Sie sind auf Seite 1von 16

GENERAL CLAMP INDUSTRIES, INC.

Stationary Transferable and Mobile Securing Attachment


for Lifting Equipment and Personal Tie-off Anchorage.

GENERAL CLAMP INDUSTRIES, INC.


INDEX
Introduction

Index

Corporate Profile

Clamp Products

Pipes & Angle Clamps

Trolleys

Plate Clamp Products

Fall Protection

Technical:
Product Safety

Guidelines

Notes

13

Introduction
Safety Is Everybodys
Business
Our contribution to SAFETY is in securing the
QUALITY and RELIABILITY of our SUPERCLAMP
products, which are used in Mining, On-Shore
and Off-Shore Mineral Exploration, General
Maintenance, and the Construction Industries.
Each SUPERCLAMP product is proof tested
to two times the safe working load. Tests to
destruction ensuring a 5-1 factor of safety are
employed throughout the design, development,
and manufacturing process of the products.
Our worldwide distribution network will
provide active and consultative support to assist
in the selection of safety equipment to suit your
lifting applications.
Should our standard range of SUPERCLAMP
products not fulfill your immediate requirements,
then please contact your nearest authorized
SUPERCLAMP supplier who will gladly quote
for any special applications you may have.

Yours sincerely,
GENERAL CLAMP INDUSTRIES, INC.

Made in the USA

CORPORATE PROFILE

GENERAL CLAMP INDUSTRIES, INC.


Corporate Profile

General Clamp Industries, Inc. is one of a group of companies active in the lifting industry since 1965. We
have over 40 years of successful service in the lifting and material handling industry. Beginning in 1965 as an inspection
contractor, we quickly grew until today where we are one of three related companies, all active in the lifting field.
General Clamp Industries, Inc. manufactures SUPERCLAMPTM beam and girder clamps and trolleys. This
unique line of patented under hook lifting accessories is designed around safety and ease of use. SUPERCLAMP
incorporates a left and right hand threaded adjustment bar for fast installation and removal. The design ensures that each
clamp need be hand tightened only...no tools required. General Clamp Industries, Inc. also manufactures the only
American made fully adjustable one piece beam trolley. The SUPERCLAMP A, B, and BA series of trolleys requires no
tools or spacers to be safely installed on the beam flange. Many of our standard clamp and trolley models are approved
for personnel use as PFAS Anchorage points.
General Clamp Industries, Inc. is conscious of its responsibility to industry and workers, and we ensure that
all engineering, design and manufacture is carried out to exacting quality standards and in strict accordance with all
regulations. We can guarantee top quality products because they are all made in the U.S.A. with rust resistant A-588
Steel. SUPERCLAMP products are certified to meet or exceed all existing state and federal codes, and each unit is load
tested prior to shipping.
Our sister companies, United States Crane, Inc. and United States Crane Certification Bureau, Inc. are
also directly involved in the lifting and hoisting industry. United States Crane, Inc. manufacturers a line of Personnel Lifting
Platforms under the trade name SUPERCAGETM. SUPERCAGE is available in three basic configurations; as a Suspended
Platform; as a Direct Fixed Attachment Platform; and a ForkLift Platform.
United States Crane, Inc. also specializes in the design, manufacture and rebuilding of mobile and tower crane
and derrick booms. With over 40 years of experience in this field and a corporate mission for quality and safety, United
States Crane is the leader in this field.
United States Crane Certification Bureau, Inc. provides crane and boom inspections for safety, preventative
maintenance, OSHA certification, and accident investigation purposes. Our qualified personnel are often called upon
to provide expert witness testimony in accident investigations and court proceedings. In addition to these services, we
provide operator training and certification.
Over the past 40 years United States Crane has developed a reputation for quality, service and safety in all our
operations and products. Our commitment to safety and customer satisfaction includes maintaining full and complete
insurance coverage. General Clamp Industries, Inc. is part of a truly integrated American owner group of companies
focused on meeting the exact needs of the lifting industry.

CLAMPS
A

MODEL
PH1
PH2
PH3
PH4
PH5

WLL at 0 Vertical
Lbs
kg
2240
1016
4480
2032
8960
4064
13440
6096
17920
8128

Max. Pipe Wall


Thickness
1"
1 1/8"
1 1/2"
1 7/8"
2 3/4"

Average
Weight
Lbs
13
18
33
39
57

B
A
*
Average
WLL at 0 Vertical Adjustment inch. To Accommodate Beam Weight
Lbs
kg
Flange
Thickness
(max)
inch
min-max
Permanently Fixed Adjustable Girder Clamps Lbs
USC3A
6720
3048
6" - 8"
1"
30
USC4
8960
4064
6" - 12"
1"
52
Designed
for
light
industrial
applications
USC5
11200
5080
6" - 12"
1"
63
USC5Afor permanent
11200
5080
6" - 12"point above machinery
1 1/2
63
overhead
anchor
or equipment
Ideal
USC5D grip
22400
10160
6" - 12"
1"
74
USC5D400
Positive
on flange
22400 10160
9" - 16"
1"
95
MODEL

Lightweight one piece adjustable design


For use at 0 from vertical
MODEL
PFC1
PFC2
PFC3

B
C
A
Average
WLL at 0 Vertical Jaw Grip Adjustment Jaw Aperture Inside Shackle Crown Weight
inch min-max
Lbs
inch
Lbs
kg
to Spacer inch
7/8
1 1/2
4
2240
1016
3 " - 7 1/2
6
7/8
1 1/2
4480
6096
3 " - 7 1/2
7
7/8
1 1/2
6720
8128
3 " - 7 1/2

Average
A
B
C
*
Average
Max.
Wall AJaw
Weight
WLL at 0 Vertical Jaw
GripPipe
Adjustment
Aperture Inside Shackle Crown Weight
Lbs
kg
Thickness
Lbs
inch min-max
to Spacer inch
inch
Lbs
Lbs
kg
PH1
2240
1016
13 7/8
B 4480
S1
2032
3" - 1"
7 1/2
9
3 3/4
PH2
4480
2032
1
1/8"
18
7/8
S2
6720
3048
3" - 7 1/2
11
3 3/4
PH3
8960
4064
1
1/2"
33
7/8
S2A
6720
3048
3" - 7 1/2
18
3 3/4
PH4
13440
6096
39 7/8
S3
8960
4064
6"1 -7/8"
10"
24
3 7/8
PH5
17920
8128
2
3/4"
57
7/8
S3X
11200
5080
3" - 7 1/2
22
4 1/8
S3A
11200
5080
6" - 12"
1 5/8
33
4 1/8
S4S
13440
6096
8" - 18"
1 5/8
41
4 1/8
S4A
22400 10160
8" -A18"
1 5/8 B
62
4 1/2
*
S12
33601 15241
8" - 18"
2"
109
5 Average
7/8
Beam5 7/8
WLL
at 0 Vertical
Weight
MODEL
S14
33601
15241 Adjustment
16" C
- 24"inch. To Accommodate
2 1/2
129
Lbs
kg
Flange Thickness (max) inch Lbs
min-max
USC3A
6720
3048
6" - 8"
1"
30
USC4
8960
4064
6" - 12"
1"
52
B 1"
C 63
Average
USC5
11200 * 5080
6" -A12"
at 0 Vertical
Jaw Aperture
USC5A
11200
5080 Jaw Grip
6" -Adjustment
12"
1 1/2Inside Shackle63Crown Weight
MODEL WLL
Fixed
Jaw
Adjustable
Girder
Clamps
inch
inch 1"
to Spacer 74
inch
Lbs
kg
Lbs
USC5D
22400
10160
6"min-max
- 12"
USC5D400
22400
10160
- 16"
S5
6720
3048
39"1/2
- 12"
1" 1"
3 3/495
22
S5Apiece6720
3048design3 1/2 - 12"
1"
4 1/2
31
One
adjustable
S6
11200
5080
3 1/2 - 12"
1"
4 1/2
31
Used
S6A for lifting,
11200 pulling
5080 or as 3an
1/2anchor
- 12" point 1"
4 1/2
34
22400 10160
3 1/2
4 C1/2
47
B1"
A - 12"
NoS11tools required
for mounting/removal
Average
WLL
at 0 Vertical
MODEL
Integrated
lifting
shackleJaw Grip Adjustment Jaw Aperture Inside Shackle Crown Weight
inch min-max A
Lbs Average
inch
Lbs
kg
to Spacer inch
B
Positive grip left/right
adjusting bar
WLL atthreaded
0 Vertical
1 1/2 Max. Ht. 4 Weight
PFC1 MODEL
2240
1016
3 " - 7 1/2 Jaw Grip 7/8 Jaw Aperture
Lbs
Lbs safe
kg
Adjustment
inch
inch 1 1/2Adjustment6
Designed
with maximum
grip adjustment
7/8
PFC2
4480
6096
3 jaw
" - 7 1/2
S7
6720
3048
20
7/8 1 1/2
7
For
up to 15
from vertical
PFC3use at6720
8128
3 " - 7 1/2 3" - 7 1/27/8
1 1/4 32
S7A
6720
3048
3" - 7 1/2
23
7/8
Approved
for Personnel
tie-off use*
S8
8960
4064
6" - 10"
41
7/8
S1 and S2
are not 8960
approved
for side load
1 1/4 32
S8A
4064
6" - 10"
7/8
44
MODEL
MODEL

Universal SUPERCLAMP
Can be fully loaded at any angle, i.e. 90 in 360 rotation
Designed for side load applied at full ratedAverage
capacity
Weight
Max. Pipe Wall
MODEL WLL at 0 Vertical
Low
headroom
Lbs anchor
kg point Thickness
Lbs
Single
point
PH1 or twin
2240lifting1016
1"
13
PH2weight4480
2032adjustment
1 1/8"
Light
one piece
design 18
PH3
8960
4064
1 1/2"
33
Positive
on beam
flange and
web
PH4 grip
13440
6096
1 7/8"
39
PH5 for lifting,
17920 pulling
8128or as an2 anchor
3/4"
Used
point57
Approved for Personnel tie-off use*

