Beruflich Dokumente
Kultur Dokumente
Tutorial 6
11 April 2015
1. An induction machine has a stator impedance of 1.0 + j 3.0 , rotor impedance of 1.0
+ j 2.0 and a no-load shunt impedance of 10 + j 50 . The voltage per phase is 240
V and Rc =19 . Estimate at a slip of 5%:
(a) stator current
(b) equivalent rotor current
(c) mechanical power developed and
(d) power factor
2. A star connected squirrel cage induction machine rated 7.5 kW, 230 Volts, 4 pole, three
phase 50 Hz has its full load torque at slip of 0.04. It has R1 = 0.36 , X1 = X2 = 0.47
, R2 = 0.222 and Xm = 15.5 per phase. Assuming that the shunt branch is
connected across the supply terminal, estimate:
(a) maximum electromagnetic torque at rated voltage and frequency.
(b) slip at maximum torque.
(c) developed starting torque at rated voltage and frequency.
3. A 3 phase 400 V star connected induction motor has a stator impedance 0.06 + j 0.2
and equivalent rotor impedance 0.06 + j 0.22 . Determine:
(a) maximum gross power output.
(b) slip at which maximum gross power is observed.
4. Following are results from a 400 V three phase delta connected induction motor. No
load test : 400 V; 3.0 A; 645 W. Short circuit test : 200 V; 12.0 A; 1660 W. Friction and
windage loss : 190 W. Estimate:
(a) loss and magnetising components of no-load current
(b) no-load power factor
(c) no-load resistance R0 and reactance X0 .
(d) equivalent resistance and reactance per phase as referred to stator.
(e) power factor under blocked rotor conditions.
(f) blocked rotor current with normal applied voltage of 400 V across stator
Assume stator resistance as 5 /phase.
5. A 200 V three phase star connected induction motor takes 25 A at a line voltage of 30 V
with rotor locked . With this line voltage power input to the motor is 440 W, and core
loss is 40 W. The DC resistance between a pair of stator terminal is 0.1 . If the ratio
of AC to DC resistance is 1.6, find:
Page 2