Beruflich Dokumente
Kultur Dokumente
Model name
Type
Resolution
Memory
Gradation
Type of originals
Maximum document size
Copy size
Paper size
Non-effective
image area
1st copy output time
Warm-up time
Continuous copy speed
Magnification
!
"! # $%&%'
bizhub PRO 1050e
Console
600 dpi x 600 dpi
256MB (DIMM) + 10GB HDD capacity of 40GB
256 levels
Sheet, book, 3D objects
A3 (297mm x 420mm)
A3, B4, A4/A4R, B5/B5R, A5, Wide size paper (max: 324mm x 460mm)
Top bottom edge: 2.0mm 2.0mm
Right / Left edge: 1.5mm 1.5mm
Less than 6 minutes (at room temperature of 20C and the rated voltage)
A4: 105 sheets/min., A3: 60 sheets/min.
1:1 0.5% or less
1:1.154/1.224/1.414/2.000
Scan resolution
Speed
Interface
Scanning
1:0.866/0.816/0.707/0.500
25% to 400%, adjustable in 1% increments
25% to 400% (0.1% units in horizontal scanning direction,
0.05% units in vertical scanning direction)
Paper weight
Multiple
Double-sided
copying
1 9999 sheets
Power
Power
consumption
Dimensions
(W x D x H)
Weight
Image compression
Paper supply
()
(
!
"! # $%&%'
Direct
Fixed Enlargement
ratio
Reduction
Type
CPU
Memory
Hard disk
Print size
Speed
Resolution
Gradation
PDL
Protocol
OS
Fonts
Interface
Low voltage Pentium III Tualatin 933MHz, Access memory speed 133MHz
512MB
20GB or more (Standard)
A3, B4, A4/A4R, B5/B5R, A5
A4: 105 sheets/min.
2,400dpi x 600dpi equivalent
Binary
PCL6 (Standard), Adobe PostScript3 (Standard)
TCP/IP (LPR, RAW), IPX/SPX (NDS, Bindery), NetBEUI, EtherTalk, IPP
Windows 98 / Me, Windows NT4.0 / 2000 / XP
Mac OS 8.0 or higher, Mac OS X (10.2/10.30)
PF-701
3 x 2,000 sheet paper feed unit, A5-A3 , 50-244g/m (all trays), 50-300g/m (middle tray), all
trays universal
FS-503
Finisher with 2 trays, max. 3,000 sheets main tray, 200 sheets sub tray, A5-A3 , 50-244g/m2 (50300g/m2 sub tray), 100 sheet / multi-position stapling, staple cut function
SD-501
Saddle stitcher with fold and trim functions A4-A3; stitching / trimming: 50 sheets, 50-244g/m2; center
fold: 50-200g/m2; 3-fold: 50-90g/m2, max. 5 sheet folding; exit tray: max. 200 sheets/50-300g/m2
FD-501
2 x 500 sheet multi-fold, post inserter, punch unit; main tray: A5-A3 , 50-244g/m2, max. 2,500 sheets,
sub-tray: A5-A3+, 50-300g/m2, 200 sheets; 2/4 hole punch, A5-A3, 64-200g/m2; booklet / letter (in/out)
/ Z-fold, double-parallel and gate-fold; A4-A3, 50-130g/m2 (50-90g/m2, double-parallel / gate-fold);
max. 30 sheet folding, post inserter for A5-A3+, 50-300g/m2; 2 trays x 500 sheets
LS-501
LS-502
PB-501
5,000 sheet stacker (main tray), 200 sheet (sub-tray), A5-A3 , 50-244g/m2 (50-300g/m2 in sub-tray)
#
,
-
!.
bizhub and PageScope are registered trademarks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
Windows is a registered trademark of Microsoft Corporation.
Adobe and PostScript are registered trademarks of Adobe Systems, Inc.
All other brand and product names are registered trademarks or trademarks of their respective companies.
As an ENERGY STAR Partner, KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
ENERGY STAR is a registered trademark in the U.S.
Meet ENERGY STAR Guidelines
Use Recycled Materials
Toner Recycle Mechanism
Production at ISO-Certified Factories
Please read and follow the instruction manual to ensure safe operation.
Only operate using appropriate power supply and voltage.
Connecting the earth wire to an inappropriate place may cause explosion or electric shock.
Please connect accordingly (Taiwan and the Philippines only).
!
"! # $%&%
/0
)
0 ( $&1%23
! ( $&1%2
Pay-for-print
business
Used for assessing the level of IT security a product provides, the ISO 15408 international standard sets a
strict guideline for evaluating security policy, program design documents, source code, manuals, and other
factors. A product qualifies for official designation as ISO/IEC 15408 compliant only when an independent
testing facility under the International Common Criteria for Information Technology Security Evaluation
("Common Criteria" or CC) has determined that the product meets CC standards.
*The ISO 15408 certification applies only to IT security capabilities. This certification is NOT a product guarantee.
KONICA MINOLTA
BUSINESS TECHNOLOGIES, INC.
http://www.biz.konicaminolta.com
9251-3160-01
Printed in Japan
Commercial
printing
On-demand for
Production Print
Professionals
Data center
print
managing
In-house-CRD
printing
Your customers demand quality, speed and affordability, and expect customized flexibility at every stage
of the process. The problem is, each customer has unique needs, requiring your printing infrastructure to
handle jobs it wasnt designed for. Introducing the bizhub PRO 1050e, a versatile on-demand printing
solution with all the power and flexibility you need to satisfy a wide range of customer printing needs
Synergizing back-office productivity with front office usability, the bizhub PRO 1050e gives you the tools
to develop new business opportunities for yourself.
