Beruflich Dokumente
Kultur Dokumente
Reinforcing Bar
Reinforcing Fabric
Square Mesh
Rectangular Mesh
Trench Mesh
Reinforcing Accessories
Fitments
Metal Bar Chairs
Metal Bases
Plastic Chairs
Fastwheels
Deck Chairs
Bar Guards
Dowel Caps
Tie Wire
Dowel Bars
Polyfilm
Jointex
Flexible Roll
Key Joint
Building Products
Reflor
Bondek
Galvanised Weldmesh
Field Gate Infills
Sheepyard Mesh
Fencing
Site Safety Fence
4
4
4
5
5
6
6
6
7
7
7
7
8
8
8
8
9
9
9
9
10
10
11
11
12
13-15
page 1 of 15
SERVICES
DELIVERY
SERVICE
DESCRIPTION
PRICE $
NORMAL
DELIVERY
SPECIAL
DELIVERY
BONDEK
DELIVERY
$POA
SERVICE
DESCRIPTION
PRICE $
LARGE WELDED
CAGES
SMALL WELDED
CAGES
COMPLEX
BENDING
SAW CUTTING
CAGES DELIVERY
BAR SERVICES
P.O.A
P.O.A
$800.00 Per Tonne Extra to
Steel Rate
$6.00 Per End
GALVANISING
SERVICE
DESCRIPTION
HOT DIPPED
GALVANISED
PRICE $
MESH SERVICES
SERVICE
DESCRIPTION
PRICE $
$POA
HARD DRAWN
WIRE
Sydney:
Newcastle:
Wollongong:
page 2 of 15
REINFORCING BAR
STOCK LENGTHS
SIZE
mm
GRADE DESCRIPTION
Mass per
Metre (kg)
Metres per
Tonne (approx)
PRICE PER
TONNE $
N12
N16
N20
N24
N28
N32
N36
S12
0.910
1.618
2.528
3.640
4.954
6.471
8.190
0.910
1099
618
395
275
202
155
122
1099
2400.00
2400.00
2400.00
2400.00
2400.00
2400.00
2400.00
2400.00
PROCESSED STEEL
SIZE
Mm
GRADE DESCRIPTION
PRICE PER
TONNE $
R6
R10 to R33
N10
N12
N16
N20 to N36
N40
2680.00
2680.00
2540.00
2540.00
2540.00
2540.00
POA
Processed Steel rates include scheduling, cutting, bending, tagging and bundling
Lead Times apply for scheduled and processed steel
Sydney:
Newcastle:
Wollongong:
page 3 of 15
REINFORCING FABRIC
Square & Rectangular Rib Mesh sheet size 6metre x 2.4 metres (14.4 square metres)
Cut & Bent Mesh will incur an additional charge Price On Application
SL81
SL102
SL92
SL82
SL72
SL62
SL52
STANDARD
UNIT
MAIN
WIRE mm
EDGE
WIRE mm
CROSS
WIRES mm
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
7.60@100
9.50@200
8.55@200
7.60@200
6.75@200
6.00@200
4.75@200
7.60@100
6.75@100
6.00@100
6.00@100
4.75@100
4.75@100
4.00@100
7.60@100
9.50@200
8.55@200
7.60@200
6.75@200
6.00@200
4.75@200
MASS
kg
PRICE PER
SHEET $
105
80
65
52
40
33
21
508.00
381.00
302.00
236.00
185.00
155.00
104.00
STANDARD
UNIT
MAIN
WIRE mm
CROSS
WIRES mm
MASS
kg
PRICE PER
SHEET $
RL1218
RL1118
RL1018
RL918
RL818
RL718
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
11.90@100
10.65@ 100
9.50@ 100
8.55@100
7.60@100
6.75@100
7.6@200
7.6@200
7.6@200
7.6@200
7.6@200
7.6@200
157
131
109
93
79
68
806.00
624.00
514.00
433.00
370.00
315.00
STANDARD
UNIT
MAIN
WIRE mm
CROSS
WIRES mm
SL62UTE
SL72UTE
Sheet
Sheet
6.00@200
6.75@200
6.00@200
6.75@200
MASS
kg
PRICE PER
SHEET $
18
23
90.00
115.00
MAIN
WIRE mm
CROSS
WIRES mm
WIDTH
metres
LENGTH
metres
MASS
kg
PRICE PER
SHEET $
L08TM3W
L08TM4W
L08TM5W
L11TM3W
L11TM4W
L11TM5W
L12TM3W
L12TM4W
L12TM5W
7.60@100
7.60@100
7.60@100
10.65@100
10.65@100
10.65@100
11.90@100
11.90@100
11.90@100
4.00@300
4.00@300
4.00@300