A
B
C
*
Average
A Jaw ApertureB Inside Shackle Crown
C
D
WLL at 0 Vertical Jaw Grip Adjustment
Weight
MODEL
Jaw Grip inch
Jaw Aperture
Inside inch
Shackle Crown
inch min-max
to Spacer
Lbs Inside S
Lbs WLLkgat 0 Vertical
inch7/8 inch
Lbs
kg3" - 7Adjustment
to Spacer inch 9
Width
B
A
S1
4480
2032
1/2
*
3 3/4
Average
S15
44800
20320
8"
18"
2"
8
1/8
4 9/
7/8
S2
6720
3048
3"
7
1/2
11
3
3/4
To
Accommodate
Beam
WLL
at
0
Vertical
Weight
Adjustment
inch.
MODEL
S16
20320
4 9/
S2A
6720 44800
3048
3" - 7 1/216" - 24" 7/8 2 1/2
3 3/4 8 1/8 18
Lbs
kg
Flange Thickness (max) inch Lbs
min-max
7/8
S17
56000
25400
8"
18"
2"
8
1/8
51
S3
8960
4064
6" - 10"
24
3 7/8
USC3A
6720
3048
6" - 8"
1"
30
S18
25400
8
1/8
51
S3X
11200 56000
5080
3" - 7 1/216" - 24" 7/8 2 1/2
22
4 1/8
USC4
8960
4064
6" - 12"
1"
52
S19
30480
51
S3A
11200 67200
5080
6" - 12" 8" - 18" 1 5/8 2 1/2
4 1/8 8 1/8 33
USC5
11200
5080
6" - 12"
1"
63
S20
30480
51
S4S
13440 67200
6096
8" - 18" 16" - 24" 1 5/8 3"
4 1/8 8 1/8 41
USC5A
11200
5080
6" - 12"
1 1/2
63
S4A
22400
10160
8" - 18"
1 5/8
62
4 1/2
USC5D
22400
10160
6" - 12"
1"
74
S12
33601
15241
8" - 18"
2"
109
5 7/8
USC5D400
22400
10160
9" - 16"
1"
95
A
B 5 7/8 Average
S14
33601
15241
16" - 24"
2 1/2
129
Jaw Grip
MODEL WLL at 0 Vertical
Inside Shackle Crown Weight
Lbs
kg
Adjustment inch
to Spacer inch
Lbs
3 3/8
R1
6720
3048
STD AREA Rail
13
*
A
B
Average
B
C
A
& Crane Rail
R2
11200
5080
21
4 1/4 C
Average
WLL at 0 Vertical
Grip Adjustment
Jaw Aperture Inside
11200 Jaw
5080
Trolley Rail
4 1/4Shackle Crown33Weight
MODEL WLL at 0 Vertical Jaw Grip Adjustment Jaw Aperture Inside Shackle Crown Weight MODEL R1-59
MODEL

CLAMPS

B
A

Adjustable Double Ended Monorail Construction Clamps

Average
Weight
WLL at 0 Vertical Max. Pipe Wall
Lbs
kg
Thickness
Lbs
PH1
2240
1016
1"
13
PH2
4480
2032
1 1/8"
18
PH3
8960
4064
1 1/2"
33
PH4
13440
6096
1 7/8"
39
PH5
17920
8128
2 3/4"
57
Average
Max. Pipe Wall
Weight
MODEL WLL at 0 Vertical
Lbs
kg
Thickness
Lbs
PH1
2240
1" A
13
B
*1016
Average
PH2
4480
2032
1 1/8"
18
To
WLL
at
0
Vertical
Adjustment
inch.
MODEL 8960
PH3
4064
1 1/2"
33Accommodate Beam Weight
Lbs
kg
Flange
Thickness
(max)
inch
min-max
Lbs
PH4
13440
6096
1 7/8"
39
PH5
2 3/4"
57
USC3A 17920
6720 8128
3048
6" - 8"
1"
30
A1"
USC4
8960
4064
6" - 12"
52
USC5
11200
5080
6" - 12"
1"
63
USC5A
11200
5080
6" - 12"
1 1/2
63
B
A
*
Average
USC5D
22400 10160
6" - 12"
1"
74
at 0 Vertical
inch. To Accommodate
USC5D400WLL
10160Adjustment
9" - 16"
1" Beam Weight
95
MODEL
B22400
Lbs
kg
Flange Thickness (max) inch Lbs
min-max
USC3A
6720
3048
6" - 8"
1"
30
USC4
8960
4064
6" - 12"
1"
52
USC5
11200
5080
6" - 12"
B 1"
C63
A
Average
USC5A
- 12"
1 1/2 Inside Shackle
63 Crown Weight
Grip
Adjustment Jaw Aperture
WLL at 0 5080
Vertical Jaw 6"
MODEL 11200
USC5D
22400
10160
6"
12"
1"
74
inch min-max
Lbs
inch
Lbs
kg
to Spacer inch
USC5D400
22400
10160
9" - 16"
1"
95
7/8
1 1/2
4
PFC1
2240
1016
3 " - 7 1/2
6
7/8
1 1/2
PFC2
4480
6096
3 " - 7 1/2
7
7/8
1 1/2
PFC3 C 6720
8128
3 " - 7 1/2
MODEL

B
C
A
Average
WLL at 0 Vertical Jaw Grip Adjustment Jaw Aperture Inside Shackle Crown Weight
inch min-max
Lbs
inch
Lbs
kg
to Spacer inch
Jaw 3Adjustable
Girder
C
*
7/8B Clamps1 1/2
4
Average
PFC1
2240 Swivel
1016
"-7A
1/2
WLL at 0
Vertical Jaw3 Grip
MODEL 4480
Jaw7/8
Aperture Inside 1Shackle
6
1/2 Crown Weight
PFC2
6096
" - 7 Adjustment
1/2
to Spacer
inch
7Lbs
7/8
1 1/2 inch
PFC3
6720 Lbs
8128 kg design
3inch
" - 7min-max
1/2
One piece
adjustable
7/8
S1
4480
2032
3" - 7 1/2
9
3 3/4
Used
anchor point7/8
S2 for lifting,
6720 pulling
3048 or as
3" an
- 7 1/2
11
3 3/4
S2A
6720 of 3048
- 7 1/2
18
3 3/4
Added
benefit
horizontal3"jaw
adjustment 7/8
7/8
S3
8960
4064
6" - 10"
24
3 7/8
Full
of swivel jaw
onBAverage
flange
C4 1/8
7/8
S3X length/width
11200
5080
3"A- 7anchors
1/2
22
*
Average
WLL
at Jaw
0 Vertical
MODEL
S3A WLL
11200
5080
6"
-Max.
12" Pipe Wall
1Weight
5/8 Inside Shackle
33
atlifting
0 Vertical
Integrated
shackle
4
1/8
Grip
Adjustment
Crown
MODEL
Jaw
Aperture
Weight
Lbs
kg 8" - 18"
Thickness
Lbs
S4S
13440left/right
1 5/8
41
4 1/8
inch min-max
to Spacer
inch
Lbs
inch
Lbs
kg6096 threaded
Positive
grip
adjusting
bar
PH1
2240
1016 8" - 18" 1"
13
22400
10160
1 5/8
62
4 1/2
7/8
S1 S4A 4480
2032
3"
7
1/2
9
3
3/4
PH2
4480 from2032
S2For
at33601
up to3048
15
vertical
S12use6720
15241
8"
- 18" 1 1/8"
109
53/4
7/8
7/82"18
3"
7
1/2
11
3
PH3 for 15241
8960
406416"tie-off
33
S14 6720
33601
- 24"1 1/2"use*7/8
2 1/2
5 7/8
129
Approved
Personnel
S2A
3" - 7 1/2
18
3 3/4
PH4 3048
13440
6096
1 7/8"
7/8 39
6"
- 10" 2 3/4"
24
3 7/8
S3S5 not8960
approved
for side8128
load
PH5 4064
17920
57
7/8
S3X
11200
5080
3" - 7 1/2
22
4 1/8
S3A
11200
5080
6" - 12"
1 5/8
33
4 1/8
*
A
B
C
Average
S4S
13440
6096
8" - 18"
1 5/8
41
4 1/8
WLL at 0
Vertical Jaw8"Grip
Jaw
ApertureBInside 4Shackle
Crown Weight
MODEL 22400
S4A
10160
- 18"Adjustment
1 5/8
62
1/2Average
A
*
inch
min-max
to Spacer
inch
Lbs
S12
33601Lbs 15241kg
8"
- 18"
2"inch
109
5 7/8 Weight
To
Accommodate
Beam
WLL
at
0
Vertical
Adjustment
inch.
MODEL
S14 S5 33601
16" - 24" 12"
2 1/21"
5 7/8
129
6720 15241
3048
3 3/4 Lbs
22
Lbs
kg 3 1/2 -min-max
Flange Thickness (max) inch
S5A
6720
3048
3 1/2 - 12"
1"
4 1/2
31
USC3A
6720
1"
S6
11200
5080 30483 1/2 - 6"
12"- 8"
1"
4 1/2 30
31
USC4
8960
4064
6"
12"
1"
52
S6A
11200
5080
3 1/2 - 12"
1"
4 1/2
34
USC5
11200
5080
6"
12"
1"
63
*
A
B
C
S11
22400 10160
3 1/2 - 12"
1"
4 1/2
47
Average
USC5A
11200
5080
6"
12"
1
1/2
63
WLL
at
0
Vertical
Jaw Grip Adjustment Jaw Aperture Inside Shackle Crown Weight
MODEL
USC5D kg22400 10160
1" to Spacer inch74
inch min-max6" - 12"
inch
Lbs
Lbs
USC5D400 22400 10160
9" - 16"
1"
95
S5
6720
3048
3 1/2 - 12"
1"
3 3/4
22
S5A
6720
3048
3 1/2 - 12"
1"
4 1/2
31
S6
11200
5080
3 1/2 - 12"
1"
4 1/2
31

MODEL

Designed to enable speedy erection of overhead runways


Clamp ends are one piece, fully adjustable
B
A
Average
No tools required
Weight
WLL at 0 Vertical
Jaw Grip
Jaw Aperture
Max. Ht.
MODEL
Lbs
Lbs
kg
Adjustment
inch
inch
Adjustment
Positive grip left/right threaded adjustable bar
6720 for3048
3" - 7 adjustment
1/2
20
7/8
A -S7series allows
minor height
where
required
1 1/4 32
S7A
6720
3048
3" - 7 1/2
23
7/8
IdealS8for fast erection
of
permanent
or
temporary
overhead
runway
8960
4064
6" - 10"
41
7/8

