Beruflich Dokumente
Kultur Dokumente
Software Releases 1
Legend: = Supported
II+
6.0.9.x
7.0.x
7.0.1.2
II+
3100
3100-NB
iNFINITI Remotes
7.1
8.0.2.1
8.3
8.3.1
iDX 1.0
iDX 1.1
iDX 2.2.0
iDX 2.3
7300
7350
M1D1
M0D1
Rx Only
5
5
M1D1-TSS
X1 Evolution Remote
X3 Evolution Remote
XLC-10
eP100
XLC-11
XLC-M
eM0DM (-FIPSL2)
eM1D1 (-FIPSL2)
M1D1-IND
M1D1-T-IND
Ruggedized Equipment
4
4
Notes:
1. Not all iDirect releases are listed. This matrix shows only releases in which we introduced new hardware, or in which we stopped supporting specific hardware.
If you need information about other releases not mentioned in this matrix, contact the TAC at tac@idirect.net.
In some releases of iVantage iBuilder software, you may be allowed to select hardware that is not supported.
In these cases, this matrix should be used as your tool for determining the latest and most accurate information.
2. NM II+ with serial numbers below 6000 are not supported.
3. Operates in Legacy Mode only.
4. Excludes iDS 7.0.0.x and 7.0.1.1.
5. TRANSEC Mode is not supported.
6. Only M=1 is supported, and TRANSEC is supported in this mode.
X5 Evolution Remote
Other
iDX 3.1
M1D1-T
iDX 3.0
M1D1-iSCPC
Evolution
iDX 2.2.0
M0D1-NB
Evolution Remotes
iDX 2.1
iConnex 300
iNFINITI Hubs
iDX 2.0
3125
8.2
2
8350
iNFINITI
8.0.2.7
New