4.75@300
4.75@300
4.75@300
4.75@300
4.75@300
4.75@300
0.2
0.3
0.4
0.2
0.3
0.4
0.2
0.3
0.4
6
6
6
6
6
6
6
6
6
7
9
12
13
18
22
16
22
27
39.00
49.00
65.00
74.00
97.00
124.00
91.00
118.00
162.00
Sydney:
Newcastle:
Wollongong:
page 4 of 15
REINFORCING ACCESSORIES
FITMENTS (STIRRUPS) R6 25 per pack
REFERENCE
SIZE mm
PRICE PER
PACK $
REFERENCE
SIZE mm
PRICE PER
PACK $
ST1520
ST1530
ST1540
ST2020
ST2025
ST2030
ST2035
ST2040
ST2045
150 X 200
150 X 300
150 X 400
200 X 200
200 X 250
200 X 300
200 X 350
200 X 400
200 X 450
44.50
49.90
62.00
46.30
47.50
52.50
54.90
59.40
64.80
ST2050
ST2530
ST2540
ST3030
ST3035
ST3040
ST3045
ST3050
ST4045
200 X 500
250 X 300
250 X 400
300 X 300
300 X 350
300 X 400
300 X 450
300 X 500
400X450
68.30
59.40
62.30
63.80
65.30
73.50
74.00
76.00
78.30
SIZE mm
BC020
BC025
BC030
BC040
BC050
BC065
BC075
BC080
BC090
BC100
BC110
BC120
BC130
BC140
BC150
BC160
BC170
BC180
BC190
BC200
BC210
BC220
BC240
BC250
BC270
BC280
BC300
20
25
30
40
50
65
75
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
240
255
270
280
300
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
44.20
46.00
47.69
51.80
68.00
76.60
81.00
84.20
90.70
97.20
101.50
130.60
141.40
147.90
194.40
248.40
259.20
335.80
362.80
372.60
380.10
396.30
415.80
427.60
436.30
441.70
450.30
page 5 of 15
SIZE mm
BC320
BC340
BC360
BC380
BC400
320
340
360
380
400
25
25
25
25
25
453.60
455.70
457.90
460.00
462.20
METAL BASES
REFERENCE
SIZE mm
CHAIR HEIGHT mm
BASES-S
BASES-L
125 x 125
230 Diam
20-180
190-300
100
50
75.80
151.20
SIZE
mm
No. PER
BAG
PBCB2540
PBCB5065C
PBCB7590
PBCB85100
PBCB105110
PBCB115120
PBCB125130
PBCB135140
PBCB145150
25-40
50-65
75-90
85-100
105-110
115-120
125-130
135-140
145-150
100
100
100
100
50
50
50
50
50
64.80
69.10
81.00
87.40
106.90
118.80
127.40
172.80
181.40
HEIGHT
mm
No. PER
BAG
B20
B25
B32
B40
B50
B65
B75
20
25
30
40
50
65
75
100
100
100
100
100
100
100
37.80
40.50
42.10
44.20
55.30
64.80
79.90
PLASTIC FASTWHEELS
REFERENCE
No.
SIZE
mm
BAR SIZE
mm
FASTWH30
30
4-16
FASTWH40
40
4-16
FASTWH50
50
4-16
FASTWH65
65
6-20
FASTWH75
75
6-20
Please be aware, some products attract lead time for delivery
page 6 of 15
No. PER
BAG
PRICE /100
$
100
100
100
100
100
50.70
65.80
81.00
135.00
191.10
SIZE
mm
No. PER
BAG
BPDC1520
BPDC2530
BPDC3540
BPDC4550
BPDC6575
BPDC90100
BPDC110120
BPDC130140
BPDC150160
BPDC170180
BPDC190200
15-20
25-30
35-40
45-50
65-75
90-100
110-120
130-140
150-160
170-180
190-200
100
100
100
100
50
50
50
50
50
50
50
27.00
31.50
33.40
34.50
74.50
89.60
113.40
132.80
143.60
154.40
159.80
BAR GUARDS
REFERENCE No.
SIZE
mm
No. PER
BAG
BG1236
12 to 36
100
103.60
BAR SIZE
mm
No. PER
BAG
DC
10-20
100
74.50
TIE WIRE
REFERENCE
No.
DESCRIPTION
SIZE
mm
PRICE
$
CTW5
CTW280
CTW356
CT-BP
CT-BPGAL
5 kg Coil
250 x 3kg Cut Bundle
356 x 3kg Cut Bundle
1.5kg Belt Pack (coil)
1.5kg Belt Pack (coil) Galvanised
1.6
1.6
1.6
1.6
1.6
47.50
37.80
41.58
20.50
26.40
BAG TIES
REFERENCE
No.