1 1/4 32
8960
4064
6" - 10"
7/8
44
B
A
Average
Weight
WLL
at
0
Vertical
Jaw
Grip
Jaw
Aperture
Max.
Ht.
MODEL
Lbs D
Lbs
kg
Adjustment
inch
Adjustment
A
B inch
C
Av
MODEL
WLL
at 0 Vertical
Jaw3"Grip
S7
6720
3048
- 7 1/2 Jaw Aperture
20 Shackle W
7/8 Inside Shackle-Crown Inside
Adjustment
inch
inch
Lbs
kg
to
Spacer
inch
Width
inch
1 1/4 32
S7A
6720
3048
3" - 7 1/2
23
7/8
S15
44800
8"6"
- 18"
2" 7/8
8 1/8 4 9/16"
S8
8960 20320
4064
- 10"
41
S16
44800
16"6"- 24"
2 1/27/8
8 11/8
4 9/16"
1/4 32
S8A
8960 20320
4064
- 10"
44
S17
56000
25400
8" - 18"
2"
8 1/8
5 1/8"
S18
56000
25400
16" - 24"
2 1/2
8 1/8
5 1/8"
S19
67200
30480
8" A- 18"
2B
1/2
8 1/8
5 1/8"
C
D
A
S20
67200
30480
16" Grip
- 24"
3"
8 1/8 Crown Inside
5 1/8"
MODEL
WLL
at 0 Vertical
Jaw
Jaw A
Aperture
Inside Shackle
Shackle
Adjustment inch
inch
Lbs
kg
to Spacer inch
Width inch
S15
44800
20320
8" B
-A18"
2" B
8 1/8
4 9/16"
Average
S16
44800
20320
16" - 24"
2 1/2
8 1/8
4 9/16"
WLL at 0 Vertical
Jaw
MODEL
Inside
Weight
S17
56000
25400
8" - Grip
18"
2" Shackle Crown8 1/8
5 1/8"
Lbs
kg
Adjustment
Spacer inch 8 1/8Lbs
S18
56000
25400
16" - 24"inch
2to1/2
5 1/8"
R1
6720
3048
STD8"AREA
S19
67200
30480
- 18" Rail
2 1/23 3/8
8 1/813
5 1/8"
& 16"
Crane
Rail
S20
67200
- 24"
3" 4 1/4
8 1/821
5 1/8"
R2
11200 30480
5080
R1-59
11200
5080
33
Trolley Rail
4 1/4
S8A

A
B
Average
WLL at 0 Vertical
Jaw GripC
Inside Shackle Crown Weight
Adjustment inch
Lbs
kg
to Spacer inch
Lbs
B
C 13
D
3 3/8
R1
6720
3048
STDAAREA Rail
Av
Crane
R2
11200
5080
21
Inside Shackle Crown
Inside Shackle W
MODEL
WLL
at 0 Vertical
To&Fit
AngleRailJaw Aperture4 1/4
R1-59
11200
5080
33
Trolley Rail
Width inch
Lbs
Sections
inch 4 1/4 to Spacer inch
Dkg
AC1
1120
508
1 1/2 - 4
9/16
4"
2 3/4
AC2
2240 Fixed
1016 Adjustable
1 1/2 - 4
9/16 Dog
3 3/4
2 3/4
Girder
3 1/2
AC3
3360
1524
2"- 6"
7/8
2 7/8
AC4
6720
3048
4"- 8"
4"
4"
1"
B
C
D
A
One piece adjustable designA
MODEL WLL at 0 Vertical To Fit Angle Jaw Aperture Inside Shackle Crown Inside Shackle
Used for lifting,
pulling
or
as
an
anchor
point
A
to Spacer C
inch
Width inch
Sections
inch B
Lbs
kg
Average
B Shackle
A - 4to Fitof Inside
WLL
0 Vertical
Average
Enhanced
byatbalanced
side
plates Crown Inside
MODEL
Adjustable
Shackle Weight
AC1
1120
508 distribution
1 1/2
9/16
4"
2 3/4
Lbs
kg Outside
Weightinch
WLL
at 0 Vertical
Jaw
GripDiameter
Max. Ht. 3 Width
to Spacer inch
Lbs2 3/4
AC2
2240
1016
1 1/2
- 4 Jaw Aperture
9/16
3/4
MODEL
Maximum
grip,
hold
&
safety
Lbs
kg
inch
inch
Adjustment 2 7/8
P1
2240
1016 Adjustment
2 1/2
4 1/2
153 1/2
2Lbs
7/8
AC3
3360
1524
2"- -6"
7/8 3 7/8
No
required
S7P2tools 6720
3" -4"7 1/2
7/81" 3 7/8 3360 3048
1524
4"
-8"7
28 4"
AC4
6720
3048
4" 2207/8
P3
4480left/right
2032 threaded
- 9"adjusting
3 7/81 1/4 32
36
Positive
grip
2237/8
S7A
6720
3048
3" -5"
7 1/2
7/8 bar
6720
3048from 6"vertical
7"
- 11"
4"
58
3413/4
S8P4use at8960
- 10"
7/8
For
up to 4064
15
B 1 1/4 32
C
P5
6720 4064
3048
-A13
4"
69
Average
3443/4
S8A
8960
6" 8"
- 10"
7/8
MODEL
Approved
for
Personnel
tie-off
use*
WLL
at 0 Vertical
P6
6720
3048 Adjustable
9" - 15"to Fit Inside Shackle
4" Crown Inside
79
Shackle Weight
3 3/4
Lbs
kg Outside
P7
6720
3048
10" -Diameter
17"
4" inch
110
to Spacer
Width
Lbs
3 3/4inch
43 3/4
P8
8960
4064 2A1/2
12" -- 19"
D
140
425/8
Average
P1
2240
1016
4 1/2 B
7/8 C
15
7/8
MODEL
at 0 Vertical
Shackle Crown Inside
P9 WLL3360
8960
4064 Jaw Grip
16"
24"Jaw Aperture Inside
43 3/4
Weight
Shackle 169
425/8
P2
1524
4" - 7
7/8
28
7/8
inch
Lbs
Spacer inch
Lbs
P3
4480 kg2032Adjustment5"inch
- 9"
3to7/8
36
2Width
7/8inch
P4
6720 20320
3048 8" - 18"
7" - 11"
4" 8 1/8
58
S15
44800
2"
9/16"
144
3 43/4
P5
6720 20320
3048 16" - 8"
4" 8 1/8
69
S16
44800
24"- 13 2 1/2
9/16"
170
3 43/4
P6
6720 25400
3048 8" - 18"
9" - 15"
4" 8 1/8
79
S17
56000
2"
5 1/8"
166
3 3/4
P7
6720 25400
3048 16" -10"
4" 8 1/8
110
S18
56000
24" - 17" 2 1/2
5 1/8"
198
3 3/4
4 3/48 1/8
S19
67200
18" - 19" 2 1/2
5 1/8"
203
P8
8960 30480
4064 8" - 12"
140
4 5/8
S20
67200
24" - 24"
3"
5 1/8"
236
P9
8960 30480
4064 16" -16"
4 3/48 1/8
169
4 5/8
MODEL

MODEL

A
B
Average
WLL at 0 Vertical
Jaw Grip
Inside Shackle Crown Weight
Lbs
kg Adjustment inch
to Spacer inch
Lbs
3 3/8

CLAMPS

MODEL
S7
S7A
S8
S8A

WLL at 0 Vertical
Lbs
kg
6720
3048
6720
3048
8960
4064
A
8960
4064

A
Jaw Grip
Adjustment inch
3" - 7 1/2
3" - 7 1/2
6" - 10"
6" - 10"

B
Jaw Aperture
Max. Ht.
inch
Adjustment
7/8
1 1/4 32
7/8
7/8
1 1/4 32
7/8

Adjustable Universal Rail Lifting Clamps


A

B
A
MODEL WLL at 0 Vertical Width Adjustment To Accommodate Beam Insi
Lbs
kg
inch min-max Flange Thickness (max) inch W
B1
6720
3048
3"- 8"
1 1/8
B2
13440
6096
4"- 12"
1 1/4
B3
22400
10160
4"- 12"
1 1/2

Average
Weight
Lbs
20
23
41
44

Average

WLL
0 Vertical
Jaw GripAREAJaw
Aperture
Inside
Shackle Crown Inside Shackle Weight
MODEL
Designed
to atgrip
onkgall standard
Rail
& Crane
Rail
Adjustment inch
inch
Lbs
to Spacer inch
Lbs
Width inch
Positive
grip
through
left/right
threaded
adjustable
bar
S15
44800
20320
8" - 18"
2"
8 1/8
4 9/16"
144
S16
44800
20320 adjustability
16" - 24"
2 1/2
8 1/8
4 9/16"
170
Lightweight
& versatile
S17tools 56000
25400
8" - 18"
2"
8 1/8
5 1/8"
166
No
required
S18
56000
25400
16" - 24"
2 1/2
8 1/8
5 1/8"
198
Integrated
lifting shackle
S19
67200
30480
8" - 18"
2 1/2
8 1/8
5 1/8"
203
S20
67200
30480
16"
24"
3"
8
1/8
5
1/8"
236
Ideal for construction, erection and maintenance
MODEL

rage
eight
bs
4
6
7

rage
eight
bs
9
11
18
24
22
33
41
62
09
29

rage
eight
bs
22
31
31
verage
34
Weight
47Lbs
4
6
7

verage
Weight
Lbs
9
11
18
24
22
33

MODEL
R1

R2

PH1
R1-59
PH2
PH3
PH4
PH5

4064
6096
8128

1 1/2"
1 7/8"
2 3/4"

A
B
To Accommodate In
WLL at 0 Vertical Width Adjustment
Beam Flange
inch min-max Thickness (max) inch.
Lbs
kg
B
A
Average
3048
1 1/8
Weight
Jaw6720
Grip
Jaw Aperture 3"- 8"
Max. Ht.
13440inch 6096 inch 4" -Adjustment
12"
Lbs1 1/4
Adjustment
6"- 12" 3"22400
- 7 1/2 10160 7/8
201 1/2
8"- 18"
1 1/4 32
3"33600
- 7 1/2 15240 7/8
23 3"
20320 7/8
8"- 18" 6"44800
- 10"
41 3"

MODEL

A
B
Average
WLL at 0 Vertical
Jaw Grip
Inside Shackle Crown Weight
Adjustment inch Average
Lbs
kg
to Spacer inch
Lbs
WallRail Weight 3 3/8
WLL
at 0 Vertical
6720
3048 Max.
STDPipe
AREA
13
Lbs
kg
Thickness
Lbs
& Crane Rail
11200
5080
21
4 1/4
2240
1" Rail
13
11200 1016
5080
33
Trolley
4 1/4
4480
2032
1 1/8"
18
8960
13440
17920

A
B
C
To Accommodate
Flange Width
To Accomm
MODEL WLL at 0 Vertical Adjustment inch Beam Web Thickness Beam Flange
Lbs
kg
(max) inch.
min-max
(max) in
A1
6720
3048
3"- 8"
5/8
1"
1 1/
A2
13440
6096
4"- 12"
3/4
A3
22400
10160
4"- 12"
3/4
1 1/

MODEL
S7
S7A
S8
S8A

33
39
57

GBT1
WLL at 0 Vertical
GBT2
Lbs
kg
GBT3
6720
3048
GBT4
6720
3048
GBT5
8960
4064
8960
4064

