eakw indow s i think w e need to make use of xcopy command havent tried it for xp
did u try it out /?
33.
Jonathan
Posted January 20, 2009 at 3:12 am | Perm alink
Laker_Fan32
Posted January 21, 2009 at 6:23 pm | Perm alink
My USB becomes Bootable, how ever w hen it is installing it gets stuck at 8% and then
nothing happens??? Ive tried many times and it doesnt seem to w ork, it alw ays gets
stuck at 5% or 8%. Sometimes it errors out w ith the error code: 0x800703ee
35.
PeterNLD
Posted January 22, 2009 at 4:52 am | Perm alink
Can the USB-stick after having W indow s7 installed, be used to get in the complete
recovery enviroment as w ell?
36.
SEO Blog
Posted January 22, 2009 at 2:45 pm | Perm alink
Into Windows(Admin)
Posted January 23, 2009 at 11:49 am | Perm alink
converted by Web2PDFConvert.com
Make sure you copy all the W indow s 7 files to USB correctly.
@Suavi
Basically, I havent tested this method on 64-bit machine. So, I cant find a solution for
you.
Thank you.
Into W indow s
38.
tyson
Posted January 23, 2009 at 2:29 pm | Perm alink
Hi, I read d comments & got confirmed that this method w orks although i didnt try it. I
w ant to install w indow s xp by USB method. Can you also give a method like this for
w indow s xp also?? I am currently running w indow s vista & dont have an optical drive.
39.
Nik Simpson
Posted January 23, 2009 at 4:13 pm | Perm alink
Only one minor issue if you are trying to create a W 7 64-bit bootable drive on a 32 bit
install of Vista. In that case youll have to run the bootsect command from a 32-bit W 7
DVD, because the version on the 64-bit DVD w ill not run on a 32-bit OS.
40.
cdnwood
Posted January 26, 2009 at 9:13 am | Perm alink
Thank you! Absolutely brilliant your guides have been very helpful!! It all w orked just
as you have so thoroughly described.
41.
Fzang
Posted January 26, 2009 at 2:29 pm | Perm alink
Um, couldnt you have skipped step 5 and onw ards? You just need to do the diskpart
and then copy contents of the CD to your USB, at least, thats w hat w orked for me
Also, w hy are you formating to NTFS instead of FAT32?
Just w ondering..
42.
bob Sauve
Posted January 27, 2009 at 11:55 am | Perm alink
Andy
Posted January 28, 2009 at 11:32 pm | Perm alink
Thanks mate for this, very detailed and very user friendly, i tried to install W in xp on my
EEEpc 1000H but for some reason it w ouldnt boot unless i put the USB stick in.lol, its
mad w hen W in 7 is much easier to setup and install than XP.
Anychance of letting me know how to dual boot w ith W indow s 7 and Ubuntu Easy Peasy
?
Thanks mate your a star
44.
Nick1
Posted January 29, 2009 at 2:41 am | Perm alink
Correct me if Im w rong, but step 5 states that w e need a DVD. I use this guide because
I dont have one. Am I right?
45.
cmerg
Posted January 30, 2009 at 4:35 pm | Perm alink
Man
Posted February 2, 2009 at 9:56 pm | Perm alink
Hi.
In the list disk step,I cant see my USB drive. W hats w rong w ith it? (My Operating
System is XP.)
Does it only w ork in Vista?
Thank you for your teaching.
47.
SENTY
Posted February 4, 2009 at 12:29 pm | Perm alink
HEY I HAVE PROBLEM IN THE LAST STEP .. MY DVD ROM IS NOT W ORKING CORRECTLY.I
HAVE IMAGE(NRG) OF W INDOW S VISTA.I LOAD IT USING A IMAGE READER SOFTW ARE
(POW ER ISO),W HEN I TRYING TO EXCUTE THE LAST STEP USING VIRTUAL DVD ROM THAN
THE ORIGINAL DVD ROM,I GOT A EXCEPTION
COULD NOT FIND MAP DRIVE PARTITION TO THE ASSOCIATED VOLUME DEVICE OBJECT:
ACCESS IS DENIED
HOW CAN I SLOW IT ..?,PLS HELP ME .. SND ME MAIL ON MY MAIL ACCOUNT
converted by Web2PDFConvert.com
48.
tweakwindows
Posted February 5, 2009 at 2:15 pm | Perm alink
ELPY
Posted February 5, 2009 at 5:08 pm | Perm alink
Aw esome,Think!!!
50.
asd
Posted February 11, 2009 at 3:44 am | Perm alink
w ell im gonna try this from my phone. hope everything w orks out ok
51.
TY
Posted February 12, 2009 at 4:58 am | Perm alink
About th LIST DISK command, I can not see my USB drive number (As you so the
instruction below ). so how ? i see only my Hard Drive. w hat can i do?? pls help me!!
52.
omg
Posted February 17, 2009 at 8:47 am | Perm alink
Cobrass2
Posted February 25, 2009 at 1:09 am | Perm alink
JD
Posted February 26, 2009 at 3:25 pm | Perm alink
Sjengie
Posted February 27, 2009 at 6:34 pm | Perm alink
Hi, i tried it using my 4Gb microSD but like Darin my HP mini-note 2133 (w hich offers boot
option through USB generic STORAGE DEVICE) boot manager comes w ith an error the
boot selection failed because a required device is inaccesible.
I w orked through all the steps as described above w ithout any errors.
But i notice that diskpart command DETAIL DISK show s that Bootable = No
Si is it bootable yes or no and w hat might have gone w rong?
thx, btw great job this site !!
56.
Sjengie
Posted February 27, 2009 at 7:03 pm | Perm alink
converted by Web2PDFConvert.com
57.
pete
Posted March 2, 2009 at 8:21 pm | Perm alink
Hi ive tried and tried but DISKPART w ont see my usb key, can u help.
58.
ajin
Posted March 3, 2009 at 2:54 pm | Perm alink
hey it is show ing cannot find bootmngr press crl alt del to restart
59.
Anthony
Posted March 5, 2009 at 2:10 am | Perm alink
Great guide. You need to update your requirements section to point out that these
instructions only w ork w hen done on a Vista or W indow s 7 platform, or specifically state
they w ill not w ork on XP
60.
tweakwindows
Posted March 5, 2009 at 7:38 am | Perm alink
tweakwindows
Posted March 5, 2009 at 7:50 am | Perm alink
@ajin
I hope you have follow ed my steps correctly. Try to repair your bootmgr file.
62.
tweakwindows
Posted March 5, 2009 at 7:52 am | Perm alink
Sorry, if you cant find see your USB drive in the DISKPART command, I cant help you.
How ever, if you have only one hard drive, then you can use the 1 as your USB key. But
try this on your ow n risk.
63.
Pinko
Posted March 18, 2009 at 12:26 am | Perm alink
Pinko
Posted March 18, 2009 at 4:22 am | Perm alink
Swanny
Posted April 10, 2009 at 10:25 pm | Perm alink
I have try all the step by step but on the stage command E:\boot>BOOTSECT.EXE /NT60
F:
I got this message Could not map drive partition to the associated volume device
objects:
Access is denied. Any idea w hat w ent w rong. Please help. Thanks.
66.
jickie
Posted April 30, 2009 at 9:44 pm | Perm alink
aw esome guide does exactly w hat it says on the tin, thanks so much im now installing
w indow s 7 on all my mates comps via usb.
67.
Jeff
Posted May 5, 2009 at 3:46 pm | Perm alink
excellent guide. thanks very much. you saved me aged of messing w ith BartPe again
trying to make a bookable installation drive.
thanks.
68.
victor frazee
Posted May 5, 2009 at 11:50 pm | Perm alink
Quan
Posted May 5, 2009 at 11:55 pm | Perm alink
Lets say I have a hdd box w ith 2 partitions (Y, Z), can I use your method to create boot
install for Vista on partition Y and for W indow s 7 on partition Z?
70.
JB
Posted May 10, 2009 at 9:30 am | Perm alink
Brad
Posted May 10, 2009 at 11:15 am | Perm alink
Thanks a lot! Worked no problem. It also fixed the partition tables on my USB key!
72.
Cooper
Posted May 10, 2009 at 10:08 pm | Perm alink
ID
Posted May 13, 2009 at 12:59 am | Perm alink
W hen are the mongs gonna read and understand this guide does not w ork on xp.
74.
Joeypesci
Posted May 13, 2009 at 4:48 am | Perm alink
For everyone having issues w ith diskpart in XP not seeing the USB stick, its because
thats an XP issue. The w ay XP and Vista handles USB drives, Vista sees them in Diskpart
but XP tends not to. There is a reg hack to fix it but I havent bothered to search for it.
75.
Joeypesci
Posted May 13, 2009 at 4:48 am | Perm alink
J
Posted May 13, 2009 at 6:11 pm | Perm alink
Works 100% in my Notebook. I w anted to install Vista Ultimate w ith a 8GB USB Pen and i
made it!
Thanks!
77.
Christopher
Posted May 13, 2009 at 11:02 pm | Perm alink
Iam
Posted May 14, 2009 at 10:37 am | Perm alink
Funny thing I noticed on W in7, w hen you EXIT the DiskPart and try to continue in
Command Prompt, w hile copying the bootsector to device, you may face an error
Access Denied for no priviledge in copying the bootsector to device.
Solution just Exit the Command Prompt and Run it again (still need to Run as
Administrator).
79.
DanielRemains
Posted May 20, 2009 at 9:51 pm | Perm alink
Im sure this is another arrengement w ith MS and USB driver manufactuer to make
money LOL joke
Nice guide I w ill have to steal my girlfriends USB drive (W hich I bought her for christmas
LOL) to try this. Looks like its w orth it thanks
80.
pirater2113
Posted May 21, 2009 at 5:55 am | Perm alink
so if you do this tut correctly on a vista computer then you can use the pen drive on a Xp
computer?
81.
Jay
Posted May 21, 2009 at 9:01 am | Perm alink
Hey Bro can one dual boot using this. ie. Vista and W indow s 7
82.
mads
Posted May 21, 2009 at 8:21 pm | Perm alink
Omer
Posted May 22, 2009 at 2:22 am | Perm alink
Dear,
I w ant to install w indow s 7 RC through USB/Pen drive.
But w hen i open the command prompt and w rite LIST DISK there (after DISKPART), it only
show s my hard drive there, that is DRIVE 0 only, though i try it after inserting USB.
Y is it so?
84.
mike
Posted May 22, 2009 at 7:12 pm | Perm alink
FORMAT FS=NTFS
(Format process may take few seconds)
Yeah lol, its taking a loooong few seconds on my 8GB drive
85.
mike
Posted May 22, 2009 at 7:13 pm | Perm alink
converted by Web2PDFConvert.com
86.
admin
Posted May 22, 2009 at 11:26 pm | Perm alink
@Jay
Yes, you can dual boot.
87.
admin
Posted May 22, 2009 at 11:28 pm | Perm alink
@ pirater2113
You can use this to create bootable USB on Vista and 7 only. If you have created on a
Vista computer then you can use it on a XP computer to boot.
88.
Yue
Posted May 23, 2009 at 4:35 pm | Perm alink
i tried it and it w ont w ork, i am using an old portable hard drive w hich is 5 gb, is it alright
w ith it?
89.
znakistu
Posted May 26, 2009 at 12:34 am | Perm alink
trav
Posted May 27, 2009 at 12:16 pm | Perm alink
anil
Posted May 27, 2009 at 2:00 pm | Perm alink
Tweakwindows
Posted May 28, 2009 at 1:11 am | Perm alink
@Trave
I havent personally tried using SD card. But you should be able to do that.
93.
Tweakwindows
Posted May 28, 2009 at 1:13 am | Perm alink
@All
We are going to close the comments for this post.
94.
JP Jones
Posted May 29, 2009 at 12:35 am | Perm alink
William
Posted May 30, 2009 at 7:19 am | Perm alink
this method from microsoft takes out the last part using bootsect. and it still w orks.
http://technet.microsoft.com/en-us/magazine/dd535816.aspx
96.
Christian Saborio
Posted May 30, 2009 at 9:21 pm | Perm alink
aaraza
Posted May 31, 2009 at 12:40 pm | Perm alink
Hi,
Great guide. How ever, I am stuck after:
bootsect.exe /nt60 h: (h is my usb drive letter)
The message I get is: Could not map drive partitions to the associated volume device
objects: Access is denied.
I follow ed the steps tw ice niow and get the same result. Am I missing something? Would
greatly appreciate any helpI have a netbook dow n and w ould like to put W indow s 7 on
it using a USB stick.
Thanks!
98.
aaraza
Posted May 31, 2009 at 12:44 pm | Perm alink
converted by Web2PDFConvert.com
99.
Saurabh Zagade
Posted May 31, 2009 at 11:11 pm | Perm alink
Ben Charlton
Posted June 2, 2009 at 11:52 am | Perm alink
You can follow my guide to creating a bootable usb disk under w indow s xp then follow
this guide from 5 onw ards.
101.
Giorell
Posted June 4, 2009 at 12:15 pm | Perm alink
I w ant to ask something. Can I return my flash drive back to normal after this? Leave a
tagg on my guest book
or email me rather.
102.
murtaza
Posted June 4, 2009 at 12:30 pm | Perm alink
Hey..hv vista already installed on my pc..need 2 install w in 7 as dual boot..i tried once
dual bootin w ith xp bt resulted into bootin f only xp..cud u pls help me out hw 2 dual
boot w in 7 w id vista
103.
ferris
Posted June 5, 2009 at 10:57 am | Perm alink
Best guide I have ever used Thank you, hats off sir.
104.
Bogdan
Posted June 5, 2009 at 10:48 pm | Perm alink
I find it funny that you say this is a 100% w orking guide but you dont mention that fact
that the W in 7/Vista USB boot drive needs to be created on computer running W indow s
7 or Vista. That should really be added to the Requirements section so you can call your
guide 100% w orking. I seen a few comments from people saying it doesnt w ork
because theyre trying to make the boot drive from w ithin XP.
105.
Bogdan
Posted June 5, 2009 at 10:49 pm | Perm alink
Other than that small piece of missing information, the guid e is great!
106.
Jacob
Posted June 6, 2009 at 8:34 am | Perm alink
trying the F:CD BOOT command (w here F is my DVD drive location), it returns the
follow ing functions
Firstly, from DISKPART (w hich you didnt say to leave, not sure if you meant to or not)
Secondly, from C:\W indow s\System32 (w here your screenshot is taken from)
107.
Jacob
Posted June 6, 2009 at 8:38 am | Perm alink
Mark
Posted June 6, 2009 at 9:40 am | Perm alink
Aw esome w ork! Clear and very simple! For everyone having problems, keep in mind the
guide is only for:
- W indow s 7 installing / not running from an USB drive
- MB w ith USB boot support
Just follow the steps.
Thanks for this guide!
PS:
109.
TSurF
Posted June 6, 2009 at 11:47 am | Perm alink
Shaz
Posted June 7, 2009 at 8:49 pm | Perm alink
converted by Web2PDFConvert.com
Thank a lot. Very useful tutorial I follow ed it all through until I boot through usb and
setup program comes up. W hen I get to, select w hich drive you w ant the installation I
cant select my usb drive it comes up w ith the message below :
W INDOW S CANNOT BE INSTALLED TO THIS DISK. SETUP DOES NOT SUPPORT
CONFIGERATION OF OR INSTALLATION TO DISKS CONNECTED THROUGH A USB OR IEEE
1394 PORT.
I tried 3 different computers and a few new laptops and come up w ith same message. I
read these forums and people successfully installing them, W hat am i doing w rong. Can
you please Help.
Ive been at this for almost 2 w eeks.
I can boot from usb but cant install onto it. I am trying to install vista.
CAN YOU PLEASE HELP.
THANK YOU
111.
admin
Posted June 7, 2009 at 11:14 pm | Perm alink
@Shaz
You cant install W indow s on USB using this guide. You can only use this guide to create
a bootable USB and then use it as installation media.
112.
Shaz
Posted June 7, 2009 at 11:27 pm | Perm alink
Thanks a lot for fast reply. Is there a w ay that I can install vista onto my external hard
drive? if so how is it possible.
Thank you
113.
CMal
Posted June 8, 2009 at 9:41 pm | Perm alink
Julio Bravo
Posted June 9, 2009 at 3:57 pm | Perm alink
It w orks fine, except one problem: w hen I run the w indow s7 64bits RC1
\boot\bootsect.exe in my Vista 32, it doesn`t w ork. I did it running from the \boot folder
of the w indow s7 Beta1 32bits and it is OK.
115.
Laymain
Posted June 9, 2009 at 11:47 pm | Perm alink
If you have a version problem w ith bootsec.exe, just use bootsec.exe from a Vista DVD.
Put back your W indow s 7 after and continue follow ing the guide
116.
Gregor
Posted June 11, 2009 at 12:33 am | Perm alink
Thanks !
117.
xopher
Posted June 11, 2009 at 9:37 am | Perm alink
JakeDK
Posted June 11, 2009 at 4:06 pm | Perm alink
Bernard
Posted June 12, 2009 at 2:15 am | Perm alink
I used this method and created a USB drive for my W indow s 7 installation. Works
flaw lessly! Oh, and the installation of W indow s now takes only 8 minutes.
120.
Brantyr
Posted June 22, 2009 at 3:28 pm | Perm alink
Step 2: dont you guys know if you hit w inkey + R you get the oldschool run box w hich
automatically starts w hatever you run from it w ith admin privledges?
121.
Chris
Posted July 11, 2009 at 9:44 am | Perm alink
To those, like me, that are (w ere) running Vista 32-bit and w anting 7 64-bit:
In step 7, use bootsect.exe from your Vista CD. Barring any other issues, it w ill w ork
perfectly. It did for me.
122.
DaveG
Posted July 11, 2009 at 12:27 pm | Perm alink
Hello, Tw eakW indow s, and thanks, but I know w hat you mentioned about Vista, w hich
I AM using, I used a Sandisk 8GB and w aited half an hour for the formatting process
(hardly a few seconds, but I w asnt surprised, and Id like to know how you get that on a
4GB flash drive), I follow ed each of your steps in order tw ice w hile running an
Administrator command session, w ith positive feedback after each command w as
completed, and then I reordered my BIOS boot priority (w hich had the same effect as
hitting F12, other than F12 not requiring another BIOS session to boot normally from
your hard disk again). Looks like I did everything right, and STILL I cant boot from a
flash drive. I see most others have not had that problem, but I made sure that I did
w hat you said, w ith the right stuff, and still I crashed w ith this error: BOOTMGR NOT
PRESENT (or MISSING, something similar), and that w as after the BOOTMGR.EXE
/NT60 command completed w ith success! I know nothing of boot managers, much less
repairing them, but I sure w ould appreciate a clue (w herever it is)! I am close to
hopelessly frustrated on this, even if this is the best tutorial Ive seen so far, and if I
cant resolve it here I w ill probably give up please help!
123.
DaveG
Posted July 11, 2009 at 8:52 pm | Perm alink
Ohdid I misunderstand that this is for making use of an image file? Is that not how
Vista is normally distributed, on a normal DVD? I am trying to install a modified version of
Vista, distributed by .iso, for tw o very good reasons: 1) Im on a bloatw are diet, and 2)
Im trying to replace w hat I already paid for, after it got w iped (yeah, the w hole freakn
disk), and if you Microsoft pirate hunters have a problem w ith that, then you can go
impale yourselves on your ow n sw ords! To any w ho w ould clue me in on w hat else may
be needed besides the image file (after follow ing the above steps), or explain any nontroll reasons w hy this method w ould not w ork w ith w hat I am trying to do, Id be most
grateful.
124.
Veselin Belchev
Posted July 13, 2009 at 3:36 am | Perm alink
If you have W indow s XP all ready installed just fallow 6. 7. 8. 9. Before this steps format
your USB FLASH drive in NTFS format. Its all ready w orks to W indow s 7 and W indow s
Vista
125.
PCLove
Posted July 13, 2009 at 9:01 pm | Perm alink
On #4 w here the file system is being set, you can use QUICK to speed up the formatting
like this:
FORMAT FS=NTFS QUICK
Its so much faster!
126.
????????
Posted July 15, 2009 at 9:04 pm | Perm alink
Thanks!
This w ould really help me a lot installing on Vaio Type P.
127.
kuld33p
Posted July 19, 2009 at 12:02 am | Perm alink
I am getting a w indow at the installation process to select a driver. I can not go pass
that.. any idea.. I tried to select w indow s/inf folder as w ell.. but no luck.. installation
does not proceed.
128.
JonJon
Posted July 19, 2009 at 3:12 am | Perm alink
Hello, Ive already tried this guide a w eek ago and it w orks. I have w indow s 7 in my hp
mini 2140. But now I w ant to dow ngrade again back to W indow s XP.
Can I use this guide again? but rather than to put the w indow s 7 installation in the usb
it w ould be the w indow s xp? Or should I search another guide for this? I havent tried it
yet. I just w ant to ask here first before I try.
Regards,
129.
konrad
Posted July 19, 2009 at 10:21 pm | Perm alink
admin
Posted July 20, 2009 at 11:06 am | Perm alink
Me
Posted July 20, 2009 at 5:44 pm | Perm alink
Hi,
converted by Web2PDFConvert.com
ive
Posted July 21, 2009 at 2:56 pm | Perm alink
some bios dont recognise NTFS formatted usb keys as boot device, so you might still
w ant to format as FAT32, even if it makes your key slow er
133.
Jean-Sbastien
Posted July 21, 2009 at 8:49 pm | Perm alink
Peter
Posted July 22, 2009 at 8:37 am | Perm alink
Hi Admin,
Quick question- Would this method w ork w ith my Vaio boot disk? instead of a standard
w indow s cd. Thanks in advance.
135.
Mahesh
Posted July 22, 2009 at 7:45 pm | Perm alink
W hen I tried executing LIST DISK in command prompt,I couldnt find my USB drive listed
in.
So I couldnt proceed.
Please guide me
136.
Shom
Posted July 26, 2009 at 7:14 am | Perm alink
admin
Posted July 26, 2009 at 10:28 pm | Perm alink
@Peter
Bootable W indow s DVD or Image is required to make this happen.
138.
Franck
Posted July 27, 2009 at 2:11 pm | Perm alink
For the ones that do not w ant to burn a blank DVD, you can mount the .iso file you
dow nloaded (e.g. using VirtualCloneDrive) and do the copy from there.
W ill give this tutorial a try shortly to get the SevenRC on my X200 (small & great but no
optical drive).
139.
Bernard
Posted July 27, 2009 at 11:58 pm | Perm alink
Hi. I follow ed this guide to make a bootable W indow s 7 usb drive a few w eeks ago, and
it w orked perfectly!
Now I have dow nloaded a new version of W in 7 (The RTM released just recently), and I
w onder if I have to follow this guide from step 1 to remake the bootable drive, or is it
enough for me to erase the content on the flashdrive and then copy from the image, the
last step?
140.
Waqar
Posted July 28, 2009 at 4:03 pm | Perm alink
9shares admin
Posted July 29, 2009 at 9:42 pm | Perm alink
usb drive w ill be not available w hen use diskpart command in w indow s xp. you should
use vista or later versions of w indow s.
142.
Patrick
Posted July 30, 2009 at 3:02 am | Perm alink
all that is necessary is to format your USB and then copy all files from the the cd/dvd(iso
or w hatever) to the device. Then just to be sure to boot from the device via the bios or
boot selection.
143.
Michael
Posted July 30, 2009 at 10:57 am | Perm alink
Has anyone found out a solution to the problem of it sating BOOTMGR not found. Press
ctrl alt dlt to restart w hen trying to boot it. I cant get passed that.
converted by Web2PDFConvert.com
144.
Torpido
Posted July 31, 2009 at 3:09 pm | Perm alink
I have a U3 Softw are on my USB, its basically there for Exploring and locking the USB, if i
copy entire system File(U3) and then paste it back after a format for the purpose of
above guide w ill i be able to still use it the U3, and if yes must i format it back to FAT32?
145.
Mark
Posted July 31, 2009 at 10:06 pm | Perm alink
After trying over and over i finally got it. It w as bringing up my vaio recovery tools, so I
had to take my hdd out of the boot order and it w orked like a charm.
146.
Franck
Posted August 1, 2009 at 2:35 am | Perm alink
I got the install to run on the X200 using the USB, but I had to deal w ith a cannot
create or locate system partition error. That is an error linked to the usage of USB media
and not DVD.
If the USB is first in the BIOS, then the Custom upgrade option simply fails to find the
HDD w here to create the system partition (100MB) I initially w anted a dual-boot of my
Lenovo-Vista, but I had to completely format the drive finally. Once blank, I could put it
first in the BIOS (since not bootable yet) and the system booted on the USB.
From that tricky point, it w ent smoothly. This guide is great.
147.
9shares admin
Posted August 4, 2009 at 9:52 am | Perm alink
nice article..thanks
148.
Yan Li
Posted August 5, 2009 at 3:36 am | Perm alink
Hey, thanks for this great article. Ive used this several times already, since I felt my
original w indow s 7 64-bit w as not to my liking on my new laptop. I found out w hy the
bootmgr is missing message w as show ing after correctly carrying out all the
instructions. I put the W indow s 7 ISO on my usb instead of the folders/files inside the
W indow s 7 ISO/CD!
149.
VladamirTOM
Posted August 7, 2009 at 9:04 pm | Perm alink
Great guide. Worked perfectly thanks a lot. Now I dont have to w orry about finding a
disc drive just for a folding rig.
150.
Kusta
Posted August 8, 2009 at 3:38 am | Perm alink
If you click right, you get properties of the drive any drive and then click format. I
think that w ill short this procedure of formating drive, for those w ho do not like to typing.
151.
Hisham
Posted August 8, 2009 at 6:35 pm | Perm alink
I have a problem here !! someone could help me please ?? W hen Im formatting the USB
Drive and after it finish I got this msg: DiskPart has encountered an error: The
parameter is incorrect.
See the System Event Log for more information. W hats that supose to mean ?? Could
anyone give me the solution please.
152.
Minh Tran
Posted August 8, 2009 at 8:01 pm | Perm alink
Thanks for the guide. Perhaps you should update it w ith Shoms comment(#137). I w as
using a usb stick that formerly had the linux grub loader on it. I w as getting the missing
bootmgr error message until I used the /force /mbr option like Shom suggested.
Also, formatting is very slow I w ould add the QUICK option on the format command.
Although in W indow s 7, I can just right click on my usb drive letter in my computer &
quick format it using NTFS bypassing DISKPART altogether.
153.
Barry
Posted August 9, 2009 at 12:42 am | Perm alink
Nikunj
Posted August 9, 2009 at 6:43 pm | Perm alink
Pali
Posted August 10, 2009 at 2:31 am | Perm alink
Thanks for this guide! Exelent job. Thank you again! Pali from Hungary.
156.
Marleybrit
Posted August 10, 2009 at 11:05 pm | Perm alink
converted by Web2PDFConvert.com
157.
Gaurav Akrani
Posted August 11, 2009 at 6:38 pm | Perm alink
Tried 4 times?
Posted August 13, 2009 at 11:19 pm | Perm alink
Troubles I can boot from the USB stick into the W indow s setup 7 fine. How ever, every
time the computer restarts, it restarts the setup.
So During the next restart I pulled the USB stick out and W indow s started. The setup
picked up w here it left off. The green bar w asnt moving at all though.
So I ran it all again I rebooted (w ith the USB stick plugged in), reformatted the
destination drive, re-ran the full setup, pulled the stick out for the first restart You know
that black screen w here you can choose safe mode or regular mode? There are 2
W indow s 7 options there and every time I repeat the above, it adds another W indow s 7
option.
W hat am I missing??
Thanks for any help.
159.
Tried 4 times?