DESCRIPTION
No PER
BUNDLE
CBT110
CBT125
CBT150
2000
2000
2000
81.00
83.10
87.40
page 7 of 15
REINFORCING ACCESSORIES
DOWEL BARS Grade 250R Friction Cut
FINISH
REFERENCE
DIAMETER
mm
LENGTH
mm
PRICE $
DWB16F400
16
400
8.30
DWB20F400
20
400
9.95
DWB16F600
16
600
9.15
DWB20F600
20
600
11.50
DWG16F400
16
400
9.15
DWG20F400
20
400
12.35
DWG16F600
16
600
10.80
DWG20F600
20
600
14.70
BLACK
GALVANISED
DESCRIPTION
PFB4X20
TG
186.80
9.60
JOINTEX
REFERENCE
No.
THICKNESS
mm
WIDTH
mm
LENGTH
m
PRICE / LENGTH
$
JT060
JT075
JT100
JT125
JT150
10
10
10
10
10
60
75
100
125
150
2.44
2.44
2.44
2.44
2.44
8.80
11.20
15.30
19.60
23.00
REFERENCE
No.
THICKNESS
mm
WIDTH
mm
LENGTH/ROLL
m
PRICE / ROLL
$
FJR50
FJR75
FJR100
FJR125
FJR150
FJR200
10
10
10
10
10
10
10
50
75
100
125
150
200
75
25
25
25
25
25
25
25
41.00
61.50
77.20
94.50
111.20
151.20
70.20
10
100
25
84.20
10
150
25
FJR150SB
Please be aware, some products attract lead time for delivery
117.70
FLEXIBLE ROLL
FJR075SB
FJR100SB
page 8 of 15
REINFORCING ACCESSORIES
CONNOLLY KEY JOINT & CAPPING (pegs included)
REFERENCE
No.
LENGTH
mm
HEIGHT
mm
STANDARD
PACK
PRICE EACH
$
KJ1006
KJ1506
KJ2006
6000
6000
6000
4-10
4-16
4-16
100
100
100
74.50
105.80
135.00
24 metre roll
24 metre roll
108.00
154.40
KJCRSTD
KJCPRIP
BUILDING PRODUCTS
FIELDERS - REFLOR 55
PRODUCT
CODE
GAUGE
mm
COATING
mm
WIDTH
mm
MASS
Kg/m2
PRICE/m2
$
REFLOR060
REFLOR075
REFLOR100
0.60
0.75
1.00
Z450
Z200
Z200
600
600
600
8.7
10.1
13.4
55.40
64.40
82.30
LYSAGHTS - BONDEK
PRODUCT
CODE
GAUGE
mm
COATING
mm
WIDTH
mm
MASS
Kg/m2
PRICE/m2
$
BDK060
BDK075
BDK100
0.60
0.75
1.00
Z350
Z200
Z200
590
590
590
8.6
10.1
13.4
55.40
64.40
82.30
2.50 x 25 x 25
3.15 x 50 x 50
4.00 x 50 x 50
4.00 x 50 x 75
4.00 x 75 x 75
4.00 x 100 x 100
1200 x 2000
1200 x 2000
1200 x 2000
1200 x 2000
1200 x 2000
1200 x 2000
page 9 of 15
WEIGHT
KG
8
7
10
9
7
6
PRICE PER
SHEET $
92.30
64.90
85.50
72.00
58.00
43.70
INDUSTRIAL SHEETS
DESCRIPTION
WEIGHT
KG
2.50 x 25 x 25
2400 x 3000
23
3.15 x 25 x 25
2400 x 3000
36
3.15 x 50 x 50
2400 x 3000
18
4.00 x 50 x 50
2400 x 3000
29
4.00 x 50 x 75
2400 x 3000
25
4.00 x 100 x 100
2400 x 3000
15
5.60 x 100 x 100
2400 x 3000
29
PRICE PER
SHEET $
289.50
369.30
251.90
271.30
232.50
184.60
258.70
DESCRIPTION
4.00 x 50 x 50
4.00 x50 x 75
5.60 x 100 x 100
2400 x 3000
2400 x 3000
2400 x 3000
WEIGHT
KG
29
25
29
PRICE PER
SHEET $
264.40
220.00
245.10
WEIGHT
KG
PRICE PER
SHEET $
DESCRIPTION
FGI-8G5
2400 x 1100 - 100 x 200 x 5mm
FGI-10G5 3000 x 1100 - 100 x 200 x 5mm
FGI-12G5 3600 x 1100 - 100 x 200 x 5mm
FGI-14G5 4200 x 1100 - 100 x 200 x 5mm
FGI-16G5 4800 x 1100 - 100 x 200 x 5mm
*FOR ALL OTHER SIZES P.O.A
7
9
10
12
14
47.80
35.30
41.00
47.80
55.80
SYM9-410G5
SYM11-410G5
DESCRIPTION
14
45.60
17
68.40
page 10 of 15
FENCINGF
GARDEN FENCE PANEL- PRE GALVANISED
CODE
DESCRIPTION
WEIGHT KG
GFP900-PG
GFP1200-PG
11
13
PRICE PER
SHEET $
91.20
101.40
DESCRIPTION
WEIGHT KG
SFP900-PG
SFP1200-PG
11
13
PRICE PER
SHEET $
91.20
101.40
DESCRIPTION
WEIGHT KG
BPP2-HDG
BPP1- PC
26
26
PRICE PER
SHEET $
148.20
171.00
DESCRIPTION
PRICE PER
FPP0900
LENGTH $
FFP1200
FFP1200PC
U- CLIPS
33.40
39.90
41.00
2.10
DESCRIPTION
SSF
SSFFP
DESCRIPTION
RP1565
2440 75 x 75 x 3.15mm
91.70
page 11 of 15
page 12 of 15
page 13 of 15
(vi) The Customer will prior to attaching any goods onto any land or building notify the owner of the land or building that
such goods are subject to this reservation of title clause, except only as provided by law;
(vii) The Customer releases and indemnifies the Company and its servants or agents from all claims for loss or damage