6" - 10"

7/8

MODEL
P1

MODEL
P2
MODEL
P3
S15
P4
S16
PFC1
P5
S17
PFC2
P6
S18
PFC3
P7
S19
S20
P8

P9

11200 3048
5080
6720
22400 4064
10160
8960
22400
10160
8960
4064

- 12"
3" - 76"1/2
6" - 6"
10"- 12"
9" - 16"
6" - 10"A

7/8
7/8
7/8

1 11/2
1/4 32
1" B 1"
1 1/4 32

23 63
41 74
95
44 C

Average
WLL at 0 Vertical Adjustable to Fit Inside Shackle Crown Inside Shackle Weight
Lbs
kg Outside Diameter
to Spacer inch
Width inch
Lbs
A
C
D
Average
15
2240
1016
2 1/2 - 4 1/2B
3 7/8
2 7/8
WLL at 0 Vertical
Jaw Grip A Jaw Aperture Inside
Shackle
Crown
Weight
Inside
B3 7/8
C 2 Shackle
Average
3360 kg 1524
4"
- 7 inch
28
7/8
Adjustment
inch
Lbs
to
Spacer
inch
Lbs
Width
inch
C
Jaw Aperture
WLL
at 0 Vertical
4480
2032 Jaw Grip
5" Adjustment
- 9"
3 7/8 Inside Shackle2 Crown
7/8 Weight36
Lbs
inch 8 1/8 to Spacer4 inch
44800
20320
8" inch
- 18" min-max 2"
9/16"
144
Lbs
kg
6720 203203048 16" - 24"
7" - 11" 2 1/2
4"8 1/8
58
3/4
44800
439/16"
7/8 4"
1 1/2
4170 69
2240
1016
38"" -- 713
1/2
6720 25400
3048 8" - 18"
3/4
56000
2"
8 1/8
531/8"
166
6
7/8 4"
4480
6096
39"" -- 715"
1/22 1/2
6720 25400
3048 16" - 24"
3/4
56000
8 1/8 D 1 1/2
531/8"
198 79
7 110
7/8 4"
1 1/2
6720
8128
3 " --717"
1/22 1/2
6720 30480
3048 8" - 18"
10"
3/4
67200
8 1/8
531/8"
203
4Clamp
3/4
67200
30480
3"
8 1/8
541/8"
236140
8960 Adjustable
4064 16" - 24"
12"
- 19" Section
5/8
Angle
8960
4064
16" - 24"
4 3/4
169
4 5/8

A
B
Average
One-piece
adjustable
design
to fit all standard
sections
B angle
C
*
Average
Jaw Grip A Inside Shackle Crown
MODEL WLL at 0 Vertical
Weight
WLL
0 Vertical
Gripinch
Adjustment
Inside Shackle Crown Weight
Jaw inch
Aperture Lbs
MODEL
Serves as
anat anchor
orJaw
lighting
pointto Spacer
Adjustment
Lbs
kg
inch min-max
to Spacer inch
inch
Lbs
Lbs
kg
3/8
R1
6720
3048jawSTD
AREA Rail
V-block
clamping
secures
clamp to3angle
profile13
S1
4480 5080
2032 & Crane3"Rail
- 7 1/2
9
3 3/4
R2
11200
21
4 1/4 7/8
S2
6720 for5080
3048 Trolleysafety
3"Rail
- 7 1/2
11
Positive
grip
maximum
3 3/4
R1-59
11200
33
4 1/4 7/8
7/8
S2A
6720
1/2
18
3 3/4
Integrated
lifting 3048
shackle 3"6"- -710"
7/8
S3
8960
4064
24
3 7/8
7/8
S3X tools11200
3" - 7 1/2
22
4 1/8
No
required5080

S3A
11200
5080
6" - 12"
1 5/8
33
4 1/8
S4S
13440
6096
8" - 18"
1 5/8
41
4 1/8
A 8" - 18" B
Average
S4A
22400
10160
1 5/8 C
62
4 1/2 D
MODEL
at 0 Vertical
S12 WLL
33601
15241To Fit Angle
8" - Jaw
18" Aperture Inside
2" Shackle Crown 5Inside
109
7/8 Shackle Weight
to Spacer inch
Width inch 129
Lbs
Lbs
S14
33601 kg15241 Sections16" - 24" inch
2 1/2
5 7/8
AC1
1120
508
1 1/2 - 4
9/16
4"
2 3/4
10
AC2
2240
1016
1 1/2 - 4
9/16
3 3/4
2 3/4
10
3 1/2
AC3
3360
1524
2"- 6"
7/8
2 7/8
24
*
A
B
C
Average
AC4
6720
3048
4"- 8"
4"
4"
47
1"
WLL
at
0
Vertical
Jaw
Grip
Adjustment
Jaw
Aperture
Inside
Shackle
Crown
Weight
MODEL
inch min-max
inch
to Spacer inch
Lbs
kg
Lbs
A 3 1/2 - 12" B
C
S5
6720
3048
1"
3Average
3/4
22
at 0 Vertical
MODEL
Fit -Inside
Weight
S5A WLL6720
3048Adjustable 3to1/2
12" Shackle Crown
1" Inside Shackle4 1/2
31
Lbs
kg
Outside
Diameter
to
Spacer
inch
Width
inch
Lbs
S6
11200
5080
3 1/2 - 12"
1"
4 1/2
31
P1
2240
15
S6A
11200 101650802 1/2 - 4 31/2
1/2 - 12" 3 7/8
1"
4 1/2
34
2 7/8

44

BD
AC C
A
B
Avera
Accommodate
In
WLL at 0 Vertical
Jaw Grip
Jaw Aperture Inside Shackle CrownToInside
Shackle Weig
WLLinch
at 0 Vertical
Adjustment
Beam
Adjustment
inch Width to
Lbs
kgMODEL
Spacer inch
Lb
WidthFlange
inch
inch min-max
Lbs
kg2"
Thickness
(max) inch.144
44800
20320
8" - 18"
8 1/8
4 9/16"
B
44800
20320
24"
2 1/2
4 9/16"
170
BA1 A16" - 2240
1016
2 1/28- 1/8
8
1"
B
C
Average
56000
25400
8" - 18"
2"
8 1/8
5 1"
1/8"
166
BA2
3360To Accommodate
1524
3"8"
WLL
at
0
Vertical
Width
Adjustment
Weight
Beam
Inside
Shackle
56000
25400
24"
2 1/2
8 1/8
5 1/8"
198
BA3 16" - 4480
2032
3"- 8"
Lbs
kg
Lbs 5 1"
67200
30480 inch min-max
8" - 18" Flange Thickness
2 1/2(max) inch Width
8 1/8inch
1/8"
203
3/4
52 5 1/8"
6720
3"-16"
8" - 24"
1 3"
1/8
67200 3048
30480
8 41/8
236
110
B2
13440
6096
4"- 12"
1 1/4
3 7/8
A 5 1/8
Average
164
B3
22400
10160
4"- 12"
1 1/2
A at 0 Vertical B
Weight
WLL
A
Plate
Thickness
Average
MODEL Jaw Grip
MODEL WLL at 0 Vertical
Inside
Crown
Weight Lbs
Inch
min-max
Lbs
kg Shackle
inch 1016
Lbs
kgPLC1Adjustment
to Spacer inch
2239.89
0 - 3/4 Lbs
7
D
A AREA
R1
6720
3048PLC2STD
Rail B2032 3 3/8 0 - 1C 1/4 13
4479.79
14
To
Accommodate
Flange
Width
Inside
Shackle Average
To
Accommodate
Rail
R2
11200
5080PLC3 & Crane
6719.68
3048 4 1/4 0 - 1 1/4 21
20
MODEL WLL
at 0 Vertical
Beam Web Thickness
Adjustment
inchRail
Crown to
Beam Flange Thickness
Weight
R1-59
11200
5080PLC4
33
Trolley
4 1/4
8959.58
4064
0
1
1/4
28
Lbs
kg
(max) inch.
min-max
Spacer inch
(max) inch.
Lbs
A
5 1/4
A1
6720
3048
3"- 8"
5/8
1"
46
A2
13440
6096
4"- 12"
3/4
73
A 1 1/4
B5 5/8
C
A3
22400 10160
4"- 12"
3/4 Jaw Adjustability
1 1/4 Inside Shackle
5 1/2 Crown 105
Pipe
Lifting
Clamps
WLL
at 0 Vertical
Inside Sh
MODEL
ALbs
B
C
D
Averai
kg
to Spacer inch
inch min-max
Width
Jaw ApertureB Inside ShackleCCrown Inside Shackle Weig
MODEL WLL at 0 Vertical To Fit Angle
A
3360
1524
0 - 1 1/2
3 1/2
2Lbs
1/
One-pieceLbsadjustable
design
to
Spacer
inch
Width
inch
Sections
inch
kgHPC-1
To Accommodate
Shackle3 Average
HPC-2 Width
4480
2032
0 - 2" Inside
1/2 2 3/4
2 10
1/
MODEL 1120
WLLpositive
at 0 508
Vertical
Adjustment
Beam Flange
AC1
1 1/2
- 4
9/16
4"Crown to
Weight
Lightweight,
grip
construction
HPC-3
3048
0 - inch.
3" 3 Spacer
310
3/
min-max
kg
Thickness
AC2
2240Lbs 1016
1 inch
1/26720
- 4
9/16 (max)
3/4 inch 5 1/4
Lbs2 3/4
HPC-4
4064
5 1/4
324
3/
Designed
for
lifting
pipes and
AC3
1524
2"-8960
6"
7/8 objects
GBT1 3360
6720
3048
3"-cylindrical
8"
1 1/80 - 4" 2 7/8 4"
683 1/2
AC4
4"-4"8"- 12"
4" 4"
47
1" 1 1/4
GBT2 6720
13440 3048
6096
127 4"
Integrated
lifting
shackles
1 1/2
GBT3
22400 10160
6"- 12"
5 1/8
183
GBT4
33600 15240
8"
354
A8"- 18"
B3"
C
Average
GBT5
44800 20320
8"- 18"
3"
8 3/4"
440
MODEL WLL at 0 Vertical Adjustable to Fit Inside Shackle Crown Inside Shackle Weight
Lbs
kg Outside Diameter
to Spacer inch
Width inch
Lbs
P1
2240
1016
2 1/2 - 4 1/2
3 7/8
15
2 C7/8
B
A
P2
3360
1524
4" - 7
3 7/8
28
2 7/8
To Accommodate
Average
Inside2 Shackle
P3
4480
2032
5" - 9"
3 7/8
36
7/8
MODEL WLL at 0 Vertical Width Adjustment
Beam Flange
Weight
Crown to
P4
6720Lbs 3048
7"
3 3/4
inch- 11"
min-max Thickness4"(max) inch. Spacer
kg
Lbs58
inch
P5
6720
3048
8" - 13
4"
69
3 3/4
1016
1"
1479
P6BA1 67202240 3048
9"2-1/2
15"- 8
4"
3 4"
3/4
1524
8"
1"
15110
P7BA2 67203360 3048
10" -3"17"
4"
3 4"
3/4
2032
8"
1"
15140
4 3/4
P8BA3 89604480 4064
12" -3"19"
4 4"
5/8
P9
8960
4064
16" - 24"
4 3/4
169
4 5/8

