Beruflich Dokumente
Kultur Dokumente
STEELE
Albuquerque, NM 87111
www.linkedin.com/in/davesteele505
505.710.0031
dave.steele.505@gmail.com
PROFESSIONAL EXPERIENCE
UNITED TECHNOLOGIES AEROSPACE SYSTEMS (formerly Goodrich ISR), 1996
2015
Albuquerque, NM
Production / Manufacturing Engineer
Developed product flow requirements and work instructions (travelers) and
determined need for special tooling and training. Supported design reviews, cycletime reduction, process improvement, make / buy analysis, problem analysis,
equipment analysis and selection. Established design for manufacturability
guidelines and drafting guidelines based on customer contractual requirements and
approved engineering drawings. Performed departmental quality audits.
Specified, purchased, set up, wrote operating procedures and trained employees
for circuit board solvent cleaning system used for cleaning space flight hardware
without failure for over 18 years.
Managed and supervised companies through hole technology assembly line for a
2 year period. Reduced assembly defects by 50 percent during this period.
DAVID M. STEELE
dave.steele.505@gmail.com
PAGE TWO
ADDITIONAL EXPERIENCE
UNC ANALYTICAL SERVICES, Albuquerque, NM
Environmental Engineer
Reviewed applicable DOE orders and environmental regulations and helped develop
regulatory compliance data base for the Waste Isolation Pilot Plant.
Performed
environmental audits of various DOE facilities. DOE Q clearance was held for this
position.
GOODRICH ISR SYSTEMS (formerly Gulton Data Systems), Albuquerque, NM
Production / Manufacturing Engineer and Environmental Safety Officer
Was facilities environmental and safety contact responsible for compliance.
Developed product flow requirements and work instructions (travelers) and
determined need for special tooling and training. Supported design reviews, cycletime reduction, process improvement, make / buy analysis, problem analysis,
equipment analysis and selection. Established design for manufacturability
guidelines and drafting guidelines based on customer contractual requirements and
approved engineering drawings.
UNIDYNAMICS PHOENIX INC., Phoenix, AZ
Design Engineer
Designed and developed of pyrotechnic devices. Design worked include mixing of
various propellants loading and testing initial designs when necessary.
Was
responsible for design through manufacturing, scheduling and shipment of
hardware. DOD secret clearance was held for this position.
EDUCATION / CERTIFICATIONS