Posted August 13, 2009 at 11:21 pm | Perm alink
Chris Leiter
Posted August 15, 2009 at 1:59 am | Perm alink
NoR3N
Posted August 15, 2009 at 5:19 am | Perm alink
thx a lot You save me many Hours from searching external dvd drivers Perfect JOB!!!
162.
RnR
Posted August 15, 2009 at 8:37 pm | Perm alink
CK117
Posted August 17, 2009 at 4:20 am | Perm alink
If you have problems w ith the BOOTSECT.exe part, just add /force to the end.
164.
Robert
Posted August 19, 2009 at 11:20 pm | Perm alink
Thanks a bunch for this tute, it has saved me hours of frustration and bad w ords.
I created a USB install and w ill use it tonight on my guinea pig system.
165.
JB
Posted August 20, 2009 at 3:06 am | Perm alink
JONNYK
Posted August 21, 2009 at 3:01 pm | Perm alink
converted by Web2PDFConvert.com
Go to device manager and go to properties and select policies, and select the better
Performance the bottom one for you to use the BOOTSEC.EXE part.
You might have to reboot.
I also suggest you use KILL U3 utility for san disk.
167.
Mindslight
Posted August 22, 2009 at 11:42 pm | Perm alink
Thanks !
Johannes from France
168.
Josh
Posted August 25, 2009 at 4:57 am | Perm alink
Excellent stuff. I tried follow ing other sites instructions only to find they didnt even
create the boot sector. This w orked like a charm. Thanks!
169.
Anonyme
Posted August 26, 2009 at 9:50 pm | Perm alink
rockystuud
Posted August 28, 2009 at 12:35 am | Perm alink
Hi ! Thanks. It w orks fine . Thanks a lot for your effort and clear instructions.
171.
jiji
Posted August 30, 2009 at 1:59 am | Perm alink
FORMAT FS=NTFS
(Format process may take few seconds)
This is bad . Very bad.
It doesnt take few seconds.
It does take very many seconds.
Formatting quick is much faster and enough (I already did to this stick tw o times before)
.
Please correct.
172.
David Amison
Posted August 30, 2009 at 6:45 pm | Perm alink
YASEEN
Posted Septem ber 4, 2009 at 8:13 pm | Perm alink
AW ESOME!!!
174.
vagothcpp
Posted Septem ber 5, 2009 at 9:22 am | Perm alink
Harris
Posted Septem ber 7, 2009 at 10:30 am | Perm alink
thanks bro..
176.
JHANU
Posted Septem ber 10, 2009 at 12:34 pm | Perm alink
Dan Berger
Posted Septem ber 12, 2009 at 8:27 am | Perm alink
For those of having the 32/64 bit problem, just follow the beginning of the guide and
after you finish formating, copy & paste (drag and drop) the contents of the dvd (w hich
you can virtually mount on your hdd) onto the usb stick. it w ill be bootable and w ill w ork!
178.
Zak
Posted Septem ber 12, 2009 at 12:54 pm | Perm alink
e
Posted Septem ber 12, 2009 at 11:38 pm | Perm alink
klokluider
Posted Septem ber 22, 2009 at 1:07 pm | Perm alink
converted by Web2PDFConvert.com
Malone
Posted Septem ber 27, 2009 at 2:48 pm | Perm alink
Simran
Posted Septem ber 28, 2009 at 9:38 pm | Perm alink
I have installed w indow s seven using the method provided by you but I am not able to
play my pen drive in my car CD player. I mean w hen I try to play songs in my car, it do not
w ork now . Please give a solution.
183.
Malone
Posted Septem ber 29, 2009 at 11:08 pm | Perm alink
@Simran
Format, and w rite songs again on it.
FAT32 w ill be OK.
184.
acme
Posted Septem ber 30, 2009 at 4:12 am | Perm alink
do you have to copy the entire contents of the w in7 disk? my thumbdrive isnt that big.
185.
jj
Posted Septem ber 30, 2009 at 10:46 am | Perm alink
D:\boot>bootsect.exe /NT60 H:
Target volumes w ill be updated w ith BOOTMGR compatible bootcode.
Could not map drive partitions to the associated volume device objects:
D:\boot>
Any suggestions?
186.
cj
Posted Septem ber 30, 2009 at 11:20 am | Perm alink
i w ill tell you one thing,this is the first advice i have gotten from that internet that w orks
perfectly,i w anted to upgrade my pc to 7 so i formated my vista not know ing that my cd
rom w as messed,so i w as running out of options to install 7 until i saw this and i saw all
the instryctions carefully,here i am w ith my pc typing this and my pc is perfectly in
shape,thank you very much,you are a saviour
187.
admin
Posted Septem ber 30, 2009 at 11:22 am | Perm alink
@Acme
converted by Web2PDFConvert.com
Yup. You need to copy all the contents you your thumbdrive.
188.
Faisal
Posted O ctober 3, 2009 at 8:08 pm | Perm alink
good job. my laptop dont have DVD drive. Thanks for the post
189.
widL
Posted O ctober 13, 2009 at 2:31 am | Perm alink
vietha
Posted O ctober 13, 2009 at 6:56 pm | Perm alink
Scott L
Posted O ctober 14, 2009 at 4:51 pm | Perm alink
I w ould just like to let anyone and everyone in here know that I specifically follow ed this
guide yesterday for XP and it w orked.
http://w w w .liliputing.com/2008/04/install-w indow s-xp-on-mini-note-usb.html
Since the comments here are confusing : NOTE this guide is not to create a W in 7 USB
stick under XP but to actually make a W indow s XP stick under W indow s XP to install XP, it
w orked for me and seemed to have the least amount of fiddling.
- Enjoy.
192.
licitatii
Posted O ctober 14, 2009 at 5:05 pm | Perm alink
very nice tutorial but please help me. Everithing w orks w ell but w hen its go to drive
option(w here you format you disk) it ask about a device driver to load and install
?????? W hat to do? setup cannot continue
193.
marvin carter
Posted O ctober 15, 2009 at 9:02 am | Perm alink
you most do these commands in w indow s safe mode to avoid the Access denied
message.
194.
Martin
Posted O ctober 17, 2009 at 12:31 am | Perm alink
Hello,
I have the folders for W indow s 7, and I w ant to burn a DVD to install from (I need to
format my PC, so I cant just install from w ithin XP). How ever, I cant just burn the files to
the DVD, cus then it w ont let me boot from it.
Any ideas on how to do just that? How do I make it bootable?
195.
Jackson
Posted O ctober 17, 2009 at 4:25 am | Perm alink
So.. can I still used the usb drive after this? Can I reformat it to fat32?
196.
Zaino
Posted O ctober 19, 2009 at 1:50 pm | Perm alink
hey really great guys, but i couldnt show my usb drive in step LIST DISK only the local
drivers
please help.
197.
mugurelu
Posted O ctober 19, 2009 at 2:16 pm | Perm alink
admin
Posted O ctober 19, 2009 at 4:25 pm | Perm alink
@ mugurelu
Since you are going to create a bootable drive, you need to format the drive completely.
So, you cant use just one partition. And about external drive, it should w ork fine (I have
tested on flash drives only).
199.
admin
Posted O ctober 19, 2009 at 4:30 pm | Perm alink
@ Jackson
You should be able to format it w ith FAT 32 or NTFS.
200.
ceeque
Posted O ctober 20, 2009 at 3:12 am | Perm alink
simply does not w ork. One of the main reasons being is you have typed out the
commands in the text differently to w hat you have input into the command screen, you
have ommitted the spaces in your text yet placed spaces in the command prompt, and
even after correcting those errors all you get is:bootsect.exe is not recognised as an
converted by Web2PDFConvert.com
Vandit
Posted O ctober 20, 2009 at 8:27 am | Perm alink
Andy Mac
Posted O ctober 21, 2009 at 5:02 pm | Perm alink
JM
Posted O ctober 23, 2009 at 2:10 am | Perm alink
Anasazi
Posted O ctober 23, 2009 at 4:36 am | Perm alink
I just tried to install w in7 using this guide but w hen I tried to boot from the usb drive it
said bootmgr is missing. But I did every step here and the bootsect command w as
successful.
205.
Raul
Posted O ctober 24, 2009 at 2:32 pm | Perm alink
Zack
Posted O ctober 25, 2009 at 12:39 am | Perm alink
Hello, If you are running W indow s 7 already you can just go into Computer and then
format it like you regularly w ould format a usb drive as NFTS. It saves quite a bit of time
and basically cuts this process in half.
207.
Xerxz
Posted O ctober 25, 2009 at 5:11 am | Perm alink
W hat if i dont have the cd and i just have the files on my pc w hat do i do then??? any
help w ould be much appreciated.
208.
admin
Posted O ctober 25, 2009 at 11:53 am | Perm alink
If you have W indow s 7 ISO, you need to extract it first to a folder and then to the USB.
209.
CHINMAY
Posted O ctober 26, 2009 at 7:19 pm | Perm alink
John
Posted O ctober 28, 2009 at 8:52 pm | Perm alink
Ralph R
Posted O ctober 29, 2009 at 3:16 am | Perm alink
I w as successful in follow ing your instructions, that is after I initially screw ed up and
selected my slave HD as though it w ere the flash drive. My question here w ould thyen
be; Is there a w ay for me to restore the partition and data on the slave that I
inadvertently cleaned and partially formatted? I know , you need not say it: I am an idiot!
212.
Ralph R
Posted O ctober 29, 2009 at 3:19 am | Perm alink
I w as successful in follow ing your instructions, that is after I initially screw ed up and
selected my slave HD as though it w ere the flash drive. My question here w ould thyen
be; Is there a w ay for me to restore the partition and data on the slave that I
inadvertently cleaned and partially formatted? I know , you need not say it: I am an idiot!
213.
Doron
Posted Novem ber 2, 2009 at 5:44 pm | Perm alink
214.
WiZoOo
Posted Novem ber 6, 2009 at 2:19 am | Perm alink
aw esome guide, w orks for me w ith w in 7 oem bie final x86. thanks alot dude!
215.
tristian o'brien
Posted Novem ber 6, 2009 at 4:28 am | Perm alink
nice one, thanks.. the BOOTSECT command made my usb drive become a viable source
to install W indow s 7 on an Asus EEE Pc.
216.
Diptiman
Posted Novem ber 6, 2009 at 11:50 am | Perm alink
Its not that cool dear. I am trying to do the same(i mean using bootsect.exe) from Vista.
Still there is a problem saying Your version of bootsect.exe is not compatible w ith the
current version of w indow s. Please suggest.
Thanks
217.
admin
Posted Novem ber 7, 2009 at 12:02 am | Perm alink
@ Diptiman
If you trying to create a W indow s 7 or Vista on Vista/7 you should not face any such
problems. And if you trying to create a bootable USB of Vista/XP/7 on XP, you w ill see
error.
218.
Eugene Ishchenko
Posted Novem ber 9, 2009 at 12:44 am | Perm alink
Thank you for this w onderfull solution. Its easy and w orked for me.
219.
Alex
Posted Novem ber 10, 2009 at 3:24 am | Perm alink
Michael
Posted Novem ber 10, 2009 at 6:32 pm | Perm alink
Hi there,
for all the people having problems at step 6 try this
6. Type in the cmd w indow CD/DVD DRIVE LETTER: and press enter i.e.
D:
Then Type CD BOOT and press enter
Then proceed w ith step 7
Hope this helps
221.
Tomasz
Posted Novem ber 12, 2009 at 4:24 am | Perm alink
I did EXACTLY as it says and my netbook doesnt w anna boot from USBI checked BIOS
settings couple of times and it is set to boot from removable devicew hich is correct I
guessno idea w hat to do
222.
Tomasz
Posted Novem ber 12, 2009 at 4:43 am | Perm alink
OK I found it.w hen EEE PC starts you need to press ESC key in case to display BOOT
DEVICE SELECTION menu
223.
Chase
Posted Novem ber 12, 2009 at 5:17 am | Perm alink
For those having problems w ith access is denied during the bootsect command, be
sure to open cmd exactly as mentioned in the instructions. I assumed that being logged
on as an administrator or using /runas w as sufficient, but I guess things are different in
Vista/W indow s 7.
224.
hicom5
Posted Novem ber 14, 2009 at 6:42 pm | Perm alink
problem:
Could not map drive partitions to the associated volume
device objects: Access is denied.
answ er:
C:\W indow s\System32\cmd.exe
On the pop-up right click context menu, select
Run as Administrator
225.
Jason
Posted Novem ber 14, 2009 at 7:07 pm | Perm alink
100% w orking confirmed! Thanks for the tutorial it w as easy, and accurate.
226.
Navster
converted by Web2PDFConvert.com
NICERED
Posted Novem ber 17, 2009 at 12:57 pm | Perm alink
Any method to know your w in7 and vista compatibility (x64, x86) before installing
w in7?
228.
Euphie
Posted Novem ber 18, 2009 at 9:53 am | Perm alink
admin
Posted Novem ber 18, 2009 at 5:53 pm | Perm alink
@Nicered
You can use official W indow s 7 upgrade advisor (its free) tool to check compatibility
issues. Here is the link:
http://w w w .intow indow s.com/test-your-pc-softw are-compatibility-w ith-w indow s-7-usingw indow s-7-upgrade-advisor-final/
230.
Lurvinzy Andrew
Posted Novem ber 23, 2009 at 7:32 pm | Perm alink
Hi~ Thanks for the tutorial currently copying the files hope it w orks!
231.
ahmed
Posted Novem ber 24, 2009 at 6:46 am | Perm alink
I LOVE YOU!!!
my cd drive doent w ork so USB w as the only option.
GREAT TUTORIAL!!!
232.
Andrew J. COwell
Posted Novem ber 25, 2009 at 4:08 am | Perm alink
dsfjdifja
Posted Novem ber 29, 2009 at 7:35 pm | Perm alink
w hy do all this w hen you can just make virtual cd drive and boot from it? 2 minutes w ork
lol.
234.
Please Help me !
Posted Novem ber 29, 2009 at 11:49 pm | Perm alink
Hi,
Please help !!! Here w hat I have done:
1.Dow nload W indow s 7 iso file,w hich I put it in isoBuster and extracted.
2.Coz I have listen it is better to make clean instalation,I bought new W D external HDDPassport Studio 500 Gb and put it all information from my PC to HDD (around 90Gb very
important data + w indow s 7 of course)!
3.I run cmd and get in DOS
- diskpart
- list disk
(coz there w ere nothing,not disk 1,2,3-i just select disk 1-don`t ask me w hy,coz i don`t
know for myself,coz i am stupid!!!)
- select disk 1
- clean
After i w rote clean,I discconect usb cable,coz I afraid-w hat does clean means!!??
For god sake-i have all informations from last 6 years on my external hard disk
Now ,my W D doesn`t w ork,everything is ok in drive manager,w hen i conecct usb cable
there is the external usb hard drive show ed up on the Safely Remove Hardw are list right
dow n,but I can not enter into the disk-inside and I am so affraid and desperate and
don`t know w hat to do
How you can see,I am bigginer,but please tell me w hat is the best solution for me to do
now and to don`t lose my data on W D (if i already didn`t lost
Please,please help-w ith days I don`t know w hat to do.
My e-mail is via_makedonia yahoo dot com please w rite me there.
W hat I have tried:
coneccting my W D w ith 3 dieferent cables-usb and firew ire in dieferent ports.
installing drivers from w d site
W hen I check Device Manager it show s that the device is installed and w orking properly
but it w ill not show in my computer and I cant access it.
before the problem,my HDD appeard as drive H:
I w ouldnt be half as frustrated if it hadnt been w orking properly before this.Plus-ALL
data is on my HDD,and I don`t even know if it is still there
I do it this:
2 Step Solution for XP users:
Part 1:
Go to
Control panel -> Performance and Maintenance (cannot be in classic view to see this link)
-> Administrator Tools -> Services -> Universal Plug and Play
If Universal Plug and Play is set to manual sw itch to automatic.
Part 2
Double Click Safely Remove icon on the bottom right-> Select device->click Properties ->
converted by Web2PDFConvert.com
click Volumes -> click Populate -> hit OK -> if nothing show s it may need to be formatted
Also i w as in DISK MANAGEMENT,but except formating disk,I don`t see solution
And formating w ill erase all data on the disk,isn`t it?! (if i have it,of course).
again nothing
Thanks in advance !!!!!!
235.
pawan
Posted Decem ber 1, 2009 at 9:44 pm | Perm alink
great w ork .
thanks a lot
236.
pawan
Posted Decem ber 1, 2009 at 9:46 pm | Perm alink
great job .
thanx a lot.
237.
carl
Posted Decem ber 1, 2009 at 10:00 pm | Perm alink
have tried your process a few times w ith vista and 7 and w orks great but w hilst
installing w indow s i get an error code 080070241? any ideas w hy i get this code. pls
help
238.
Aaron
Posted Decem ber 2, 2009 at 12:43 am | Perm alink
Finally found a method that w orks. This actually w orks!!!!!!!!!!!!!!!! Thank you,
aw esome.
239.
Throwlands
Posted Decem ber 2, 2009 at 5:00 am | Perm alink
I just finished assembling a new computer that only has SATA connections and all I have
are PATA CDROM drives. Your guide saved me from spending money on a drive Id only
need once.
Many thanks.
240.
Blake
Posted Decem ber 3, 2009 at 11:12 am | Perm alink
I did every step right and got the right results. Even the Bootsect.exe part. it told me it
successfully created it. i w ent to boot desktop from USB and STILL got the BOOTMGR is
missing. Now i did it w ith vista from XP and it w orked great. i had the vista install cd. now
from vista to 7 its different. its an .iso file. is that w hy i cant make it w ork?
241.
Kevin
Posted Decem ber 3, 2009 at 12:36 pm | Perm alink
Todd
Posted Decem ber 4, 2009 at 1:35 am | Perm alink
I cant thank you enough.. my dvd-rom has been dow n, tryed fixing w ith the filter delete
but computer still doesnt recognize it, but it spins up at start up, I can put dvd in and it
acts like it w ants to but nothin..(yes all the bios stuff been checke, enabled and so on)
so needless to say this little fix has been a God sent.. Works like a champ.. the only
think that didnt w ork w as
Format fs=ntfs I formated it the old fashed w ay..
and in step 6. D:CD Boot I had to do CD/Boot amazing how that little / makes all the
difference
I w as a computer w ith xp and a good dvd drive to set up a third drive to boot from and
re-install vista on my laptop..
Thx again..
243.
Chris
Posted Decem ber 4, 2009 at 2:49 am | Perm alink
This is an excellent guide for anyone and I am very greatful you took the time to do this.
Quick note that may confuse people, in step 6 w here it states D:CD BOOT should be
D: CD BOOT as show n in the screen shot.
Thank you for the brilliant guide!!!
244.
vaitheeswaran
Posted Decem ber 4, 2009 at 4:33 pm | Perm alink
converted by Web2PDFConvert.com
vaitheeswaran
Posted Decem ber 4, 2009 at 4:56 pm | Perm alink
Gabe
Posted Decem ber 7, 2009 at 4:39 am | Perm alink
Johnathan M Camien
Posted Decem ber 8, 2009 at 7:29 am | Perm alink
I am not sure if this is posted but for everyone that has the CD as an ISO file you can
use MagicISO to mount the ISO file to a virtual drive so that the system sees it as a
CD/DVD. then just use that drive letter in place of the CD/DVD drive letter in the guide.
Worked like a charm for me.
248.
Saleem
Posted Decem ber 8, 2009 at 8:49 pm | Perm alink
everything w ent fine. booted on the flash drive, but cant partition using w in 7.
installation stopped there. w hat to do? tried it on asus Eee mini.
249.
Pown
Posted Decem ber 9, 2009 at 11:50 pm | Perm alink
i get a disk read error occurred w hen i try to boot from the usb i follow ed the guid and it
should w ork, w hats w rong?
250.
matthew
Posted Decem ber 10, 2009 at 8:22 am | Perm alink
waseem
Posted Decem ber 10, 2009 at 4:13 pm | Perm alink
killak
Posted Decem ber 10, 2009 at 7:32 pm | Perm alink
RS232
Posted Decem ber 11, 2009 at 8:44 am | Perm alink
PARAS
Posted Decem ber 13, 2009 at 7:16 am | Perm alink
INSTEAD OF GOING THROUGH ALL THIS PROCESS W E CAN JUST USE W IN2FLASH
APPLICATION FROM W IN2FLASH.COM OR JUST CAN GOOGLE W IN2FLASH AND EASILY GET
IT.
I AM USING W IN2FLASH FOR SOME TIME AND BEST PART IT CAN INSTALL W INDOW S XP AS
W ELL AS W IN 7 BOTH FROM USB PEN DRIVE.
TESTED BY ME ON ACER LAPTOP(7), HCL LEAPTOP(2), AROUND 19 DESKTOPS
255.
Gregory
Posted Decem ber 13, 2009 at 8:48 pm | Perm alink
Thank you very much!!! It took a lot of configuring and restarts but I finally managed to
recover my OS w ith zero data loss. After I back up my stuff, Ill be installing W in7 using
microsofts boot tool.
256.
RPJ
Posted Decem ber 16, 2009 at 11:30 pm | Perm alink
Worked perfectly. Used it on a 4Gb SD card w ith a USB SD reader to install W in7 64-bit
on an Acer laptop. Many thanks.
257.
CrabQuiche
converted by Web2PDFConvert.com
If you are doing this guide from XP, use the HP USB Flash Disk Format tool instead of
steps 3 and 4. This is because XPs DiskPart Tool does not support The NTFS Formatting
for USB flash disks. Thank you for a great guide. I am w orking on a tool w hich does it all
for you, called 7toUSB.
258.
Piyush
Posted Decem ber 17, 2009 at 10:57 am | Perm alink
If u get this message Could not map drive partition to the associated volume device
objects:
Access is denied.
goto C:/W indow s/System32/ (before doing anything (or before running DISKPART)
right click on cmd.exe
Run as administrator (just second option)
and repeat w hatevr is given in this w ebsite..DONE
259.
teejay
Posted Decem ber 17, 2009 at 8:13 pm | Perm alink
A disc read errorplz help me.i changed the BIOS priority to USB HDD.there w ere other
options USB FDD,USB CDROM,USB ZIP.
260.
Jake
Posted Decem ber 18, 2009 at 12:53 am | Perm alink
kamlesh
Posted Decem ber 18, 2009 at 2:31 pm | Perm alink
david dizzle
Posted Decem ber 19, 2009 at 8:16 am | Perm alink
admin
Posted Decem ber 19, 2009 at 11:09 am | Perm alink
@ David Dizzle
It seems your PC doesnt support USB booting, or your W indow s 7 ISO is not bootable.
264.
david dizzle
Posted Decem ber 20, 2009 at 6:56 am | Perm alink
andrew panda
Posted Decem ber 20, 2009 at 8:47 am | Perm alink
this w orks like a charm, did a vista install from usb. thanks!!!
266.
chacha
Posted Decem ber 20, 2009 at 11:23 pm | Perm alink
Could not map drive partitions to the associate volume device object: Access is denied.
This happened right after bootsect.exe/nt60 E:
(The usb key is considered by the comp as drive E)
I tried the so-called easier guide link, it couldnt even find an iso file in the w indow s 7
files. (Its on a cd)
And i know there is nothing w rong w ith the w indow s 7 cd, i just used it last night to
install it on my uncles comp, w hich is w here ive been trying to go through this guide)
I need it on a usb key so i can install it on MY notebook. Help anyone?
267.
chacha
Posted Decem ber 20, 2009 at 11:30 pm | Perm alink
Okay so, access isnt denied anymore. but it still says the same thing besides that
268.
Senior47
Posted Decem ber 21, 2009 at 2:19 am | Perm alink
On my USB-pen drive there is space enough for both the 32 and 64 bits version of
w indow s 7. Would it be possible to have a menu from w hich one could choose w hich OS
to install?
A new easy tutorial maybe!-)
269.
JaFar
Posted Decem ber 22, 2009 at 9:22 am | Perm alink
Thanks Chase (post 226) finally found that out and w as going to post w ith solution but
seen yours. Took me 20 minutes to realize that you have to right click and run as admin
in Vista and 7
270.
hnnn
Posted Decem ber 22, 2009 at 4:45 pm | Perm alink
rik
Posted Decem ber 22, 2009 at 7:23 pm | Perm alink
toderu
Posted Decem ber 24, 2009 at 5:51 am | Perm alink
Hello,
great w ork,
for saving time you can use format fs=ntfs quick
that can save some time if you have a big usb stick.
273.
CroatianBoy
Posted Decem ber 31, 2009 at 4:09 am | Perm alink
Z1pp3r
Posted Decem ber 31, 2009 at 3:26 pm | Perm alink
Sam
Posted January 1, 2010 at 2:15 am | Perm alink
Just thought others should know , command in step 7 must have a space after EXE
As published BOOTSECT.EXE/NT60 H:
This w orks BOOTSECT.EXE /NT60 H:
(show n in the screen cap correctly)
Sam
276.
triple six
Posted January 4, 2010 at 10:00 pm | Perm alink
Brody
Posted January 5, 2010 at 12:02 am | Perm alink
Well, accidentally formatted my external HDD w ith my movie library, .ISO library, and all of
my pictures on it, but, my fault.
278.
KIRITH SIVA
Posted January 5, 2010 at 4:46 pm | Perm alink
HEY,
MUCH APPRECIATED! GREAT TUTORIAL! AND IT W ORKS!! YOU SAVED ME SOME DOLLARS.
THANKS VERY MUCH!
KIRITH SIVA.
279.
Paul
Posted January 7, 2010 at 4:11 am | Perm alink
Man After days of searching and trial and error, FINALLY this is a guide that W ORKS!
converted by Web2PDFConvert.com
Nathan
Posted January 7, 2010 at 6:21 am | Perm alink
Great guide, but MS has now made it much easier for us:
http://store.microsoft.com/Help/ISO-Tool
281.
Vaidy Mohan
Posted January 9, 2010 at 2:00 am | Perm alink
Aw esome. I could restore my system from w hat you could call as disaster.
Thanks so much.
Vaidy
282.
Ahir @nurag
Posted January 9, 2010 at 3:07 pm | Perm alink
Brandon
Posted January 10, 2010 at 6:04 am | Perm alink
This w orked flaw lessly for upgrading my w ifes PC. She had a DVD ROM drive that
refused to be recognized and this w as an aw esome w ork-around and super fast.
Thanks!
284.
somebody
Posted January 10, 2010 at 10:55 am | Perm alink
lucy
Posted January 10, 2010 at 11:20 am | Perm alink
you cant copyright anything in the command prompt screenshots that you did using MSFT
instructions for this process.
dolt.
286.
Michiel
Posted January 11, 2010 at 4:48 pm | Perm alink
About step 6:
D: CD BOOT
The CD BOOT is not doing anything. Just D: is enough, anything after that is ignored.
For the rest: thanks for the guide, its really helpful for a lot of people I think.
287.
renren
Posted January 13, 2010 at 3:36 pm | Perm alink
XAce
Posted January 17, 2010 at 6:03 am | Perm alink
Robbie
Posted January 19, 2010 at 11:45 pm | Perm alink
hey it w ont let me do the last command, BOOTSECT.EXE /NT60 F: , my flash drive is f and
it says could not map drive partitions to the associated volume device objects: access is
denied???????.. w hat do i need to do
290.
slownie
Posted January 20, 2010 at 12:59 am | Perm alink
Excellent w ork, thank you. This is good help the beginner users.
Many thanks
bye slow nie
291.
zdarova
Posted January 20, 2010 at 3:22 am | Perm alink
i had some problems at the begining, as i have raid 0 w ith amd southbridge.
converted by Web2PDFConvert.com
so guys, for W indow s 7 x64 you need the folder /boot from a 32 bit dvd instalation if you
w ant to prepare the usb drive on a 32bit PC (i used from the DVD of RC w in 7 a had from
may 2009)
it w orked fine, i tried first w ith an Ultimate version x64
now i w ant to install the Profession W in 7, because i have the license from the university
for it
thanks!