A
B
C
D
MODEL
Average
Crown Inside Shackle Weight
MODEL WLL at 0
* Vertical To FitAAngle Jaw ApertureB Inside Shackle
Average
to
Spacer
inch
Width
inch
Sections
inch
Lbs
kg
Lbs
S15
WLL at 0 Vertical Adjustment inch. To Accommodate Beam Weight
MODEL
S16
AC1
1120
508
1Amin-max
1/2 - 4
4" Lbs
2 3/4
10
Lbs
kg
Flange
Thickness (max) inchAverage
B9/16
S17
AC2 WLL
2240
1016 Jaw
1 1/2
- 4 Jaw Aperture
9/16 1"
3/430
2 3/4
10
MODEL
at 0 Vertical
Grip
Max. Ht. 3Weight
USC3A
6720
3048
6" - 8"
S18
MODEL
B
3 1/2
AC3
3360
1524 Adjustment
2"--inch
6"
2 7/8
24
Lbs 52
Lbs
kg4064
inch7/8 Adjustment
USC4
8960
6"
12"
1"
S19
AC4
6720 3048
3048 3" - 76"
4"4"20 63
4"
47
USC5
11200
5080
- 8"
12"
1" B1
S7
6720
1/2
7/8 1"
S20

USC5A
S7A
USC5D
S8
USC5D400
S8A

1 1/4 32

MODEL
PLC1
PLC2

A
WLL at 0 Vertical A Plate Thickness
Inch min-max
Lbs
kg
2239.89 1016
0 - 3/4
4479.79 2032
0 - 1 1/4

Average
Weight
Lbs
7
14

TROLLEYS
a

MODEL
S7
S7A
S8
S8A

MODEL
S15
S16
S17
S18
S19
S20

MODEL
R1
R2
R1-59

C
B
C
A
Geared
Runway
Beam
Trolleys
with Anti-Drop
PlatesAverage
MODEL
WLL at 0
Vertical Width
Adjustment
Weight
To Accommodate
Beam Inside Shackle
Lbs
kg
inch min-max Flange Thickness (max) inch Width inch
Lbs
4 3/4
52
B1
6720
3048
3"- 8"
1 1/8
One-piece
adjustable
design
110
B2
13440
6096
4"- 12"
1 1/4
3 7/8
164
Hand
geared
for
easy movement
of heavy1 1/2
loads
B3
22400
10160
4"- 12"
5 1/8

B
A
Average
Weight
WLL at 0 Vertical Adjustable
Jaw Grip Runway
Jaw Aperture
Max.
Ht.
Beam
Trolleys
Lbs
Lbs
kg
Adjustment inch
inch
Adjustment
6720
3048
3" - 7 1/2
20
7/8
1 1/4 32
6720
3048adjustable
3" - 7 design
1/2
23
7/8
One-piece
8960 push,
4064 easy to
6" use,
- 10" ball bearing
41
7/8 wheels Hand
1 1/4 32
8960
4064
6" - 10"
7/8
44

Ball bearing wheel movement


Integrated lifting shackle
D
A
B
C
Adapts to beam widthFlange
by turning
hand threaded
adjustingInside
screw
To Accommodate
Width left/right
Shackle
To Accommodate
MODEL
WLL
at
0
Vertical
Beam
Web
Thickness
Adjustment
inch
Crown
Beam
Flange
Thickness
Includes locking collar and wheel guard anti-drop plates for maximum safety to
Lbs
kg
(max) inch.
min-max
Spacer inch
(max) inch.
Ideal
for
temporary
and3"-permanent
installations
requiring
speedy 5 1/4
A1
6720
3048
8"
5/8
1"
installations
use 4"- 12"
1 1/4
A2
13440 and
6096
3/4
5 5/8
A3
22400 for
10160
4"- 12" tie-off use*
3/4
1 1/4
5 1/2
Approval
personnel

Adapts to beam width by turning left/right hand threaded adjusting screw


Includes locking collar
and wheel
plates for
A
B guard anti-drop
C
D
Average
WLL
at 0 Vertical
maximum
safetyJaw Grip Jaw Aperture Inside Shackle Crown Inside Shackle Weight
Adjustment inch
inch
Lbs
kg
to Spacer inch
Lbs
Width inch
44800
Integrated
lifting 8"shackle
20320
- 18"
2"
8 1/8
4 9/16"
144
44800
20320
16"
24"
2
1/2
8
1/8
4
9/16"
170
No tools required
56000
25400
8" - 18"
2"
8 1/8
5 1/8"
166
56000
Ideal for
temporary
and permanent
speedy 198
25400
16" - 24"
2 1/2 installations
8 1/8 requiring
5 1/8"
67200
30480and use
8" - 18"
2 1/2
8 1/8
5 1/8"
203
installation
67200
30480
16" - 24"
3"
8 1/8
5 1/8"
236
Approval for personnel tie-off use*

MODEL

A
B
B Average
C
A
Average
WLL
at 0WLL
Vertical
Jaw Grip
Inside Shackle
Crown Weight
MODEL
at 0 Vertical
Width Adjustment
To Accommodate
Beam Inside Shackle Weight
Adjustment
inchmin-max
Lbs
kg
to Spacer
inch
Lbs inch Width inch
Lbs
kg
inch
Lbs
Flange
Thickness (max)
3 3/8
6720
3048
STD
4 3/4
52
B1
6720
3048AREA Rail3"- 8"
1 1/8 13
&
Crane Rail 4"- 12"
11200
5080
4 1/4
110
B2
13440
6096
1 1/4 21
3 7/8
11200
5080
Trolley Rail 4"- 12"
4 1/4
164
B3
22400
10160
1 1/2 33
5 1/8

GBT1
GBT2
GBT3
GBT4
GBT5

WLL at 0 Vertical
Lbs
kg
6720
3048
13440
6096
22400
10160
33600
15240
44800
20320

Averag
Weigh
Lbs
46
73
105

A
B
C
To Accommodate Inside Shackle Average
Width Adjustment
Beam Flange
Crown to
Weight
inch min-max Thickness (max) inch. Spacer inch
Lbs
3"- 8"
1 1/8
4"
68
4" - 12"
1 1/4
4"
127
1 1/2
6"- 12"
5 1/8
183
8"- 18"
3"
8"
354
8"- 18"
3"
8 3/4"
440

B
C
A
D
A
B
C
A
To Accommodate Inside Shackle Average
A Flange Width
B
C
D
To Accommodate
Inside
Shackle Average
To Accommodate
Average
A
MODEL
WLL
at
0
Vertical
Width
Adjustment
Beam
Flange
Weight
Crown
to
MODEL
WLL at 0 Vertical
Web Thickness
Adjustment
inch Beam Inside
Crown to
Beam Flange
Thickness
Weight
Shackle Crown
Inside
Shackle Weight
MODEL WLL
at 0 Vertical
To Fit Angle
Jaw Aperture
inch min-max Thickness (max) inch. Spacer inch
Lbs
kg
Lbs
Lbs
kg
(max)toinch.
min-max
inch. inch Spacer
Lbs
Spacer inch (max)Width
Sections
inch
Lbs
kg
Lbs inch
BA1
2240
1016
2 1/2 - 8
1"
4"
14
5 1/4
A1
6720
3048
5/8 4"
1" 2 3/4
46
AC1
1120
508
1 1/2 - 4 3"- 8"9/16
10
BA2
3360
1524
3"- 8"
1"
4"
15
1 1/4
AC2
2240
1016
1 1/2 - 4 4"- 12"
9/16
2 3/4
10
A2
13440
6096
3/4 3 3/4
5 5/8
73
BA3
4480
2032
15
B 1"
C 4"
A 3"- 8"
3 1/2
AC3
3360
1524
2"- 6" A 4"- 12"7/8
24
B 3/4 2 7/8
Average
A3
22400
10160
1 1/4
5 1/2
105
Average
MODEL WLL at 0 VerticalBWidth Adjustment To Accommodate Beam Inside Shackle Weight
AC4
6720
4"-Jaw
8" Grip
4"
47
1"Jaw Aperture
Weight4"
WLL at 03048
Vertical
Max. Ht.
MODEL
Lbs
kg
inch min-max Flange Thickness (max) inch Width inch
Lbs
Lbs
Lbs
kg
Adjustment inch
inch
Adjustment
A
B
C
C 3" - 7 1/2
Average
4 3/4
52
B1
6720
3048
3"- 8" A
1 1/8
S7
6720
3048
-C
20
To Accommodate
Inside Shackle Average
A
B7/8
Weight
WLL
at
0
Vertical
A
Plate
Thickness
Average
B
110
B2
13440
6096
4"- 12"
1 1/4
3 7/8
1 1/4 32
MODEL
S7A WLL
6720
3048
3" - to
7 1/2
23 Crown to
7/8 Crown Beam
MODEL
WLL at
0 Vertical
Adjustment
Weight
Lbs
at 0 Vertical
Inch min-max
Lbs
kg
MODEL
Adjustable
FitWidth
Inside
Shackle
InsideFlange
Shackle Weight
164
B3
22400
10160
4"- 12"
1 1/2
5 1/8
Lbs
kg - 10" inchtomin-max
(max)
Spacer inch
Lbs
S8
8960
4064
6"
- inchinch. 41
7/8inchThickness
Lbs
kg
Outside Diameter
Spacer
Width
Lbs
PLC1
2239.89 1016
0 - 3/4
7
1 11/4
32
S8A
8960 1016
4064
10"
7/8
4415 4"
GBT1
67202 1/23048
3"- 38"7/8
68
PLC2
4479.79 2032
0 - 1 1/4
14
P1
2240
-6"4 -1/2
21/8
7/8
GBT2 152413440 4" 6096
4" - 12"
1 21/4
127
PLC3
6719.68 3048
0 - 1 1/4
20
P2
3360
- 7
3 7/8
28 4"
7/8
1 1/2
GBT3 203222400 5" 10160
6"- 12"
183
PLC4
8959.58 4064
C B 28
P3
4480
-A
9"
36D5 1/8 Average
D
A 0 - 1 1/4
C
B3 7/8
C 2 7/8
GBT4 304833600 7" 15240
8"- 18"4"
354
D8"
P4
6720
- 11"
58 Shackle
33"3/4
To Accommodate
Flange Width
Inside Shackle Averag
To Accommodate
MODEL
WLL
at 0 Vertical
Grip
Jaw8"-Aperture
Inside Shackle
Crown Inside
GBT5
44800 8"Jaw
18"
8 3/4" Weight
440
P5
6720
3048
-20320
13 inch
69
33"3/4
MODEL
WLL
at
0
Vertical
Beam
Web
Thickness
Adjustment
inch
Crown
to
Beam
Flange
Thickness
Weigh
Adjustment
inch 4"
Lbs
kg
to Spacer
inch
Lbs
Width inch
A
B
C
P6
6720
3048
9" - 15"
4"
79
3 3/4
Lbsat 0 Vertical
kg
(max) inch.
min-max
Spacer inch
(max) inch. Average
Lbs
S15
44800
20320
18"
2" 4"
8 1/8
4
9/16"
144
WLL
Inside
Shackle
Crown
Jaw
Adjustability
Inside
Shackle
Weight
MODEL
P7
6720
3048
10"8"- -17"
110
3 3/4
A1
6720
3048
8"
5/8 with
46
S16
44800
20320
16"- 19"
- 24"
2 1/2
8 1/8
4 9/16"
170
Lbs Runway
kg
Adjustable
Beam
Trolleys
to Spacer
inch Anti-Drop
inch3"min-max
Width1"inch Plates
Lbs 5 1/4
4 3/4
P8
8960
4064
12"
140
4
5/8
B
C
A
1/4
S17
56000
25400 Runway
8" - 18" Beam 2"
8 1/8 Anti-Drop
5 1/8"
166
A2
13440
4"3/4
73
HPC-1
3360 6096
1524
0 - 112"
1/2
3 1/2
211/2
13 5 5/8
Autolock
Trolleys
with
Plates
P9
8960
4064
16"
24"
4
3/4
169
To
Accommodate
Average
Inside
Shackle
4
5/8
ge
S18
56000
25400
16" - 24"
2 1/2
8 1/8
5 1/8"
198
A3
22400
4"-0 12"
3/4
1/4
105
HPC-2
4480 10160
2032
- 2"
3 1/2
211/2
15 5 1/2
MODEL 30480
WLL at 0 Vertical
Beam
Weight
ht
S19
67200
8" - 18" Width Adjustment
2 1/2
8 1/8Flange
5 Crown
1/8" to 203
HPC-3
Lightweight
push, easy
wheels
1/4
6720 hand
3048
0 - 3" to use, ball5 bearing
3 3/8
32
Lbs
Thickness
S20
67200
30480
16"kg
- 24" inch min-max
3"
8 1/8(max) inch. Spacer
5 1/8" inch 236Lbs
8960for lighter
4064 industrial
0 - 4" A applications
5 1/4 B
3 3/8 C 45
One-piece
versatile
beam width
HPC-4
Developed
BA1
2240
1016
2 1/2 - design
8
1"
4"
14
To Accommodate Inside Shackle Average
BA2
3360
1524
3"- 8"
1"pivot opening4"of clamp 15
Maximum
speed of
application
through
central

