Beruflich Dokumente
Kultur Dokumente
Fiberstore (FS.COM) | Push-Pull Tab Patch Cords Make High Density Cabling Easy and Elegant
WHITE PAPER
The on the left of the picture below shows the structure of a LC connector attached to push-pull tab
patch cable. The main body of the LC connector is of the standard size. The push-pull tab looks
simple but it is linked to the latch of the LC connector. When the tab is pulled the latch will be
unlocked easily and the LC connector can be pulled out from the patch panel without difficulty. It
has been proved that LC push-pull tab patch cords can increase cabling density more than 50%.
On the right of the picture above is a MPO connector attached with push-pull tab. The tab can
greatly simplify the use of MPO connectivity when manual access to the release slider and rear
portion of the connector is restricted. In this way, easy insertion and extraction of MPO patch cords
can be achieved.
Fiberstore (FS.COM) | Push-Pull Tab Patch Cords Make High Density Cabling Easy and Elegant
WHITE PAPER
Cabling with push-pull patch cords all you need is one hand and no external tools are required. The
push-pull tab can offer exceptional finger access even in the highest density environments. The
push-pull patch cord can be inserted and removed by pulling or pushing the connector. These cables
are available with OM3, OM4 and single-mode optical cable types.
The benefits of push-pull tab patch cable are not limited to the easy access of the fiber optic
connector. You can get more from this type of patch cords:
Higher flexibility and adjustability: push-pull patch cords are available in various specifications
which can connect different generation of devices from 10Gb/s to 120Gbp/s or more.
Space-saving: with push-pull patch cords, spare space for cabling is reduced which can increase
the density of cabling further more.
Reliability: push-pull patch cords provide safe and easy push and pull of the specific connector
without affecting the other connectors around it.
Economical: high density and ease of installation provide a low initial investment cost. The
above mentioned benefits provide a high return on investment.
Fiberstore (FS.COM) | Push-Pull Tab Patch Cords Make High Density Cabling Easy and Elegant
WHITE PAPER
Application
Patch Cords
Cable Type
Duplex LC Push-pull
Tab Patch Cord
OM3/OM4/Single-mode Duplex LC
12-fiber MPO
Push-pull Tab Trunk
Cable
OM3/OM4/Single-mode
12-fiber MPO to 8 LC
MPO
Push-pull Tab Break OM3/OM4/Single-mode
4 Duplex LC
(male/female)
out Cable
100G to 100G
Cabling
24-fiber MPO
Push-pull Tab Trunk
Cable
OM3/OM4/Single-mode
MPO
MPO
(male/female) (male/female)
MPO
MPO
(male/female) (male/female)
You can contact us at sales@fs.com for more details and customized service.
Fiberstore (FS.COM) | Push-Pull Tab Patch Cords Make High Density Cabling Easy and Elegant
WHITE PAPER
Contact Us
Manufacturing R & D (China)
Follow us
LinkedIn
Twitter
Facebook
G+
Pinterest
Youtube
Blog
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or
implied, concerning any equipment, equipment features, or service offered or to be offered by Fiberstore.
Fiberstore reserves the right to make changes to this document at any time, without notice, and assumes no
responsibility for its use. This information document describes features that may not be currently available.
Contact a Fiberstore sales team for information on feature and product availability.
Fiberstore (FS.COM) | Push-Pull Tab Patch Cords Make High Density Cabling Easy and Elegant