292.
kk kangan
Posted January 20, 2010 at 2:50 pm | Perm alink
khang
Posted January 22, 2010 at 2:09 am | Perm alink
you should clarify step 5 for those w ho dont have the w indow s dvd. Mounting an image
isnt something everyone know s about. Like myself, I am assuming most people w ho are
gonna use this guide only have the .iso file and not the dvd.
294.
Patryk
Posted January 22, 2010 at 8:42 am | Perm alink
;( w ell, mine w ent bad, really bad, my disk 1 w as my second hdd (i realized that after) u
should add how to discover w hat disk is the usb, ive deleted all my most important
files;( i reached active, i didnt made format, is there a w ay to take back my stuff?
295.
John
Posted January 23, 2010 at 2:58 am | Perm alink
Worked Perfectly. I can now have the great W 7 on my laptop w ith a burned up DVD
drive, lol
296.
Paul Smith
Posted January 26, 2010 at 6:49 pm | Perm alink
Sinner
Posted January 27, 2010 at 7:36 pm | Perm alink
This is stupid, I didnt have to do all this crap, all I did w as format my 4GB flash drive in
fat 32 format, copy the contents if the W indow s 7 DVD contents to the USB flash drive.
And then set the bios to boot from flash. all done w ith my mouse, no diskpart or cmd
prompt.
298.
maseo
Posted January 29, 2010 at 11:00 am | Perm alink
@khang, if you only have the .iso file of w indow s 7 and not the dvd, (install pow er iso
trial-free online), nxt double click .iso image and it appears in pow er iso, in toolbar of
pow er iso click on mount select 1 drive(in drop out menu) follow a couple of prompts
and its mounted.nxtgo to my computer and you w ill see a virtual drive(DVD Drive)
their w ith the w indow s 7 in it, right click on it and explore(or open in new w indow ) all the
files are their and you can now copy them to your pen drive.
a much easier and quicker w ay is (assuming you have pow er iso installed) is simply right
click on .iso image and mount from their, my computer, explore or opencopy files//simple
really,
299.
maseo
Posted January 29, 2010 at 11:10 am | Perm alink
@ patryk
if you didnt get as far as format then you should be able to recover files, im assuming
your disc drive has dissapeared from my computer?? if so, go to start menu>>type
partition in search bar (dont hit enter) clcik on the create and format partitions file>>a
box w ill appear and take a minute or 2 to load in all your partitions..once loaded you
should see your missing partition/driveif so right click on it..select change drive letter
and paths,>>select add from the nxt pop up box>>type a letter in, make sure the letter
is not assigned to any other resources (egzampletype letter R ) once you put the letter
in, just click ok, your partition should be back as normal now in my computer.
300.
steve
Posted January 30, 2010 at 12:21 pm | Perm alink
This w orks like a charm. If your having problems try the other easy installation that he
has posted on the link at the top of the page. That one has only 4 steps that u follow . In
any case both of these installation guides have my 5 star rating*****
301.
SANRocks
Posted January 31, 2010 at 4:03 pm | Perm alink
lenny
Posted January 31, 2010 at 10:26 pm | Perm alink
it w orked you are a star i bought my note book for 50 coz it w ouldnt load up,, best 50
ive spent in a long time thanks to your help,,, cheers
converted by Web2PDFConvert.com
303.
Omega
Posted February 3, 2010 at 4:47 am | Perm alink
1st off, nice tutorial! I used my iPod touch as a flash disk, and used ultraiso to make the
image<so far so good, everything loads but I get a message stating that 'device
drivers are missing' [paraphrased] I read around and it looks like it may be cd/DVD not
being supported, but I'm installing from USB, no need for DVD drive help pleez
304.
le
Posted February 5, 2010 at 2:17 am | Perm alink
that sir,
simply put, is the bollox,
TUVM
305.
antonio
Posted February 6, 2010 at 8:50 am | Perm alink
admin
Posted February 6, 2010 at 4:48 pm | Perm alink
@Antonio
Yes, it w ill format your drive.
307.
Geoff
Posted February 10, 2010 at 9:01 am | Perm alink
Worked perfectly!!!
The funny thing w as my W indow s 7 Ultimate DVD w as scratched, so I tried to use my
W indow s 7 Home and that didnt fit on my 4gig USB stick.
Than I tried an 8 Gig microSD card and that did fitand booted perfectly on my Asus
R1600.
Thanks for really w ell w ritten and detailed instructions.
308.
Victor Aroma
Posted February 11, 2010 at 7:27 am | Perm alink
Rohit
Posted February 12, 2010 at 7:09 am | Perm alink
Perfect .. 10/10 !
Thanks for sharing this valuable info ..
310.
duncan
Posted February 12, 2010 at 12:14 pm | Perm alink
xkovi
Posted February 12, 2010 at 2:10 pm | Perm alink
The easiest w ay how to install W in7/Vista from usb is just to format your USB stick (from
w indow s, no cmd line needed!) and extract files from *.iso into root of your USB
stick.nothing elsetested million times
312.
zorzer
Posted February 16, 2010 at 2:02 am | Perm alink
SG
Posted February 16, 2010 at 2:03 am | Perm alink
Thanks a lot! The MS tool kept erroring out w hen trying to create a bottable USB installer
from the DVD. How ever your instructions w orked like a charmThanks!
314.
aj
Posted February 16, 2010 at 7:10 am | Perm alink
Although there are a couple of tools out there to help simplify this process, I just ran
across a new one that w orks under XP as w ell. Bootsage is another nice utility to add to
your toolbelt. http://firesage.com/bootsage
315.
The-Stoic
Posted February 22, 2010 at 5:44 pm | Perm alink
You are a legend. Got a SFF here and no DVD or CD-Dom. Used your instructions to get
W indow s Home server up and running. Thanks for the info.
316.
noneya bizness
converted by Web2PDFConvert.com
Harry
Posted February 24, 2010 at 2:51 am | Perm alink
Thx dude !
318.
Moosewad
Posted February 24, 2010 at 11:23 am | Perm alink
once i hit format fs=ntfs it just says 0 percent and stays there.
Help!!
319.
lakshay
Posted February 25, 2010 at 7:10 pm | Perm alink
Vicky
Posted February 27, 2010 at 3:47 am | Perm alink
Excellent guide.
I need to save this site on my pc.
Extremely useful and helpful
Thanxs.
321.
DG3
Posted March 6, 2010 at 12:19 am | Perm alink
Thanks for the guide ^^ verry usefull! You saved me from CD/DVDs w ith w indow s and
others!
322.
khizer
Posted March 6, 2010 at 11:00 pm | Perm alink
nice w ork!!!
can anyone tell me how to put xp in the usb and make it bootable..please
thanks
323.
deo
Posted March 11, 2010 at 2:05 am | Perm alink
In case you get error message Access Denied in the last step you may need to start
Virtual Disk service from Start->Run->services.msc
324.
Richard Borg
Posted March 11, 2010 at 2:31 am | Perm alink
ralph
Posted March 12, 2010 at 10:40 pm | Perm alink
Really helpful.
thnx
326.
padam
Posted March 13, 2010 at 10:01 pm | Perm alink
You should really give the _original author_ credit, instead of pretending like you w rote
this guide yourself.
Just a couple of w eeks after its posted here:
link removed
You turn around and post it here.
You can try to deny it, but its the _exact_ same steps in the _exact_ same order, on top
of using the _exact_ same commands, again, in the _exact_ same order.
Plagiarism is baaaaaad.
327.
admin
Posted March 13, 2010 at 10:43 pm | Perm alink
@Padam
How can you say that just because order of commands are same? You know , one cant
create a bootable disk by entering those commands in random order. So steps w ill be
same if you refer other sites too. I cant blame other sites for that right? You need to
execute the step 1 first and then 2.. You cant reverse it!
328.
Kevin Woley
converted by Web2PDFConvert.com
Looks like you guys did a great job copying the instructions from here:
link removed
Way to pass it off as your ow n.
Kevin
329.
padam
Posted March 14, 2010 at 5:19 am | Perm alink
just because [...]? Its kinda cute how you ignored the other points. The order of the
commands is important, but they do _not_ have to be executed in that exact order.
Furthermore, Im even more convinced you have no idea w hat any of the commands
posted do as youre misleading users into thinking that bootsect doesnt w ork on XP
installs or vista installs w ith XP as the target. Its a matter of changing the /n60
argument to /nt52 for it to use the master boot code thats compatible w ith NTLDR
(rather than BOOTMGR, w hich is w hat Vista/7 uses).
To quote you in case you decide to go deleting it:
This guide doesnt w ork for XP..Only for Vista and W indow s 7.. [snip]
330.
admin
Posted March 14, 2010 at 8:45 am | Perm alink
@Kevin
I dont know w hat to say! For your kind information, Microsoft has given the how to
make bootable usb in its W inPE help guide. Do dow nload and read it before making such
comments.
331.
AbhishekDatta
Posted March 14, 2010 at 8:25 pm | Perm alink
padam
Posted March 14, 2010 at 9:13 pm | Perm alink
The fact that you removed the link to his blog from both of our posts speaks volumes in
itself. There are other links all throughout the comments on this page, _none_ of w hich
have been removed.
kmw oley.com/blog/?p=345
Leave it up this time, let the users make their ow n decision as w ho stole it from w ho.
333.
admin
Posted March 14, 2010 at 9:48 pm | Perm alink
@Padam
I have deleted the links just because I dont allow readers to post links in comments. You
might get tw o or three links in the w hole comment section (in this post). And mind that I
could have deleted your comments if i had done so. Hope you got it. Also note that I w ill
be deleting your future comments as I dont like to argue on a useless topic.
334.
Andy
Posted March 15, 2010 at 12:15 am | Perm alink
@admin
y w asting time on useless things/people..
plzz help me out through the problem soon..
335.
Rob
Posted March 15, 2010 at 4:02 am | Perm alink
Works perfect.
Thank you very much for youre efforts!
336.
Andrew
Posted March 15, 2010 at 7:17 am | Perm alink
Peje
Posted March 16, 2010 at 6:25 pm | Perm alink
Sanjay
Posted March 17, 2010 at 6:09 pm | Perm alink
converted by Web2PDFConvert.com
339.
mwawe
Posted March 17, 2010 at 8:56 pm | Perm alink
im trying to make a usb w ith W in7 64bit my OS is W in7 32bit and i have problem in step
7.
system sayid:
version of F:\boot\bootsect.exe is proper w ith version running on this PC.
anyone know w hat to do ??
340.
mwawe
Posted March 17, 2010 at 8:58 pm | Perm alink
correct:!!!!!
version F:\boot\bootsect.exe is NOT proper w ith.
341.
MTL
Posted March 18, 2010 at 7:37 pm | Perm alink
Great guide. For those of us w ho are not builders or very familiar w ith computers,
including a detailed step on how to change the boot priority in BIOS from HDD or CD to
USB w ould make this guide complete
Thanks for your time and effort on w hat is here though Much appreciated!
342.
Diego Freniche
Posted March 19, 2010 at 3:10 pm | Perm alink
Thanks! After trying a lot of tutorials, this one W ORKED. Ive finished installing my Asus
904 HD
Thanks again!
343.
Sathya
Posted March 20, 2010 at 12:30 am | Perm alink
Thanks a lot!!!!
It w orked good for me Only thing you could further mention is that diskpart doesnot
recogonise removable storsge in xp it w orks only in vista (or) w in 7.
344.
visions
Posted March 20, 2010 at 1:41 am | Perm alink
CD BOOT Problems you need to *press ctrl c then type the commands below 100%
w orking for me now
D: CD BOOT and hit enter.W here D is your DVD drive letter.
CD BOOT and hit enter to see the below message.
345.
shakir
Posted March 24, 2010 at 1:37 am | Perm alink
Huy Nguyen
Posted March 24, 2010 at 8:51 am | Perm alink
Excellent
Works great for me
Thanks
347.
underworld666
Posted March 25, 2010 at 6:07 pm | Perm alink
Really great!!!
This tips w orks fine for me.
Thanks!
348.
david
Posted March 28, 2010 at 3:51 am | Perm alink
i cannot burn cds or photos onto a disc w hen i try it says put disc into cd drive d .Thanks
if you can help me
349.
Oleg
Posted April 1, 2010 at 7:55 pm | Perm alink
Hi
Thanks a lot for info.
Can I have both, vista and w in7 on usb stick at the same time? Just out of interest.
Thanks
350.
RM
Posted April 2, 2010 at 7:05 am | Perm alink
converted by Web2PDFConvert.com
I did this from a W indow s 7 computer and w as able to install W indow s 7 from USB w ith
no issues at all.
Well done!
351.
Patatattat
Posted April 2, 2010 at 8:55 am | Perm alink
I did this process on a SATA SSD 16gb harddrive I had, and it w orked!
352.
Beautiful.
Rishad
Posted April 6, 2010 at 5:28 pm | Perm alink
Rajesh
Posted April 6, 2010 at 5:29 pm | Perm alink
Man, just w orked like a charm in the second try. First try I had error COULD NOT FIND
MAP DRIVE PARTITION TO THE ASSOCIATED VOLUME DEVICE OBJECT:
ACCESS IS DENIED
Solution:
C:\W indow s\System32\cmd.exe
On the pop-up right click context menu, select
Run as Administrator
Repeated all the steps once again.. and Voila
thanks a lot my Friend..
354.
Tim
Posted April 12, 2010 at 4:42 pm | Perm alink
Skyler
Posted April 13, 2010 at 9:41 am | Perm alink
I did all the steps up until 5 now I w as w ondering I dont have W in 7 on a disk just on
my hardrive can I just copy over to my USB at this point? and w ould I still have to change
the Bios settings?
356.
Amos
Posted April 13, 2010 at 9:03 pm | Perm alink
Hi, excellent instructionsIm almost there but w hen i run format fs=ntfs I get the
follow ing error message right at the end of the format..
100 percent completed
diskpart has encountered an error the parameter is incorrect
have you seen this before and if so any suggestions?
im on Vista
357.
Amos
Posted April 13, 2010 at 9:08 pm | Perm alink
actually you cant continue w ith the instructions, if you try assign you get There is no
volume specified. Please select a volume and try again
358.
Krim
Posted April 15, 2010 at 2:46 am | Perm alink
W hen I put the usb in, it gets to the boot screen and says BOOTMGR IS MISSING and
Ive repeated the BOOTSECT steps already.
359.
Hannibal
Posted April 16, 2010 at 2:46 pm | Perm alink
Hannibal
Posted April 16, 2010 at 2:51 pm | Perm alink
TO AMOS
make sure you fill all details in CAPITAL LETTERS and just take your time to go through it
again.
361.
Zaid rohid
converted by Web2PDFConvert.com
VolN
Posted April 18, 2010 at 10:55 pm | Perm alink
To Zaid
try to run cmd.exe as administrator and it w ill be fixed
363.
Harjinder Singh
Posted April 25, 2010 at 4:30 pm | Perm alink
u r the best men i think bcz u simply tell us the setp for install w indow frm usb.anybody
easily do it. thanx for ue help.
364.
miro
Posted April 26, 2010 at 5:51 am | Perm alink
You need to add > Type EXIT < To exit the diskpart after formatting. Like this:
5. Type EXIT to exit DISKPART
6. Maximize the minimized Command Prompt in the 4th step.Type the follow ing command
now :
D: CD BOOT and hit enter.W here D is your DVD drive letter.
Otherw ise very helpful indeed
Thanks
365.
izdelava spletnih st
Posted April 27, 2010 at 10:57 am | Perm alink
Great article!
Helped my friends laptop
366.
leahcim
Posted April 28, 2010 at 9:14 am | Perm alink
Zaid rohid
Posted April 29, 2010 at 1:44 am | Perm alink
hamedshaik
Posted April 29, 2010 at 10:23 pm | Perm alink
Derick
Posted May 2, 2010 at 6:52 am | Perm alink
insert the usb flash drive hit any key depending your pc you have to go to the system
bios
370.
Omni
Posted May 2, 2010 at 7:00 am | Perm alink
Works w ith doing a quick format asw ell, as it takes long time to do a regular.
Super guide!
371.
Mohamed
Posted May 4, 2010 at 6:33 pm | Perm alink
ferpuj
Posted May 6, 2010 at 9:52 pm | Perm alink
Try w intoflash and forget all your usb problem, all you need installation cd w in7/vista/xp
w intoflah and usb stick 4gb for 7/vista 2gb for xp drivers and stripcan do it later.
373.
mani
Posted May 12, 2010 at 2:39 pm | Perm alink
now microsoft provide their ow n tool to create a bootable usb drive to install w indow s
vista/7/2008/2008-R2
converted by Web2PDFConvert.com
374.
32 bit and 64 bit. This method w orks on both vista and w in7. either 32 bit or 64 bit.
now because 64 bit capacity is more than 32 installation CD or DVD.
I have 16 GB card. On this card i have
w in 98
w in me
w in professional 2000
w in server 2003
w in NT netw orks
w in xp ( all in 1 ) home, professional, media center edit
w in vista (all in 1)
w in 7 ( all in 1 ) 32 bit and 64 bit is only w in 7. above rest os are only 32 bit
I have installed too many times on different system different os w hat customer ask for it.
via using this memory card..
simply booting and them select from the list w hat i need to install then after that setup
for that w indow s w ill run up..and so go on.
w aqas _ akash AT yahoo DOT com if some one need please send me personal email.
375.
litesh
Posted May 13, 2010 at 10:22 pm | Perm alink
tnx i like it
376.
litesh
Posted May 13, 2010 at 11:10 pm | Perm alink
sir after installing w indow s i got error on pendrive that w indow w as unable to format nw
ho to format it into fat again.
377.
Madhur Makwana
Posted May 19, 2010 at 10:01 am | Perm alink
Bill Gates
Posted May 21, 2010 at 5:50 am | Perm alink
setu
Posted May 24, 2010 at 3:12 pm | Perm alink
May be I am in biggest trouble of my life w ith computer, I w as follow ing your steps
w ithout know ing that my main backup data hdd (500gb) w as attached and I follow all
the steps till the formatting .w here I realized I have formatted the w rong one..and if I
dont get my data back I w ill be at zero.al my w ork and everything w as in it n I dont
have a dvd back up as w ell..i know its stupid fuced up situation any help w ill be life
saver.please pls..get me out of this..
380.
admin
Posted May 24, 2010 at 6:36 pm | Perm alink
@Setu
You can try EASEUS Data Recovery W izard free edition to get back your data. I hope you
w ill get back your data.
381.
anon
Posted May 28, 2010 at 1:41 pm | Perm alink
After copying is complete, delete the file ei.cfg to make all W indow s varients available.
382.
oxygen
Posted May 28, 2010 at 8:20 pm | Perm alink
Matt
Posted May 29, 2010 at 5:51 am | Perm alink
OMG, this w orks so w ell, thanks, i have tried so many other guides and they did w ork.
THANKS
384.
Benjamin
Posted June 1, 2010 at 7:44 am | Perm alink
To anyone else still having the error in DiskPart, you MUST right click the CMD shortcut
w ithin your Accessories folder and select RUN AS ADMINISTRATOR.
Otherw ise, permission denied errors.
385.
Suneev
Posted June 1, 2010 at 11:35 am | Perm alink
I put forw ard my w arm thanks for the help this post provided me.
This process is w orking fine w ith w indow s 7
Thanks Again
Suneev
suneev.lpu@gmail.com
converted by Web2PDFConvert.com
386.
Michael
Posted June 1, 2010 at 1:27 pm | Perm alink
Ive used this guide before w ith success, but its not w orking this time. Every time I type
in cd boot, I get an error message stating The system cannot find the path specified.
Ive already tried tw o computers and I get the same message. I also tried replicating the
exact steps I did the first time by using a virtual drive, but that isnt w orking either.
W hats w rong?
387.
azhk
Posted June 6, 2010 at 10:53 pm | Perm alink
Robin
Posted June 7, 2010 at 10:43 pm | Perm alink
After step 7 it show s an error stating Could not map drive partitions to the associated
volume device objects: Access is denied
Any idea how to solve this problem?
389.
Peter
Posted June 8, 2010 at 12:16 am | Perm alink
Dennis
Posted June 8, 2010 at 2:25 am | Perm alink
somu
Posted June 8, 2010 at 4:05 pm | Perm alink
In the step 5 you had mentioned insert your W indow s7/Vista DVD into the optical drive
but w hat if i dont have optical drive, i am unable to go further this step.
392.
Thankful29l
Posted June 10, 2010 at 10:50 pm | Perm alink
ander
Posted June 16, 2010 at 7:23 am | Perm alink
Taleeno
Posted June 16, 2010 at 5:34 pm | Perm alink
I did this the first time and it w orked fine- But i copied the w rong version of W in7 w hich
had expired. Do i need to run command prompt again for the new er version or can i just
copy the files over from the new DVD and go straight aw ay?
396.
mezvix
Posted June 20, 2010 at 9:07 pm | Perm alink
for w indow s xp users format usb w ith petousb tool you can get by googling around and
runbootsect as instructed , other w ise boodsectis also available standalone on many
w ebsites to make usbs bootable .it even supports making xp bootable usb
397.
SATADRU
Posted June 21, 2010 at 11:12 am | Perm alink
HEY GUYS JUST MOUNT THE W IN 7 ISO FILE IN DEMONS TOOL IN XP AND INSTALL IT TO
converted by Web2PDFConvert.com
joseph
Posted June 24, 2010 at 3:30 am | Perm alink
Santhosh
Posted June 24, 2010 at 10:20 pm | Perm alink
Ahmad Bukhori
Posted June 25, 2010 at 10:52 am | Perm alink
Brad
Posted June 26, 2010 at 9:21 am | Perm alink
Just aw esome. Very nicely done, easy to understand and exactly w hat I w as after.
402.
Raeef
Posted June 26, 2010 at 12:52 pm | Perm alink
Harsha Madushan
Posted June 26, 2010 at 3:10 pm | Perm alink
Anurag
Posted June 26, 2010 at 7:06 pm | Perm alink
Victor Fernandes
Posted June 28, 2010 at 10:49 am | Perm alink
Sir,
At present I am using W indow s XP w hich I w ould like to replace by W indow s 7. Please
help me to install W indow s 7 on my computer.
Thanking you.
406.
raksmey
Posted June 28, 2010 at 3:07 pm | Perm alink
thank you post is very useful for me. but does it w ork?
407.
Hudson
Posted June 29, 2010 at 6:52 pm | Perm alink
Im currently at the copying files to USB end stage. But for anyone w ho reads dow n here,
make sure to check that youve selected the right disk in stage 4, one w ay to do this is
by typing DETAIL DISK and hitting enter after the SELECT DISK 1 line, brings up a load of
details and a volume list at the bottom, w ith name, size etc, mine w as Disk 4.
(Using a different guide I manage to format my D:, good thing Ive got a server backup.
DONT MAKE MY MISTAKE)
408.
Venthan
Posted June 29, 2010 at 10:24 pm | Perm alink
Hey,
Thanks a lot, this helped me to resolve my issue after a 5 days struggle
409.
nex
Posted July 1, 2010 at 2:28 pm | Perm alink
hi,anyone can help in bios settings,how it is done to select pendrive ..i cannot do it
although i have new m/b and all above trick ..but i cant detect my bootable drivemay i
lack this ideahelp me out ..thanks
410.
solem
Posted July 2, 2010 at 2:48 am | Perm alink
I w as a bit sceptical about this actually w orking. It just seemed too good to be true, this
being W indow s and all. But it actually w orks.
Like mentioned earlier its not possible to run bootsect from 32-bit w indow s on a 64-bit
version.
Also, I had to run cmd as admin or else bootsect w ould complain about something I cant
remember atm.
411.
real1tyFTW
Posted July 4, 2010 at 2:21 pm | Perm alink
converted by Web2PDFConvert.com
OMG THANX !!!!!!!!! I HAD A MAJOR FKING ISSUE, ! AND BY JUST SAYING the first 2
commands the SETUP started and i w as good to go
THX
ALLLLLOOOOOOOOOOOOOOOOOOOOT
412.
solarni sistemi
Posted July 5, 2010 at 7:19 am | Perm alink
i found this article helpful because recently i had problems w ith usb and booting. THANKS
413.
Jibba
Posted July 6, 2010 at 2:15 pm | Perm alink
Dont know w hy everyone post hard guides w ith cmd promt. There is a program directly
from Microsoft to do that same thing in 3 clicks. It also w orks on pirate/cracked copy of
w indow s 7 .
Dow nload and guide: http://store.microsoft.com/Help/ISO-Tool
414.
twe
Posted July 9, 2010 at 1:14 am | Perm alink
Thank you so much for this tutorial. It w as easy and helped things run much more
smoothly. W hat a relief!
415.
Jan
Posted July 10, 2010 at 12:15 pm | Perm alink
This guide didnt w ork for me. W hen I try to boot the USB drive it just says invalid
partition table and halts.
416.
Jan
Posted July 10, 2010 at 12:27 pm | Perm alink
I fixed it, it didnt have anything to do w ith this guide. If you get the error invalid
partition table try configuring your usb drive to load as hddd and not removable/fdd.
417.
Fane
Posted July 13, 2010 at 5:20 pm | Perm alink
Kumar
Posted July 16, 2010 at 1:06 pm | Perm alink
There is alw ays an easy w ay, dow nload the tool from w indow s w ebsite and vollla sit
back and relax it w ill do everything for you !!!
http://store.microsoft.com/Help/ISO-Tool
419.
Igre
Posted July 24, 2010 at 8:34 pm | Perm alink
LT
Posted July 25, 2010 at 4:00 am | Perm alink
I just had to tell you this w as so easy, even for a non-techie like me, and by far the
easiest setup instructions on the w eb. I am installng W in 7 on my (6-yr old) sons
netbook as w e speak 7 he is so impressed!
421.
bat787
Posted July 29, 2010 at 10:10 am | Perm alink
Johnny
Posted July 29, 2010 at 10:23 pm | Perm alink
To get this w orking in XP just use a W indow s 7 virtual machine. Virtual Box is easy
enough.
Its w orking for me.
PS. Not sure if it has been said, but not looking through all the comments lol
423.
Kamesh
Posted July 31, 2010 at 2:13 pm | Perm alink
I have a doubt in 5th step w hr u say to insert W in 7 DVDbut if my cd-rom is not w orking
how can i insert DVD in tht place..my rom is not even opening if i press the button..then
w hat should i do??
424.
Kayes
Posted July 31, 2010 at 5:32 pm | Perm alink
This is really cool man, buy 1 thing in the step 7 w hen i type BOOTSECT.EXE /NT60 H: it
w as not w orking but next time w hen i tried it w as w orking.
Any w ay thanks for the real tutorial. I hope i w ill see more useful tutorial soon.
converted by Web2PDFConvert.com
425.
Summitsingh Thakur
Posted July 31, 2010 at 9:27 pm | Perm alink
Thanks! 100% Working for me. Well, before I w as able to install Ubuntu only.
426.
Ghost
Posted August 4, 2010 at 10:54 am | Perm alink
ThanX allot to w hoever brain is behind all this. Works 110% clean & safe install. No
problems faced. Follow the steps as w ritten
427.
Cristian C.
Posted August 6, 2010 at 5:26 pm | Perm alink
Thank you!!!
Your tutorial is excelent!
Simple, safe and easy to follow .
Thank you, thank you!
428.
Adlantis
Posted August 7, 2010 at 5:45 pm | Perm alink
Maneksh.V.Thomas
Posted August 7, 2010 at 5:50 pm | Perm alink
SHAILENDRA
Posted August 8, 2010 at 5:20 pm | Perm alink
Michelle
Posted August 9, 2010 at 8:02 am | Perm alink
junex
Posted August 9, 2010 at 11:15 am | Perm alink
avaton
Posted August 10, 2010 at 12:37 am | Perm alink
excellent w ork m8
434.