caused by the Company or its servants or agents in enforcing or attempting to enforce its rights under this clause 4.
5. Caveat
The Customer hereby charges in favour of the Company as security for the Customers obligations to the Company, all right
title and interest in any land held now by the Customer alone or jointly with anyone or acquired by the Customer at any time
hereafter as beneficial owner and as trustee of every trust. If the Customer defaults in payment of any amount owed to the
Company, the Customer specifically authorises the Company to lodge a caveat against any dealings with any such property
and appoints the Company to be the Customers Attorney for this purpose.
6. Orders and Cancellation
(i) The Company may at its absolute discretion refuse to supply goods or services for any reason whatsoever;
(ii) Should there be any discrepancy between the order by telephone as recorded and processed by the Company and later
confirmation in writing by the Customer, the Companys record of telephone order shall prevail;
(iii) Once an order has been accepted by the Company, the Customer can only cancel, vary or suspend the order (whether
in whole or in part) if the Company agrees in writing to such cancellation, variation or suspension;
(iv) The Customer agrees to accept delivery of all goods held by the Company or in transit in respect of such order.
(v) The Customer agrees to pay all costs, expenses and liabilities incurred by the Company in consequence of the
cancellation, variation or suspension of the order and accepts consequential delay.
7. Limitation of Liability
(i) The Company may compute an estimate of dimensions and quantities of goods based on plans or other information
given by or on behalf of the Customer. The Company does not accept any liability as to the correct computation of
any such estimate and the estimate is provided to the Customer as indicative only and the Company is not responsible
for any mistakes in the estimate. The Customer undertakes to check any such estimate and in any event accepts full
responsibility for the dimensions and quantities of goods ordered as independently computed by the Customer without
relying on the estimate.
(ii) The Customer warrants to the Company that it will not rely on representations made and/or advice given by the
Company or its employees in connection with the design, dimensions, installation or use of goods sold and agrees that
the Company shall not be liable for the consequences of any mistakes in such representation or advice even if made or
given negligently.
(iii) It is a condition of sale that any description or specification given by the Company or in printed literature of the
Company is for general indicative purposes only and does not render the Company responsible in any way except to
the extent that the goods shall comply with the standards set out in such description or specification and that such
description or specification shall not be taken as implying or giving any undertaking as to fitness for any particular
purpose.
(iv) If goods are required for a particular purpose, the Customer must clearly specify that purpose in writing in the order
placed with the Company and obtain written assurance from the Company that the goods when supplied will meet that
requirement. If the Customer does not specify the particular purpose and the Company does not expressly undertake
in writing that the goods will be fit for the specified purpose, then the Customer agrees that it did not rely on the skill
or judgement of the Company in relation to the suitability of the goods for a particular purpose.