Pay-for-print
business
Commercial
printing
On-demand for
Production Print
Professionals
In-house-CRD
printing
Data center
print
managing
Without the need to create film, press plates or power up an off-set printing press, on-demand
capabilities offer high-speed, PC-to-paper printing solutions. The result is substantial cost and time
saving, especially for small lot and quick turnaround printing requirements. On-demand printing lets
you shift the power to where you need it most.
Note: product here and on the cover is shown with optional equipment
SYSTEM 1
NEW
SYSTEM 2
FS-503
NEW
SYSTEM 3
FD-501
SD-501
FD-501
SYSTEM 5
Built-in controller
Multi-tasking (2 compression/expansion chips)
Transmission function
Image editing function
FS-503
SYSTEM 6
5,000-sheet stack/shift
Accommodates multiple attachments
SD-501
SYSTEM 4
FS-503
FD-501
FS-503
Main unit:
Paper capacity: 1,500 sheets x 2
Folder (FD-501):
6 types of folding
Large-capacity stacker
(LS-501/502):
Paper capacity: 5,000 sheets
A4
A3
sheets/min.
105
sheets/min.
High-speed output
High-speed scanning
High-speed output
The bizhub PRO1050e is an ideal solution for clients who employ variable
printing,* 3 CRM techniques for strategic planning and marketing activities.
Customers names and addresses can be customized and in some cases, so can
the content of direct mail literature and pamphlets. Providing this kind of targetfocused information stimulates demand.
*1 At a room temperature of 20C, and with the proper voltage rating.
*2 For A4, platen, and straight delivery.
*3 Requires additional software.
60
* There are restrictions on thin paper types (40 49g/m ) that may be used.
*2 244 to 300 g/m2 paper can only be loaded in the middle tray of the optional large-capacity
PF701 tray.
Transmission sensor
Paper
Adding the optional Pre-Printed paper Feeding Kit PP-701* allows the slippage caused by
ink or powder to be reduced. In addition to the standard air-assist function, air is applied
also from the rear end of the paper, ensuring the transportation of the paper with
* Optional. Installable on PF-701.
perforations or fold lines.
Detects space
Reception sensor
* Optional.
Output
1050e
Sends command
to Main unit
Main unit
PC
324 mm x 460 mm
Significantly
reduced output time
Splitting the
output data
Output
1050e
Sub unit
Color material
Polymerized toner
Wax
6.5
From size setting to finishing, print jobs can be classified by work and function type, while
an intuitive, functional touch panel design and simple key design improve operability.
While bizhub PRO offers high-quality copying at 600 x 600 dpi for all scanned
originals and with very little degradation between generations, print data is
digitally enhanced to output at the equivalent of 2400 x 600 dpi. With the
improved clarity, detailed photographic images, illustrations and even difficult
gradations print beautifully.
'06/4/17 12:51
'06/4/17 12:51
'06/4/17 12:51
'06/4/17 12:52
06/4/17 12:52
Original
Scanned Data
The high-precision, highly rigid body is designed to handle the rigorous output
conditions of a professional printing environment
Polymerized toner has unique features that help the durability of printed
images. Smaller particles print without soaking through the paper, while the
ink itself is highly resistant to discoloration. In addition, there is less
deterioration when printed materials are stored for long periods of time.
* #
4/17 12:52
Polymerized toner
Thumbnail view
"
*1 Optional.
*2 As of 2004, as determined by Konica Minolta.
Punch function
+
'
(
'
Center-fold
With a reinforced variable book-processing function, it is possible to staple*1 and fold*2 designated pages.
Feeding different paper types is also possible. Additionally, saddle stitched pagination or perfect bind
pagination for bookbinding can be performed in 2-in-1, 4-in-1 and 8-in-1 configurations. (For 2-in-1 jobs,
single-sheet two-fold processing is also possible).
Book
Cutting gap
Internal
three-fold
External
three-fold
Double-parallel
Z-fold
"(
4
5
2 in 1
Gatefold
4 in 1
8 in 1
Staple functions
* Optional.
Corner stapling
(vertical)
$
,
"
Spine
Finished size:
A4, Book
Fore edge
Tail edge
The PB-501* Perfect Binder allows the user to bind books of up to 300 sheets / 600
pages*2 (30mm thick or less). The system makes binding of thick and multi-page books
simple and features simultaneous printing and gluing processes. The paper alignment
technique provides a professional finish to books without three-sided cutting, enabling
efficient printing and binding through in-line processing. Additionally, the system will
* Optional. * 64g/m
accept up to 4 sheets of Z-folded insert sheets.
1
-
%"&
(
2-point stapling
(horizontal)
! "#
Top edge
2-point stapling
(vertical side)
The LS-501/502 Stacker with dolly can handle up to 5,000 sheets. Using two
stackers in tandem, up to 10,000 sheets are always at the ready. After paper is
delivered from the system, it can be carried to the next process as is with the
dolly. This paper delivery capacity significantly improves work efficiency.
* Optional.