Steve
Posted August 12, 2010 at 4:19 am | Perm alink
w hat a legend!! I w as completely lost and you have saved me w orked a treat.
Many thanks 435.
Mack
Posted August 12, 2010 at 8:43 am | Perm alink
Everything w orked fine dow n to copy the files from the DVD to the USB. I get a Cant
read from the source file or disk. bootsect.exe.mui
Any ideas are appreciated.
436.
adel
Posted August 13, 2010 at 12:38 am | Perm alink
AJ
Posted August 13, 2010 at 8:04 am | Perm alink
W hat a guide, 101% w orking. People still leaving comments every day after one year.
One of the best guides ever if you ask me! THANK YOU, you deserve it!
438.
Smithy
Posted August 13, 2010 at 2:42 pm | Perm alink
Jesus, how many times has the guy got to say it. ITS FOR W INDOW S VISTA AND 7 NOT
converted by Web2PDFConvert.com
XP . Bunch of retards!
439.
NLkiwi
Posted August 15, 2010 at 11:43 pm | Perm alink
Follow ed instructions and w orked great, no issues. Created a W in7x64 usb install from a
W in7x64 machine. Install w as for a HTPC w ith no optical drive.
440.
odotan
Posted August 16, 2010 at 11:52 am | Perm alink
Tammi
Posted August 17, 2010 at 2:21 am | Perm alink
I had an error, w hen I tried to format, that said Virtual Disk service error: the file system
is incompatible. I fixed it by using quick format instead. Use this command
format fs=NTFS quick
I hope this helps somebody. =)
442.
rakesh
Posted August 17, 2010 at 12:35 pm | Perm alink
by the w ay Im using MSI P55-GD65 motherboard and transcend 4GB USB drive.
is it my board or the usb drive.A Read Error
please help
443.
Rahul
Posted August 17, 2010 at 6:41 pm | Perm alink
This method w ill not w ork if you are running on W indow s Xp.The best alternative w ill be
to use either use either the microsoft method or try to use softw ares like W intoFlash to
automate it for you.
444.
Abdullah
Posted August 17, 2010 at 8:57 pm | Perm alink
This method w orked for me 100%, i am installing right now from a 8GB USB. Thanks a lot
!!!!!
445.
Corey j
Posted August 18, 2010 at 3:13 am | Perm alink
LAP87
Posted August 18, 2010 at 11:15 am | Perm alink
W indow s 7 USB/DVD Tool , takes your ISO and makes a bootable USB Drive or DVD.
Works under Xp/Vista.
http://store.microsoft.com/help/iso-tool
447.
Johnsin
Posted August 18, 2010 at 7:58 pm | Perm alink
Wow this w as so Educational I tried to do it w ith both x64 and x32 and there it w as on
my EHDD! Cool Guide! Thanks man
448.
Frankie
Posted August 19, 2010 at 4:10 am | Perm alink
W hen you said insert the W indow s Vista/W indow s 7 disk, did you mean insert a blank
disc or the disc that already has the softw are on it?(The $100 disc from store that comes
in the softw are box)
Thanks
449.
DRBDANISH
Posted August 19, 2010 at 5:17 am | Perm alink
admin
Posted August 19, 2010 at 9:20 am | Perm alink
Frankie, put the disc that has W indow s 7 on it. Good luck!
451.
Roxy
Posted August 19, 2010 at 12:48 pm | Perm alink
I follow ed this guide but w hen booting up i have an error message A disk read error
converted by Web2PDFConvert.com
Litlis
Posted August 19, 2010 at 2:07 pm | Perm alink
I do all the steps but on step 7 then i w rite bootsect.exe /nt60 he w rite this:
This version of G:\boot\bootsect.exe is not compatible w ith the version of W indo
w s youre running. Check your computers system information to see w hether you n
eed a x86 (32-bit) or x64 (64-bit) version of the program, and then contact the
softw are publisher.
then w hat should i do??
453.
good stuff
Posted August 19, 2010 at 4:55 pm | Perm alink
Valdez
Posted August 19, 2010 at 6:01 pm | Perm alink
admin
Posted August 19, 2010 at 7:47 pm | Perm alink
tavu
Posted August 20, 2010 at 12:26 am | Perm alink
I cant copy the autorun file from the W indow s DVD to the USB stick. It says I need to
provide an administrator to copy to that folder. Everything else is copied, just the
autorun has this problem. W hat can I do?
Thank You.
457.
puneet
Posted August 22, 2010 at 2:01 pm | Perm alink
Miss Pretty
Posted August 22, 2010 at 10:07 pm | Perm alink
I w ant to know the detail steps on how you can repair w indow operating system.
Thanks
459.
Miss Pretty
Posted August 22, 2010 at 10:09 pm | Perm alink
Also i w ant some things on Virtual LAN, the problems and prospects of it.
Thanks for your help.
460.
miss26
Posted August 23, 2010 at 3:35 pm | Perm alink
Uwais
Posted August 24, 2010 at 7:21 am | Perm alink
hi
i am using this method to install snow lepoard on a previously w indow s machine w ill it
w ork??
btw my snow lepoard image is on my comps HD so i cant complete step 5 onw ards??
w hat do i do??
also is there anyw ay of reversing this procedure after i haveinstalled the OS so i can use
the HD as a mass storage device after??
thanks
462.
john
Posted August 24, 2010 at 7:25 am | Perm alink
converted by Web2PDFConvert.com
hi am i able to use this method to install MAC OS snow lepoard. i have no disk just the
.DMG file so i cant complete step 5 onw ards. w ill it still w ork??
also am i able to reverse the effects on my external HD so i can use it as a mass storage
device after??
thanks
463.
admin
Posted August 24, 2010 at 8:48 am | Perm alink
@ John
Sorry, I have no idea about Mac OS.
464.
DANNY
Posted August 24, 2010 at 9:42 pm | Perm alink
Thanks man this is by far the best and accurate tutorial for making a w in7/vista bootable
usb
465.
DANNY
Posted August 24, 2010 at 9:47 pm | Perm alink
Dave D.
Posted August 25, 2010 at 7:23 am | Perm alink
Hey, I tried it and w orks perfectly, thanks a lotive tried other guides w ith no success
but your guide is fantastickeep up the good w orkthis w orld needs more helpful
people like you.
467.
RAZON
Posted August 25, 2010 at 12:38 pm | Perm alink
MANY MANY THINKS SIR BUT I HAVE A PROBLEM TO COPY SETUP.EXE FILE
W HY IT NOT COPY. PLEASE EXPLINE ME SIR
468.
Fi156
Posted August 25, 2010 at 3:21 pm | Perm alink
Nice How To, but the command: format fs=ntfs needs HOURS not minutes
469.
naveen kumar
Posted August 26, 2010 at 7:08 pm | Perm alink
Madhav
Posted August 27, 2010 at 1:01 pm | Perm alink
@Fi156 better use format fs=ntfs quick This w ill take you a few seconds. that command
w ithout quick w ill take long time because it performs a complete format. thanks
471.
KOUSHIK
Posted August 28, 2010 at 12:08 am | Perm alink
actually i have a another problem .i have a pen drive but its dont show its original
memory and it is not to be formatted .this pen drive is 8 gb but show ing 69mb.if you give
me a suggestion that how i am recover from this problem so iam glad ti you.
472.
Richard
Posted August 28, 2010 at 11:16 am | Perm alink
You rock man! Thanks for this guide. Ive spent tw o w hole days trying to repair my
corrupt W indow s 7 installation on my Netbook, w hich has been a challenge as it has no
optical drive, so having a bootable Flash Drive w as the perfect answ er. Thanks again!
A few tips to others:
- The format of the USB drive takes a w hile, just be patient (I used the full format, not
quick, just to be sure!)
- If youre getting an Access Denied error w hen trying to map partitions, its because you
didnt run the command prompt as Administrator. Right click on the Command Prompt
program as select Run as Administrator
- W hen setup has completed, dont forget to set your boot priority back to the Hard Drive
in the BIOS!
473.
Anku
Posted August 28, 2010 at 9:51 pm | Perm alink
Cheryl
Posted August 29, 2010 at 10:39 pm | Perm alink
I have done this w hat method of copying files from cd to usb is best, I Right clicked
copyed then right clicked and pasted. W hen I tried to boot up I got BOOTMGR.exe
missing and it w ouldnt boot up. Am I doing something w rong?
475.
Amp
Posted August 30, 2010 at 10:27 am | Perm alink
converted by Web2PDFConvert.com
476.
zero
Posted August 30, 2010 at 9:22 pm | Perm alink
ive already try your method, but i have a problem here w hich is, after my computer
restart to finish the installation, it came back for the begiining to format my computer and
not proceed for the completing installationhow to overcome this problem?please help
me
477.
Ed
Posted August 31, 2010 at 3:46 am | Perm alink
GEORGE
Posted August 31, 2010 at 6:01 am | Perm alink
zero
Posted August 31, 2010 at 6:50 am | Perm alink
ive already try your method, but i have a problem here w hich is, after my computer
restart to finish the installation, it came back for the begining to format my computer and
not proceed for the completing installationhow to overcome this problem?please help
me
480.
gaithat
Posted Septem ber 1, 2010 at 8:06 pm | Perm alink
It w as a perfect explanation.
Thanks for such a nice tutorial.
Only problem, I faced w ith BOOTSECT.EXE /NT60 H:command.
Once you invoke Command Prompt like run as Administrator there w as nothing like
W indow s Xp does not recognize removable drive under: LIST DISK segment.
Pl. keep it up.
481.
bulger
Posted Septem ber 2, 2010 at 6:12 pm | Perm alink
Does not w ork on my vista laptop.. tried several times now keep getting
BOOTSECT.EXE is not recognized as an internal or external command, operable
program or batch file, Thanks to the author as I have used this for W indow s 7
previously and it w orked fine but any help w ith vista install w ould be appreciated!
482.
I8bnsober
Posted Septem ber 4, 2010 at 2:35 am | Perm alink
Worked great for me except the clean command run as (admin) gives me an access
denied on v*sta and w *n7 but I skip this step and even use the same w indow to
perform the partitioning and the bootsect, w orked great on both.
Thanks.
483.
Karlo Antukin
Posted Septem ber 5, 2010 at 7:13 pm | Perm alink
for those w hos stuck at step 7 coz Could not map drive partitions to the associated
volume device objects:
Access is denied. run cmd as administrator that w ould do the trick
484.
bziz
Posted Septem ber 5, 2010 at 9:13 pm | Perm alink
converted by Web2PDFConvert.com
problem w ith could not map access denied but here is the solution:
you have to go into run and go into cmd. then you have to minimise it and on your
taskbar right-click the icon for cmd and also right-click on command prompt then click on
run as administrator
485.
Darky
Posted Septem ber 5, 2010 at 11:19 pm | Perm alink
HeyCan i install w indow s 7 w ith usb * i dont have dvd reader atm * if i dont have a
w indow s before it..Like my old w indow s crashed & now am w ithout w indow s at all & i
w anna install w indow s 7 & no dvd reader ,thx alot
486.
TechNazgul
Posted Septem ber 6, 2010 at 12:49 am | Perm alink
Just w anted to say thanks for posting this. Worked like a charm for me w ith W indow s 7
Ultimate x86 installing to an Acer Revo 1600 (w hich Im using to test out the new XBMC
beta release of Dharma).
487.
young money
Posted Septem ber 6, 2010 at 1:03 am | Perm alink
IceaTronic
Posted Septem ber 6, 2010 at 10:42 pm | Perm alink
Pro Tip:
W hen formatting the USB Stick, use the follow ing:
format fs=ntfs quick
Takes about 30 seconds to format the drive. Incredibly handy if your USB stick is 8GB+
like all of mine are. I dont w ant to w ait 20 minutes for it to format
489.
thedeamon
Posted Septem ber 8, 2010 at 1:14 pm | Perm alink
Azmi
Posted Septem ber 9, 2010 at 4:55 am | Perm alink
Hey!
I dont know how you saved my life. I shall thank you for thousand times for this and
once more thousand times for your efforts on this. It really w orked. Thank man,
appreciate it
491.
deeh
Posted Septem ber 9, 2010 at 8:13 am | Perm alink
Andy
Posted Septem ber 9, 2010 at 5:02 pm | Perm alink
Thank you so much! Its so simple and yet I could not manage to install W indow s from
USB. Now it finally w orked! Thanks!
493.
Ricky
Posted Septem ber 10, 2010 at 10:05 pm | Perm alink
Worked w ell for me, the only thing is I had to pull the drive out during the first reboot or
the install w ould start all over again.
494.
Gagandeep Singh
Posted Septem ber 11, 2010 at 8:00 am | Perm alink
HI.
This is Gagan from http://w w w .softw aresgiant.com and do you know that you have
converted by Web2PDFConvert.com
really helped me a lot?I had original w indow s 7 ultimate 32-bit DVD but it sisnot run on
my PC as I had no DVD player.So I made this bootable HD and am enjoying 7 because of
you.
Thanks
495.
Rets
Posted Septem ber 12, 2010 at 6:47 am | Perm alink
mary
Posted Septem ber 12, 2010 at 4:53 pm | Perm alink
matthew
Posted Septem ber 13, 2010 at 1:40 am | Perm alink
can i just say if u are using a bigger hard-drive eg a 250g external it takes about 1-2
hours to format to ntfs
498.
nando
Posted Septem ber 13, 2010 at 2:28 am | Perm alink
THANK YOU!! this guide is aw esome. w orked w ithout any problems.. and the speed of
install increased! now it installs about 5x faster.. it used to take 1 hour. now it took 20
minutes :O!!! thanks!
499.
MightyAL
Posted Septem ber 13, 2010 at 3:53 pm | Perm alink
Suraj Yadav
Posted Septem ber 14, 2010 at 2:06 pm | Perm alink
mikaboshi
Posted Septem ber 15, 2010 at 1:41 am | Perm alink
Shen
Posted Septem ber 15, 2010 at 5:52 am | Perm alink
W hen I follow ed this method, I manage to get the OS to boot from the USB, but then
that creates another problem. Vista confuses itself by reading the USB as another hard
drive. The error W indow s is unable to find a system volume that meets its criteria for
installation. show s up in the Disk Partition page. My computer only has one hard drive
so it must be the USB causing the problem. Can anyone tell me how to get around this
problem?
504.
ICHI
Posted Septem ber 15, 2010 at 1:38 pm | Perm alink
FrackMicrosoft
Posted Septem ber 16, 2010 at 12:03 am | Perm alink
This w ill w ork on non-vista computers if you use an external hard drive and skip the
format command.
506.
Boy XatZ
Posted Septem ber 16, 2010 at 6:58 pm | Perm alink
amazing this guide really w orked!!! plus you dont need to use any programs.. /heh
507.
Ryan
Posted Septem ber 17, 2010 at 12:02 pm | Perm alink
Is it just me or does it take more than just a few seconds to format the selected
drive????
converted by Web2PDFConvert.com
508.
Ryan
Posted Septem ber 17, 2010 at 12:03 pm | Perm alink
weeds season 6
Posted Septem ber 17, 2010 at 1:44 pm | Perm alink
Great w rite up!! this really helped me out and btw this can w ork on non-vista computers
if you use an external hard drive
510.
rohit
Posted Septem ber 17, 2010 at 1:44 pm | Perm alink
saif
Posted Septem ber 18, 2010 at 3:22 am | Perm alink
hi i m using w in xp above all steps done n my bios have option usb hdd but i its not
booting plz help
512.
Nith
Posted Septem ber 19, 2010 at 4:14 pm | Perm alink
Bane
Posted Septem ber 19, 2010 at 7:04 pm | Perm alink
hey, the guide is dreat but like some ppl here I have the missing bootmgr problem, You
sad fix it but how ??? please help me , I am trying to set w in 7 on HP notebook w ich
has vista, and your steps I^ve done on other PC w ich has w in 7 on it,because dvd rom
on notebook doesnt w ork. my USB drive is external HDD 1Tb.. folow ed all steps one by
one, then attached ext hdd on notebook and set booting from USB still have msg
missing bootmgr.
heeeeeeelp! thx!
515.
darkan9el
Posted Septem ber 19, 2010 at 8:09 pm | Perm alink
Aw esome tut, just got w indow s 7 32bit on my nieces Acer Aspire One, straight on
everything installed. Id say 10-20mins faster too than conventional DVD installs.
Pressed F2 on boot to get into setup, Acer Aspire w ill see the USB and show it by name,
I just moved it to the top of the Boot list using F6 saved changes and rebooted. Once
W 7 has installed you have to go back into setup (F2) to change the boot sequence back
to the HDD. Just finished updating. If only life w as this simples lol!
516.
justme!
Posted Septem ber 21, 2010 at 3:42 am | Perm alink
looks like a nice method but! how do i reverse the disk-on-key properties to its
defaults,i mean in this w hole procedure you actually change the file system of the diskon-key and some other properties,how to reverse all that?
517.
Sudheera
Posted Septem ber 22, 2010 at 2:16 pm | Perm alink
Tom
Posted Septem ber 23, 2010 at 2:49 am | Perm alink
Hey, Thanks! great guide. I even got it to w ork using W indow s XP!
Tom
519.
geoff
Posted Septem ber 24, 2010 at 4:59 pm | Perm alink
w hen you say copy ALL the files, does that mean hidden and system files contained
w ithin the CD? do you recommend drag/drop copy or a CMD Copy?
520.
dallas fox
Posted Septem ber 24, 2010 at 9:23 pm | Perm alink
w hat if the w indow s 7 copy isnt on a dvd but has been dow nloaded iso?
521.
kevin
Posted Septem ber 25, 2010 at 5:59 am | Perm alink
Actually /active= should have 0 (most of the time) its the partition number OF the drive
(0 as its formatted) otherw ise youll get invalid parameter.
522.
are_peace22
Posted Septem ber 26, 2010 at 10:12 am | Perm alink
unification
converted by Web2PDFConvert.com
Lucas
Posted Septem ber 27, 2010 at 10:13 am | Perm alink
unification
Posted Septem ber 27, 2010 at 7:57 pm | Perm alink
unification
Posted Septem ber 28, 2010 at 4:54 am | Perm alink
marcus
Posted Septem ber 28, 2010 at 6:28 am | Perm alink
i cant do the clean bit. error occured, unable to access. help pw eez
528.
jainil
Posted Septem ber 28, 2010 at 8:54 am | Perm alink
daniel plasencia
Posted Septem ber 29, 2010 at 7:33 am | Perm alink
thanx for the tips but i am getting a message saying could not map drive partition to the
associated volume device objects: acces is denied on step 7 can you help?
530.
ehsan
Posted Septem ber 29, 2010 at 4:14 pm | Perm alink
Prithviraj
Posted Septem ber 29, 2010 at 4:34 pm | Perm alink
Thanks a lot . Worked like a charm, very detailed and precise. Great job keep it up
532.
Dave Sanders
Posted Septem ber 29, 2010 at 7:42 pm | Perm alink
Great step by step instructions. Even though Ive done this dozens of times, its great to
have a site I can trust to refer to w hen my (poor) memory fails me.
Thanks!
Dave Sanders
Microsoft MVP
533.
Peyman
Posted Septem ber 29, 2010 at 7:59 pm | Perm alink
admin
Posted Septem ber 29, 2010 at 8:00 pm | Perm alink
Justin A
Posted O ctober 1, 2010 at 10:59 am | Perm alink
Beautiful! Flaw less! Stupid sata DVD died and w ith no replacement and no time to spare
this w orked perfectly. Make sure drive is emptied as he states. Make sure! Otherw ise,
aw esome. Thank yooouu.
536.
turnkey website
Posted O ctober 1, 2010 at 7:31 pm | Perm alink
i have a question that before reading this tutorial or finding it i bought a 2gb pen drive
and i think this procedure does not w ork w ith 2 gb pen drive or does it?
537.
Donna
converted by Web2PDFConvert.com
W OW Thanks a lot. It w orked like a charm. I really appreciate your help. Keep up the
good w ork. It is people like you that make the w orld a better place.
Thank agian
538.
Donna
Posted O ctober 2, 2010 at 10:06 am | Perm alink
Thanks again
539.
Sharma Mohit
Posted O ctober 3, 2010 at 9:57 pm | Perm alink
Trevor
Posted O ctober 4, 2010 at 12:56 am | Perm alink
Erik Hurtig
Posted O ctober 4, 2010 at 2:43 am | Perm alink
Jay Bee
Posted O ctober 4, 2010 at 6:40 am | Perm alink
This thread is getting long, but it is only fair to say thank you for this great guide. Thanks
a lot.
543.
AJIT
Posted O ctober 4, 2010 at 12:34 pm | Perm alink
Modeste
Posted O ctober 4, 2010 at 9:22 pm | Perm alink
Ankit
Posted O ctober 5, 2010 at 1:27 am | Perm alink
i am using w in7 32 bit. can i use bootsect to create a bootable USB to install w in7 64 bit?
i have the ISO file for w in7 64 bit, but have no clue how to get it to w ork.
PS- my DVD drive is kaput.
546.
Anggi
Posted O ctober 5, 2010 at 9:55 am | Perm alink
Doug
Posted O ctober 7, 2010 at 3:24 am | Perm alink
unification
Posted O ctober 7, 2010 at 5:09 am | Perm alink
JB
Posted O ctober 9, 2010 at 1:47 am | Perm alink
Since Im trying to make a LiveCD bootable through USB, its not a normal official
W indow s 7 CD, and there is no BOOTSECT.EXE w hatsoever, so I cant make it BOOTMGR
Compatible. Any other solutions?
550.
piyush
Posted O ctober 9, 2010 at 10:12 pm | Perm alink
my dvd w rite is not w orking.how can i do this step D: CD BOOT.pls mail me ans.
converted by Web2PDFConvert.com
551.
Nishant
Posted O ctober 10, 2010 at 12:26 am | Perm alink
Sandeep
Posted O ctober 11, 2010 at 5:30 pm | Perm alink
@nishant-this process only creates the w ay by w hich u can boot the setup progress w ith
the pendrivecomparatively faster than cd or dvds.the problem you are facing is due to
w rong installation files
553.
Kir
Posted O ctober 11, 2010 at 6:01 pm | Perm alink
Leo
Posted O ctober 12, 2010 at 1:13 am | Perm alink
Sam
Posted O ctober 12, 2010 at 6:05 pm | Perm alink
This w orked fabulously. Thanks for the easy to follow instructions! I had been looking for
this solution for a long time.
556.
Ionut
Posted O ctober 13, 2010 at 1:34 am | Perm alink
Thanks a lot.
Worked perfectly!
Very w ell described.
557.
Jamie Kitson
Posted O ctober 13, 2010 at 5:44 pm | Perm alink
You really should put a link to the MS USB/DVD tool more prominently on your site, w hy
bother w ith this complicated method?
http://store.microsoft.com/help/iso-tool
558.
Jony D Rico
Posted O ctober 14, 2010 at 7:40 am | Perm alink
Andres Au
Posted O ctober 16, 2010 at 6:20 am | Perm alink
You can also check the drive number designation in the device manager under disk
management if you have trouble selecting the appropriate disk as described in step four
of this guide.
560.
pempoy
Posted O ctober 16, 2010 at 12:36 pm | Perm alink
KB
Posted O ctober 16, 2010 at 9:36 pm | Perm alink
THanks for the insight, I w as going crazy trying to get this to w ork. A lot of sights miss
the part about this only w orking in Vista/7!
562.
JACK91
Posted O ctober 16, 2010 at 10:46 pm | Perm alink
Crypdan
Posted O ctober 17, 2010 at 3:30 am | Perm alink
W hen you say copy w indow s 7 contents, you mean the documents or a iso file?
564.
haroldcore
Posted O ctober 17, 2010 at 9:48 am | Perm alink
w hat if i dont have a w in7 disc? w hat if i just have an ISO but not on a cd. because i
have an ISO on my dow nloads.
converted by Web2PDFConvert.com
565.
AJ
Posted O ctober 18, 2010 at 10:53 pm | Perm alink
dvhirst
Posted O ctober 19, 2010 at 4:47 am | Perm alink
Well, it w orked as advertised (W indow s7), but only after going to Control Panel User
Account Control Settings and specifying Never notify. Before taking this step, the
Bootsect command failed w ith Access denied.
Now , on to setting up BartPE on this bootable 4GB USB drive
Thanks!
567.
KGB1953
Posted O ctober 19, 2010 at 1:19 pm | Perm alink
KGB1953
Posted O ctober 19, 2010 at 1:22 pm | Perm alink
If you have an .iso file just mount it w ith magiciso. Google it.
569.
c0de
Posted O ctober 19, 2010 at 11:58 pm | Perm alink
Jaimie
Posted O ctober 21, 2010 at 7:08 am | Perm alink
Samuel
Posted O ctober 23, 2010 at 6:31 am | Perm alink
PLEASE HELP!
I am having troubles w ith step 6:
I have typed in C:\W indow s|System32> D: CD BOOT
Then w hen I type in D:\> CD BOOT
it says that The System Cannot Find The Path Specified.
My disk is definitely in the drive and is definitely drive D: so w hat is w rong?
572.
elise sayer
Posted O ctober 24, 2010 at 7:02 am | Perm alink
make it w ork
573.
chielt
Posted O ctober 25, 2010 at 4:52 am | Perm alink
I have a 4GB usb pendrive. W hen I try to do CREATE PARTITION PRIMARY it tells me the
drive isnt big enough te create a partition w ithout extra parameters. Please advise.
574.
nikhil
Posted O ctober 25, 2010 at 10:54 am | Perm alink
Albert
Posted O ctober 25, 2010 at 11:10 am | Perm alink
hey, i keep getting invalid ms-dos command w hen copying the disk content in step 8.
576.
Albert
Posted O ctober 25, 2010 at 11:18 am | Perm alink
converted by Web2PDFConvert.com
shoab
Posted O ctober 26, 2010 at 3:06 am | Perm alink
sir pls tell me about how to create usb bootale for install w indow s xp-7 by usb device
like pen drive.
578.
SATHISH
Posted O ctober 29, 2010 at 7:11 pm | Perm alink
ya its really nice to do but in betw een i got some error .. but i think that the inspections
given above are really gud .., the same time after i did some steps my usb drives crashed
, after that i cant able to use d usb .., so please avoid stop in betw een.. thanks
579.
SATHISH
Posted O ctober 30, 2010 at 12:46 am | Perm alink
Hey Sorry For My Previous Post .., I Tried once again these steps i finally got thanks
Its Working Great .
580.
Thanks
paras kumar
Posted O ctober 30, 2010 at 8:56 pm | Perm alink
mukesh
Posted O ctober 31, 2010 at 2:37 pm | Perm alink
Vyom Neeraj
Posted Novem ber 1, 2010 at 3:29 pm | Perm alink
Great post..!! Follow ed all the instructions step by step and w orks like a charm..!!
The only tip is that this w ont w ork for xp since in xp, the MS DOS disk manager does not
show usb disks. it w ill only show the HDD as disk 0. There is no disk 1. But w hen i tried
w ith vista, then it show s usb as disk 1 and all the steps w orked easily.
Thanks again man..!!
583.
Jeffrey
Posted Novem ber 1, 2010 at 6:03 pm | Perm alink
SherwinQ
Posted Novem ber 4, 2010 at 10:03 am | Perm alink
marshmallow
Posted Novem ber 5, 2010 at 8:45 am | Perm alink
FilledVoid
Posted Novem ber 5, 2010 at 4:57 pm | Perm alink
This w orked perfectly for a system that I w as fixing w hich had a broken DVD drive. The
method used w as able to make my external drive bootable w ith Lenovos DVD image.
Thanks a ton.
587.