Adapts
to
beam
width
by
turning
left
and
right
hand
adjusting
bar Weight
MODEL
WLL at 0 Vertical Width Adjustment
Beam Flange
Crown to
C
A A
BA3
4480
2032
3"- 8" B B
1"
4"
15
Average
Average
inchlocking
min-max mechanism
kg
Thickness (max) inch. Spacer inch
Lbs
Snap
lock
when
trolley
is ToShackle
closed
around
flange
Fitted with Lbs
width adjustment
at 0safety
VerticalJaw
Width
WLL
at 0WLL
Vertical
GripAdjustment
Accommodate
Beam
Inside Shackle Weight
MODEL MODEL
Inside
Crown
Weight
Lbskg easy
kg to use
inch inch
min-max
Adjustment
Lbs
Lbs
Thickness
GBT1 guard
6720anti-drop
3048 plates3"- 8"
1 1/8
4"
68
toFlange
Spacer
inch (max) inch
Lbs Width inch
Hand
push
ball bearing
wheels

Wheel
GBT2
13440
6096
4" - 12"
1 1/4
4"
127
A 3 3/8 1 1/8
4 3/4
52
Average 13
B1
6720
R1
6720
3048 3048
STD AREA 3"Rail8"

Wheel
guard
anti-drop
plates,
and
integrated
lifting
shackle
1
1/2

No
additional
width
adjusting
tools
required
GBT3
22400
10160
6"12"
5
1/8
183
Weight
110
WLL at6096
0
VerticalRail
Plate Thickness
B2
13440
4"-A12"
3 7/8
& Crane
R2
11200
5080
21
4 1/4 1 1/4
MODEL
GBT4
33600
15240
8"- 18"
3"
8"
354
Inch min-max
Lbs10160
kg Rail
164
B3
22400
4"- radius
12"
5 1/8
Ideal
for
use
onTrolley
uneven
runways
R1-59 11200
5080
4 1/4 1 1/2Lbs 33
Positive
grip
clamps
GBT5
44800
20320
8"- 18"
3"
8 3/4"
440
PLC1
2239.89 1016
0 - 3/4
7
Approval
for
personnel
tie-off
use*
Approval for personnel tie-off use*
PLC2
4479.79 2032
0 - 1 1/4
14
PLC3
6719.68 3048
0 - 1 1/4
20
PLC4
8959.58
4064
0
1
1/4
28
D
A
B
C
B
C
A
age
Inside Shackle
Average
To Accommodate Inside Shackle Average
ght
A Flange Width B To Accommodate C To Accommodate D
Average
MODEL WLL at 0 Vertical Adjustment inch Beam Web Thickness
Crown
to
Beam
Flange
Thickness
Weight
MODEL
WLL
at
0
Vertical
Width
Adjustment
Beam
Flange
s MODEL WLL
Weight
Crown
to
Inside Shackle Crown Inside
Shackle
at 0 Vertical
To
Jaw
Weight
A Aperture
Average
Lbs
kg Fit Angle
(max) inch.toBSpacer inch
inchLbs Lbs
(max) inch. C
inch min-max Thickness (max) inch. Spacer inch
Lbs
kg
Lbs
4
WidthSpacer
inchWeight
Lbs
kg at 0 Vertical
Sectionsmin-max
inch
WLL
Inside
Shackle
Crown
Jaw
Adjustability
Inside
Shackle
MODEL
5 1/4
A1
6720
3048
3"- 8" 9/16
5/8
1"
0
BA1
2240
1016
2 1/2 - 8
1"
4"
14
AC1
1120
508
1 1/2
2 3/4 Lbs 10 46
Lbs
kg - 4 inch min-max
to Spacer 4"
inch
Width
inch
6
BA2
3360
1524
3"- 8"
1"
4"
15
A2
13440
6096
3/4
AC2
2240
1016
1 1524
1/2 - 44"- 12"
9/16
3 3/4 1 1/4 2 1/2
2 3/4 5 5/8
10 73
HPC-1
3360
0
1
1/2
3
1/2
13
8
BA3
4480
2032
3"- 8"
1"
4"
15
A3
22400 101602"- 6" 4"- 12" 7/8
3/4
105
3 1/2 5 1/2
AC3
3360
2 7/8 1 1/4 2 1/2
HPC-2 1524
4480
2032
0 - 2"
3 1/2
15 24
3
AC4
6720
4"- 8"
5 1/44"
HPC-3 3048
6720
3048
0 - 3"1"
3 3/8 4"
32 47
6
B
C
HPC-4
8960
4064
0 - A4"
5 1/4
3 3/8
45
A
Average
To Accommodate Inside Shackle Average
A
B
C
WLL at 0 Vertical A Plate Thickness Weight
Average
MODEL WLL at 0 Vertical Width Adjustment
Beam Flange
Crown to
Weight
MODEL
Lbs
Inch min-max
Lbs
kg
MODEL WLL at 0 Vertical
Shackle
Crown (max)
Insideinch.
Shackle
Weight
inch Inside
min-max
Lbs Adjustable
kg to Fit
Thickness
Spacer
inch
Lbs
Lbs
kg Outside Diameter
to Spacer inch
Width inch
Lbs
PLC1
2239.89 1016
0 - 3/4
7

ge
ht

PLATE CLAMPS

WLL at 0 Vertical
Lbs
kg
6720
3048
6720
3048
8960
4064
8960
4064

A
Jaw Grip
Adjustment inch
3" - 7 1/2
3" - 7 1/2
6" - 10"
6" - 10"

B
Jaw Aperture
Max. Ht.
inch
Adjustment
7/8
1 1/4 32
7/8
7/8
1 1/4 32
7/8

Average
Weight
Lbs
20
23
41
44

B
C
A
Average
MODEL WLL at 0 Vertical Width Adjustment To Accommodate Beam Inside Shackle Weight
Lbs
kg
inch min-max Flange Thickness (max) inch Width inch
Lbs
4 3/4
52
B1
6720
3048
3"- 8"
1 1/8
110
B2
13440
6096
4"- 12"
1 1/4
3 7/8
164
B3
22400
10160
4"- 12"
1 1/2
5 1/8