(v) The Company shall not be liable for delay in delivery of the goods or delivery of the goods in instalments or failure to
deliver due to any cause whatsoever. The Customer shall not be relieved from any obligation to accept or pay for
goods by reason of any delay in or the instalment delivery of the goods. In no event shall the Company be responsible
for any loss of profits, penalties, disruption, expenditure and/or damages incurred and/or sustained by the Customer
due directly or indirectly to because of any delay in or the instalment delivery of the goods.
(vi) Any complaint by the Customer for failure to deliver or delayed delivery must be notified to the Company within
three (3) business days of the failure or delay in delivery. The Customer waives, foregoes, abandons and forgives
forever any claim whatsoever the Customer may have against the Company unless it has strictly complied with these
notification requirements.
(vii) If the goods are delivered by the Company to the Customer in a damaged state, or there is short delivery or incorrect
or faulty goods are supplied, the Customer must request the Company in writing for their replacement within eight (8)
hours of the delivery of the alleged damaged, short supplied, incorrect or faulty goods and the Customer must at the
time of the delivery, specify in the delivery docket to be given to the deliverer the nature and extent of the alleged
damage, short supply or incorrectness of the goods.
(viii)Any goods returned by the Customer will be held and/or disposed of by the Company on behalf of the Customer
unless the return of the goods is preceded by the complaint and the claim in writing as specified in the preceding
paragraph. The Customer must facilitate the inspection of the goods by a Company representative prior to return.
The acceptance of any returned goods shall not imply any acceptance by the Company of the Customers claim.
Mesh & Bar Pty Ltd ABN 35 084 464 746
15 Owen St Glendenning NSW 2761
86 Glenwood Drv Thornton NSW 2322
Unit 3 / 238 Berkeley Rd, Unanderra NSW 2526
page 14 of 15
(ix) Any claim, whatsoever against the Company arising in contract or otherwise howsoever and whether directly or
indirectly from the sale and delivery of goods including without limitation for failure to deliver, delayed delivery,
short delivery, supply of incorrect goods, damaged goods and/or defective goods shall be limited to the price of the
goods which was agreed by the Customer and the Company or in the absence of such agreement reasonable price
therefore confined to the quantity of the goods required to be delivered on the occasion by reference to which the
claim arises.
(x) To the fullest extent permitted by law all terms, conditions and warranties statutory or otherwise not expressly
provided in these Terms and Conditions of Sale are excluded. To the extent that any term, condition or warranty not
expressly provided in these Terms and Conditions of Sale cannot be excluded due to the provisions of Section 68A of
the Trade Practises Act 1974 or any other statute and the Company breaches such term, condition or warranty and the
Customer makes a claim with which the Company agrees that the goods were damaged or defective at the time of
delivery the Companys liability is limited to replacing these goods or crediting the Customer with the purchase price
of the goods at the Companys option.
(xi) The Customer will indemnify the Company for any claims whatsoever and howsoever made by a third party against
the Company for any default of the Company in relation to or directly or indirectly arising from any contract and/or
arrangement made between the Company and the Customer.
8. Delivery
(i) Unless agreed otherwise in writing prior to delivery, unloading of goods shall be the Customers responsibility and the
Company will not be responsible for any damage whatsoever resulting from the unloading of the goods by the
Customer or by anyone on its behalf, or by the Companys employee or agent.
(ii) The Customer indemnifies the Company from any claim whatsoever resulting from the Customer, its employee or
agent loading goods supplied by the Company on any vehicle or unloading goods supplied by the Company from any
vehicle.
(iii) Where goods are delivered to a particular site the goods will be entirely at the Customers risk when delivered.
(iv) If the cartage contractor or driver is not satisfied that access to the delivery site is safe the goods will be unloaded at
kerbside adjacent to the delivery address.
(v) A quantity, description, date, time and place of delivery as shown on the Companys invoice or delivery docket shall
be conclusive evidence of quantity, description, date, time and place of delivery of such goods.
(vi) If the site is unattended goods will be unloaded on the site or if the site is not accessible at the kerbside adjacent to the
site and the delivery docket/manifest signed by the cartage contractor or the driver of the Company that the goods
were delivered accordingly shall be conclusive evidence of due delivery of the goods.
(vii) The Company if requested to enter a property accepts no responsibility for any damage caused by the Company or its
agent.
(viii)A standard delivery charge as published by the Company from time to time in its price list will apply.
(ix) Where trucks are held on a site for more than 1 hour additional costs will apply.
(x) For delivery of lengths over 9 metres the Customer must enquire at time of ordering about additional delivery costs.
(xi) Deferred delivery of goods already manufactured for the Customer will incur storage charge of 0.5% per week of
invoice value.
Sydney:
Newcastle:
Wollongong:
page 15 of 15