Alex789045
Posted Novem ber 6, 2010 at 6:26 am | Perm alink
Vash
Posted Novem ber 6, 2010 at 4:29 pm | Perm alink
hey bro ive read all the instructions, ive never try it myself but on about the comments
above, its a kind of 99% of believing you!!!hope i could make it!!!thanks
589.
bINK
Posted Novem ber 6, 2010 at 11:59 pm | Perm alink
thank you sir for your assistance on how to install w indow s from a usb , i have a oem cd
w ith all of the versions of w indow s on it and it w orks flaw lessly w ith the usb method . i
have sucsescfully install starter, basic, home premium x86, x64 , and so on but my faviort
useing this method is w hat i have on my asus mini netbook w ith 500 gb hard drive and 4
gb memory w ith w indow s 7 ultamate x64
590.
sandy
Posted Novem ber 7, 2010 at 2:08 pm | Perm alink
F:\BOOT>bootsect.exe /nt60 H:
Target volumes w ill be updated w ith BOOTMGR compatible bootcode.
converted by Web2PDFConvert.com
Could not map drive partitions to the associated volume device objects:
Access is denied.
dis is d error i am facing plz help me out
591.
sandy
Posted Novem ber 7, 2010 at 2:40 pm | Perm alink
lunatic
Posted Novem ber 7, 2010 at 9:35 pm | Perm alink
griff
Posted Novem ber 9, 2010 at 8:40 pm | Perm alink
James
Posted Novem ber 10, 2010 at 6:59 am | Perm alink
Deepak kumar
Posted Novem ber 10, 2010 at 8:13 pm | Perm alink
Alan
Posted Novem ber 11, 2010 at 3:22 pm | Perm alink
Much appreciated. I have an old Pc w ith org CD drive. It just w ouldnt read the W in 7 CD.
My HD w as dead and I had to install a new one. Luckily I had my laptop w ith W IN 7
installed. Took a w hile but w e are up and running again.
597.
1234
Posted Novem ber 11, 2010 at 7:43 pm | Perm alink
after instalation if i w ant to use my flash drive as a normal storing device, w hat do i have
to do?
just format? or it w ill stay a bootable device 4 evar?
598.
removals companies
Posted Novem ber 12, 2010 at 2:26 pm | Perm alink
David Brennan
Posted Novem ber 12, 2010 at 5:38 pm | Perm alink
One of your command prompt lines is formed incorrectly but w ill still w ork:
i.e.
D: CD BOOT
CD BOOT
should be just
D:
CD BOOT
or:
cd /d D:\BOOT
but the guide w orks perfectly anyhow . Thanks very much.
600.
dark8soul
Posted Novem ber 14, 2010 at 8:52 am | Perm alink
A random dude
Posted Novem ber 15, 2010 at 12:06 am | Perm alink
Right, it looks good, but Ive yet to try it, for a few reasons:
1. How do you reverse the process for the USB, in case I w ant to use it as normal again
after Ive booted up my PC w ith it? Can it be done? How ? Maybe it w orks anyw ay? I
dont w ant to ruin a good 16GB USB for it otherw ise.
2. Ive got my W in7 on an .ISO on my HDD, and I COULD install it using e.g DaemonTools
converted by Web2PDFConvert.com
or some such directly, but there are things that are better w ith a booted installation,
thus I w ant to go w ith that option. But, my question is this, can I do as w ith the CD/DVD
drive w ith a virtual drive, w here I mount the W in7 .ISO and do Step 6 w ith the mounted
drive?
Many thanks in advance!
602.
lacie
Posted Novem ber 16, 2010 at 2:47 am | Perm alink
thank you!
603.
Scott
Posted Novem ber 16, 2010 at 4:51 pm | Perm alink
Stle
Posted Novem ber 16, 2010 at 6:05 pm | Perm alink
Agana
Posted Novem ber 16, 2010 at 7:04 pm | Perm alink
SREEJITH
Posted Novem ber 19, 2010 at 6:48 am | Perm alink
Vici
Posted Novem ber 19, 2010 at 5:50 pm | Perm alink
Purushotham
Posted Novem ber 20, 2010 at 12:07 am | Perm alink
I did everything, but w hen I tried to boot, It says A disk read error occurred, Press
control+alt+del to restart.. Plz help me.
609.
Jason
Posted Novem ber 20, 2010 at 2:11 am | Perm alink
King Matt 85
Posted Novem ber 21, 2010 at 12:32 am | Perm alink
Zaq
Posted Novem ber 21, 2010 at 1:19 am | Perm alink
So i w as on a mission for a free netbook. the job w as to fix a laptop w ithout a cd drive
that w orked. SO i turned to this. needless to say. Thanks for the net book. Your a money
saver bud thank you!
612.
NEERAJ
Posted Novem ber 21, 2010 at 2:06 pm | Perm alink
kyle
Posted Novem ber 22, 2010 at 4:46 am | Perm alink
um in stuck at spet 7 help plz it says it does not recognize bootsect.exe as an interal or
external command
help plz
614.
kyle
Posted Novem ber 22, 2010 at 4:47 am | Perm alink
an
Posted Novem ber 22, 2010 at 10:23 pm | Perm alink
converted by Web2PDFConvert.com
616.
deamon
Posted Novem ber 23, 2010 at 3:32 am | Perm alink
freddyzdead
Posted Novem ber 23, 2010 at 10:38 am | Perm alink
If you really w ant to claim 100% Working then w hy is step 6 still w rong?
It says:
====================================================
D: CD BOOT and hit enter.W here D is your DVD drive letter.
CD BOOT and hit enter to see the below message.
====================================================
w hen it should say:
====================================================
D: and hit enter. W here D is your DVD drive letter.
CD BOOT and hit enter to see the below message.
====================================================
This is easy to fix and it is confusing a lot of people.
Also, I think FAT32 w ould w ork ok; speed difference w ould be insignificant.
And I think the BOOTSECT.EXE part is redundant because DISKPART prolly already did
that. Thats w hy some ppl have got it to w ork w hen they left out that step.
Anyw ay, the main thing is it w orks. You just need to shout in caps that it DOESNT W ORK
IN XP. Maybe the morons w ould see it then.
618.
Qiang
Posted Novem ber 23, 2010 at 1:47 pm | Perm alink
Michael
Posted Novem ber 24, 2010 at 12:34 am | Perm alink
I dont have any Drivers w hen I try to install W indow s 7 on my Netbook w ith no OS,
w hat do I do?
620.
mallikarjun
Posted Novem ber 25, 2010 at 11:08 pm | Perm alink
hey after copyin the files to usb, i tried to install it on other comp by changing the boot
order im getting a error BOOT MNGR MISSING please help me w ith this
621.
Ryan
Posted Novem ber 26, 2010 at 9:55 pm | Perm alink
i follow ed this instruction and I unfortunately 2 of my drives are now missing. i only have
my drive C visible
i am running w indow s 7(32bit) w ith 1 SATA HD(had 3 partitions now only C is visible) and
1 IDE HD
can someone please help me w ith this??
622.
magallanes
Posted Novem ber 27, 2010 at 3:53 am | Perm alink
Thanks.
btw , you can do (if you know that you pendrive is not defective):
FORMAT QUICK FS=NTFS
instead of
FORMAT FS=NTFS
623.
Andreas
Posted Novem ber 28, 2010 at 1:31 am | Perm alink
Hi, Ive tried to install w in 7 from usb using w intoflash but faild due to ther error that I
need cd/dvd drivers. The solution w as removing the usb and reinserting it then I
cancelled the setup and w ent to repair options. I then chose command prompt. After
reinserting the usb you w ill have 3 discs. Mine w ere X: w hich w as the boot disc
(supposedly the usb but it w asnt) c: (the usb after inserting it again) and d: (the cdrom). On the command prompt I had to navigate to X:\w indow s. (type: cd X:\w indow s
w ithout quotes) then type: bootsect /nt60 C: (this loads the bootmgr on the usb. the
usb in my case w as C: so you have to find yours) after that just restart and the setup
w ill continue w ithout errors. best of luck
624.
gride420
Posted Novem ber 28, 2010 at 3:26 am | Perm alink
great how too now i w ant a very easy how too on putting x86 and x64 bit of w indow s
and of vista on one disk. Then should be able to do this guide and have both on 1 thumb
drive. In the process of putting each os from xp up on 1 thumb drive each. Much faster
installs and no more burning disc. Thanks
converted by Web2PDFConvert.com
625.
ors
Posted Novem ber 28, 2010 at 10:52 am | Perm alink
All of you w ho get Could not map drive partition to the associated volume device
objects: Access is denied.
Try running cmd as administrator!
626.
l0stb3ta
Posted Novem ber 30, 2010 at 2:35 am | Perm alink
Out of curiosity, do folder permissions have to be set so that hidden files and folders
must be enabled? I tried this w ith my USB stick, and I get a missing operating system
error. I copied everything I could see from my W in7 DVD, but if there are hidden files on
the DVD that could explain the missing operating system error that both Jonathan and I
are getting.
627.
Daniel
Posted Novem ber 30, 2010 at 7:44 am | Perm alink
I have a Net Book that came w ith W indow s 7 Starter. I w ould like to install the Ultimate
Edition on it but it has no CD Drive. I got my hands on the W indow s file but they are in
ISO format ready to be copied to a disk and boot off of said disk. Is there a w ay I can
copy these files onto a Flash drive instead and boot off of the Flash drive?
628.
Gamer
Posted Decem ber 1, 2010 at 8:34 am | Perm alink
Thanks!
629.
nik
Posted Decem ber 1, 2010 at 9:15 am | Perm alink
anand
Posted Decem ber 3, 2010 at 4:34 am | Perm alink
shane
Posted Decem ber 3, 2010 at 8:12 am | Perm alink
i did this to a tablet pc that had no dvd-rom, and did NOT support USB boot option.i
simply yanked the drive from the tablet pc, connected it to a different pc via usb bridge,
follow ed the procedures above, put the hard drive BACK into the tablet pc, fired it up,
and w indow s began installation. Worked great, and didnt even create a second partition
to do it lol
632.
Eye Webmaster
Posted Decem ber 4, 2010 at 3:22 am | Perm alink
Thank for this article Ive made a w orking bootable USB of my ow n. I need this to make
my computer renew ed and prepare it for my SEO w ork task.
633.
Naval
Posted Decem ber 4, 2010 at 4:36 pm | Perm alink
I havent the w indow 7 dvd disk. can I use above tips for W indow s Xp or w here can I get
w in 7 files. pls help.
634.
LWN
Posted Decem ber 6, 2010 at 9:04 pm | Perm alink
Were in 2010, and for those of you that have had no success (ISO-file not recognized for
example) using the Microsoft ISO-tool mentioned on occasions in this thread, the real
solution that ALW AYS w orks is here:
http://firesage.com/bootsage.php
635.
MD
Posted Decem ber 7, 2010 at 6:28 am | Perm alink
AW ESOME dude!! This w orked 1st time, better than buttered popcorn
636.
Thomas
Posted Decem ber 9, 2010 at 12:33 am | Perm alink
zORG
Posted Decem ber 9, 2010 at 10:07 pm | Perm alink
bukag
Posted Decem ber 10, 2010 at 6:40 am | Perm alink
converted by Web2PDFConvert.com
639.
Easy123
Posted Decem ber 10, 2010 at 10:55 pm | Perm alink
I have used this method several times and it w orks GREAT. Instruction are very easy to
follow .
For those having trouble w ith not being able to copy the contents of the DVD to the
thumb drive b/c you dont have a DVD drive. I w ould suggest to either perform these
steps on a PC that has a drive or if you have a iso or a rar image of a DVD you can use
magiciso (free) to create a virtual CD ROM drive and then mount the image to a virtual
Drive.
Works GREAT.. I used this for Vista and W indow s 7 32 and 64 bit.
If you cant figure it out READ the instructions Carefully or take your USB thumb drive and
DVD to a local computer shop and have them do it for you. Make sure you give them this
sites URL b/c it w orks just fine. Quick and Easy.
Thanks
640.
Juan
Posted Decem ber 11, 2010 at 4:53 am | Perm alink
George
Posted Decem ber 11, 2010 at 12:32 pm | Perm alink
ice
Posted Decem ber 11, 2010 at 7:29 pm | Perm alink
Senthilkumar
Posted Decem ber 12, 2010 at 8:16 am | Perm alink
Khalid
Posted Decem ber 12, 2010 at 12:39 pm | Perm alink
Khalid
Posted Decem ber 12, 2010 at 12:42 pm | Perm alink
Khalid
Posted Decem ber 12, 2010 at 12:44 pm | Perm alink
please me give more details it required any softw are like w intoflash
647.
George
Posted Decem ber 14, 2010 at 5:40 am | Perm alink
To ice
Any idea about my issue?
converted by Web2PDFConvert.com
648.
Li Xin
Posted Decem ber 14, 2010 at 3:44 pm | Perm alink
sM4llziE
Posted Decem ber 14, 2010 at 6:57 pm | Perm alink
Wait.. Theres an official tool? You could have put that at the beginning xD
650.
Ice
Posted Decem ber 15, 2010 at 12:08 am | Perm alink
To George
reasech how to get BOOTMGR back on the HD.
The orginal problem, before you formated the HD, sounds like a bad Ram, run a memory
test in bios if you have it, or get a new ram chip if you can to make sure.
651.
LefterisTR
Posted Decem ber 15, 2010 at 2:51 am | Perm alink
w in7 usb
652.
paulette
Posted Decem ber 15, 2010 at 7:28 am | Perm alink
Hi. I have been trying to do this and I get stuck on this part w here it says to do:
Go back to command prompt and execute the follow ing commands:
D:CD BOOT and hit enter. W here D is your DVD drive letter.
CD BOOT and hit enter to see the below message.
BOOTSECT.EXE/NT60 H:
Is there something Im doing w rong? Also can this be done on a computer running
w indow s 7 for a vista? My desktop is w indow s 7 and my laptop w hich im trying to fix w as
vista. I erased everything on the laptop hard drive on my w indow s 7 computer so did
that mess it up?
I w ould appreciate any help.
Thanks
653.
paulette
Posted Decem ber 15, 2010 at 7:31 am | Perm alink
To George:
Did you figure it out? My laptop does the same thing w ith the blinking cursor and I have
tried everything I can think of.
Thanks
654.
Phil
Posted Decem ber 15, 2010 at 6:23 pm | Perm alink
I used this guide 3 times now , still havent gotten the commands tattooed on my
backbone.. but.. w orks 100% every time. I installed w in7 on my ow n laptop, my pc, one
w ork pc, and now using it on my girlfriends laptop. thanks a lot for the simple guide,
everyone saying it doesnt w ork, either arent follow ing the steps, or should check to see
that they arent trying to install w indow s on their w ashing machine or something. if u
follow the steps, it w ill w ork. I actually get a error message on the final step, but I have
still been able to complete the installation every time. thanks man, people like you are
w hat makes the w w w great.
Sincerely
Phil
655.
Nihar
Posted Decem ber 17, 2010 at 6:26 am | Perm alink
sintayehu
Posted Decem ber 17, 2010 at 7:06 pm | Perm alink
I am very glad right now . I w as highly frustrated because I thought my computer is not
gonna be compatible for w indow s 7. I tried many things even w ent to repair guys. Only
this page w orked for me. I thank you guys! really Im happy!
657.
Michael
Posted Decem ber 17, 2010 at 9:17 pm | Perm alink
Ajmal
Posted Decem ber 18, 2010 at 12:01 pm | Perm alink
I am using a 8GB usb, but in LIST BOOT command Disk 0 mean only hard disk is
mentioned no other disk there.
SO w hat to do?
659.
George
Posted Decem ber 18, 2010 at 12:10 pm | Perm alink
To Ice
Thanks, Ill give a try. I do not think its RAM issue though.
converted by Web2PDFConvert.com
To Paulette
Once I try it, Ill update you here.
660.
lambang
Posted Decem ber 18, 2010 at 12:39 pm | Perm alink
lambang
Posted Decem ber 18, 2010 at 12:45 pm | Perm alink
hisham
Posted Decem ber 18, 2010 at 8:39 pm | Perm alink
maryam
Posted Decem ber 18, 2010 at 9:02 pm | Perm alink
excellent..
Thanks a lot
664.
sumit
Posted Decem ber 19, 2010 at 6:08 pm | Perm alink
hi i have not yet checked it w hether this w orks or not but hope for best.
665.
Stanislavsky
Posted Decem ber 19, 2010 at 11:16 pm | Perm alink
Thank you sooo much for the guide, really simple to follow up !!!
Kudos for you and your w ebsite !!
666.
BOSS
Posted Decem ber 20, 2010 at 5:29 am | Perm alink
Srinivasan
Posted Decem ber 20, 2010 at 10:43 am | Perm alink
raj
Posted Decem ber 20, 2010 at 10:41 pm | Perm alink
Abhilash Thomas
Posted Decem ber 22, 2010 at 1:02 am | Perm alink
Perfect!!!!!!!!!!!!!! Its realy w orking for me.. you are realy genious.. thanks man
670.
sms
Posted Decem ber 22, 2010 at 2:05 am | Perm alink
Jaques
Posted Decem ber 22, 2010 at 4:02 am | Perm alink
Been going through guides and suggestions all over the place this evening, but I found
this;
http://w w w .computerbild.de/dow nload/W inToFlash-4776317.html?dl=1
That just w orks, you just need your W in CD and a 4GB+ USB drive and you are all set
672.
mar mar
Posted Decem ber 22, 2010 at 4:15 am | Perm alink
ok w hat do i do if i dont have the disk but i do have all the stuff i need saved on another
flash drive?
673.
Max
Posted Decem ber 22, 2010 at 8:15 pm | Perm alink
converted by Web2PDFConvert.com
I have only one question, can i make the bootable flash drive on any w in, i mean, im
using xp and i w ant to make w in7 x64 bootable flash drive, is that possible?
674.
victor
Posted Decem ber 22, 2010 at 10:01 pm | Perm alink
peety
Posted Decem ber 22, 2010 at 11:43 pm | Perm alink
very nice guide. thanks. only issue im having is its taking FOREVER to format a 8gb usb
drive
676.
peety
Posted Decem ber 22, 2010 at 11:45 pm | Perm alink
Xao
Posted Decem ber 23, 2010 at 12:24 am | Perm alink
this tutorial w orks only w ith the computer u have made the changes? or if i plug out the
usb and put it in other computer it w ill w ork!?
678.
MSW SUX
Posted Decem ber 23, 2010 at 1:00 am | Perm alink
Win7easyinstall
Posted Decem ber 23, 2010 at 1:27 am | Perm alink
Hi all!
Here are some tips.
1. Can only be created from a computer running W indow s 7 or Vista
2. You can only create a drive that is the same type as the os your using. i.e. 64bit drives
cannot be made on 32bit installed!
3. Do not install to flash/pen/usb drive, install to hard drive!
4. Make sure you have backed up all your data since this is clean install.
5. Format and install speeds vary depending on your flash drive and its capacity. i.e. A
4GB drive w ill be quicker at formatting than a 8GB model.
Hope this helped!
@marmar
Dow nload a program that can create .iso files or if you have the .iso on another drive
simply mount w ith Virtual Clone Drive or Daemon Tools (Virtual Clone Drive is easier, once
you have got the .iso w ith all the files in mount and use the virtual disk drive letter in the
cmd and it should be easy!
Thanks,
W in7easyinstall
680.
Win7easyinstall
Posted Decem ber 23, 2010 at 2:56 pm | Perm alink
Chandan SIngh
Posted Decem ber 24, 2010 at 1:12 am | Perm alink
Bill Brown
Posted Decem ber 24, 2010 at 4:41 am | Perm alink
Please help me its not w orking!??!?!!? I got an error during my first install so I checked
to make sure my hardrive w as okay. I opened it up and noticed a w ire w as disconnected
so I soldered it back in place(Im rather smart hardw are type stuff) and then I further
proceeded to make sure the physical hard drive disk didnt have any scratches on it (it
w as pretty clean). So yea, It is beyond me w hy it is not w orking, have any ideas?
683.
WildSchatz
Posted Decem ber 24, 2010 at 6:59 am | Perm alink
Man, thank you for making my W in7 USB installation as easy as possible. You steps
w orked like a charm. Had to go this route after the DVD installation w ould error out.
Thanks again!!
684.
Eddie K.
Posted Decem ber 24, 2010 at 2:28 pm | Perm alink
Use your brain, put the UPDATE call in the first line not in the last one! This is all a w aste
of time since MS Tool does it all instantly.
converted by Web2PDFConvert.com
685.
LlF
Posted Decem ber 24, 2010 at 2:49 pm | Perm alink
spag
Posted Decem ber 26, 2010 at 11:55 pm | Perm alink
Hey, the instructions w ere great! during the installation process, setup returned to the
initial installation screen instead of restarting after expanding the files. I rebooted the
computer and after that it finished setup w ithout issue.
687.
Bradley Rimbleus
Posted Decem ber 27, 2010 at 3:59 am | Perm alink
Andrew Benson
Posted Decem ber 27, 2010 at 1:10 pm | Perm alink
Thou art a god among men, and I shalt w orship thou as such. No seriously this is the
most useful thing I have seen the past tw o years. You have saved w hat little life I
actually have.
689.
Ted Allen
Posted Decem ber 27, 2010 at 11:07 pm | Perm alink
Aw esome! Well w ritten, easy to understand, and w orked w ell. Thank you!
690.
james mccoy
Posted Decem ber 28, 2010 at 5:31 am | Perm alink
aw esome tutorial
691.
Alan
Posted Decem ber 28, 2010 at 9:01 am | Perm alink
lee
Posted Decem ber 28, 2010 at 2:08 pm | Perm alink
aw seome
693.
Mark D
Posted Decem ber 29, 2010 at 2:38 am | Perm alink
Make sure you run the command prompt as Administrator if you are doing this w ithin
W indow s 7.
694.
Anthony Maes
Posted Decem ber 29, 2010 at 8:50 pm | Perm alink
Hi, thanks for the tutorial, this w as thew only one that w orked over netw ork. LAN. BooT.
695.
arthur
Posted Decem ber 30, 2010 at 1:44 pm | Perm alink
this is great! I accidentally erased all the content of my external drive during the process
but its my fault.that doesnt matter anyw ay I can install W indow s 7 Ultimate to a
computer from usb flash drive now .thank you!
696.
Tobias
Posted Decem ber 31, 2010 at 3:03 am | Perm alink
chrisNova777
Posted January 1, 2011 at 6:19 am | Perm alink
the steps are now here near difficult to follow , but this just flat out doesnt seem to w ork
for me, I alw ays alw ays alw ays get the BCD Boot Error :
file : BootBCD
status : 0xc000000e
info : An error occurred w hile attempting to read the boot configuration
w hen trying to boot.. Can anyone point out w hat could be causing this? w hich
thumbdrives are people using here that have experienced success?? ive tried w ith a
patriot Xporter XT 8gb and a Lexar 8gb Secure and no go so far w ith either of them
converted by Web2PDFConvert.com
698.
chrisNova777
Posted January 1, 2011 at 6:35 am | Perm alink
ok so i just tested the usb from the patriot xporter XT and it w orks on the machine ive
created it on, but not on the machine im trying to use it to install on, do you have to
make the disk on the machine that you are using it on?
699.
TheOriginalPol
Posted January 1, 2011 at 12:29 pm | Perm alink
THANK YOU! I really do appreciate you w riting instructions on how to properly do this. I
saw a bunch of those guides w here folks said to just copy all the files over to a FAT32
drive and I knew that couldnt be right sure enough it w ouldnt w ork for me. You are a
gentleman and a scholar.
700.
vamsee
Posted January 3, 2011 at 1:02 am | Perm alink
its w orking fine.. but problem is that booting started automatically from pen drive and
files expanded then w hen it restarted in the middle again booting started from
beginning by reading files from usb its an unending cycle w at to do??? im panicked.
tell a solution asap
701.
darkathena
Posted January 3, 2011 at 3:24 am | Perm alink
Tastyklean
Posted January 3, 2011 at 5:22 am | Perm alink
I like the fact that people w ill follow all steps but fail to read the title. Its A Tutorial For
Vista And 7 Based Systems. Xp Does Not Have The Tools To Do This.
Anyw ay.
Life Saver Thanks Buddy !
703.
Bradley
Posted January 3, 2011 at 9:59 am | Perm alink
Jeremy
Posted January 4, 2011 at 4:49 am | Perm alink
Hello,
Some motherboards, (like mine,) DO support booting from USB, but the bis lists USB
devices as Hard Disks instead of Removable. So in order to get it to boot from USB you
must change the hard disk boot order. So w hen you are installing w indow s 7 it comes to
a point w here it needs to reboot to finish the installation. But w hen it reboots it begins
the install sequence all over again. This is because it booted from the USB again.
FIX:
-just w atch and w ait for the reboot, then hold del or w hatever key gets you to your
bios on your system. then sw itch the hard disk boot order back to device #1 being the
partition w here you chose to install w indow s.
voila! your install w ill continue as normal.
BTW my motherboard is ASUS P5N-D
Also, this guide is totally aw esome w orks perfectly, thank you.
Jeremy
705.
Jeremy
Posted January 4, 2011 at 5:10 am | Perm alink
my previous post w as directed to vamsee of post #713 to answ er the question there.
706.
Saravanan
Posted January 6, 2011 at 12:42 pm | Perm alink
Grafi?no Oblikovanje
Posted January 7, 2011 at 6:09 am | Perm alink
FREDDY U.
Posted January 7, 2011 at 9:02 am | Perm alink
IT W ORKED 100%
JUST FOLLOW EVERY STEP AND THATS IT.
converted by Web2PDFConvert.com
709.
Danny
Posted January 7, 2011 at 10:55 pm | Perm alink
I w onder if anyone has accidentally formatted the w rong drive aka Disk 0. Would be a
laugh.
710.
ankkit
Posted January 8, 2011 at 10:31 pm | Perm alink
dallas
Posted January 9, 2011 at 4:35 am | Perm alink
hey so if i put my copy of w indow s 7 on flashdrive it should boot right. i do not have
w indow s 7 disk the file is just in my computer. so do i just put it on flashdrive then
follow next steps
712.
ARC
Posted January 9, 2011 at 11:32 am | Perm alink
not w orking the 1st time i try it. im on 2nd attempt now . the thing is, i keep my w indow s
installer file and everything on my hard disk(H) and not dvd/cd. So, does it mean that I
have to alter the 6th step correspond to the letter of my hard disk?
713.
japex
Posted January 9, 2011 at 6:12 pm | Perm alink
No device drivers w ere found. Make sure that the installation media contains the correct
drivers, and then click ok
i can reach the Install part but then it comes up w ith the error message above. i
cannot load drivers since w hen i brow se. i cannot seem to see the USB. ive put an AHCI
and Chipset driver there but cant brow se because i cant see it. help pls.
help please. putang ina kasi tong gumaw a ng tutorial eh. gago.
714.
Damon D.
Posted January 10, 2011 at 1:08 am | Perm alink
Andreas
Posted January 10, 2011 at 4:17 pm | Perm alink
romance
Posted January 10, 2011 at 6:10 pm | Perm alink
hi, in step 4, uve mentioned to format the pen drive. i did it but the process is very slow
because the format command is applicable for thorough formatting. can i format the pen
drive in that step in quick mode? thnkx
717.
Juna
Posted January 11, 2011 at 5:11 am | Perm alink
I follow ed these instructions to the letter. Diskpart show ed my USB drive to be disk 3. I
formatted disk 3. W hoops, my 250 Gb data drive just lost everything on it! <:-{
W hy tell people to use such a truly shit utility as diskpart w hen you can format a disk
from W indow s Explorer?
718.
David C.
Posted January 11, 2011 at 6:37 am | Perm alink
sd
Posted January 12, 2011 at 1:31 pm | Perm alink
This version of F:boot\bootsect.exe is not compatible w ith the version of W indow s youre
running. Check your computers system information to see w hether you need a X86 (32Bit) or X64(64-Bit) version of the program, and then contact the softw are publisher.