A
B D
A
Average
D
A
B
C
A
B
C
Average C
MODEL WLL
0 Vertical
Width Adjustment
Accommodate
Beam Weight
Inside Shackle Weight
To Accommodate
Flange Width
To Accommodate Inside Shackl
L WLL at 0 Vertical
JawatGrip
Jaw Aperture
Inside ShackleToCrown
Inside Shackle
Lbs inchkg inchinch min-max
Lbs WLL at 0 Vertical Adjustment inch Beam Web Thickness Beam Flange Thickness Crown to
MODEL
Width inch
Adjustment
Lbs
kg
to SpacerFlange
inch Thickness
Width(max)
inchinch Lbs
Lbs
kg
(max) inch.
min-max
Spacer inch
(max) inch.
52
B1
6720
3"- 8" 8 1/8
1 1/8
44800
20320
8" - 18" 3048 2"
4 9/16"
144 4 3/4
5 1/4
110
A1
6720
3048
3"- 8"
5/8
1"
B2
13440
1 1/4
44800
20320
16" - 24" 6096 2 1/2 4"- 12" 8 1/8
4 9/16"
170 3 7/8
164
1 1/4
B3
22400
1 1/2
56000
25400
8" - 18" 10160 2" 4"- 12" 8 1/8
5 1/8"
166 5 1/8
A2
13440
6096
4"- 12"
3/4
5 5/8
56000
25400
16" - 24"
2 1/2
8 1/8
5 1/8"
198
A3
22400 10160
4"- 12"
3/4
1 1/4
5 1/2
67200
30480
8" - 18"
2 1/2
8 1/8
5 1/8"
203
67200
30480
16" - 24"
3"
8 1/8
5 1/8"
236
A
B
C
C
D
A
B
C
To Accommodate
Inside Shackle Average
To Accommodate
Flange Width
Inside Shackle Average
To Accommodate
B
MODEL
WLL
at 0 Vertical Width Adjustment
Beam Flange
Crown to
Weight
B
MODEL WLL atA0 Vertical Adjustment
Web Thickness Beam Flange Thickness Crown
inch Beam
to
Weight
Average
inch min-max Thickness (max) inch. Spacer inch
Lbs
kg
Lbs
Jaw Grip kg Inside Shackle
Lbs
(max) inch.
L WLL at 0 Vertical
min-max
Spacer inch
(max) inch.
Lbs
Crown Weight
Adjustment
Lbs
kg
6720
3048
3"- 8"
1 1/8
4"
68
inch
Lbs 5/8
5 GBT1
1/4
A1
6720 inch
3048 to Spacer
3"- 8"
1"
46
13440
6096
4" - 12"
1 1/4
4"
127
34"3/812"
6720
3048
STD
AREA Rail
13 3/4
1 1/4
A2
13440
6096
5 GBT2
5/8
73
1 1/2
22400
10160
6"- 12"
5 1/8
183
& Crane Rail10160
11200 5080
21 3/4
44"1/412"
A3
22400
1 1/4
5 GBT3
1/2
105
GBT4
33600 15240
8"- 18"
3"
8"
354
11200 5080
33
Trolley Rail
4 1/4
GBT5
44800 20320
8"- 18"
3"
8 3/4"
440
A
B
C
To Accommodate Inside Shackle Average
MODEL
WLL at 0 Vertical Width Adjustment
Beam Flange
Crown to
Weight
B
C
A
inch min-max Thickness (max) inch. Spacer inch
Lbs
kg
Lbs
To Accommodate Inside Shackle Average
A
B
CA
D
Average
GBT1 To Fit Angle
6720 Jaw 3048
8" Crown Inside
1 1/8
4"
68
MODEL
WLL at 0 Vertical Width Adjustment
Beam Flange
Weight
Crown to
Shackle Weight
Aperture Inside3"-Shackle
WLL at 0 Vertical
GBT2 Sections
13440
6096
4"
- 12" inch
1 1/4
4"
127
inch min-max Thickness (max) inch. Spacer inch
Lbs
kg
Lbs
to Spacer
Width
inch
inch
Lbs
kg
Lbs
1
1/2
GBT3
22400
10160
6"- 12"
5 1/8
183
BA1
2240
1016
2 1/2 - 8
1"
4"
14
1120
508
1
1/2
4
9/16
4"
2
3/4
10
GBT4
33600
15240
8"- 18"
3"
8"
354
BA2
3360
1524
3"- 8"
1"
4"
15
2240
1016
1
1/2
4
9/16
3
3/4
2
3/4
10
GBT5
44800
20320
8"- 18"
3"
8 3/4"
440
BA3
4480
2032
3"- 8"
1"
4"
15
3 1/2
3360
1524
2"- 6"
7/8
2 7/8
24
6720
3048
4"- 8"
4"
4"
47
"
1
Horizontal Plate Clamps

Vertical Plate Lifting Clamp

B
C
A
A
Average
ToAverage
Accommodate Inside Shackle Designed
Average WLL
A
B
C
Weight
at
0
Vertical
A
Plate
Thickness
for
use
as
pairs
only
for
horizontal
plate lifting
MODEL
Designed
for
vertical
plate lifting
MODEL
WLL
Width
Adjustment
Weight camLbs
Crown to Toothed
Lbs
WLL at 0Vertical
Inch min-max
kg maximum
Adjustable
toatFit0 Vertical
Inside Shackle
Crown
Inside Shackle Beam
WeightFlange
toe
ensures
grip
and
hold
inch
min-max
Lbs
kg
Thickness
(max)
inch.
Lbs
Spacer
inch

Positive
grip
with
locking
mechanism
Lbs
kg Outside Diameter
to Spacer inch
Width inch
Lbs
PLC1
2239.89
1016 allow for
0 - 3/4
7of plate thickness
Standard
jaw
apertures
wide range 14
BA1 2 1/2steel
2 1/2
- 82 7/8 grip and
4"
14
PLC2
4479.79 2032
0 - 1 1/4
Hardened
knurled1016
cam
ensures
maximum
2240 1016
- 2240
4 1/2
3 7/8
151"hold
Equipped
with lifting3048
shackle 0 - 1 1/4
BA2to replace
3360
1524 3 7/8
3"- 8" 2 7/8
4"
15
PLC3
6719.68
20
3360 1524
4" - 7
281"
Easy
wear parts
BA3
4480
2032 3 7/8
3"- 8" 2 7/8
4"
15 to replace
PLC4
8959.58wear
4064
28
Easy
parts 0 - 1 1/4
4480 2032
- 9"
361"
Minimum 5"maintenance
6720
3048
7" - 11"
4"
58
3 3/4
6720
3048
8" - 13
4"
69
3 3/4
A
B
C
Average
A 3 3/4 Average
6720
3048
9" - 15"
4"
79
MODEL WLL at 0 Vertical Jaw Adjustability Inside Shackle Crown Inside Shackle Weight
Weight
6720
3048
10" WLL
- 17" at 0 Vertical 4"A Plate Thickness
110
3
3/4
MODEL
Lbs
kg
to Spacer inch
inch min-max
Width inch
Lbs
Lbs140
Lbs
kg 4 3/4 Inch min-max
8960
4064
12" - 19"
4 5/8
HPC-1
3360
1524
0
1
1/2
3 1/2
2 1/2
13
8960
4064
- 24"
PLC1 16" 2239.89
1016 4 3/4
0 - 3/4 4 5/8
7 169
HPC-2
4480
2032
0 - 2"
3 1/2
2 1/2
15
PLC2
4479.79 2032
0 - 1 1/4
14
5 1/4
HPC-3
6720
3048
0 - 3"
3 3/8
32
PLC3
6719.68 3048
0 - 1 1/4
20
HPC-4
8960
4064
0 - 4"
5 1/4
3 3/8
45
PLC4
8959.58 4064
0 - 1 1/4
28
A
B
C
Average
MODEL WLL at 0 Vertical Jaw Adjustability Inside Shackle Crown Inside Shackle Weight
Lbs
kg
to Spacer inch
inch min-max
Width inch 6 Lbs
HPC-1
3360
1524
0 - 1 1/2
3 1/2
2 1/2
13
HPC-2
4480
2032
0 - 2"
3 1/2
2 1/2
15

FALL PROTECTION
USC-3A
Proof Load Tested at 13,440 lbs.
Ideal in applications requiring fixed Anchorage Connector
(including vertical column locations)
S1
Ideal in application where Anchorage Connector is located overhead
Heavier duty USC or S series clamps may be used based on
beam flange or restricted side loading as detailed on page 10
Superclamp BA Series Trolleys

Ideal in application when a moveable Anchorage Connect is desired


One-piece fully adjustable design
Fast and safe installation and removal
Anti-drop plates for added security

Background
Since the revision to the OSHA regulations regarding Personal
Fall Arrest Systems were instituted, an urgent need has been
created for satisfactory methods of connecting the PFAS to the
suitable anchor, such as a beam. A brief review of the OSHA
regulations and ANSI Z359.1 indicated that SUPERCLAMP offers
a solution to most of their situations
ANSI Z359.2 section 3.2.5.1 states that the Anchorage
Connector shall be capable of withstanding a 5,000 pound
load and Anchorage connectors shall meet the strength
requirements of the anchorages to which they are coupled as set
forth in 7.2.3. This section requires a strength capable of
sustaining static loads, applied in the direction permitted by the
PFAS of at least: (a) 3,600 pounds when certification exists.
In keeping with the above, please take note that each and
every SUPERCLAMP unit is Proof Load Tested at 2:1 and each
is fully certified. As an added safety factor, each model has a
design factor of 5:1.
Additional
Please remember that in addition to our authorization and
certification of their products for Personnel Use, i.e. PFAS
Anchorage Connectors, General Clamp Industries, Inc. maintains
complete Product Liability insurance.
Also, on special request we can readily paint specific clamps
a distinctive color or provide distinctive markings to indicate
that they are For Personnel Use only. There may be a nominal
charge for this service.

TECHNICAL

SUPERCLAMP Products
Safety and Health
TM

Suppliers are generally required to make available information


relating to articles supplied to ensure that when you put to proper
use they are safe and without risk to health.

Unless we are informed at time of inquiry and order about


particular hazardous environmental conditions all equipment
is supplied on the assumption that it will be used in normal
atmospheric and temperature conditions as applicable within the
contiguous United States.

Experience over many years has not shown any particular


problems with regard to Health and Safety in connection with the
SUPERCLAMP products we manufacture and supply providing:

Working Load Limit

1. They are used for the purpose for which they were designed.

This is the maximum load which can be applied to the product


in service.

2. They are not loaded beyond their rated Working Load Limit.

It is of the utmost importance to Health and Safety to ensure


that SUPERCLAMP products are only attached to structures,
materials or other lifting components which are authentically and
authoritatively approved and recommended to carry or sustain
the working loads to be applied.

3. They are properly maintained.


4. They are inspected regularly and tested in accordance with
the relevant statutory regulations.
5. They are used by competent persons trained in their use.

All of our products exceed the provisions of OSH 29CFR Part


1910, 1918, 1926 and ANSI B30 as applicable.

Warning

General Information

Our products are marked with a WORKING LOAD LIMIT


which MUST NOT be exceeded. The manufacturer does not
accept any liability for damage which may result from the product
being used in excess of the Working Load Limit.

Our contribution to SAFETY is in securing the QUALITY and


RELIABILITY of our SUPERCLAMP products.
Each SUPERCLAMP product is proof tested to twice the Working
Loads Limit, unless otherwise stated or required by authoritative
recommendations. Tests to destruction ensuring a 5:1 factor of
safety are employed throughout the design, development and
manufacturing process of our products where required.

Ensure that existing endstops on runway beams will


accommodate SUPERCLAMP trolleys.
On occasion we supply replacement component parts for
SUPERCLAMP models, but we do not accept any responsibility
for these unless they are installed by a person with appropriate
knowledge and training and the statutory tests and inspections
are carried out on completion of repair.