720.
Ankit singh
Posted January 12, 2011 at 3:08 pm | Perm alink
hi,
my cd drive is not w orking and w hen i put any usb drive and boot my system it show s
some error like disk not found.
please help me. i w ant to use w indow s 7 on my laptop.
721.
Chucho
Posted January 13, 2011 at 7:14 am | Perm alink
converted by Web2PDFConvert.com
722.
D.R.Kurrey
Posted January 13, 2011 at 11:20 pm | Perm alink
There is problem !
Operating System not found
723.
D.R.Kurrey
Posted January 13, 2011 at 11:21 pm | Perm alink
Shivams
Posted January 14, 2011 at 2:11 pm | Perm alink
Thanks for ur post. But w hen im installing w in7 through usb w en it is restarting for the
first time it is again automatically going boot again. Thus my installation stopped in the
middle. Please help me in installing my OS..
Thanks,
regards,
Shivams
725.
Anshul Kataria
Posted January 14, 2011 at 4:28 pm | Perm alink
hey bro i dont have cd of w indow s 7 but i have an iso image of it in my drive. How to use
this process w ithout cd?
please tell
726.
admin
Posted January 14, 2011 at 4:34 pm | Perm alink
Anshul Kataria, please use Virtual Clone Drive (free) softw are to mount the ISO file.
727.
TED E
Posted January 14, 2011 at 8:27 pm | Perm alink
I locked at step 5 i thing the problem w as my anti virus program turn it of and voila!
728.
Tyler Perry
Posted January 15, 2011 at 12:43 pm | Perm alink
I tried to install W in xp on my EEEpc 1000H but for some reason it w ouldnt boot unless i
put the USB stick in.lol, its mad w hen W in 7 is much easier to setup and install than XP.
729.
PIyush
Posted January 15, 2011 at 8:09 pm | Perm alink
Thanks
730.
Moniz
Posted January 16, 2011 at 2:37 pm | Perm alink
GLa5s
Posted January 17, 2011 at 3:34 am | Perm alink
W hat if I am doing this on a netbook w here there is no dvd drive but I have the files on
my desktop already? I am lost on w hat to type in w hen the instructions say to insert dvd
732.
kathir
Posted January 19, 2011 at 9:59 am | Perm alink
Ankit
Posted January 19, 2011 at 2:40 pm | Perm alink
thanks m8,
many many thanks.. w ith my optical drive malfunction, I had no other option to reinstall
the OS, you really hav been of great help.. thanks again..
734.
Helmi
Posted January 19, 2011 at 7:15 pm | Perm alink
walent
Posted January 20, 2011 at 10:20 pm | Perm alink
kregg
Posted January 21, 2011 at 4:42 am | Perm alink
Uhh guys You do realise there is a W indow s 7 USB/DVD Dow nload tool that does all
this ridiculous hard w ork for you, right? And its from Microsoft too.
Save yourself 5 hours and use that instead.
converted by Web2PDFConvert.com
737.
juozas
Posted January 21, 2011 at 2:28 pm | Perm alink
Sanjay
Posted January 21, 2011 at 11:13 pm | Perm alink
Jonathan
Posted January 22, 2011 at 6:43 pm | Perm alink
Eumesmo
Posted January 24, 2011 at 3:44 am | Perm alink
You can also try BOOTICE to set partition active and w rite W indow s 7 boot sector
741.
denbang
Posted January 24, 2011 at 5:53 pm | Perm alink
GOOD WORK
Posted January 24, 2011 at 8:14 pm | Perm alink
thanks alot
743.
Shashi
Posted January 25, 2011 at 12:59 am | Perm alink
Goog for this information and w e can load tw o operating system in USB so that w e can
insatll at time w indow s 7 or w indow s server 2008
744.
Thebest**
Posted January 25, 2011 at 4:01 am | Perm alink
The best tutorial, i have used this many times w ithout any problems and it rocks any
time w ith no problems thanks for posting this
745.
Chris
Posted January 25, 2011 at 5:58 am | Perm alink
Hey follow ed the instructions and everything seems to w ork to a point. W hen w indow s
starts it gives me the splash screen that says Install W indow s or w hatever, w hen I
click it the box disappears for a second, and then reappears. Cant actually get to the
install, w eird.
746.
bohari
Posted January 25, 2011 at 6:04 am | Perm alink
Manjunath
Posted January 26, 2011 at 3:42 pm | Perm alink
Helped me very much to install w indow s 7 using usb. Just ensure that you run Command
Prompt as Run As Adminstrator (Right Click Option on cmd). I w asted much time using
normal mode.
748.
bmac3
Posted January 26, 2011 at 9:23 pm | Perm alink
Guys please help me. CMD crashed w hen I w as doing the FORMAT FS=NTFS at 23%. Now
my USB-Stick isnt w orking because it is displayed as NTFS. I cant access it at all. How
can I get it right again?
749.
vikrant
Posted January 27, 2011 at 12:32 am | Perm alink
Cristian
Posted January 27, 2011 at 2:09 am | Perm alink
i did everything but i w anted to install but w hat w ill i have to do in the bios setup?
751.
Hey i am trying to follow your steps But w hen i w rite BOOTSECT.EXE /NT60 F:(MY USB
DRIVE LETTER IS F) THEN I GOT THIS MSG
TARGET VOLUMES W ILL BE UPDATED W ITH BOOTMGR COMPATIBLE BOOTCODE.
COULD NOT MAP DRIVE TO THE PARTITIONS TO THE ASSOCIATED VOLUME DEVICE
OBJECT
W HAT TO DO ?
752.
shahin
Posted January 27, 2011 at 9:55 pm | Perm alink
converted by Web2PDFConvert.com
Thanks.
753.
Jan
Posted January 28, 2011 at 9:56 am | Perm alink
Hi. i have follow ed you guide and i got to boot the usb successfully, but w hen w indow s 7
starts. it doesnt get to the installation process, its just stock on the w indow s 7
background and the mouse pointer, w hat do you think is the problem? is my
motherboard not compatible ? i have asus p5sd2-vm. or is it w ith my installer that has
the problem?
thanks in advance!
754.
piet
Posted January 29, 2011 at 7:44 pm | Perm alink
Tony
Posted January 29, 2011 at 8:58 pm | Perm alink
Putra Haikal
Posted January 29, 2011 at 9:46 pm | Perm alink
Hi there,
this guide is w orking fine.
thank you for shared w ith us
757.
gez
Posted January 30, 2011 at 4:48 am | Perm alink
@ Jan
Just leave it, it w ill eventually bring up the language option and continue..it just takes
about 5-10 mins and appears as nothing is happening..just be patient!
758.
hAMMAD
Posted January 30, 2011 at 3:57 pm | Perm alink
Some times /nt60 do not w ork for w hatever reason then w e can use /nt52.
759.
Eason
Posted January 30, 2011 at 10:13 pm | Perm alink
just me
Posted January 31, 2011 at 1:21 am | Perm alink
w ish you w ould have stated that if you do not have a w in 7 dvd/cd, and the info is
already on your flash drive, proceed to step #x. I just w iped out my usb drive w hich had
all of my w in 7 data on it. thanks a lot!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
761.
Al
Posted January 31, 2011 at 4:25 am | Perm alink
Joe
Posted January 31, 2011 at 6:50 am | Perm alink
Bachir
Posted January 31, 2011 at 11:22 pm | Perm alink
Any one faced this message w hen trying to copy file into USB stick? Cant read from the
source file or disk. bootsect.exe.mui". W hen I presses skip I got same message for
other file names!!!!!
Post #441 had teh same problem
regards
764.
Thomas
Posted February 1, 2011 at 2:15 am | Perm alink
If you have access denied error, run cmd in run as adminstrator mode.
converted by Web2PDFConvert.com
765.
Andreas
Posted February 1, 2011 at 9:35 am | Perm alink
Works just as described. Thanks very much, saved my bacon after realizing Mom-in-Law s
PC didnt have DVD drive.
To Al: had same error. Make sure you are running CMD as Admin. If it doesnt prompt you
for permission on launch, you didnt launch it right. Use the right-click run as
administrator option.
766.
balaji
Posted February 2, 2011 at 1:39 am | Perm alink
Hi, i w ould like you to guide me that how can i deploy xp/vista/w indow s7 w herein the os
to be loaded from the centralized server to the client desktops. Is there any softw are or
freew ares available. Can anyone help me how to proceed w ith
767.
PerT
Posted February 2, 2011 at 3:44 am | Perm alink
Hi Al
I had the same look at #577 and change to never notify
BUT I had to reboot after I changed to never notify before it w orked.
After reboot you can go step 6 by open the cmd again.
768.
Dark
Posted February 2, 2011 at 5:48 am | Perm alink
Shane
Posted February 2, 2011 at 2:13 pm | Perm alink
Worked a treat !!
Thanks !
(remember guys right click on the cmd to run as administrator or the boosect.exe w ont
w ork)
770.
NOOR
Posted February 4, 2011 at 3:41 pm | Perm alink
HI !!!
Im Palestinian , So please excuse my English!!
I w ant to ask about the commands
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Are these commands affect the machine Im w orking in ?
I have a w indow s CD BUT My lptp DVD machine is out of w ork , and i need to install
w indow s 7 on my lptp
IF I used this guides to install the CD contents to USB on my friend lptp ,,, does this
affect hers ?
Thanks a lot
771.
phil
Posted February 4, 2011 at 8:17 pm | Perm alink
anjan rai
Posted February 5, 2011 at 1:31 am | Perm alink
Hey man, thanks a lot. i w as searching this type of method from last few days and now i
got sucess. it really w orked. THANKS alot bro.
773.
lunjanie2
Posted February 6, 2011 at 2:15 am | Perm alink
After using BOOTSECT letter on the USB drive chnaged from F: to G:, if that is of help for
someone there. Check the drive letter before doing step 7
774.
Katherine
Posted February 6, 2011 at 1:20 pm | Perm alink
I cant figured out w hats going on >__> Ive changed the bios and I get an error.
bootmgr cannot be found
775.
Manindra Agrawal
Posted February 6, 2011 at 7:48 pm | Perm alink
hi Thnx a lot its w ork properly. if i w ant to make Bootable USB for XP
is i w ill follow above steps or some other steps
converted by Web2PDFConvert.com
Thnx for it
776.
Israel
Posted February 6, 2011 at 10:21 pm | Perm alink
Worked perfect
Tryed w ith 7, 32 and 64 bits
Ty
777.
Bhupend
Posted February 8, 2011 at 10:45 pm | Perm alink
it w orks
778.
moksha
Posted February 10, 2011 at 7:12 pm | Perm alink
Thanks a million tonne. Youre a savior. This really w orks. My DVD drive isnt w orking and I
had no choice.
779.
LeAnna
Posted February 10, 2011 at 8:32 pm | Perm alink
Thanks for the great DIY article! One question: w hat to do for people w ithout the
W indow s7/Vista DVD? Softw are came pre-installed w ith licenses stick to the bottom of
the netbook.
780.
DR
Posted February 12, 2011 at 1:10 am | Perm alink
How do i get my USB flash drive to function as a mass storage device again?
781.
Florin
Posted February 12, 2011 at 1:52 am | Perm alink
I tried to install the w ay this tutorial said but at the formating the memory stick as NTFS
it taked me samething more than 1 hour and got an error of formating also. So I had
formated as NTFS in W indow s 7 and copyed the files from the w in7 image mounted w ith
daemon tools (drag & drop I had unchecked Hide protected operating system files
from Folder and search options)and w orked just fine w ith installing w indow s 7 on
another computer.
782.
nainglinn
Posted February 12, 2011 at 11:59 pm | Perm alink
It can do bootable usb w ith Transcend . I have tried to do bootable drive w ith Verico usb
but I cannt .
783.
DIODIM
Posted February 13, 2011 at 1:38 am | Perm alink
Jason
Posted February 13, 2011 at 3:49 am | Perm alink
Thanks! This really help me out in a jam. Not having a dvd-rom w ith my netbook can be a
pain at times.
785.
Joao
Posted February 14, 2011 at 7:46 pm | Perm alink
Worked great! Dell Optiplex 160 no DVD ram, only USB. Thanks!
786.
JIM
Posted February 16, 2011 at 10:05 am | Perm alink
thanks alot
787.
Michael
Posted February 16, 2011 at 4:22 pm | Perm alink
LIST DISK only show s my 2 local harddisk, and not the USB flash drive.
788.
Jaideep Arora
Posted February 16, 2011 at 11:52 pm | Perm alink
Elli Bagelman
Posted February 17, 2011 at 12:55 am | Perm alink
Jaideep Arora
Posted February 17, 2011 at 1:31 am | Perm alink
converted by Web2PDFConvert.com
anonymous
Posted February 17, 2011 at 6:24 pm | Perm alink
sir w hen i type list disk , my USB volume is not listed, please help !!!
792.
killer_boy
Posted February 18, 2011 at 6:01 pm | Perm alink
ive been follow ur steps and instruction to the last steps.. but after the bootsect.exe
part ive got this
target volumes w ill be update w ith BOOTMGR compatible bootcode.
could not map drive partitions to the associated volume device objects: access denied.
can u help me w ith this thing please..
793.
asanka
Posted February 18, 2011 at 9:33 pm | Perm alink
josh
Posted February 19, 2011 at 2:47 am | Perm alink
can i use w in to flash and get the file on to my usb and follow the steps? if so w hat file
type should it be after i format so the cpu can read it?
795.
RAJU THOKAR
Posted February 19, 2011 at 6:10 pm | Perm alink
How to copy the w indow s 7 on Flash drive, directly copy and paste as w e usually do in
Flash drive or through command?
796.
Christian
Posted February 20, 2011 at 9:30 am | Perm alink
Thank you so much this w as the easiest install Ive ever done.
797.
Arjun3111
Posted February 20, 2011 at 10:24 am | Perm alink
Erik
Posted February 20, 2011 at 12:32 pm | Perm alink
can i do that all that w ork in my desktop for formating my laptop, or all this w ork have to
be in that computer w ich w ill be formated?
799.
franz99
Posted February 20, 2011 at 2:44 pm | Perm alink
I follow ed sucessfully all the steps of this guide under W indow s 7 Pro but w hen booting
on my USB pendrive
I get the same error as mentionned earlier by madmax :
file : \Boot\BCD
status : 0xc000000e
info : An error occurred w hile attempting to read the boot configuration
I could not find in this discussion above any answ er to madmaxs question so could
please help us
Do you think this error message related to the preparation of the USB pendrive or to the
capabilities of my mainboard ?
I get the same error message w hen using the official MS Tool
http://w w w .intow indow s.com/how -to-create-bootable-w indow s-7-usb-to-installw indow s-7-from-usb-flash-drive-using-w indow s-7-dvdusb-tool/
800.
Asger
Posted February 20, 2011 at 3:14 pm | Perm alink
flex
Posted February 21, 2011 at 1:14 am | Perm alink
Alex
Posted February 22, 2011 at 4:15 am | Perm alink
Hi,
thanks for the support it w orked perfectly!!!
converted by Web2PDFConvert.com
i have a little problem altough, i used my phone memory card as boot usb and now i
cant use it in the phone again, somehow the phone cant recognise it how can i fix it?
803.
Gaurav
Posted February 23, 2011 at 3:03 pm | Perm alink
Ajmat husain
Posted February 24, 2011 at 2:16 pm | Perm alink
Sunmaster14
Posted February 25, 2011 at 8:07 am | Perm alink
to avoid ACCESS DENIED errors, run cmd from system 32 folder Run As Administrator
806.
HakuginLabs
Posted February 25, 2011 at 3:33 pm | Perm alink
For those having issues w ith not having a dvd to copy the files from. Use a virtual drive,
there are a few good free programs that w ill mount iso images into a virtual dvd drive.
For people having issues w ith the bootsect.exe step, you w ill need to make sure you are
using a 64bit OS to create a 64bit usb installer. I ran into this myself using 32bit vista on
one of my laptops. I had to use my 64bit vista laptop to create a 64bit w indow s 7 usb
isntaller for my netbook.
And remember to run Command Prompt as admin, if you run into issues w ith cmd prompt
dropping admin privileges after exiting diskpart, you may be having an issue w ith the
UAC. Just open a new cmd prompt as admin (easiest fix).
Great guide btw . Allow ed me to format and reinstall 7 (using the DVD provided by the
manufacturer) on a netbook w ithout using an external dvd drive w hich I did not have the
money to buy.
807.
HakuginLabs
Posted February 25, 2011 at 3:37 pm | Perm alink
@Alex
Sorry, forgot to add this to my previous comment.
There are a few options for restoring the memory card to being usable in your phone.
Option 1: Delete the partition and create a new fat32 partition (Ive noticed a lot of
phones dont recognize ntfs easily, some do). This is the easiest option
Option 2: This is for advanced pc users.. You can dow nload and burn off a Live version
of linux that w ill boot from disc and provide a full linux environment and use a disk
partitioning program like gparted or Disk Utility
I recommend option 1, w orked for a co-w orker that had run into the same issue.
808.
alexander
Posted February 26, 2011 at 6:13 am | Perm alink
hi,
thanks for the answ er! sorry for being stupid, but how do i delete the partition?
809.
:)
Mark Anthony
Posted February 27, 2011 at 7:14 am | Perm alink
Sunil Rana
Posted February 27, 2011 at 2:58 pm | Perm alink
I have got a problem w ith my laptop that it is comfortably running the video DVDs but it
is not detecting the bootable DVD. How can i install the w indow s. Shall i copy the
contents of DIsc image file in to USB and then make USB bootable and boot through it..
Please suggest ..
811.
nobbler
Posted February 27, 2011 at 10:57 pm | Perm alink
Great stuff. Worked like a charm. I tried another method that didnt boot at all, but this
one w orked on the 1st try. I dir get an ACCESS DENIED w hen it tried to lock the disk for
the bootsect.exe /NT60 h: command, but it w orked anyw ay. If you do it this w ay youll
end up w here you w anna be. Thanks!
812.
Ajmal Khan
Posted February 28, 2011 at 6:43 pm | Perm alink
Hi
I have got the problem in step 4.
In step 4 my flash drive do not show in command promt.
please solve the problem and reply me. Thanks
813.
joe
Posted March 1, 2011 at 5:35 am | Perm alink
converted by Web2PDFConvert.com
Can I use an sd card instead? I tried and it cant create a partition w hen I type in create
partition primary.
814.
bharathp
Posted March 1, 2011 at 10:48 am | Perm alink
i tried the steps suggested to format laptop using usb . in second step i typed LIST DISK
815.
bharathp
Posted March 1, 2011 at 10:58 am | Perm alink
i tried the steps suggested to format laptop using usb after insert the usb(pen drive
4gp) in usb port. in second step i typed LIST DISK . it list out disk0 only. it did not list any
other disks such as disk1 for usb that i w as inserted. so i cant proceed further .please
tell me that how can i proceed further.
816.
Ryan
Posted March 1, 2011 at 2:32 pm | Perm alink
Everything w ent smoothly and I could boot from the USB but after that there is a
message thy says: Bootmgr missing press ctl alt del to restart how to fix?
817.
aRjay T.
Posted March 2, 2011 at 12:35 am | Perm alink
Hi! I have been using this How to coz its really w orking. One observation though, after I
converted the usb as a bootable w in7 installer, I couldnt use it as file storage anymore.
This happend to a brand new usb as w ell as my good old usb that has w rite protect
sw itch.
Everytime I try to store files on an already bootable usb, its as if the the system releases
the usb (like as if I ejected it) then after a few seconds, the system detects it again that
its there and w ill offer for a scan for error. If I choose to scan, it w ont push through and
re-offers it again and again.
Btw , I cant format nor do anything to the usbs partition.
818.
puthea
Posted March 2, 2011 at 5:43 am | Perm alink
Clint Sulis
Posted March 2, 2011 at 7:07 am | Perm alink
This is a perfect guide that does exactly w hat it says. Anyone w ho has problems w ith
this guide is a noob.
820.
Del
Posted March 2, 2011 at 2:30 pm | Perm alink
Help
boots from usb, loads ok, then restarts but just starts the load w indow s 7 process
again. if i take out usb it says no operating system.
sorry, as you can probably guess, i am a bit dim at this stuff
821.
WILL
Posted March 2, 2011 at 3:25 pm | Perm alink
GREAT JOB
Posted March 3, 2011 at 4:24 am | Perm alink
GREAT JOB
Posted March 3, 2011 at 4:33 am | Perm alink
SmVueno
Posted March 5, 2011 at 3:36 am | Perm alink
Thanks!
iw e been using this guide soo much now its almost abusive.
825.
Bek
Posted March 5, 2011 at 11:16 pm | Perm alink
I get stuck on step 4; how do i know w hich disk is for my usb? I selected disk 1 anyw ay
and typed in CLEAN. its tells me VIRTUAL DISK SERVICE ERROR: there is no media on the
device. i didnt think anything of it because the usb didnt have anything on it to begin
w ith. so I typed in Creat Partition Primary then tells me No usable free extent could be
found. it may be that there is insufficent free space to creat a partition at the specified
size and offset.
converted by Web2PDFConvert.com
I dont know w hat that means. my usb is 4GB, is that too small? am I doing it w rong?
826.
Zham
Posted March 6, 2011 at 1:55 pm | Perm alink
I compelete all the steps but w hen I use it in my laptop, I get this message BOOTMGR is
missing. I dont know w hat is the problem.
827.
sumit
Posted March 6, 2011 at 10:09 pm | Perm alink
Vibhakar Lal
Posted March 7, 2011 at 1:54 am | Perm alink
Aw some ,
This w ork like Charm,
All w e me People must follow are steps,
Religiously,
I am able to install in 12min
.
829.
Hey Bek
Posted March 7, 2011 at 1:58 am | Perm alink
Hey Bek. Normally the DISK # w ould be the last on the list. Before you start, unplug any
other external device from your system. And note if you have more than one internal
hard drive. So if you have 2 internal drives and the one usb drive (the one you w ant to
load the boot on), then the list w ould be:
Disk 0 (1st internal)
Disk 1 (2nd intermal)
Disk 2 (external)
Also the Size column, in your case should be a little under 4 gig. W ill show something like
3242 MB.
Hope that helps
830.
11225e
Posted March 8, 2011 at 8:43 am | Perm alink
Hi. Ive read all the posts hoping to solve my issue but no luck. I hope someone has
the answ er
I am trying to make my 1TB eGo USB 2.0 Desktop Hard Drive bootable. I am running W in
7. The bios hardw are supports booting from a USB drive, and I am able to select the USB
drive from the boot menu. But w hen I choose the USB drive, I get:
A disk read error occurred
Press Ctrl+Alt+Del to restart
I am able to read/w rite from the USB drive normally via W in 7 w ith no problems. The USB
drive is formatted NTFS and could this matter my computer is 64 bit and the USB drive
is formatted w ith w hatever you get w hen you select NTFS w ould that be 64 bit in my
case?
Lastly, w hen I try the W indow s 7 USB Tool, I cant even get past selecting an ISO file it
says mine are invalid.
Is there any help for me??
831.
shaheryar
converted by Web2PDFConvert.com
please help me i am having an error (could not map drive the partition to the associated
volume device object:access is denied) please help me
thank you
832.
chetan
Posted March 10, 2011 at 1:39 pm | Perm alink
Hello, I am trying to install w in7 ,I am reaching till getting install option after boot but I
am getting error like required cd/dvd drive device driver is missing.if you have a driver
floppy disk,cd,dvd or usb flash drive,please insert it now plz help me urgent
833.
karthik0000
Posted March 11, 2011 at 7:50 am | Perm alink
Installing operating system through usb flash drive is really a difficult task how ever
installing vista and w indow s 7 are now made easy using the usb flash drive. The above
listed post explains a step w ise approach to installation using sub flash drive. impressive
post , keep updating more important stuff.
834.
TianYi
Posted March 13, 2011 at 11:17 am | Perm alink
Juan
Posted March 13, 2011 at 2:38 pm | Perm alink
Thanks much, had a problem w ith access denied but read thread and I w as not running
CMD as administrator. Went back and ran CMD as admin and w orked great!, needed w in
7 for a NETBOOK format and reload.
thank you for this guide!.
836.
Myat Min
Posted March 14, 2011 at 3:05 pm | Perm alink
Nigel
Posted March 15, 2011 at 2:46 am | Perm alink
If I make the key on an ASUS w indow s 7 w ill it w ork to repair a totally f-ed up medion
vista w ho alw ays gets a blue screen w hile booting in evey single mode?
838.
Major
Posted March 15, 2011 at 7:30 am | Perm alink
I have made an usb also w ith this methos, i have alw ays the same problem. at the first it
does not ask me to press any key to boot w hich it begins automatically. So it never
finishes the installation since w hen the system reboots after the first phase, the
installation starts again loading the files. any suggest please?
From a DVD there is no problem since it asks me to press any key to boot
839.
saddavi
Posted March 15, 2011 at 1:38 pm | Perm alink
Cheers
Posted March 15, 2011 at 5:35 pm | Perm alink
Had problem at bootsect but this [http://technet.microsoft.com/enus/magazine/dd535816.aspx] simple one w orked at w indow s vista 32bit to install a
w indow s 7 64bit.
841.
Cheers
Posted March 15, 2011 at 5:39 pm | Perm alink
forgot to add: use the ntfs instead of fat32, its better for larger (>4GB) drives
842.
michal
Posted March 16, 2011 at 12:24 am | Perm alink
hi all got a problem. try to instal w indow s 7 from pendrive and after i make a choice w ith
language time etc, on next screen show ing me message i havent got some drivers and i
need put a cd w ith w indow s. w hat i cant do becouse i havent got a dvd rom.
843.
karthik
Posted March 16, 2011 at 1:04 pm | Perm alink
w hen i turn on my system its comming as BOOT ERROR, Press Ctrl+Alt+Del to restart..
my os has geen corrupted nd i dont have the DVD drive also.. can u tel me hw to install
W indow s7 using Pen Drive.
844.
style
Posted March 17, 2011 at 7:05 pm | Perm alink
w ell thanks alot brother for this usiful lesson but i have a small problem , my w indow s
w hich i w ant to dow nload is not original , and its crack is built in it , w hen the setup
reboots i had to change the boot priority from flash USB to HDD in order to complete
converted by Web2PDFConvert.com
instalation BUT w hen i do so the w indow s w ill not be cracked !!! w hat shall I Do ;
845.
Amadeu
Posted March 17, 2011 at 8:48 pm | Perm alink
Im trying this on a portable w ithout any hard disk nor cd/dvd reader. It has just 2 USB
entries. It w orks fine w ith Linux (no surprise!)
Thanks for your w ork !
Amadeu
846.
Kairoko
Posted March 19, 2011 at 9:47 pm | Perm alink
Is there a w ay to get the USB to w ork for other purposes again afterw ard? Please reply
to me asap, and preferably by email, if you can see it.
Regards,
Kairoko
847.
toto
Posted March 22, 2011 at 1:46 am | Perm alink
Jake
Posted March 22, 2011 at 4:49 am | Perm alink
Kairoko,
Hi all you have to do is plug it into any machine and right click on the drive and format
to either FAT32 or NTFS
and then VOILA!
849.
Admiralis
Posted March 22, 2011 at 7:19 pm | Perm alink
aw esome as i`m a tech noob i`m returning over and over to this site its aw esome
helped me several hundreds of times (a false exaggeration) keep making posts like this
tnx a million (ROFL i like to roll on floor allot)
850.