TECHNICAL
Guidelines for the
Inspection and Safe Use of
SUPERCLAMP Equipment
TM

Inspection of SUPERCLAMP Equipment


General:

1) Follow all requirements of law, rules and regulations applicable in your country pertaining to lifting operations, ensuring all
maintenance, testing, inspection and operator training requirements are strictly adhered to. This is in your interest and can
prevent fatal accidents and industrial disaster.





2) Checklist:
Is any part of the equipment distorted?
Are any cracks visible, or is extensive corrosion evident?
Is any wear evident at suspension points, wheels, shackles, gears, pivots, pins, bolts, threads, springs or other moving parts?
Are locking arrangements functional and safe?
Are the Work Load Limit, serial numbers and other markings legible?
Have all inspections or tests been regularly recorded?

Safe use of SUPERCLAMP Equipment

1) Ensure that the selected SUPERCLAMP equipment is of a suitable type for the lifting or suspension operation you intend to
undertake.
2) Ensure that structures to which SUPERCLAMP equipment may be fitted are of adequate design and comply with all legal
requirements. Structures designed for lifting operation purposes are usually marked with the Working Load Limit which may
not be exceeded. Ensure that structures are tested and certified for such use and that the appropriate certificate is current.
3) Never stand beneath a suspended load.
4) SUPERCLAMP products are primarily designed for in-line use only, and the equipment is thus marked. Never use SUPERCLAMP
products for side loading applications unless this is specifically recommended on the original SUPERCLAMP identification
plate affixed to the unit. If the identification plate states that the unit must be used at 0 degrees only, then NO side loading/
angle loading is permitted.
5) Never use a single clamp as a lifting point on a beam/girder. Always use two or more clamps to ensure a stable lift: use a
spreader beam when applicable.
6) SUPERCLAMP products must not be attached to defective structure or materials. Ensure that runway beams are fitted with
endstops and are free from defects. Should a defect on a runway beam or structural member be observed, remove the
SUPERCLAMP unit immediately and report your observations to your supervisor.
7) When selecting SUPERCLAMP products, ensure that the calculated working load limit requirement allows for any additional
weight of equipment which may be suspended together with the original load to enable the lifting operation to take place.
8) Ensure that all mechanisms on SUPERCLAMP products are working freely before being used for the application intended.
9) Never replace worn components except with original SUPERCLAMP parts. Where products are fitted with replaceable jaws,
incorporating teeth showing wear, it is strictly prohibited to recut or resharpen these. Cams or jaws incorporating teeth can
be easily replaced with original SUPERCLAMP components from your approved SUPERCLAMP distributor.
10) Always ensure that repaired products are inspected and tested in accordance with the laws of your country prior to being
released for operation.
11) Ensure that all persons using SUPERCLAMP equipment are properly trained in performing lifting operations and competently
using this type of equipment.

TECHNICAL
12) If multipoint lifting operation are undertaken, always ensure that no single SUPERCLAMP unit or single point of lift is at
any time required to exceed its maximum working load limit. Do not exceed angle ratings at any time as this may prove
excessively dangerous.
13) Always ensure that parts are reassembled correctly after disassembly or repair.
14) Never throw or drop any SUPERCLAMP equipment as this may be hazardous or may cause injury to people or plant.
15) If in doubt about the suitability of SUPERCLAMP products for your application, contact your nearest distributor or the factory.
16) Your nearest SUPERCLAMP distributor will advise on applications if required.

MINIMUM RADIUS FOR RUNWAY BEAM TROLLEYS


BA - Series

4.9 foot radius / 1.5 metre radius

B - Series

4.9 foot radius / 1.5 metre radius

A - Series

4.9 foot radius / 1.5 metre radius

GBT - 1/2/3

4.9 foot radius / 1.5 metre radius

GBT - 4/5

6.5 foot radius / 2.0 metre radius

MAY BE SAFELY USED AT A 15 DEGREE


ANGLE WITHOUT REDUCTION OF
WORKING LOAD LIMIIT

SIDE LOADED ACROSS


THE BEAM ONLY

Reduction In Working Load Limits When Side Loads Applied


Angle From Vertical
0 - 15
16 - 30
Reduction Factor
NIL
17%
Models
WLL/lb
WLL/lb
S2A, S5A
6,720
5,577
S3
8,960
7,436
S3X, S3A, S6A
11,200
9,296
S4S
13,440
11,155
S4A, S11
22,400
18,592
S12, 214
33,601
27,888
S15, S16
44,800
37,184
S17, S18
56,000
46,480
S19, S20
67,200
55,776

31 - 45
34%
WLL/lb
4,435
5,913
7,392
8,870
14,784
22,176
29,568
36,960
44,352

The above working load limits and deviations have been established specifically for most s type clamps and only in overhead
beam attachment, i.e. do not apply if clamps are to be used for lifting beams. (The Universal SUPERCLAMP USC has been
specifically designed for this purpose.) The tables apply to our clamps only (selected models) and we strongly advise that stress
calculations should be carried out (by the users engineering department) for any/all support steel work.
WARNING: All clamps must be correctly applied to the beam by a competent person and fully hand
tightened. If in doubt, contact the manufacturer for their recommendations.

10

TECHNICAL
SUPERCLAMP HEADROOM CHART
TM

Measurement is taken from under side of beam to load bearing point of inner crown of shackle.

MODEL

S1

ADJUSTMENT
MIN

ADJUSTMENT
MAX

HEADROOM AT
MIN

HEADROOM AT
MAX

7.5

8.25

6.25

S2

7.5

8.5

7.5

S2A

7.5

8.5

S3

10

10.5

9.75

S3A

12

11.5

10.5

S3X

7.5

9.5

8.75

S4A

18

16

13.75

S4S

18

16

13.75

S5

3.5

12

11.75

8.75

S5A

3.5

12

12.25

9.25

S6

3.5

12

12.25

9.25

S6A

3.5

12

12.5

9.5
7.5

S7

7.5

8.5

S7A

7.5

8.5

7.5

S8

10

10.5

9.75

S8A

10

10.5

9.75

S11

3.5

12

13.5

11.5

S12

18

19.5

16.75

S14

16

24

22.25

19

S15

18

20.5

18.5

S16

16

24

22.5

19.25

S17

18

20.25

17

S18

16

24

22.75

19.75

S19

18

20.25

17

S20

16

24

22.75

20.25

BA1

2.5

9.75

BA2

9.75

BA3

9.75

B1

11

9.5

B2

12

14

12

B3

12

15

13

GBT1

11

9.5

GBT2

12

14

12

GBT3

12

15.75

13.75

GBT4

18

23

19.5

A1

A2

12

17

12

19

PFC1

A3
3

7.5

5.5

4.5

PFC2

7.5

5.5

4.5

11

TECHNICAL
SUPERCLAMP Specifications

B. Due to the design and engineering features of SUPERCLAMP,


it will not slide, slip or shudder during the lifting operation.
C. SUPERCLAMP products are designed with a 5:1 Factor of
Safety.
D. Each clamp is issued with a Certificate of Test and Examination.
E. SUPERCLAMP as a lifting tool either singularly or in pairs (i.e.
in the lifting of spreader beams) is undoubtedly the safest
means available.

The SUPERCLAMP Trade Mark is synonymous with excellence


in practical design, effective safety and assured quality control.
SUPERCLAMP products are engineered with the aim to provide
safety, efficiency and durability.
Originally designed and internationally patented as a beam
clamp, SUPERCLAMP products may be used for both hoisting
and lifting applications. The line has been expanded to include
Runway Beam Trolleys designed like the original SUPERCLAMP
to be a one piece fully adjustable trolley. Recently, a new design,
the Universal SUPERCLAMP was added to the line. This model
is designed to be used at full rated capacity at angles up to 90
degrees in a 360 degree radius.

Speed of Application
A. The left and right hand threaded bar means the superclamp
can easily be adjusted to facilitate application and can be
hand tightened in a matter of seconds to give maximum
positive hold.
B. Similarly the SUPERCLAMP can be disengaged in seconds
without involving the user in any untidy and dangerous
operation.
C. Before and after application, SUPERCLAMP remains a
complete unit with no loose component parts. All component
parts of SUPERCLAMP are an integrated and fixed part of its
mechanical function.

General Specifications
Design exceeds 5:1 factor of safety. Periodic tests to destruction
are performed to ensure this.
Each unit is Proof Load Tested at 2:1, and comes with a
Certificate of Test and Evaluation.
Units are individually serial numbered to assist with traceability.
Side plates are ASTM A588 steel.
Lifting shackle is fully heat treated and normalized.
All welding procedures are AWD D1.1 certified.
Each unit is one piece, fully adjustable and includes attached
lifting shackle.
All trolleys include anti-drop plates as an integral part of the
structure.
Design is covered by U.S. and foreign patents.
Clamp adjustability range and jaw size are designed to ensure
optimum contact with the beam flange to ensure personnel and
equipment safety.
All designs meet or exceed existing codes and regulations,
including ANSI/ASME B30.20, Below the Hook Lifting Devices.
Full Product Liability Insurance coverage is maintained.
Manufacturing in the U.S.A.

Versatility
A. The tremendous adjustability of SUPERCLAMP means that very
often one unit can be employed in various applications and
situations where alternative methods involve up to three or
more individual units. In short, one SUPERCLAMP replaces
three of anyone elses.
B. SUPERCLAMP is sold into a worldwide range of industries
with many varied applications: Wherever there is a lifting
situation!

Cost Savings
We have a recertification program where the clamp can be
returned to us to be repaired, load tested, and recertified. This is
more cost effective and time efficient then replacing the clamp.

In use in the Mining; On and Off Shore Mineral Exploration;


General Maintenance and Construction industries; SUPERCLAMP
continues to lead the way in safe lifting applications.

Quality and Reliability


SUPERCLAMP products are manufactured to the highest
standards using the finest materials available:

SUPERCLAMP Benefits and Advantages


Safety

High Tensile Steel: Shackle, bolts, sideplates


Mild Steel: Threaded bar, jaw assemblies

A. There is no doubt that SUPERCLAMP as an anchor point offers


probably the safest method of attaching and securing to an
overhead girder or arch beam section.

SUPERCLAMP products are easily stored in one piece and are


readily available for maintenance and inspection.

12

NOTES

13

GENERAL CLAMP
INDUSTRIES, INC.
1155 Central Florida Parkway
Orlando, FL 32859
(407) 859-6000 Fax: (407) 857-9146
Toll Free: (800) 327-0300
Visit our web site at

www.superclamp.com
or send an e-mail to

information@superclamp.com

Your Local SUPERCLAMP Distributor is:

Das könnte Ihnen auch gefallen