MetalMadness
Posted March 23, 2011 at 4:36 am | Perm alink
i cant get past step 3 lol, im on w in 7 x64 and ive typed in diskpart and its show s the
first part of the msg but not the diskpart> bit :S it w ont let me type either.
i have left it alone for a w hile just incase it w as having a moment of fail and being slow ,
ive even tried it from the start again (making sure i follow perfectly step by step and i still
get the same thing.
im not a complete noob on computers but this is new to me
851.
lovejeet singh
Posted March 23, 2011 at 9:33 am | Perm alink
hi..
w hen a am execute bootsect.exe /nt60 f: (f is my usb drive letter) command the
message I get is:
Could not map drive partitions to the associated volume device objects: Access is
denied.
please give me the solution ive been follow ur steps and instruction 4 times
852.
jadajada
Posted March 23, 2011 at 10:17 am | Perm alink
does this process w ork on older systems w hich do offer booting from USB devices for
instance a dell dimension 2400 please post w hen you get a moment.
853.
jadajada
Posted March 23, 2011 at 10:43 am | Perm alink
W OW big ups to you sir, i can confirm it does w ork on older systems. Provided the
system has the option to boot from a USB device,it w ill w ork. everything w ent great!
thanks you very much.
p.s this w as my first attempt at booting from a USB device and you made it very clear
and straight forw ard.
i cant thank you enough. keep up the great w ork. K + + +
854.
DaGoof23
Posted March 23, 2011 at 9:20 pm | Perm alink
Not sue if this has been mentioned before, if so, please delete my post.
First of many thanks for this great guide!
Created a Bootable pen drive w ith it and pluged it in only to get the message: BootMGR
file is missig
converted by Web2PDFConvert.com
Solution in my case:
Removable device Boot in Bios w as enabled, but the Bios maped the Pen as a harddrive,
so even if i manually chose: Boot from removable device BIOS didnt find any and
jumped to boot from Harddisk w here it found no BootMGR.
W hen inspecting bootsequence in BIOS i could expand the entry Harddrive the
expanded entry show ed the built in harddrive as first device and the pen as second.
Well i sw itched the pen to first device and it w orked.
Sry for this long explanation, i hope it can help.
855.
rey
Posted March 24, 2011 at 2:53 pm | Perm alink
ON STEP #8:
MY QUESTION IS W HAT IS FIRST THING TO DO BEFORE I COPY W IN7 INSTALLER INTO THE
USB..BTW I GET THE INSTALLER IN TORRENT W ITH THE .UIF EXTENSION.
856.
jrr
Posted March 24, 2011 at 9:35 pm | Perm alink
hey thanks so much this w as so hopeful keep it up man. hey and once you figure a w ay
to install xp please post the link thanks.
857.
Achal
Posted March 25, 2011 at 8:04 pm | Perm alink
My friends computer is not w orking. The system starts, says w indow s is starting and
then again goes to first stage of statrup and this cycle goes on. I have pen drive w hich
has W indow s 7 Ultimate installation files in it. How to do it now .
858.
SUVIGYA
Posted March 26, 2011 at 3:09 pm | Perm alink
HELLO
I DON,T THIS ON XP
NO DISK 1 APPEAR IN CMD COMMAND
LIST DISK
I HAVE NO DVD W RITER SO HOW I COPY THE FILE FROM DVD TO PENDRIVE
PLS SEND ME FOLLOW ING STEP THROUGH EMAIL FOR XP
859.
chaky
Posted March 26, 2011 at 5:53 pm | Perm alink
Mickey
Posted March 27, 2011 at 5:52 am | Perm alink
GREAT GUIDE!
861.
john
Posted March 27, 2011 at 11:14 am | Perm alink
Sabya
Posted March 27, 2011 at 1:41 pm | Perm alink
I have the contents in my PC to copy but dont have the CD w ith me how to proceed
help. I am at the stage of DISKPART>EXIT now it show s C:\w indow s\system32>
how to proceed.
Regards
863.
minhalarabi
Posted March 28, 2011 at 3:44 am | Perm alink
converted by Web2PDFConvert.com
EXIT
u w ill be back to c:
then again typeyour drive name D: (DVD Drive name)
AND SAME AS GIVEN THERE
D: CD BOOT
D:BOOT>BOOTSECT.EXE /NT60 H:
Relly u did it Finaly
Thx..tw eakw indow s.add like be your frend i am your fanxd:P
864.
minhalarabi
Posted March 28, 2011 at 3:49 am | Perm alink
Mazahyr
Posted March 28, 2011 at 4:56 am | Perm alink
Hi im able to do all the steps right but i cant make it sure w hether it is bootable or not.
W hen i attempted all the mentioned step the w indow s icon appeared on the USB
drive. Now w hen i open it by double clicking instead of opening the autorun setup
w indow , it explores the USB. Wat indication w ill help me know w hether it has become
bootable or not. Plz urgent help required.
866.
riz
Posted March 28, 2011 at 1:41 pm | Perm alink
w hat if my w indow s 7 dvd is not a bootable 1??w ill it w ork ??like w ill it copy all the files
on the usb and w ork as a bootable 1?
867.
aaron
Posted March 29, 2011 at 10:35 pm | Perm alink
guys, you gotta remember to move the files on the root of the USB drive. IF THEY are in a
CD_ROM folder, Bootmngr w ill not be found by the BIOS
good luck and thanks for the aw esomeness
868.
Smo
Posted March 30, 2011 at 8:13 pm | Perm alink
Thanks so much for the effort here, really comprehensive guide, saved me alot of hair
pulling. A very important w ebpage! Keep it up!
869.
Jashan
Posted March 30, 2011 at 8:45 pm | Perm alink
admin
Posted March 31, 2011 at 10:34 pm | Perm alink
@Mazahyr
Try it on VMWare or VirtualBox.
871.
admin
Posted March 31, 2011 at 10:37 pm | Perm alink
@Jogh
If you dont have a w orking optical drive and have an ISO file of W indow s 7, simply
mount it using Virtual Clone Drive.
872.
ali_J
Posted April 2, 2011 at 9:21 am | Perm alink
hey i am also getting the error a disk read error occured Press Ctrl+Alt+Del to restart
after trying to boot from the usb
i see there are several people w ho has this issue but is not resolved. admin if there is no
solution, can u please provid an expaination
873.
Chaz
Posted April 2, 2011 at 10:43 pm | Perm alink
converted by Web2PDFConvert.com
874.
feyaz
Posted April 4, 2011 at 4:22 am | Perm alink
hey, I screw ed another hard disk w ith these codes, its obvious that I made a mistake. I
had more than 600gb data in it. Now w hen I double click on it in my computer it says its
not been formatted.
Is there a w ay I can recover my files?
875.
Aaron
Posted April 5, 2011 at 5:26 am | Perm alink
@feyaz no if it said its not formatted then all the data on it is already gone.
On another note, this w orked great thanks.
876.
3rdEye
Posted April 5, 2011 at 10:47 am | Perm alink
tarun Purohit
Posted April 5, 2011 at 11:15 am | Perm alink
someone
Posted April 6, 2011 at 4:38 am | Perm alink
If you w ant a easy w ay (no need using command prompt, also avoid the problem of not
seeing your usb drive w hen using the list disk command) for creating a bootable usb
drive for installing w indow s 7, dow nload and use the tool from here. You can find the
instructions here
http://w w w .intow indow s.com/how -to-create-bootable-w indow s-7-usb-to-installw indow s-7-from-usb-flash-drive-using-w indow s-7-dvdusb-tool/
879.
Willi
Posted April 6, 2011 at 9:27 pm | Perm alink
Hi, I follow ed the guideline upto step 7. I used a 4GB usb stick but the W indow s 7 DVD
contents are 4,78 GB large. How is it supposed to fit into the stick. Thanks
880.
hamoosh
Posted April 7, 2011 at 3:36 am | Perm alink
very good
in addition for ppl w ho dow nloaded w indow s on their pc , in step 6
u first extract iso file of w indow s if it is
then u type that command but not choosing D: the driver letter u jst w rite first letter of
drive u saved extracted files
then CD full path of location of ur files.
881.
AlKHOlIc
Posted April 8, 2011 at 10:35 pm | Perm alink
freaking aw some w orked great thanks bunch and i tried like 5 differnt program that
w here just headache you saved the day THANK YOU
882.
Anil
Posted April 8, 2011 at 10:46 pm | Perm alink
thank u so much, i tried many other trick but i fail all the time. this guide and screen
shots make it easy and i succeed. once again thanks a lot. it makes me ur fan.
883.
Shivam
Posted April 9, 2011 at 8:09 pm | Perm alink
I dont have a w indow s 7 dvd but i have w indow s setup in my computer can i make
bootable usb from this. If yes plz tell me how
884.
Tejinder Singh
Posted April 10, 2011 at 12:38 am | Perm alink
sir i dont have dvd drive. I have copied the installation files of w indow s 7 on my hard
disk .I am not able to get how to use D; CD BOOT command
885.
Siby
Posted April 11, 2011 at 4:24 pm | Perm alink
Rooli
Posted April 11, 2011 at 7:00 pm | Perm alink
Al
Posted April 12, 2011 at 2:45 pm | Perm alink
This is so so cool. Ive done it and its w orking 100%. Thank you very much for this guide.
888.
potter3
Posted April 12, 2011 at 7:31 pm | Perm alink
converted by Web2PDFConvert.com
sam
Posted April 13, 2011 at 12:04 am | Perm alink
hey guys w y w asing time on w indow s try linux mint one dvd w ill install all of ur needs. vlc
open office image editor all drivers and u can boot live using a pen drive no need to
install it!!!
and best part no viruses and a very stable system w ith superfast booting time give it a
try
890.
SuperTareFrate
Posted April 13, 2011 at 9:06 pm | Perm alink
Works 100%, tested and running w indow s 7 installed from USB Stick! Nice w ork!
891.
SUDHEESH
Posted April 14, 2011 at 5:20 pm | Perm alink
Darko
Posted April 14, 2011 at 6:18 pm | Perm alink
Gi joe
Posted April 14, 2011 at 10:17 pm | Perm alink
Diskpart is different on XP to Vista and W indow s 7. So the above guide probably w ont
w ork in XP because some features of Diskpart that w ork in Vista and W indow s 7 dont
w ork in XP. We found this out at w ork over a year ago w hen attempting to do the same
thing.
894.
Julian
Posted April 15, 2011 at 2:25 am | Perm alink
sanjay
Posted April 15, 2011 at 1:06 pm | Perm alink
samraat
Posted April 15, 2011 at 2:11 pm | Perm alink
Karaciite
Posted April 15, 2011 at 4:13 pm | Perm alink
hey,
can the USB be used again as it w as before copying w indow s 7 setup in it? or its turned
into permenently a W indow s 7 setup drive ?
898.
admin
Posted April 15, 2011 at 5:32 pm | Perm alink
@Karaciite
You w ill able to use it again for other purpose.
899.
SupaTom
Posted April 15, 2011 at 5:35 pm | Perm alink
For some of you w ho cannot get the USB to recognize or the USB to boot, chances are
your USB flash drive itself doesnt like to be a boot device.
My 4GB Cruzer Micro refuses to be a boot device, w hile my 4GB OCZ ATV has no problem.
Keep this in mind.
900.
Shang
Posted April 15, 2011 at 6:50 pm | Perm alink
Shang
Posted April 15, 2011 at 8:53 pm | Perm alink
Oh My God, I cant do anything w hen the error display the message in the empty box:
Install W Indow s
No dirves w ere found. Click Load Driver to provide a mass storage dirver for installation
Notice: I did step by step as 9 steps above,all ok. But w hen I install w indow s 7 (set
BIOS priority to USB ok), the error displayed.
I hope you help me.
902.
Karaciite
Posted April 16, 2011 at 2:06 am | Perm alink
ok thnx
converted by Web2PDFConvert.com
903.
ABHINAV
Posted April 18, 2011 at 9:28 pm | Perm alink
Mike Vango
Posted April 19, 2011 at 1:21 am | Perm alink
Works Perfect w ith W indow s 7. Follow ed the guide and w orked like a dream..!
Thanks for a super duper guide.!!
905.
codifus
Posted April 19, 2011 at 7:01 pm | Perm alink
Did this w ith W indow s 2008 R2 .iso Worked flaw lessly. Thanks Tw eakW indow s!!
906.
John W
Posted April 19, 2011 at 10:15 pm | Perm alink
Excellent article. Got it w orking first time. Saved me ball ache! Thanks mate.
907.
Ricardo
Posted April 21, 2011 at 9:12 pm | Perm alink
Great post!!!
By any chance do you have a similar one for W indow s XP?
Thanks
908.
Max
Posted April 21, 2011 at 10:05 pm | Perm alink
Just w anted to say thank you, Ive been using this guide for a w hile and it alw ays
w orks and alw ays helps! Thank you
909.
John C
Posted April 23, 2011 at 2:10 am | Perm alink
For those getting the error of There is insufficient free space to create a partition
I w as getting the same error. I had to CLEAN again and then it w orked. You might also
have to clean all.
Hope that helps.
910.
CK
Posted April 24, 2011 at 2:32 am | Perm alink
Thanks for this guide, it saved me having to replace an external DVD rom, for all those
that got the problem of read error all you need to do is substitute fs=ntfs to fs=fat32,
that fixed my problem.
911.
Bob
Posted April 24, 2011 at 4:49 am | Perm alink
soodabeh
Posted April 24, 2011 at 4:41 pm | Perm alink
Hi,
Thanks for your help and article.
I test it and it w ork.
913.
Jeff
Posted April 24, 2011 at 8:43 pm | Perm alink
Thanks for he helpful tip. I just got a new CPU/MOBO and turns out it doesnt have any
IDE interfaces, and I have no SATA DVD drive! I used to image XP machines from a USB
drive using GHOST and an HP/Thin Client utility I figured there had to be a w ay to do
this in W indow s.
914.
sibin
Posted April 24, 2011 at 9:15 pm | Perm alink
Vig
Posted April 25, 2011 at 2:43 am | Perm alink
This guide is much better than any other Ive come across, esp for how to format the usb
drive. Thanks!
916.
Andy
Posted April 25, 2011 at 3:59 am | Perm alink
converted by Web2PDFConvert.com
Moe Ali
Posted April 25, 2011 at 10:08 pm | Perm alink
Hello,
I just w anted to thank you for this step-by-step guide.
It w as amazing and it w orked PERFECTLY fine.
Thank you again.
918.
ATUL
Posted April 26, 2011 at 2:41 pm | Perm alink
Addelini
Posted April 26, 2011 at 11:59 pm | Perm alink
Hey there, I dont know if this question has been answ ered before but, can i use this on
my external harddrive ? And can i use this w ithout having the installation files? since i
dont have a Installation DVD is the installation files somew here on the current
harddrive?
920.
Prerit
Posted April 28, 2011 at 1:06 am | Perm alink
Adrian
Posted April 28, 2011 at 5:55 am | Perm alink
Aw esome post. thank you very much. w orked fine for installing SBS 2011.
922.
Jrei
Posted April 28, 2011 at 7:35 pm | Perm alink
Question:
If my optical drive is not w orking (thats w hy I need this tutorial to reinstall/reformat my
PC using Bootable USB) and I have my ISO image (also the extracted file) of W indow s
Vista on my hard disk, how about step 6? am I still using the CD BOOT command on this
matter?
Help, thanks!
923.
Hero
Posted April 30, 2011 at 2:51 am | Perm alink
mine says
couldnot map drive partitions to the associated volume device object:
access is denied
PLEASE HELP!!
924.
phil
Posted April 30, 2011 at 6:55 am | Perm alink
sir w hen i type the command BOOTSECT.EXE/NT60 H: IT SAYS thatcould not map drive
H:to an associated volume device w hat should i do man?
925.
Ari
Posted May 8, 2011 at 2:23 pm | Perm alink
Kar Fai
Posted May 8, 2011 at 9:46 pm | Perm alink
Hey for people having problems you should explore other w ays to do it lol
http://technet.microsoft.com/en-us/magazine/dd535816.aspx try this site or just google
w indow s 7 usb evangelist the first link is the site anyw ay i used to try this method but
odd enough i couldnt get past after certain step and as pointed out by those that fail
even w hen the method w orks during installation problem occur so here you go i w asnt
going to type my comment in at first till i realize its 2011 and more than ever people are
still doing this so here is an alternative cheers
927.
Mike
Posted May 9, 2011 at 6:32 am | Perm alink
Jhayz
Posted May 9, 2011 at 12:01 pm | Perm alink
converted by Web2PDFConvert.com
929.
leo
Posted May 10, 2011 at 12:35 pm | Perm alink
thanx.
100% w orking
great tutorial
illustrated.
930.
leo
Posted May 10, 2011 at 12:37 pm | Perm alink
@phil
type the command after restarting your pc
same problem occured here.
i just restarted my pc and it w orked
931.
joshua
Posted May 10, 2011 at 1:17 pm | Perm alink
Greetings!
can you give me a link w here i can dow nload w in7 ulti 32bit?
thanks
932.
joshua juanata
Posted May 10, 2011 at 2:58 pm | Perm alink
help me w ith step number 5 can i use Pow er Iso then i w ill mount the w in7 files. because
i have no dvd drive =.=
933.
skalig
Posted May 10, 2011 at 4:20 pm | Perm alink
ateh
Posted May 11, 2011 at 9:26 am | Perm alink
admin
Posted May 11, 2011 at 11:04 am | Perm alink
@ joshua
Check this post: http://w w w .intow indow s.com/dow nload-w indow s-7-enterprise-90-daytrial-now /
936.
pravin
Posted May 12, 2011 at 11:43 am | Perm alink
Hi Thanx allot handsome. Its 100 percent w orking.I w as under presser w ith a Laptop
you helped me. W ish u all the best. Tc
937.
valy
Posted May 12, 2011 at 9:11 pm | Perm alink
Hello. I have a 8gb kingston pen drive. I have did all the steps. At the end i have copied
the files from the dvd w in 7 ultimate to the stick. On boot it says : pen drive w ithout
operating system. Please help.\
938.
valy
Posted May 12, 2011 at 9:21 pm | Perm alink
I did a mistake. Now i now w hat it w as. My stick is bootable. Thanks for this tutorial.
939.
vice245
Posted May 13, 2011 at 12:51 am | Perm alink
Maverick
Posted May 14, 2011 at 6:56 pm | Perm alink
how to revert the flash drive back to normal file transfer usage?
941.
George
Posted May 15, 2011 at 10:11 pm | Perm alink
Bharat
Posted May 15, 2011 at 10:12 pm | Perm alink
Ronel
Posted May 16, 2011 at 2:09 pm | Perm alink
Hi, i have one concern because you see i have already a soft copy of the w indow s 7
installation files. There is no DVD file on it. So, my concern is that w hat am i gonna do in
step 6 and step 7? w hat should i skip? or is there something else i should do? Please
Help. email me PLEASE..
converted by Web2PDFConvert.com
944.
kamran
Posted May 16, 2011 at 5:26 pm | Perm alink
hi tnx
i did evry rules but i have a problem
in boot select in bios i have 4 USB choos
usb cd rom
usb zip
usb hdd
usb fdd\
w hich one i shoul choos ?
w hen i choos USB HDD an error acored that press crt+del+alt to restart and cant boot
w hy ?
945.
Mads M. Eriksen
Posted May 17, 2011 at 11:37 am | Perm alink
Darek
Posted May 17, 2011 at 9:07 pm | Perm alink
Themba
Posted May 18, 2011 at 9:40 pm | Perm alink
hamza
Posted May 18, 2011 at 11:41 pm | Perm alink
hi,
i am the w hole process, it w orks fine but in the end it states
could not map drive partition to the associated volume device object: access is denied
can somebody please help me w ith this!
949.
Nicholas Corona
Posted May 19, 2011 at 2:23 am | Perm alink
Lee
Posted May 19, 2011 at 4:51 am | Perm alink
I w as able to do all the steps on a 4 gb flash drive, but i ran out of space so I purchased
an 8 gb. W hen I get to step 4 creating the partition I get the follow ing error: there is
insufficient free space to create a partition at the specified size and off set. Specify
different size and offset values or dont specify either to create the maximum size
partition.
I have tried several times w ith same error. As I noted above the first time on the smaller
flash drive it w orked fine. Any idea?
951.
sia
Posted May 19, 2011 at 8:25 am | Perm alink
w hy it said no device driver w ere found??i have follow ed all the steps to transfer the file
from dvd to usb device.
Plz help..thx
952.
JHONNY"X"
Posted May 20, 2011 at 11:34 pm | Perm alink
hey man i w as just w ondering if i can copy the file of both w indow s vista and w indow s 7
on the same pen drive.
Thanks for the steps..
953.
R.B.
Posted May 21, 2011 at 2:22 am | Perm alink
nishiki
Posted May 24, 2011 at 2:53 am | Perm alink
converted by Web2PDFConvert.com
This has got to be the best how -to for usb boot Ive come across. Thank you very much
for it.
955.
Anjan Bhowmik
Posted May 25, 2011 at 3:51 am | Perm alink
Kevin Harms
Posted May 25, 2011 at 9:05 pm | Perm alink
Great docs, easy to understand. W hat I found is I had to do the bootsect /NT60 h: after
the file copy, then it seemed to w ork.
957.
Charlie
Posted May 25, 2011 at 11:11 pm | Perm alink
Tony
Posted May 26, 2011 at 12:25 am | Perm alink
Didnt w ork. W hen I typed in LIST DISK it first show ed only my hard drive Then I put
my flash Drive in another port (K) and w hen I typed in LIST DISK it gave me a list of dos
commands. Do you know w hy?
Thanks
959.
Tony
Posted May 26, 2011 at 2:36 am | Perm alink
Ross
Posted May 26, 2011 at 4:17 pm | Perm alink
Has any one done a w rite up for doing this for XP?
And if so w hat is the w eb address?
OR w hat are the steps for doing this for a XP installation?
961.
Amiel
Posted May 30, 2011 at 5:53 am | Perm alink
Works great for w indow s 7! At first I w as afraid of w hatll happen to my USB drive. After
typing CLEAN, it displayed an error report and my USB device light kept blinking. I exited
disk part and restarted the procedure. This time it w orked perfect. I w as able to reformat
my HP laptop flaw lessly. Thanks!
962.
Bilal
Posted May 31, 2011 at 8:34 pm | Perm alink
paul
Posted May 31, 2011 at 9:38 pm | Perm alink
Mostafa
Posted May 31, 2011 at 9:42 pm | Perm alink
you said Format process may take few seconds ! but it take few hours for me ! w hy ?
thanks
965.
Jatin Kumar
Posted June 1, 2011 at 3:06 am | Perm alink
converted by Web2PDFConvert.com
abhijit
Posted June 1, 2011 at 12:48 pm | Perm alink
great information.
thank u so much for sharing
968.
rajat
Posted June 1, 2011 at 2:13 pm | Perm alink
krisna
Posted June 2, 2011 at 2:55 pm | Perm alink
ur guide is almost done. but at the end part i did format the c drive and click NEXT
button.so its display a error massage that is setup w as unable to create a new system
partition Or locate an existing system partition.see the setup log files for more
information.
so plz rly to me.thanks to u
970.
boat parts
Posted June 2, 2011 at 7:35 pm | Perm alink
hi,Thanks to you for sharing this.Actually my DVD drive w as not w orking and i w as not
getting any w ay to install my new copy of w indow s so i copy all my data in my USB drive
attached w ith other desktop machine and by using this process i installed w indow s on
my laptop.It is really an amazing w ay for installation.
971.
Mike
Posted June 3, 2011 at 9:01 am | Perm alink
Worked like a charm! I w as having netw ork connection difficulties on my HP mini 210. It
w ould connect w ireless for about 15 minutes then drop and not come back. HP
determined that it might be a w indow s issue and w anted me to reinstall W indow s 7
Starter w ith their USB drive. Rather than w ait over 5 days for the drive, I follow ed these
steps (very clear btw ) and it booted right into the reinstall and it kicked off just fine. Now
I can put a fresh install of 7 Ultimate on and see if that fixes it. Thanks!
972.
norbeey
Posted June 5, 2011 at 8:46 pm | Perm alink
All the steps w ent fine and I have set the removables to the 1st place at the boot
priority order but still nothing happens. W hy?
973.
eru88
Posted June 6, 2011 at 2:08 am | Perm alink
I did everything but w hen i try to install the operating system it says
W indow s cannot install required files. Make sure all files required for installation are
available, and restart the installation. Error code: 0x8007045D
I try deleting and saving the files from the dvd again to the usb but the same thing
happen. I am mounting the iso and saving those files, does it not w ork like that?
974.
Emirates Skeptron
Posted June 6, 2011 at 2:43 am | Perm alink
975.
Aakash
Posted June 7, 2011 at 5:37 am | Perm alink
Hey,
I tried doing this on my external HDD and it didnt w ork. So I used a USB Flash Drive and
it w orked great. But now w hen I try to use my External HDD, it w ont w ork at all. Any
help?
Thanks.
976.
Fanctron
Posted June 7, 2011 at 8:21 am | Perm alink
converted by Web2PDFConvert.com
Cheers
977.
espen
Posted June 8, 2011 at 4:10 pm | Perm alink
fantastic!
978.
sam
Posted June 8, 2011 at 11:58 pm | Perm alink
sandip karmakar
Posted June 9, 2011 at 9:08 am | Perm alink
vinay
Posted June 9, 2011 at 3:41 pm | Perm alink
ihave a doubt in the 8th step,w here u say to copy the w indow s files to usb.there w hats
copying,does it mean to copy image file?.
981.
Shaun
Posted June 9, 2011 at 4:43 pm | Perm alink
Thankyou, after running into the problem of the w indow s 7 installation hanging w hen it
expands files w hen i used the dvd w as doing my head in, then using this method and
booting the setup via usb, made it w ork like a charm
982.
Arjen
Posted June 9, 2011 at 7:28 pm | Perm alink
Jude
Posted June 10, 2011 at 12:51 pm | Perm alink
I had follow all your instruction and I got it all smooth. But w hen I tried to use my USB to
boot my Acer 4530, I got the message BOOT MGR MISSING. W hats w rong?
984.
Rajmohan
Posted June 10, 2011 at 1:18 pm | Perm alink
great !!!
985.
yusri
Posted June 10, 2011 at 6:43 pm | Perm alink
my problem is,
BOOTSECT.EXE is not recognized as an internal or external command operable program
or batch file.
w hat i need to do?
986.
Patrick
Posted June 10, 2011 at 10:11 pm | Perm alink
W hy not show hidden folders and files in folder options and open the w indow s 7 disc
and copy all the files to a flash drive. w orks for me 100% of the time
987.
Navid
Posted June 12, 2011 at 6:10 pm | Perm alink
Ash
Posted June 13, 2011 at 12:33 pm | Perm alink
MouZ
Posted June 13, 2011 at 1:34 pm | Perm alink
M gonna try this right now . My cd/dvd-rom are not w orking since 2 months. I thought i
w ont be able to format until i get it right.. lets see if it w orks:-)
990.
Victor
Posted June 13, 2011 at 9:08 pm | Perm alink
MouZ
Posted June 13, 2011 at 11:22 pm | Perm alink
converted by Web2PDFConvert.com
1. My disk no. of USB flash drive is disk 2. Do i need to type SELECT PARTITION 1 or 2 in
my case?
2. My CD-ROM and DVD-ROM are not w orking, it dont detect any CD or DVD. Everything
w ent smooth till i typed F: CD BOOT (F is my DVD RW drive). The error comes: The
device is not ready. W hat should i do now ??
992.
GCC1401
Posted June 13, 2011 at 11:23 pm | Perm alink
For those w ho got the message COULD NOT FIND MAP DRIVE PARTITION TO THE
ASSOCIATED VOLUME DEVICE OBJECT:
ACCESS IS DENIED you did not run cmd as administrator that is w hy the access is
denied. So, close de de cmd and open it as describe in step 2:
*Go to Start menu > All programs > Accessories, right click on Command Prompt and
select Run as administrator.
993.
shyam
Posted June 14, 2011 at 5:40 pm | Perm alink
I know very w ell that one w indow s 7/xp/vista in one bootable pen drive but i dont know
that how to creat Bootable flash/pen drive of W indow s 7, Vista, or XP in one pen/flash
drive please help me
994.
Gus
Posted June 14, 2011 at 5:41 pm | Perm alink
dzul
Posted June 14, 2011 at 6:13 pm | Perm alink
U save my daythank u
996.
Troy
Posted June 14, 2011 at 11:36 pm | Perm alink
Follow ed to the letter, multiple times. Doesnt w ork for me. Says bootmngr is missing,
and yes USB is set as primary boot drive. Help?
997.
pherenika
Posted June 15, 2011 at 12:50 am | Perm alink
On w indow s 7 removable drives w ill not appear in the list of disks. If your usb is not
show ing up in the list of disks, instead of LIST DISK and SELECT DISK 1, type LIST
VOLUME and SELECT VOLUME 1.
998.
pherenika
Posted June 15, 2011 at 12:52 am | Perm alink
Tony
Posted June 15, 2011 at 3:47 am | Perm alink
Benjamin
Posted June 16, 2011 at 11:26 pm | Perm alink
Just a notice. I dow nloaded a fresh copy of Vista, and i used daemon tools to mount the
iso file. And everything w orked 100%.. GL, and great guide, best out there, Would be
nice w ith a guide for XP too
1001.
kittu
Posted June 18, 2011 at 10:14 am | Perm alink
hi sir,its good but end of part its show s error msg that s set up w as unable to create an
system partition or locate an exits system partition.see the setup log files .
plz how could u slove this. and rly to me
1002.
DK
Posted June 18, 2011 at 10:40 am | Perm alink
DK
Posted June 18, 2011 at 10:44 am | Perm alink
Steve Ollis
Posted June 20, 2011 at 3:05 am | Perm alink
Thanks for this. The DVD drive in my kids PC died just before they managed to destroy
the XP install that w as on there. I w as going to have to rat a DVD from another machine
until I found this article.
converted by Web2PDFConvert.com
1005.
iqbal
Posted June 20, 2011 at 4:22 am | Perm alink
Thanks a lot !! it w orked just fine on the second attemptVery useful..keep up the good
w ork
1006.
Curbup
Posted June 20, 2011 at 6:10 am | Perm alink
hi there
THANK YOU SO MUCH!!!!!!!!!
u made my day
thanks bro..
1007.
Muralidhar
Posted June 20, 2011 at 6:14 pm | Perm alink
Great dude
Thanks..
1008.
Mutherfarqwa
Posted June 23, 2011 at 3:39 pm | Perm alink
Ali
Posted June 25, 2011 at 2:35 am | Perm alink
Thats great
1010.
chad
Posted June 25, 2011 at 9:22 pm | Perm alink
It w orked. Thanks for the article. 5 stars on the clarity, compare your solution to others,
refer to a simpler soluiton for less technical users, and make it #1 rank on search engine.
1011.
martin
Posted June 26, 2011 at 10:09 pm | Perm alink
i got same problem like few ppl here w hich someone described like this
Here is the message after typing BOOTSECT.EXE /NT60 H:
This version of F:boot\bootsect.exe is not compatible w ith the version of W indow s
youre running. Check your computers system information to see w hether you need a
X86 (32-Bit) or X64(64-Bit) version of the program, and then contact the softw are
publisher.
I SOLVED IT
just unomounted the iso from virtual drive and did all the steps again..
BUT I found out that i mounted w rong file to virtual drive!
this is w hy ppl got this problem
just mount the instalation of w 7 in the drive. do this all steps and it w ill w ork for sure!
good luck
1012.
Claire
Posted June 27, 2011 at 7:48 pm | Perm alink
jim
Posted June 28, 2011 at 3:49 am | Perm alink
rishi
Posted June 30, 2011 at 12:22 am | Perm alink
converted by Web2PDFConvert.com
1015.
tina
Posted June 30, 2011 at 3:32 am | Perm alink
tina
Posted June 30, 2011 at 4:32 am | Perm alink
i tried ur command prompt n its telling me cannot map drive partition, access is denied
1017.
John V
Posted June 30, 2011 at 8:08 pm | Perm alink
For anyone having problems w ith the initial setup starting again from scratch w hen the
computer restarts, it isnt necessary to remove the USB drive at any point.
Simply monitor the installation process closely and w hen the computer restarts for the
first time, re-enter BIOS immediately and change the boot device priority so that the
(non-USB) hard drive is the first boot device. Save settings and exit BIOS.
This only needs to be done once and the rest of the installation w ill complete
successfully, regardless of the number of restarts.
1018.
Ryan
Posted July 2, 2011 at 3:12 pm | Perm alink
Devang Vyas
Posted July 2, 2011 at 5:48 pm | Perm alink
Yep. Worked fine for w indow s 7. Good technique w ithout using any kinda softw are.
Thanx for d info.
1020.
fc3232
Posted July 3, 2011 at 12:37 am | Perm alink
Confirm that this w orks on W indow s XP computer being used to dow nload the torrent
First I got an error so I used an 8GB FlASHDRIVE drive and then it w orked
Cool!
1021.
vivek.J
Posted July 3, 2011 at 1:59 pm | Perm alink
im having an error that bootmgr file is missing w hat can i do for tat
1022.
Cheap Vibrators
Posted July 4, 2011 at 7:03 pm | Perm alink
A really usefull post Thank you very much I w ish you w ill not mind me w ritting about
this post on my w ebsite I w ill also link back to this post Thank you
1023.
nong
Posted July 6, 2011 at 9:59 pm | Perm alink
Korea Song
Posted July 7, 2011 at 3:40 pm | Perm alink
hringriin
Posted July 8, 2011 at 6:38 pm | Perm alink
Hi
Well, it actually w orked perfectly according to my W indow s installation but in damaged
my usb device in some kind.
I usually use that one for having live Linux-Images handy, created by UNIVERSAL-USBINSTALLER from pendrivelinux.com
The thing now is, that it is not possible for me to get that w orking again. I think this is
caused by the action of BOOTSECT.EXE Is there any possibility to undo the changes
bootsect.exe has made? Id be very glad, if you can help me. I w ill also w rite a more
detailed description if needed.
Regards
hringriin
1026.
layne
Posted July 9, 2011 at 11:42 pm | Perm alink
Thank you so much! stroke of aw esomeness! I have used this guide now 15 times! and
have it permantly saved on my hard drive! You are amazing and your that kind of people
that make the internet not complete trast
1027.
brian
Posted July 10, 2011 at 4:55 am | Perm alink
converted by Web2PDFConvert.com
1028.
OPACITY
Posted July 10, 2011 at 9:45 am | Perm alink
Sunny
Posted July 11, 2011 at 10:16 am | Perm alink
leroy cozier
Posted July 11, 2011 at 11:45 am | Perm alink
steady
Posted July 11, 2011 at 6:33 pm | Perm alink
i follow ed all the steps mentioned in the guide and all w ent w ell, until w hen i boot into
the usb drive successfully, it says no operating system detected? w hy doesnt it start
the setup files?
1032.
Algis
Posted July 14, 2011 at 6:14 pm | Perm alink
Hi,
I had disk read error w ith Transdcend 8Gb card. I sw itched to aData 8Gb card and
everything w orked fine.
Regards,
Algis
1033.
jayvcc
Posted July 14, 2011 at 9:42 pm | Perm alink
thanks tw eak it w orks smoothly on w indow s 7 this really help a lot. very detailed on
explanations and job w ell done. =)
1034.
jeff
Posted July 15, 2011 at 10:41 am | Perm alink
hi there!
this is really great, i just have 1 question though
w hen you Copy your W indow s 7/Vista DVD contents to the USB flash drive, do you need
to create a folder first or just copy all the files to the USB.
also does it matter if the w indow s 7 is in .iso format? or you need to extract all files first
and then copy to USB? thank you so much!
1035.
LEKA
Posted July 16, 2011 at 3:28 am | Perm alink
Tom
Posted July 18, 2011 at 3:59 am | Perm alink
Hey
Firstly to the author of this article, this w as terrific. A fantastic guide w ith very clear
instructions. Thanks very much for this.
Secondly to Jeff; you dont need to create a folder. After follow ing the instructions set out
here, make sure that there is nothing on the USB drive and then copy the contents of
the w indow s disk (in their entirety) onto the drive. Make sure that the BIOS loads from
the drive first, or press F12 during boot, and youre set.
Tom
1037.
Wolfos
Posted July 20, 2011 at 2:57 am | Perm alink
Cant get it to w ork, I can boot Linux distributions fine w ith this BIOS settings and I
follow ed all steps.
1038.
eDadou
Posted July 20, 2011 at 7:59 pm | Perm alink
Thank you so much, im copying the files right now , you are saving me a lot of frustration
if this w orks !
1039.
mayank
Posted July 21, 2011 at 3:11 am | Perm alink
converted by Web2PDFConvert.com
failmatic
Posted July 21, 2011 at 5:01 am | Perm alink
This guide is terrific. Ive been using this for years. The directions are clear and concise. If
you cant follow it, perhaps, you shouldnt be installing w indow s via usb and go grab
yourself an external dvd drive.
1041.
KEIM
Posted July 21, 2011 at 7:43 am | Perm alink
Alex
Posted July 21, 2011 at 11:09 pm | Perm alink
does this w ork if the laptop im trying to use the usb w ith is w indow s 7 starter?
1043.
KIRK
Posted July 22, 2011 at 7:27 am | Perm alink
I am stuck at part 6. w hen in CMD entering D:CD BOOT IT TELLS ME D:CD is not a
recognized command so I entered D: to bring me into D: and entered CD BOOT that
brought me to D:\Boot> after entering BOOTSECT.EXE /NT60 G it says that is not
recognized as an internal or external command, operable program or batch file. Can
anyone help me navigate around this problem?
1044.
admin
Posted July 22, 2011 at 10:28 am | Perm alink
@ Alex
Should w ork fine.
1045.
BIGTWEZZY
Posted July 23, 2011 at 6:02 am | Perm alink
AA
Posted July 24, 2011 at 8:48 am | Perm alink
I LOVE YOU, I LOVE YOU, I LOVE YOU!!! I have trying to boot and install W indow s 7 my
stubborn HP mini all day you just save me over $200!!!! Thanks so much. Keep up the
good w ork!!!!
1047.
SysAdmin
Posted July 24, 2011 at 2:55 pm | Perm alink
Metin
Posted July 25, 2011 at 2:11 pm | Perm alink
Thanks so much, I repaired my computer w ith a USB W in 7 64 bit, by using your help
guide. Praying for you
1049.
Steve
Posted July 26, 2011 at 11:52 pm | Perm alink
Muhammad arsalan
Posted July 27, 2011 at 5:09 pm | Perm alink
Striky
Posted July 28, 2011 at 1:08 am | Perm alink
Sohaib Ikram
Posted July 28, 2011 at 10:12 pm | Perm alink
converted by Web2PDFConvert.com
Nik
Posted July 28, 2011 at 11:16 pm | Perm alink
Can I install w indow s 7 64bit version on a w indow s 7 32 bit version? if yes then how
can I do this?
thnx =)
1054.
vino
Posted July 29, 2011 at 5:29 pm | Perm alink
SAHU
Posted July 30, 2011 at 9:12 pm | Perm alink
lui
Posted July 31, 2011 at 3:51 pm | Perm alink
hey dude, nice guide.. now i can use my usb as a primary boot device cause my netbook
doesnt have a cd/dvdrom.
1057.
beingthere
Posted July 31, 2011 at 4:03 pm | Perm alink
green house
Posted July 31, 2011 at 11:13 pm | Perm alink
Hi there i have done this and put my USB in and it sarted to take me throgh the set up
process, but the computer is then asking me for the drivers. The drivers are on a
seperate disk and i have no idea w hat drivers it w ould need etc. can you please help
me??
1059.
eggsas
Posted August 1, 2011 at 1:59 am | Perm alink
Striky just change your bios on restart to start hard drive before usb.
It w orked perfectly for me
1060.
Tatsat
Posted August 2, 2011 at 2:00 pm | Perm alink
My system copy installation files and extract files and restarts and after that again and
again system restarts
1061.
Kaustav Dey
Posted August 2, 2011 at 6:37 pm | Perm alink
Vipin dass
Posted August 3, 2011 at 9:34 pm | Perm alink
Thanks dear
1063.
DarthZelda
Posted August 4, 2011 at 12:13 am | Perm alink
So I got through the guide splendidly, the PC booted, but the data w ere somehow
corrupt, so the installation couldnt get to an end. But w hen I inserted the stick and
w anted to rew rite the data, so I could do all that again, W in just couldnt find it. No trace
of inserting anyw here. Anyone any hints? I never heard about making a brick out of USB,
but I might have just done that xD
Cheers,
- DZ
1064.
mohammad
Posted August 4, 2011 at 2:19 am | Perm alink
its very slow format i think that w ill take a days for formating my flash only
Thanks anyw ay for shared information
1065.
phuser
Posted August 4, 2011 at 6:07 pm | Perm alink
Mikey
Posted August 5, 2011 at 10:56 am | Perm alink
As other have said above me (#286 for one), you dont need to type D: CD BOOT and
then CD BOOT the first command D: and then the second command CD BOOT is
fine. Anything after the space in the D: command w as ignored. All you are doing is
navigating the command prompt to D:\BOOT. Thats just how the command line w orks.
1067.
Mikey
converted by Web2PDFConvert.com
p.s. Aside from the above mentioned bug, great article. I didnt know you could do all this
w ith just command line tools
1068.
andrian
Posted August 5, 2011 at 3:03 pm | Perm alink
Brandon
Posted August 7, 2011 at 10:29 am | Perm alink
okay i did every ting step by step and i still get w hen i put it into my laptop boot
manager missing :/ any suggestions?
1070.
unknown
Posted August 8, 2011 at 10:29 pm | Perm alink
hello sir
i did exactly w hat you said.process w as a complete. But w hen i tried it in my system it
show ed A disk error occurred. Press Ctrl+Alt+Del to restart.
Please reply ASAP
1071.
redbeard
Posted August 9, 2011 at 4:27 pm | Perm alink
i have follow ed this tutorial to the letter and the usb boot w orks perfectly but on
installation i get No device drivers w ere found make sure instalation media contains the
corect drivers the media i used installs on any machine i have and w orks perfect any
idea w hy it dont install from usb
thanks in advance
redbeard
1072.
syahrein
Posted August 10, 2011 at 8:40 am | Perm alink
hi man. it used to be as easy as copying the w indow s 7 ultimate cd to my ext hdd and id
be able to use it to boot up. but suddenly it didnt w ork anymore. after finding this site,
im able to install frm my ext hdd.
thanks loads man!
1073.
Sethunath
Posted August 11, 2011 at 10:13 am | Perm alink
Lee
Posted August 11, 2011 at 10:03 pm | Perm alink
If youre having trouble finding your disk in list disk you can just type select volume D:
for example (w here D: is the drive letter of your usb). Also for the format selection you
can also type FORMAT FS=NTFS QUICK so the format is a quick format rather than a 5-10
minute one.
Good Luck!
1075.
say
Posted August 12, 2011 at 10:47 am | Perm alink
hello.
i just have one question:
after formatting the usb, and i dont have w indow s 7 installed in cd but i have a copy of
w indow s 7 activator.
w ill i just send a copy of w indow s 7 on my reformatted usb?
thanks a lot and god bless . ..
1076.
Rudi
Posted August 13, 2011 at 3:02 pm | Perm alink
Please note that W indow s 7 setup doesnt support USB 3.0 device to boot from. This
causes a error during installation that the installer needs drivers. Very simple solution is
to put the USB stick into a USB 2.0 port!
Thanks for this guide, w orks perfect for me!
1077.
Ram
Posted August 14, 2011 at 4:06 pm | Perm alink
I tried using this and it w orked. But w hen the setup is restarting the system, it again
loads w indow s 7 and installs a copy again. The setup isnt getting completed.
1078.
mark
Posted August 14, 2011 at 7:54 pm | Perm alink
Is it ok if my ext hdd has other content?w ill it be erased or be affected if I w ill follow your
converted by Web2PDFConvert.com
process?
1079.
Stephanie
Posted August 14, 2011 at 8:08 pm | Perm alink
I cannot get past step 1. After I type in diskpart all bthe show s up except diskpart> so I
cant enter the rest of the commands.
1080.
CRAFT
Posted August 15, 2011 at 1:51 am | Perm alink
wonwon
Posted August 15, 2011 at 7:43 am | Perm alink
maggie
Posted August 15, 2011 at 11:48 am | Perm alink
w orks like a charm. Id buy you a beer or 3 for all the time you saved me. cheers!
1083.
Ivan
Posted August 15, 2011 at 12:57 pm | Perm alink
hey i got a multi boot usb key w ith w in 7 in it but w hen trying to instal w indow s it says it
cant find drivers for HDD but useing a dvd it finds the drivers. Please help
1084.
Dete
Posted August 15, 2011 at 2:49 pm | Perm alink
Great. Dont have any idea w hat i just did but it w orked. Follow ed every step carefully
and my netbook is right now next to me finishing the install.
Thank you!
1085.
Kakashi
Posted August 15, 2011 at 7:44 pm | Perm alink
Joshjuniorr
Posted August 16, 2011 at 1:00 pm | Perm alink
W hen i go to boot from my usb device it tells me im missing the boot manager and to hit
ctrl alt del to reboot.
i follow ed all the steps and the boot manager step installed correctly. Any idea w hat the
problem could be?
1087.
RZPogi
Posted August 16, 2011 at 10:06 pm | Perm alink
irul
Posted August 17, 2011 at 11:24 am | Perm alink
keeks
Posted August 19, 2011 at 6:05 am | Perm alink
Shashank
Posted August 19, 2011 at 7:31 am | Perm alink
Ali
Posted August 19, 2011 at 12:44 pm | Perm alink
Thank you very much for this guide. This is a great effort.
1092.
NOMAN
Posted August 19, 2011 at 8:08 pm | Perm alink
omar
Posted August 20, 2011 at 11:56 pm | Perm alink
Dean
Posted August 21, 2011 at 3:25 am | Perm alink
Hi. I tried this tw ice now and have seemingly ruined 2 seperate usb thumb drives (Lexar
Echo and Verbatim Tuff n Tiny). An error appeared after attempling to clean the thumb
drives. After that point the drives are no longer functional and I cant complete the rest
of the process. Any ideas?
converted by Web2PDFConvert.com
Viji
Posted August 21, 2011 at 9:26 am | Perm alink
Great Teacher, very w ell explained free-of-cost unlike to most w eb sites w hich takes the
readers a ride and finally request for credit cards. You are a Bonafide Samaritan. Good
Job and keep it go. We are there w ith you Viji, Sri Lanka.
1096.
phantom_IT
Posted August 21, 2011 at 4:09 pm | Perm alink
admin
Posted August 21, 2011 at 10:35 pm | Perm alink
@ phantom-IT
Please try to format the pen drive.
1098.
admin
Posted August 21, 2011 at 10:38 pm | Perm alink
@ Dean
Sorry to hear that your USB thumb drives are not w orking after trying out this guide. Is
W indow s detecting the drive? Can you see the drive in My Computer or Computer?
1099.
Akshay
Posted August 22, 2011 at 10:24 am | Perm alink
Dean
Posted August 23, 2011 at 1:45 am | Perm alink
The thumb drives are no longer recognised. Its no big deal as I just returned one of
them to Best Buy. I w ould really like to know how to re-install w indow s on my netbook
though so Im w ondering is theres any w ork-around to the clean process. Or if theres
some other w ay of formatting the thumb drive for the installation process.
Thanks for the help.
1101.
John Theo
Posted August 23, 2011 at 3:53 am | Perm alink
SPARK
Posted August 23, 2011 at 2:26 pm | Perm alink
Tomislav
Posted August 23, 2011 at 8:27 pm | Perm alink
darnn you shouldve w rote the quict ntfs forman command, not the standard, its taking
forever on this aspire one xD
1104.
coolio
Posted August 25, 2011 at 5:28 am | Perm alink
hey man i havnt got the w indow s 7 cd but got a torrent. do you know exactly w hat files i
need to dow nload/mount. thanks.
1105.
Windows 8
Posted August 25, 2011 at 9:37 am | Perm alink
Technology make me live and w ithout advance and new tech life is not good.. New OS
W ith New features W indow s 8
1106.
Ethien
Posted August 26, 2011 at 7:29 am | Perm alink
THANK YOU!
1108.
Moeed Awais
Posted August 26, 2011 at 10:33 pm | Perm alink
converted by Web2PDFConvert.com
MeMe
Posted August 27, 2011 at 12:31 pm | Perm alink
Just one small problem, it doesnt seem to detect my flash drive Ive tried everything I
know and no matter w hat, it doesnt appear w hen I type List Disk. Any advice?
1110.
CRIZZ
Posted August 28, 2011 at 4:57 am | Perm alink
guys igot my usb no media can you help me out.? i almost done it.. but i might have
skip a step..:(
1111.
Akeles
Posted August 28, 2011 at 4:57 am | Perm alink
u r rock man..
1112.
CRIZZ
Posted August 28, 2011 at 6:47 am | Perm alink
I ALREADY MADE IT W ORK.(USB) JUST THAT IT SAYS THE DEVICE IS NOT READY W HEN I
TYPE D: CD BOOT
1113.
Pramod
Posted August 28, 2011 at 7:09 am | Perm alink
Step 6,7 are very important. Otherw ise the install w ill say Device Driver missing.
1114.
aditi
Posted August 28, 2011 at 3:25 pm | Perm alink
hey i created bootable pen drive n i w ant to install w indow s 7 in boot options they r
show ing usb-hdd,usb-fdd,usb-zip i do not know from w here to boot pl tell
1115.
CRIZZ
Posted August 29, 2011 at 1:21 am | Perm alink
but isnt that dvd drive w ould already be the usb.coz the dvd files(w in7 instalation files
are in usb already)? it only says device not ready TT
1116.
sukuwan
Posted August 29, 2011 at 11:13 pm | Perm alink
Thank u very much , this thing really w orked for me. I appreciate ur w ork!!!!!
1117.
Nate
Posted August 30, 2011 at 4:38 am | Perm alink
how w ould u install from usb if you dont have the w indow s 7 disk but have the w indow s
7 iso file on the usb onto a pc w ith no operating system?
1118.
Ryan
Posted August 30, 2011 at 10:14 am | Perm alink
pradip chaudhari
Posted August 30, 2011 at 3:40 pm | Perm alink
Can you please explain me step no 8. How to copy w indow s 7 content in usb drive.
I mean w heter w e should exit commaond prompt after step no 7?
1120.
Ograje
Posted August 31, 2011 at 5:13 am | Perm alink
Jeanard Guinto
Posted Septem ber 2, 2011 at 7:56 am | Perm alink
thanks dude.,,,
1122.
kunal
Posted Septem ber 3, 2011 at 12:42 pm | Perm alink
thanks man
1123.
Kazrob
Posted Septem ber 3, 2011 at 1:57 pm | Perm alink
Works fine. But the total beginner needs to be told that they need to have bootsect on
their machine and perhaps a link to dow nload it.
1124.
atta
Posted Septem ber 3, 2011 at 11:57 pm | Perm alink
hey man i have w in7 ultimate files in my sony w alkman w ho could i copy those using cd
boot command ive tried this command
g: cd boot
as my sony w alkman is on g drive
but it didnt w ork and show ed this msg
diskpart>
can you help me
converted by Web2PDFConvert.com
1125.
Gars
Posted Septem ber 4, 2011 at 12:00 am | Perm alink
Juan
Posted Septem ber 6, 2011 at 1:21 pm | Perm alink
Youre my hero
1127.
lobz
Posted Septem ber 6, 2011 at 1:37 pm | Perm alink
Thank you for giving me the opportunity to learn and post comments in your site.
1129.
SAscha
Posted Septem ber 6, 2011 at 3:35 pm | Perm alink
Hello and help, I tried this on my eeePC 1005PE but it is not recognizing the USB stick, I
tried 6 of them but nothing. Alw ays: Reeboot and select a propper boot device
W hat can I do? My current w in 7 installation is not w orking anymore. I tried even to
reset the Cmos and removed the battery but nothing. help please, i am going mad
any idea??
cheeers
1130.
Stefan
Posted Septem ber 8, 2011 at 1:07 pm | Perm alink
I had some troubles w ith step 7 as w ell, but found out I needed to run the command as
an Administrator and had nothing to do w ith x64 and/or x86.
1131.
NIRDESH
Posted Septem ber 9, 2011 at 12:25 am | Perm alink
it w orks.
could i convert my usb again to previous version???
1132.
Kevin
Posted Septem ber 9, 2011 at 4:38 am | Perm alink
AW ESOME!!! Thanks.
1133.
PRiYam
Posted Septem ber 12, 2011 at 12:27 am | Perm alink
I had some troubles w ith step 7 as w ell, but found out I needed to run the command as
an Administrator and had nothing to do w ith x64 and/or x86.
1135.
Tomasz
Posted Septem ber 13, 2011 at 12:20 pm | Perm alink
Great!
It w orked perfect and fast.
Very good guide.
Thank You!
1136.
David E
Posted Septem ber 14, 2011 at 7:03 pm | Perm alink
TO MADMAX, franz99, Doug, chrisNova777, and anyone else experiencing the BOOT
0xc000000e w hen trying to boot to the flash drive, I have firgured it out. I tried this w ith
3 different flash drives and every one of them gave me the EXACT same 0xc000000e
message w hen trying to boot. c:\bootsect.exe /nt60 x: /force That did it for all 3 drives. 1
Patriot drive, 1 PNY, and 1 Super Talent, 1 SanDisk, and 1 Kingston and they all w orked
just fine after using the /force command after /nt60 I hope this helps all w ho
encounter this problem.
1137.
Finn Andersen
Posted Septem ber 15, 2011 at 1:50 pm | Perm alink
Great guide
A good idea is to share the USB stick w ith full acces for everyone I got an error w hen
trying to w rite to my 8G usb pen but after sharing , nada problem
// Finni
1138.
Physica
Posted Septem ber 16, 2011 at 12:37 am | Perm alink
converted by Web2PDFConvert.com
1139.
Welsey
Posted Septem ber 16, 2011 at 2:32 am | Perm alink
Great
Good Guide!!!
Thanks
1140.
ali
Posted Septem ber 16, 2011 at 5:17 am | Perm alink
I have boot usb but w hen I plug it to boot the screen put a flashing dash and nothing
happen ?
Help !!
1141.
okazii
Posted Septem ber 16, 2011 at 8:15 am | Perm alink
nice info, but easy to use w in2flash, anyw ay that softw are make errors some times, so
manual metod it;s better
1142.
Robin @ Windows 8
Posted Septem ber 17, 2011 at 1:00 pm | Perm alink
Must w ait till the beta release come out. hope they w ill make it quick..
Robin.
1143.
Ankit
Posted Septem ber 17, 2011 at 2:02 pm | Perm alink
I follow ed all the steps but w hen i booted message appears boot manager missing..Plzz
help!!
1144.
Dusan
Posted Septem ber 18, 2011 at 12:17 am | Perm alink
E:\BOOT\BOOTSECT.EXE /NT60 I:
COULD NOT MAP DRIVE PARTITIONS TO THE ACCOCIETED VOLIUME DEVICE OBJECTS:
ACCESS IS DENIED
Alw ays returns the same message. W HY?
1145.
Tom
Posted Septem ber 18, 2011 at 2:46 am | Perm alink
Sam
Posted Septem ber 18, 2011 at 7:33 pm | Perm alink
Submit Comment
Recent posts
Other Info
About Us
Contact Us
Privacy Policy
converted by Web2PDFConvert.com
converted by Web2PDFConvert.com